Chitosan for wastewater treatment

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

Preparation and Characterization of High-Efficiency Magnetic Heavy Metal Capture Flocculants

In this study, a high-efficiency magnetic heavy metal flocculant MF@AA was prepared based on carboxymethyl chitosan and magnetic Fe3O4. It was characterized by SEM, FTIR, XPS, XRD and VSM, and the Cu(II) removal rate was used as the evaluation basis for the preparation process. The effects of AMPS content, total monomer concentration, photoinitiator concentration and reaction time on the performance of MF@AA flocculation to remove Cu(II) were studied. The characterization results show that MF@AA has been successfully prepared and exhibits good magnetic induction characteristics. The synthesis results show that under the conditions of 10% AMPS content, 35% total monomer concentration, 0.04% photoinitiator concentration, and 1.5 h reaction time, the best yield of MF@AA is 77.69%. The best removal rate is 87.65%. In addition, the response surface optimization of the synthesis process of MF@AA was performed. The optimal synthesis ratio was finally determined as iron content 6.5%, CMFS: 29.5%, AM: 53.9%, AMPS: 10.1%. High-efficiency magnetic heavy metal flocculant MF@AA shows excellent flocculation performance in removing Cu(II). This research provides guidance and ideas for the development of efficient and low-cost flocculation technology to remove Cu(II) in wastewater.

Characterization of Different Salt Forms of Chitooligosaccharides and Their Effects on Nitric Oxide Secretion by Macrophages

In this paper, chitooligosaccharides in different salt forms, such as chitooligosaccharide lactate, citrate, adipate, etc., were prepared by the microwave method. They were characterized by SEM, FTIR, NMR, etc., and the nitric oxide (NO) expression was determined in RAW 264.7 cells. The results showed that pure chitooligosaccharide was an irregular spherical shape with rough surface, and its different salt type products are amorphous solid with different honeycomb sizes. In addition to the characteristic absorption peaks of chitooligosaccharides, in FTIR, the characteristic absorption of carboxyl group, methylene group, and aromatic group in corresponding acid appeared. The characteristic absorption peaks of carbon in carboxyl group, hydrogen and carbon in methyl, methylene group, and aromatic group in corresponding acid also appeared in NMR. Therefore, the sugar ring structure and linking mode of chitooligosaccharides did not change after salt formation of chitooligosaccharides. Different salt chitooligosaccharides are completely different in promoting NO secretion by macrophages, and pure chitooligosaccharides are the best.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Bionic chitosan-carbon imprinted aerogel for high selective recovery of Gd(Ⅲ) from end-of-life rare earth productions

High selective recovery of Gd(Ⅲ) from end-of-life rare earth productions is essential for cleaner production. Chitosan(CS), a biomaterial, has shown excellent results in water treatment. The amino and hydroxyl groups on the surface of CS play a vital role in adsorbing metal ions. Polydopamine has good stability, strong water dispersibility, and excellent biocompatibility. As a bio-crosslinking agent, the amino and phenolic hydroxyl groups on its surface can be combined with metal ions to help the material absorb metal ions. This paper combines the active groups of biomimetic materials and the mechanical properties of new nanomaterials multi-walled carbon nanotubes and graphene oxide, and prepared a high-performance chitosan-based aerogel MWCNT-PDA-CS-GO through heat and mass transfer at low temperature and low pressure. The adsorption mechanism of MWCNT-PDA-CS-GO for Gd(Ⅲ) was analyzed through a series of characterization and adsorption experiments. At pH 7.0, the maximum adsorption capacity of aerogel for Gd(Ⅲ) reached 150.86 mg g^-1. The relative selectivity of imprinted ions is 48.02 times higher than other ions. All the results indict MWCNT-PDA-CS-GO aerogel exhibits excellent selectivity and stability for effective recovery of Gd(Ⅲ).

Efficient removal of diclofenac from surface water by the functionalized multilayer magnetic adsorbent: Kinetics and mechanism

Developing robust and effective adsorbent for removing ubiquitous pharmaceutical diclofenac (DCF) from the aquatic environment is vitally important for environmental safety. Hence, a novel chitosan-based multilayer adsorbent (FCS-PD) with magnetic separation ability and surface functionality was successfully assembled, which had countless potential for removing contaminants from water. A series of instrumental technologies were performed to demonstrate the physicochemical properties of FCS-PD. Its adsorption performance toward DCF removal was comprehensively evaluated in synthetic water and surface water. The effects of microplastics, inorganic ions and humic acid on the adsorption were investigated. The maximum adsorption capacity of FCS-PD was calculated as 434.78 mg/g under neutral conditions, exhibiting superior adsorption performance than most reported adsorbents. The DCF in surface water was practically removed at low concentration (50 μg/L). FCS-PD presented a multistage kinetics controlled by chemisorption and intraparticle diffusion, which was emphasized by the pseudo-second-order kinetic and intra-particle diffusion analysis. After five cycles of adsorption and regeneration, the adsorption capacity only decreased by 9.9%, indicating the satisfactory regeneration of FCS-PD. The analysis of high-resolution X-ray photoelectron spectroscopic (XPS) and Fourier transform infrared spectroscopy (FTIR) revealed that the quaternary ammonium groups on the outer layer and the amino and hydroxyl groups on the chitosan layer are involved in the capture of DCF under electrostatic force and hydrogen bonding.

One-step sustainable synthesis of cationic high-swelling polymers obtained from starch-derived maltodextrins

The good water solubility displayed by most starch-derived maltodextrins has limited their use when specific mechanical properties are required, particularly when working in aqueous media. As a result, numerous attempts to cross-link such polysaccharides to obtain cross-linked polymers have been reported; in this context, non-toxic and biocompatible water-soluble diglycidyl ethers have performed well. Besides, amines are commonly used as curing agents in combination with diglycidyl ethers for the production of epoxy resins. For this reason, amine-mediated epoxy ring-opening reactions of 1,4-butanediol diglycidyl ether have been studied as approaches to obtain sustainable cross-linked polymers suitable for eco-friendly scaling-up, based upon commercial starch-derived maltodextrins, using water as a unique solvent.

A theoretical mathematical model for assessing diclofenac release from chitosan-based formulations

The paper reports a new mathematical model for understanding the mechanism delivery from drug release systems. To do this, two drug release systems based on chitosan and diclofenac sodium salt as a drug model, were prepared by in situ hydrogelation in the presence of salicylaldehyde. The morphology of the systems was analyzed by scanning electron microscopy and polarized light microscopy and the drug release was in vitro investigated into a medium mimicking the in vivo environment. The drug release mechanism was firstly assessed by fitting the in vitro release data on five traditional mathematical model. In the context of pharmacokinetics behavioral analysis, a new mathematical procedure for describing drug release dynamics in polymer-drug complex systems was proposed. Assuming that the dynamics of polymer-drug system's structural units take place on continuous and nondifferentiable curves (multifractal curves), it was showed that in a one-dimensional hydrodynamic formalism of multifractal variables the drug release mechanism is given through synchronous dynamics at a differentiable and non-differentiable scale resolutions.

Chitosan-Based Nanocomposites for Glyphosate Detection Using Surface Plasmon Resonance Sensor

This article describes an optical method based on the association of surface plasmon resonance (SPR) with chitosan (CS) film and its nanocomposites, including zinc oxide (ZnO) or graphene oxide (GO) for glyphosate detection. CS and CS/ZnO or CS/GO thin films were deposited on an Au chip using the spin coating technique. The characterization, morphology, and composition of these films were performed by Fourier-transform infrared spectroscopy (FTIR), atomic force microscopy (AFM), and contact angle technique. Sensor preparation conditions including the cross-linking and mobile phase (pH and salinity) were investigated and thoroughly optimized. Results showed that the CS/ZnO thin-film composite provides the highest sensitivity for glyphosate sensing with a low detection limit of 8 nM and with high reproducibility. From the Langmuir-type adsorption model and the effect of ionic strength, the adsorption mechanisms of glyphosate could be controlled by electrostatic and steric interaction with possible formation of 1:1 outer-sphere surface complexes. The selectivity of the optical method was investigated with respect to the sorption of glyphosate metabolite (aminomethylphosphonic acid) (AMPA), glufosinate, and one of the glufonisate metabolites (3-methyl-phosphinico-propionic acid) (MPPA). Results showed that the SPR sensor offers a very good selectivity for glyphosate, but the competition of other molecules could still occur in aqueous systems.

Investigation of the specularite/chlorite separation using chitosan as a novel depressant by direct flotation

Chlorite is one of the representative iron-bearing silicates gangue minerals existed in the specularite ores which the traditional depressants are incapable of action in specularite/chlorite separation flotation. An attempt was conducted for the separation of specularite/chlorite with chitosan as a novel depressant through microflotation tests, Zeta potential measurements, adsorption tests, FT-IR, and XPS analysis. The microflotation results show that chitosan selectively depresses chlorite while specularite still keeps in high floatability. Zeta potential measurements and adsorption tests indicate that chitosan mainly adsorbed on chlorite surface, hindering the subsequent adsorption of dodecan-1-amine and leading the hydrophobicity distinction. The FT-IR spectra of chlorite validate the adsorption of chitosan on chlorite. The results of XPS illustrate that electrons partially transferred from chitosan to the aluminum, iron, magnesium, silicon, and adjacent oxygen atoms of silicon atoms in chlorite during the adsorption process.

Sequestration of Sulfate Anions from Groundwater by Biopolymer-Metal Composite Materials

Binary (Chitosan-Cu(II), CCu) and Ternary (Chitosan-Alginate-Cu(II), CACu) composite materials were synthesized at variable composition: CCu (1:1), CACu1 (1:1:1), CACu2 (1:2:1) and CACu3 (2:1:1). Characterization was carried out via spectroscopic (FTIR, solids C-13 NMR, XPS and Raman), thermal (differential scanning calorimetry (DSC) and TGA), XRD, point of zero charge and solvent swelling techniques. The materials' characterization confirmed the successful preparation of the polymer-based composites, along with their variable physico-chemical and adsorption properties. Sulfate anion (sodium sulfate) adsorption from aqueous solution was demonstrated using C and CACu1 at pH 6.8 and 295 K, where the monolayer adsorption capacity (Qm) values were 288.1 and 371.4 mg/g, respectively, where the Sips isotherm model provided the "best-fit" for the adsorption data. Single-point sorption study on three types of groundwater samples (wells 1, 2 and 3) with variable sulfate concentration and matrix composition in the presence of composite materials reveal that CACu3 exhibited greater uptake of sulfate (Qe = 81.5 mg/g; 11.5% removal) from Well-1 and CACu2 showed the lowest sulfate uptake (Qe of 15.7 mg/g; 0.865% removal) from Well-3. Generally, for all groundwater samples, the binary composite material (CCu) exhibited attenuated sorption and removal efficiency relative to the ternary composite materials (CACu).

Solubility and Selectivity Effects of the Anion on the Adsorption of Different Heavy Metal Ions onto Chitosan

The biopolymer chitosan is a very efficient adsorber material for the removal of heavy metal ions from aqueous solutions. Due to the solubility properties of chitosan it can be used as both a liquid adsorber and a solid flocculant for water treatment reaching outstanding adsorption capacities for a number of heavy metal ions. However, the type of anion corresponding to the investigated heavy metal ions has a strong influence on the adsorption capacity and sorption mechanism on chitosan. In this work, the adsorption capacity of the heavy metal ions manganese, iron, cobalt, nickel, copper, and zinc were investigated in dependence on their corresponding anions sulfate, chloride, and nitrate by batch experiments. The selectivity of the different heavy metal ions was analyzed by column experiments.

Removal of Boron and Manganese Ions from Wet-Flue Gas Desulfurization Wastewater by Hybrid Chitosan-Zirconium Sorbent

Flue gas desulfurization (FGD) wastewater, after the alkaline precipitation and coagulation processes, often requires additional treatment in order to reduce the concentrations of boron and heavy metals below the required limits. In this study, we present an innovative and environmentally friendly method for boron and manganese removal that is based on a hybrid chitosan-zirconium hydrogel sorbent. The results from the batch adsorption experiment indicated that the uptake capacity for boron and manganese was equal to 1.61 mg/g and 0.75 mg/g, respectively, while the column study indicated that the total capacity of boron and manganese was equal to 1.89 mg/g and 0.102 mg/g, respectively. The very good applicability of the Langmuir isotherm at 25 °C suggested the monolayer coverage of the boron species onto the hybrid chitosan-zirconium hydrogel with a maximum adsorptive capacity of 2 mg/g. The amounts of boron and manganese in purified water could be decreased to less than 1 mg/dm³ and 0.05 mg/dm³, respectively, starting from the initial concentration of boron equal to 24.7 mg/dm³ and manganese equal to 3.0 mg/dm³ in FGD wastewater. Selective desorption of boron from the loaded bed was favorable when a NaOH solution was used, while manganese was preferentially eluted with a HCl solution. It is important to note that such an innovative method was investigated for the first time by testing borax recovery from wastewater in terms of an eco-technological perspective.

Application of Chitosan-Clay Biocomposite Beads for Removal of Heavy Metal and Dye from Industrial Effluent

In recent years, there has been increasing interest in developing green biocomposite for industrial wastewater treatment. In this study, prawn-shell-derived chitosan (CHT) and kaolinite rich modified clay (MC) were used to fabricate biocomposite beads with different compositions. Prepared composite beads were characterized by FTIR, and XRD, and SEM. The possible application of the beads was evaluated primarily by measuring the adsorption efficiency in standard models of lead (II) and methylene blue (MB) dye solution, and the results show a promising removal efficiency. In addition, the composites were used to remove Cr (VI), Pb (II), and MB from real industrial effluents. From tannery effluent, 50.90% of chromium and 39.50% of lead ions were removed by composites rich in chitosan and 31.50% of MB was removed from textile effluent by a composite rich in clay. Moreover, the composite beads were found to be activated in both acidic and basic media depending on their composition, which gives a scope to their universal application in dye and heavy metal removal from wastewater from various industries.

Wound healing and antimicrobial effect of active secondary metabolites in chitosan-based wound dressings: A review

Wound healing can lead to complex clinical problems, hence finding an efficient approach to enhance the healing process is necessary. An ideal wound dressing should treat wounds at reasonable costs, with minimal inconveniences for the patient. Chitosan is one of the most investigated biopolymers for wound healing applications due to its biocompatibility, biodegradability, non-toxicity, and antimicrobial activity. Moreover, chitosan and its derivative have attracted numerous attentions because of the accelerating wound healing, and easy processability into different forms (gels, foams, membranes, and beads). All these properties make chitosan-based materials particularly versatile and promising for wound dressings. Besides, secondary natural metabolites could potentially act like the antimicrobial and anti-inflammatory agents and accelerate the healing process. This review collected almost all studies regarding natural compounds applications in wound healing by focusing on the chitosan-based bioactive wound dressing systems. An accurate analysis of different chitosan formulations and the influence of bioactive compounds on their wound healing properties are reported.

Chitosan Biopolymer from Crab Shell as Recyclable Film to Remove/Recover in Batch Ketoprofen from Water: Understanding the Factors Affecting the Adsorption Process

Seafood, a delight for many people, is sold in the market as a wide variety of products. However, seafood industries produce many by-products; for example, during the processing, the heads and shells of shellfish are generated as waste. This results in the generation of a large amount of shell waste that is accumulated over time, inducing a major environmental concern. Effective solutions for recycling shell waste should be taken into consideration, and the extraction of commercially useful substances like chitin and its derivates, such as chitosan, could be a valid solution for reducing the seafood waste’s environmental impact. Thus, during this work, we propose the use of chitosan as biowaste, to induce the formation of solid films useful for decontaminating water from emerging pollutants. In particular, ketoprofen was used as a model contaminant, and a high percentage of removal, at least 90%, was obtained in a short time under our experimental conditions. Thus, a comprehensive investigation into the adsorption of ketoprofen onto chitosan film was performed, detailing the nature of the adsorption by studying the effects of pH, temperature changes, and electrolyte presence in the solutions containing the pollutant. The process was found to be pH-dependent, involving meanly electrostatic interactions between the pollutant molecules and chitosan. The endothermic character of the adsorption was inferred. The kinetics of the process was investigated, showing that the pseudo second-order kinetic model best fit the experimental data. A recycling process of the adsorbent was proposed; therefore, the adsorbed pollutant can be recovered by reusing the same adsorbent material for further consecutive cycles of adsorption without affecting the efficiency for ketoprofen removal from water.

Bio-crosslinking of chitosan with oxidized starch, its functionalization with amino acid and magnetization: As a green magnetic support for silver immobilization and its catalytic activity investigation

In this study, we have reported the synthesis and characterization of new magnetic bionanocatalyst based on chitosan and investigated their catalytic activity in the A³-coupling reaction. In order to increase the stability of chitosan, starch oxide biopolymer was used as a green covalent linking agent between chitosan chains. After the cross-linking of chitosan with starch oxide, aldehyde functional groups were reacted with amine groups of cysteine to form the corresponding Schiff bases in the hybrid biopolymer. Then, the imine bonds were reduced to prevent possible their hydrolysis. The magnetic support was resulted with addition of iron oxide nanoparticles. In the presence of thiol and carboxylate coordinated groups of amino acid, silver ions were immobilized on this biosupport.

Chitosan Film as Eco-Friendly and Recyclable Bio-Adsorbent to Remove/Recover Diclofenac, Ketoprofen, and their Mixture from Wastewater

This paper reported the first example on the use of chitosan films, without further modification, to remove and recover, through bio-sorption processes, the emerging pollutant Diclofenac from water. The latter was adopted as a model, among non-steroidal anti-inflammatory drugs, by obtaining a maximum adsorption capacity, q_max, on chitosan of about 10 mg/g, under the applied experimental conditions of work. The literature gap about the use of chitosan films, which was already used for dyes and heavy metals removal, to adsorb emerging pollutants from water was covered, claiming the wide range application of chitosan films to remove a different class of pollutants. Several parameters affecting the Diclofenac adsorption process, such as the pH and ionic strength of solutions containing Diclofenac, the amount of the bio-sorbent and pollutant, and the temperature values, were investigated. The kinetics and the adsorption isotherms, along with the thermodynamic parameters (ΔG°, ΔH°, and ΔS°) were also evaluated. The process occurred very efficiently, and Chitosan/Diclofenac amounts dependent, remove about the 90% of the pollutant, in 2 h, from the tested solutions, through electrostatic interaction involving the carboxylic moiety of Diclofenac and Chitosan amino groups. This finding was confirmed by the pH and salt effects on the bio-sorption process, including swelling measurements of Chitosan films and by FTIR-ATR analysis. In detail, the maximum adsorption was observed at pH 5, when pollutant and Chitosan were negatively and positively charged, respectively. By reducing or increasing the pH around this value, a reduced affinity was observed. Accordingly, the presence of salts retarded the Diclofenac removal screening its charges, which hinders the interaction with Chitosan. The sorption was spontaneous (ΔG° < 0) and endothermic (ΔH° > 0) following the pseudo-second order kinetic model. The process was Diclofenac and Chitosan amount dependent. In addition, the Freundlich and Temkin isotherms well described the process, which showed the heterogeneous character of the process. Experiments of the complete desorption were also performed by using NaCl solutions 0.25 M (like sea water salt concentration) proposing the reuse of the pollutant and the recycling of the bio-sorbent lowering the associated costs. The versatility of the adsorbent was reported by exploring the possibility to induce the Diclofenac light-induced degradation after the adsorption and by-products adsorption onto chitosan films. To emphasize the chitosan capacity of treating water, the removal of another pollutant such as Ketoprofen and the mixture of Diclofenac and Ketoprofen were investigated. In this way, a green and eco-friendly production-pollution prevention technology for removing emerging pollutants from water was presented, which reduced the overall environmental impact. This illustrated experiments both in static and dynamic conditions for potential industrial applications.

Interpolyelectrolyte complexes: advances and prospects of application

Advances in the development of water-soluble nonstoichiometric polyelectrolyte complexes, which are characterized by high stability and can be involved in competitive interpolyelectrolyte reactions, are summarized and analyzed. The complexes remain stable over a wide range of external conditions (pH, ionic strength, temperature), but show a rapid, reversible and highly sensitive response to environmental changes outside this range by changing the phase state. The review considers methods of preparation and properties of nonstoichiometric polyelectrolyte complexes formed by interactions between oppositely charged polyelectrolytes. These reagents can be used for controlled modification of various surfaces, the preparation of soluble complexes functionalized by different molecules, the suppression and prevention of protein aggregation. The review briefly summarizes new types of soluble polyelectrolytes and polyelectrolyte complexes of different nature and with different structures, including biopolymers and dendrimers, suitable for solving problems in medicine and agricultural biotechnology. In order to evaluate the results achieved, there is a need to integrate and analyze the data on interpolyelectrolyte reactions, which are of most interest for a wide range of researchers.

The bibliography includes 118 references.

Crosstalk between chitosan and cell signaling pathways

The field of tissue engineering (TE) experiences its most exciting time in the current decade. Recent progresses in TE have made it able to translate into clinical applications. To regenerate damaged tissues, TE uses biomaterial scaffolds to prepare a suitable backbone for tissue regeneration. It is well proven that the cell-biomaterial crosstalk impacts tremendously on cell biological activities such as differentiation, proliferation, migration, and others. Clarification of exact biological effects and mechanisms of a certain material on various cell types promises to have a profound impact on clinical applications of TE. Chitosan (CS) is one of the most commonly used biomaterials with many promising characteristics such as biocompatibility, antibacterial activity, biodegradability, and others. In this review, we discuss crosstalk between CS and various cell types to provide a roadmap for more effective applications of this polymer for future uses in tissue engineering and regenerative medicine.

Antibacterial activity of chitosan nano-composites and carbon nanotubes: A review

Bacteriological contamination of water sources is a major challenge that has a detrimental impact on both the environment and human health. This imposes the search for the most efficient disinfectant. Despite their antibacterial efficiency, traditional methods can often form disinfection byproducts through their reaction with organic and inorganic compounds. Substitutes for conventional bacterial inactivation methods should not produce harmful byproducts and must also be cost effective. Nanotechnology is an attractive option that is suited for surface reactions as nanostructures offer large surface to volume ratios. Technologies using chitosan-modified nanocomposites and carbon nanotubes have proven to offer promising alternatives for bacterial inactivation. To enhance their antibacterial efficiency, such technologies have been modified chemically and physically and have as well been associated with other treatment techniques. However, despite their high bacterial disinfection efficacy and lack of treatment byproducts, the vagueness in bacterial inactivation mechanisms and complexity in materials preparation have often obscured their wide scale application. The aim of this manuscript is to review the recent advances in bacterial disinfection using nanomaterials, in the form of chitosan and carbon nanotubes. The rapid rate of research and the notable progress in this area dictate the frequent compilation and dissemination of recent introductions to this field. Existing gaps in the literature are thus also highlighted and reported discrepancies are pinpointed so that roadmaps for future studies may be figured.

Chitosan Hydrogel Beads Supported with Ceria for Boron Removal

In this study, a chitosan hydrogel supported with ceria (labelled Ce-CTS) was prepared by an encapsulation technique and used for the efficient removal of excess B(III) from aqueous solutions. The functionalisation of chitosan with Ce(IV) and the improvement in the adsorptive behaviour of the hydrogel were determined by SEM-EDS, FTIR, XRD, and inductively coupled plasma optical emission spectrometer (ICP-OES) analyses and discussed. The results demonstrate that Ce-CTS removes boric acid from aqueous solutions more efficiently than either cerium dioxide hydrate or raw chitosan beads, the precursors of the Ce-CTS biosorbent. The maximum adsorption capacity of 13.5 ± 0.9 mg/g was achieved at pH 7 after 24 h. The equilibrium data of boron adsorption on Ce-CTS fitted the Freundlich isotherm model, while the kinetic data followed the Elovich pseudo-second-order model, which indicated that the process was non-homogeneous. The dominant mechanism of removal was the reaction between boric acid molecules and hydroxyl groups bound to the ceria chelated by chitosan active centres. Due to its high efficiency in removing boron, good regeneration capacity and convenient form, Ce-CTS may be considered a promising biosorbent in water purification.

Recovery of chitin and chitosan from shrimp waste with microwave technique and versatile application

ABSTRACT: In this study, chitin and chitosan were extracted from Litopenaeus vannamei waste using chemical and microwave methods. Shrimp waste was cleaned, dried and ground sieved to 16, 32 and 60 mesh, and the samples were depigmented, demineralized, and deproteinized. Then, the chitin was submitted to a deacetylation process by 45% NaOH solution under microwave irradiation at 600w, for intermittent 15 min or using 5 pulses of 5 minutes. The study showed that the effectiveness of the particle size of 32 mesh and 6 pulses of 5 min to deacetylation with 92% of degree and chitosan yield (52.2%). The polymer chitosan showed higher antimicrobial activity against to Staphylococcus aureus, Escherichia coli, Salmonella enterica and the yeast Candida sp., respectively. The results indicated the feasibility of the microwave radiation as an attractive method to recover chitin and chitosan from shrimp wastes.

A Ti-doped γ-Fe2O3/SDS nano-photocatalyst as an efficient adsorbent for removal of methylene blue from aqueous solutions

Synthetic dyes are among the most important environmental pollutants in wastewaters. Consequently, elimination of the synthetic dyes from wastewaters using non-toxic materials and eco-friendly technologies has been of considerable interests. In this study, magnetically separable Ti-doped γ-Fe₂O₃ photocatalysts were synthesized for the removal of methylene blue (MB) from a dye-contaminated aqueous solution (as a model of dye-polluted wastewaters). Compared to the pristine γ-Fe₂O₃, the 1.78 v% Ti-doped γ-Fe₂O₃ significantly increased the adsorption of MB by 57% in the dark condition as a result of the improved BET surface area in this photocatalyst. Moreover, the contact time required for the photocatalytic degradation of MB by the 1.78 v% Ti-doped γ-Fe₂O₃ decreased due to the higher concentration of charge carriers in this photocatalyst than that of the pristine γ-Fe₂O₃. The effect of different experimental parameters on the adsorption property and photocatalytic activity of the 1.78 v% Ti-doped γ-Fe₂O₃ photocatalyst showed that the solution pH had a remarkable influence on the removal performance of this photocatalyst. Surface treatment of the 1.78 v% Ti-doped γ-Fe₂O₃ with sodium dodecyl sulfate (SDS) resulted in the formation of a negatively charged Ti-doped γ-Fe₂O₃/SDS photocatalyst, which showed a higher tendency for the adsorption and removal of MB than the untreated photocatalyst. Moreover, the MB removal efficiency of this photocatalyst was among the best performances that have been reported for the γ-Fe₂O₃-based photocatalysts. The synthesized photocatalysts were characterized by various techniques, and a plausible mechanism for the removal of MB from aqueous solutions by the Ti-doped γ-Fe₂O₃/SDS photocatalyst was purposed.

Palladium immobilized on in situ cross-linked chitosan superfine fibers for catalytic application in an aqueous medium

Chitosan composite superfine fibers with a diameter of 321 ± 99 nm were prepared by electrospinning with PEO as the co-spinning polymer and itaconic acid as the in situ cross-linking agent.