The role of fluoride in the preventive management of dentin hypersensitivity and root caries

Comparative evaluation of neodymium-doped yttrium aluminum garnet laser with nanocrystalline hydroxyapatite dentifrices and herbal dentifrices in the treatment of dentinal hypersensitivity

Background

The aim of this study was to compare and evaluate the efficacy of neodymium-doped yttrium aluminum garnet laser with and without herbal and nanohydroxyapatite dentifrices in management of dentinal hypersensitivity (DH).

Materials and Methods

A total of 180 patients who responded to air-blast test and cold-water test using verbal rating scale (VRS) were included in this study. The patients were randomly assigned to six groups (n = 30): control group (CG), scaling and root planning (SRP) + nanocrystalline hydroxyapatite dentifrices, SRP + nanocrystalline hydroxyapatite dentifrices + laser, SRP + herbal dentifrices, SRP + herbal dentifrices + laser, and SRP + laser. Each group was evaluated at baseline, 1 week, 1 month, and 6 months. In every visit of each patient, their clinical examination was done.

Results

Among all groups', repeated ANOVA measures and Kruskal-Wallis test was performed in which laser groups showed maximum reduction in DH in all indices while the CG showed minimum reduction in DH. The VRS values showed maximum reduction in SRP + nanocrystalline hydroxyapatite dentifrices + laser group with mean of 0.3 ± 0.5 and minimum reduction in CG with mean of 3.0 ± 0.5 (P < 0.001).

Conclusion

Among all the groups, SRP + Nanocrystalline hydroxyapatite + Laser can be an effective treatment modality for DH.

Biomimetic regulation of dentine remineralization by amino acid in vitro

OBJECTIVE

The aim of this study was to evaluate the effect of conditioning solutions containing DL-aspartic amino (Asp) on dentine remineralization induced by bioactive glass 45S5 (BAG) in a simulated oral environment.

METHODS

Sixty dentine discs from human third molars were used. Dentine specimens were treated with ethylene diamine tetraacetic acid (EDTA) to create a partially demineralization model and randomly divided to 4 groups: Artificial saliva (AS) group, Asp group (pretreated with Asp and remineralized with distilled water), BAG group (pretreated with distilled water and remineralized by BAG), Asp-BAG group (pretreated with Asp and remineralized by BAG). Each samples were measured at various time points, and at the end of the experiment, 6% citric acid challenge were taken. The remineralization characteristics were analyzed by using the spectroscopic data from attenuated total reflectance spectroscopy (ATR-IR) and Raman spectroscopy. The micro-morphology and structure were characterized by scanning electron microscopy (SEM) and X-ray diffraction (XRD). Dentine permeability was measured before and after each treatment to evaluate the resistance of remineralized layer to acid and simulated oral environment.

RESULTS

Both BAG and Asp-BAG groups significantly reduced dentine permeability and formed enamel-like apatite layers on dentine surface. For the mineralization of BAG, Asp showed inhibition effect. The 7-day mineral matrix area ratio in BAG group (12.54±2.29) was lower than the value in the Asp-BAG group (17.77±2.27) (p<0.05) and the Raman intensity (RI%) in Asp-BAG Group (1.49±0.26) was also significantly higher than that of BAG group (1.34±0.14) (p<0.05). According to permeability test, the apatite layer in BAG group and Asp-BAG group effectively occluded the dentinal tubules (p<0.05) and had certain acidic resistance (p>0.05). Furthermore, adsorbed acidic amino acid on hydroxyapatite (HAP) altered the crystal to increase into a larger size in diameter during crystal growth.

SIGNIFICANCE

The study demonstrated that a superior remineralization efficacy of BAG with Asp pretreatment on dentine.

Dental hypomineralization treatment: A systematic review

INTRODUCTION

Defects in the maturation stage of amelogenesis result in a normal volume of enamel but insufficient mineralization, called hypomineralization. Molar-incisor hypomineralization (MIH), amelogenesis imperfecta and dental fluorosis (DF) are examples of such defects.

OBJECTIVE

To evaluate the effectiveness of the treatments applied to the different forms of dental hypomineralization.

MATERIALS AND METHODS

PubMed, Scopus, Cochrane Library, Web of Science, and Embase were screened. The research was limited to studies published in English, Spanish, and Portuguese, until May 30, 2018. The research question was formulated following the Population, Intervention, Comparison, Outcome strategy. The quality of the methodology of each article was evaluated employing the Cochrane Handbook for Systematic Reviews.

RESULTS

From the initial research, 7895 references were obtained, of which 33 were included in the systematic review. The following treatments were reported: desensitizing and remineralizing products, resin infiltration, restorations, fissure sealants, tooth bleaching, enamel microabrasion and calcium, and vitamins supplements.

CONCLUSIONS

Although the results are suggestive, there is a clear need for a greater uniformity of the methodologies, thus allowing for the development of clinical guidelines. Nevertheless, it was possible to identify several effective treatments for teeth with MIH (arginine pastes or fluoride varnishes) and DF (tooth bleaching and/or enamel microabrasion).

CLINICAL SIGNIFICANCE

Because MIH, amelogenesis imperfecta, and DF are commonly seen in dental daily practice, it is extremely important to analyze the literature regarding its treatment.

Clinical Efficacy in Relieving Dentin Hypersensitivity of Nanohydroxyapatite-containing Cream: A Randomized Controlled Trial

OBJECTIVE

The study aimed to investigate the effectiveness of Apadent Pro (Sangi) Nanohydroxyapatite (nHAP) dental cream to relieve Dentin Hypersensitivity (DHS), compared with a positive control cream containing 20% pure silica (Silica).

METHODS

In this double-blind, randomized, parallel-group clinical trial, patients diagnosed with DHS and qualified to participate were randomized into two groups, nHAP (n=25) and Silica (n=26). Subjects' baseline and posttreatment sensitivity were assessed using two pain scales, a four-point Dental Pain Scale (DPS) followed by a linear Visual Analog Scale (VAS), after the application of ice-cold and air stimuli. Subjects used custom-fabricated trays to apply their respective cream for 5 minutes once daily following brushing with standard fluoride toothpaste. Posttreatment sensitivity (efficacy) was assessed every 2 weeks for 8 weeks. Mean treatment outcomes (percentage change from baseline) at each time point were compared using the Tukey HSD test for multiplicity (P<0.05).

RESULTS

With either air or cold stimulus, VAS and DPS indicated a significant (P<0.001) reduction in DHS at each time point with either nHAP or Silica. Comparing pain scales, VAS showed no significant difference in DHS reduction between the products with either air or cold. However, with DPS, DHS reduction was significantly (P<0.05) better with Silica than with nHAP at all time points with cold, and at 2, 4, and 8 weeks with air.

CONCLUSION

Both Apadent Pro nHAP and Silica dental creams are effective at promoting the relief of DHS symptoms. When comparing the efficacy of the two compounds to relieve DHS, results of the two pain scales were conflicting.

Effect of low-level laser therapy combined with 5000 parts per million fluoride dentifrice on postbleaching sensitivity: A clinical, randomized, and double-blind study

OBJECTIVE

The aim of this double-blind, randomized, controlled clinical study was to assess the efficacy of low-level laser therapy (LLLT) combined with 5000 ppm fluoride dentifrice on postbleaching sensitivity in teeth exposed to 35% hydrogen peroxide for four weeks.

MATERIALS AND METHODS

Twenty-five volunteers were evaluated using the split-mouth model in which the right and left maxillary/mandibular quadrants were randomized and allocated to one of two groups: GPLACEBO, in which the laser tip was positioned without the emission of light (placebo effect) + 5000 ppm sodium fluoride, or GLASER, which comprised LLLT + 5000 ppm sodium fluoride. For both groups, LLLT and placebo were used before bleaching, whereas fluoride was applied after bleaching. LLLT was applied at two points: on the central cervical and medial regions of the incisors, canines, and premolars in the corresponding hemi-arch. At each point, 60 J/cm² was applied for 16 seconds with an irradiance of 3.75 W/cm² using the therapeutic infrared device. To assess tooth sensitivity, a modified visual analogue scale was used after an evaporative stimulus, and a daily pain questionnaire was also applied.

RESULTS

The Wilcoxon and Friedman tests demonstrated a significant difference in the incidence of sensitivity pain between GPLACEBO and GLASER (P ≤ .05), with different evaluation times.

CONCLUSION

Teeth treated with laser therapy in combination with the topical use of sodium fluoride at each bleaching session demonstrated less sensitivity compared with the application of sodium fluoride only.

CLINICAL SIGNIFICANCE

The use of a low-level laser therapy in combination with topical use of sodium fluoride improves symptoms of dentin sensitivity at each bleaching session.

Assessment of oral health-related quality of life as a function of non-invasive treatment with high-fluoride toothpastes for root caries lesions in community-dwelling elderly

PURPOSE

Non-invasive treatment of root caries lesions (RCLs) may impact oral health-related quality of life (OHRQoL), but no evidence is available. The purpose of the study was to assess changes in OHRQoL among patients exposed to non-invasive treatment of RCLs with conventional or high-fluoride dentifrices.

METHODS

To be eligible, subjects had to be ≥60 years of age, independently living, with at least five teeth and one RCL. The 14-item Oral Health Impact Profile for adults in Spanish (OHIP-14Sp), oral examination and sociodemographic data were documented at the beginning of the study (T0). The presence and activity of RCLs were detected and diagnosed. Subjects were randomly assigned to either the control (1,450 ppm fluoride) or the experimental (5,000 ppm fluoride) treatment group. A new set of measurements was obtained at 12 months (T1). Mean comparisons were carried out using the Student's t-test for total OHIP-14Sp scores. To determine whether T1 OHRQoL scores were different regarding sex, age, educational level and socio-economic status, mean OHIP-14Sp scores were obtained and compared with those variables at 12 months.

RESULTS

An overall improvement in OHRQoL after the non-invasive treatment of RCLs was verified when T1 was compared with T0 (P < 0.0001). Regarding treatment type, no significant differences were detected between groups (P = 0.114). Subjects with higher income and more years of formal education had better OHRQoL than those with a lower salary (P < 0.0001) and with fewer years of education (P = 0.0006).

CONCLUSIONS

Non-invasive treatment for RCLs in community-dwelling elders appears to cause a positive impact on OHRQoL. Better OHRQoL was associated with higher socio-economic status and educational level. No significant differences were detected regarding the fluoride concentration in the dentifrices.

Effect of fluoride mouthrinse on adhesion to bovine root dentin

The purpose of this study was to evaluate the effect of fluoride mouthrinses on dentin bonding performance of a two-step selfetch adhesive; Clearfil SE Bond. Bovine root dentin surface was treated with either 450, 900, or 9,000 ppm F solutions for 30 s (immediate), and continually treated for one month (one month) before the bonding procedures. Microtensile bond strength (µTBS) test and scanning electron microscopic (SEM) observation of the acid-base resistance zone (ABRZ) were performed. Chemical state of fluorine on dentin surface was analyzed by X-ray absorption fine structure (XAFS). The 450 and 900 ppm F fluoride mouthrinses did not influence the µTBS to dentin, while the 9,000 ppm F fluoride solution adversely affected the µTBSs. The fluoride application to dentin significantly enhanced acid resistance at the adhesive/dentin interface including the ABRZ. The XAFS analysis indicated different concentrations of fluoride might create different chemical compounds on the dentin surface, influencing the µTBS results.

The effect of combining laser and nanohydroxy-apatite on the surface properties of enamel with initial defects

Background

The aim of this study was to evaluate the effect of combining fractional CO2 LASER and nanohydroxy apatite on surface microhardness and color of enamel with initial defects.

Material and Methods

Two types of nano hydroxylapatite (nHAP) was prepared; Pure hydroxyapatite (nHA) and Fluoro hydroxyapatite (nFHA), Sixty extracted premolar teeth without visible caries or structural defects on enamel surface were used, immersed in 10 ml of a demineralizing solution for 2 weeks to create artificial white spot lesions, they were randomly allocated into two groups; Group 1: nHA, Group 2: nFHA, each group is then subdivided into 2 subgroups (A and B) where two different in vitroremineralization procedures have been performed, the first procedure utilizes a 10 wt% nHA aqueous slurries only, the second was first exposed to irradiation from a fractional CO2 laser then (nHAP) was applied. Microhardness and color were measured using a micro-Vickers hardness tester and spectrophotometer respectively.

Results

Laser treated teeth in both groups showed the highest mean hardness and lowest color difference where ΔE was less than 3.3 units, in both tests the pure type of nanohydroxyapatite gave better results than the nanofluroapatite type.

Conclusions

Nano-hydroxyapatite has remarkable remineralizing effects on initial lesions of enamel, certainly higher when combined with laser application.

Key words:CO2 LASER, Enamel remineralization, Nanohydroxy apatite.

Effect of a filled adhesive as the desensitizer on bond strength of "Self-Adhesive Cements To" differently severity of fluorosed dentin

The objectives were to evaluate the efficacy of a filled adhesive named Prime & Bond NT (P&B NT) as the dentin desensitizer in occluding fluorosis dentinal tubules and compare the shear bond strength (SBS) of RelyX U200 self-adhesive resin cement (RXU) and RelyX Luting self-adhesive resin-modified glass ionomer cement (RMGIC) before and after P&B NT pretreatment. 176 non-carious fluorosis were classified into four subgroups by the Thylstrup and Fejerskov index (TFI): normal group (TFI = 0), mild group (TFI = 1-3), moderate group (TFI = 4-5), severe group (TFI = 6-9). 160 composite cylinders (4 × 5 mm) were fabricated, then every severity of fluorosed dentin was subjected to four treatments: P&B NT + RXU (n = 40), RXU (n = 40), P&B NT + RMGIC (n = 40), RMGIC (n = 40). The specimens were immersed in water at 37°C for 24 hr first and half of them underwent 5,000 thermocycling before shear bond strength test. A factorial design (factorial 4 × 2 × 2 × 2) was developed to make statistical analysis. Scanning electron microscope (SEM) analysis (n = 16) in cross section and longitudinal section view characterized the occlusion situation of dentinal tubules. P&B NT might occlude dentinal tubules as the dentin desensitizer for normal teeth and mild-moderate fluorosis. P&B NT significantly increased the SBS of RXU (p < .05) but had no statistical significance on the SBS of RMGIC (p > .05). RXU could benefit from P&B NT desensitization to achieve a better quality of adhesion.

Dentine Tubule Occlusion by Novel Bioactive Glass-Based Toothpastes

There are numerous over-the-counter (OTC) and professionally applied (in-office) products and techniques currently available for the treatment of dentine hypersensitivity (DH), but more recently, the use of bioactive glasses in toothpaste formulations have been advocated as a possible solution to managing DH. Aim. The aim of the present study, therefore, was to compare several bioactive glass formulations to investigate their effectiveness in an established in vitro model. Materials and Methods. A 45S5 glass was synthesized in the laboratory together with several other glass formulations: (1) a mixed glass (fluoride and chloride), (2) BioMinF, (3) a chloride glass, and (4) an amorphous chloride glass. The glass powders were formulated into five different toothpaste formulations. Dentine discs were sectioned from extracted human teeth and prepared for the investigation by removing the cutting debris (smear layer) following sectioning using a 6% citric acid solution for 2 minutes. Each disc was halved to provide test and control halves for comparison following the brushing of the five toothpaste formulations onto the test halves for each toothpaste group. Following the toothpaste application, the test discs were immersed in either artificial saliva or exposed to an acid challenge. Results. The dentine samples were analyzed using scanning electron microscopy (SEM), and observation of the SEM images indicated that there was good surface coverage following artificial saliva immersion. Furthermore, although the acid challenge removed the hydroxyapatite layer on the dentine surface for most of the samples, except for the amorphous chloride glass, there was evidence of tubular occlusion in the dentine tubules. Conclusions. The conclusions from the study would suggest that the inclusion of bioactive glass into a toothpaste formulation may be an effective approach to treat DH.

Effect of Erosion/Abrasion Challenge on the Dentin Tubule Occlusion Using Different Desensitizing Agents

The aim of the study was to evaluate dentinal tubule occlusion, measuring the dentin permeability (Lp) and using different desensitizing agents before and after abrasive/erosive challenge. Dentin discs from 42 healthy human third molars were obtained. Minimum Lp was measured after a smear layer simulation using #600 SiC paper and maximum Lp after an immersion in 0.5 M EDTA. The specimens were treated with different desensitizers: two varnishes (Clinpro XT Varnish-CV, Fluor Protector-FP), a paste (Desensibilize Nano P-NP) and a gel (Oxa Gel-OG). The Lp of each specimen was measured immediately after the desensitizers' application. The discs were subjected to erosion/abrasion cycles for 7 days, with 0.5% citric acid solution (6x/day) and tooth brushing (3x/day). Lp was measured after the first, fourth and seventh day of the challenge. The data were analyzed by 3-way ANOVA with repeated measurements and by a Games-Howell test (α=5%). FP and CV did not show significant differences in Lp immediately after application until the 7th day (p<0.05). OG showed a significant increase in Lp after the 4th and 7th days. NP resulted in a significantly higher permeability compared to the other materials immediately after the application and after the 1st day of challenge. All the desensitizers reduced the dentin permeability immediately after application. However, only the varnishes were able to maintain the occlusive effect after the erosion/abrasion challenge.

Dentinal tubule sealing effects of 532-nm diode-pumped solid-state laser, gallic acid/Fe3+ complex, and three commercial dentin desensitizers

The purpose of this study was to compare dentinal tubule sealing effects of a 532-nm diode-pumped solid-state (DPSS) laser, gallic acid/Fe³⁺ complex, and three commercially available dentin desensitizers. Human premolars (n = 44) extracted for orthodontics had standardized cervical cavities prepared, etched (37% phosphoric acid) and randomly assigned to either a control (n = 4), or one of five treatment groups (n = 8/group). Desensitizing treatments were either a 532-nm DPSS laser, gallic acid/Fe³⁺ complex, oxalate-based Super Seal™ (SS), DIO™ Enamel Coating Pen Pro Tooth (Dio), or adhesive-type Hybrid Coat™ (HC). Dentinal fluid flow (DFF) was monitored continuously in real time during the application of each desensitizing agent, by using a nanoliter-scaled fluid flow-measuring device. Following treatment, morphological changes on dentinal surfaces and within tubules were observed by scanning electron microscopy (SEM). DFF rates were significantly reduced after treatment in all experimental groups (P < 0.05), except SS (P > 0.05). The gallic acid/Fe³⁺ complex reduced DFF rates the most, and significantly (P < 0.05) more than the three commercial dentin desensitizers. There were no significant differences in DFF reduction rates between the gallic acid/Fe³⁺ complex and the DPSS laser groups (P > 0.05). There were no significant differences in DFF reduction rates among the three commercial dentin desensitizers (P > 0.05). SEM examination of treated dentin showed that the degree of occlusion of dentinal tubules correlated closely with the corresponding reduction in DFF rates. The gallic acid/Fe³⁺ complex and 532-nm DPSS laser were superior to other desensitizing methods in occluding dentinal tubules and reducing DFF rates.

Arrest of Root Carious Lesions via Sodium Fluoride, Chlorhexidine and Silver Diamine Fluoride In Vitro

OBJECTIVE

To compare the root carious lesion arrest of chlorhexidine (CHX) and silver diamine fluoride (SDF) varnishes and/or sodium fluoride rinses (NaF) in vitro.

BACKGROUND

Effective and easily applicable interventions for treating root carious lesions are needed, as these lesions are highly prevalent amongst elderly individuals.

METHODS

In 100 bovine dentin samples, artificial root carious lesions were induced using acetic acid and a continuous-culture Lactobacillus rhamnosus biofilm model. One quarter of each induced lesion was excavated and baseline dentinal bacterial counts assessed as Colony-Forming-Units (CFU) per mg. Samples were allocated to one of four treatments (n = 25/group): (1) untreated control; (2) 38% SDF or (3) 35% CHX varnish, each applied once, plus 500 ppm daily NaF rinse in the subsequent lesion progression phase; and (4) daily NaF rinses only. Samples were re-transferred to the biofilm model and submitted to a cariogenic challenge. After six days, another quarter of each lesion was used to assess bacterial counts and the remaining sample was used to assess integrated mineral loss (ΔZ) using microradiography.

RESULTS

ΔZ did not differ significantly between control (median (25th/75th percentiles): 9082 (7859/9782) vol % × µm), NaF (6704 (4507/9574) and SDF 7206 (5389/8082)) (p < 0.05/Kruskal-Wallis test). CHX significantly reduced ΔZ (3385 (2447/4496)) compared with all other groups (p < 0.05). Bacterial numbers did not differ significantly between control (1451 (875/2644) CFU/µg) and NaF (750 (260/1401)) (p > 0.05). SDF reduced bacterial counts (360 (136/1166)) significantly compared with control (p < 0.05). CHX reduced bacterial counts (190 (73/517)) significantly compared with NaF and control (p < 0.05).

CONCLUSION

CHX varnish plus regular NaF rinses arrested root carious lesions most successfully.

Surface roughness and bacterial adhesion on root dentin treated with diode laser and conventional desensitizing agents

The treatments for dentin hypersensitivity (DH) may change the surface roughness of the root dentin, which can lead to biofilm accumulation, increasing the risk of root caries. The aim was to compare the surface roughness of root dentin after different treatments of DH and the biofilm formation on those surfaces. After initial surface roughness (Sa) assessment, 50 bovine root fragments received the following treatments (n = 10): G 1-no treatment; G2-5% sodium fluoride varnish; G3-professional application of a desensitizing dentifrice; G4-toothbrushing with a desensitizing dentifrice; and G5-diode laser application (908 nm; 1.5 W, 20 s). The Sa was reevaluated after treatments. Afterward, all samples were incubated in a suspension of Streptococcus mutans at 37 °C for 24 h. The colony-forming units (CFU) were counted using a stereoscope, and the results were expressed in CFU/mL. The one-way ANOVA and the Tukey's tests compared the roughness data and the results obtained on the bacterial adhesion test (α = 5%). G2 (2.3 ± 1.67%) showed similar Sa variation than G1 (0.25 ± 0.41%) and G5 (5.69 ± 0.99%), but different from group G3 (9.05 ± 2.39%). Group 4 showed the highest Sa variation (30.02 ± 3.83%; p < 0.05). Bacterial adhesion was higher in G4 (2208 ± 211.9), suggesting that bacterial growth is greater on rougher surfaces. The diode laser and the conventional treatments for DH may change the surface roughness of the root dentin, but only brushing with desensitizing dentifrice induced a higher bacteria accumulation on root dentin surface.

Immediate Desensitization in Teeth Affected by Amelogenesis Imperfecta

The aim of this paper was to describe a clinical case of immediate dental desensitization using a self-etch adhesive system in an adolescent patient diagnosed with amelogenesis imperfecta (AI). AI was associated with severe tooth sensitivity, treated by the application of a universal adhesive system for desensitization of the teeth affected by AI. Reduction of tooth sensitivity was assessed using a visual analog scale during all reevaluations. The technique was effective for reducing tooth sensitivity. It was concluded that the adhesive system for tooth desensitization had an immediate effect and maintained its effectiveness during a 12-month follow-up period.

Exposed Dentin: Influence of Cleaning Procedures and Simulated Pulpal Pressure on Bond Strength of a Universal Adhesive System

Purpose

To compare various pre-treatments serving as cleaning procedures of dentin on the bond strength of resin composite promoted by a universal adhesive system applied either in the absence or presence of simulated pulpal pressure.

Materials and Methods

Prior to application of the adhesive system (Scotchbond Universal) and resin composite (Filtek Z250), ground dentin surfaces were given one of five pre-treatments either without or with simulated pulpal pressure: 1) no pre-treatment, adhesive system in “self-etch” mode, 2) phosphoric acid etching, adhesive system in “total-etch” mode, 3) polishing with pumice on prophylaxis cup, 4) air abrasion with AIR-FLOW PLUS powder, 5) air abrasion with AIR-FLOW PERIO powder; n = 20/group of pre-treatment. After storage (37°C, 100% humidity, 24 h), micro shear bond strength was measured and data analyzed with parametric ANOVA including Bonferroni-Holm correction for multiple testing followed by Student’s t tests (significance level: α = 0.05).

Results

The ANOVA found type of pre-treatment and simulated pulpal pressure to have no significant effect on dentin bond strength. The explorative post-hoc tests showed a negative effect of simulated pulpal pressure for phosphoric acid etching (adhesive system in “total-etch” mode; p = 0.020), but not for the other four pre-treatments (all p = 1.000).

Conclusion

Air abrasion with powders containing either erythritol and chlorhexidine (AIR-FLOW PLUS) or glycine (AIR-FLOW PERIO) yielded dentin bond strengths similar to no pre-treatment, phosphoric acid etching, or polishing with pumice. Simulated pulpal pressure reduced the bond strength only when the self-etch adhesive system was used in total-etch mode.

Effects of a Dicalcium and Tetracalcium Phosphate-Based Desensitizer on In Vitro Dentin Permeability

The present study evaluated the effectiveness of a dicalcium and tetracalcium phosphate-based desensitizer in reducing dentin permeability in vitro. Dentin fluid flow was measured before and after treatment of dentin with patent dentinal tubules using 1 or 3 applications of the dicalcium and tetracalcium phosphate containing agent TeethmateTM (TM) and comparing the results with two sodium fluoride varnishes VellaTM (VLA) and VanishTM (VAN), after storage in artificial saliva for 24 h, 48 h and 7 days. Significant differences were observed among the 4 methods employed for reducing dentin permeability (p < 0.001) and the 3 post-treatment times (p < 0.001). VLA and VAN never achieved 50% permeability reductions consistently in any of the 3 time periods. Only the calcium phosphate-based desensitizer applied for 3 times consistently reduced dentin permeability by 50% after 24 h. When applied once, the permeability reduction of TM increased progressively over the 3 time periods. After 7 days, only one and three applications of the calcium phosphate-based desensitizer consistently reduced dentin permeability by more than 50%. Permeability reductions corresponded well with scanning electron microscopy examination of dentinal tubule orifice occlusion in dentin specimens treated with the agents. Overall, the dicalcium and tetracalcium phosphate-based desensitizer is effective in reducing dentin permeability via a tubule occlusion mechanism. The ability of the agent to reduce dentin permeability renders it to be potentially useful as a clinical dentin desensitizing agent, which has to be confirmed in future clinical studies. By contrast, the two sodium fluoride varnishes are not effective in dentin permeability reduction and should be considered as topical fluoride delivering agents rather than tubular orifice-blocking agents.

Non-surgical management of tooth hypersensitivity

Tooth sensitivity is a common complaint of patients in dental practices. Studies have demonstrated dentinal hypersensitivity to affect 10-30% of the population. There are various potential causes of tooth sensitivity and a variety of available treatment options. This narrative review will discuss the possible aetiology of this condition, as well as the treatment modalities available. A tailor-made treatment plan that starts with the most non-invasive treatment options and escalates only when those options have proven insufficient in alleviating symptoms should be provided for each patient. Only after all non- and less-invasive methods have failed to reduce the symptoms should more invasive treatment options, such as root-coverage, be considered.

Abfraction lesions: etiology, diagnosis, and treatment options

Abfraction is a type of noncarious cervical lesion (NCCL) characterized by loss of tooth tissues with different clinical appearances. Evidence supports that abfraction lesions, as any NCCLs, have a multifactorial etiology. Particularly, the cervical wear of abfraction can occur as a result of normal and abnormal tooth function and may also be accompanied by pathological wear, such as abrasion and erosion. The interaction between chemical, biological, and behavioral factors is critical and helps to explain why some individuals exhibit more than one type of cervical wear mechanism than others. In an era of personalized dentistry, patient risk factors for NCCLs must be identified and addressed before any treatment is performed. Marked variations exist in dental practice concerning the diagnosis and management of these lesions. The lack of understanding about the prognosis of these lesions with or without intervention may be a major contributor to variations in dentists’ management decisions. This review focuses on the current knowledge and available treatment strategies for abfraction lesions. By recognizing that progressive changes in the cervical area of the tooth are part of a physiologically dynamic process that occurs with aging, premature and unnecessary intervention can be avoided. In cases of asymptomatic teeth, where tooth vitality and function are not compromised, abfraction lesions should be monitored for at least 6 months before any invasive procedure is planned. In cases of abfraction associated with gingival recession, a combined restorative-surgical approach may be performed. Restorative intervention and occlusal adjustment are not indicated as treatment options to prevent further tooth loss or progression of abfraction. The clinical decision to restore abfraction lesions may be based on the need to replace form and function or to relieve hypersensitivity of severely compromised teeth or for esthetic reasons.

The Effect of Calcium Sodium Phosphosilicate on Dentin Hypersensitivity: A Systematic Review and Meta-Analysis

OBJECTIVE

To investigate the effect of calcium sodium phosphosilicate (CSPS) in treating dentin hypersensitivity (DH) and to compare this effect to that of a negative (placebo) control.

MATERIALS AND METHODS

Several databases, including Medline, EMBASE, Web of Science, The Cochrane Library, and the Chinese Biomedical Literature Database, were searched to identify relevant articles published through January 2015; grey literature (i.e., academic literature that is not formally published) was also searched. Two authors performed data extraction independently and jointly using data collection forms. The primary outcome was the DH pain response to routine activities or to thermal, tactile, evaporative, or electrical stimuli, and the secondary outcome was the side effects of CSPS use. Each study was evaluated using the Cochrane Collaboration tool for assessing risk bias. Meta-analysis of studies with the same participant demographics, interventions, controls, assessment methods and follow-up periods was performed. The Grading of Recommendations Assessment Development and Evaluation System was used to assess the quality of the evidence and the risk of bias across studies.

RESULTS

Meta-analysis demonstrated that toothpaste containing 5% CSPS was more effective than the negative control at relieving dentin sensitivity, with the level of evidence classified as "moderate". In addition, prophylaxis paste containing 15% calcium sodium phosphosilicate was favored over the negative control at reducing post-periodontal therapy hypersensitivity, with the level of evidence categorized as "low". Only two studies reported side effects of CSPS use.

CONCLUSIONS

The majority of studies found that calcium sodium phosphosilicate was more effective than the negative control at alleviating DH. Because strong evidence is scarce, high-quality, well-designed clinical trials are required in the future before definitive recommendations can be made.

Effect of Nd:YAG Laser Irradiation on the Number of Open Dentinal Tubules and Their Diameter with and without Smear of Graphite: An in Vitro Study

INTRODUCTION

Dentin hypersensitivity (DH) is characterized by tooth pain arising from exposure of dental roots. In this study the efficiency of neodymium yttrium-aluminum-garnet (Nd:YAG) laser in association with graphite on dentinal surface changes as the alternative to the treatment of DH was evaluated.

METHODS

Sixteen noncarious human third molars were collected and sectioned into 5 parts from cementoenamel junction (CEJ) to the furcation area. The prepared samples were randomly assigned into five groups (Gs) of each 16: Control (G1), treated by Nd:YAG laser at 0.5 W (G2), irradiation of Nd:YAG with a 0.25 W output power(G3), smeared with graphite and then using Nd:YAG laser at output powers of 0.5 W (G4) and 0.25 W (G5). For all groups the parameters were 15 Hz, 60 s, at two stages and with a right angle irradiation. The number and diameter of dentinal tubules (DT) were compared and analyzed by SPSS software, One way ANOVA and Post hoc LSD tests.

RESULTS

The number of open dentinal tubules varied significantly between all groups except among G1 with G3 and G2 with G5. Multiple comparison tests also exhibited significant differences regarding the diameter of tubules between the groups two by two except among G2 with G5.

CONCLUSION

Nd:YAG laser used at 0.25 W and 0.5 W with application of graphite smear was able to reduce the number and diameter of dentinal tubules.

Structure-solubility relationships in fluoride-containing phosphate based bioactive glasses

Structural role of fluoride on chemical dissolution behavior of bioactive phosphate glasses has been studied.

A comparative evaluation of CO2 and erbium-doped yttrium aluminium garnet laser therapy in the management of dentin hypersensitivity and assessment of mineral content

PURPOSE

Dentin hypersensitivity is a potential threat to oral health. Laser irradiation may provide reliable and reproducible treatment but remains controversial. The present study aimed to evaluate the effects of CO2 or erbium-doped yttrium aluminium garnet (Er:YAG) laser therapy, and to assess mineral content.

METHODS

Eighteen human single-rooted teeth affected with advanced periodontitis were obtained. Buccal and lingual surfaces were planed to form 36 specimens. Ethylenediaminetetraacetic acid gel (24%) was applied to remove the smear layer and simulate hypersensitive teeth. The experimental groups were: group 1, control (no irradiation); group 2, CO2 laser (repetitive pulsed mode, 2 W, 2.7 J/cm(2)); and group 3, Er:YAG laser (slight contact mode, 40 mJ/pulse and 10 Hz). To evaluate dentinal tubule occlusion, six specimens per group (2-mm thickness) were prepared and observed using scanning electron microscopy (SEM) for calculation of the occlusion percentage. To evaluate the mineral content, six specimens per group (0.6-mm thickness) were used, and then the levels of Ca, K, Mg, Na, and P were measured by inductively coupled plasma-atomic emission spectrometry. In addition, the surface temperature of the specimens during laser irradiation was analyzed by a thermograph.

RESULTS

The SEM photomicrographs indicated melted areas around exposed dentinal tubules and a significantly greater percentage of tubular occlusion in the CO2 and Er:YAG laser groups than the control, and in the Er:YAG group than the CO2 laser group. In addition, no significant differences were noted among the experimental groups for the mineral elements analyzed. The CO2 laser group showed an evident thermal effect compared to the Er:YAG group.

CONCLUSIONS

CO2 and Er:YAG laser are effective in treating dentin hypersensitivity and reducing its symptoms. However, the Er:YAG laser has a more significant effect; thus, it may constitute a useful conditioning item. Furthermore, neither CO2 nor Er:YAG lasers affected the compositional structure of the mineral content.

Noninvasive and multidisciplinary approach to the functional and esthetic rehabilitation of amelogenesis imperfecta: a pediatric case report

Case Report. An 8-year-old girl with amelogenesis imperfecta (AI) reported unsatisfactory aesthetics, difficulty in mastication, and dental hypersensitivity. The intraoral examination observed mixed dentition, malocclusion in anteroposterior relationships, anterior open bite, and dental asymmetry. A hypoplastic form of AI was diagnosed in the permanent dentition. A multidisciplinary planning was performed and divided into preventive, orthopedic, and rehabilitation stages. Initially, preventive treatment was implemented, with fluoride varnish applications, in order to protect the fragile enamel and reduce the dental sensitivity. In the second stage, the patient received an interceptive orthopedic treatment to improve cross-relationship of the arches during six months. Finally, the rehabilitation treatment was executed to establish the vertical dimension. In the posterior teeth, indirect composite resin crowns were performed with minimally invasive dental preparation. Direct composite resin restorations were used to improve the appearance of anterior teeth. Follow-Up. The follow-up was carried out after 3, 6, 12, and 18 months. After 18 months of follow-up, The restoration of integrity, oral hygiene, and patient satisfaction were observed . Conclusion. Successful reduction of the dental hypersensitivity and improvement of the aesthetic and functional aspects as well as quality of life were observed.

Root caries: a periodontal perspective

BACKGROUND AND OBJECTIVE

A prevailing dental problem in the periodontal patient is root caries. Specifically, periodontal involvement often results in root surfaces becoming exposed and at risk for this condition. Periodontal therapy often leads to increased gingival recession as well, and the associated increased root caries risk may compromise the long-term success and survival of periodontally treated teeth.This narrative review will address the topic of root caries in the periodontal patient, focusing on unmet research needs.

MATERIAL AND METHODS

The Medline database was searched to identify items dealing with root caries, in terms of clinical features, diagnosis, pathogenic mechanisms and histopathology, as well as epidemiology, focusing then on the relationship between root caries and periodontal disorders.

RESULTS

Although there is extensive literature on root caries, consensus is lacking regarding certain aspects, such as diagnostic criteria, prevalence within populations and indisputable risk factors. Advancing age could be an aggravating factor in susceptibility to root caries for the periodontal patient; however, definitive evidence in this regard is still missing. Similarly, full awareness of the increased risk of root caries in patients with periodontal disease or long-term periodontal treatment appears to be still lacking.

CONCLUSION

Research regarding root caries in age-specific (elderly) periodontal patients is needed. Improved oral hygiene practices, locally applied preventive measures, good dietary habits and regular dental check-ups are crucial approaches to prevent both periodontal disease progression and root caries. Periodontal patients with root exposure should follow a strict root caries prevention protocol, as an integral component of their periodontal maintenance therapy.

A decision tree for the management of exposed cervical dentin (ECD) and dentin hypersensitivity (DHS)

INTRODUCTION

Dentin hypersensitivity (DHS) is a problematic clinical entity that may become an increasing clinical problem for dentists to treat as a consequence of patients retaining their teeth throughout life and improved oral hygiene practices.

OBJECTIVES

The aim of this review was to develop a decision tree for the management of exposed cervical dentin (ECD) and DHS.

MATERIAL AND METHODS

A brief PUBMED literature search was performed on dentin hypersensitivity using "MeSH" terms, "review", and "management". In addition, some websites and local guidelines were screened.

RESULTS

From this review, it became clear that all dentate patients should routinely be screened for ECD and DHS. In this respect, underdiagnosis of the condition will be avoided and the preventive management can be initiated early.

CONCLUSION

A decision tree process and a flowchart for daily practice were designed which should be started up as soon as a patient present with ECD or suffers from DHS. This approach takes into account the possible improved quality of life of the patient and is further based on a hierarchy of treatment options. In this respect, active management of DHS will usually involve a combination of at-home and in-office therapies. Starting with the use of desensitizing toothpastes is strongly recommended.