Pyrococcus furiosus sp. nov. represents a novel genus of marine heterotrophic archaebacteria growing optimally at 100�C

Perspectives on Cultivation Strategies of Archaea

Archaea have been recognized as a major domain of life since the 1970s and occupy a key position in the tree of life. Recent advances in culture-independent approaches have greatly accelerated the research son Archaea. However, many hypotheses concerning the diversity, physiology, and evolution of archaea are waiting to be confirmed by culture-base experiments. Consequently, archaeal isolates are in great demand. On the other hand, traditional approaches of archaeal cultivation are rarely successful and require urgent improvement. Here, we review the current practices and applicable microbial cultivation techniques, to inform on potential strategies that could improve archaeal cultivation in the future. We first summarize the current knowledge on archaeal diversity, with an emphasis on cultivated and uncultivated lineages pertinent to future research. Possible causes for the low success rate of the current cultivation practices are then discussed to propose future improvements. Finally, innovative insights for archaeal cultivation are described, including (1) medium refinement for selective cultivation based on the genetic and transcriptional information; (2) consideration of the up-to-date archaeal culturing skills; and (3) application of multiple cultivation techniques, such as co-culture, direct interspecies electron transfer (DIET), single-cell isolation, high-throughput culturing (HTC), and simulation of the natural habitat. Improved cultivation efforts should allow successful isolation of as yet uncultured archaea, contributing to the much-needed physiological investigation of archaea.

Integration of large heterologous DNA fragments into the genome of Thermococcus kodakarensis

In this study, a transformation system enabling large-scale gene recombination was developed for the hyperthermophilic archaeon Thermococcus kodakarensis. Using the uracil auxotroph T. kodakarensis KU216 (∆pyrF) as a parent strain, we constructed multiple host strains harboring two 1-kbp DNA regions from the genomes of either the hyperthermophilic archaeon Pyrococcus furiosus or Methanocaldococcus jannaschii. The two regions were selected so that the regions between them on the respective genomes would include pyrF genes, which can potentially be used for selection. Transformation using these host strains and genomic DNA from P. furiosus or M. jannaschii were carried out. Transformants with exogenous pyrF were obtained only using host strains with regions from P. furiosus, and only when the distances between the two regions were relatively short (2-5 kbp) on the P. furiosus genome. To insert longer DNA fragments, we examined the possibilities of using P. furiosus cells to provide intact genomic DNA. A cell pellet of P. furiosus was overlaid with that of T. kodakarensis so that cells were in direct contact. As a result, we were able to isolate T. kodakarensis strains harboring DNA fragments from P. furiosus with lengths of up to 75 kbp in a single transformation step.

What we learn from extremophiles

Extremophiles are microorganisms that love extreme conditions, such as high temperatures up to the boiling point of water or low temperatures down to below the freezing point. Moreover, some extreme microbes prefer to live in acidic or alkaline environments, under high pressure or high salinity. Three extremophilic species are presented in this article: Lacinutrix algicola, a psychrophilic bacterium that grows at temperatures between 0 and 25 °C, Anaerobranca gottschalkii, a thermophilic and alkaliphilic bacterium growing optimally at 50–55 °C under alkaline conditions, and Pyrococcus furiosus, a famous hyperthermophilic archaeon that prefers 100 °C for growth. These extraordinary microorganisms are examples of extremophiles that possess remarkable adaptation mechanisms and additionally produce unique enzymes called extremozymes. These robust biocatalysts can be applied in various biotechnologic processes to enable substrate conversions under extreme process conditions. Due to their unusual properties, extremophiles and extremozymes will play a pivotal role in the development of modern circular bioeconomy.

Alkaliphiles: The Versatile Tools in Biotechnology

The extreme environments within the biosphere are inhabited by organisms known as extremophiles. Lately, these organisms are attracting a great deal of interest from researchers and industrialists. The motive behind this attraction is mainly related to the desire for new and efficient products of biotechnological importance and human curiosity of understanding nature. Organisms living in common "human-friendly" environments have served humanity for a very long time, and this has led to exhaustion of the low-hanging "fruits," a phenomenon witnessed by the diminishing rate of new discoveries. For example, acquiring novel products such as drugs from the traditional sources has become difficult and expensive. Such challenges together with the basic research interest have brought the exploration of previously neglected or unknown groups of organisms. Extremophiles are among these groups which have been brought to focus and garnering a growing importance in biotechnology. In the last few decades, numerous extremophiles and their products have got their ways into industrial, agricultural, environmental, pharmaceutical, and other biotechnological applications.Alkaliphiles, organisms which thrive optimally at or above pH 9, are one of the most important classes of extremophiles. To flourish in their extreme habitats, alkaliphiles evolved impressive structural and functional adaptations. The high pH adaptation gave unique biocatalysts that are operationally stable at elevated pH and several other novel products with immense biotechnological application potential. Advances in the cultivation techniques, success in gene cloning and expression, metabolic engineering, metagenomics, and other related techniques are significantly contributing to expand the application horizon of these remarkable organisms of the 'bizarre' world. Studies have shown the enormous potential of alkaliphiles in numerous biotechnological applications. Although it seems just the beginning, some fantastic strides are already made in tapping this potential. This work tries to review some of the prominent applications of alkaliphiles by focusing such as on their enzymes, metabolites, exopolysaccharides, and biosurfactants. Moreover, the chapter strives to assesses the whole-cell applications of alkaliphiles including in biomining, food and feed supplementation, bioconstruction, microbial fuel cell, biofuel production, and bioremediation.

Steady-state kinetics of the tungsten containing aldehyde: ferredoxin oxidoreductases from the hyperthermophilic archaeon Pyrococcus furiosus

The tungsten containing Aldehyde:ferredoxin oxidoreductases (AOR) offer interesting opportunities for biocatalytic approaches towards aldehyde oxidation and carboxylic acid reduction. The hyperthermophilic archaeon Pyrococcus furiosus encodes five different AOR family members: glyceraldehyde-3-phosphate oxidoreductase (GAPOR), aldehyde oxidoreductase (AOR), and formaldehyde oxidoreductase (FOR), WOR4 and WOR5. GAPOR functions as a glycolytic enzyme and is highly specific for the substrate glyceraldehyde-3-phosphate (GAP). AOR, FOR and WOR5 have a broad substrate spectrum, and for WOR4 no substrate has been identified to date. As ambiguous kinetic parameters have been reported for different AOR family enzymes the steady state kinetics under different physiologically relevant conditions was explored. The GAPOR substrate GAP was found to degrade at 60 °C by non-enzymatic elimination of the phosphate group to methylglyoxal with a half-life t_1/2 = 6.5 min. Methylglyoxal is not a substrate or inhibitor of GAPOR. D-GAP was identified as the only substrate oxidized by GAPOR, and the kinetics of the enzyme was unaffected by the presence of L-GAP, which makes GAPOR the first enantioselective enzyme of the AOR family. The steady-state kinetics of GAPOR showed partial substrate inhibition, which assumes the GAP inhibited form of the enzyme retains some activity. This inhibition was found to be alleviated completely by a 1 M NaCl resulting in increased enzyme activity at high substrate concentrations. GAPOR activity was strongly pH dependent, with the optimum at pH 9. At pH 9, the substrate is a divalent anion and, therefore, positively charged amino acid residues are likely to be involved in the binding of the substrate. FOR exhibited a significant primary kinetic isotope effect of the apparent Vmax for the deuterated substrate, formaldehyde-d₂, which shows that the rate-determining step involves a CH bond break from the aldehyde. The implications of these results for the reaction mechanism of tungsten-containing AORs, are discussed.

Thermostable iron oxide nanoparticle synthesis within recombinant ferritins from the hyperthermophile Pyrococcus yayanosii CH1

Thermostable nanoparticles have numerous applications in catalysis and in the oil/gas industry. However, synthesizing these nanoparticles requires expensive polymers. Here, a novel thermostable ferritin named PcFn, originally from the hyperthermophilic archaeon Pyrococcus yayanosii CH1, was overexpressed in Escherichia coli, purified and characterized, which could successfully direct the synthesis of thermostable magnetoferritins (M-PcFn) with monodispersed iron oxide nanoparticles in one step. Transmission electron microscopy and magnetic measurements show that the cores of the M-PcFn have an average diameter of 4.7 nm, are well-crystalline and superparamagnetic. Both the PcFn and M-PcFn can resist temperatures up to 110 °C, which is significantly higher than for human H-chain ferritin (HFn) and M-HFn, and comparable to temperatures previously reported for Pyrococcus furiosus ferritin (PfFn) and M-PfFn. After heating at 110 °C for 30 minutes, PcFn and M-PcFn maintained their secondary structures and PcFn retained 87.4% of its iron uptake activity. This remarkable thermostability of PcFn and M-PcFn suggests potential applications in elevated temperature environments.

The global distribution and evolutionary history of the pT26-2 archaeal plasmid family

Although plasmids play an important role in biological evolution, the number of plasmid families well‐characterized in terms of geographical distribution and evolution remains limited, especially in archaea. Here, we describe the first systematic study of an archaeal plasmid family, the pT26‐2 plasmid family. The in‐depth analysis of the distribution, biogeography and host–plasmid co‐evolution patterns of 26 integrated and 3 extrachromosomal plasmids of this plasmid family shows that they are widespread in Thermococcales and Methanococcales isolated from around the globe but are restricted to these two orders. All members of the family share seven core genes but employ different integration and replication strategies. Phylogenetic analysis of the core genes and CRISPR spacer distribution suggests that plasmids of the pT26‐2 family evolved with their hosts independently in Thermococcales and Methanococcales, despite these hosts exhibiting similar geographic distribution. Remarkably, core genes are conserved even in integrated plasmids that have lost replication genes and/or replication origins suggesting that they may be beneficial for their hosts. We hypothesize that the core proteins encode for a novel type of DNA/protein transfer mechanism, explaining the widespread oceanic distribution of the pT26‐2 plasmid family.

A journey down to hell: new thermostable protein-tags for biotechnology at high temperatures

The specific labelling of proteins in recent years has made use of self-labelling proteins, such as the SNAP-tag^® and the Halotag^®. These enzymes, by their nature or suitably engineered, have the ability to specifically react with their respective substrates, but covalently retaining a part of them in the catalytic site upon reaction. This led to the synthesis of substrates conjugated with, e.g., fluorophores (proposing them as alternatives to fluorescent proteins), but also with others chemical groups, for numerous biotechnological applications. Recently, a mutant of the OGT from Saccharolobus solfataricus (H⁵) very stable to high temperatures and in the presence of physical and chemical denaturing agents has been proposed as a thermostable SNAP-tag^® for in vivo and in vitro harsh reaction conditions. Here, we show two new thermostable OGTs from Thermotoga neapolitana and Pyrococcus furiosus, which, respectively, display a higher catalytic activity and thermostability respect to H⁵, proposing them as alternatives for in vivo studies in these extreme model organisms.

Phylogenetic Diversity of Archaea in Shallow Hydrothermal Vents of Eolian Islands, Italy

Shallow hydrothermal systems (SHS) around the Eolian Islands (Italy), related to both active and extinct volcanism, are characterized by high temperatures, high concentrations of CO2 and H2S, and low pH, prohibitive for the majority of eukaryotes which are less tolerant to the extreme conditions than prokaryotes. Archaea and bacteria are the key elements for the functioning of these ecosystems, as they are involved in the transformation of inorganic compounds released from the vent emissions and are at the basis of the hydrothermal system food web. New extremophilic archaea (thermophilic, hyperthermophilic, acidophilic, alkalophilic, etc.) have been isolated from vents of Vulcano Island, exhibiting interesting features potentially valuable in biotechnology. Metagenomic analyses, which mainly involved molecular studies of the 16S rRNA gene, provided different insights into microbial composition associated with Eolian SHS. Archaeal community composition at Eolian vent sites results greatly affected by the geochemistry of the studied vents, principally by hypersaline conditions and declining temperatures. Archaeal community in sediments was mostly composed by hyperthermophilic members of Crenarchaeota (class Thermoprotei) and Euryarchaeota (Thermococci and Methanococci) at the highest temperature condition. Mesophilic Euryarchaeota (Halobacteria, Methanomicrobia, and Methanobacteria) increased with decreasing temperatures. Eolian SHS harbor a high diversity of largely unknown archaea, and the studied vents may be an important source of new isolates potentially useful for biotechnological purposes.

Crystal structure of the novel lesion-specific endonuclease PfuEndoQ from Pyrococcus furiosus

Because base deaminations, which are promoted by high temperature, ionizing radiation, aerobic respiration and nitrosative stress, produce mutations during replication, deaminated bases must be repaired quickly to maintain genome integrity. Recently, we identified a novel lesion-specific endonuclease, PfuEndoQ, from Pyrococcus furiosus, and PfuEndoQ may be involved in the DNA repair pathway in Thermococcales of Archaea. PfuEndoQ recognizes a deaminated base and cleaves the phosphodiester bond 5' of the lesion site. To elucidate the structural basis of the substrate recognition and DNA cleavage mechanisms of PfuEndoQ, we determined the structure of PfuEndoQ using X-ray crystallography. The PfuEndoQ structure and the accompanying biochemical data suggest that PfuEndoQ recognizes a deaminated base using a highly conserved pocket adjacent to a Zn2+-binding site and hydrolyses a phosphodiester bond using two Zn2+ ions. The PfuEndoQ-DNA complex is stabilized by a Zn-binding domain and a C-terminal helical domain, and the complex may recruit downstream proteins in the DNA repair pathway.

Next Generation DNA-Seq and Differential RNA-Seq Allow Re-annotation of the Pyrococcus furiosus DSM 3638 Genome and Provide Insights Into Archaeal Antisense Transcription

Pyrococcus furiosus DSM 3638 is a model organism for hyperthermophilic archaea with an optimal growth temperature near 100°C. The genome was sequenced about 18 years ago. However, some publications suggest that in contrast to other Pyrococcus species, the genome of P. furiosus DSM 3638 is prone to genomic rearrangements. Therefore, we re-sequenced the genome using third generation sequencing techniques. The new de novo assembled genome is 1,889,914 bp in size and exhibits high sequence identity to the published sequence. However, two major deviations were detected: (1) The genome is 18,342 bp smaller than the NCBI reference genome due to a recently described deletion. (2) The region between PF0349 and PF0388 is inverted most likely due an assembly problem for the original sequence. In addition, numerous minor variations, ranging from single nucleotide exchanges, deletions or insertions were identified. The total number of insertion sequence (IS) elements is also reduced from 30 to 24 in the new sequence. Re-sequencing of a 2-year-old “lab culture” using Nanopore sequencing confirmed the overall stability of the P. furiosus DSM 3638 genome even under normal lab conditions without taking any special care. To improve genome annotation, the updated DNA sequence was combined with an RNA sequencing approach. Here, RNAs from eight different growth conditions were pooled to increase the number of detected transcripts. Furthermore, a differential RNA-Seq approach was employed for the identification of transcription start sites (TSSs). In total, 2515 TSSs were detected and classified into 834 primary (pTSS), 797 antisense (aTSS), 739 internal and 145 secondary TSSs. Our analysis of the upstream regions revealed a well conserved archaeal promoter structure. Interrogation of the distances between pTSSs and aTSSs revealed a significant number of antisense transcripts, which are a result of bidirectional transcription from the same TATA box. This mechanism of antisense transcript production could be further confirmed by in vitro transcription experiments. We assume that bidirectional transcription gives rise to non-functional antisense RNAs and that this is a widespread phenomenon in archaea due to the architecture of the TATA element and the symmetric structure of the TATA-binding protein.

Inward-facing conformation of a multidrug resistance MATE family transporter

Multidrug and toxic compound extrusion (MATE) transporters mediate excretion of xenobiotics and toxic metabolites, thereby conferring multidrug resistance in bacterial pathogens and cancer cells. Structural information on the alternate conformational states and knowledge of the detailed mechanism of MATE transport are of great importance for drug development. However, the structures of MATE transporters are only known in V-shaped outward-facing conformations. Here, we present the crystal structure of a MATE transporter from Pyrococcus furiosus (PfMATE) in the long-sought-after inward-facing state, which was obtained after crystallization in the presence of native lipids. Transition from the outward-facing state to the inward-facing state involves rigid body movements of transmembrane helices (TMs) 2-6 and 8-12 to form an inverted V, facilitated by a loose binding of TM1 and TM7 to their respective bundles and their conformational flexibility. The inward-facing structure of PfMATE in combination with the outward-facing one supports an alternating access mechanism for the MATE family transporters.

A thermostable chitinase from the antagonistic Chromobacterium violaceum that inhibits the development of phytopathogenic fungi

The biocontrol activity of some soil strains of Chromobacterium sp. against pathogenic fungi has been attributed to secreted chitinases. The aim of this work was to characterize biochemically a recombinant chitinase (CvChi47) from C. violaceum ATCC 12472 and to investigate its effects on phytopathogenic fungi. CvChi47 is a modular enzyme with 450 amino acid residues, containing a type I signal peptide at the N-terminal region, followed by one catalytic domain belonging to family 18 of the glycoside hydrolases, and two type-3 chitin-binding domains at the C-terminal end. The recombinant enzyme was expressed in Escherichia coli as a His-tagged protein and purified to homogeneity. The native signal peptide of CvChi47 was used to direct its secretion into the culture medium, from where the recombinant product was purified by affinity chromatography on chitin and immobilized metal. The purified protein showed an apparent molecular mass of 46 kDa, as estimated by denaturing polyacrylamide gel electrophoresis, indicating the removal of the signal peptide. CvChi47 was a thermostable protein, retaining approximately 53.7% of its activity when heated at 100 °C for 1 h. The optimum hydrolytic activity was observed at 60 °C and pH 5. The recombinant chitinase inhibited the conidia germination of the phytopathogenic fungi Fusarium oxysporum and F. guttiforme, hence preventing mycelial growth. Furthermore, atomic force microscopy experiments revealed a pronounced morphological alteration of the cell surface of conidia incubated with CvChi47 in comparison to untreated cells. Taken together, these results show the potential of CvChi47 as a molecular tool to control plant diseases caused by these Fusarium species.

Biotechnology of extremely thermophilic archaea

Although the extremely thermophilic archaea (Topt ≥ 70°C) may be the most primitive extant forms of life, they have been studied to a limited extent relative to mesophilic microorganisms. Many of these organisms have unique biochemical and physiological characteristics with important biotechnological implications. These include methanogens that generate methane, fermentative anaerobes that produce hydrogen gas with high efficiency, and acidophiles that can mobilize base, precious and strategic metals from mineral ores. Extremely thermophilic archaea have also been a valuable source of thermoactive, thermostable biocatalysts, but their use as cellular systems has been limited because of the general lack of facile genetics tools. This situation has changed recently, however, thereby providing an important avenue for understanding their metabolic and physiological details and also opening up opportunities for metabolic engineering efforts. Along these lines, extremely thermophilic archaea have recently been engineered to produce a variety of alcohols and industrial chemicals, in some cases incorporating CO2 into the final product. There are barriers and challenges to these organisms reaching their full potential as industrial microorganisms but, if these can be overcome, a new dimension for biotechnology will be forthcoming that strategically exploits biology at high temperatures.

Conserved principles of transcriptional networks controlling metabolic flexibility in archaea

Gene regulation is intimately connected with metabolism, enabling the appropriate timing and tuning of biochemical pathways to substrate availability. In microorganisms, such as archaea and bacteria, transcription factors (TFs) often directly sense external cues such as nutrient substrates, metabolic intermediates, or redox status to regulate gene expression. Intense recent interest has characterized the functions of a large number of such regulatory TFs in archaea, which regulate a diverse array of unique archaeal metabolic capabilities. However, it remains unclear how the co-ordinated activity of the interconnected metabolic and transcription networks produces the dynamic flexibility so frequently observed in archaeal cells as they respond to energy limitation and intermittent substrate availability. In this review, we communicate the current state of the art regarding these archaeal networks and their dynamic properties. We compare the topology of these archaeal networks to those known for bacteria to highlight conserved and unique aspects. We present a new computational model for an exemplar archaeal network, aiming to lay the groundwork toward understanding general principles that unify the dynamic function of integrated metabolic-transcription networks across archaea and bacteria.

Cytoplasmic and membrane-bound hydrogenases from Pyrococcus furiosus

Hydrogenases catalyze the simplest of chemical reactions, the reversible interconversion of protons, electrons, and hydrogen gas. These enzymes have potential to be utilized for several biotechnological applications, such as in vitro hydrogen production from renewable materials and in enzyme-based fuel cells for electricity generation. Based on the metal content of their catalytic sites, hydrogenases are classified as either [NiFe], [FeFe], or mononuclear Fe enzymes, and [NiFe] hydrogenases are further categorized into five groups based on the sequences of the catalytic subunits. This chapter describes recombinant engineering strategies, purification procedures, and catalytic properties of two distinct types of [NiFe] hydrogenase from Pyrococcus furiosus, a microorganism with an optimal growth temperature of 100°C. These enzymes are termed soluble hydrogenase I (SHI, group 3) and membrane-bound hydrogenase (MBH, group 4). The two hydrogenases were affinity-tagged to facilitate their purification and the purified enzymes have been used for biochemical, mechanistic, and structural analyses. The results have provided us with new insights into how catalysis by SHI is achieved, which could also lead to the development of catalysts for economic hydrogen production, and knowledge of how MBH couples hydrogen gas production to conservation of energy in the form of an ion gradient. The methods described in this chapter provide the basis for these studies.

Combined transcriptomics-metabolomics profiling of the heat shock response in the hyperthermophilic archaeon Pyrococcus furiosus

Pyrococcus furiosus is a remarkable archaeon able to grow at temperatures around 100 °C. To gain insight into how this model hyperthermophile copes with heat stress, we compared transcriptomic and metabolomic data of cells subjected to a temperature shift from 90 °C to 97 °C. In this study, we used RNA-sequencing to characterize the global variation in gene expression levels, while nuclear magnetic resonance (NMR) and targeted ion exchange liquid chromatography-mass spectrometry (LC-MS) were used to determine changes in metabolite levels. Of the 552 differentially expressed genes in response to heat shock conditions, 257 were upregulated and 295 were downregulated. In particular, there was a significant downregulation of genes for synthesis and transport of amino acids. At the metabolite level, 37 compounds were quantified. The level of di-myo-inositol phosphate, a canonical heat stress solute among marine hyperthermophiles, increased considerably (5.4-fold) at elevated temperature. Also, the levels of mannosylglycerate, UDP-N-acetylglucosamine (UDPGlcNac) and UDP-N-acetylgalactosamine were enhanced. The increase in the pool of UDPGlcNac was concurrent with an increase in the transcript levels of the respective biosynthetic genes. This work provides the first metabolomic analysis of the heat shock response of a hyperthermophile.

Characterization of membrane-bound sulfane reductase: A missing link in the evolution of modern day respiratory complexes

Hyperthermophilic archaea contain a hydrogen gas-evolving,respiratory membrane-bound NiFe-hydrogenase (MBH) that is very closely related to the aerobic respiratory complex I. During growth on elemental sulfur (S°), these microorganisms also produce a homologous membrane-bound complex (MBX), which generates H₂S. MBX evolutionarily links MBH to complex I, but its catalytic function is unknown. Herein, we show that MBX reduces the sulfane sulfur of polysulfides by using ferredoxin (Fd) as the electron donor, and we rename it membrane-bound sulfane reductase (MBS). Two forms of affinity-tagged MBS were purified from genetically engineered Pyrococcus furiosus (a hyperthermophilic archaea species): the 13-subunit holoenzyme (S-MBS) and a cytoplasmic 4-subunit catalytic subcomplex (C-MBS). S-MBS and C-MBS reduced dimethyl trisulfide (DMTS) with comparable K_m (∼490 μm) and V _max values (12 μmol/min/mg). The MBS catalytic subunit (MbsL), but not that of complex I (NuoD), retains two of four NiFe-coordinating cysteine residues of MBH. However, these cysteine residues were not involved in MBS catalysis because a mutant P. furiosus strain (MbsLC85A/C385A) grew normally with S°. The products of the DMTS reduction and properties of polysulfides indicated that in the physiological reaction, MBS uses Fd (E _o' = -480 mV) to reduce sulfane sulfur (E _o' -260 mV) and cleave organic (RS _n R, n ≥ 3) and anionic polysulfides (S _n ^2-, n ≥ 4) but that it does not produce H₂S. Based on homology to MBH, MBS also creates an ion gradient for ATP synthesis. This work establishes the electrochemical reaction catalyzed by MBS that is intermediate in the evolution from proton- to quinone-reducing respiratory complexes.

Characterization of the ATPase FlaI of the motor complex of the Pyrococcus furiosus archaellum and its interactions between the ATP-binding protein FlaH

The archaellum, the rotating motility structure of archaea, is best studied in the crenarchaeon Sulfolobus acidocaldarius. To better understand how assembly and rotation of this structure is driven, two ATP-binding proteins, FlaI and FlaH of the motor complex of the archaellum of the euryarchaeon Pyrococcus furiosus, were overexpressed, purified and studied. Contrary to the FlaI ATPase of S. acidocaldarius, which only forms a hexamer after binding of nucleotides, FlaI of P. furiosus formed a hexamer in a nucleotide independent manner. In this hexamer only 2 of the ATP binding sites were available for binding of the fluorescent ATP-analog MANT-ATP, suggesting a twofold symmetry in the hexamer. P. furiosus FlaI showed a 250-fold higher ATPase activity than S. acidocaldarius FlaI. Interaction studies between the isolated N- and C-terminal domains of FlaI showed interactions between the N- and C-terminal domains and strong interactions between the N-terminal domains not previously observed for ATPases involved in archaellum assembly. These interactions played a role in oligomerization and activity, suggesting a conformational state of the hexamer not observed before. Further interaction studies show that the C-terminal domain of PfFlaI interacts with the nucleotide binding protein FlaH. This interaction stimulates the ATPase activity of FlaI optimally at a 1:1 stoichiometry, suggesting that hexameric PfFlaI interacts with hexameric PfFlaH. These data help to further understand the complex interactions that are required to energize the archaellar motor.

Validation of a Hypothesis: Colonization of Black Smokers by Hyperthermophilic Microorganisms

Newly erupted black smokers (hydrothermal vent chimneys) are sterile during their formation, but house hyperthermophilic microorganisms in substantial amounts in later stages. No direct experimental data exist by which mechanisms hyperthermophiles colonize newly erupted black smokers, but a scenario was proposed recently how this might happen. Here we combine high temperature light microscopy with electron microscopy to show that two hyperthermophilic Archaea, namely Pyrococcus furiosus and Methanocaldococcus villosus are able to adhere onto authentic black smoker material (BSM). We especially are able to directly observe the adhesion process via video recordings taken at high temperatures. These data validate the hypothesis that hyperthermophiles are transferred by serendipitous water currents to the outside of newly formed black smokers and react within seconds to the there prevailing high temperatures by very fast movements. They scan the surface of the hydrothermal chimneys via a much slower zigzag seek-movement and adhere via their flagella at a suitable place, building up biofilms.

Development of an Effective 6-Methylpurine Counterselection Marker for Genetic Manipulation in Thermococcus barophilus

A gene disruption system for Thermococcus barophilus was developed using simvastatin (HMG-CoA reductase encoding gene) for positive selection and 5-Fluoroorotic acid (5-FOA), a pyrF gene for negative selection. Multiple gene mutants were constructed with this system, which offers the possibility of complementation in trans, but produces many false positives (<80%). To significantly reduce the rate of false positives, we used another counterselective marker, 6-methylpurine (6-MP), a toxic analog of adenine developed in Thermococcus kodakarensis, consistently correlated with the TK0664 gene (encoding a hypoxanthine-guanine phosphoribosyl-transferase). We thus replaced pyrF by TK0664 on our suicide vector and tested T. barophilus strain sensitivity to 6-MP before and after transformation. Wild-Type (WT) T. barophilus is less sensitive to 6-MP than WT T. kodakarensis, and an increase of cell resistance was achieved after deletion of the T. barophilusTERMP_00517 gene homologous to T. kodakarensisTK0664. Results confirmed the natural resistance of T. barophilus to 6-MP and show that TK0664 can confer sensitivity. This new counterselection system vastly improves genetic manipulations in T. barophilus MP, with a strong decrease in false positives to <15%. Using this genetic tool, we have started to investigate the functions of several genes involved in genomic maintenance (e.g., polB and rnhB).

Dynamic structure mediates halophilic adaptation of a DNA polymerase from the deep-sea brines of the Red Sea

The deep-sea brines of the Red Sea are remote and unexplored environments characterized by high temperatures, anoxic water, and elevated concentrations of salt and heavy metals. This environment provides a rare system to study the interplay between halophilic and thermophilic adaptation in biologic macromolecules. The present article reports the first DNA polymerase with halophilic and thermophilic features. Biochemical and structural analysis by Raman and circular dichroism spectroscopy showed that the charge distribution on the protein’s surface mediates the structural balance between stability for thermal adaptation and flexibility for counteracting the salt-induced rigid and nonfunctional hydrophobic packing. Salt bridge interactions via increased negative and positive charges contribute to structural stability. Salt tolerance, conversely, is mediated by a dynamic structure that becomes more fixed and functional with increasing salt concentration. We propose that repulsive forces among excess negative charges, in addition to a high percentage of negatively charged random coils, mediate this structural dynamism. This knowledge enabled us to engineer a halophilic version of Thermococcus kodakarensis DNA polymerase.—Takahashi, M., Takahashi, E., Joudeh, L. I., Marini, M., Das, G., Elshenawy, M. M., Akal, A., Sakashita, K., Alam, I., Tehseen, M., Sobhy, M. A., Stingl, U., Merzaban, J. S., Di Fabrizio, E., Hamdan, S. M. Dynamic structure mediates halophilic adaptation of a DNA polymerase from the deep-sea brines of the Red Sea.

Impact of growth mode, phase, and rate on the metabolic state of the extremely thermophilic archaeon Pyrococcus furiosus

The archaeon Pyrococcus furiosus is emerging as a metabolic engineering platform for production of fuels and chemicals, such that more must be known about this organism's characteristics in bioprocessing contexts. Its ability to grow at temperatures from 70 to greater than 100°C and thereby avoid contamination, offers the opportunity for long duration, continuous bioprocesses as an alternative to batch systems. Toward that end, we analyzed the transcriptome of P. furiosus to reveal its metabolic state during different growth modes that are relevant to bioprocessing. As cells progressed from exponential to stationary phase in batch cultures, genes involved in biosynthetic pathways important to replacing diminishing supplies of key nutrients and genes responsible for the onset of stress responses were up-regulated. In contrast, during continuous culture, the progression to higher dilution rates down-regulated many biosynthetic processes as nutrient supplies were increased. Most interesting was the contrast between batch exponential phase and continuous culture at comparable growth rates (∼0.4 hr^-1 ), where over 200 genes were differentially transcribed, indicating among other things, N-limitation in the chemostat and the onset of oxidative stress. The results here suggest that cellular processes involved in carbon and electron flux in P. furiosus were significantly impacted by growth mode, phase and rate, factors that need to be taken into account when developing successful metabolic engineering strategies.

Structural basis for dolichylphosphate mannose biosynthesis

Protein glycosylation is a critical protein modification. In biogenic membranes of eukaryotes and archaea, these reactions require activated mannose in the form of the lipid conjugate dolichylphosphate mannose (Dol-P-Man). The membrane protein dolichylphosphate mannose synthase (DPMS) catalyzes the reaction whereby mannose is transferred from GDP-mannose to the dolichol carrier Dol-P, to yield Dol-P-Man. Failure to produce or utilize Dol-P-Man compromises organism viability, and in humans, several mutations in the human dpm1 gene lead to congenital disorders of glycosylation (CDG). Here, we report three high-resolution crystal structures of archaeal DPMS from Pyrococcus furiosus, in complex with nucleotide, donor, and glycolipid product. The structures offer snapshots along the catalytic cycle, and reveal how lipid binding couples to movements of interface helices, metal binding, and acceptor loop dynamics to control critical events leading to Dol-P-Man synthesis. The structures also rationalize the loss of dolichylphosphate mannose synthase function in dpm1-associated CDG.

The generation of glycolipid dolichylphosphate mannose (Dol-P-Man) is a critical step for protein glycosylation and GPI anchor synthesis. Here the authors report the structure of dolichylphosphate mannose synthase in complex with bound nucleotide and donor to provide insight into the mechanism of Dol-P-Man synthesis.

Biological iron-sulfur storage in a thioferrate-protein nanoparticle

Iron–sulfur clusters are ubiquitous in biology and function in electron transfer and catalysis. They are assembled from iron and cysteine sulfur on protein scaffolds. Iron is typically stored as iron oxyhydroxide, ferrihydrite, encapsulated in 12 nm shells of ferritin, which buffers cellular iron availability. Here we have characterized IssA, a protein that stores iron and sulfur as thioferrate, an inorganic anionic polymer previously unknown in biology. IssA forms nanoparticles reaching 300 nm in diameter and is the largest natural metalloprotein complex known. It is a member of a widely distributed protein family that includes nitrogenase maturation factors, NifB and NifX. IssA nanoparticles are visible by electron microscopy as electron-dense bodies in the cytoplasm. Purified nanoparticles appear to be generated from 20 nm units containing ∼6,400 Fe atoms and ∼170 IssA monomers. In support of roles in both iron–sulfur storage and cluster biosynthesis, IssA reconstitutes the [4Fe-4S] cluster in ferredoxin in vitro.

The biosynthesis of iron-sulfur clusters in anaerobic organisms has not been extensively investigated. Here, the authors identify and characterize a multi-subunit protein that stores iron and sulfur in thioferrate for the assembly of the clusters in Pyrococcus furiosus.

Gene regulation of two ferredoxin:NADP+ oxidoreductases by the redox-responsive regulator SurR in Thermococcus kodakarensis

The redox-responsive regulator SurR in the hyperthermophilic archaea Pyrococcus furiosus and Thermococcus kodakarensis binds to the SurR-binding consensus sequence (SBS) by responding to the presence of elemental sulfur. Here we constructed a surR gene disruption strain (DTS) in T. kodakarensis, and identified the genes that were under SurR control by comparing the transcriptomes of DTS and parent strains. Among these genes, transcript levels of ferredoxin:NADP⁺ oxidoreductases 1 and 2 (FNOR1 and FNOR2) genes displayed opposite responses to surR deletion, indicating that SurR repressed FNOR1 transcription while enhancing FNOR2 transcription. Each promoter region contains an SBS upstream (uSBS) and downstream (dSBS) of TATA. In addition to in vitro binding assays, we examined the roles of each SBS in vivo. In FNOR1, mutations in either one of the SBSs resulted in a complete loss of repression, indicating that the presence of both SBSs was essential for repression. In FNOR2, uSBS indeed functioned to enhance gene expression, whereas dSBS functioned in gene repression. SurR bound to uSBS2 of FNOR2 more efficiently than to dSBS2 in vitro, which may explain why SurR overall enhances FNOR2 transcription. Further analyses indicated the importance in the distance between uSBS and TATA for transcriptional activation in FNOR2.

Structure and in situ organisation of the Pyrococcus furiosus archaellum machinery

The archaellum is the macromolecular machinery that Archaea use for propulsion or surface adhesion, enabling them to proliferate and invade new territories. The molecular composition of the archaellum and of the motor that drives it appears to be entirely distinct from that of the functionally equivalent bacterial flagellum and flagellar motor. Yet, the structure of the archaellum machinery is scarcely known. Using combined modes of electron cryo-microscopy (cryoEM), we have solved the structure of the Pyrococcus furiosus archaellum filament at 4.2 Å resolution and visualise the architecture and organisation of its motor complex in situ. This allows us to build a structural model combining the archaellum and its motor complex, paving the way to a molecular understanding of archaeal swimming motion.

Identification of residues of the archaeal RNA-binding Nip7 proteins specific to environmental conditions

The understanding of biological and molecular mechanisms providing survival of cells under extreme temperatures and pressures will help to answer fundamental questions related to the origin of life and to design of biotechnologically important enzymes with new properties. Here, we analyze amino acid sequences of the Nip7 proteins from 35 archaeal species to identify positions containing mutations specific to the hydrostatic pressure and temperature of organism’s habitat. The number of such positions related to pressure change is much lower than related to temperature change. The results suggest that adaptation to temperature changes of the Nip7 protein cause more pronounced modifications in sequence and structure, than to the pressure changes. Structural analysis of residues at these positions demonstrated their involvement in salt-bridge formation, which may reflect the importance of protein structure stabilization by salt-bridges at extreme environmental conditions.

SurR is a master regulator of the primary electron flow pathways in the order Thermococcales

The sulfur response regulator, SurR, is among a handful of known redox-active transcriptional regulators. First characterized from the hyperthermophile Pyrococcus furiosus, it is unique to the archaeal order Thermococcales. P. furiosus has two modes of electron disposal. Hydrogen gas is produced when the organism is grown in the absence of elemental sulfur (S⁰ ) and H₂ S is produced when grown in its presence. Switching between these metabolic modes requires a rapid transcriptional response and this is orchestrated by SurR. We show here that deletion of SurR causes severely impaired growth in the absence of S⁰ since genes essential for H₂ metabolism are no longer activated. Conversely, a strain containing a constitutively active SurR variant displays a growth phenotype in the presence of S⁰ due to constitutive repression of S⁰ -responsive genes. During a metabolic shift initiated by addition of S⁰ to the growth medium, both strains demonstrate a de-regulation of genes involved in the SurR regulon, including hydrogenase and related S⁰ -responsive genes. These results demonstrate that SurR is a master regulator of electron flow within P. furiosus, likely affecting the pools of ferredoxin, NADPH and NADH, as well as influencing metabolic pathways and thiol/disulfide redox balance.

Reverse gyrase is essential for microbial growth at 95 °C

Reverse gyrase is an enzyme that induces positive supercoiling in closed circular DNA in vitro. It is unique to thermophilic organisms and found without exception in all microorganisms defined as hyperthermophiles, that is, those having optimal growth temperatures of 80 °C and above. Although its in vivo role has not been clearly defined, it has been implicated in stabilizing DNA at high temperatures. Whether or not it is absolutely required for growth at these high temperatures has yet to be fully determined. In a previous study with an organism that has an optimal growth temperature of 85 °C, it was shown that the enzyme is not a prerequisite for life at extreme temperatures as disruption of its gene did not result in a lethal phenotype at the supraoptimal growth temperature of 90 °C. Herein we show that the enzyme is absolutely required for microbial growth at 95 °C, which in this case is a suboptimal growth temperature. Deletion of the gene encoding the reverse gyrase of the model hyperthermophilic archaeon Pyrococcus furiosus, which has an optimal growth temperature of 100 °C, revealed that the gene is required for growth at 95 °C, as well as at 100 °C. The results suggest that a temperature threshold above 90 °C exists, wherein the activity of reverse gyrase is absolutely necessary to maintain a correct DNA twist for any organism growing at such temperature extremes.

Lipid sugar carriers at the extremes: The phosphodolichols Archaea use in N-glycosylation

N-glycosylation, a post-translational modification whereby glycans are covalently linked to select Asn residues of target proteins, occurs in all three domains of life. Across evolution, the N-linked glycans are initially assembled on phosphorylated cytoplasmically-oriented polyisoprenoids, with polyprenol (mainly C₅₅ undecaprenol) fulfilling this role in Bacteria and dolichol assuming this function in Eukarya and Archaea. The eukaryal and archaeal versions of dolichol can, however, be distinguished on the basis of their length, degree of saturation and by other traits. As is true for many facets of their biology, Archaea, best known in their capacity as extremophiles, present unique approaches for synthesizing phosphodolichols. At the same time, general insight into the assembly and processing of glycan-bearing phosphodolichols has come from studies of the archaeal enzymes responsible. In this review, these and other aspects of archaeal phosphodolichol biology are addressed.

Four Inserts within the Catalytic Domain Confer Extra Stability and Activity to Hyperthermostable Pyrolysin from Pyrococcus furiosus

Pyrolysin from the hyperthermophilic archaeon Pyrococcus furiosus is the prototype of the pyrolysin family of the subtilisin-like serine protease superfamily (subtilases). It contains four inserts (IS147, IS29, IS27, and IS8) of unknown function in the catalytic domain. We performed domain deletions and showed that three inserts are either essential (IS147 and IS27) or important (IS8) for efficient maturation of pyrolysin at high temperatures, whereas IS29 is dispensable. The large insert IS147 contains Ca3 and Ca4, two calcium-binding Dx[DN]xDG motifs that are conserved in many pyrolysin-like proteases. Mutagenesis revealed that the Ca3 site contributes to enzyme thermostability and the Ca4 site is necessary for pyrolysin to fold into a maturation-competent conformation. Mature insert-deletion variants were characterized and showed that IS29 and IS8 contribute to enzyme activity and stability, respectively. In the presence of NaCl, pyrolysin undergoes autocleavage at two sites: one within IS29 and the other in IS27 Disrupting the ion pairs in IS27 and IS8 induces autocleavage in the absence of salts. Interestingly, autocleavage products combine noncovalently to form an active, nicked enzyme that is resistant to SDS and urea denaturation. Additionally, a single mutation in IS29 increases resistance to salt-induced autocleavage and further increases enzyme thermostability. Our results suggest that these extra structural elements play a crucial role in adapting pyrolysin to hyperthermal environments.IMPORTANCE Pyrolysin-like proteases belong to the subtilase superfamily and are characterized by large inserts and long C-terminal extensions; however, the role of the inserts in enzyme function is unclear. Our results demonstrate that four inserts in the catalytic domain of hyperthermostable pyrolysin contribute to the folding, maturation, stability, and activity of the enzyme at high temperatures. The modification of extra structural elements in pyrolysin-like proteases is a promising strategy for modulating global structure stability and enzymatic activity of this class of protease.

'Pyrococcus furiosus, 30 years on'

Pyrococcus furiosus has come of age. In 1986 the first publication on a remarkable microorganism, Pyrococcus furiosus, appeared. Now, 30 years later it is still “the fast and the furious“.

Physiological, metabolic and biotechnological features of extremely thermophilic microorganisms

The current upper thermal limit for life as we know it is approximately 120°C. Microorganisms that grow optimally at temperatures of 75°C and above are usually referred to as 'extreme thermophiles' and include both bacteria and archaea. For over a century, there has been great scientific curiosity in the basic tenets that support life in thermal biotopes on earth and potentially on other solar bodies. Extreme thermophiles can be aerobes, anaerobes, autotrophs, heterotrophs, or chemolithotrophs, and are found in diverse environments including shallow marine fissures, deep sea hydrothermal vents, terrestrial hot springs-basically, anywhere there is hot water. Initial efforts to study extreme thermophiles faced challenges with their isolation from difficult to access locales, problems with their cultivation in laboratories, and lack of molecular tools. Fortunately, because of their relatively small genomes, many extreme thermophiles were among the first organisms to be sequenced, thereby opening up the application of systems biology-based methods to probe their unique physiological, metabolic and biotechnological features. The bacterial genera Caldicellulosiruptor, Thermotoga and Thermus, and the archaea belonging to the orders Thermococcales and Sulfolobales, are among the most studied extreme thermophiles to date. The recent emergence of genetic tools for many of these organisms provides the opportunity to move beyond basic discovery and manipulation to biotechnologically relevant applications of metabolic engineering. WIREs Syst Biol Med 2017, 9:e1377. doi: 10.1002/wsbm.1377 For further resources related to this article, please visit the WIREs website.

Ethanol production by the hyperthermophilic archaeon Pyrococcus furiosus by expression of bacterial bifunctional alcohol dehydrogenases

Ethanol is an important target for the renewable production of liquid transportation fuels. It can be produced biologically from pyruvate, via pyruvate decarboxylase, or from acetyl‐CoA, by alcohol dehydrogenase E (AdhE). Thermophilic bacteria utilize AdhE, which is a bifunctional enzyme that contains both acetaldehyde dehydrogenase and alcohol dehydrogenase activities. Many of these organisms also contain a separate alcohol dehydrogenase (AdhA) that generates ethanol from acetaldehyde, although the role of AdhA in ethanol production is typically not clear. As acetyl‐CoA is a key central metabolite that can be generated from a wide range of substrates, AdhE can serve as a single gene fuel module to produce ethanol through primary metabolic pathways. The focus here is on the hyperthermophilic archaeon Pyrococcus furiosus, which grows by fermenting sugar to acetate, CO₂ and H₂. Previously, by the heterologous expression of adhA from a thermophilic bacterium, P. furiosus was shown to produce ethanol by a novel mechanism from acetate, mediated by AdhA and the native enzyme aldehyde oxidoreductase (AOR). In this study, the AOR gene was deleted from P. furiosus to evaluate ethanol production directly from acetyl‐CoA by heterologous expression of the adhE gene from eight thermophilic bacteria. Only AdhEs from two Thermoanaerobacter strains showed significant activity in cell‐free extracts of recombinant P. furiosus and supported ethanol production in vivo. In the AOR deletion background, the highest amount of ethanol (estimated 61% theoretical yield) was produced when adhE and adhA from Thermoanaerobacter were co‐expressed.

Genomic reconstruction of multiple lineages of uncultured benthic archaea suggests distinct biogeochemical roles and ecological niches

Genomic bins belonging to multiple archaeal lineages were recovered from distinct redox regimes in sediments of the White Oak River estuary. The reconstructed archaeal genomes were identified as belonging to the rice cluster subgroups III and V (RC-III, RC-V), the Marine Benthic Group D (MBG-D), and a newly described archaeal class, the Theionarchaea. The metabolic capabilities of these uncultured archaea were inferred and indicated a common capability for extracellular protein degradation, supplemented by other pathways. The multiple genomic bins within the MBG-D archaea shared a nearly complete reductive acetyl-CoA pathway suggesting acetogenic capabilities. In contrast, the RC-III metabolism appeared centered on the degradation of detrital proteins and production of H₂, whereas the RC-V archaea lacked capabilities for protein degradation and uptake, and appeared to be specialized on carbohydrate fermentation. The Theionarchaea appeared as complex metabolic hybrids; encoding a complete tricarboxylic acid cycle permitting carbon (acetyl-CoA) oxidation, together with a complete reductive acetyl-CoA pathway and sulfur reduction by a sulfhydrogenase. The differentiated inferred capabilities of these uncultured archaeal lineages indicated lineage-specific linkages with the nitrogen, carbon and sulfur cycles. The predicted metabolisms of these archaea suggest preferences for distinct geochemical niches within the estuarine sedimentary environment.