Formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus: the 1.85 A resolution crystal structure and its mechanistic implications

The archaeon Pyrococcus horikoshii possesses a bifunctional enzyme for formaldehyde fixation via the ribulose monophosphate pathway

Pyrococcus horikoshii OT3, a hyperthermophilic and anaerobic archaeon, was found to have an open reading frame (PH1938) whose deduced amino acid sequence of the N-terminal and C-terminal halves showed significant similarity to two key enzymes of the ribulose monophosphate pathway for formaldehyde fixation in methylotrophic bacteria, 3-hexulose-6-phosphate synthase (HPS) and 6-phospho-3-hexuloisomerase (PHI), respectively. The organism constitutively produced the encoded protein and exhibited activity of the sequential HPS- and PHI-mediated reactions in a particulate fraction. The full-length gene encoding the hybrid enzyme, the sequence corresponding to the HPS region, and the sequence corresponding to the PHI region were expressed in Escherichia coli and were found to produce active enzymes, rHps-Phi, rHps, or rPhi, respectively. Purified rHps-Phi and rHps were found to be active at the growth temperatures of the parent strain, but purified rPhi exhibited significant susceptibility to heat, suggesting that thermostability of the PHI moiety of the bifunctional enzyme (rHps-Phi) resulted from fusion with HPS. The bifunctional enzyme catalyzed the sequential reaction much more efficiently than a mixture of rHps and rPhi. These and other biochemical characterizations of the PH1938 gene product suggest that the ribulose monophosphate pathway plays a significant role in the archaeon under extreme environmental conditions.

Purification and characterization of the tungsten enzyme aldehyde:ferredoxin oxidoreductase from the hyperthermophilic denitrifier Pyrobaculum aerophilum

A tungsten-containing aldehyde:ferredoxin oxidoreductase (AOR) has been purified to homogeneity from Pyrobaculum aerophilum. The N-terminal sequence of the isolated enzyme matches a single open reading frame in the genome. Metal analysis and electron paramagnetic resonance (EPR) spectroscopy indicate that the P. aerophilum AOR contains one tungsten center and one [4Fe-4S](2+/1+) cluster per 68-kDa monomer. Native AOR is a homodimer. EPR spectroscopy of the purified enzyme that has been reduced with the substrate crotonaldehyde revealed a W(V) species with g(zyx) values of 1.952, 1.918, 1.872. The substrate-reduced AOR also contains a [4Fe-4S](1+) cluster with S=3/2 and zero field splitting parameters D=7.5 cm(-1) and E/D=0.22. Molybdenum was absent from the enzyme preparation. The P. aerophilum AOR lacks the amino acid sequence motif indicative for binding of mononuclear iron that is typically found in other AORs. Furthermore, the P. aerophilum AOR utilizes a 7Fe ferredoxin as the putative physiological redox partner, instead of a 4Fe ferredoxin as in Pyrococcus furiosus. This 7Fe ferredoxin has been purified from P. aerophilum, and the amino acid sequence has been identified using mass spectrometry. Direct electrochemistry of the ferredoxin showed two one-electron transitions, at -306 and -445 mV. In the presence of 55 microM ferredoxin the AOR activity is 17% of the activity obtained with 1 mM benzyl viologen as an electron acceptor.

Temperature dependent electrochemical investigations of molybdenum and tungsten oxobisdithiolene complexes

To achieve a better understanding why thermophilic and hyperthermophilic organisms use tungsten instead of molybdenum within the active sites of their molybdopterin dependent oxidases, electrochemical investigations of model complexes for the active sites of enzymes belonging to the DMSO reductase (molybdenum) and the aldehyde oxidoreductase (tungsten) family have been undertaken. Cyclic voltammetry and differential pulse voltammetry of four pairs of molybdenum and tungsten oxobisdithiolene compounds show huge differences in the response of their redox potentials to rising or decreasing temperatures, depending on the substituents at the dithiolene group. The mnt2- compounds (1a, 1b) respond with decreasing redox potentials E(1/2) to rising temperatures whereas all other compounds show positive gradients deltaE/deltaT. In every case the values for the gradients for the tungsten compounds are greater than those for the molybdenum compounds. Six of the investigated compounds are known in the literature and two compounds were newly synthesized. These two new compounds include the pyrane subunit of the native molybdopterin ligand and should therefore be even better models for the active site of the molybdopterin containing enzymes. The molybdenum/tungsten pair with these new ligands shows a remarkably small difference for the redox potentials of the transition M(IV) <--> M(V) of only 30 mV at 25 degrees C and the reversion of the usual order with higher potentials for the molybdenum than the tungsten compound at a temperature of 70 degrees C; a temperature that is in the range where usually tungsten containing enzymes instead of molybdenum containing ones are found.

Tungsten-containing aldehyde oxidoreductase of Eubacterium acidaminophilum

Aldehyde oxidoreductase of Eubacterium acidaminophilum was purified to homogeneity under strict anaerobic conditions using a four-step procedure. The purified enzyme was present as a monomer with an apparent molecular mass of 67 kDa and contained 6.0 +/- 0.1 iron, 1.1 +/- 0.2 tungsten, about 0.6 mol pterin cofactor and zinc, but no molybdenum. The enzyme activity was induced if a molar excess of electron donors, such as serine and/or formate, were supplied in the growth medium compared to readily available electron acceptors such as glycine betaine. Many aldehydes served as good substrates, thus enzyme activity obtained with acetaldehyde, propionaldehyde, butyraldehyde, isovaleraldehyde and benzaldehyde differed by a factor of less than two. Kinetic parameters were determined for all substrates tested. Oligonucleotides deduced from the N-terminal amino acid sequence were used to isolate the encoding aorA gene and adjacent DNA regions. The deduced amino acid sequence of the aldehyde oxidoreductase exhibited high similarities to other tungsten-containing aldehyde oxidoreductases from archaea. Transcription of the aorA gene was monocistronic and started from a sigma 54-dependent promoter. Upstream of aorA, the gene aorR is localized whose product is similar to sigma 54-dependent transcriptional activator proteins and, thus, AorR is probably involved in the regulation of aorA expression.

An analysis of the proteomic profile forThermoanaerobacter tengcongensisunder optimal culture conditions

The genome of Thermoanaerobacter tengcongensis is estimated to encode 2588 theoretical proteins. In this study, we have vitalized approximately 46% of the theoretical proteome experimentally using a proteomic strategy that combines three different methods, shotgun digestion plus high-performance liquid chromatography (HPLC) with ion-trap tandem mass spectrometry (shotgun-liquid chromatography (LC)/MS), one-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) plus HPLC with ion-trap tandem mass spectrometry (one-dimensional electrophoresis (1DE)-LC/MS), and two-dimensional gel electrophoresis plus matrix-assisted laser desorption/ionization-time of flight-mass spectrometry (2DE-MALDI-TOF-MS). Of the 1200 proteins identified, as few as 76 proteins were globally found by all three approaches, and notably, most of these proteins were in the soluble fraction. However, there were a number of unique proteins detected by one method only, suggesting that our strategy provides a means toward obtaining a comprehensive view of protein expression profile. Proteins from the major metabolic pathways are strongly represented on the map, and a number of these enzymes were identified by more than one proteomic method. Based upon the proteins identified in the present study, we are able to broaden the understanding of how T. tengcongensis survives under high temperature environment, whereas several of its properties can not be fully explained by genome data.

Molecular and biochemical characterization of two tungsten- and selenium-containing formate dehydrogenases from Eubacterium acidaminophilum that are associated with components of an iron-only hydrogenase

Two gene clusters encoding similar formate dehydrogenases (FDH) were identified in Eubacterium acidaminophilum. Each cluster is composed of one gene coding for a catalytic subunit ( fdhA-I, fdhA-II) and one for an electron-transferring subunit ( fdhB-I, fdhB-II). Both fdhA genes contain a TGA codon for selenocysteine incorporation and the encoded proteins harbor five putative iron-sulfur clusters in their N-terminal region. Both FdhB subunits resemble the N-terminal region of FdhA on the amino acid level and contain five putative iron-sulfur clusters. Four genes thought to encode the subunits of an iron-only hydrogenase are located upstream of the FDH gene cluster I. By sequence comparison, HymA and HymB are predicted to contain one and four iron-sulfur clusters, respectively, the latter protein also binding sites for FMN and NAD(P). Thus, HymA and HymB seem to represent electron-transferring subunits, and HymC the putative catalytic subunit containing motifs for four iron-sulfur clusters and one H-cluster specific for Fe-only hydrogenases. HymD has six predicted transmembrane helices and might be an integral membrane protein. Viologen-dependent FDH activity was purified from serine-grown cells of E. acidaminophilum and the purified protein complex contained four subunits, FdhA and FdhB, encoded by FDH gene cluster II, and HymA and HymB, identified after determination of their N-terminal sequences. Thus, this complex might represent the most simple type of a formate hydrogen lyase. The purified formate dehydrogenase fraction contained iron, tungsten, a pterin cofactor, and zinc, but no molybdenum. FDH-II had a two-fold higher K(m) for formate (0.37 mM) than FDH-I and also catalyzed CO(2) reduction to formate. Reverse transcription (RT)-PCR pointed to increased expression of FDH-II in serine-grown cells, supporting the isolation of this FDH isoform. The fdhA-I gene was expressed as inactive protein in Escherichia coli. The in-frame UGA codon for selenocysteine incorporation was read in the heterologous system only as stop codon, although its potential SECIS element exhibited a quite high similarity to that of E. coli FDH.

Characterization of a fourth tungsten-containing enzyme from the hyperthermophilic archaeon Pyrococcus furiosus

Pyrococcus furiosus grows optimally near 100 degrees C using peptides and carbohydrates as carbon sources, and it reduces elemental sulfur (S(0)), if present, to H(2)S. Tungsten (W), an element rarely used in biology, is required for optimal growth, and three different tungsten-containing enzymes have been previously purified from this organism. They all oxidize aldehydes of various types and are thought to play primary roles in the catabolism of sugars or amino acids. Here, the purification of a fourth tungsten-containing enzyme, termed WOR 4, from cell extracts of P. furiosus grown with S(0) is described. This was achieved by monitoring through multiple chromatography steps the W that is not associated with the three characterized tungstoenzymes. The N-terminal sequence of WOR 4 and the approximate molecular weight of its subunit determined electrophoretically (69,000) correspond to the product of an ORF (PF1961, wor4) present in the complete genome sequence of P. furiosus. WOR 4 is a homodimer and contains approximately one W, three Fe, three or four acid-labile sulfide, and one Ca atom per subunit. The visible and electron paramagnetic resonance spectra of the oxidized and reduced enzyme indicate the presence of an unusual iron-sulfur chromophore. WOR 4 does not oxidize aliphatic or aromatic aldehydes or hydroxy acids, nor does it reduce keto acids. Consistent with prior microarray data, the protein could not be purified from P. furiosus cells grown in the absence of S(0), suggesting that it may have a role in S(0) metabolism.

Pyrococcus furiosus ferredoxin is a functional dimer

Pyrococcus furiosus ferredoxin is subject to a monomer/dimer equilibrium as a function of ionic strength. At physiological ionic strength, approximately 0.35 M NaCl, the protein is very predominantly homodimer. The monomeric form exhibits impaired electron transfer on glassy carbon; it also has a decreased S=3/2 over S=1/2 ratio as shown by electron paramagnetic resonance spectroscopy. Even following sterilization at 121 degrees C the dimer is stable in denaturing gel electrophoresis.

Molybdenum and tungsten in biology

Molybdenum is the only second-row transition metal that is required by most living organisms, and the few species that do not require molybdenum use tungsten, which lies immediately below molybdenum in the periodic table. Because of their unique chemical versatility and unusually high bioavailability these two transition metals have been incorporated into the active sites of enzymes over the course of evolution. Enzymes that contain molybdenum or tungsten continue to be discovered and several crystal structures have become available recently. This new structural information has been complemented by spectroscopic and kinetic methods, as well as computational approaches. Together, these studies provide an increasingly detailed view of the reaction mechanisms and the correlation between the electronic structure of the active site and catalytic function, one of the fundamental goals in metallobiochemistry.

Atomic resolution structures of oxidized [4Fe-4S] ferredoxin from Bacillus thermoproteolyticus in two crystal forms: systematic distortion of [4Fe-4S] cluster in the protein

Diffraction data of two crystal forms (forms I and II) of [4Fe-4S] ferredoxin from Bacillus thermoproteolyticus have been collected to 0.92 A and 1.00 A resolutions, respectively, at 100 K using synchrotron radiation. Anisotropic temperature factors were introduced for all non-hydrogen atoms in the refinement with SHELX-97, in which stereochemical restraints were applied to the protein chain but not to the [4Fe-4S] cluster. The final crystallographic R-factors are 9.8 % for 7.0-0.92 A resolution data of the form I and 11.2 % for the 13.3-1.0 A resolution data of the form II. Many hydrogen atoms as well as multiple conformations for several side-chains have been identified. The present refinement has revised the conformations of several peptide bonds and side-chains assigned previously at 2.3 A resolution; the largest correction was that the main-chain of Pro1 and the side-chain of Lys2 were changed by rotating the C(alpha)-C bond of Lys2. Although the overall structures in the two crystal forms are very similar, conformational differences are observed in the two residues at the middle (Glu29 and Asp30) and the C-terminal residues, which have large temperature factors. The [4Fe-4S] cluster is a distorted cube with non-planar rhombic faces. Slight but significant compression of the four Fe-S bonds along one direction is observed in both crystal forms, and results in the D(2d) symmetry of the cluster. The compressed direction of the cluster relative to the protein is conserved in the two crystal forms and consistent with that in one of the clusters in Clostridium acidurici ferredoxin.

Characterization of the iron-sulfur cluster coordinated by a cysteine cluster motif (CXXCXXXCX27C) in the Nqo3 subunit in the proton-translocating NADH-quinone oxidoreductase (NDH-1) of Thermus thermophilus HB-8

The proton-translocating NADH-quinone oxidoreductase (NDH-1) of Thermus thermophilus HB-8 is composed of 14 subunits (designated Nqo1-14). This NDH-1 houses nine putative iron-sulfur binding sites, eight of which are generally found in bacterial NDH-1 and its mitochondrial counterpart (complex I). The extra site contains a CXXCXXXCX(27)C motif and is located in the Nqo3 subunit. This motif was originally found in Escherichia coli NDH-1 and was assigned to a binuclear cluster (g(z, y, x) = 2.00, 1.95, 1.92) and named N1c. In this report, the Thermus Nqo3 fragment containing this motif was heterologously overexpressed, using a glutathione S-transferase fusion system. This fragment contained a small amount of iron-sulfur cluster, whose content was significantly increased by in vitro reconstitution. The UV-visible and EPR spectroscopic properties of this fragment indicate that the ligated iron-sulfur cluster is tetranuclear with nearly axial symmetry (g( parallel, perpendicular) = 2.045, approximately 1.94). Site-directed mutants show that all four cysteines participate in the ligation of a [4Fe-4S] cluster. Considering the fact that the same motif coordinates only tetranuclear clusters in other enzymes so far known, we propose that the CXXCXXXCX(27)C motif in the Nqo3 subunit most likely ligates the [4Fe-4S] cluster.

Tungstate Uptake by a highly specific ABC transporter in Eubacterium acidaminophilum

The Gram-positive anaerobe Eubacterium acidaminophilum contains at least two tungsten-dependent enzymes: viologen-dependent formate dehydrogenase and aldehyde dehydrogenase. (185)W-Labeled tungstate was taken up by this organism with a maximum rate of 0.53 pmol min(-)1 mg(-)1 of protein at 36 degrees C. The uptake was not affected by equimolar amounts of molybdate. The genes tupABC coding for an ABC transporter specific for tungstate were cloned in the downstream region of genes encoding a tungsten-containing formate dehydrogenase. The substrate-binding protein, TupA, of this putative transporter was overexpressed in Escherichia coli, and its binding properties toward oxyanions were determined by a native polyacrylamide gel retardation assay. Only tungstate induced a shift of TupA mobility, suggesting that only this anion was specifically bound by TupA. If molybdate and sulfate were added in high molar excess (>1000-fold), they were also slightly bound by TupA. The K(d) value for tungstate was determined to be 0.5 microm. The genes encoding the tungstate-specific ABC transporter exhibited highest similarities to putative transporters from Methanobacterium thermoautotrophicum, Haloferax volcanii, Vibrio cholerae, and Campylobacter jejuni. These five transporters represent a separate phylogenetic group of oxyanion ABC transporters as evident from analysis of the deduced amino acid sequences of the binding proteins. Downstream of the tupABC genes, the genes moeA, moeA-1, moaA, and a truncated moaC have been identified by sequence comparison of the deduced amino acid sequences. They should participate in the biosynthesis of the pterin cofactor that is present in molybdenum- and tungsten-containing enzymes except nitrogenase.

NADH dehydrogenases: from basic science to biomedicine

This review article is concerned with two on-going research projects in our laboratory, both of which are related to the study of the NADH dehydrogenase enzyme complexes in the respiratory chain. The goal of the first project is to decipher the structure and mechanism of action of the proton-translocating NADH-quinone oxidoreductase (NDH-1) from two bacteria, Paracoccus denitrificans and Thermus thermophilus HB-8. These microorganisms are of particular interest because of the close resemblance of the former (P. denitrificans) to a mammalian mitochondria, and because of the thermostability of the enzymes of the latter (T. thermophilus). The NDH-1 enzyme complex of these and other bacteria is composed of 13 to 14 unlike subunits and has a relatively simple structure relative to the mitochondrial proton-translocating NADH-quinone oxidoreductase (complex I), which is composed of at least 42 different subunits. Therefore, the bacterial NDH-I is believed to be a useful model for studying the mitochondrial complex I, which is understood to have the most intricate structure of all the membrane-associated enzyme complexes. Recently, the study of the NADH dehydrogenase complex has taken on new urgency as a result of reports that complex I defects are involved in many human mitochondrial diseases. Thus the goal of the second project is to develop possible gene therapies for mitochondrial diseases caused by complex I defects. This project involves attempting to repair complex I defects in the mammalian system using Saccharomyces cerevisiae NDI1 genes, which code for the internal, rotenone-insensitive NADH-quinone oxidoreductase. In this review, we will discuss our progress and the data generated by these two projects to date. In addition, background information and the significance of various approaches employed to pursue these research objectives will be described.

The crystal structure of the Escherichia coli MobA protein provides insight into molybdopterin guanine dinucleotide biosynthesis

The molybdenum cofactor (Moco) is found in a variety of enzymes present in all phyla and comprises a family of related molecules containing molybdopterin (MPT), a tricyclic pyranopterin with a cis-dithiolene group, as the invariant essential moiety. MPT biosynthesis involves a conserved pathway, but some organisms perform additional reactions that modify MPT. In eubacteria, the cofactor is often present in a dinucleotide form combining MPT and a purine or pyrimidine nucleotide via a pyrophosphate linkage. In Escherichia coli, the MobA protein links a guanosine 5'-phosphate to MPT forming molybdopterin guanine dinucleotide. This reaction requires GTP, MgCl(2), and the MPT form of the cofactor and can efficiently reconstitute Rhodobacter sphaeroides apo-DMSOR, an enzyme that requires molybdopterin guanine dinucleotide for activity. In this paper, we present the crystal structure of MobA, a protein containing 194 amino acids. The MobA monomer has an alpha/beta architecture in which the N-terminal half of the molecule adopts a Rossman fold. The structure of MobA has striking similarity to Bacillus subtilis SpsA, a nucleotide-diphospho-sugar transferase involved in sporulation. The cocrystal structure of MobA and GTP reveals that the GTP-binding site is located in the N-terminal half of the molecule. Conserved residues located primarily in three signature sequence motifs form crucial interactions with the bound nucleotide. The binding site for MPT is located adjacent to the GTP-binding site in the C-terminal half of the molecule, which contains another set of conserved residues presumably involved in MPT binding.

X-ray spectroscopy of enzyme active site analogues and related molecules: bis(dithiolene)molybdenum(IV) and -tungsten(IV,VI) complexes with variant terminal ligands

The X-ray absorption spectra at the molybdenum and selenium K-edges and the tungsten L2,3-edges are acquired for a set of 14 Mo(IV) and W(IV,VI) bis(dithiolene) complexes related to the active sites of molybdo- and tungstoenzymes. The set includes square pyramidal [MoIVL(S2C2Me2)2]- (L = O2-, R3SiO-, RO-, RS-, RSe-) and [WIV(OR)(S2C2Me2)2]-, distorted trigonal prismatic [MoIV(CO)(SeR)(S2C2Me2)2]- and [WIV(CO)L(S2C2Me2)2]- (L = RS-, RSe-), and distorted octahedral [WVIO(OR)(S2C2Me2)2]-. The dithiolene simulates the pterin-dithiolene cofactor ligand, and L represents a protein ligand. Bond lengths are determined by EXAFS analysis using the GNXAS protocol. Normalized edge spectra, non-phase-shift-corrected Fourier transforms, and EXAFS data and fits are presented. Bond lengths determined by EXAFS and X-ray crystallography agree to < or = 0.02 A as do the M-Se distances determined by both metal and selenium EXAFS. The complexes [MoIV(QR)(S2C2Me2)2]- simulate protein ligation by the DMSO reductase family of enzymes, including DMSO reductase itself (Q = O), dissimilatory nitrate reductase (Q = S), and formate dehydrogenase (Q = Se). Edge shifts of these complexes correlate with the ligand electronegativities. Terminal ligand binding is clearly distinguished in the presence of four Mo-S(dithiolene) interactions. Similarly, five-coordinate [ML(S2C2Me2)2]- and six-coordinate [M(CO)L(S2C2Me2)2]- are distinguishable by edge and EXAFS spectra. This study expands a previous XAS investigation of bis(dithiolene)metal(IV,V,VI) complexes (Musgrave, K. B.; Donahue, J. P.; Lorber, C.; Holm, R. H.; Hedman, B.; Hodgson, K. O. J. Am. Chem. Soc. 1999, 121, 10297) by including a larger inventory of molecules with variant physiologically relevant terminal ligation. The previous and present XAS results should prove useful in characterizing and refining metric features and structures of enzyme sites.

Structural model of the Fe-hydrogenase/cytochrome c553 complex combining transverse relaxation-optimized spectroscopy experiments and soft docking calculations

Fe-hydrogenase is a 54-kDa iron-sulfur enzyme essential for hydrogen cycling in sulfate-reducing bacteria. The x-ray structure of Desulfovibrio desulfuricans Fe-hydrogenase has recently been solved, but structural information on the recognition of its redox partners is essential to understand the structure-function relationships of the enzyme. In the present work, we have obtained a structural model of the complex of Fe-hydrogenase with its redox partner, the cytochrome c(553), combining docking calculations and NMR experiments. The putative models of the complex demonstrate that the small subunit of the hydrogenase has an important role in the complex formation with the redox partner; 50% of the interacting site on the hydrogenase involves the small subunit. The closest contact between the redox centers is observed between Cys-38, a ligand of the distal cluster of the hydrogenase and Cys-10, a ligand of the heme in the cytochrome. The electron pathway from the distal cluster of the Fe-hydrogenase to the heme of cytochrome c(553) was investigated using the software Greenpath and indicates that the observed cysteine/cysteine contact has an essential role. The spatial arrangement of the residues on the interface of the complex is very similar to that already described in the ferredoxin-cytochrome c(553) complex, which therefore, is a very good model for the interacting domain of the Fe-hydrogenase-cytochrome c(553).

Spectroscopic studies of the tungsten-containing formaldehyde ferredoxin oxidoreductase from the hyperthermophilic archaeon Thermococcus litoralis

The electronic and redox properties of the iron-sulfur cluster and tungsten center in the as-isolated and sulfide-activated forms of formaldehyde ferredoxin oxidoreductase (FOR) from Thermococcus litoralis (Tl) have been investigated by using the combination of EPR and variable-temperature magnetic circular dichroism (VTMCD) spectroscopies. The results reveal a [Fe4S4]2+,+ cluster (Em=-368mV) that undergoes redox cycling between an oxidized form with an S=0 ground state and a reduced form that exists as a pH- and medium-dependent mixture of S=3/2 (g=5.4; E/D=0.33) and S=1/2 (g=2.03, 1.93, 1.86) ground states, with the former dominating in the presence of 50% (v/v) glycerol. Three distinct types of W(V) EPR signals have been observed during dye-mediated redox titration of as-isolated Tl FOR. The initial resonance observed upon oxidation, termed the "low-potential" W(V) species (g=1.977, 1.898, 1.843), corresponds to approximately 25-30% of the total W and undergoes redox cycling between W(IV)/ W(V) and W(V)/W(VI) states at physiologically relevant potentials (Em= -335 and -280 mV, respectively). At higher potentials a minor "mid-potential" W(V) species, g= 1.983, 1.956, 1.932, accounting for less than 5 % of the total W, appears with a midpoint potential of -34 mV and persists up to at least + 300 mV. At potentials above 0 mV, a major "high-potential" W(V) signal, g= 1.981, 1.956, 1.883, accounting for 30-40% of the total W, appears at a midpoint potential of +184 mV. As-isolated samples of Tl FOR were found to undergo an approximately 8-fold enhancement in activity on incubation with excess Na2S under reducing conditions and the sulfide-activated Tl FOR was partially inactivated by cyanide. The spectroscopic and redox properties of the sulfide-activated Tl FOR are quite distinct from those of the as-isolated enzyme, with loss of the low-potential species and changes in both the mid-potential W(V) species (g= 1.981, 1.950, 1.931; Em = -265 mV) and high-potential W(V) species (g=1.981, 1.952, 1.895; Em = +65 mV). Taken together, the W(V) species in sulfide-activated samples of Tl FOR maximally account for only 15% of the total W. Both types of high-potential W(V) species were lost upon incubation with cyanide and the sulfide-activated high-potential species is converted into the as-isolated high-potential species upon exposure to air. Structural models are proposed for each of the observed W(V) species and both types of mid-potential and high-potential species are proposed to be artifacts of ligand-based oxidation of W(VI) species. A W(VI) species with terminal sulfido or thiol ligands is proposed to be responsible for the catalytic activity in sulfide-activated samples of Tl FOR.

Synthesis and reactivity studies of model complexes for molybdopterin-dependent enzymes

The molybdenum cofactor (Moco)-containing enzymes are divided into three classes that are named after prototypical members of each family, viz. sulfite oxidase, DMSO reductase and xanthine oxidase. Functional or structural models have been prepared for these three prototypical enzymes: (i) The complex [MoO2(mnt)2]2- (mnt2- = 1,2-dicyanoethylenedithiolate) has been found to be able to oxidize hydrogen sulfite to HSO4- and is thus a functional model of sulfite oxidase. Kinetic and computational studies indicate that the reaction proceeds via attack of the substrate at one of the oxo ligands of the complex, rather than at the metal. (ii) The coordination geometries of the mono-oxo [Mo(VI)(O-Ser)(S2)2] entity (S2 = dithiolene moiety of molybdopterin) found in the crystal structure of R. sphaeroides DMSO reductase and the corresponding des-oxo Mo(IV) unit have been reproduced in the complexes [M(VI)O(OSiR3)(bdt)2] and [M(VI)O(OSiR3)(bdt)2] (M = Mo,W; bdt = benzene dithiolate). (iii) A facile route has been developed for the preparation of complexes containing a cis-Mo(VI)OS molybdenum oxo, sulfido moiety similar to that detected in the oxidized form of xanthine oxidase.

Electron transfer properties of iron-sulfur proteins

The details of most electron transfer reactions involving iron-sulfur proteins have remained undisclosed because of the lack of experimental methods suitable to measure precisely the relevant rates. Nuclear magnetic resonance (NMR) provides a powerful means to overcome these problems, at least with selected proteins. A combination of NMR studies and site-directed mutagenesis experiments has been instrumental in defining both the site of interaction and the main trends of the intracomplex electron transfer in the case of rubredoxin electron self-exchange. Analysis of the NMR data obtained for mixtures of different redox levels of several 2[4Fe-4S] ferredoxins provided both first-order, for intramolecular, and second-order, for intermolecular, rate constants. Their dependence as a function of structural changes gave insight into the mechanism of electron transfer in this type of protein. Contrary to some expectations, the high-spin [4Fe-4Se]+ clusters assembled in isopotential ferredoxins do not change the intramolecular electron transfer rate as compared to low-spin [4Fe-4S]+ homologs. In combination with activity measurements, the kinetic data have been used to model the electron transfer competent complexes between Clostridium pasteurianum ferredoxin and the main enzymes acting as redox partners in vivo.

Synthesis and structures of bis(dithiolene)-tungsten(IV) complexes related to the active sites of tungstoenzymes

Recent protein crystallographic results on tungsten enzymes and primary sequence relationships between certain molybdenum and tungsten enzymes provoke interest in the generalized bis(dithiolene) complexes [WIV(QR)(S2C2R'2)2]1- and [WVIO(QR)(S2C2R'2)2]1- (Q = O, S, Se) as minimal representations of enzyme sites. The existence and stability of W(IV) complexes have been explored by synthesis. Reaction of [W(CO)2(S2C2Me2)2] (1) with PhO- results in complete CO substitution to give [W(OPh)(S2C2Me2)2]1- (2). Reaction of 1 with PhQ- affords the monocarbonyls [W(CO)(QPh)(S2C2Me2)2]1- (Q = S (3), Se (5)). The use of sterically demanding 2,4,6-Pri3C6H2Q- also yields monocarbonyls, [W(CO)(QC6H2-2,4,6-Pri3)(S2C2Me2)2]1- (Q = S (4), Se (6)). The X-ray structures of square pyramidal 2 and trigonal prismatic 3-6 (with unidentate ligands cis) are described. The tendency to substitute one or both carbonyl ligands in 1 in the formation of [MIV(QAr)(S2C2Me2)2]1- and [MIV(CO)(QAr)(SeC2Me2)2]1- with M = Mo and W is related to the M-Q bond length and ligand steric demands. The results demonstrate a stronger binding of CO by W(IV) than Mo(IV), a behavior previously demonstrated by thermodynamic and kinetic features of zerovalent carbonyl complexes. Complexes 3-6 can be reversibly reduced to W(III) at approximately -1.5 V versus SCE. On the basis of the potential for 2(-2.07 V), monocarbonyl ligation stabilizes W(III) by approximately 500 mV. This work is part of a parallel investigation of the chemistry of bis(dithiolene)-molybdenum (Lim, B. S.; Donahue, J. P.; Holm, R. H. Inorg. Chem. 2000, 39, 263) and -tungsten complexes related to enzyme active sites.

Structure and electron transfer mechanism of pyruvate:ferredoxin oxidoreductase

The first crystal structure of pyruvate:ferredoxin oxidoreductase to be determined has provided significant new information on its structural organization and redox chemistry. Spectroscopic analyses of a radical reaction intermediate have shed more light on its thiamin-based mechanism of catalysis. Different approaches have been used to study the interaction between the enzyme and ferredoxin, its redox partner.

Pyrococcus furiosus glyceraldehyde 3-phosphate oxidoreductase has comparable W(6+/5+) and W(5+/4+) reduction potentials and unusual [4Fe-4S] EPR properties

Pyrococcus furiosus glyceraldehyde 3-phosphate oxidoreductase has been characterized using EPR-monitored redox titrations. Two different W signals were found. W(1)(5+) is an intermediate species in the catalytic cycle, with the midpoint potentials E(m)(W(6+/5+))=-507 mV and E(m)(W(5+/4+))=-491 mV. W(2)(5+) represents an inactivated species with E(m)(W(6+/5+))=-329 mV. The cubane cluster exhibits both S=3/2 and S=1/2 signals with the same midpoint potential: E(m)([4Fe-4S](2+/1+))=-335 mV. The S=1/2 EPR signal is unusual with all g values below 2.0. The titration results combined with catalytic voltammetry data are consistent with electron transfer from glyceraldehyde 3-phosphate first to the tungsten center, then to the cubane cluster and finally to the ferredoxin.

Structural and kinetic studies of the pyruvate-ferredoxin oxidoreductase/ferredoxin complex from Desulfovibrio africanus

The pyruvate-ferredoxin oxidoreductase (PFOR)/ferredoxin (Fd) system of Desulfovibrio africanus has been investigated with the aim of understanding more fully protein-protein interaction and the kinetic characteristics of electron transfer between the two redox partners. D. africanus contains three Fds (Fd I, Fd II and Fd III) able to function as electron acceptors for PFOR. The complete amino acid sequence of Fd II was determined by automatic Edman degradation. It revealed a striking similarity to that of Fd I. The protein consists of 64 residues and its amino acid sequence is in agreement with a molecular mass of 6822.5 Da as measured by electrospray MS. Fd II contains five cysteine residues of which the first four (Cys11, Cys14, Cys17 and Cys54) are likely ligands for the single [4Fe-4S] cluster. A covalently cross-linked complex between PFOR and Fd I or Fd II was obtained by using a water soluble carbodiimide. This complex exhibited a stoichiometry of one ferredoxin for one PFOR subunit and is dependent on the ionic strength. The second-order rate constants for electron transfer between PFOR and Fds determined electrochemically using cyclic voltammetry are 7 x 107 M-1.s-1 for Fd I and 2 x 107 M-1.s-1 for Fd II and Fd III. The Km values of PFOR for Fd I and Fd II measured both by the electrochemical and the spectrophotometric method have been found to be 3 microM and 5 microM, respectively. The three-dimensional modelling of Fd II and surface analysis of Fd I, Fd II and PFOR suggest that a protein-protein complex is likely to be formed between aspartic acid/glutamic acid invariant residues of Fds and lysine residues surrounding the distal [4Fe-4S] cluster of PFOR. All of these studies are indicative of the involvement of electrostatic interactions between the two redox partners.