Stability of membrane proteins: relevance for the selection of appropriate methods for high-resolution structure determinations

Large-scale overproduction, functional purification and ligand affinities of the His-tagged human histamine H1 receptor

This report describes an efficient strategy for amplified functional purification of the human H1 receptor after heterologous expression in Sf9 cells. The cDNA encoding a C-terminally histidine-tagged (10xHis) human histamine H1 receptor was used to generate recombinant baculovirus in a Spodoptera frugiperda-derived cell line (IPLB-Sf9). As judged from its ligand affinity profile, functional receptor could be expressed at high levels (30-40 pmol per 10(6) cells). Rapid proteolysis in the cell culture led to limited fragmentation, without loss of ligand binding, but could be efficiently suppressed by including the protease inhibitor leupeptin during cell culture and all subsequent manipulations. Effective solubilization of functional receptor with optimal recovery and stability required the use of dodecylmaltoside as a detergent in the presence of a high concentration of NaCl and of a suitable inverse agonist. Efficient purification of solubilized receptor could be achieved by affinity chromatography over nickel(II) nitrilotriacetic acid resin. Functional membrane reconstitution of purified H1 receptor was accomplished in mixed soybean lipids (asolectin). The final proteoliposomic H1 receptor preparation has a purity greater than 90% on a protein basis and displays a ligand binding affinity profile very similar to the untagged receptor expressed in COS-7 cells. In conclusion, we are able to produce pharmacologically viable H1 receptor in a stable membrane environment allowing economic large-batch operation. This opens the way to detailed studies of structure-function relationships of this medically and biologically important receptor protein by 3D-crystallography, FT-IR spectroscopy and solid-state NMR spectroscopy.

Small angle x-ray scattering from lipid-bound myelin basic protein in solution

The structure of myelin basic protein (MBP), purified from the myelin sheath in both lipid-free (LF-MBP) and lipid-bound (LB-MBP) forms, was investigated in solution by small angle x-ray scattering. The water-soluble LF-MBP, extracted at pH < 3.0 from defatted brain, is the classical preparation of MBP, commonly regarded as an intrinsically unfolded protein. LB-MBP is a lipoprotein-detergent complex extracted from myelin with its native lipidic environment at pH > 7.0. Under all conditions, the scattering from the two protein forms was different, indicating different molecular shapes. For the LB-MBP, well-defined scattering curves were obtained, suggesting that the protein had a unique, compact (but not globular) structure. Furthermore, these data were compatible with earlier results from molecular modeling calculations on the MBP structure which have been refined by us. In contrast, the LF-MBP data were in accordance with the expected open-coil conformation. The results represent the first direct structural information from x-ray scattering measurements on MBP in its native lipidic environment in solution.

Structure of the HERG K+ channel S5P extracellular linker: role of an amphipathic alpha-helix in C-type inactivation

The HERG K+ channel has very unusual kinetic behavior that includes slow activation but rapid inactivation. These features are critical for normal cardiac repolarization as well as in preventing lethal ventricular arrhythmias. Mutagenesis studies have shown that the extracellular peptide linker joining the fifth transmembrane domain to the pore helix is critical for rapid inactivation of the HERG K+ channel. This peptide linker is also considerably longer in HERG K+ channels, 40 amino acids, than in most other voltage-gated K+ channels. In this study we show that a synthetic 42-residue peptide corresponding to this linker region of the HERG K+ channel does not have defined structural elements in aqueous solution; however, it displays two well defined helical regions when in the presence of SDS micelles. The helices correspond to Trp585-Ile593 and Gly604-Tyr611 of the channel. The Trp585-Ile593 helix has distinct hydrophilic and hydrophobic surfaces. The Gly604-Tyr611 helix corresponds to an N-terminal extension of the pore helix. Electrophysiological studies of HERG currents following application of exogenous S5P peptides show that the amphipathic helix in the S5P linker interacts with the pore region of the channel in a voltage-dependent manner.

Electron microscopic evidence for nucleation and growth of 3D acetylcholine receptor microcrystals in structured lipid-detergent matrices

Nicotinic acetylcholine receptors (AChRs) belong to a superfamily of oligomeric proteins that transduce electric signals across the cell membrane on binding of neurotransmitters. These receptors harbor a large extracellular ligand-binding domain directly linked to an ion-conducting channel-forming domain that spans the cell membrane 20 times and considerably extends into the cytoplasm. Thus far, none of these receptor channels has been crystallized in three dimensions. The crystallization of the AChR from Torpedo marmorata electric organs is challenged here in lipidic-detergent matrices. Detergent-soluble AChR complexed with alpha-bungarotoxin (alphaBTx), a polypeptidic competitive antagonist, was purified. The AChR-alphaBTx complex was reconstituted in a lipidic matrix composed of monoolein bilayers that are structured in three dimensions. The alphaBTx was conjugated to a photo-stable fluorophore, enabling us to monitor the physical behavior of the receptor-toxin complex in the lipidic matrix under light stereomicroscope, and to freeze fracture regions containing the receptor-toxin complex for visualization under a transmission electron microscope. Conditions were established for forming 2D receptor-toxin lattices that are stacked in the third dimension. 3D AChR nanocrystals were thereby grown inside the highly viscous lipidic 3D matrix. Slow emulsification of the lipidic matrix converted these nanocrystals into 3D elongated thin crystal plates of micrometer size. The latter are stable in detergent-containing aqueous solutions and can currently be used for seeding and epitaxial growth, en route to crystals of appropriate dimensions for x-ray diffraction studies.

The versatile beta-barrel membrane protein

The beta-barrel membrane protein is found in the outer membranes of bacteria, mitochondria and chloroplasts. Approximately 2-3% of the genes in Gram-negative bacterial genomes encode beta-barrels. Whereas there are fewer than 20 known three-dimensional beta-barrel structures, genomic databases currently contain thousands of beta-barrels belonging to dozens of families. New research is revealing the variety of beta-barrel structures and the variety of functions performed by these versatile proteins.

Single-step immunoaffinity purification and characterization of dodecylmaltoside-solubilized human neutrophil flavocytochrome b

Flavocytochrome b (Cyt b) is a heterodimeric, integral membrane protein that serves as the central component of an electron transferase system employed by phagocytes for elimination of bacterial and fungal pathogens. This report describes a rapid and efficient single-step purification of Cyt b from human neutrophil plasma membranes by solubilization in the nonionic detergent dodecylmaltoside (DDM) and immunoaffinity chromatography. A similar procedure for isolation of Cyt b directly from intact neutrophils by a combination of heparin and immunoaffinity chromatography is also presented. The stability of Cyt b was enhanced in DDM relative to previously employed solubilizing agents as determined by both monitoring the heme spectrum in crude membrane extracts and assaying resistance to proteolytic degradation following purification. Gel filtration chromatography and dynamic light scattering indicated that DDM maintains a predominantly monodisperse population of Cyt b following immunoaffinity purification. The high degree of purity obtained with this isolation procedure allowed for direct determination of a 2:1 heme to protein stoichiometry, confirming previous structural models. Analysis of the isolated heterodimer by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry allowed for accurate mass determination of p22(phox) as indicated by the gene sequence. Affinity-purified Cyt b was functionally reconstituted into artificial bilayers and demonstrated that catalytic activity of the protein was efficiently retained throughout the purification procedure.

Extending the structure of an ABC transporter to atomic resolution: modeling and simulation studies of MsbA

Molecular modeling and simulation approaches have been use to generate a complete model of the prokaryotic ABC transporter MsbA from Escherichia coli, starting from the low-resolution structure-based Calpha trace (PDB code 1JSQ). MsbA is of some biomedical interest as it is homologous to mammalian transporters such as P-glycoprotein and TAP. The quality of the MsbA model is assessed using a combination of molecular dynamics simulations and static structural analysis. These results suggest that the approach adopted for MsbA may be of general utility for generating all atom models from low-resolution crystal structures of membrane proteins. Molecular dynamics simulations of the MsbA model inserted in a fully solvated octane slab (a membrane mimetic environment) reveal that while the monomer is relatively stable, the dimer is unstable and undergoes significant conformational drift on a nanosecond time scale. This suggests that the MsbA crystal dimer may not correspond to the MsbA dimer in vivo. An alternative model of the dimer is discussed in the context of available experimental data.

Analyzing heat capacity profiles of peptide-containing membranes: cluster formation of gramicidin A

The analysis of peptide and protein partitioning in lipid membranes is of high relevance for the understanding of biomembrane function. We used statistical thermodynamics analysis to demonstrate the effect of peptide mixing behavior on heat capacity profiles of lipid membranes with the aim to predict peptide aggregation from c(P)-profiles. This analysis was applied to interpret calorimetric data on the interaction of the antibiotic peptide gramicidin A with lipid membranes. The shape of the heat capacity profiles was found to be consistent with peptide clustering in both gel and fluid phase. Applying atomic force microscopy, we found gramicidin A aggregates and established a close link between thermodynamics data and microscopic imaging. On the basis of these findings we described the effect of proteins on local fluctuations. It is shown that the elastic properties of the membrane are influenced in the peptide environment.

In vitro folding of alpha-helical membrane proteins

For large-scale production, as required in structural biology, membrane proteins can be expressed in an insoluble form as inclusion bodies and be refolded in vitro. This requires refolding conditions where the native form is thermodynamically stable and where nonproductive pathways leading to aggregation are avoided. Examples of successful refolding are reviewed and general guidelines to establish refolding protocols of membrane proteins are presented.

The expression of outer membrane proteins for crystallization

The production of sufficient amounts of chemically and conformationally homogenous protein is a major requirement for successful crystallization and structure determination. With membrane proteins, this constitutes a particular problem because the membrane volume is limited and the organisms are usually very sensitive to changes in membrane properties brought about by massive protein insertion. Moreover, the extraction of membrane proteins from the membrane with detergents is generally a harsh treatment, which gives rise to conformational aberrations. A number of successful procedures for functional expression followed by purification are reviewed here together with nonfunctional expression into inclusion bodies and subsequent (re)folding to produce functional proteins. Most of the data are for prokaryotic outer membrane proteins, but the outer membrane proteins of eukaryotic organelles are also considered as they do show similar features.

The crystallographic model of rhodopsin and its use in studies of other G protein-coupled receptors

G protein-coupled receptors (GPCRs) are integral membrane proteins that respond to environmental signals and initiate signal transduction pathways activating cellular processes. Rhodopsin is a GPCR found in rod cells in retina where it functions as a photopigment. Its molecular structure is known from cryo-electron microscopic and X-ray crystallographic studies, and this has reshaped many structure/function questions important in vision science. In addition, this first GPCR structure has provided a structural template for studies of other GPCRs, including many known drug targets. After presenting an overview of the major structural elements of rhodopsin, recent literature covering the use of the rhodopsin structure in analyzing other GPCRs will be summarized. Use of the rhodopsin structural model to understand the structure and function of other GPCRs provides strong evidence validating the structural model.

Progress in the analysis of membrane protein structure and function

Structural information on membrane proteins is sparse, yet they represent an important class of proteins that is encoded by about 30% of all genes. Progress has primarily been achieved with bacterial proteins, but efforts to solve the structure of eukaryotic membrane proteins are also increasing. Most of the structures currently available have been obtained by exploiting the power of X-ray crystallography. Recent results, however, have demonstrated the accuracy of electron crystallography and the imaging power of the atomic force microscope. These instruments allow membrane proteins to be studied while embedded in the bi-layer, and thus in a functional state. The low signal-to-noise ratio of cryo-electron microscopy is overcome by crystallizing membrane proteins in a two-dimensional protein-lipid membrane, allowing its atomic structure to be determined. In contrast, the high signal-to-noise ratio of atomic force microscopy allows individual protein surfaces to be imaged at sub-nanometer resolution, and their conformational states to be sampled. This review summarizes the steps in membrane protein structure determination and illuminates recent progress.