A simple electroanalytical methodology for the simultaneous determination of dopamine, serotonin and ascorbic acid using an unmodified edge plane pyrolytic graphite electrode

In situ detection of dopamine using nitrogen incorporated diamond nanowire electrode

Significant difference was observed for the simultaneous detection of dopamine (DA), ascorbic acid (AA), and uric acid (UA) mixture using nitrogen incorporated diamond nanowire (DNW) film electrodes grown by microwave plasma enhanced chemical vapor deposition. For the simultaneous sensing of ternary mixtures of DA, AA, and UA, well-separated voltammetric peaks are obtained using DNW film electrodes in differential pulse voltammetry (DPV) measurements. Remarkable signals in cyclic voltammetry responses to DA, AA and UA (three well defined voltammetric peaks at potentials around 235, 30, 367 mV for DA, AA and UA respectively) and prominent enhancement of the voltammetric sensitivity are observed at the DNW electrodes. In comparison to the DPV results of graphite, glassy carbon and boron doped diamond electrodes, the high electrochemical potential difference is achieved via the use of the DNW film electrodes which is essential for distinguishing the aforementioned analytes. The enhancement in EC properties is accounted for by increase in sp(2) content, new C-N bonds at the diamond grains, and increase in the electrical conductivity at the grain boundary, as revealed by X-ray photoelectron spectroscopy and near edge X-ray absorption fine structure measurements. Consequently, the DNW film electrodes provide a clear and efficient way for the selective detection of DA in the presence of AA and UA.

A direct comparison of nanosilver particles and nanosilver plates for the oxidation of ascorbic acid

We study of spherical silver nanoparticles of different size and Ag nanoplates were grown at zinc tin oxide (ZTO) surface and characterized using SEM. The application of different electrodes in voltammetry for determination ascorbic acid indicated that oxidation of this biomolecule occurs at these electrodes in diffusion controlled process. Ag nanoplates modified zinc tin oxide electrodes exhibit at least two to three times higher current than spherical nanosilver particles. The observed behavior suggests that Ag nanoplates exhibit higher electrocatalytic activity than spherical silver nanoparticles. The reason for such behavior may be due to lattice plane as well as due to more available surface edges. As dimensions of nanoplates are increased surface area in the case of nanoplates also appears to play a significant role.

Real-time stochastic detection of multiple neurotransmitters with a protein nanopore

The detection of several different neurotransmitters with the same sensor in real-time would be a powerful asset to the field of neurochemistry. We have developed a detector for a broad range of neurotransmitters including amino acids, catecholamines, and nucleotides, which relies on the reversible binding of the analytes to a copper(II) complex within an engineered protein nanopore.

Electrocatalytic detection of dopamine in the presence of ascorbic acid and uric acid using single-walled carbon nanotubes modified electrode

Single-walled carbon nanotubes (SWCNTs) fabricated by sodium dodecyl sulfate (SDS) (f-SWCNTs) modified glassy carbon electrodes (f-SWCNTs/GCE) for the simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The f-SWCNTs/GCE displayed very good electrochemical catalytic activities with respect to GCE. The oxidation over-potentials of DA and UA decreased dramatically, and their oxidation peak currents increased significantly at f-SWCNTs/GCE compared to those obtained at the bare GCE. Simultaneously, the oxidation peak currents of AA decreased accordingly. The f-SWCNTs/GCE not only divide the overlapping voltammetric responses of them into individual voltammetric peaks, but also totally eliminate the interference from AA and distinguish DA from UA. The catalytic peak currents obtained from square-wave voltammetry increased linearly with increasing DA concentrations in the range of 5.0×10(-6) to 1.0×10(-4)M with a detection limit of 2.0×10(-8)M (S/N=3). The method was also successfully applied for determination of DA and showed good recovery in some biological fluids.

CVD graphene electrochemistry: biologically relevant molecules

We investigate the electrochemical properties of CVD grown graphene towards the detection of various biologically prevalent analytes including l-ascorbic acid (AA), dopamine hydrochloride (DA), β-nicotinamide adenine dinucleotide (NADH), uric acid (UA) and epinephrine (EP). We find that the observed electrochemical response of the CVD-graphene towards these select analytes does not originate from the graphene, however, from various other contributions including the presence of 'graphitic islands' on the surface of the CVD-graphene which dominate its electrochemistry. In the systems studied within, it appears at best, CVD-graphene acts akin to that of an edge plane pyrolytic graphite (EPPG) electrode constructed from highly ordered pyrolytic graphite. However, in other cases, the response of the CVD-graphene is worse than that of an EPPG electrode, which is likely due to the low O/C ratio.

Single-Walled-Carbon-Nanotube-Modified Pyrolytic Graphite Electrode Used as a Simple Sensor for the Determination of Salbutamol in Urine

A fast and sensitive voltammetric method has been proposed for the determination of salbutamol at single-walled-carbon-nanotube-modified edge-plane pyrolytic graphite electrode (SWNT/EPPGE) in human urine. The electrochemical response of salbutamol was determined by square wave voltammetry (SWV) in phosphate buffer solution (PBS) at physiological pH 7.2. The modified electrode showed improved voltammetric response towards the oxidation of salbutamol, and a well-defined anodic peak was observed at~600 mV with enhanced peak current in comparison to the bare electrode. Linear calibration plot using SWNT/EPPGE was obtained in the concentration range of 50 to 2500 ngml-1with sensitivity and detection limit of 2.15 nA/ngml-1and 4.31 ngml-1, respectively. The developed method has been successfully applied for the determination of salbutamol in commercial preparations and human body fluids. Fast analysis of salbutamol in human urine makes the proposed method of great interest for doping control purposes at the site of competitive games.

Review of recent advances in analytical techniques for the determination of neurotransmitters

Methods and advances for monitoring neurotransmitters in vivo or for tissue analysis of neurotransmitters over the last five years are reviewed. The review is organized primarily by neurotransmitter type. Transmitter and related compounds may be monitored by either in vivo sampling coupled to analytical methods or implanted sensors. Sampling is primarily performed using microdialysis, but low-flow push-pull perfusion may offer advantages of spatial resolution while minimizing the tissue disruption associated with higher flow rates. Analytical techniques coupled to these sampling methods include liquid chromatography, capillary electrophoresis, enzyme assays, sensors, and mass spectrometry. Methods for the detection of amino acid, monoamine, neuropeptide, acetylcholine, nucleoside, and soluble gas neurotransmitters have been developed and improved upon. Advances in the speed and sensitivity of these methods have enabled improvements in temporal resolution and increased the number of compounds detectable. Similar advances have enabled improved detection at tissue samples, with a substantial emphasis on single cell and other small samples. Sensors provide excellent temporal and spatial resolution for in vivo monitoring. Advances in application to catecholamines, indoleamines, and amino acids have been prominent. Improvements in stability, sensitivity, and selectivity of the sensors have been of paramount interest.

Simultaneous Chronoamperometric Sensing of Ascorbic Acid and Acetaminophen at a Boron-Doped Diamond Electrode

Cyclic voltammetry (CV) and chronoamperometry (CA) have been used to sense and determine simultaneously L-ascorbic acid (AA) and acetaminophen (AC) at a boron-doped diamond electrode (BDDE) in a Britton-Robinson buffer solution. The calibration plots of anodic current peak versus concentration obtained from CV and CA data for both investigated compounds in single and di-component solutions over the concentration range 0.01 mM – 0.1 mM proved to be linear, with very good correlation parameters. Sensitivity values and RSD of 2-3% were obtained for various situations, involving both individual and simultaneous presence of AA and AC. The chronoamperometric technique associated with standard addition in sequential one step and/or two successive and continuous chronoamperograms at two characteristic potential levels represented a feasible option for the simultaneous determination of AA and AC in real sample systems such as pharmaceutical formulations. The average values indicated by the supplier were confirmed to a very close approximation from chronoamperomgrams by using several additions with the application of suitable current correction factors.