Determination of the Mark-Houwink equation for chitosans with different degrees of deacetylation

Dual-Mode Solution Plasma Processing for the Production of Chitosan/Ag Composites with the Antibacterial Effect

The development of novel biocompatible and biodegradable materials for medical applications has been drawing significant interest in the scientific community for years. Particularly, chitosan loaded with silver nanoparticles (Ag NPs) has a strong antimicrobial potential and could be applied, for example, as wound dressing material. In this work, chitosan/Ag NP composites were produced utilizing a single-step plasma-solution process, which is simple and environmentally friendly. An acetic solution of chitosan containing AgNO₃ was treated by the direct current (DC) atmospheric pressure glow discharge, with the liquid serving as either cathode or anode. The plasma-solution system with liquid anode is more useful for the production of Ag NPs. Nevertheless, the NP size is comparable for both cases. The plasma treatment with both polarities led to chitosan degradation. The cleavage of glucosidic chains mostly occurred in the system with the liquid cathode, whereas the side oxidation reactions took place when the solution served as the anode. The oxidation processes were possibly induced by the hydrogen peroxide H₂O₂ efficiently formed in the last case. The composite materials produced with both polarities of liquid electrode demonstrated the bactericidal action against Gram-negative Escherichia coli, Gram-positive Staphylococcus aureus, and Gram-positive Bacillus subtilis.

Selection of Water-Soluble Chitosan by Microwave-Assisted Degradation and pH-Controlled Precipitation

In the field of gene therapy, chitosan (CS) gained interest for its promise as a non-viral DNA vector. However, commercial sources of CS lack precise characterization and do not generally reach sufficient solubility in aqueous media for in vitro and in vivo evaluation. As low molecular weight CS showed improved solubility, we investigated the process of CS depolymerization by acidic hydrolysis, using either long time heating at 80 °C or short time microwave-enhanced heating. The resulting depolymerized chitosan (dCS) were analyzed by gel permeation chromatography (GPC) and 1H nuclear magnetic resonance (NMR) to determine their average molecular weight (Mn, Mp and Mw), polydispersity index (PD) and degree of deacetylation (DD). We emphasized the production of water-soluble CS (solubility > 5 mg/mL), obtained in reproducible yield and characteristics, and suitable for downstream functionalization. Optimal microwave-assisted conditions provided dCS with a molecular weight (MW) = 12.6 ± 0.6 kDa, PD = 1.41 ± 0.05 and DD = 85%. While almost never discussed in the literature, we observed the partial post-production aggregation of dCS when exposed to phase changes (from liquid to solid). Repeated cycles of freezing/thawing allowed the selection of dCS fractions which were exempt of crystalline particles formation upon solubilization from frozen samples.

Ultrasonic assisted water-in-oil emulsions encapsulating macro-molecular polysaccharide chitosan: Influence of molecular properties, emulsion viscosity and their stability

An ultrasonic technique was applied to formulation of two-phase water-in-paraffin oil emulsions loading a high-molecular polysaccharide chitosan (CS) and stabilized by an oil-soluble surfactant (Span80) at different operational conditions. The influence of chitosan molecular properties, phase volume ratio (φ_w), Span80 volume fraction (φ_s) and ultrasonic processing parameters were systemically investigated on the basis of mean droplet diameter (MDD) and polydispersity index (PDI) of emulsions. It was observed that the molecular weight (M_w) of CS was an important influential factor to MDD due to the non-Newtonian properties of CS solution varying with M_w. The minimum MDD of 198.5 nm with PDI of 0.326 was obtained with ultrasonic amplitude of 32% for 15 min at an optimum φ_w of 35%, φ_s of 8%, probe position of 2.2 cm to the top of emulsion, while CS with M_w of 400 kDa and deacetylation degree of 84.6% was used. The rise of emulsion viscosity and the reduction of negative zeta potential at φ_w increasing from 5% to 35% were beneficial to obtain finer droplets and more uniform distribution of emulsions, and emulsion viscosity could be represented as a monotonically-decreasing power function of MDD at the same φ_w. FTIR analysis indicated that the molecular structure of paraffin oil was unaffected during ultrasonication. Moreover, the emulsions exhibited a good stability at 4 °C with a slight phase separation at 25 °C after 24 h of storage. By analyzing the evolution of MDD, PDI and sedimentation index (SI) with time, coalescence model showed better fitting results as comparison to Ostwald ripening model, which demonstrated that the coalescence or flocculation was the dominant destabilizing mechanism for such W/O emulsions encapsulating CS. This study may provide a valuable contribution for the application of a non-Newtonian macromolecule solution as dispersed phase to generate nano-size W/O emulsions via ultrasound, and widen knowledge and interest of such emulsions in the functional biomaterial field.

Hydrogels in the clinic

Injectable hydrogels are one of the most widely investigated and versatile technologies for drug delivery and tissue engineering applications. Hydrogels' versatility arises from their tunable structure, which has been enabled by considerable advances in fields such as materials engineering, polymer science, and chemistry. Advances in these fields continue to lead to invention of new polymers, new approaches to crosslink polymers, new strategies to fabricate hydrogels, and new applications arising from hydrogels for improving healthcare. Various hydrogel technologies have received regulatory approval for healthcare applications ranging from cancer treatment to aesthetic corrections to spinal fusion. Beyond these applications, hydrogels are being studied in clinical settings for tissue regeneration, incontinence, and other applications. Here, we analyze the current clinical landscape of injectable hydrogel technologies, including hydrogels that have been clinically approved or are currently being investigated in clinical settings. We summarize our analysis to highlight key clinical areas that hydrogels have found sustained success in and further discuss challenges that may limit their future clinical translation.

The Use of Chitosan, Alginate, and Pectin in the Biomedical and Food Sector-Biocompatibility, Bioadhesiveness, and Biodegradability

Nowadays, biopolymers as intelligent and active biopolymer systems in the food and pharmaceutical industry are of considerable interest in their use. With this association in view, biopolymers such as chitosan, alginate, pectin, cellulose, agarose, guar gum, agar, carrageenan, gelatin, dextran, xanthan, and other polymers have received significant attention in recent years due to their abundance and natural availability. Furthermore, their versatile properties such as non-toxicity, biocompatibility, biodegradability, and flexibility offer significant functionalities with multifunctional applications. The purpose of this review is to summarize the most compatible biopolymers such as chitosan, alginate, and pectin, which are used for application in food, biotechnological processes, and biomedical applications. Therefore, chitosan, alginate, and pectin are biopolymers (used in the food industry as a stabilizing, thickening, capsular agent, and packaging) with great potential for future developments. Moreover, this review highlights their characteristics, with a particular focus on their potential for biocompatibility, biodegradability, bioadhesiveness, and their limitations on certain factors in the human gastrointestinal tract.

Wasted Ganoderma tsugae Derived Chitosans for Smear Layer Removal in Endodontic Treatment

The objective of this study is to investigate the synergistic effects of acid etching and metal-ion chelation in dental smear layer removal using wasted Ganoderma tsugae derived chitosans. The wasted Ganoderma tsugae fruiting body was used to prepare both acid-soluble fungal chitosan (FCS) and alkali-soluble polysaccharide (ASP). To explore the effective irrigant concentration for smear layer removal, a chelating effect on ferrous ions was conducted. Specimens of various concentrations of EDTA, citric acid, and polysaccharide solutions were reacted with FerroZine™ then the absorbance was examined at 562 nm by a UV-visible spectrophotometer to calculate their metal chelating capability. Twenty extracted premolars were instrumented and individually soaked in the solutions of 15 wt% EDTA, 10 wt% citric acid, 0.04 wt% ASP, 0.04 wt% FCS, and normal saline were randomly divided into five groups (N=4). Next, each tooth was cleaved longitudinally and examined by scanning electron microscopy (SEM) to assay the effectiveness of smear layer removal. The chelating capability for EDTA, FCS, and ASP showed no significant difference over the concentration of 0.04 wt% (p > 0.05). The SEM results showed that 0.04 wt% FCS solution was effective in smear layer removal along the canal wall. These results indicated that Ganoderma tsuage derived FCS in acid solutions could be a potential alternative as a root canal irrigant solution due to its synergistic effect.

Thermochemical research of chitosan complexes with sulfonated metallophthalocyanines

The complexation processes of chitosan with cobalt(II)tetrasulfophthalocyanine (CoPc) and copper(II)tetrasulfophthalocyanine (CuPc) were studied calorimetrically in solution. It was established that CoPc forms two types of complexes with chitosan, while CuPc forms a single type of complex with chitosan, in which copper(II)tetrasulfophthalocyanine is in dimerized form. The complexes are thermodynamically stable, which was allowed to study them in a solid form by different methods. Joint application of DSC and TG/DTG methods allowed us to identify the temperature intervals for evaporation of physically and chemically bounded water and thermal decomposition of chitosan and its complexes. The glass transition temperature of chitosan (110.8 °C) is greater than the glass transition temperature of the complexes with CuPc (74.7 °C) and CoPc (71.2 °C). Using SEM images and X-ray data of heated, unheated chitosan and its complexes, it was shown that the complexes are predominantly amorphous. Heating of chitosan and its leads to increasing of amorphous phase. Modification of chitosan by phthalocyanines leads to decreasing of thermal stability of complexes insignificantly.

Spectral and thermochemical research of the DNA polyplex with chitosan formation process and the influence of anionic and cationic compounds

In this paper, the results of a spectral and thermochemical study of the DNA polyplex formation with chitosan and the effect of ethidium bromide polyplexes, sodium dodecyl sulfate, n-octyltrimethyl ammonium bromide, poly(4-styrenesulfonic acid), and heparin on the stability of the complexes are considered. It has been established that chitosan forms thermodynamically stable complexes with ethidium bromide (EtBr), in which there exists one monomer unit of chitosan for two ethidium bromide ones. The interaction of ethidium bromide with chitosan leads to a charge exchange of the polymer surface. The impact of chitosan on the intercalated DNA-EtBr complex conditions a release of EtBr with a polyplex formation. The process of polyplex formation in the presence of ethidium bromide proceeds endothermically, and in its absence the reaction is exothermic. The polyplex particles formed from DNA after release of EtBr are larger and have a smaller charge, as compared to the polyplex particles obtained without ethidium bromide. It has been found that anionic compounds cause the degradation of polyplexes, and it can prove to be a significant obstacle for using chitosan polyplexes in transfection, since in the presence of heparin in the bloodstream, the complexes will break down before reaching the target.

Dissolution of chitosan nanocrystals in aqueous media of different acidity. Molecular dynamic study

The process of dissolution of chitosan nanocrystals with molecular mass of polymer up to 12.8 kDa in aqueous media of various pH was studied by molecular dynamic simulations with the use of the improved force field GROMOS 56A_{CARBO_CHT} specially developed for the chitosan polymers description. The effect of the media acidity and polymer molecular weight on the dissolution process kinetics has been studied and the regression expressions for kinetic parameters were established. The calculated solution viscosity, Mark-Houwink-Sakurada equation parameters, and pH values of the dissolution beginning are in good agreement with the available experimental data. The uniform/non-uniform distribution of protonated amino groups and hydrogen bonds along the polymeric chains is found to be of key importance parameter for the dissolution process which can be considered as a criterion of dissolution ability.

Extraction and characterization of chitin from sea snail Conus inscriptus (Reeve, 1843)

The chitin was extracted from C. inscriptus and the structure was elucidated. The yield of the C. inscriptus shell chitin was 21.65% on dry weight basis. The ash and moisture content of the chitin was 1.2 and 6.50%. The result of the molecular analysis of the chitin revealed low molecular weight (25 kDa). The crystalline structure (XRD), functional group (FT-IR), elemental analysis (EDAX), surface morphology (SEM) and thermal stability (TG/DTA) results confirmed conus chitin was in α-crystalline form. The crystalline index value (CrI) of the conus chitin was 82.13%. The FT-IR analysis of the conus chitin displayed two bands at around 1730 and 1628 cm^-1. SEM investigation of the commercial chitin and C. inscriptus chitin exposed that it was composed of nanopore and nanofibre structures. Further, the thermal stability of the conus chitin was close to the thermal stability of the commercial chitin. The results show that processing of C. inscriptus shell can lead to a high quality chitin, useful for a broad range of applications.

Investigation of Substituent Effect in Modified Nature-Sourced Polymers: Rational Side Chain Engineering to Control Yield, Design, and Properties

"Side chain engineering" research has yielded many promising and beneficial results, with applications in various fields. However, this research did not receive sufficient focus when nature-sourced polymers are concerned. In this study, we have performed side chain engineering on chitosan, a nature-sourced polysaccharide, by coupling it with a number of aliphatic aldehydes of varying chain lengths. The side chains' length and the pursuing effect on the modified products' properties were studied in great detail. In terms of coupling yields, it was found that some substituents have displayed more favorable results than others by a factor of over 35 times. When studying the modified polymers' physical and mechanical properties, some of them were found to exhibit more rigid mechanical properties by a factor of 3.5 times than others. The effect was also expressed through self-assembly concentrations and encapsulation capabilities of the modified polymers. Remarkably, the combined experimental and calculated kinetic studies showed the results do not necessarily follow a linear progression relating to substituent chain length, but rather a parabolic pattern with a specific extremum point. This study has assisted in shedding light on the inspected phenomenon, explaining that not only steric and electronic factors but also interfacial solubility related factors govern the coupling reaction and the resulting modified polymers' properties. As chemical protocols in various academic, clinical, and industrial studies around the world slowly shift their norms toward finding safer ways for the production of novel materials and technologies, nature-sourced polymers hold great promise as virtually inexhaustible raw materials. The perfection of their chemical modification is therefore relevant now more than ever, with far-reaching and diverse applicative prospects.

Synthesis and Evaluation of Herbal Chitosan from Ganoderma Lucidum Spore Powder for Biomedical Applications

Chitosan is an extremely valuable biopolymer and is usually obtained as a byproduct from the shells of crustaceans. In the current work, chitosan is obtained from an herbal source (Ganoderma lucidum spore powder (GLSP)) for the first time. To show this, both standard (thermochemical deacetylation, (TCD)) and emerging (ultrasound-assisted deacetylation (USAD)) methods of chitosan preparation were used. The obtained chitosan was characterized by elemental analysis, XRD (X-ray diffraction), FT-IR (Fourier transform infrared spectroscopy) and thermogravimetric measurements. The process resulted in chitosan possessing comparable values of DD, [η] and [Formula: see text] to the commercial product. Chitosan obtained via both processes (TCD and USAD) displayed excellent biocompatibility; although the USAD prepared biopolymer exhibited significantly improved fibroblast (L929 cell) viability and enhanced antibacterial zones for both Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). The findings of new herbal chitosan mark key developments of natural biomaterials; marking a potential shift from conventional sea-based organisms.

Multi-Jet Electrospinning with Auxiliary Electrode: The Influence of Solution Properties

Multiple jets ejection in electrospinning has been a major approach to achieving a high production rate of ultrafine fibers, also known as nanofibers. This work studies the effect of solution parameters—including dielectric constant, polarity, conductivity and surface tension—on the jet number and jet evolution in the auxiliary electrode electrospinning approach. The results show that it is easier to generate 2–6 jets with short stable jet length (1.7–6.9 mm) under low voltage (5.03–7.13 kV) when solutions have higher dielectric constant (32.2–78.6) and larger surface tension (31.8–41.29 mN/m). The influence of solution properties on stable jet length and the influence of applied voltage to produce multiple jets are discussed in detail. This work provides a new perspective for understanding jet evolution and mass production of nanofibers in electrospinning.

Antitumor activity of chitosan from mayfly with comparison to commercially available low, medium and high molecular weight chitosans

Insects' cuticles have a potential to be evaluated as a chitin source. Especially adults of aquatic insects like mayflies (order Ephemeroptera) swarm in enormous numbers in artificially lit areas while mating in spring and then die by leaving huge amounts of dead insects' bodies. Here in this study, mayfly corpses were harvested and used for production of low MW chitosan. Dried mayfly bodies had 10.21% chitin content; mayfly chitin was converted into chitosan with efficiency rate of 78.43% (deacetylation degree, 84.3%; MW, 3.69 kDa). Cytotoxicity and anti-proliferative activity of mayfly and commercially available shrimp chitosans (low, medium, and high MW) were determined on L929 fibroblast and three different cancer types including HeLa, A549, and WiDr. Apoptosis and necrosis stimulating potential of mayfly and commercial chitosans were also evaluated on A549 and WiDr cells using acridine orange and propidium iodide dual staining to observe morphological changes in nuclei and thus to reveal the predominant cell death mechanism. The effects of chitosans have varied depending on cell types, concentration, and chitosan derivatives. Mayfly and low MW chitosans had a cytotoxic effect at a concentration of 500 μg mL^-1 on non-cancer cells. At concentrations below this value (250 μg mL^-1), mayfly and commercial chitosans except high MW one exhibited strong inhibitory activity on cancer cells especially A549 and WiDr cells. Mayfly chitosan induced early and late apoptosis in A549 cells, but late apoptosis and necrosis in WiDr cells. This study suggests that dead bodies of mayflies can be used for production of low MW chitosan with anti-proliferative activity.