Cryoelectron-microscopy image reconstruction of symmetry mismatches in bacteriophage phi29

A hypothesis for bacteriophage DNA packaging motors

The hypothesis is presented that bacteriophage DNA packaging motors have a cycle comprised of bind/release thermal ratcheting with release-associated DNA pushing via ATP-dependent protein folding. The proposed protein folding occurs in crystallographically observed peptide segments that project into an axial channel of a protein 12-mer (connector) that serves, together with a coaxial ATPase multimer, as the entry portal. The proposed cycle begins when reverse thermal motion causes the connector’s peptide segments to signal the ATPase multimer to bind both ATP and the DNA molecule, thereby producing a dwell phase recently demonstrated by single-molecule procedures. The connector-associated peptide segments activate by transfer of energy from ATP during the dwell. The proposed function of connector/ATPase symmetry mismatches is to reduce thermal noise-induced signaling errors. After a dwell, ATP is cleaved and the DNA molecule released. The activated peptide segments push the released DNA molecule, thereby producing a burst phase recently shown to consist of four mini-bursts. The constraint of four mini-bursts is met by proposing that each mini-burst occurs via pushing by three of the 12 subunits of the connector. If all four mini-bursts occur, the cycle repeats. If the mini-bursts are not completed, a second cycle is superimposed on the first cycle. The existence of the second cycle is based on data recently obtained with bacteriophage T3. When both cycles stall, energy is diverted to expose the DNA molecule to maturation cleavage.

Nuclear magnetic resonance structure of the prohead RNA E-loop hairpin

The Bacillus subtilis phage phi29 packaging motor requires prohead RNA for genome encapsidation. The nuclear magnetic resonance structure of the prohead RNA E-loop hairpin, r(5'AUUGAGUU), is presented and compared to predictions from MC-SYM. The prohead RNA E-loop hairpins contain sequences similar to rRNA hairpins. Comparison of predicted and experimentally determined prohead and ribosomal hairpin structures reveals that sequence similarity is a stronger determinant of hairpin structural similarity than grouping similar types of RNA. All the hairpins contain a U-turn motif but differ in the first noncanonical pair and backbone orientation. These structures provide benchmarks for further improvements in RNA structure predictions from sequence.

Intersubunit coordination in a homomeric ring ATPase

Homomeric ring ATPases perform many vital and varied tasks in the cell, ranging from chromosome segregation to protein degradation. Here we report the direct observation of the intersubunit coordination and step size of such a ring ATPase, the double-stranded-DNA packaging motor in the bacteriophage phi29. Using high-resolution optical tweezers, we find that packaging occurs in increments of 10 base pairs (bp). Statistical analysis of the preceding dwell times reveals that multiple ATPs bind during each dwell, and application of high force reveals that these 10-bp increments are composed of four 2.5-bp steps. These results indicate that the hydrolysis cycles of the individual subunits are highly coordinated by means of a mechanism novel for ring ATPases. Furthermore, a step size that is a non-integer number of base pairs demands new models for motor-DNA interactions.

Novel mechanism of hexamer ring assembly in protein/RNA interactions revealed by single molecule imaging

Many nucleic acid-binding proteins and the AAA+ family form hexameric rings, but the mechanism of hexamer assembly is unclear. It is generally believed that the specificity in protein/RNA interaction relies on molecular contact through a surface charge or 3D structure matching via conformational capture or induced fit. The pRNA of bacteriophage phi29 DNA-packaging motor also forms a ring, but whether the pRNA ring is a hexamer or a pentamer is under debate. Here, single molecule studies elucidated a mechanism suggesting the specificity and affinity in protein/RNA interaction relies on pRNA static ring formation. A combined pRNA ring-forming group was very specific for motor binding, but the isolated individual members of the ring-forming group bind to the motor nonspecifically. pRNA did not form a ring prior to motor binding. Only those RNAs that formed a static ring, via the interlocking loops, stayed on the motor. Single interlocking loop interruption resulted in pRNA detachment. Extension or reduction of the ring circumference failed in motor binding. This new mechanism was tested by redesigning two artificial RNAs that formed hexamer and packaged DNA. The results confirmed the stoichiometry of pRNA on the motor was the common multiple of two and three, thus, a hexamer.

Defining molecular and domain boundaries in the bacteriophage phi29 DNA packaging motor

Cryo-electron microscopy (cryo-EM) studies of the bacteriophage phi29 DNA packaging motor have delineated the relative positions and molecular boundaries of the 12-fold symmetric head-tail connector, the 5-fold symmetric prohead RNA (pRNA), the ATPase that provides the energy for packaging, and the procapsid. Reconstructions, assuming 5-fold symmetry, were determined for proheads with 174-base, 120-base, and 71-base pRNA; proheads lacking pRNA; proheads with ATPase bound; and proheads in which the packaging motor was missing the connector. These structures are consistent with pRNA and ATPase forming a pentameric motor component around the unique vertex of proheads. They suggest an assembly pathway for the packaging motor and a mechanism for DNA translocation into empty proheads.

Packaging of a unit-length viral genome: the role of nucleotides and the gpD decoration protein in stable nucleocapsid assembly in bacteriophage lambda

The developmental pathways for a variety of eukaryotic and prokaryotic double-stranded DNA viruses include packaging of viral DNA into a preformed procapsid structure, catalyzed by terminase enzymes and fueled by ATP hydrolysis. In most instances, a capsid expansion process accompanies DNA packaging, which significantly increases the volume of the capsid to accommodate the full-length viral genome. "Decoration" proteins add to the surface of the expanded capsid lattice, and the terminase motors tightly package DNA, generating up to approximately 20 atm of internal capsid pressure. Herein we describe biochemical studies on genome packaging using bacteriophage lambda as a model system. Kinetic analysis suggests that the packaging motor possesses at least four ATPase catalytic sites that act cooperatively to effect DNA translocation, and that the motor is highly processive. While not required for DNA translocation into the capsid, the phage lambda capsid decoration protein gpD is essential for the packaging of the penultimate 8-10 kb (15-20%) of the viral genome; virtually no DNA is packaged in the absence of gpD when large DNA substrates are used, most likely due to a loss of capsid structural integrity. Finally, we show that ATP hydrolysis is required to retain the genome in a packaged state subsequent to condensation within the capsid. Presumably, the packaging motor continues to "idle" at the genome end and to maintain a positive pressure towards the packaged state. Surprisingly, ADP, guanosine triphosphate, and the nonhydrolyzable ATP analog 5'-adenylyl-beta,gamma-imidodiphosphate (AMP-PNP) similarly stabilize the packaged viral genome despite the fact that they fail to support genome packaging. In contrast, the poorly hydrolyzed ATP analog ATP-gammaS only partially stabilizes the nucleocapsid, and a DNA is released in "quantized" steps. We interpret the ensemble of data to indicate that (i) the viral procapsid possesses a degree of plasticity that is required to accommodate the packaging of large DNA substrates; (ii) the gpD decoration protein is required to stabilize the fully expanded capsid; and (iii) nucleotides regulate high-affinity DNA binding interactions that are required to maintain DNA in the packaged state.

Role of the CCA bulge of prohead RNA of bacteriophage ø29 in DNA packaging

The oligomeric ring of prohead RNA (pRNA) is an essential component of the ATP-driven DNA packaging motor of bacteriophage ø29. The A-helix of pRNA binds the DNA translocating ATPase gp16 (gene product 16) and the CCA bulge in this helix is essential for DNA packaging in vitro. Mutation of the bulge by base substitution or deletion showed that the size of the bulge, rather than its sequence, is primary in DNA packaging activity. Proheads reconstituted with CCA bulge mutant pRNAs bound the packaging ATPase gp16 and the packaging substrate DNA-gp3, although DNA translocation was not detected with several mutants. Prohead/bulge-mutant pRNA complexes with low packaging activity had a higher rate of ATP hydrolysis per base pair of DNA packaged than proheads with wild-type pRNA. Cryoelectron microscopy three-dimensional reconstruction of proheads reconstituted with a CCA deletion pRNA showed that the protruding pRNA spokes of the motor occupy a different position relative to the head when compared to particles with wild-type pRNA. Therefore, the CCA bulge seems to dictate the orientation of the pRNA spokes. The conformational changes observed for this mutant pRNA may affect gp16 conformation and/or subsequent ATPase-DNA interaction and, consequently, explain the decreased packaging activity observed for CCA mutants.

DNA poised for release in bacteriophage phi29

We present here the first asymmetric, three-dimensional reconstruction of a tailed dsDNA virus, the mature bacteriophage phi29, at subnanometer resolution. This structure reveals the rich detail of the asymmetric interactions and conformational dynamics of the phi29 protein and DNA components, and provides novel insight into the mechanics of virus assembly. For example, the dodecameric head-tail connector protein undergoes significant rearrangement upon assembly into the virion. Specific interactions occur between the tightly packed dsDNA and the proteins of the head and tail. Of particular interest and novelty, an approximately 60A diameter toroid of dsDNA was observed in the connector-lower collar cavity. The extreme deformation that occurs over a small stretch of DNA is likely a consequence of the high pressure of the packaged genome. This toroid structure may help retain the DNA inside the capsid prior to its injection into the bacterial host.

Biophysics of viral infectivity: matching genome length with capsid size

In this review, we discuss recent advances in biophysical virology, presenting experimental and theoretical studies on the physical properties of viruses. We focus on the double-stranded (ds) DNA bacteriophages as model systems for all of the dsDNA viruses both prokaryotic and eukaryotic. Recent studies demonstrate that the DNA packaged into a viral capsid is highly pressurized, which provides a force for the first step of passive injection of viral DNA into a bacterial cell. Moreover, specific studies on capsid strength show a strong correlation between genome length, and capsid size and robustness. The implications of these newly appreciated physical properties of a viral particle with respect to the infection process are discussed.

Crystal and cryoEM structural studies of a cell wall degrading enzyme in the bacteriophage phi29 tail

The small bacteriophage phi29 must penetrate the approximately 250-A thick external peptidoglycan cell wall and cell membrane of the Gram-positive Bacillus subtilis, before ejecting its dsDNA genome through its tail into the bacterial cytoplasm. The tail of bacteriophage phi29 is noncontractile and approximately 380 A long. A 1.8-A resolution crystal structure of gene product 13 (gp13) shows that this tail protein has spatially well separated N- and C-terminal domains, whose structures resemble lysozyme-like enzymes and metallo-endopeptidases, respectively. CryoEM reconstructions of the WT bacteriophage and mutant bacteriophages missing some or most of gp13 shows that this enzyme is located at the distal end of the phi29 tail knob. This finding suggests that gp13 functions as a tail-associated, peptidoglycan-degrading enzyme able to cleave both the polysaccharide backbone and peptide cross-links of the peptidoglycan cell wall. Comparisons of the gp13(-) mutants with the phi29 mature and emptied phage structures suggest the sequence of events that occur during the penetration of the tail through the peptidoglycan layer.

DNA packaging motor assembly intermediate of bacteriophage phi29

Unraveling the structure and assembly of the DNA packaging ATPases of the tailed double-stranded DNA bacteriophages is integral to understanding the mechanism of DNA translocation. Here, the bacteriophage phi29 packaging ATPase gene product 16 (gp16) was overexpressed in soluble form in Bacillus subtilis (pSAC), purified to near homogeneity, and assembled to the phi29 precursor capsid (prohead) to produce a packaging motor intermediate that was fully active in in vitro DNA packaging. The formation of higher oligomers of the gp16 from monomers was concentration dependent and was characterized by analytical ultracentrifugation, gel filtration, and electron microscopy. The binding of multiple copies of gp16 to the prohead was dependent on the presence of an oligomer of 174- or 120-base prohead RNA (pRNA) fixed to the head-tail connector at the unique portal vertex of the prohead. The use of mutant pRNAs demonstrated that gp16 bound specifically to the A-helix of pRNA, and ribonuclease footprinting of gp16 on pRNA showed that gp16 protected the CC residues of the CCA bulge (residues 18-20) of the A-helix. The binding of gp16 to the prohead/pRNA to constitute the complete and active packaging motor was confirmed by cryo-electron microscopy three-dimensional reconstruction of the prohead/pRNA/gp16 complex. The complex was capable of supercoiling DNA-gp3 as observed previously for gp16 alone; therefore, the binding of gp16 to the prohead, rather than first to DNA-gp3, represents an alternative packaging motor assembly pathway.

Post-imaging fiducial markers aid in the orientation determination of complexes with mixed or unknown symmetry

During the entry process many icosahedral viruses must adopt a lower-order symmetry or incur a symmetry mismatch to release their genome through a single site. A membrane model system in which poliovirus was bound to receptor-decorated liposomes was used to pioneer techniques that studied the break in the symmetry of the initial attachment complex by cryo-electron microscopy. Novel methods involving a fiducial marker for the membrane contact point were developed to objectively determine the symmetry of this complex and provide a starting model to initiate a bootstrap orientation refinement. Here we analyze how errors in the subjective assignment of this position affect the determination of symmetry, and the accuracy of calculating Euler angles for each raw image. In this study we have optimized the method and applied it to study the membrane-attachment complex of Semliki Forest virus (SFV), a model system for enveloped virus fusion. The resulting reconstruction of the SFV-membrane complex with a fiducial provides the first experimental evidence that this pre-fusion cell entry intermediate approaches the membrane along the viral 5-fold axis. The analysis reported here, and its subsequent application to enveloped virus fusion, indicate that this is a robust tool for solving the structures of mixed-symmetry complexes.

Insight into DNA and protein transport in double-stranded DNA viruses: the structure of bacteriophage N4

Bacteriophage N4 encapsidates a 3500-aa-long DNA-dependent RNA polymerase (vRNAP), which is injected into the host along with the N4 genome upon infection. The three-dimensional structures of wild-type and mutant N4 viruses lacking gp17, gp50, or gp65 were determined by cryoelectron microscopy. The virion has an icosahedral capsid with T=9 quasi-symmetry that encapsidates well-organized double-stranded DNA and vRNAP. The tail, attached at a unique pentameric vertex of the head, consists of a neck, 12 appendages, and six ribbons that constitute a non-contractile sheath around a central tail tube. Comparison of wild-type and mutant virus structures in conjunction with bioinformatics established the identity and virion locations of the major capsid protein (gp56), a decorating protein (gp17), the vRNAP (gp50), the tail sheath (gp65), the appendages (gp66), and the portal protein (gp59). The N4 virion organization provides insight into its assembly and suggests a mechanism for genome and vRNAP transport strategies utilized by this unique system.

Analysis of intermolecular base pair formation of prohead RNA of the phage phi29 DNA packaging motor using NMR spectroscopy

The bacteriophage ø29 DNA packaging motor that assembles on the precursor capsid (prohead) contains an essential 174-nt structural RNA (pRNA) that forms multimers. To determine the structural features of the CE- and D-loops believed to be involved in multimerization of pRNA, 35- and 19-nt RNA molecules containing the CE-loop or the D-loop, respectively, were produced and shown to form a heterodimer in a Mg²⁺-dependent manner, similar to that with full-length pRNA. It has been hypothesized that four intermolecular base pairs are formed between pRNA molecules. Our NMR study of the heterodimer, for the first time, proved directly the existence of two intermolecular Watson–Crick G–C base pairs. The two potential intermolecular A–U base pairs were not observed. In addition, flexibility of the D-loop was found to be important since a Watson–Crick base pair introduced at the base of the D-loop disrupted the formation of the intermolecular G–C hydrogen bonds, and therefore affected heterodimerization. Introduction of this mutation into the biologically active 120-nt pRNA (U80C mutant) resulted in no detectable dimerization at ambient temperature as shown by native gel and sedimentation velocity analyses. Interestingly, this pRNA bound to prohead and packaged DNA as well as the wild-type 120-nt pRNA.

Experimental test of connector rotation during DNA packaging into bacteriophage phi29 capsids

The bacteriophage ϕ29 generates large forces to compact its double-stranded DNA genome into a protein capsid by means of a portal motor complex. Several mechanical models for the generation of these high forces by the motor complex predict coupling of DNA translocation to rotation of the head-tail connector dodecamer. Putative connector rotation is investigated here by combining the methods of single-molecule force spectroscopy with polarization-sensitive single-molecule fluorescence. In our experiment, we observe motor function in several packaging complexes in parallel using video microscopy of bead position in a magnetic trap. At the same time, we follow the orientation of single fluorophores attached to the portal motor connector. From our data, we can exclude connector rotation with greater than 99% probability and therefore answer a long-standing mechanistic question.

The life cycles of many viruses include a self-assembly stage in which a powerful molecular motor packs the DNA genome into the virus's preformed shell (the capsid). Biochemical and biophysical studies have identified essential components of the packaging machinery and measured various characteristics of the packaging process, while crystallography and electron microscopy have provided snapshots of viral structure before and after packaging. In bacteriophage ϕ29 assembly, the DNA passes into the shell through a channel formed by a structure called the connector. Structurally motivated models over the past 30 years have coupled DNA movement to rotation of the connector relative to the capsid. We describe a direct test of the connector rotation hypothesis, combining magnetic single-molecule manipulation techniques and single-molecule fluorescence spectroscopy. In our experiments, we use a single-dye molecule attached specifically to the connector as a reporter for its orientation and simultaneously observe the translocation of a magnetic bead attached to the DNA that is being packaged. From our data, we can exclude connector rotation with greater than 99% probability and therefore answer a long-standing mechanistic question.

dsDNA compaction into bacteriophage capsids is observed in packaging complexes. Unlike in previous models, this compaction is found not to be driven by a rotating motor complex.

Portal motor velocity and internal force resisting viral DNA packaging in bacteriophage phi29

During the assembly of many viruses, a powerful molecular motor compacts the genome into a preassembled capsid. Here, we present measurements of viral DNA packaging in bacteriophage phi29 using an improved optical tweezers method that allows DNA translocation to be measured from initiation to completion. This method allowed us to study the previously uncharacterized early stages of packaging and facilitated more accurate measurement of the length of DNA packaged. We measured the motor velocity versus load at near-zero filling and developed a ramped DNA stretching technique that allowed us to measure the velocity versus capsid filling at near-zero load. These measurements reveal that the motor can generate significantly higher velocities and forces than detected previously. Toward the end of packaging, the internal force resisting DNA confinement rises steeply, consistent with the trend predicted by many theoretical models. However, the force rises to a higher magnitude, particularly during the early stages of packaging, than predicted by models that assume coaxial inverse spooling of the DNA. This finding suggests that the DNA is not arranged in that conformation during the early stages of packaging and indicates that internal force is available to drive complete genome ejection in vitro. The maximum force exceeds 100 pN, which is about one-half that predicted to rupture the capsid shell.

Counting of six pRNAs of phi29 DNA-packaging motor with customized single-molecule dual-view system

Direct imaging or counting of RNA molecules has been difficult owing to its relatively low electron density for EM and insufficient resolution in AFM. Bacteriophage phi29 DNA-packaging motor is geared by a packaging RNA (pRNA) ring. Currently, whether the ring is a pentagon or hexagon is under fervent debate. We report here the assembly of a highly sensitive imaging system for direct counting of the copy number of pRNA within this 20-nm motor. Single fluorophore imaging clearly identified the quantized photobleaching steps from pRNA labeled with a single fluorophore and concluded its stoichiometry within the motor. Almost all of the motors contained six copies of pRNA before and during DNA translocation, identified by dual-color detection of the stalled intermediates of motors containing Cy3-pRNA and Cy5-DNA. The stalled motors were restarted to observe the motion of DNA packaging in real time. Heat-denaturation analysis confirmed that the stoichiometry of pRNA is the common multiple of 2 and 3. EM imaging of procapsid/pRNA complexes clearly revealed six ferritin particles that were conjugated to each pRNA ring.

Alanine scanning and Fe-BABE probing of the bacteriophage ø29 prohead RNA-connector interaction

The DNA packaging motor of the Bacillus subtilis bacteriophage ø29 prohead is comprised in part of an oligomeric ring of 174 base RNA molecules (pRNA) positioned near the N termini of subunits of the dodecameric head-tail connector. Deletion and alanine substitution mutants in the connector protein (gp10) N terminus were assembled into proheads in Escherichia coli and the particles tested for pRNA binding and DNA-gp3 packaging in vitro. The basic amino acid residues RKR at positions 3-5 of the gp10 N terminus were central to pRNA binding during assembly of an active DNA packaging motor. Conjugation of iron(S)-1-(p-bromoacetamidobenzyl) ethylenediaminetetraacetate (Fe-BABE) to residue S170C in the narrow end of the connector, near the N terminus, permitted hydroxyl radical probing of bound [(32)P]pRNA and identified two discrete sites proximal to this residue: the C-helix at the junction of the A, C and D helices, and the E helix and the CE loop/D loop of the intermolecular base pairing site.

The Structure of the ATPase that Powers DNA Packaging into Bacteriophage T4 Procapsids

Packaging the viral genome into empty procapsids, an essential event in the life cycle of tailed bacteriophages and some eukaryotic viruses, is a process that shares features with chromosome assembly. Most viral procapsids possess a special vertex containing a dodecameric portal protein that is used for entry and exit of the viral genome. The portal and an ATPase are parts of the genome-packaging machine. The ATPase is required to provide energy for translocation and compaction of the negative charges on the genomic DNA. Here we report the atomic structure of the ATPase component in a phage DNA-packaging machine. The bacteriophage T4 ATPase has the greatest similarity to monomeric helicases, suggesting that the genome is translocated by an inchworm mechanism. The similarity of the packaging machines in the double-stranded DNA (dsDNA) bacteriophage T4 and dsRNA bacteriophage varphi12 is consistent with the evolution of many virions from a common ancestor.

Structural changes of bacteriophage phi29 upon DNA packaging and release

Cryo-electron microscopy three-dimensional reconstructions have been made of mature and of emptied bacteriophage phi29 particles without making symmetry assumptions. Comparisons of these structures with each other and with the phi29 prohead indicate how conformational changes might initiate successive steps of assembly and infection. The 12 adsorption capable 'appendages' were found to have a structure homologous to the bacteriophage P22 tailspikes. Two of the appendages are extended radially outwards, away from the long axis of the virus, whereas the others are around and parallel to the phage axis. The appendage orientations are correlated with the symmetry-mismatched positions of the five-fold related head fibers, suggesting a mechanism for partial cell wall digestion upon rotation of the head about the tail when initiating infection. The narrow end of the head-tail connector is expanded in the mature virus. Gene product 3, bound to the 5' ends of the genome, appears to be positioned within the expanded connector, which may potentiate the release of DNA-packaging machine components, creating a binding site for attachment of the tail.

Structure of a hexameric RNA packaging motor in a viral polymerase complex

Packaging of the Cystovirus varphi8 genome into the polymerase complex is catalysed by the hexameric P4 packaging motor. The motor is located at the fivefold vertices of the icosahedrally symmetric polymerase complex, and the symmetry mismatch between them may be critical for function. We have developed a novel image-processing approach for the analysis of symmetry-mismatched structures and applied it to cryo-electron microscopy images of P4 bound to the polymerase complex. This approach allowed us to solve the three-dimensional structure of the P4 in situ to 15-A resolution. The C-terminal face of P4 was observed to interact with the polymerase complex, supporting the current view on RNA translocation. We suggest that the symmetry mismatch between the two components may facilitate the ring opening required for RNA loading prior to its translocation.

The structure of an infectious P22 virion shows the signal for headful DNA packaging

Bacteriophages, herpesviruses, and other large double-stranded DNA (dsDNA) viruses contain molecular machines that pump DNA into preassembled procapsids, generating internal capsid pressures exceeding, by 10-fold, that of bottled champagne. A 17 angstrom resolution asymmetric reconstruction of the infectious P22 virion reveals that tightly spooled DNA about the portal dodecamer forces a conformation that is significantly different from that observed in isolated portals assembled from ectopically expressed protein. We propose that the tight dsDNA spooling activates the switch that signals the headful chromosome packing density to the particle exterior.

Mechanism of force generation of a viral DNA packaging motor

A large family of multimeric ATPases are involved in such diverse tasks as cell division, chromosome segregation, DNA recombination, strand separation, conjugation, and viral genome packaging. One such system is the Bacillus subtilis phage phi 29 DNA packaging motor, which generates large forces to compact its genome into a small protein capsid. Here we use optical tweezers to study, at the single-molecule level, the mechanism of force generation in this motor. We determine the kinetic parameters of the packaging motor and their dependence on external load to show that DNA translocation does not occur during ATP binding but is likely triggered by phosphate release. We also show that the motor subunits act in a coordinated, successive fashion with high processivity. Finally, we propose a minimal mechanochemical cycle of this DNA-translocating ATPase that rationalizes all of our findings.

Electron cryomicroscopy of single particles at subnanometer resolution

Electron cryomicroscopy and single-particle reconstruction have advanced substantially over the past two decades. There are now numerous examples of structures that have been solved using this technique to better than 10 A resolution. At such resolutions, direct identification of alpha helices is possible and, often, beta-sheet-containing regions can be identified. The most numerous subnanometer resolution structures are the icosahedral viruses, as higher resolution is easier to achieve with higher symmetry. Important non-icosahedral structures solved to subnanometer resolution include several ribosome structures, clathrin assemblies and, most recently, the Ca2+ release channel. There is now hope that, in the next few years, this technique will achieve resolutions approaching 4 A, permitting a complete trace of the protein backbone without reference to a crystal structure.

Combining X-ray crystallography and electron microscopy

The combination of cryo-electron microscopy to study large biological assemblies at low resolution with crystallography to determine near atomic structures of assembly fragments is quickly expanding the horizon of structural biology. This technique can be used to advantage in the study of large structures that cannot be crystallized, to follow dynamic processes, and to “purify” samples by visual selection of particles. Factors affecting the quality of cryo-electron microscopy maps and limits of accuracy in fitting known structural fragments are discussed.

Classification and three-dimensional reconstruction of unevenly distributed or symmetry mismatched features of icosahedral particles

Methods for the three-dimensional reconstruction of icosahedral particles, such as spherical viruses, from electron micrographs are well established. These methods take advantage of the 60-fold symmetry of the icosahedral group. Several features within these particles, however, may deviate from icosahedral symmetry. Examples include viral genomes, symmetry mismatched vertex proteins, unique DNA packaging vertices, flexible proteins, and proteins that are present at less than 100% occupancy. Such asymmetrically distributed features are smeared in the final density map when icosahedral symmetry is applied. Here, we describe a novel approach to classifying, analysing, and obtaining three-dimensional reconstructions of such features. The approach uses the orientation information derived from the icosahedral orientation search to facilitate multivariate statistical analysis and to limit the orientational degrees of freedom for reconstruction. We demonstrate the application of this approach to images of Kelp fly Virus. In this case, each virion may have two different types of fivefold vertex. We use our approach to produce independent reconstructions of the two types of vertex.

A simple mathematical formula for stoichiometry quantification of viral and nanobiological assemblage using slopes of log/log plot curves

In nanotechnology, biomolecular assemblies serve not only as model systems for the construction of nanodevices, but they can also be used directly as templates for the formation of nanostructures. Biological nano-building blocks can either be isolated as complete functional units from living cells or viruses (biological "Top down" approach) or formed by biomolecular assembly from recombinant or synthetic components ("Bottom up" approach). In both cases, rational design of nanostructures requires knowledge of the stoichiometry of the biological structures, which frequently occur as multimers, i.e., the morphological complex is composed of multiple copies of one or more macromolecules. In this paper, a method is described for the stoichiometric quantification of molecules in bio-nanostructures. The method is based on using dilution factors and relative concentrations rather than absolute quantities, which are often difficult to determine, especially in short-lived assembly intermediates. The approach exploits the fact that the larger the stoichiometry of the component is, the more dramatic is the influence of the dilution factor (decrease in concentration) on the reaction. We established and used the method to determine the stoichiometry of components of bacterial virus phi29. The log of dilution factors was plotted against the log of reaction yield. The stoichiometry Z was determined with the equation Z=-1.58+2.4193T-0.001746T(2) [T in (0,1000), or 90 degree angle alpha in (0 degrees, 89.9 degrees )], where T is the slope of the curve (tangent of 90 degree angle alpha, which is the angle between the x-axis and the concentration dependent curve). Z can also be determined from a standard table given in this report. With the bacteriophage phi29 in vitro assembly system, up to 5x10(8) infectious virions per ml can be assembled from 11 purified components, giving our method a sensitivity of nine orders of magnitude. We confirmed the stoichiometries of phi29 components that were determined previously with microscopic approaches. The described method also responded to programmed stoichiometry changes, which were generated by assembling the phi29 DNA packaging motor from modified pRNA (DNA-packaging RNA) molecules forming a trimer of dimers or a dimer of trimers, instead of the wild-type hexamer.

Structural roles of subunit cysteines in the folding and assembly of the DNA packaging machine (portal) of bacteriophage P22

The DNA packaging machine (portal assembly) of bacteriophage P22 is constructed from 12 copies of a multidomain 725-residue subunit comprising a complex alpha/beta fold. The portal subunit contains four cysteines (Cys 153, Cys 173, Cys 283, and Cys 516), which produce distinctive Raman markers in the spectral interval 2500-2600 cm(-1) originating from S-H bond-stretching vibrations diagnostic of S-H...X hydrogen-bonding interactions. The Raman spectrum is unique in the capability to characterize cysteine sulfhydryl interactions in proteins and shows that portal cysteine environments are significantly altered by assembly (Rodriguez-Casado et al. (2001) Biochemistry 40, 13583-13591). We have employed site-directed mutagenesis, size-exclusion chromatography, and Raman difference spectroscopy to characterize the roles of portal cysteines in subunit folding and dodecamer assembly. The stability of the portal monomer is severely reduced by a Cys --> Ser point mutation introduced at either residue 173 or 516. In the case of C516S, the destabilized monomer still forms portal rings, as visualized by negative-stain electron microscopy, whereas portal ring formation cannot be detected for C173S, which forms aberrant aggregates. The C283S mutant is a hyperstable monomer that is defective in portal ring formation. Interestingly, Cys 283 is suggested by secondary structure homology with the phi29 portal to be within a domain involved in DNA translocation. Conversely, the phenotype of the C153S mutant is close to that of the wild-type protein, implying that the sulfhydryl moiety of Cys 153 is not essential to formation of the native subunit fold and productive assembly dynamics. The present results demonstrate that cysteines of the P22 portal protein span a wide range of sulfhydryl hydrogen-bonding strengths in the wild-type assembly, that three of the four sulfhydryls play key roles in portal protein stability and assembly kinetics, and that substitution of a mutant seryl interaction (O-H...X) for a wild-type cysteinyl interaction (S-H...X) can either stabilize or destabilize the native fold depending upon sequence context.

Models of bacteriophage DNA packaging motors

An ATP-dependent motor drives a DNA genome into a bacteriophage capsid during morphogenesis of double-stranded DNA bacteriophages both in vivo and in vitro. The DNA molecule enters the capsid through a channel in the center of a symmetric protein ring called a connector. Mechanisms in two classes have been proposed for this motor: (1) An ATP-driven rotating connector pulls a DNA molecule via serial power strokes. (2) The connector rectifies DNA motion that is either thermal, biased thermal, or oscillating electrical field-induced (motor-ratchet hypothesis). Mechanisms in the first class have previously been proposed to explain the detailed structure of DNA packaging motors. The present study demonstrates that the motor-ratchet hypothesis also explains the current data, including data in the following categories: biochemical genetics, energetics, structure, and packaging dynamics.

Structure and function of phi29 hexameric RNA that drives the viral DNA packaging motor: review

One notable feature of linear dsDNA viruses is that, during replication, their lengthy genome is squeezed with remarkable velocity into a preformed procapsid and packed into near crystalline density. A molecular motor using ATP as energy accomplishes this energetically unfavorable motion tack. In bacterial virus phi29, an RNA (pRNA) molecule is a vital component of this motor. This 120-base RNA has many novel and distinctive features. It contains strong secondary structure, is tightly folded, and unusually stable. Upon interaction with ion and proteins, it has a knack to adapt numerous conformations to perform versatile function. It can be easily manipulated to form stable homologous monomers, dimers, trimers and hexamers. As a result, many unknown properties of RNA have been and will be unfolded by the study of this extraordinary molecule. This article reviews the structure and function of this pRNA and focuses on novel methods and unique approaches that lead to the illumination of its structure and function.

Computer modeling of three-dimensional structure of DNA-packaging RNA (pRNA) monomer, dimer, and hexamer of Phi29 DNA packaging motor

A striking common feature in the maturation of all linear double-stranded DNA viruses is that their lengthy genome is translocated with remarkable velocity into the limited space within a preformed protein shell and packaged into near crystalline density. A DNA-translocating motor, powered by ATP hydrolysis, accomplishes this task, which would otherwise be energetically unfavorable. DNA-packaging RNA, pRNA, forms a hexameric complex to serve as a vital component of the DNA translocating motor of bacterial virus Phi29. The sequential action of six pRNA ensures continual function in the DNA translocation process. The Phi29 motor has been assembled with purified components synthesized by chemical or biotechnological approaches and is able to pump the viral DNA into the protein shell in vitro. pRNA dimers are the building blocks of the hexamer. The computer models of the three-dimensional structure of the motor was constructed based on experimental data derived from photoaffinity cross-linking by psoralen, phenphi (cis-Rh(1,10-phenanthroline)(9,10-phenan-threnequinone diimine)Cl(2)(+)), and azidophenacyl; chemical modification and chemical modification interference with dimethyl sulfate, 1-cyclohexyl-3-(2-morpholinoethyl)carbodiimide metho-p-toluene sulfonate, and kethoxal; complementary modification; and nuclease probing by single- and double-stranded specific RNases. The shapes of these computer models are very similar to the published pRNA images of cryo-atomic force microscopy. pRNA hexamer docking with the connector crystal structure reveals a very impressive match with the available biochemical, genetic, and physical data.

Structure of bacteriophage P22 portal protein in relation to assembly: investigation by Raman spectroscopy

Salmonella phage P22, which serves as an assembly paradigm for icosahedral double-stranded DNA viruses, packages its viral genome through a capsid channel (portal) comprising 12 copies of a 725-residue subunit. Secondary and tertiary structures of the portal subunit in monomeric and dodecameric states have been investigated by Raman spectroscopy using a His6-tagged recombinant protein that self-assembles in vitro [Moore, S. D., and Prevelige, P. E., Jr. (2001) J. Biol. Chem. 276, 6779-6788]. The portal protein exhibits Raman secondary structure markers typical of a highly alpha-helical subunit fold that is little perturbed by assembly. On the other hand, Raman markers of subunit side chains change dramatically with assembly, an indication of extensive changes in side chain environments. The cysteinyl Raman signature of the portal consists of a complex pattern of sulfhydryl stretching bands, revealing diverse hydrogen-bonding states for the four S-H groups per subunit (Cys 153, Cys 173, Cys 283, and Cys 516). Upon assembly, the population of strongly hydrogen-bonded S-H groups decreases, while the population of weakly hydrogen-bonded S-H groups increases, implying that specific intrasubunit S-H.X hydrogen bonds must be weakened to effect dodecamer assembly and that the molecular mechanism involves reorganization of subunit domains without appreciable changes in domain conformations. Comparison with other viral protein assemblies suggests an assembly process not requiring metastable intermediates. The recently published X-ray structure of the phi29 portal [Simpson, A. A., et al. (2000) Nature 408, 745-750] shows that residues 125-225 lining the channel surface form alpha-helical modules spaced by short beta-strands and turns; a surprisingly close secondary structure homology is predicted for residues 240-350 of the P22 portal, despite no apparent sequence homology. This motif is proposed as an evolutionarily conserved domain involved in DNA translocation.