Palatal growth studied on human autopsy material. A histologic microradiographic study

Skeletal and alveolar changes in conventional rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE): a prospective randomized clinical trial using low-dose CBCT

Background

This prospective randomized clinical trial aimed to evaluate the immediate and short-term skeletal, dentoalveolar, and periodontal effects of rapid palatal expansion (RPE) and miniscrew-assisted RPE (MARPE) in adolescent and young adult patients.

Methods

This study followed a two-arm, parallel, randomized clinical trial design that recruited patients with transverse maxillary deficiency in a 1:1 allocation ratio. Forty patients (14 men and 26 women) requiring maxillary expansion were randomly allocated to the RPE (n = 20, age = 14.0 ± 4.5) or MARPE (n = 20, age = 14.1 ± 4.2) groups. The assignment was performed via computer-generated block randomization, with a block size of four. Upon identical (35 turns) amount of expansion, low-dose cone-beam computed tomography images were taken before treatment (T0), immediately after expansion (T1), and after a 3-month consolidation period (T2). The primary outcome of this study comprised the assessment of midpalatal suture separation. Secondary outcomes included, skeletal, dentoalveolar, and periodontal measurements, which were performed at each time point.

Results

The frequency of midpalatal suture separation was 90% (18/20) and 95% (19/20) for the RPE and MARPE groups, respectively. A greater increase in nasal width in the molar region (M-NW) and greater palatine foramen (GPF) was observed immediately after the expansion (T1-T0) and consolidation periods (T2-T0) in the MARPE group compared to the RPE group (P < 0.05). The MARPE and RPE groups showed similar dentoalveolar changes except for the maxillary width (PM-MW, M-MW). The MARPE group presented greater bilateral first premolar (PM-MW) and molar (M-MW) maxillary width in relation to the RPE group (P < 0.05). Through the expansion and consolidation periods (T2-T0), lesser buccal displacement of the anchor teeth was observed in the MARPE group (PM-BBPT, PM-PBPT, M-BBPT [mesial and distal roots], and M-PBPT)( P < 0.05).

Conclusions

Midpalatal suture separation was observed in 90% and 95% of patients in the RPE and MARPE groups, respectively. Both RPE and MARPE groups exhibited significant triangular basal bone expansion and skeletal relapse during consolidation. Under identical amounts of expansion, the MARPE group showed lower decrease in the skeletal, dentoalveolar and periodontal variables after consolidation. The reinforcement of RPE with miniscrews contributes to the maintenance of the basal bone during consolidation period.

Trial registration WHO Institutional Clinical Trials Registry Platform (IRB No. KCT0006871 / Registration date 27/12/2021).

Short-Term and Long-Term Changes of Nasal Soft Tissue after Rapid Maxillary Expansion (RME) with Tooth-Borne and Bone-Borne Devices. A CBCT Retrospective Study

The objective of the study was to assess the changes in nasal soft tissues after RME was performed with tooth-borne (TB) and bone-borne (BB) appliances. Methods. This study included 40 subjects with a diagnosis of posterior cross-bite who received tooth-borne RME (TB, average age: 11.75 ± 1.13 years) or bone-borne RME (BB, average age: 12.68 ± 1.31 years). Cone-beam computed tomography (CBCT) was taken before treatment (T0), after a 6-month retention period (T1), and one year after retention (T2). Specific linear measurements of the skeletal components and of the soft-tissue region of the nose were performed. All data were statistically analyzed. Results. Concerning skeletal measurements, the BB group showed a greater skeletal expansion of the anterior and posterior region of the nose compared to the TB group (p < 0.05) immediately after RME. Both TB and BB RME induce a small increment (>1 mm) of the alar base and alar width, without significant differences between the two expansion methods (p > 0.05). A high correlation was found between skeletal and soft-tissue expansion in the TB group; instead, a weaker correlation was found in the BB group. Conclusion. A similar slight increment of the alar width and alar base width was found in both TB and BB groups. However, the clinical relevance of these differences, in terms of facial appearance, remains questionable.

Differences in dentoskeletal and soft tissue changes due to rapid maxillary expansion using a tooth-borne expander between adolescents and adults: A retrospective observational study

Objective

The purpose of this study was to compare the differences in dentoskeletal and soft tissue changes following conventional tooth-borne rapid maxillary expansion (RME) between adolescents and adults.

Methods

Dentoskeletal and soft tissue variables of 17 adolescents and 17 adults were analyzed on posteroanterior and lateral cephalograms and frontal photographs at pretreatment (T1) and after conventional RME using tooth-borne expanders (T2). Changes in variables within each group between T1 and T2 were analyzed using Wilcoxon signed-rank test. Mann–Whitney U test was used to determine the differences in the pretreatment age, expansion and post-expansion durations, and dentoskeletal and soft tissue changes after RME between the groups. Spearman’s correlation between pretreatment age and transverse dentoskeletal changes in the adolescent group was calculated.

Results

Despite similar amounts of expansion at the crown level in both groups, the adult group underwent less skeletal expansion with less intermolar root expansion after RME than the adolescent group. The skeletal vertical dimension increased significantly in both groups without significant intergroup difference. The anteroposterior position of the maxilla was maintained in both groups, while a greater backward displacement of the mandible was evident in the adult group than that in the adolescent group after RME. The soft tissue alar width increased in both groups without a significant intergroup difference. In the adolescent group, pretreatment age was not significantly correlated with transverse dentoskeletal changes.

Conclusions

Conventional RME may induce similar soft tissue changes but different dentoskeletal changes between adolescents and adults.

Midpalatal suture maturation staging using cone beam computed tomography in patients aged between 9 to 21 years

Midpalatal suture was analysed with cone beam computed tomography to identify its maturation with respect to age and maxillary-complex growth in 72 patients 9- to 21-year-old. Maxillary-complex was divided in premaxillary, maxillary, and palatine segment. Interdigitation and ossification of midpalatal suture, its density relative to hard tissues and soft tissues, and midpalatal suture density ratio were measured for each segment. Correlation of each parameter with age and maxillary-complex length was analysed, and classification trees were developed for staging parameters. Midpalatal suture maturation stages (MPSMS, from A to E) were applied to assess relationship with age and maxillary-complex length. Regarding age, ossification increased in maxillary segment of males (r_S = 0.39, p = 0.032), while suture density relative to soft tissues increased in maxillary (r_S = 0.37, p = 0.042) and palatine segments (r_S = 0.41, p = 0.027) of males and in palatine segment of females (r_S = 0.32, p = 0.041). In males, suture density relative to soft tissues discriminated two age-stages (p = 0.024), and the same parameter (p = 0.023) paired with ossification (p = 0.027) discriminated two length-stages. MPSMS identified length-differences between stage A and B in females (p = 0.001). Midpalatal-suture ossification and its density relative to soft tissues showed some relationship with age and maxillary-complex length, especially in males. However, challenging staging and limitations in the imaging method may limit clinical applications.

Impact of rapid maxillary expansion on palatal morphology at different dentition stages

Objective

Rapid maxillary expansion (RME) is an established and frequently used procedure to overcome maxillary constriction. In-depth studies about morphological changes of the alveolar process and its immediate surroundings are missing. Therefore, the aim of the present study was to examine the treatment effects of a dentally anchored, rapid maxillary expander at different dentition stages upon palatal width, height and shape.

Material and methods

The dental casts of 114 patients—taken immediately before and after RME—were three-dimensionally analysed. Depending on the dentition stage, the patients were divided into two groups (each n = 57, group 1, early mixed dentition; group 2, late mixed or permanent dentition).

Results

The width increases were highly significant, both in the overall and in the individual groups (p < 0.001). While the width increase was greater in the posterior area than anteriorly in the early group, the widening in the late group happened significantly greater anteriorly than posteriorly. Palatal height increased anteriorly and posteriorly in both groups to a significant extent (p < 0.001). The height increase was more pronounced in the anterior region than in the posterior region in the late group. The palatine index according to Kim revealed a change in palatal morphology both anteriorly and posteriorly in the early group but only anteriorly in the late group.

Conclusions

Maxillary expansion occurs more parallel in early treatment compared to V-shaped opening in the later treatment approach.

Clinical relevance

RME is more advantageous in an early dentition.

Miniscrew-Assisted Rapid Palatal Expansion (MARPE): An Umbrella Review

In postpubertal patients, maxillary transverse discrepancy is a common condition often requiring surgical approaches. To overcome the excess morbidity and discomfort, maxillary expansion through miniscrew-assisted rapid palatal expansion (MARPE) was proposed and studied in the last few years. This umbrella review aims to critically appraise the quality of evidence and the main clinical outcomes of available systematic reviews (SRs) on MARPE. An extensive search was carried out in five electronic databases (PubMed-Medline, Cochrane Database of SRs, Scielo, Web of Science, and LILACS) until December 2021. The methodological quality was appraised using the A Measurement Tool to Assess SRs criteria 2 (AMSTAR2). The primary outcome was the methodological quality of SRs. Overall, four SRs were included and analyzed, one of high methodological quality, one of low and two of critically low. Despite the verified methodological constraints, MARPE seems to present significant clinical changes when compared to conventional RPE, SARPE or controls and less adverse clinical outcomes. The quality of evidence produced by the available SRs was not favorable. Future high standard SRs and well-designed clinical trials are warranted to better clarify the clinical protocols and outcomes success of MARPE.

Three-dimensional craniofacial changes with maxillary expansion in young adult patients with different craniofacial morphology

Objectives:

Skeletally mature patients with transverse deficiency are best treated with surgically assisted rapid palatal expansion (RPE) procedure. Recent studies have shown that microimplant-assisted RPE (MARPE) appliances can be effective in achieving skeletal expansion in young adults. This retrospective study aimed to evaluate the skeletal and dental alveolar changes in response to treatment with MARPE appliances in three types of anteroposterior skeletal malocclusions using cone-beam computed tomography (CBCT) scans.

Material and Methods:

Seventy-eight subjects diagnosed with maxillary transverse deficiency and treated with the MARPE appliance (mean age of 22.9 ± 4.2 years) were divided into skeletal Class I, II, and III malocclusions with 26 subjects in each group. Pre- and post-treatment CBCT scans were used for superimposition to examine the skeletal and dentoalveolar changes following maxillary expansion treatment.

Results:

Significant lateral separation of the maxilla was found at the levels of the nasal floor, interzygomatic bones, and the inferior palatine margin of the alveolar process (P < 0.05) in the whole sample. Most of the sagittal and vertical variables change significantly in the whole sample and each studied group separately. Intergroup comparisons revealed no significant differences among the three skeletal classes except for the left frontozygomatic angle, left maxillary inclination angle, and torque in the first and second premolars. In Class III patients, the maxilla moved forward significantly in most of the cases (eight of 26 cases) (0.88°, P < 0.05) and the mandible moved downward and backward improving the anteroposterior skeletal relationship. Significant differences were also found in the vertical measurements (N-Me, MMP, and MP/SN, P < 0.05) in all three types of anteroposterior malocclusions.

Conclusion:

Maxillary expansion with the MARPE appliance in young adult patients induced different skeletal and dentoalveolar changes in the anteroposterior and vertical dimensions in each skeletal malocclusion with no significant difference among the three skeletal classes.

Class II treatment of transverse maxillary deficiency with a single bone-borne appliance and hybrid clear aligner approach in an adult patient: A case report

This case report describes the successful orthodontic treatment of a 22-year-old female patient affected by Class II malocclusion, maxillary skeletal transverse deficiency, ectopic maxillary left lateral incisor, and mild mandibular crowding. Due to her adult skeletal age, a bone-borne appliance was applied in order to obtain both purely skeletal rapid maxillary expansion and bilateral molar distalization. After accurate matching between the pretreatment cone-beam computed tomography scan and digital models, 4 self-drilling miniscrews were inserted palatally using a computer-aided design and computer-aided manufacturing (CAD/CAM) surgical template to guide their correct and safe placement, and a bone-borne appliance was fitted. After this first phase, the hybrid clear aligner approach was used to obtain alignment, levelling, and arch coordination, with the use of a partial lingual fixed appliance on the maxillary incisors.

Age-dependent effects of transverse maxillary deficiency treated by microimplant-assisted rapid palatal expansion: A prospective cone-beam computed tomography study

INTRODUCTION

This study investigated the results of maxillary discrepancy treated by microimplant-assisted rapid palatal expansion (MARPE) at different ages.

METHODS

Sixty patients (aged 11.0-34.1 years; 23 male and 37 female) were treated by MARPE. Cone-beam computed tomography scans and dental casts were taken before and after expansion. The data were compared among 4 age groups: early adolescents (aged 11-14 years), late adolescents (aged 15-19 years), young adults (aged 20-24 years), and old adults (aged 25-34.1 years).

RESULTS

The success rates of midpalatal suture separation were 100%, 100%, 88.2%, and 85.7% for early adolescents, late adolescents, young adults, and old adults, respectively. Palatal sutures at the level of the first molar were expanded by 4.02 mm, 3.48 mm, 2.63 mm, and 2.10 mm, corresponding to 66.7%, 58.1%, 42.0%, and 37.9% of the total dental expansion. Significant differences were found in the amounts of palatal suture expansion and the ratio of skeletal dental expansion between patients aged <20 years and patients aged ≥20 years (P <0.05). Skeletal expansion constituted 69.4%, 51.3%, 39.0%, and 29.8% of the total screw expansion. Except for the comparison between young adults and old adults, there were significant differences between groups for the ratio of skeletal screw expansion (P <0.05).

CONCLUSIONS

The midpalatal suture can be expanded by MARPE more easily in patients <20 years of age than in patients ≥20 years of age. The ratio of skeletal screw expansion decreases as age increases.

Short-term effects of microimplant-assisted rapid palatal expansion on the circummaxillary sutures in skeletally mature patients: A cone-beam computed tomography study

INTRODUCTION

This study aimed to investigate the short-term effects on the circummaxillary sutures induced by microimplant-assisted rapid palatal expansion (MARPE) in skeletally mature patients.

METHODS

Cone-beam computed tomography (CBCT) images of preexpansion (T0) and postexpansion (T1) of 23 patients (mean age, 20.9 ± 3.65 years) treated with MARPE were evaluated. The T0 and T1 CBCT images were reoriented and superimposed on the basis of the anterior cranial base, using OnDemand3D software (Cybermed, Seoul, Korea). Then, width changes of 9 circummaxillary sutures (frontonasal, frontomaxillary, frontozygomatic, nasomaxillary, zygomaticomaxillary, intermaxillary, midpalatal, zygomaticotemporal, and pterygopalatine sutures) were measured on 1 section of each patient's T0 and T1 CBCT images. In addition, correlation coefficients between changes in the midpalatal sutures, the amount of appliance activation, age, and the changes in other circummaxillary sutural widths were also calculated.

RESULTS

Statistically significant (P <0.05) width increases were found in all 9 circummaxillary sutures. The changes in midpalatal suture at the maxillary central incisor level positively correlated with the intermaxillary sutures at the anterior nasal spine level, midpalatal sutures at the posterior nasal spine level, and frontomaxillary sutures (P <0.05). In addition, the changes in the midpalatal sutures at the posterior nasal spine level also positively correlated with the changes in the intermaxillary sutures at the anterior nasal spine level, frontomaxillary sutures, and medial pterygopalatine sutures (P <0.05).

CONCLUSIONS

All 9 circummaxillary sutural widths increased in skeletally mature patients immediately after MARPE. The greatest increases in width were measured in the midpalatal sutures and the intermaxillary sutures, followed by the frontomaxillary sutures.

Evaluation of symmetry behavior of surgically assisted rapid maxillary expansion with simulation-driven targeted bone weakening

OBJECTIVES

Surgically assisted rapid maxillary expansion (SARME) is a treatment modality to overcome maxillary constrictions. During the procedure of transverse expansion, unwanted asymmetries can occur. This retrospective study investigates the transverse expansion behavior of the maxilla utilizing a simulation-driven SARME with targeted bone weakening.

MATERIALS AND METHODS

Cone beam computer tomographies of 21 patients before (T1) and 4 months after treatment (T2) with simulation-driven SARME combined with a transpalatal distractor (TPD) and targeted bone weakening were superimposed. The movements of the left, right, and frontal segments were evaluated at the modified WALA ridge, mid root level, and at the root tip of all upper teeth. Linear and angular measurements were performed to detect dentoalveolar changes.

RESULTS

Dentoalveolar changes were unavoidable, and buccal tipping of the premolars (6.1° ± 5.0°) was significant (p < 0.05). Transverse expansion in premolar region was higher (6.13 ± 4.63mm) than that in the molar region (4.20 ± 4.64mm). Expansion of left and right segments did not differ significantly (p > 0.05).

CONCLUSION

Simulation-driven SARME with targeted bone weakening is effective to achieve symmetrical expansion in the transverse plane.

CLINICAL RELEVANCE

Simulation-driven targeted bone weakening is a novel method for SARME to achieve symmetric expansion. Dental side effects cannot be prohibited.

The success and effectiveness of miniscrew-assisted rapid palatal expansion are age- and sex-dependent

OBJECTIVES

This study aimed to assess the success rate and the amount of suture separation after the miniscrew-assisted rapid palatal expansion (MARPE) procedure in relation to the chronological age and sex of the patients.

MATERIALS AND METHODS

The periapical radiographs of 215 subjects (95 male; 120 female; range, 6-60 years) who had undergone MARPE treatment were retrospectively analyzed. The success of suture separation was determined and, in suture-separated subjects, the amount of suture separation was evaluated by suture separation ratio calculated from the periapical radiograph obtained after active expansion. Association tests were performed using linear-by-linear association, the Jonckheere-Terpstra test, Fisher's exact test, and the Mann-Whitney U test, and linear regression models were also developed.

RESULTS

The success rate of suture separation was 61.05% in male, 94.17% in female, and 79.53% in both sexes. There was a statistically significant association between older age and suture nonseparation in male (p < 0.001), but not in female (p = 0.221). In suture-separated subjects, there was a statistically significant trend toward a low amount of suture separation with older age subgroups in both sexes (p < 0.001); however, there was no statistically significant difference in the amount of suture separation between male and female in all age subgroups.

CONCLUSIONS

Older patients treated with MARPE, particularly in male, may have a reduced likelihood of both success in suture separation and sufficient basal bone expansion.

CLINICAL RELEVANCE

This study demonstrates that clinicians should consider that the success rate of MARPE and the amount of suture separation may depend on chronological age and sex.

Digital Planning and Manufacturing of Maxillary Skeletal Expander for Patients with Thin Palatal Bone

The miniscrew-assisted rapid palatal expansion approach has given new opportunities for the treatment of maxilla transverse deficiency by providing an alternative to the surgical approach for adult patients. However, the presence of a thin palatal bone can compromise the success of such approach. Recently, the digital planning of the miniscrew-assisted appliances has offered unique advantages in terms of safety and accuracy of the overall process. The aim of this study is to describe the digital planning and MSE fabrication with cad-cam technology using 6 mini-screws in cases with a palatal bone thickness of less than 2.5 mm.

Midpalatal suture density ratio after rapid maxillary expansion evaluated by cone-beam computed tomography

INTRODUCTION

Identifying the stage of midpalatal suture (MPS) fusion is essential for rapid maxillary expansion (RME). The objective of this study was to evaluate the relationship between MPS density ratio and the skeletal response after RME using cone-beam computed tomography (CBCT).

METHODS

CBCT scans of 64 patients (age, 13.81 ± 1.68 years; 42 females and 22 males) who underwent RME as part of comprehensive orthodontic treatment were used for this study. Two CBCT records were made at T1 (pre-RME) and T2 (post-RME). MPS density was assessed by gray scale and the skeletal effects through linear measurements: greater palatine foramina, the width of the nasal cavity (NW), infraorbital foramina. The data were collected at 4 different times: baseline, 24 hours, 48 hours, and 4 weeks.

RESULTS

There was no statistically significant correlation between MPS density ratio and greater palatine foramina or infraorbital foramina. Negative correlations with MPS density ratio are presented with the difference of age post-RME and pre-RME (r = -0.46, P = 0.033) in males, and NW (r = -0.41, P = 0.007) in females. A significant association between gender and the MPS density ratio was found (P = 0.015) in females.

CONCLUSIONS

There is a weak negative correlation between the MPS density ratio and the difference of age post-RME and pre-RME in males and the NW in females. Females presented greater density ratios than males. MPS density ratio through CBCT does not appear to be an adequate parameter to predict the skeletal effect in adolescent patients and young adults.

Voice changes after surgically assisted rapid maxillary expansion

INTRODUCTION

This study aimed to investigate voice changes in patients who had surgically assisted rapid maxillary expansion (SARME).

METHODS

Nineteen adult patients with maxillary transverse deficiency were asked to pronounce the sounds "[a], [ϵ], [ɯ], [i], [ɔ], [œ] [u], [y]" for 3 seconds. Voice records were taken before the expansion appliance was placed (T0) and 5.8 weeks after removal (T1, after 5.2 months of retention). The same records were taken for the control group (n = 19). The formant frequencies (F0, F1, F2, and F3), shimmer, jitter, and noise-to-harmonics ratio (NHR) parameters were considered with Praat (version 6.0.43).

RESULTS

In the SARME group, significant differences were observed in the F1 of [a] (P = 0.005), F2 of [ϵ] (P = 0.008), and [œ] sounds (P = 0.004). The postexpansion values were lower than those recorded before. In contrast, the F1 of [y] sound (P = 0.02), F2 of [u] sound (P = 0.01), the jitter parameter of [ɯ] and [i] sounds (P = 0.04; P = 0.002), and the NHR value of [ϵ] sound (P = 0.04) were significantly than the baseline values. In the comparison with the control group, significant differences were found in the F0 (P = 0.025) and F1 (P = 0.046) of the [u] sound, the F1 of the [a] sound (P = 0.03), and the F2 of the [ϵ] sound (P = 0.037). Significant differences were also found in the shimmer of [i] (P = 0.017) and [ɔ] (P = 0.002), the jitter of [ϵ] (P = 0.046) and [i] (P = 0.017), and the NHR of [i] (P = 0.012) and [ɔ] (P = 0.009).

CONCLUSION

SARME led to significant differences in some of the acoustics parameters.

Maturity evaluation of orthodontically important anatomic structures with computed tomography

BACKGROUND/OBJECTIVES

The success of the orthopaedic treatment is closely related to the patient's skeletal maturation. This study aimed to evaluate the midpalatal suture (MPS), the zygomaticomaxillary suture (ZMS) maturation, and the closure degree of the spheno-occipital synchondrosis (SOS) in patients of different age groups. The presence of a correlation between these parameters and the palatal dimensions was also verified.

SUBJECTS/METHODS

The study was based on computed tomography images of 314 patients between 7 and 30 years of age with no orthodontic treatment history. The images were retrieved from the archive of the Radiology Department of Bezmialem Vakif University Hospital and divided into six groups according to the patient's age: 7-10, 11-13, 14-16, 17-20, 21-25, and 26-30 years. The maturation scores of ZMS, SOS, and MPS were determined, and palatal thickness and length were recorded. The data were analysed by using Statistical Package for Social Sciences for Windows 22.0.

RESULTS

A positive relationship was found between SOS closure degree and MPS/ZMS maturation (MPS-ZMS: r = 0.816, MPS-SOS: r = 0.736, ZMS-SOS: r = 0.868, P = 0.000). The degrees of ZMS and MPS maturation were significantly increased as the SOS closure degree increased. The MPS maturation score was significantly lower in patients with a short and thick palate (MPS-palatal thickness: r = 0.405, MPS-palatal length: r = 0.387, P = 0.000).

CONCLUSIONS

A positive correlation indicated the simultaneous progress in the maturation of the SOS, MPS, and ZMS. Moreover, the ANS-PNS length increase was found to be correlated with the increase of the MPS, ZMS, and SOS maturation scores. In contrast, a negative correlation was observed between the palatal thickness and the maturation stage of these structures.

Treatment effect of bone-anchored maxillary protraction in growing patients compared to controls: a systematic review with meta-analysis

OBJECTIVE

The aim of this systematic review was to determine which evidence level supports maxillary advancement after bone-anchored maxillary protraction (BAMP) in growing patients compared to controls.

SEARCH METHODS

PubMed, Cochrane, Embase, Scopus, and Web-of-Science databases were searched with no restrictions on publication status or year.

SELECTION CRITERIA

Prospective and retrospective human studies about BAMP, in at least three patients, were included. Authors were contacted when necessary, and reference lists of the included studies were screened.

DATA COLLECTION AND ANALYSIS

Two authors undertook independent data extraction with conflict resolution by a third author. Risks of bias were assessed. A meta-analysis for estimates of changes for ANB angle, Wits appraisal, and incisor to mandibular plane angle (IMPA) angle of BAMP treatment compared to control groups was performed.

RESULTS

A total of 449 articles were initially retrieved; 28 full-text articles met the inclusion criteria. Sample sizes ranged from 3 to 52 patients. There was heterogeneity in cephalometric outcomes reported, which prevented the comparison of certain outcomes. ANB angle improved more with BAMP in the maxilla combined with facemask (bone-anchored facemask, BAFM) compared to traditional facemask therapy: this was statistically but not clinically significant (0.2 degrees). No data are available for BAMP with skeletal anchorage in both jaws in combination with Class III elastics (bone-anchored Class III elastics, BAC3E). Likewise, no statistically significant differences in Wits appraisal were found (less than 1 mm). Lower incisor retroclination and facial height seemed to be better controlled with BAC3E compared to BAFM.

CONCLUSIONS

The level of evidence available to support the maxillary advancement effect after BAMP was low. Publications reporting results based on identical samples tended to suggest overly positive results of BAMP. The differences in sagittal correction between BAMP and traditional facemask therapy were small and of questionable clinical significance. Long-term follow-up results are not available and, therefore, much needed.

LIMITATIONS

Most articles had a low level of evidence and some included a historical control group.

REGISTRATION

PROSPERO database number CRD42015023366.

Tomographic analysis of midpalatal suture prior to rapid maxillary expansion

INTRODUCTION

In Orthodontics and Facial Orthopedics, the timing of treatment onset may be critical and individual analysis should be applied to promote a favorable treatment planning. In this study, individual analysis of midpalatal suture (MS) and palatal measurements were performed in teenagers and young adult patients treated with rapid maxillary expansion (RME).

DESCRIPTION

Twenty-six patients submitted to RME with a tooth-supported appliance (Hyrax) were evaluated. The inclusion criteria were: minimum age of 14 years, presenting all posterior teeth, diagnosed with transverse maxillary discrepancy, and with a clinical indication for maxillary expansion. The pretreatment CBCT scans of these patients were assessed to obtain the stages of MS maturation (MSM); density ratio (MSD); and palatal length, thickness (anterior, intermediate and posterior) and sagittal area.

RESULTS

The maturation stages present were C, D or E; the density ranged from 0.6 to 1, and lower density (MSD < 0.75) and higher density (MSD ≥ 0.75) groups were determined. Individuals with higher MSD presented smaller sagittal area, compared to the lower density group. Individuals in D and E MSM stages presented smaller sagittal area and intermediate thickness, compared to stage C.

CONCLUSIONS

Smaller palatal sagittal area was observed in the high MSD groups and in the stages D and E of MSM.

Factors related to maxillary expander loss due to anchoring deciduous molars exfoliation during treatment in the mixed dentition phase

OBJECTIVES

The aim was to identify factors associated with maxillary expander loss due to anchoring deciduous molars exfoliation and assess the diagnostic accuracy of the upper second premolar cusp position as a prognostic factor for the exfoliation of its corresponding deciduous molar.

MATERIALS/METHODS

Ninety-two subjects aged 8.4 ± 1.1 years, treated with a Haas or hyrax expander, and using the same expansion protocol and deciduous teeth as anchorage were included. The position of the upper second premolar cusp, according to the half pulp chamber (HPC) line of the ipsilateral upper first permanent molar, was assessed on pre-treatment panoramic radiographs.

RESULTS

A significant association between anchoring deciduous molar exfoliation and the position of the upper second premolar cusp according to the HPC line (P = 0.002; odds ratio = 5.7) was seen, while there was no association with gender, age, treatment duration, and type of expander. The median survival time for an anchoring deciduous molar, when the underlying premolar cusp was touching/crossing the HPC line, was 13.0 (11.7; 14.2) months. The upper second premolar cusp position to the HPC line showed high accuracy (at least 76.11 per cent) and substantial repeatability (at least 0.7) as a prognostic factor for the corresponding second deciduous molar exfoliation.

LIMITATIONS

Applicability in the mixed dentition phase with fully erupted upper first permanent molars.

CONCLUSIONS

The probability of a second deciduous molar to be successfully used as maxillary expander anchorage for at least 16 months is above 94 per cent; when at baseline, the corresponding premolar cusp is apical to the HPC line.

Evaluation of the Relationship Between Midpalatal Suture Maturation Indicators as Predictors for Surgically-Assisted and Conventional Rapid Maxillary Expansion

ABSTRACT

Rapid maxillary expansion (RME) is an effective orthopedic procedure to correct maxillary transversal deficiency in young patients. In cases of sutural closure, surgically assisted RME is used to reduce the resistance to sutural disjunction. Foundation of a diagnostic relationship between maturation indices and the expected skeletal response to expansion can enable clinicians to identify the need for surgically assisted RME prospectively. The primary aim of this study was to assess the correlation between the amount of achieved skeletal expansion with midpalatal suture density on computed tomography images, and the secondary aim was to assess the correlation between the amount of achieved skeletal expansion with the recently suggested midpalatal suture maturation indicators: cervical vertebral maturation (CVS), midpalatal suture maturation stage (MPSM) and midpalatal suture density ratio. Forty Digital Imaging and Communications in Medicine data from the archived computed tomography scans of 20 patients (mean age: 15.55 years) before RME (T1) and after 3-month retention period (T2) were analyzed. The tested maturity indicators did not show statistically significant correlation between the skeletal effect proportions. However, clinically and radiologically effective RME was seen in MPSMs A, B, and C and also cervical vertebra stages CVS5 and CVS6. More research is needed to determine a diagnostic predictor for the skeletal effects of maxillary expansion treatment modalities.

Nonsurgical maxillary expansion in a 60-year-old patient with gingival recession and crowding

Maxillary transverse deficiency often manifests as a posterior crossbite or edge-to-edge bite and anterior crowding. However, arbitrary arch expansion in mature patients has been considered to be challenging due to the possible periodontal adverse effects such as alveolar bone dehiscence and gingival recession. To overcome these limitations, nonsurgical maxillary expansion of the basal bone has been demonstrated in young adults. However, the age range for successful orthopedic expansion has remained a topic of debate, possibly due to the underlying individual variations in suture maturity. This case report illustrates nonsurgical, miniscrew-assisted rapid palatal expansion (MARPE) in a 60-year-old patient with maxillary transverse deficiency accompanied by anterior and posterior crossbites, crowding, and gingival recession. The use of MARPE allowed relief of crowding and correction of the crossbite without causing significant periodontal adverse effects.

Exploring directional and fluctuating asymmetry in the human palate during growth

Objectives

Palate morphology is constantly changing throughout an individual's lifespan, yet its asymmetry during growth is still little understood. In this research, we focus on the study of palate morphology by using 3D geometric morphometric approaches to observe changes at different stages of life, and to quantify the impact of directional and fluctuating asymmetry on different areas at different growth stages.

Materials and Methods

The sample consists of 183 individuals (1–72 years) from two identified human skeletal collections of 19th and early 20th Century Italian contexts. A 3D‐template of 41 (semi)landmarks was applied on digital palate models to observe morphological variation during growth.

Results

Asymmetrical components of the morphological structure appears multidirectional on the entire palate surface in individuals <2 years old and become oriented (opposite bilateral direction) between 2 and 6 years of age. Specifically, directional asymmetry differentially impacts palate morphology at different stages of growth. Both the anterior and posterior palate are affected by mild alterations in the first year of life, while between 2 and 6 years asymmetry is segregated in the anterior area, and moderate asymmetry affects the entire palatal surface up to 12 years of age. Our results show that stability of the masticatory system seems to be reached around 13–35 years first by females and then males. From 36 years on both sexes show similar asymmetry on the anterior area. Regarding fluctuating asymmetry, inter‐individual variability is mostly visible up to 12 years of age, after which only directional trends can be clearly observed at a group level.

Discussion

Morphological structure appears instable during the first year of life and acquires an opposite asymmetric bilateral direction between 2 and 6 years of age. This condition has been also documented in adults; when paired with vertical alteration, anterior/posterior asymmetry seems to characterize palate morphology, which is probably due to mechanical factors during the lifespan. Fluctuating asymmetry is predominant in the first period of life due to a plausible relationship with the strength of morphological instability of the masticatory system. Directional asymmetry, on the other hand, shows that the patterning of group‐level morphological change might be explained as a functional response to differential inputs (physiological forces, nutritive and non‐nutritive habits, para‐masticatory activity as well as the development of speech) in different growth stages. This research has implications with respect to medical and evolutionary fields. In medicine, palate morphology should be considered when planning orthodontic and surgical procedures as it could affect the outcome. As far as an evolutionary perspective is concerned the dominance of directional asymmetries in the masticatory system could provide information on dietary and cultural habits as well as pathological conditions in our ancestors.

Microimplant assisted rapid palatal expansion vs surgically assisted rapid palatal expansion for maxillary transverse discrepancy treatment

INTRODUCTION

This study compared the skeletal and dental changes of microimplant assisted rapid palatal expansion (MARPE) with those produced by surgically assisted rapid maxillary expansion (SARPE) in postpeak adolescents and adults.

METHODS

The sample comprised 17 patients (mean age, 26 ± 11 years) selected for the MARPE group and 15 (mean age, 28.5 ± 10.5 years) selected for the SARPE group. Cone-beam computed tomography scans taken just before and after the expansion were used to assess dental and skeletal changes and compare the changes between the groups.

RESULTS

MARPE showed greater transversal skeletal changes in the midface and posterior and anterior maxillary base measurements. The transverse displacement of the alveolar process was greater but not significant for the SARPE group than the MARPE group. Regarding dental effects, the root distance measurements did not differ between the groups, but SARPE produced a significantly greater increase in intermolar and interpremolar distance and a greater buccal inclination of the alveolar process and supporting teeth than MARPE.

CONCLUSIONS

The MARPE technique showed an increase in skeletal transverse maxillary expansion at the midface and basal bone compared with SARPE, especially at the posterior palatal region; however, no difference was found in the expansion of the alveolar process between the 2 methods. MARPE presented a more parallel expansion in both a coronal and axial view, whereas SARPE led to a V-shaped opening. The greater buccal inclination of the alveolar process and supporting teeth was observed in the SARPE group.

Palatal bone thickness at the implantation area of maxillary skeletal expander in adult patients with skeletal Class III malocclusion: a cone-beam computed tomography study

Background

Maxillary skeletal expanders (MSE) is effective for the treatment of maxillary transverse deformity. The purpose of the study was to analyse the palatal bone thickness in the of MSE implantation in patients with skeletal class III malocclusion.

Methods

A total of 80 adult patients (40 males, 40 females) with an average angle before treatment were divided into two groups, the skeletal class III malocclusion group and the skeletal I malocclusion group, based on sagittal facial type. Each group consisted of 40 patients, with a male to female ratio of 1:1. A cone-beam computed tomography scanner was employed to obtain DICOM data for all patients. The palatal bone thickness was measured at 45 sites with MIMICS 21.0 software, and SPSS 22.0 software was employed for statistical analysis. The bone thickness at different regions of the palate in the same group was analysed with one-way repeated measures ANOVA. Fisher’s least significant difference-t method was used for the comparison of pairs, and independent sample t test was employed to determine the significance of differences in the bone thickness at the same sites between the two groups.

Results

Palatal bone thickness was greater in the middle region of the midline area (P < 0.01), while the thickness in the middle and lateral areas in both groups was generally lower (P < 0.001). The bone in the anterior, middle, and posterior regions of the two groups became increasingly thin from the middle area toward the parapalatine region. The palatal bone was significantly thinner in the area 9.0 mm before the transverse palatine suture in the midline area, 9.0 mm before and after the transverse palatine suture in the middle area, and 9.0 mm after the transverse palatine suture in the lateral area.

Conclusion

The palatal bone was thinner in patients with class III malocclusion than in patients with class I malocclusion, with significant differences in some areas. The differences in bone thickness should be considered when MSE miniscrews are implanted. The anterior and middle palatal areas are safer for the implantation of miniscrews, while the thinness of the posterior palatal bone increases the risk of the miniscrews falling off and perforating.

[Chinese morphological stages of midpalatal suture and its correlation with Demirjian dental age]

OBJECTIVE

To investigate the correlation between morphological stages of midpalatal suture (MPS) and Demirjian dental age.

METHODS

In this retrospective study, 1 076 cone-beam CT (CBCT) images (female: 675, male: 401; age range: 6.0 to 21.0 years) were included. Horizontal view of each sample's CBCT images was observed, each sample's MPS stage was recorded, and dental age. MPS stage and dental age were ordered with categorical variables. Therefore, their correlation was investigated through Spearman correlation coefficient analysis and diagnostic test analysis.

RESULTS

(1) For left lower second premolar: 95.2% of those in dental age stage B-D were in MPS 1-2, accounting for the largest proportion. 85.3% of those in dental age stage E were in MPS 1-2, still accounting for the largest proportion. Another 14.7% were in MPS 3.45.1% of those in dental age stage F were in MPS 3, 46.1% in MPS 1-2, and another 8.8% in MPS 4s1.49.8% of those in dental age stage G were in MPS 3.24.9% in MPS 4s1, and 18.9% in MPS 1-2.80.1% of those in dental age stage H were in MPS 4-5. Another 16.3% were in MPS 3. (2) For left lower second molar: 89.7% of those in dental age stage B-D were in MPS 1-2, accounting for the largest proportion. 67.4% of those in dental age stage E were in MPS 1-2, still accounting for the largest proportion. Another 26.1% were in MPS 3.55.3% of those in dental age stage F were in MPS 3, 34.2% in MPS 1-2, and another 10.5% in MPS 4s1.50.7% of those in dental age stage G were in MPS 3, 24.3% in MPS 4s1, and 16.8% in MPS 1-2.83.8% of those in dental age stage H were in MPS 4-5, another 14.2% were in MPS 3. (3) To diagnose MPS stage with dental age, diagnostic pairs with good performance included: Dental age of left lower second molar-MPS: H-4s2, H-5, D-1; Dental age of left lower second premolar-MPS: H-4s2, H-5, G-3. Other diagnostic pairs were of ordinary diagnostic efficiency. (4) For dental age-MPS Spearman correlation analysis, dental age of left lower second molar-MPS had the highest Spearman coefficient (0.68), dental age of left lower second premolar-MPS was the second high (0.64). (5) Dental age stage H of left lower second molar or left lower second premolar indicated that the individual was later than MPS 4s2.

CONCLUSION

Dental age's diagnostic efficiency for MPS stage is ordinary on the whole, except for some pairs with good performance. Therefore, pre-treatment CBCT examination should be considered as assistance for evaluating maturation and fusion status of midpalatal suture.

The Impact of Maxillary Expansion on Adults' Nasal Breathing: A Systematic Review and Meta-Analysis

OBJECTIVE

Nasal surgery fails to restore nasal breathing in some cases. Maxillary constriction is suggested as a major cause of failure. It is thought that maxillary constriction leads to the closure of the internal and external nasal valves. Moreover, it is well established in the literature that maxillary expansion, both in adults and children, increases upper airway volume. However, it is yet unclear whether maxillary expansion may improve nasal function.Review Methods: Pubmed (Medline), the Cochrane Library, EMBASE and Trip Database were checked by two authors from the Rhinology Study Group of the Young Otolaryngologists section of the International Federation of Otorhinolaryngological Societies. Two authors extracted the data. The main outcome was expressed as the value (in variable units) prior to treatment (T0), after expansion procedures (T1), after the retention period (T2), and after a follow-up period (T3).

RESULTS

A total of 10 studies (257 patients) met the inclusion criteria. The data pooled in the meta-analysis reveals a statistically significant reduction of 0.27 Pa/cm³/s (CI 95% 0.15, 0.39) in nasal resistance after palatal expansion As far as subjective changes are concerned, the pooled data for the change in the NOSE score shows a statistically significant mean reduction after maxillary expansion of 40.08 points (CI 95% 36.28, 43.89).

CONCLUSION

The initial available evidence is too limited to suggest maxillary expansion as a primary treatment option to target nasal breathing. However the data is encouraging with regards to the effect of maxillary expansion on nasal function. Further higher quality studies are needed in order to define clearer patient selection criteria, distinguish optimal techniques, and demonstrate long-term efficacy in long term follow up studies.

Evaluation of the suture ossification level according to age and sex in children, adolescents, and adults. A cross-sectional and observational 3D study

OBJECTIVE

To determine the ossification level of the midpalatal suture (MPS) in children, adolescents and adults from a Peruvian sample; according to the method proposed by Angelieri et al. with cone-beam computed tomographies (CBCTs).

MATERIAL AND METHODS

The sample consisted of 315 CBCTs of 168 females and 147 males. The total sample was divided into 3 groups according to age and sex: children (n=77), adolescents (n=113) and adults (n=125). The images were mainly assessed in the axial plane using the Real Scan 2.0 software. The different periods of ossification of the MPS at the level of the vertical half of the palate was defined according to the five stages of Angieleri method (from A to E). The Student t-Test, Chi-square test, Kruskal-Wallis test and Spearman's Rho test were applied.

RESULTS

Chi² test results showed that the stages of MPS ossification depended on the age of the patient by age ranges (P<0.005). Multiple comparison tests affirmed that male and female subjects in the children group had fewer ossification stages than the adolescent and adult groups (P<0.001). Meanwhile, there were no statistically significant differences between the two older age groups. Finally, there was a moderate positive correlation between the stages of ossification of the MPS and the age in the male group (Rho=0.511).

CONCLUSIONS

The onset of MPS ossification was significantly related to subjects up to 12 years of age and more frequently in stages B and C in both sexes. There was no difference in MPS ossification in adolescents and adult subjects.

Anteroposterior length of the maxillary complex and its relationship with the anterior cranial base

OBJECTIVES

To use both absolute anteroposterior maxillary complex length (APMCL) and relative APMCL to investigate the relationship between the maxillary complex, its individual bony segments, and their association to the anterior cranial base. In addition, the relationship between length and position of the maxillary complex was analyzed.

MATERIALS AND METHODS

Sixty human skulls were analyzed using cone beam computed tomography. The maxillary complex length was measured between anterior and posterior nasal spine (ans-pns), and the average was used as the cut-off to identify a high- and a low-length group based on absolute APMCL. The length ratio between the maxillary complex and the anterior cranial base (ans-pns/SN) was used to identify the two groups based on relative APMCL. The anterior cranial base length and the lengths of the maxillary complex bones were compared between the high- and low-length groups.

RESULTS

Based on absolute APMCL, individuals with shorter maxillary complex had shorter anterior cranial base (P = .003), representing normal proportions. Based on relative APMCL, individuals with shorter maxillary complex had longer anterior cranial base and vice versa (P = .014), indicating disproportions. Individuals with shorter maxillary complex exhibited shorter maxilla (Δ = -1.5 mm, P = .014).

CONCLUSIONS

When skeletal deformity of the midface is suspected, individual disproportions in the anteroposterior length of the maxillary complex in relation to the anterior cranial base (relative measurements) should be assessed through radiological imaging. A shorter maxillary complex may be associated with a shorter maxilla, and not with a shorter premaxilla or palatine bone.

Comparison of skeletal maxillary transverse deficiency treated by microimplant-assisted rapid palatal expansion and tooth-borne expansion during the post-pubertal growth spurt stage

OBJECTIVE

To investigate the efficacy of microimplant-assisted rapid palatal expansion (MARPE) to treat skeletal maxillary discrepancies during the post-pubertal growth spurt stage.

MATERIALS AND METHODS

Sixty patients with skeletal maxillary transverse deficiency during the post-pubertal growth spurt stage were randomly divided into MARPE and Hyrax groups. Thirty patients (mean age: 15.1 ± 1.6 years) were treated using the four-point MARPE appliance; 30 patients (mean age, 14.8 ± 1.5 years) were treated using the Hyrax expander. Cone beam computed tomography scans and dental casts were obtained before and after expansion. The data were analyzed using paired t-tests and independent t-tests.

RESULTS

The success rates of midpalatal suture separation were 100% and 86.7% for MARPE and Hyrax groups, respectively. Palatal expansion and skeletal to dental ratio at the first molar level were greater in the MARPE group (3.82 mm and 61.4%, respectively) than in the Hyrax group (2.20 mm and 32.3%, respectively) (P < .01). Reductions in buccal alveolar bone height and buccal tipping of the first molars were less in the MARPE group than in the Hyrax group (P < .01).

CONCLUSIONS

MARPE enabled more predictable and greater skeletal expansion, as well as less buccal tipping and alveolar height loss on anchorage teeth. Thus, MARPE is a better alternative for patients with skeletal maxillary deficiency during the post-pubertal growth spurt stage.

Midpalatal suture density ratio: Assessing the predictive power of a novel predictor of skeletal response to maxillary expansion

INTRODUCTION

Rapid maxillary expansion (RME) is a common orthodontic treatment to correct maxillary transverse deficiency; however, the inability to determine the precise timing of fusion of the midpalatal suture creates difficulty for clinicians to prescribe the appropriate treatment, surgical or nonsurgical expansion. The purpose of this study was to assess the predictive power of the midpalatal suture density ratio (MPSD) for a skeletal response to RME.

METHODS

Pre- and posttreatment cone-beam computed tomography scans were obtained from 78 orthodontic patients aged from 8 to 18 years treated with RME. MPSDs were calculated from pretreatment scans, and a prediction was made for the amount of skeletal expansion obtained at the level of the palate after comprehensive orthodontic treatment. Predicted values were compared with actual outcomes as assessed from posttreatment scans, followed by regression analyses to investigate correlations between MPSD and skeletal expansion and equivalence testing to analyze the performance of the predicted measurements.

RESULTS

The MPSDs were not statistically significantly (P >0.05) correlated with the amount of skeletal expansion achieved. In addition, the predicted skeletal expansion using MPSD was not statistically equivalent to the skeletal expansion achieved using an equivalence margin of ±0.05.

CONCLUSIONS

The results suggest that the MPSD obtained from pretreatment cone-beam computed tomography scans were not correlated well enough with the amount of skeletal expansion achieved to be an effective predictor of the amount of long-term skeletal expansion after RME.

A comparison of different osteotomy techniques with and without pterygomaxillary disjunction in surgically assisted maxillary expansion utilizing modified hybrid rapid maxillary expansion device with posterior implants: A finite element study

INTRODUCTION

The study aims to evaluate the effect of osteotomies with and without Pterygomaxillary disjunction (PMD) during Surgical Assisted Rapid Maxillary Expansion on the displacement pattern and stress distribution of Dental and Skeletal structures of the Nasomaxillary (NM) complex by a modified rapid maxillary expansion (RME) Hybrid appliance.

MATERIALS AND METHODS

A CT scan of a 20-year-old adult with maxillary constriction and the posterior bite was utilized for the restructuring of the finite element model. Five different meshed models were created individually with varying procedures of the osteotomy. A posteriorly anchored Hybrid-Hyrax appliance was utilized for RME. Groups included Group 0 - Control group without osteotomy; Group I - Only Midpalatal osteotomy; Group II - Only Subtotal Le fort I; Group III - Both Midpalatal and Subtotal Le fort I without PMD; Group IV - Midpalatal + subtotal Le fort I with bilateral PMD. The displacement pattern and stress distribution in all three dimensions were recorded and analyzed using analysis of variance and post-hoc Tukey test.

RESULTS

Group IV with PMD exhibited the highest stress dissipation and displacement of the skeletal and dental structures followed by Group III osteotomies. The highest stress concentration was at midpalatal suture (292 MPa) for Group III osteotomies. There is no statistical difference between Group III and Group IV osteotomies for many of the parameters measured (P > 0.05).

CONCLUSIONS

Posteriorly anchored Hybrid appliance without PMD is as effective as that with of PMD.

Deformation of the circummaxillary sutures during acute micro-implant assisted rapid palatal expansion and tooth-supported expansion: An ex vivo study

INTRODUCTION

This study aimed to assess and compare the deformation that develops in the circummaxillary sutures during activation of micro-implant assisted rapid palatal expander (MARPE) and tooth-supported expander (Hyrax) s, in the rapid maxillary expansion.

SETTINGS AND SAMPLE

7 pigs Sus Scrofa received custom-made MARPE (n = 3) and Hyrax (n = 4) appliances.

MATERIAL AND METHODS

The devices were activated 25 times with strain readings captured by strain gauges attached to the following regions: posterior midpalatal suture (MPS), maxilla-premaxilla suture (MPM), maxilla-zygomatic suture (MZ) and maxilla pterygoid-process suture (MPP). The intermolar distance and suture width were measured immediately before activation and at the 20th and 25th activation. ANOVA and Kruskal-Wallis test was applied.

RESULTS

The MARPE group presented greater MPS displacement in all measured regions, and one of the devices produced a significant opening (1.7 mm) in the posterior region. The accumulated tension in the MPS was higher compared to the other sutures (P < .05). A MARPE animal presented higher median tension in the MPS region (294.77με) compared to all other animals except one Hyrax animal (P < .05). Regarding the median tensions of the different activation intervals, the median tension measured during the 16th to 25th activation interval in the Hyrax group was lower than that measured during the first 8 activations, in both the MPS and MZ (P < .05).

CONCLUSIONS

MARPE expanders developed more constant tensions during all activations (MPS and MZ), while Hyrax showed lower tension in the 16th to 25th activation.

Persistent palatal hypertrophy associated with rapid maxillary expansion procedure: Report of a rare case

Maxillary transversal deficiency (MTD) is a common skeletal problem. If not treated on time, MTD evolve to a more complex malocclusion. This problem can affect facial growth and development. Rapid maxillary expansion (RME) procedure frequently used for the management. This technique is usually successful in young individuals but as the age advances and the articulations of the maxilla with surrounding facial bones get more rigid, it becomes ineffective. Undesirable side effects or results have been reported after use of RME in skeletally mature patients such as buccal tipping of posterior teeth, extrusion, periodontal tissue recession, fenestration of buccal cortex, necrosis of palatal tissue, failure in opening of midpalatal suture, pain, and relapse of expansion. Side effects of RME are often temporary and permanent damages are rarely seen. The aim of this report is to present the management of a permanent side effect of the RME procedure in a 13-year-old child.

Miniscrew-assisted rapid palatal expansion: A review of recent reports

The miniscrew-assisted rapid palatal expander (MARPE) has extended not only skeletal effects with fewer dental changes and but also the age limit of nonsurgical maxillary expansion treatment. Amid its gaining popularity in clinical orthodontics, our current understanding of treatment effectiveness, efficiency, and stability needs to be reassessed. In this review article, the authors have attempted to evaluate MARPE from various aspects with a focus on recent studies.

Efficient Distalization of Maxillary Molars with Temporary Anchorage Devices for the Treatment of Class II Malocclusion

Treatment of Class II malocclusion often requires maxillary molar distalization. However, when applying distalization forces on the maxillary molars, anchorage loss may occur in different degrees not only during molar distalization (such as distal tipping of maxillary molars and mesial movement and proclination of the anterior teeth) but also during the subsequent stage of anterior teeth retraction (such as mesial movement of maxillary molars). All these movements are considered as unwanted side effects, which diminish the clinical effectiveness of distalization. Miniscrew implants can be used as temporary anchorage devices (TADs) to enhance anchorage and, if properly used, to counterbalance the side effects. Among the different available systems, the TAD-supported amda® can be considered as a simple, noncompliant, minimally invasive, and very efficient approach that can be used for the comprehensive treatment of patients with Class II malocclusion not only to distalize the maxillary molars bodily without or with minimal distal tipping and without proclination of the anterior teeth but also in combination with full-fixed appliances to retract and intrude the anterior teeth.

Dental arch effects after early and later timed cervical headgear treatment-a randomized controlled trial

BACKGROUND

Cervical headgear (CH) is a commonly used orthodontic appliance and its dentoalveolar changes are known. However, the effects related to gender and timing have gained less attention.

OBJECTIVES

To examine dimensions of dental arches among children with Class II occlusion without posterior mandibular rotation according to timing of Kloehn-type CH treatment.

TRIAL DESIGN

Prospective, randomized, parallel-group controlled trial.

METHODS

Sixty-seven seven-year-old children with a Class II occlusion were included in the study. The children were randomized into two equal-size groups in 1:1 ratio by sealed-envelope randomization. The early group (EG, n = 33) was treated between T0 and T1 (26 months), right after eruption of the first maxillary molars. The late group (LG, n = 34) was treated between T1 and T2 (24 months). The children were treated with CH until normal Class I occlusion on first molars was achieved. Impressions for dental casts were taken from all participants at T0, T1, and T2. Blinding was applicable for outcome assessors. Changes in dental cast measurements were compared between the groups and genders using t-test, Mann-Whitney U-test, and repeated measures analysis of variance.

RESULTS

Of the children, 56 completed the study. The maxillary arch length and the transversal changes between the upper canines and upper first molars were significantly increased in EG at T0-T1 (P < 0.001). At T2, the transversal dimension between the upper first molars was larger (P < 0.05), and in the lower arch the mandibular arch length (P < 0.05) and the transversal dimension between the lower first molars (P < 0.01) were increased in EG males compared to LG males. No harms were encountered.

CONCLUSIONS

The male gender benefits most from early timing of the CH treatment, showing larger dimensions at the end of the follow-up. The results clearly indicated a wider and longer upper dental arch and spontaneous expansion of the lower dental arch after treatment.

CLINICAL REGISTRATION

NCT02010346.

Pulp blood flow and sensibility in patients with a history of dental trauma undergoing maxillary expansion

OBJECTIVES

To assess changes in pulp blood flow (PBF) and pulp sensibility (PS) in teeth of patients with a history of dental trauma undergoing maxillary expansion.

MATERIALS AND METHODS

Twenty-five patients requiring rapid maxillary expansion (RME) had the pulp status of their maxillary anterior teeth assessed using laser Doppler flowmetry, electric pulp testing, and thermal testing (CO2 snow). Each patient was tested at T1 (prior to expansion), T2 (2 weeks after rapid expansion), and T3 (3 months after expansion). Relationships between PBF, time interval, and history of trauma were evaluated using linear mixed modelling.

RESULTS

Within the Trauma group, PBF was significantly lower (P ≤ .05) at T2 and T3 in comparison to T1 and significantly lower (P ≤ .05) at T2 in comparison to T3. In the Non-trauma group, PBF at T2 was significantly lower (P ≤ .05) than PBF at T1 and T3; however, no significant difference (P > .05) in PBF was observed when comparing PBF at T1 and T3. In both groups, PS was maintained in almost all teeth (>90%).

CONCLUSIONS

RME in healthy teeth causes reduction of PBF before reestablishment of pretreatment values. RME in traumatized teeth causes reduction of PBF without PBF being reestablished to pretreatment levels. Teeth with a history of compromise may have reduced adaptive capacity under insults such as RME, which should be appreciated during the informed consent process.

Correlation assessment of cervical vertebrae maturation stage and mid-palatal suture maturation in an Iranian population

AIM

The aim of the current study was to evaluate the correlation of skeletal age based on cervical vertebrae maturation (CVM) stage and mid-palatal suture (MPS) maturation in an Iranian population.

MATERIAL AND METHODS

This was a cross-sectional analytic study. A total number of 93 samples were included. Samples were taken from patients who were in CS3 to CS6 stages of CVM who had cone-beam computed tomography and lateral cephalometry based on inclusion criteria. The maturation of MPS was assessed based on the cone-beam computed tomography images. In the classification of maturation of MPS, there are five stages (A-E) and the suture fusion occurs in stage D. In stage E, the suture is fused completely. The CVM stage (CS1-6) was also assessed based on the lateral cephalograms. Data were analyzed using Spearman correlation with a significance level of 0.05.

RESULTS

A total of 51 female individuals with a mean age of 14.98 ± 4.806 and 42 male individuals with a mean age of 15.79 ± 5.135 participated in this study. The correlation coefficient between the CVM stage and MPS maturation was 0.691 in female and 0.754 in male individuals (P < 0.001). Stage D was correlated with CS4.

CONCLUSION

The results demonstrated that CVM stages had a significant but moderate positive correlation with the maturation of MPS. Until CS3, the MPS has not been fused and in CS6 the MPS is fused definitely.

Tomographic assessment of palatal suture opening pattern and pterygopalatine suture disarticulation in the axial plane after midfacial skeletal expansion

OBJECTIVE

The purpose of this study was to assess the palatal suture opening and the pterygopalatine suture disarticulation pattern in the tomographic axial plane after treatment with midfacial skeletal expander (MSE).

MATERIALS AND METHODS

Pre- and post-expansion CBCT records of 50 subjects (20 males, 30 females, mean age 18 ± 3 years) who were treated with MSE (Biomaterials Korea, Seoul, Korea) appliance were superimposed and compared using OnDemand software. Reference planes were identified and the angulation of the midpalatal suture opening after expansion was calculated as well as the frequency of the pterygopalatine suture split.

RESULTS

After MSE treatment, the mean palatal suture opening angle (SOA) was 0.57°. (- 0.8° to 1.3°). There was no significant difference between males and females in terms of the palatal suture opening pattern (P > 0.05). Only 3 out of 50 (6%) subjects presented SOA above 1 degree. Also, 3 out of 50 (6%) patients presented a negative SOA value. With regard to the pterygopalatine suture split, 84 sutures out of 100 (84%) presented openings between the medial and lateral pterygoid plates on both right and left sides. Partial split was detected with 8 patients (5 females, 3 males). Five patients had split only in the medial pterygoid plates of both pterygomaxillary sutures, and 3 patients exhibited disarticulation on the right side only. No significant differences were found in the frequency of suture opening between males and females (P = 1.000).

CONCLUSIONS

MSE appliance performed almost parallel expansion in the axial view. Remarkably, this study shows that pterygopalatine suture can be split by MSE appliance without the surgical intervention; the disarticulation of pterygopalatine suture was visible in most of the patients.

A New Proposal: a Digital Flow for the Construction of a Haas-Inspired Rapid Maxillary Expander (HIRME)

Maxillary expansion is a common orthodontic treatment used for the correction of posterior crossbite resulting from reduced maxillary width. Transverse maxillomandibular discrepancies are a major cause of several malocclusions and may be corrected in different manners; in particular, the rapid maxillary expansion (RME) performed in the early mixed dentition has now become a routine procedure in orthodontic practice. The aim of this study is to propose a procedure that reduces the patient cooperation as well as the lab work required in preparing a customized Haas-inspired rapid maxillary expander (HIRME) that can be anchored to deciduous teeth and can be utilized in mixed dentition with tubes on the molars and hooks and brackets on the canines. This article thus presents an expander that is completely digitally developed, from the first moment of taking the impression with an optical scanner to the final solidification phase by the use of a 3D printer. This digital flow takes place in a CAD environment and it starts with the creation of the appliance on the optical impression; this design is then exported as an stl extension and is sent to the print service to obtain a solid model of the device through a laser sintering process. This "rough" device goes through a post-processing procedure; finally, a commercial expansion screw is laser-welded. This expander has all the advantages of a cast-metal Haas-type RME that rests on deciduous teeth; moreover, it has the characteristic of being developed with a completely digitized and individualized process, for the mouth of the young patient, as well as being made completely of cobalt-chrome, thus ensuring greater adaptability and stability in the patient's mouth.

Finite element analysis of stress caused by palatal orthodontic anchor screws

This study used finite element (FE) analysis to investigate the stability of miniscrews (screws) placed at the median palate. FE models with variable suture maturity and screw-suture distances were used to examine the relationship with screw stability. Four groups were classified by extent of maturation of the midpalatal suture (0%, 60%, 75%, and 100%). The placement position was set at the center of the suture (0.0 mm), or 0.5, 1.0, and 1.5 mm to the side of the suture, and von Mises stress values in bone and screw displacement were compared among models. The stress value for the unsutured model, in which the screw was placed at the center of the suture, was greater than 30 MPa. Stress values for models in which screws were placed to the side (0.5-1.5 mm) were less than 28 MPa. Maximum screw displacement was greater in the 0.0-mm incomplete suture model than at other placement positions. Because bone conditions vary among patients, placement position and suture maturation should be examined on cone beam-computed tomography images, to ensure screw stability.

Variability of the maxillary suture maturation and density in the subjects with different sex and growth status

INTRODUCTION

The objective of this study was to classify median palatine suture (MPS) maturation type in young and adult patients. Additionally, we compared MPS maturity type and density based on sex and growth status.

MATERIALS AND METHODS

In this retrospective cone beam computed tomography study, we included a total of 221 subjects, grouped based on sex and growth status. Once scans were aligned and oriented in the sagittal view, we conducted our evaluations on the axial sections. Based on interdigitation and shape, the MPS were categorized into Maturation Types A through E. Additionally, MPS density was measured as Hounsfield unit equivalent pixel intensity value scale for anterior and posterior sutural regions.

RESULTS

The majority of male (39%) and female (42%) subjects had MPS Maturation Type C. A maximum number of growing (42%) patients had Type C and nongrowing subjects (39%) had Type E sutures. The sex comparison showed significantly lower (p < .001) MPS density for both anterior and posterior regions in males when compared to females. Additionally, for the posterior region, nongrowing males had significantly lower (p < .001) MPS density when compared to nongrowing females. Subgroup comparisons of the MPS densities between growing and nongrowing males and growing and nongrowing females showed a significant difference (p < .001).

CONCLUSION

Classification of the MPS based on the maturation types provides a reliable predictor for orthodontic treatment planning. MPS density is significantly higher in females as compared to males. Similarly, nongrowing individuals have significantly higher MPS density compared to growing individuals for both anterior and posterior locations.

Classification of the midpalatal suture maturation in individuals older than 15 years: a cone beam computed tomographic study

PURPOSE

The aim of this study was to classify the maturation of the midpalatal suture (MPS) in a sample of individuals aged 15 years and older.

METHODS

Tomographic images in axial sections of the MPS of 289 female individuals and 198 male individuals aged between 15 and 40 years were analyzed and classified in stages of maturation (A, B, C, D, and E), stage A represents the earliest maturation stage of the suture and in stage E the fusion of the MPS has occurred in the maxilla. The Kruskal-Wallis and Student-Newman-Kells tests were used to compare the chronological ages among different maturation stages. Spearman's correlation coefficient was used to assess the correlation between patient's age and the maturation stages of the MPS.

RESULTS

Stage A was not observed in the sample. Stages B and C represent, respectively, 1.03% and 34.09% of the sample, stage D was found in 16.63% of the sample while stage E was the most prevalent stage found (48.25%). For females, it was revealed no statistically significant difference in the mean ages among stages C, D and E (p = 0.4753). For males, a statistically significant difference was observed, with the mean age of individuals in stages D and E of the MPS maturation higher than in other stages (p = 0.0001). There was a significant, but weak, correlation between patient's age and the maturation stages of the suture (rs = 0.11/p = 0.01).

CONCLUSION

No individuals in stage A of suture maturation were found and stage B was identified in only 1% of the sample. The majority of the patients (64.88%) presented at least partial fusion of the MPS (stages D and E).

Craniofacial Growth: Current Theories and Influence on Management

Craniofacial development is a highly coordinated process under a tight genetic control and environmental influence. Understanding the core concepts of growth and development of the craniofacial skeleton and the impact of treatment on growth potential is vital to successful patient management. To maximize outcomes and minimize iatrogenic consequences, proper sequencing and timing of interventions are critical. The development of the craniofacial skeleton occurs as a result of a sequence of normal developmental events: brain growth and development, optic pathway development, speech and swallowing development, airway and pharyngeal development, muscle development, and tooth development and eruption.

Assessment of the Stability of the Palatal Rugae in a 3D-3D Superimposition Technique Following Slow Maxillary Expansion (SME)

The Palatal Rugae are considered a useful human identification marker for both orthodontists and forensic personnel. The principal aim of the present study was to evaluate the stability of palatal rugae with a 3D-3D superimposition procedure following Slow Maxillary Expansion (SME), in order to assess whether they kept their uniqueness and validity for human identification, even after a specific dental treatment. For this purpose, a sample of 27 digital dental models - belonging to growing patients (13 males and 14 females), aged between 8.5 and 15 years, who underwent SME therapy - was retrospectively studied and compared with a control group of 27 untreated subjects - (13 males and 14 females). Digital dental models were obtained pre-treatment and at device removal; both were processed by means of an intraoral scanner. A superimposition procedure was thus performed to reach the minimum point-to-point distance between two models of palatal rugae. Intra- and inter-observer differences were statistically analyzed by paired Wilcoxon test and Intra-class Correlation coefficient (ICC), showing values larger than 0.93. There was no difference in Root-Mean-Square (RMS) values between untreated control subjects and subjects treated with Leaf Expander (p = 0.062). A RMS value of 0.43 was the threshold to distinguish the pooled group (“Untreated” and “Leaf”) from any mismatch. According to the obtained results, this study failed to reject the null hypothesis and presented no differences between the RMS values of the Test group and the RMS values of the untreated control group. This work highlighted the usefulness of 3D superimposition procedure for purposes of human identification, in subjects undergoing dental treatment. However, keeping in sight the forensic use of this technique as a helpful probation element in court, further studies should be performed to confirm these findings.

Ectopic maxillary third molar in Early Pleistocene Homo antecessor from Atapuerca-Gran Dolina site (Burgos, Spain)

OBJECTIVES

Here we describe the case of an ectopic maxillary third molar (M³ ), preventing the eruption of the M² , in the individual H3 of the hominin hypodigm of level TD6.2 of the Early Pleistocene site of Gran Dolina (Sierra de Atapuerca, Spain).

MATERIALS AND METHODS

The fossil remains from the TD6.2 level of the Gran Dolina site (about 170 specimens) are assigned to Homo antecessor. Different geochronological methods place these hominins in the oxygen isotopic stage 21, between 0.8 and 0.85 million years ago (Ma). The immature individual H3 is represented by an almost complete midface (ATD6-69), preserving various teeth in situ. We used high-resolution microtomograhy (mCT) to investigate the abnormal position of the left M³ , virtually reconstruct M² , and M³ as well as assessing the development stage of these. Finally, we compare this case with extinct and extant populations.

RESULTS

Based on the identified signs, we suggest that individual H3 suffered from a unilateral impaction of the M² as a result of the ectopic position of the developing M³ .

DISCUSSION

We conclude that the most likely etiology for the ectopic position of the M³ is the lack of space in the maxilla. We discuss possible contributing factors, such as morphometric aspects of the maxilla and the early mineralization of the M³ , to support the M² impaction. Finally, due to the early age at death of this individual we did not identify any secondary lesion associated with the M² impaction.

Evaluation of Midpalatal Suture Ossification Using Cone-Beam Computed Tomography: A Digital Radiographic Study

BACKGROUND

Cone beam computed tomography (CBCT) imaging techniques are the recent rage in the field of oral diagnostic imaging modality. It is noninvasive, faster and lacks anatomic superimposition. Earlier maxillary occlusal radiographs were used to assess and evaluate the mid palatal suture, but being a two dimensional imaging modality it could not assess the ossification process which takes place in multiple planes mostly due to curved nature of the palate. In this study we assessed the mid palatal suture morphology and classify them according to the variants using CBCT images.

MATERIALS AND METHODS

A total of 200 CBCT scans (95 males and 105 females) were evaluated in the present study from the archives of an imaging center. As per Angelieri classification the midpalatal suture was classified into five categories (A-E) depending on the degree of ossification that had taken place. Statistical analysis was done by Chi Square test using SPSS version 23.0.

RESULTS

There is statistically significant difference present in the stages of maturity of mid palatal suture in various age groups with Stage B is most common in Group 1 (50%), Stage C most common in Group 2 (60%) and Group 3 (40%) and Stage E more common in Group 4 (50%).

CONCLUSION

The results of the present study showed a wide variation in the initiation time and the degree of ossification and morphology of the midpalatal suture in different age groups. Although there was an increase in the closure of the suture with aging, age is not a reliable criterion for determining the open or closed nature of the suture. This finding is important in providing an idea as to how diverse is the ossification of maxillary sutures.