Dielectrophoresis: an assessment of its potential to aid the research and practice of drug discovery and delivery

A tapered aluminium microelectrode array for improvement of dielectrophoresis-based particle manipulation

In this work, the dielectrophoretic force (F_DEP) response of Aluminium Microelectrode Arrays with tapered profile is investigated through experimental measurements and numerical simulations. A standard CMOS processing technique with a step for the formation of a tapered profile resist is implemented in the fabrication of Tapered Aluminium Microelectrode Arrays (TAMA). The F_DEP is investigated through analysis of the Clausius-Mossotti factor (CMF) and cross-over frequency (f_xo). The performance of TAMA with various side wall angles is compared to that of microelectrodes with a straight cut sidewall profile over a wide range of frequencies through FEM numerical simulations. Additionally, electric field measurement (EFM) is performed through scanning probe microscopy (SPM) in order to obtain the region of force focus in both platforms. Results showed that the tapered profile microelectrodes with angles between 60° and 70° produce the highest electric field gradient on the particles. Also, the region of the strongest electric field in TAMA is located at the bottom and top edge of microelectrode while the strongest electric field in microelectrodes with straight cut profile is found at the top corner of the microelectrode. The latter property of microelectrodes improves the probability of capturing/repelling the particles at the microelectrode’s side wall.

Monitoring the permeabilization of a single cell in a microfluidic device, through the estimation of its dielectric properties based on combined dielectrophoresis and electrorotation in situ experiments

The electric field is commonly used in microdevices to handle, treat, or monitor living cells for various biological or biomedical applications (cells electrofusion, gene electrotransfer, drugs injection, cell sorting, …). Dielectrophoresis (DEP) forces, using stationary waves (conventional DEP) or traveling waves, are widely used for the cell handling or sorting. Electrorotation, which is induced by a rotating electrical field, is used for the determination of cell dielectric parameters. The application of pulsed electric field (PEF) results in the cell membrane permeabilization that might allow the transfer of various molecules in the cytoplasm. In this paper, we propose a method to monitor in situ the level of electropermeabilization induced by PEF application on a single cell, by combining the dielectrophoresis force and the electrorotation torque within a microfluidic device. The method was experimented on two different cell lines (human leukemic T-cell lymphoblast and murine melanoma cell): a single cell is captured by dielectrophoresis while its dielectric properties (both permittivity and conductivity of cytoplasm and membrane) are estimated thanks to a rotating electric field, which is applied simultaneously. The permeabilization effect of PEF, applied to the single cell trapped in such conditions in the biodevice, could be monitored by the estimation of its dielectric properties before and after pulse application.

Design, fabrication and characterization of dielectrophoretic microelectrode array for particle capture

Purpose

– The purpose of this study is to design and characterize the dielectrophoretic (DEP) microelectrodes with various array structure arrangements in order to produce optimum non-uniform electric field for particle capture. The DEP-electrodes with 2D electrode structure was fabricated and characterized to see the effect of electrode structure configuration on the capture capability of the cells suspending in the solution.

Design/methodology/approach

– The presented microelectrode array structures are made of planar conductive metal structure having same size and geometry. Dielectrophoretic force (FDEP) generated in the fluidic medium is initially simulated using COMSOL Multi-physics performed on two microelectrodes poles, which is then continued on three-pole microelectrodes. The proposed design is fabricated using standard MEMS fabrication process. Furthermore, the effect of different sinusoidal signals of 5, 10 and 15 volt peak to peak voltage (Vpp) at fixed frequency of 1.5 MHz on capturing efficiency of microelectrodes were also investigated using graphite metalloids particles as the suspended particles in the medium. The graphite particles that are captured at the microelectrode edges are characterized over a given time period.

Findings

– Based on analysis, the capturing efficiency of microelectrodes at the microelectrode edges is increased as voltage input increases, confirming its dependency to the FDEP strength and direction of non-uniform electric field. This dependency to field consequently increases the surface area of the accumulated graphite. It is also showed that the minimum ratio of the surface accumulated area of captured graphite is 1, 2.75 and 9 μm2 for 5, 10 and 15 Vpp, respectively. The simulation result also indicates a significant improvement on the performance of microelectrodes by implementing third pole in the design. The third pole effect the particles in the medium by creating stronger non-uniform electric field as well as more selective force toward the microelectrodes’ edges.

Originality/value

– The microelectrode array arrangement is found as a reliable method to increase the strength and selectivity of non-uniform electric field distribution that affect FDEP. The presented findings are verified through experimental test and simulation results.

Involvement of membrane proteins and ion channels on the self-rotation of human cells in a non-rotating AC electric field

Dielectrophoresis is a force that has been exploited in microsystems for label-free characterization and separation of cells, when their electrical signature is known. However, the polarization effect of cells at the transmembrane protein level is not well established. In this work, we have use the self-rotation effect of cells in a non-rotating field, known as the "Quincke effect," in order to measure the maximum rotation frequency (frotmax ) of different cell populations when modifying the composition of their membrane. We investigated the influence of active ionic transportation of membrane protein concentration on frotmax of HEK cells. Our results show that ionic transportation is responsible for the reduction of conductivity within the cytoplasm, which results in higher frotmax . However, the influence of the concentration of proteins in the membrane, achieved by silencing gene expression in cancer cells, changes significantly frotmax , which is not explained by the changes of ionic conductivity within the cell.

Dielectrophoretic separation of micron and submicron particles: a review

This paper provides an overview on separation of micron and submicron sized biological (cells, yeast, virus, bacteria, etc.) and nonbiological particles (latex, polystyrene, CNTs, metals, etc.) by dielectrophoresis (DEP), which finds wide applications in the field of medical and environmental science. Mathematical models to predict the electric field, flow profile, and concentration profiles of the particles under the influence of DEP force have also been covered in this review. In addition, advancements made primarily in the last decade, in the area of electrode design (shape and arrangement), new materials for electrode (carbon, silicon, polymers), and geometry of the microdevice, for efficient DEP separation of particles have been highlighted.

Isolation of circulating tumor cells by dielectrophoresis

Dielectrophoresis (DEP) is an electrokinetic method that allows intrinsic dielectric properties of suspended cells to be exploited for discrimination and separation. It has emerged as a promising method for isolating circulation tumor cells (CTCs) from blood. DEP-isolation of CTCs is independent of cell surface markers. Furthermore, isolated CTCs are viable and can be maintained in culture, suggesting that DEP methods should be more generally applicable than antibody-based approaches. The aim of this article is to review and synthesize for both oncologists and biomedical engineers interested in CTC isolation the pertinent characteristics of DEP and CTCs. The aim is to promote an understanding of the factors involved in realizing DEP-based instruments having both sufficient discrimination and throughput to allow routine analysis of CTCs in clinical practice. The article brings together: (a) the principles of DEP; (b) the biological basis for the dielectric differences between CTCs and blood cells; (c) why such differences are expected to be present for all types of tumors; and (d) instrumentation requirements to process 10 mL blood specimens in less than 1 h to enable routine clinical analysis. The force equilibrium method of dielectrophoretic field-flow fractionation (DEP-FFF) is shown to offer higher discrimination and throughput than earlier DEP trapping methods and to be applicable to clinical studies.