Lightweight, Flexible Cellulose-Derived Carbon Aerogel@Reduced Graphene Oxide/PDMS Composites with Outstanding EMI Shielding Performances and Excellent Thermal Conductivities

Flexible Polydimethylsiloxane Composite with Multi-Scale Conductive Network for Ultra-Strong Electromagnetic Interference Protection

Highlights

A multi-scale conductive network was constructed in flexible PDMS/Ag@PLASF/CNT composite with micro-size Ag@PLASF and nano-size CNT. The PDMS/Ag@PLASF/CNT composite showed outstanding electrical conductivity of 440 S m-1 and superior electromagnetic interference shielding effectiveness of up to 113 dB. The PDMS/Ag@PLASF/CNT composites owned good retention (> 90%) of electromagnetic interference shielding performance even after subjected to a simulated aging strategy or 10,000 bending-releasing cycles.

Abstract

Highly conductive polymer composites (CPCs) with excellent mechanical flexibility are ideal materials for designing excellent electromagnetic interference (EMI) shielding materials, which can be used for the electromagnetic interference protection of flexible electronic devices. It is extremely urgent to fabricate ultra-strong EMI shielding CPCs with efficient conductive networks. In this paper, a novel silver-plated polylactide short fiber (Ag@PLASF, AAF) was fabricated and was integrated with carbon nanotubes (CNT) to construct a multi-scale conductive network in polydimethylsiloxane (PDMS) matrix. The multi-scale conductive network endowed the flexible PDMS/AAF/CNT composite with excellent electrical conductivity of 440 S m−1 and ultra-strong EMI shielding effectiveness (EMI SE) of up to 113 dB, containing only 5.0 vol% of AAF and 3.0 vol% of CNT (11.1wt% conductive filler content). Due to its excellent flexibility, the composite still showed 94% and 90% retention rates of EMI SE even after subjected to a simulated aging strategy (60 °C for 7 days) and 10,000 bending-releasing cycles. This strategy provides an important guidance for designing excellent EMI shielding materials to protect the workspace, environment and sensitive circuits against radiation for flexible electronic devices.

Supplementary Information

The online version contains supplementary material available at 10.1007/s40820-022-00990-7.

Significantly Enhanced Electromagnetic Interference Shielding Performances of Epoxy Nanocomposites with Long-Range Aligned Lamellar Structures

High‑efficiency electromagnetic interference (EMI) shielding materials are of great importance for electronic equipment reliability, information security and human health. In this work, bidirectional aligned Ti₃C₂T_x@Fe₃O₄/CNF aerogels (BTFCA) were firstly assembled by bidirectional freezing and freeze-drying technique, and the BTFCA/epoxy nanocomposites with long-range aligned lamellar structures were then prepared by vacuum-assisted impregnation of epoxy resins. Benefitting from the successful construction of bidirectional aligned three-dimensional conductive networks and electromagnetic synergistic effect, when the mass fraction of Ti₃C₂T_x and Fe₃O₄ are 2.96 and 1.48 wt%, BTFCA/epoxy nanocomposites show outstanding EMI shielding effectiveness of 79 dB, about 10 times of that of blended Ti₃C₂T_x@Fe₃O₄/epoxy (8 dB) nanocomposites with the same loadings of Ti₃C₂T_x and Fe₃O₄. Meantime, the corresponding BTFCA/epoxy nanocomposites also present excellent thermal stability (T_{heat-resistance index} of 198.7 °C) and mechanical properties (storage modulus of 9902.1 MPa, Young's modulus of 4.51 GPa and hardness of 0.34 GPa). Our fabricated BTFCA/epoxy nanocomposites would greatly expand the applications of MXene and epoxy resins in the fields of information security, aerospace and weapon manufacturing, etc.

Anisotropic PDMS/Alumina/Carbon Fiber Composites with a High Thermal Conductivity and an Electromagnetic Interference Shielding Performance

The development of polymer-based composites with a high thermal conductivity and electromagnetic interference (EMI) shielding performance is crucial to the application of polymer-based composites in electronic equipment. Herein, a novel strategy combining ice-templated assembly and stress-induced orientation was proposed to prepare polydimethylsiloxane (PDMS)/alumina/carbon fiber (CF) composites. CF in the composites exhibited a highly oriented structure in the horizontal direction. Alumina was connected to the CF, promoting the formation of thermal conductive pathways in both the horizontal and vertical directions. As the CF content was 27.5 vol% and the alumina content was 14.0 vol%, the PDMS/alumina/CF composite had high thermal conductivities in the horizontal and vertical directions, which were 8.44 and 2.34 W/(m·K), respectively. The thermal conductivity in the horizontal direction was 40.2 times higher than that of PDMS and 5.0 times higher than that of the composite with a randomly distributed filler. The significant enhancement of the thermal conductivity was attributed to the oriented structure of the CF and the bridging effect of alumina. The PDMS/alumina/CF composite exhibited an excellent EMI shielding effectiveness of 40.8 dB which was 2.4 times higher than that of the composite with a randomly distributed filler. The PDMS/alumina/CF composite also exhibited a low reflectivity of the electromagnetic waves. This work could provide a guide for the research of polymer-based composites with a high thermal conductivity and an EMI shielding performance.

Recent Studies on Thermally Conductive 3D Aerogels/Foams with the Segregated Nanofiller Framework

As technology advances toward ongoing circuit miniaturization and device size reduction followed by improved power density, heat dissipation is becoming a key challenge for electronic equipment. Heat accumulation can be prevented if the heat from electrical equipment is efficiently exported, ensuring a device's lifespan and dependability and preventing otherwise possible mishaps or even explosions. Hence, thermal management applications, which include altering the role of aerogels from thermally insulative to thermally conductive, have recently been a hot topic for 3D-aerogel-based thermal interface materials. To completely comprehend three-dimensional (3D) networks, we categorized and comparatively analyzed aerogels based on carbon nanomaterials, namely fibers, nanotubes, graphene, and graphene oxide, which have capabilities that may be fused with boron nitride and impregnated for better thermal performance and mechanical stability by polymers, including epoxy, cellulose, and polydimethylsiloxane (PDMS). An alternative route is presented in the comparative analysis by carbonized cellulose. As a result, the development of structurally robust and stiff thermally conductive aerogels for electronic packaging has been predicted to increase polymer thermal management capabilities. The latest trends include the self-organization of an anisotropic structure on several hierarchical levels within a 3D framework. In this study, we highlight and analyze the recent advances in 3D-structured thermally conductive aerogels, their potential impact on the next generation of electronic components based on advanced nanocomposites, and their future prospects.

Transportable, Endurable, and Recoverable Liquid Metal Powders with Mechanical Sintering Conductivity for Flexible Electronics and Electromagnetic Interference Shielding

Liquid metals (LMs, e.g., EGaIn) promise a vast potential in accelerating the development of flexible electronics, smart robots, and wearable and biomedical devices. Although a variety of emerging processing methods are reported, they suffer several risks (e.g., leakage, weak adhesion, and low colloidal and chemical stability) because of their excellent fluidity, high surface tension, and rapid oxidation. Herein, liquid metal powders (LMPs) are fabricated based on a versatile method by vigorously stirring EGaIn with nonmetallic or organic particles through interfacial interactions. During the mixing process, EGaIn microdroplets are wrapped with a nonmetallic or an organic shell by electrostatic adsorption, and a more sticky oxide layer is constantly generated and then broken owing to the shearing friction. These transportable powders exhibit superior stability under extreme conditions (e.g., water and high temperature), being capable of recovering electrical conductivity and strong adhesion on different substrates upon mechanical sintering. A flexible, robust, and conductive coating can be constructed via swabbing with an integrated Joule heating effect and excellent electromagnetic interference shielding performances, and it is applicable in flexible wearable electronics, microcircuits, and wireless power transmission systems.

Bioinspired Micro/Nanostructured Polyethylene/Poly(Ethylene Oxide)/Graphene Films with Robust Superhydrophobicity and Excellent Antireflectivity for Solar-Thermal Power Generation, Thermal Management, and Afterheat Utilization

The rational utilization and circulation of multiple energy sources is an effective way to address the crises of energy shortages and environmental pollution. Herein, microextrusion compression molding, an industrialized polymer molding technology that combines melt blending and compression molding, is proposed for the mass production of a bioinspired micro/nanostructured polyethylene/poly(ethylene oxide)/graphene (MN-PPG) film. The MN-PPG film exhibits robust shape stability, high storage energy density, and excellent thermal management capability owing to the cocontinuous network formed by poly(ethylene oxide) and the polyethylene matrix. The MN-PPG film has sufficient photothermal property due to the uniformly dispersed graphene nanosheets and the bioinspired surface micro/nanostructures. Interestingly, the MN-PPG film surface exhibits durable superhydrophobicity, acid/alkali resistance, and active deicing performance. Further, a multifunctional energy harvesting and circulation system was established by integrating the MN-PPG film, an LED chip, and a thermoelectric module. The hybrid system produced an open-circuit voltage of 315.4 mV and power output of 2.5 W m^-2 under 3 sun irradiation. Furthermore, the afterheat generated by the LED chips at night can be converted into electricity through thermoelectric conversion. The proposed method enables the large-scale fabrication of multifunctional phase change composites for energy harvesting in harsh environments.

Superelastic, Highly Conductive, Superhydrophobic, and Powerful Electromagnetic Shielding Hybrid Aerogels Built from Orthogonal Graphene and Boron Nitride Nanoribbons

Three-dimensional (3D) elastic aerogels enable diverse applications but are usually restricted by their low thermal and electrical transfer efficiency. Here, we demonstrate a strategy for fabricating the highly thermally and electrically conductive aerogels using hybrid carbon/ceramic structural units made of hexagonal boron nitride nanoribbons (BNNRs) with in situ-grown orthogonally structured graphene (OSG). High-aspect-ratio BNNRs are first interconnected into a 3D elastic and thermally conductive skeleton, in which the horizontal graphene layers of OSG provide additional hyperchannels for electron and phonon conduction, and the vertical graphene sheets of OSG greatly improve surface roughness and charge polarization ability of the entire skeleton. The resulting OSG/BNNR hybrid aerogel exhibits very high thermal and electrical conductivity (up to 7.84 W m^-1 K^-1 and 340 S m^-1, respectively) at a low density of 45.8 mg cm^-3, which should prove to be vastly advantageous as compared to the reported carbonic and/or ceramic aerogels. Moreover, the hybrid aerogel possesses integrated properties of wide temperature-invariant superelasticity (from -196 to 600 °C), low-voltage-driven Joule heating (up to 42-134 °C at 1-4 V), strong hydrophobicity (contact angel of up to 156.1°), and powerful broadband electromagnetic interference (EMI) shielding effectiveness (reaching 70.9 dB at 2 mm thickness), all of which can maintain very well under repeated mechanical deformations and long-term immersion in strong acid or alkali solution. Using these extraordinary comprehensive properties, we prove the great potential of OSG/BNNR hybrid aerogel in wearable electronics for regulating body temperature, proofing water and pollution, removing ice, and protecting human health against EMI.

Recycling Nanoarchitectonics of Graphene Oxide from Carbon Fiber Reinforced Polymer by the Electrochemical Method

In this paper, an electrochemical method was proposed to recycle nanoarchitectonics of graphene oxide (GO) from carbon fiber reinforced polymer (CFRP). In the recycling process, NaCl solution with varied concentrations (3% and 10%) and tap water were used as electrolyte, while the impressed current density varied from 2.67 A/m² to 20.63 A/m². The results indicated that in NaCl electrolyte, the obtained nanoarchitectonics of GO contained a large amount of nano-carbon onions (NCO) produced by etching CFRP, while high purity GO was produced when tap water was used as electrolyte. The higher current density improved the production efficiency and resulted in a finer GO particle size. The proposed recycling method of GO is economical and simple to operate. It also provides an alternate approach to handle discarded CFRP.

Highly flexible and ultrathin electromagnetic-interference-shielding film with a sandwich structure based on PTFE@Cu and Ni@PVDF nanocomposite materials

Light and flexible electromagnetic-interference-shielding materials are of great significance to control electromagnetic pollution and protect the human body and other nearby equipment or systems. In this study, a film of polytetrafluoroethylene wrapped with copper (PTFE@Cu) was prepared by depositing Cu using electroless plating on the surface of a microporous PTFE film modified by dopamine. A Ni@PVDF membrane was fabricated by casting a suspension of Ni nanochains in PVDF. The two kinds of films were hot-pressed into an ultrathin and efficient electromagnetic-shielding film with a sandwich structure. PTFE and PVDF provided high flexibility to the composite film, while the metal-wrapped polymer fiber structure gave the film an excellent electromagnetic-shielding efficiency, and the Ni nanochains and laminated hot-pressing process further enhanced the shielding ability of the film. Through these combined effects, the conductivity of the composite film reached 1117.57 S cm⁻¹ while the thickness was only about 80 μm, and the average shielding efficiency in the X-band range was as high as 57.16 dB with absorption accounting for about 67.2% of the total shielding. At the same time, the composite film had high strength and flexibility, and the tensile strength could reach 43.49 MPa. Even after bending 1000 times, the conductivity could still be maintained at 174.55 S cm⁻¹, while the average shielding effectiveness in the X-band range was retained at 44.29 dB. The film has great latent applications in flexible devices and portable wearable intelligent devices.

Light and flexible electromagnetic-interference-shielding materials are of great significance to control electromagnetic pollution and protect the human body and other nearby equipment or systems.

Optimized Properties in Multifunctional Polyphenylene Sulfide Composites via Graphene Nanosheets/Boron Nitride Nanosheets Dual Segregated Structure under High Pressure

The practical application of polymer composites in the electronic and communications industries often requires multi-properties, such as high thermal conductivity (TC), efficient electromagnetic interference (EMI) shielding ability with low electrical conductivity, superior tribological performance, reliable thermal stability and excellent mechanical properties. However, the integration of these mutually exclusive properties is still a challenge, ascribed to their different requirement on the incorporated nanofillers, composite microstructure as well as processing process. Herein, a well-designed boron nitride nanosheet (BN)/graphene nanosheet (GNP)/polyphenylene sulfide (PPS) composite with a dual-segregated structure is fabricated via high-pressure molding. Rather than homogenous mixing of the hybrid fillers, GNP is first coated on PPS particles and followed by encapsulating the conductive GNP layers with insulating BN, forming a BN shell-GNP layer-PPS core composite particles. After hot-pressing, a dual segregated structure is constructed, in which GNP and BN are distinctly separated and arranged in the interfaces of PPS, which on the one hand gives rise to high thermal conductivity, and on the other hand, the aggregated BN layer can act as an "isolation belt" to effectively reduce the electronic transmission. Impressively, high-pressure is loaded and it has a more profound effect on the EMI shielding and thermal conductive properties of PPS composites with a segregated structure than that with homogenous mixed-structure composites. Intriguingly, the synergetic enhancement effect of BN and GNP on both thermal conductive performance and EMI shielding is stimulated by high pressure. Consequently, PPS composites with 30 wt% GNP and 10 wt% BN hot-pressed under 600 MPa present the most superior comprehensive properties with a high TC of 6.4 W/m/K, outstanding EMI SE as high as 70 dB, marvelous tribological performance, reliable thermal stability and satisfactory mechanical properties, which make it promising for application in miniaturized electronic devices in complex environments.

Direct-Writable and Thermally One-Step Curable “Water-Stained” Epoxy Composite Inks

In this study, a simple method for preparing direct-writable and thermally one-step curable epoxy composite inks was proposed. Specifically, colloidal inks containing a mixture of ordinary epoxy resin and anhydride-type hardener with the suspended alumina microplates, as exemplary fillers, are “stained” with small amounts of water. This increases the elasticity of the ink via the interparticle capillary attraction and promotes curing of the epoxy matrix in low-temperature ranges, causing the three-dimensional (3D) printed ink to avoid structural disruption during one-step thermal curing without the tedious pre-curing step. The proposed mechanisms for the shape retention of thermally cured water-stained inks were discussed with thorough analyses using shear rheometry, DSC, FTIR, and SEM. Results of the computer-vision numerical analysis of the SEM images reveal that the particles in water-stained inks are oriented more in the vertical direction than those in water-free samples, corroborating the proposed mechanisms. The suggested concept is extremely simple and does not require any additional cost to the one required for the preparation of the common epoxy–filler composites, which is thus expected to be well-exploited in various applications where 3D printing of epoxy-based formulations is necessary.

Highly Flexible Fabrics/Epoxy Composites with Hybrid Carbon Nanofillers for Absorption-Dominated Electromagnetic Interference Shielding

Epoxy-based nanocomposites can be ideal electromagnetic interference (EMI)-shielding materials owing to their lightness, chemical inertness, and mechanical durability. However, poor conductivity and brittleness of the epoxy resin are challenges for fast-growing portable and flexible EMI-shielding applications, such as smart wristband, medical cloth, aerospace, and military equipment. In this study, we explored hybrid nanofillers of single-walled carbon nanotubes (SWCNT)/reduced graphene oxide (rGO) as conductive inks and polyester fabrics (PFs) as a substrate for flexible EMI-shielding composites. The highest electrical conductivity and fracture toughness of the SWCNT/rGO/PF/epoxy composites were 30.2 S m^-1 and 38.5 MPa m^1/2, which are ~ 270 and 65% enhancement over those of the composites without SWCNTs, respectively. Excellent mechanical durability was demonstrated by stable electrical conductivity retention during 1000 cycles of bending test. An EMI-shielding effectiveness of ~ 41 dB in the X-band frequency of 8.2-12.4 GHz with a thickness of 0.6 mm was obtained with an EM absorption-dominant behavior over a 0.7 absorption coefficient. These results are attributed to the hierarchical architecture of the macroscale PF skeleton and nanoscale SWCNT/rGO networks, leading to superior EMI-shielding performance. We believe that this approach provides highly flexible and robust EMI-shielding composites for next-generation wearable electronic devices.

Printable Aligned Single-Walled Carbon Nanotube Film with Outstanding Thermal Conductivity and Electromagnetic Interference Shielding Performance

Ultrathin, lightweight, and flexible aligned single-walled carbon nanotube (SWCNT) films are fabricated by a facile, environmentally friendly, and scalable printing methodology. The aligned pattern and outstanding intrinsic properties render "metal-like" thermal conductivity of the SWCNT films, as well as excellent mechanical strength, flexibility, and hydrophobicity. Further, the aligned cellular microstructure promotes the electromagnetic interference (EMI) shielding ability of the SWCNTs, leading to excellent shielding effectiveness (SE) of ~ 39 to 90 dB despite a density of only ~ 0.6 g cm^-3 at thicknesses of merely 1.5-24 µm, respectively. An ultrahigh thickness-specific SE of 25 693 dB mm^-1 and an unprecedented normalized specific SE of 428 222 dB cm² g^-1 are accomplished by the freestanding SWCNT films, significantly surpassing previously reported shielding materials. In addition to an EMI SE greater than 54 dB in an ultra-broadband frequency range of around 400 GHz, the films demonstrate excellent EMI shielding stability and reliability when subjected to mechanical deformation, chemical (acid/alkali/organic solvent) corrosion, and high-/low-temperature environments. The novel printed SWCNT films offer significant potential for practical applications in the aerospace, defense, precision components, and smart wearable electronics industries.

Self-Exfoliation of Flake Graphite for Bioinspired Compositing with Aramid Nanofiber toward Integration of Mechanical and Thermoconductive Properties

A self-grinding exfoliation strategy that depends on mutual shear friction between flake graphite particles is successfully developed to prepare pristine graphene with largely enhanced yield and productivity. Bioinspired assembly of pristine graphene nanosheets to an interconnected aramid nanofiber network is achieved by a continuous sol-gel-film transformation strategy and generates a flexible yet highly thermoconductive film. Flexible yet highly thermoconductive materials are essential for the development of next-generation flexible electronic devices. Herein, we report a bioinspired nanostructured film with the integration of large ductility and high thermal conductivity based on self-exfoliated pristine graphene and three-dimensional aramid nanofiber network. A self-grinding strategy to directly exfoliate flake graphite into few-layer and few-defect pristine graphene is successfully developed through mutual shear friction between graphite particles, generating largely enhanced yield and productivity in comparison to normal liquid-based exfoliation strategies, such as ultrasonication, high-shear mixing and ball milling. Inspired by nacre, a new bioinspired layered structural design model containing three-dimensional nanofiber network is proposed and implemented with an interconnected aramid nanofiber network and high-loading graphene nanosheets by a developed continuous assembly strategy of sol-gel-film transformation. It is revealed that the bioinspired film not only exhibits nacre-like ductile deformation behavior by releasing the hidden length of curved aramid nanofibers, but also possesses good thermal transport ability by directionally conducting heat along pristine graphene nanosheets.

Interfused core-shell heterogeneous graphene/MXene fiber aerogel for high-performance and durable electromagnetic interference shielding

Flexible, lightweight, and durable electromagnetic interference (EMI) shielding materials are urgently required to solve the increasingly serious electromagnetic radiation pollution. Transition metal carbides/nitrides (MXenes) are promising candidates for EMI shielding materials because of their excellent metallic electrical conductivity. However, MXenes are highly susceptible to oxidization when exposed to wet environments, leading to the loss of their functional properties and degradation of reliability and stability. Herein, an interfused core-shell heterogeneous reduced graphene oxide (rGO)/MXene aerogel (GMA) is designed for the first time via coaxial wet spinning and freeze-drying. The fabricated GMAs exhibit excellent EMI shielding performance, and the EMI shielding effectiveness (SE) and specific EMI SE can be up to 83.3 dB and 3119 dB·cm³/g, respectively, which is higher than most carbon-based and MXene-based aerogels and foams. More importantly, GMAs have only a 17.4 % degradation in EMI shielding performance after 120 days due to the protection of hydrophobic graphene sheath, exhibiting superior EMI shielding durability to its MXene film counterpart. Moreover, the hydrophobic GMAs exhibit good oil/water separation and thermal insulation performance. The interfused core-shell GMAs are highly promising for applications in durable EMI shielding, thermal insulation, oil/water separation and sensors, etc.

Improved Dispersibility of Graphene in an Aqueous Solution by Reduced Graphene Oxide Surfactant: Experimental Verification and Density Functional Theory Calculation

It is difficult to disperse graphene flakes well in an aqueous solution while maintaining conductivity due to its high hydrophobicity. Herein, we demonstrated that a well-dispersed state of graphene in an aqueous solution was realized by using reduced graphene oxide (rGO) with a suitable content of oxygen-functional groups. A rGO-dispersed graphene (rGO/G) film was fabricated from the graphene dispersion with good conductivity by using rGO with a C/O ratio of 2.48 as the surfactant. Also, the prepared rGO/G aerogel has a broad prospect. Density functional theory calculation revealed that the strong electrostatic repulsion, which was more potent than the van der Waals force and the π-π interaction, was the primary driving force promoting the dispersibility of graphene in an aqueous solution. Furthermore, the repulsion of the rGO/G dispersion decreased with the reduction of the oxygen-functional groups of rGO. Therefore, applying rGO with an appropriate content of oxygen-functional groups is an alternative option to improve the dispersibility of graphene in an aqueous medium while maintaining its original properties, from which many potential applications could be expected.

Structural evolution of MXenes and their composites for electromagnetic interference shielding applications

Nowadays, the extensive utilization of electronic devices and equipment inevitably leads to severe electromagnetic interference (EMI) issues. Therefore, EMI shielding materials have drawn considerable attention, and great effort has been devoted to the exploration of high-efficiency EMI shielding materials. As a novel kind of 2D transition metal carbide material, MXenes have been widely investigated for EMI shielding in the past few years due to their extraordinary electrical conductivity, large specific surface area, light weight, and easy processability. In view of the great achievements in MXene-based materials for EMI shielding, herein, we reviewed the recent studies on the structural design and evolution of MXenes and their composites for EMI shielding. First, the methods for structural control of MXenes, including HF etching, in situ HF etching, fluorine-free etching, electrochemical etching, and molten salt etching, are systematically summarized. Then we illustrate the fundamental relationship between the microstructure of MXenes and the EMI shielding mechanism. In the following, the effects of different synthesis methods and structures of MXene-based composite materials as well as their EMI shielding performances are comprehensively discussed. Lastly, future prospects for the development of MXene-based composite materials in EMI shielding applications are commented on.

Development of lab-on-chip biosensor for the detection of toxic heavy metals: A review

Recently, a decrease in water availability and quality has been raised due to rapid industrialization, unsustainable agricultural activities and anthropogenic activities. Heavy metals are considered significant pollutants in the water environment, cause environmental hazards and health effects to humans. For monitoring water contaminants utilized different conventional techniques. Still, they have some drawbacks, such as cost expensive, ecological issues, and processing time, requiring technicians and researchers to operate them effectively. Biosensors have become reasonable devices for screening and identifying environmental contaminants because of their different benefits contrasted with other detecting techniques. This review summarizes the toxic effect of heavy metal and their source, occurrence. A detailed discussion is provided on the heavy metal recognition materials for detecting heavy metals in wastewater. Lab on chip (LOC) is an emerging micro-electrical mechanical system (MEMS) device that intakes liquid and makes it move through the micro-channels, to accomplish fast, cost-effective and profoundly sensitive analysis with significant yield. LOC also provided a discussion on numerous laboratory functions on a single platform. This article attempts to discuss the detection of heavy metals using lab on a chip by suitable recognition materials. Further, the design and fabrication mechanism and their recognition abilities of LOC were also reviewed. The review mainly focuses on the application of LOC biosensors, pros, and cons, and suggests a roadmap towards future development to enhance the practical use in pollutant monitoring.

Fabrication of one-dimensional M (Co, Ni)@polyaniline nanochains with adjustable thickness for excellent microwave absorption properties

The development of microwave absorbing materials with strong absorption capacity, wide bandwidth and light weight has always been a topic of concern. Herein, one-dimensional (1D) M (Co, Ni)@polyaniline (PANI) nanochains (NCs) with adjustable thickness have been successfully synthesized by reducing the mental ions under a parallel magnetic field, pretreating metal nanochains with KH550 and pre-oxidization of aniline monomer. It is found that Co has a more favorable absorption width for electromagnetic waves (EMW) and Ni aims at the absorption intensity. Furthermore, the effect of metal elements on adjusting impedance matching is more significant than their magnetic loss for composites. The minimum reflection loss (RLmin) of CoP2 can be up to -73.16 dB at 4.63 mm and the effective absorption bandwidth (EAB) is 4.98 GHz at 2.17 mm, while those of NiP2 are -65.06 dB at 3.88 mm and 5.02 GHz at 2.05 mm. The increase of PANI content can significantly reduce the matching thickness. And the RLmin of CoP3 and NiP3 can reach -58.72 dB at 2.32 mm and -65.96 dB at 1.59 mm, respectively. The absorption mechanism reveals that the matching thickness of the quarter-wavelength determines frequency location. And high absorption intensity is attributed to the synergistic effects of impedance matching, conduction loss, polarization loss, and magnetic loss. This work provides a theoretical basis for designing PANI or other conducting polymers coating magnetic nanochains for electromagnetic absorbing materials with strong absorption capacity, wide bandwidth and light weight.

Enhanced Electromagnetic Shielding and Thermal Conductive Properties of Polyolefin Composites with a Ti3C2Tx MXene/Graphene Framework Connected by a Hydrogen-Bonded Interface

The rapid increase of operation speed, transmission efficiency, and power density of miniaturized devices leads to a rising demand for electromagnetic interference (EMI) shielding and thermal management materials in the semiconductor industry. Therefore, it is essential to improve both the EMI shielding and thermal conductive properties of commonly used polyolefin components (such as polyethylene (PE)) in electronic systems. Currently, melt compounding is the most common method to fabricate polyolefin composites, but the difficulty of filler dispersion and high resistance at the filler/filler or filler/matrix interface limits their properties. Here, a fold fabrication strategy was proposed to prepare PE composites by incorporation of a well-aligned, seamless graphene framework premodified with MXene nanosheets into the matrix. We demonstrate that the physical properties of the composites can be further improved at the same filler loading by nanoscale interface engineering: the formation of hydrogen bonds at the graphene/MXene interface and the development of a seamlessly interconnected graphene framework. The obtained PE composites exhibit an EMI shielding property of ∼61.0 dB and a thermal conductivity of 9.26 W m^-1 K^-1 at a low filler content (∼3 wt %, including ∼0.4 wt % MXene). Moreover, other thermoplastic composites with the same results can also be produced based on our method. Our study provides an idea toward rational design of the filler interface to prepare high-performance polymer composites for use in microelectronics and microsystems.

Highly Thermally Conductive Polymer/Graphene Composites with Rapid Room-Temperature Self-Healing Capacity

Composites that can rapidly self-healing their structure and function at room temperature have broad application prospects. However, in view of the complexity of composite structure and composition, its self-heal is facing challenges. In this article, supramolecular effect is proposed to repair the multistage structure, mechanical and thermal properties of composite materials. A stiff and tough supramolecular frameworks of 2-[[(butylamino)carbonyl]oxy]ethyl ester (PBA)-polydimethylsiloxane (PDMS) were established using a chain extender with double amide bonds in a side chain to extend prepolymers through copolymerization. Then, by introducing the copolymer into a folded graphene film (FGf), a highly thermally conductive composite of PBA-PDMS/FGf with self-healing capacity was fabricated. The ratio of crosslinking and hydrogen bonding was optimized to ensure that PBA-PDMS could completely self-heal at room temperature in 10 min. Additionally, PBA-PDMS/FGf exhibits a high tensile strength of 2.23 ± 0.15 MPa at break and high thermal conductivity of 13 ± 0.2 W m^-1 K^-1; of which the self-healing efficiencies were 100% and 98.65% at room temperature for tensile strength and thermal conductivity, respectively. The excellent self-healing performance comes from the efficient supramolecular interaction between polymer molecules, as well as polymer molecule and graphene. This kind of thermal conductive self-healing composite has important application prospects in the heat dissipation field of next generation electronic devices in the future.

Interconnected MXene/Graphene Network Constructed by Soft Template for Multi-Performance Improvement of Polymer Composites

The multi-functionalization of polymer composites refers to the ability to connect multiple properties through simple structural design and simultaneously achieve multi-performance optimization. The large-scale design and mass production to realize the reasonable structure design of multifunctional polymer composites are urgently remaining challenges. Herein, the multifunctional MXene/graphene/polymer composites with three-dimensional thermally and electrically conductive network structures are fabricated via the utilization of the microstructure of the soft template, and a facile dispersion dip-coating approach. As a result, the polymer composites have a multi-performance improvement. At the MXene and graphene content of 18.7 wt%, the superior through-plane thermal conductivity of polymer composite is 2.44 W m^-1 K^-1, which is 1118% higher than that of the polymer matrix. The electromagnetic interference (EMI) shielding effectiveness of the sample reaches 43.3 dB in the range of X-band. And the mechanical property of the sample has advanced 4 times compared with the polymer matrix. The excellent EMI shielding and thermal management performance, along with the effortless and easy-to-scalable producing techniques, imply promising perspectives of the polymer composites in the next-generation smart electronic devices.

Recent advances in biomedical applications of 2D nanomaterials with peroxidase-like properties

Significant progress has been made in developing two-dimensional (2D) nanomaterials owing to their ultra-thin structure, high specific surface area, and many other advantages. Recently, 2D nanomaterials with enzyme-like properties, especially peroxidase (POD)-like activity, are highly desirable for many biomedical applications. In this review, we first classify the types of 2D POD-like nanomaterials and then summarize various strategies for endowing 2D nanomaterials with POD-like properties. Representative examples of biomedical applications are reviewed, emphasizing in antibacterial, biosensing, and cancer therapy. Last, the future challenges and prospects of 2D POD-like nanomaterials are discussed. This review is expected to provide an in-depth understanding of 2D POD-like materials for biomedical applications.

Digital Light Processing 3D-Printed Ceramic Metamaterials for Electromagnetic Wave Absorption

Combining 3D printing with precursor-derived ceramic for fabricating electromagnetic (EM) wave-absorbing metamaterials has attracted great attention. This study presents a novel ultraviolet-curable polysiloxane precursor for digital light processing (DLP) 3D printing to fabricate ceramic parts with complex geometry, no cracks and linear shrinkage. Guiding with the principles of impedance matching, attenuation, and effective-medium theory, we design a cross-helix-array metamaterial model based on the complex permittivity constant of precursor-derived ceramics. The corresponding ceramic metamaterials can be successfully prepared by DLP printing and subsequent pyrolysis process, achieving a low reflection coefficient and a wide effective absorption bandwidth in the X-band even under high temperature. This is a general method that can be extended to other bands, which can be realized by merely adjusting the unit structure of metamaterials. This strategy provides a novel and effective avenue to achieve "target-design-fabricating" ceramic metamaterials, and it exposes the downstream applications of highly efficient and broad EM wave-absorbing materials and structures with great potential applications.

Vertically Aligned Silicon Carbide Nanowires/Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites

With the innovation of microelectronics technology, the heat dissipation problem inside the device will face a severe test. In this work, cellulose aerogel (CA) with highly enhanced thermal conductivity (TC) in vertical planes was successfully obtained by constructing a vertically aligned silicon carbide nanowires (SiC NWs)/boron nitride (BN) network via the ice template-assisted strategy. The unique network structure of SiC NWs connected to BN ensures that the TC of the composite in the vertical direction reaches 2.21 W m^-1 K^-1 at a low hybrid filler loading of 16.69 wt%, which was increased by 890% compared to pure epoxy (EP). In addition, relying on unique porous network structure of CA, EP-based composite also showed higher TC than other comparative samples in the horizontal direction. Meanwhile, the composite exhibits good electrically insulating with a volume electrical resistivity about 2.35 × 10¹¹ Ω cm and displays excellent electromagnetic wave absorption performance with a minimum reflection loss of - 21.5 dB and a wide effective absorption bandwidth (< - 10 dB) from 8.8 to 11.6 GHz. Therefore, this work provides a new strategy for manufacturing polymer-based composites with excellent multifunctional performances in microelectronic packaging applications.

Cellulose Nanopaper: Fabrication, Functionalization, and Applications

Cellulose nanopaper has shown great potential in diverse fields including optoelectronic devices, food packaging, biomedical application, and so forth, owing to their various advantages such as good flexibility, tunable light transmittance, high thermal stability, low thermal expansion coefficient, and superior mechanical properties. Herein, recent progress on the fabrication and applications of cellulose nanopaper is summarized and discussed based on the analyses of the latest studies. We begin with a brief introduction of the three types of nanocellulose: cellulose nanocrystals, cellulose nanofibrils and bacterial cellulose, recapitulating their differences in preparation and properties. Then, the main preparation methods of cellulose nanopaper including filtration method and casting method as well as the newly developed technology are systematically elaborated and compared. Furthermore, the advanced applications of cellulose nanopaper including energy storage, electronic devices, water treatment, and high-performance packaging materials were highlighted. Finally, the prospects and ongoing challenges of cellulose nanopaper were summarized.

Computational Optimizing the Electromagnetic Wave Reflectivity of Double-Layered Polymer Nanocomposites

Double-layered absorption-dominated electromagnetic interference (EMI) shielding composites are highly desirable to prevent secondary electromagnetic wave pollution. However, it is a tremendous challenge to optimize the shielding performance via the trial-and-error method due to the low efficiency. Herein, a novel approach of computation-aided experimental design is proposed to efficiently optimize the reflectivity of the double-layered composites. A normalized input impedance (NII) method is presented to calculate the electromagnetic wave reflectivity of multilayered EMI shielding composites. The calculated results are a good match with the experimental results. Then, the NII method is utilized to design polyvinylidene difluoride/MXene/carbon nanotube (PVDF/MXene/CNT) composites. According to the optimization of the NII method, the prepared PVDF/MXene/CNT composite has an ultralow reflectivity of 0.000057, which outperforms that reported in current work and satisfies the requirement of electromagnetic wave absorbing material. Additionally, its average EMI shielding effectiveness is 30 dB, demonstrating that PVDF/MXene/CNT composite simultaneously achieves shielding and absorption. The ultralow reflection mechanism can be ascribed to the ideal impedance match. Both the PVDF/MXene and the PVDF/CNT layers can attenuate electromagnetic energy, which subverts the traditional cognition of double-layered absorption-dominated EMI shielding composites. The NII method opens a way for the practical fabrication of double-layered absorption-dominated EMI shielding composites.

A Perspective for Developing Polymer-Based Electromagnetic Interference Shielding Composites

The rapid development of aerospace weapons and equipment, wireless base stations and 5G communication technologies has put forward newer and higher requirements for the comprehensive performances of polymer-based electromagnetic interference (EMI) shielding composites. However, most of currently prepared polymer-based EMI shielding composites are still difficult to combine high performance and multi-functionality. In response to this, based on the research works of relevant researchers as well as our research group, three possible directions to break through the above bottlenecks are proposed, including construction of efficient conductive networks, optimization of multi-interfaces for lightweight and multifunction compatibility design. The future development trends in three directions are prospected, and it is hoped to provide certain theoretical basis and technical guidance for the preparation, research and development of polymer-based EMI shielding composites.

An Ultrastrong and Antibacterial Silver Nanowire/Aligned Cellulose Scaffold Composite Film for Electromagnetic Interference Shielding

Constructing multifunctional electromagnetic interference (EMI) shielding films with superior mechanical strength has sparked a lot of interest in the fields of wearable electronics. In this work, the conductive silver nanowires (AgNWs) were synthesized and impregnated into the highly aligned cellulose scaffold (CS) fabricated by wood delignification followed by hot-pressing and polydimethylsiloxane (PDMS) dipping processes to obtain the outstanding EMI shielding cellulosic film (d-AgNWs@CS-PDMS). The consecutively conductive pathway of AgNWs was constructed in the microchannels of the CS as a result of the hydrogen bonding between AgNWs and cellulose fibers, which is conducive to the reflection of incident EM waves. The higher degree of nanofiber alignment and the compact conductive network were improved by densification upon hot pressing, which endows the composite film with striking mechanical properties (maximum tensile strength of 511.8 MPa) and superb EMI shielding performance (shielding effectiveness value of 46 dB with a filler content of 21.6 wt %) at the X band (8.2-12.4 GHz). Moreover, the existence of an intensive AgNWs network and the introduction of the PDMS layer improve the hydrophobicity and antibacterial activity of the composite film, avoiding serious health concerns in the long-term wearing. These results demonstrate that the obtained d-AgNWs@CS-PDMS composite film has high potential as an EMI shielding material used for wearable devices.

Hierarchical Ti3C2Tx@ZnO Hollow Spheres with Excellent Microwave Absorption Inspired by the Visual Phenomenon of Eyeless Urchins

Ingenious microstructure design and rational composition selection are effective approaches to realize high-performance microwave absorbers, and the advancement of biomimetic manufacturing provides a new strategy. In nature, urchins are the animals without eyes but can "see", because their special structure composed of regular spines and spherical photosensitive bodies "amplifies" the light-receiving ability. Herein, inspired by the above phenomenon, the biomimetic urchin-like Ti3C2Tx@ZnO hollow microspheres are rationally designed and fabricated, in which ZnO nanoarrays (length: ~ 2.3 μm, diameter: ~ 100 nm) as the urchin spines are evenly grafted onto the surface of the Ti3C2Tx hollow spheres (diameter: ~ 4.2 μm) as the urchin spherical photosensitive bodies. The construction of gradient impedance and hierarchical heterostructures enhance the attenuation of incident electromagnetic waves. And the EMW loss behavior is further revealed by limited integral simulation calculations, which fully highlights the advantages of the urchin-like architecture. As a result, the Ti3C2Tx@ZnO hollow spheres deliver a strong reflection loss of - 57.4 dB and broad effective absorption bandwidth of 6.56 GHz, superior to similar absorbents. This work provides a new biomimetic strategy for the design and manufacturing of advanced microwave absorbers.

Flexible Ti3C2T x /(Aramid Nanofiber/PVA) Composite Films for Superior Electromagnetic Interference Shielding

Multifunctional electromagnetic interference (EMI) shielding materials would solve electromagnetic radiation and pollution problems from electronic devices. Herein, the directional freeze-drying technology is utilized to prepare the aramid nanofiber/polyvinyl alcohol aerogel with a directionally porous structure (D-ANF/PVA), and the Ti₃C₂T_x dispersion is fully immersed into the D-ANF/PVA aerogel via ultrasonication and vacuum-assisted impregnation. Ti₃C₂T_x/(ANF/PVA) EMI shielding composite films with directionally ordered structure (D-Ti₃C₂T_x/(ANF/PVA)) are then prepared by freeze-drying and hot pressing. Constructing a directionally porous structure enables the highly conductive Ti₃C₂T_x nanosheets to be wrapped on the directionally porous D-ANF/PVA framework in order arrangement and overlapped with each other. And the hot pressing process effectively reduces the layer spacing between the stacked wavy D-ANF/PVA, to form a large number of Ti₃C₂T_x-Ti₃C₂T_x continuous conductive paths, which significantly improves the conductivity of the D-Ti₃C₂T_x/(ANF/PVA) EMI shielding composite film. When the amount of Ti₃C₂T_x is 80 wt%, the EMI shielding effectiveness (EMI SE) and specific SE (SSE/t) of D-Ti₃C₂T_x/(ANF/PVA) EMI shielding composite film achieve 70 dB and 13790 dB·cm²·g⁻¹ (thickness and density of 120 μm and 0.423 g·cm⁻³), far superior to random-structured Ti₃C₂T_x/(ANF/PVA) (R-Ti₃C₂T_x/(ANF/PVA)) composite film (46 dB and 9062 dB·cm²·g⁻¹, respectively) via blending-freeze-drying followed by hot pressing technology. Meanwhile, the D-Ti₃C₂T_x/(ANF/PVA) EMI shielding composite film possesses excellent flexibility and foldability.