The use of dentin matrix scaffold and dental follicle cells for dentin regeneration

Comparative adsorption profiles of basal lamina proteome and gingival cells onto dental and titanium surfaces

Titanium (Ti) dental implants are susceptible to bacterial infections and failure due to lack of proper epithelial seal. Epithelial cells establish a strong epithelial seal around natural teeth by the deposition of basal lamina (BL) proteins that adsorb on the tooth surface. This seal can even be re-established onto cementum or dentin following injury or periodontal therapy. However, it is unclear how tooth surfaces promote this cell attachment and protein adsorption. Understanding the interactions between BL proteins and epithelial cells with dentin and Ti will facilitate the development of implant surfaces that promote the formation of an epithelial seal and improve the success of periodontal therapy and wound healing on natural teeth. To study these interactions, we used a surface proteomic approach to decipher the adsorption profile of BL proteins onto Ti and dentin, and correlated these adsorption profiles with in vitro interactions of human gingival fibroblasts and epithelial cells. Results showed that dentin adsorbed higher amounts of key BL proteins, particularly laminin and nidogen-1, and promoted more favorable interactions with epithelial cells than Ti. Next, dentin specimens were deproteinized or partially demineralized to determine if its mineral or protein component was responsible for BL adsorption and cell attachment. Deproteinized (mineral-rich) and partially demineralized (protein-rich) dentin specimens revealed BL proteins (i.e. laminin and nidogen-1) and epithelial cells interact preferentially with dentinal proteins rather than dentin mineral. These findings suggest that, unlike Ti, dentin and, in particular, dentinal proteins have a selective affinity to BL proteins that enhance epithelial cell attachment.

STATEMENT OF SIGNIFICANCE

It is remains unclear why natural teeth, unlike titanium dental implants, promote the formation of an epithelial seal that protects them against the external environment. This study used a surface screening approach to analyze the adsorption of proteins produced by epithelial tissues onto tooth-dentin and titanium surfaces, and correlate it with the behaviour of cells. This study shows that tooth-dentin, in particular its proteins, has a higher selective affinity to certain adhesion proteins, and subsequently allows more favourable interactions with epithelial cells than titanium. This knowledge could help in developing new approaches for re-establishing and maintaining the epithelial seal around teeth, and could pave the way for developing implants with surfaces that allow the formation of a true epithelial seal.

3D Maskless Micropatterning for Regeneration of Highly Organized Tubular Tissues

Micropatterning is a widely used powerful tool to create highly ordered microstructures on material surfaces. However, due to technical limitations, the integration of micropatterned microstructures into bioinspired 3D scaffolds to successfully regenerate well-organized functional tissues is not achieved. In this work, a unique maskless micropatterning technology is reported to create 3D nanofibrous matrices with highly organized tubular architecture for tissue regeneration. This micropatterning method is a laser-guided, noncontact, high-precision, flexible computer programming of machining process that can create highly ordered tubules with the density ranged from 1000 to 60 000 mm-2 and the size varied from 300 nm to 30 µm in the bioinspired 3D matrix. The tubular architecture presents pivotal biophysical cues to control dental pulp stem cell alignment, migration, polarization, and differentiation. More importantly, when using this 3D tubular hierarchical matrix as a scaffold, this study successfully regenerates functional tubular dentin that has the same well-organized microstructure as its natural counterpart. This 3D maskless micropattern approach represents a powerful avenue not only for the exploration of cell-material interactions in 3D, but also for the regeneration of functional tissues with well-organized microstructures.

Three-dimensional printing for craniomaxillofacial regeneration

Craniomaxillofacial injuries produce complex wound environments involving various tissue types and treatment strategies. In a clinical setting, care is taken to properly irrigate and stabilize the injury, while grafts are molded in an attempt to maintain physiological functionality and cosmesis. This often requires multiple surgeries and grafts leading to added discomfort, pain and financial burden. Many of these injuries can lead to disfigurement and resultant loss of system function including mastication, respiration, and articulation, and these can lead to acute and long-term psychological impact on the patient. A main causality of these issues is the lack of an ability to spatially control pre-injury morphology while maintaining shape and function. With the advent of additive manufacturing (three-dimensional printing) and its use in conjunction with biomaterial regenerative strategies and stem cell research, there is an increased potential capacity to alleviate such limitations. This review focuses on the current capabilities of additive manufacturing platforms, completed research and potential for future uses in the treatment of craniomaxillofacial injuries, with an in-depth discussion of regeneration of the periodontal complex and teeth.

Demineralized dentin and enamel matrices as suitable substrates for bone regeneration

Background

In recent decades, tooth derivatives such as dentin (D) and enamel (E) have been considered as potential graft biomaterials to treat bone defects. This study aimed to investigate the effects of demineralization on the physical-chemical and biological behavior of D and E.

Methods

Human D and E were minced into particles (Ø<1 mm), demineralized and sterilized. Thorough physical-chemical and biochemical characterizations of native and demineralized materials were performed by SEM and EDS analysis and ELISA kits to determine mineral, collagen type I and BMP-2 contents. In addition, MG63 and SAOS-2 cells were seeded on tooth-derived materials and Bio-Oss®, and a comparison of cell responses in terms of adhesion and proliferation was carried out.

Results

The sterilization process, as a combination of chemical and thermal treatments, was found to be effective for all materials. On the other hand, D demineralization allowed preserving the collagen content, while increasing BMP-2 bioavailability. D and demineralized D (dD) displayed excellent biocompatibility, even greater than Bio-Oss®. Conversely, the high mineral content displayed by E, as confirmed by EDS analysis, inhibited cell proliferation. Of note, even though the demineralization process was somehow less effective in E than in D, demineralized E (dE) displayed increased BMP-2 bioavailability and improved performance in vitro compared with native E.

Conclusions

Our results substantiate the idea that the demineralization process lead to an increase of BMP-2 bioavailability, thus paving the way toward development of more effective, osteoinductive tooth-derived materials for bone regeneration and replacement.

Xenogeneic Bio-Root Prompts the Constructive Process Characterized by Macrophage Phenotype Polarization in Rodents and Nonhuman Primates

Tissue or organ regeneration using xenogeneic matrices is a promising approach to address the shortage of donor matrices for allotransplantation. Success of such approach has been demonstrated to correlate with macrophage-mediated fibrotic homeostasis and tissue remodeling. The previous studies have demonstrated that treated dentin matrix (TDM) could be a suitable bioactive substrate for allogeneic tooth root regeneration. This study constructed xenogeneic bioengineered tooth root (bio-root) via a combination of porcine TDM (pTDM) with allogeneic dental follicle cells (DFCs). Macrophage phenotypes are used to evaluate the remodeling process of xenogeneic bio-roots in vitro and in vivo. pTDM can facilitate odontoblast differentiation of human derived DFCs. Xenogeneic bio-roots in rat subcutaneous tissue prompt constructive response via M1 macrophage infiltration during early postimplantation stages and increase restorative M2 phenotype at later stages. After implantation of bio-roots into jaws of rhesus monkeys for six months, periodontal ligament-like fibers accompanied by macrophage polarization are observed, which are positive for COL-1, Periostin, βIII-tubulin and display such structures as fibroblasts and blood vessels. The reconstructed bio-root possesses biomechanical properties for the dissipation of masticatory forces. These results support that xenogeneic bio-root could maintain fibrotic homeostasis during remodeling process and highlight the potential application of xenogeneic matrices in regenerative medicine.

Injectable scaffolds: Preparation and application in dental and craniofacial regeneration

Injectable scaffolds are appealing for tissue regeneration because they offer many advantages over pre-formed scaffolds. This article provides a comprehensive review of the injectable scaffolds currently being investigated for dental and craniofacial tissue regeneration. First, we provide an overview of injectable scaffolding materials, including natural, synthetic, and composite biomaterials. Next, we discuss a variety of characteristic parameters and gelation mechanisms of the injectable scaffolds. The advanced injectable scaffolding systems developed in recent years are then illustrated. Furthermore, we summarize the applications of the injectable scaffolds for the regeneration of dental and craniofacial tissues that include pulp, dentin, periodontal ligament, temporomandibular joint, and alveolar bone. Finally, our perspectives on the injectable scaffolds for dental and craniofacial tissue regeneration are offered as signposts for the future advancement of this field.

Composite cell sheet for periodontal regeneration: crosstalk between different types of MSCs in cell sheet facilitates complex periodontal-like tissue regeneration

Background

Tissue-engineering strategies based on mesenchymal stem cells (MSCs) and cell sheets have been widely used for periodontal tissue regeneration. However, given the complexity in periodontal structure, the regeneration methods using a single species of MSC could not fulfill the requirement for periodontal regeneration.

Methods

We researched the interaction between the periodontal ligament stem cells (PDLSCs) and jaw bone marrow-derived mesenchymal stem cells (JBMMSCs), and constructed a composite cell sheet comprising both of the above MSCs to regenerate complex periodontium-like structures in nude mice.

Results

Our results show that by co-culturing PDLSCs and JBMMSCs, the expressions of bone and extracellular matrix (ECM)-related genes and proteins were significantly improved in both MSCs. Further investigations showed that, compared to the cell sheet using PDLSCs or JBMMSCs, the composite stem cell sheet (CSCS), which comprises these two MSCs, expressed higher levels of bone- and ECM-related genes and proteins, and generated a composite structure more similar to the native periodontal tissue physiologically in vivo.

Conclusions

In conclusion, our results demonstrate that the crosstalk between PDLSCs and JBMMSCs in cell sheets facilitate regeneration of complex periodontium-like structures, providing a promising new strategy for physiological and functional regeneration of periodontal tissue.

Electronic supplementary material

The online version of this article (doi:10.1186/s13287-016-0417-x) contains supplementary material, which is available to authorized users.

Surface characterization and biological properties of regular dentin, demineralized dentin, and deproteinized dentin

Bone autografts are often used for reconstruction of bone defects; however, due to the limitations of autografts, researchers have been in search of bone substitutes. Dentin is of particular interest for this purpose due to high similarity to bone. This in vitro study sought to assess the surface characteristics and biological properties of dentin samples prepared with different treatments. This study was conducted on regular (RD), demineralized (DemD), and deproteinized (DepD) dentin samples. X-ray diffraction and Fourier transform infrared spectroscopy were used for surface characterization. Samples were immersed in simulated body fluid, and their bioactivity was evaluated under a scanning electron microscope. The methyl thiazol tetrazolium assay, scanning electron microscope analysis and quantitative real-time polymerase chain reaction were performed, respectively to assess viability/proliferation, adhesion/morphology and osteoblast differentiation of cultured human dental pulp stem cells on dentin powders. Of the three dentin samples, DepD showed the highest and RD showed the lowest rate of formation and deposition of hydroxyapatite crystals. Although, the difference in superficial apatite was not significant among samples, functional groups on the surface, however, were more distinct on DepD. At four weeks, hydroxyapatite deposits were noted as needle-shaped accumulations on DemD sample and numerous hexagonal HA deposit masses were seen, covering the surface of DepD. The methyl thiazol tetrazolium, scanning electron microscope, and quantitative real-time polymerase chain reaction analyses during the 10-day cell culture on dentin powders showed the highest cell adhesion and viability and rapid differentiation in DepD. Based on the parameters evaluated in this in vitro study, DepD showed high rate of formation/deposition of hydroxyapatite crystals and adhesion/viability/osteogenic differentiation of human dental pulp stem cells, which may support its osteoinductive/osteoconductive potential for bone regeneration.

Histologic tissue response to furcation perforation repair using mineral trioxide aggregate or dental pulp stem cells loaded onto treated dentin matrix or tricalcium phosphate

Objectives

The aim of this study is to compare the effect of treated dentine matrix (TDM) and tricalcium phosphate (TCP) scaffolds on odontogenic differentiation and mineralization of dental pulp stem cells (DPSCs) in furcation perforations created in the pulp chamber floor of premolar teeth in dogs.

Material and methods

DPSCs were isolated and cultured from the dental pulp of the maxillary left second and third premolars of dogs. The DPSCs were loaded on TCP (SC+TCP) and TDM (SC+TDM) scaffolds and inserted into intentionally perforated pulp chamber floors of premolars in dogs; six teeth were used for each group. Three more groups of six specimens were created, and mineral trioxide aggregate (MTA), TDM, and TCP were inserted into the perforations to act as controls. An intact premolar and no treatment in the perforation site were used as positive and negative controls respectively. After 3 months, the animals were sacrificed and the type of inflammation, presence of dentine, continuation and type of cementum, type of connective tissue, and presence of foreign body reaction were evaluated, and significant differences were between groups determined using the Fisher’s exact test. The evaluation of the amount of inflammation and the percentage of new bone formation was evaluated using the Mann-Whitney U test.

Results

The negative control group was associated with severe inflammation and granulation tissue formation. In the positive control group, intact periodontal tissues and no inflammation were observed. Dentine bridge formation was not seen in specimens of any group. The specimens in the SC+TDM group were associated with significantly more bone formation than other groups (P < 0.001). The amount of inflammation was less than 10 % in specimens of all groups with the exception of three specimens in the TCP group that were categorized as 10–30 %. Chronic inflammation without foreign body reactions was the major pattern of inflammation in groups. Formation of cementum with a cellular and continuous appearance was seen in all specimens.

Conclusions

SC+TDM was associated with significantly more bone formation when used to repair uninfected furcation perforations in the premolar teeth of dogs.

Clinical relevance

Application of TDM as a biological scaffold in combination with DPSCs may offer an advantage during the repair of root perforation defects.

The Neurovascular Properties of Dental Stem Cells and Their Importance in Dental Tissue Engineering

Within the field of tissue engineering, natural tissues are reconstructed by combining growth factors, stem cells, and different biomaterials to serve as a scaffold for novel tissue growth. As adequate vascularization and innervation are essential components for the viability of regenerated tissues, there is a high need for easily accessible stem cells that are capable of supporting these functions. Within the human tooth and its surrounding tissues, different stem cell populations can be distinguished, such as dental pulp stem cells, stem cells from human deciduous teeth, stem cells from the apical papilla, dental follicle stem cells, and periodontal ligament stem cells. Given their straightforward and relatively easy isolation from extracted third molars, dental stem cells (DSCs) have become an attractive source of mesenchymal-like stem cells. Over the past decade, there have been numerous studies supporting the angiogenic, neuroprotective, and neurotrophic effects of the DSC secretome. Together with their ability to differentiate into endothelial cells and neural cell types, this makes DSCs suitable candidates for dental tissue engineering and nerve injury repair.

Progress in Bioengineered Whole Tooth Research: From Bench to Dental Patient Chair

Tooth loss is a significant health issue that affects the physiological and social aspects of everyday life. Missing teeth impair simple tasks of chewing and speaking, and can also contribute to reduced self-confidence. An emerging and exciting area of regenerative medicine based dental research focuses on the formation of bioengineered whole tooth replacement therapies that can provide both the function and sensory responsiveness of natural teeth. This area of research aims to enhance the quality of dental and oral health for those suffering from tooth loss. Current approaches use a combination of dental progenitor cells, scaffolds and growth factors to create biologically based replacement teeth to serve as improved alternatives to currently used artificial dental prosthetics. This article is an overview of current progress, challenges, and future clinical applications of bioengineered whole teeth.

Melatonin Treatment Improves Mesenchymal Stem Cells Therapy by Preserving Stemness during Long-term In Vitro Expansion

Mesenchymal stem cells (MSCs) are promising candidates for tissue regeneration and disease treatment. However, long-term in vitro passaging leads to stemness loss of MSCs, resulting in failure of MSCs therapy. Here, we report a melatonin-based strategy to improve cell therapy of in vitro cultured MSCs. Among four small molecules with anti-aging and stem cell-protection properties (rapamycin, resveratrol, quercetin and melatonin), colony forming, proliferation, and osteogenic differentiation assay showed that melatonin was the most efficient to preserve self-renewal and differentiation properties of rat bone marrow MSCs (BMMSCs) after long-term passaging. Functional assays confirmed melatonin treatment did not affect the colony forming, proliferation and osteogenic differentiation of BMMSCs cultured for 1 or 4 passages, but largely prevented the decline of self-renew and differentiation capacity of BMMSCs cultured for 15 passages in vitro. Furthermore, heterotopic osteogenesis assay, critical size calvarial defects repair assay, osteoporosis treatment and experimental colitis therapy assay strongly certified that melatonin preserved the therapeutic effect of long-term passaged BMMSCs on bone regeneration and immunotherapy in vivo. Mechanistically, melatonin functioned by activating antioxidant defense system, inhibiting the pathway of cell senescence, and preserving the expression of gene governing the stemness. Taken together, our findings showed that melatonin treatment efficiently prevented the dysfunction and therapeutic failure of BMMSCs after long-term passaging, providing a practical strategy to improve the application of BMMSCs in tissue engineering and cytotherapy.

Nanocrystalline calcium sulfate/hydroxyapatite biphasic compound as a TGF-β1/VEGF reservoir for vital pulp therapy

OBJECTIVES

Vital pulp therapy aims to treat reversible pulpal injuries via protective dentinogenesis and to preserve more tooth structure. Mineral trioxide aggregate (MTA)-based capping materials demonstrate prolonged setting time increases the risk of pulpal infection during multi-visit treatment. Their non-degradable property occupies pulp space and limits dentin-pulp regeneration. This study reports an inorganic degradable biomaterial that presents a short initial setting time and acts as a growth factor reservoir to promote reparative dentinogenesis.

METHODS

We synthesize nanocrystalline calcium sulfate hemihydrate (nCS), hydroxyapatite (HAp) and calcium sulfate hemihydrate (CS) as a reservoir to which transforming growth factor-beta 1 (TGF-β1) and vascular endothelial growth factor (VEGF) are added (denoted as nCS/HAp/CS/TGF-β1/VEGF). In vitro biocompatibility and mineralization (the activity and expression of alkaline phosphatase, ALP) were evaluated. Rat animal model was created to test in vivo efficacy.

RESULTS

Cultured human dental pulp cells (HDPCs) showed that nCS/HAp/CS/TGF-β1/VEGF cement has excellent biocompatibility and the potential to elevate the activity and expression of ALP. The in vivo efficacy (rat animal model) indicates protective dentin by micro-computed tomography (μ-CT) measurements and histological analyses. The 3D μ-CT non-destructive analysis also determines volume changes during pulpotomy, suggesting that the degraded space of the nCS/HAp/CS/TGF-β1/VEGF cement is repaired by the formation of dentin-pulp tissue.

SIGNIFICANCE

These findings demonstrate that nCS/HAp/CS cement acts as a potent reservoir for the sustained release of growth factors, and that nCS/HAp/CS/TGF-β1/VEGF cement has a high potential to form the reparative dentinogenesis in vivo.

Nanomaterials for Tissue Engineering In Dentistry

The tissue engineering (TE) of dental oral tissue is facing significant changes in clinical treatments in dentistry. TE is based on a stem cell, signaling molecule, and scaffold triad that must be known and calibrated with attention to specific sectors in dentistry. This review article shows a summary of micro- and nanomorphological characteristics of dental tissues, of stem cells available in the oral region, of signaling molecules usable in TE, and of scaffolds available to guide partial or total reconstruction of hard, soft, periodontal, and bone tissues. Some scaffoldless techniques used in TE are also presented. Then actual and future roles of nanotechnologies about TE in dentistry are presented.

The use of platelet-rich fibrin combined with periodontal ligament and jaw bone mesenchymal stem cell sheets for periodontal tissue engineering

Periodontal regeneration involves the restoration of at least three unique tissues: cementum, periodontal ligament tissue (PDL) and alveolar bone tissue. Here, we first isolated human PDL stem cells (PDLSCs) and jaw bone mesenchymal stem cells (JBMSCs). These cells were then induced to form cell sheets using an ascorbic acid-rich approach, and the cell sheet properties, including morphology, thickness and gene expression profile, were compared. Platelet-rich fibrin (PRF) derived from human venous blood was then fabricated into bioabsorbable fibrin scaffolds containing various growth factors. Finally, the in vivo potential of a cell-material construct based on PDLSC sheets, PRF scaffolds and JBMSC sheets to form periodontal tissue was assessed in a nude mouse model. In this model, PDLSC sheet/PRF/JBMSC sheet composites were placed in a simulated periodontal space comprising human treated dentin matrix (TDM) and hydroxyapatite (HA)/tricalcium phosphate (TCP) frameworks. Eight weeks after implantation, the PDLSC sheets tended to develop into PDL-like tissues, while the JBMSC sheets tended to produce predominantly bone-like tissues. In addition, the PDLSC sheet/PRF/JBMSC sheet composites generated periodontal tissue-like structures containing PDL- and bone-like tissues. Further improvements in this cell transplantation design may have the potential to provide an effective approach for future periodontal tissue regeneration.

Different methods of dentin processing for application in bone tissue engineering: A systematic review

Dentin has become an interesting potential biomaterial for tissue engineering of oral hard tissues. It can be used as a scaffold or as a source of growth factors in bone tissue engineering. Different forms of dentin have been studied for their potential use as bone substitutes. Here, we systematically review different methods of dentin preparation and the efficacy of processed dentin in bone tissue engineering. An electronic search was carried out in PubMed and Scopus databases for articles published from 2000 to 2016. Studies on dentin preparation for application in bone tissue engineering were selected. The initial search yielded a total of 1045 articles, of which 37 were finally selected. Review of studies showed that demineralization was the most commonly used dentin preparation process for use in tissue engineering. Dentin extract, dentin particles (tooth ash), freeze-dried dentin, and denatured dentin are others method of dentin preparation. Based on our literature review, we can conclude that preparation procedure and the size and shape of dentin particles play an important role in its osteoinductive and osteoconductive properties. Standardization of these methods is important to draw a conclusion in this regard. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2616-2627, 2016.

Comparison of human dental follicle cells and human periodontal ligament cells for dentin tissue regeneration

AIM

To compare the odontogenic potential of human dental follicle cells (DFCs) and periodontal ligament cells (PDLCs).

MATERIALS & METHODS

In vitro and in vivo characterization studies of DFCs and PDLCs were performed comparatively. DFCs and PDLCs were subcutaneously implanted into the dorsum of mice for 8 weeks after combined with treated dentin matrix scaffolds respectively.

RESULTS

Proteomic analysis identified 32 differentially expressed proteins in DFCs and PDLCs. Examination of the harvested grafts showed PDLCs could form the dentin-like tissues as DFCs did. However, the structure of dentin tissues generated by DFCs was more complete.

CONCLUSION

PDLCs could contribute to regenerate dentin-like tissues in the inductive microenvironment of treated dentin matrix. DFCs presented more remarkable dentinogenic capability than PDLCs did.

Advancing biomaterials of human origin for tissue engineering

Biomaterials have played an increasingly prominent role in the success of biomedical devices and in the development of tissue engineering, which seeks to unlock the regenerative potential innate to human tissues/organs in a state of deterioration and to restore or reestablish normal bodily function. Advances in our understanding of regenerative biomaterials and their roles in new tissue formation can potentially open a new frontier in the fast-growing field of regenerative medicine. Taking inspiration from the role and multi-component construction of native extracellular matrices (ECMs) for cell accommodation, the synthetic biomaterials produced today routinely incorporate biologically active components to define an artificial in vivo milieu with complex and dynamic interactions that foster and regulate stem cells, similar to the events occurring in a natural cellular microenvironment. The range and degree of biomaterial sophistication have also dramatically increased as more knowledge has accumulated through materials science, matrix biology and tissue engineering. However, achieving clinical translation and commercial success requires regenerative biomaterials to be not only efficacious and safe but also cost-effective and convenient for use and production. Utilizing biomaterials of human origin as building blocks for therapeutic purposes has provided a facilitated approach that closely mimics the critical aspects of natural tissue with regard to its physical and chemical properties for the orchestration of wound healing and tissue regeneration. In addition to directly using tissue transfers and transplants for repair, new applications of human-derived biomaterials are now focusing on the use of naturally occurring biomacromolecules, decellularized ECM scaffolds and autologous preparations rich in growth factors/non-expanded stem cells to either target acceleration/magnification of the body's own repair capacity or use nature's paradigms to create new tissues for restoration. In particular, there is increasing interest in separating ECMs into simplified functional domains and/or biopolymeric assemblies so that these components/constituents can be discretely exploited and manipulated for the production of bioscaffolds and new biomimetic biomaterials. Here, following an overview of tissue auto-/allo-transplantation, we discuss the recent trends and advances as well as the challenges and future directions in the evolution and application of human-derived biomaterials for reconstructive surgery and tissue engineering. In particular, we focus on an exploration of the structural, mechanical, biochemical and biological information present in native human tissue for bioengineering applications and to provide inspiration for the design of future biomaterials.

Bone Regeneration Using Dentin Matrix Depends on the Degree of Demineralization and Particle Size

Objectives

This study aimed to examine the influence of particle size and extent of demineralization of dentin matrix on bone regeneration.

Materials and Methods

Extracted human teeth were pulverized and divided into 3 groups according to particle size; 200, 500, and 1000 μm. Each group was divided into 3 groups depending on the extent of demineralization; undemineralized dentin (UDD), partially demineralized dentin matrix (PDDM), and completely demineralized dentin matrix (CDDM). The dentin sample was implanted into rat calvarial bone defects. After 4 and 8 weeks, the bone regeneration was evaluated with micro-CT images, histomorphometric and immunohistochemical analyses. Osteoblasts were cultured on UDD and DDM to evaluate the cell attachment using electron microscope.

Results

Micro-CT images and histological observation revealed that CDDM had largely resorbed but UDD had not, and both of them induced little bone formation, whereas all particle sizes of PDDM induced more new bone, especially the 1000 μm. Electron microscopic observation showed osteoblasts attached to DDM but not to UDD.

Conclusions

PDDM with larger particle size induced prominent bone regeneration, probably because PDDM possessed a suitable surface for cell attachment. There might be an exquisite balance between its resorption and bone formation on it. PDDM could be considered as a potential bone substitute.

TNF-α Inhibits FoxO1 by Upregulating miR-705 to Aggravate Oxidative Damage in Bone Marrow-Derived Mesenchymal Stem Cells during Osteoporosis

Decline of antioxidant defense after estrogen deficiency leads to oxidative damage in bone marrow-derived mesenchymal stem cells (BMMSCs), resulting a defect of bone formation in osteoporosis. Forkhead box O1 (FoxO1) protein is crucial for defending physiological oxidative damage in bone. But whether FoxO1 is involved in the oxidative damage during osteoporosis is largely unknown. In this study, we found that FoxO1 protein accumulation was decreased in BMMSCs of ovariectomized mice. The decrease of FoxO1 resulted in the suppression of manganese superoxide dismutase (Sod2) and catalase (Cat) expression and accumulation of reactive oxygen species (ROS), inhibiting the osteogenic differentiation of BMMSCs. The decline of FoxO1 protein was caused by tumor necrosis factor-alpha (TNF-α) accumulated after estrogen deficiency. Mechanistically, TNF-α activated NF-κB pathway to promote microRNA-705 expression, which function as a repressor of FoxO1 through post-transcriptional regulation. Inhibition of NF-κB pathway or knockdown of miR-705 largely prevented the decline of FoxO1-mediated antioxidant defense caused by TNF-α and ameliorated the oxidative damage in osteoporotic BMMSCs. Moreover, the accumulated ROS further activated NF-κB pathway with TNF-α, which formed a feed-forward loop to persistently inhibiting FoxO1 protein accumulation in BMMSCs. In conclusion, our study revealed that the decline of FoxO1 is an important etiology factor of osteoporosis and unclosed a novel mechanism of FoxO1 regulation by TNF-α. These findings suggested a close correlation between inflammation and oxidative stress in stem cell dysfunction during degenerative bone diseases.

An injectable scaffold based on crosslinked hyaluronic acid gel for tissue regeneration

An injectable scaffold of crosslinked hyaluronic acid gel for tissue regeneration.

Scaffolds in regenerative endodontics: A review

Root canal therapy has enabled us to save numerous teeth over the years. The most desired outcome of endodontic treatment would be when diseased or nonvital pulp is replaced with healthy pulp tissue that would revitalize the teeth through regenerative endodontics. ‘A search was conducted using the Pubmed and MEDLINE databases for articles with the criteria ‘Platelet rich plasma’, ‘Platelet rich fibrin’, ‘Stem cells’, ‘Natural and artificial scaffolds’ from 1982–2015’. Tissues are organized as three-dimensional structures, and appropriate scaffolding is necessary to provide a spatially correct position of cell location and regulate differentiation, proliferation, or metabolism of the stem cells. Extracellular matrix molecules control the differentiation of stem cells, and an appropriate scaffold might selectively bind and localize cells, contain growth factors, and undergo biodegradation over time. Different scaffolds facilitate the regeneration of different tissues. To ensure a successful regenerative procedure, it is essential to have a thorough and precise knowledge about the suitable scaffold for the required tissue. This article gives a review on the different scaffolds providing an insight into the new developmental approaches on the horizon.

Biological tooth root reconstruction with a scaffold of swine treated dentin matrix

Treated dentin matrix (TDM) is an ideal scaffolding material with odontogenic ability, which is important for supporting cell growth and regeneration of dental tissue.

Demineralized Dentin Matrix Induces Odontoblastic Differentiation of Dental Pulp Stem Cells

The aim of this study was to investigate the effect of demineralized dentin matrix (DDM) on dental pulp stem cells (DPSCs) and the potential of complexes with DPSCs and DDM for mineralized tissue formation. Stem cells derived from the dental pulp of healthy pigs aged 18 months were isolated and cultured. DPSCs were incubated with alpha-minimum essential medium treated with DDM extract at 1 mg/ml (DDM1) or 10 mg/ml (DDM10). The concentrations of 3 growth factors in DDM extract was measured by enzyme-linked immunosorbent assay. Adhesion of DPSCs on DDM and hydroxyapatite-tricalcium phosphate (HA-TCP) surfaces was observed using scanning electron microscopy. Cell proliferation was evaluated with cell counting kit-8 and migration by Transwell migration assays. Odontoblastic differentiation was assessed by alkaline phosphatase (ALP) and alizarin red staining, ALP activity and real-time polymerase chain reaction analysis of markers of ALP, runt-related transcription factor 2, type I collagen, dentin matrix acidic phosphoprotein-1, osteonectin and dentin sialophosphoprotein (DSPP). Finally, DPSCs were combined with DDM and placed subcutaneously in nude mice for 12 weeks; DPSCs combined with HA-TCP and DDM alone served as controls. DDM could promote DPSC adhesion, migration and odontoblastic differentiation. Mineralized tissue formation was observed with the DPSC and DDM combination and the DPSC and HA-TCP combination. The mineralized tissue of the DPSC + DDM combination stained positive for DSPP, similar to the dentin tissue. These results indicate that DDM induces DPSC odontoblastic differentiation, suggesting applications for dentin regeneration.

Bone marrow-derived stromal cells are more beneficial cell sources for tooth regeneration compared with adipose-derived stromal cells

Tooth loss is presently a global epidemic and tooth regeneration is thought to be a feasible and ideal treatment approach. Choice of cell source is a primary concern in tooth regeneration. In this study, the odontogenic differentiation potential of two non-dental-derived stem cells, adipose-derived stromal cells (ADSCs) and bone marrow-derived stromal cells (BMSCs), were evaluated both in vitro and in vivo. ADSCs and BMSCs were induced in vitro in the presence of tooth germ cell-conditioned medium (TGC-CM) prior to implantation into the omentum majus of rats, in combination with inactivated dentin matrix (IDM). Real-time quantitative polymerase chain reaction (RT-qPCR) was used to detect the mRNA expression levels of odontogenic-related genes. Immunofluorescence and immunohistochemical assays were used to detect the protein levels of odontogenic-specific genes, such as DSP and DMP-1 both in vitro and in vivo. The results suggest that both ADSCs and BMSCs have odontogenic differentiation potential. However, the odontogenic potential of BMSCs was greater compared with ADSCs, showing that BMSCs are a more appropriate cell source for tooth regeneration.

Nanofibrous spongy microspheres enhance odontogenic differentiation of human dental pulp stem cells

Dentin regeneration is challenging due to its complicated anatomical structure and the shortage of odontoblasts. In this study, a novel injectable cell carrier, nanofibrous spongy microspheres (NF-SMS), is developed for dentin regeneration. Biodegradable and biocompatible poly(l-lactic acid)-block-poly(l-lysine) are synthesized and fabricated into NF-SMS using self-assembly and thermally induced phase separation techniques. It is hypothesized that NF-SMS with interconnected pores and nanofibers can enhance the proliferation and odontogenic differentiation of human dental pulp stem cells (hDPSCs), compared to nanofibrous microspheres (NF-MS) without pore structure and conventional solid microspheres (S-MS) with neither nanofibers nor pore structure. During the first 9 d in culture, hDPSCs proliferate significantly faster on NF-SMS than on NF-MS or S-MS (p < 0.05). Following in vitro odontogenic induction, all the examined odontogenic genes (alkaline phosphatase content, osteocalcin, bone sialoprotein, collagen 1, dentin sialophosphoprotein (DSPP)), calcium content, and DSPP protein content are found significantly higher in the NF-SMS group than in the control groups. Furthermore, 6 weeks after subcutaneous injection of hDPSCs and microspheres into nude mice, histological analysis shows that NF-SMS support superior dentin-like tissue formation compared to NF-MS or S-MS. Taken together, NF-SMS have great potential as an injectable cell carrier for dentin regeneration.

CAD based design sensitivity analysis and shape optimization of scaffolds for bio-root regeneration in swine

Tooth root supports dental crown and bears occlusal force. While proper root shape and size render the force being evenly delivered and dispersed into jawbone. Yet it remains unclear what shape and size of a biological tooth root (bio-root), which is mostly determined by the scaffold geometric design, is suitable for stress distributing and mastication performing. Therefore, this study hypothesized scaffold fabricated in proper shape and size is better for regeneration of tooth root with approving biomechanical functional features. In this study, we optimized shape and size of scaffolds for bio-root regeneration using computer aided design (CAD) modeling and finite element analysis (FEA). Statical structural analysis showed the total deformation (TD) and equivalent von-mises stress (EQV) of the restored tooth model mainly concentrated on the scaffold and the post, in accordance with the condition in a natural post restored tooth. Design sensitivity analysis showed increasing the height and upper diameter of the scaffold can tremendously reduce the TD and EQV of the model, while increasing the bottom diameter of scaffold can, to some extent, reduce the EQV in post. However, increase on post height had little influence on the whole model, only slightly increased the native EQV stress in post. Through response surface based optimization, we successfully screened out the optimal shape of the scaffold used in tissue engineering of tooth root. The optimal scaffold adopted a slightly tapered shape with the upper diameter of 4.9 mm, bottom diameter of 3.4 mm; the length of the optimized scaffold shape was 9.4 mm. While the analysis also suggested a height of about 9 mm for a metal post with a diameter of 1.4 mm suitable for crown restoration in bio-root regeneration. In order to validate the physiological function of the shape optimized scaffold in vivo, we transplanted the shape optimized treated dentin matrix (TDM) scaffold, seeding with dental stem cells, into alveolar bone of swine and further installed porcelain crown. Results showed that tooth root has not only been successfully regenerated histologically but also performed masticatory function and maintained stable for three months after crown restoration. Our results suggested that TDM scaffold with 9.4 mm in length and 4.9 mm/3.4 mm in upper/bottom diameter is a suitable biological scaffold for tooth root regeneration. These results also provided a recommendable design protocol for fabricating other scaffolds in tooth root reconstruction.

Dental Stem Cells in Pulp Regeneration: Near Future or Long Road Ahead?

Although regenerative endodontic procedures have yielded an impressive body of favorable outcomes, the treatment of necrotic immature permanent teeth in particular remains to be a challenge. Recent advances in dental stem cell (DSC) research have gained increasing insight in their regenerative potential and prospective use in the formation of viable dental tissues. Numerous studies have already reported successful dental pulp regeneration following application of dental pulp stem cells, stem cells from the apical papilla, or dental follicle precursor cells in different in vivo models. Next to responsive cells, dental tissue engineering also requires the support of an appropriate scaffold material, ranging from naturally occurring polymers to treated dentin matrix components. However, the routine use and banking of DSCs still holds some major challenges, such as culture-associated differences, patient-related variability, and the effects of culture medium additives. Only in-depth evaluation of these problems and the implementation of standardized models and protocols will effectively lead to better alternatives for patients who no longer benefit from current treatment protocols.

Comparison of the Odontogenic Differentiation Potential of Dental Follicle, Dental Papilla, and Cranial Neural Crest Cells

INTRODUCTION

During tooth development, cells originating from the neural crest serve as precursors to the cells in the dental follicle and dental papilla. Therefore, the current study aimed to understand the associations of cranial neural crest cells (CNCCs), dental follicle cells (DFCs), and dental papilla cells (DPCs) by performing a parallel comparison to evaluate their odontogenic differentiation capacities.

METHODS

In this study, we harvested the 3 cells from C57/green fluorescent protein-positive mice or embryos and compared the cell morphology, surface antigens, microstructures, and gene and protein expression. Under the odontogenic microenvironments provided by treated dentin matrix, the odontogenic differentiations of the 3 cells were further compared in vitro and in vivo.

RESULTS

The gene levels of DFCs in neurofilament, tubulin, and nestin were close to the DPCs, and in alkaline phosphatase, osteopontin, dentin matrix protein 1, and dentin sialophosphoprotein were the lowest in the 3 cells. However, Western blot results showed that DFCs possessed more similar protein profiles to CNCCs than DPCs, including collagen 1, transforming growth factor beta 1, osteopontin, neurofilament, and dentin matrix protein 1. Meanwhile, DFCs as 1 source of dental stem cells possessed high potency in odontogenic differentiation in vitro. Moreover, similar dentinlike tissues were observed in all 3 groups in vivo.

CONCLUSIONS

CNCCs, DFCs, and DPCs possessed different biological characteristics in odontogenic differentiation.

Complete pulpodentin complex regeneration by modulating the stiffness of biomimetic matrix

Dental caries is one of the most prevalent chronic diseases in all populations. The regeneration of dentin-pulp tissues (pulpodentin) using a scaffold-based tissue engineering strategy is a promising approach to replacing damaged dental structures and restoring their biological functions. However, the current scaffolding design for pulpodentin regeneration does not take into account the distinct difference between pulp and dentin, therefore, is incapable of regenerating a complete tooth-like pulpodentin complex. In this study, we determined that scaffolding stiffness is a crucial biophysical cue to modulate dental pulp stem cell (DPSC) differentiation. The DPSCs on a high-stiffness three-dimensional (3D) nanofibrous gelatin (NF-gelatin) scaffold had more organized cytoskeletons and a larger spreading area than on a low-stiffness NF-gelatin scaffold. In the same differentiation medium, a high-stiffness NF-gelatin facilitated DPSC differentiation to form a mineralized tissue, while a low-stiffness NF-gelatin promoted a soft pulp-like tissue formation from the DPSCs. A facile method was then developed to integrate the low- and high-stiffness gelatin matrices into a single scaffold (S-scaffold) for pulpodentin complex regeneration. A 4-week in vitro experiment showed that biomineralization took place only in the high-stiffness peripheral area and formed a ring-like structure surrounding the non-mineralized central area of the DPSC/S-scaffold construct. A complete pulpodentin complex similar to natural pulpodentin was successfully regenerated after subcutaneous implantation of the DPSC/S-scaffold in nude mice for 4weeks. Histological staining showed a significant amount of extracellular matrix (ECM) formation in the newly formed pulpodentin complex, and a number of blood vessels were observed in the pulp tissue. Taken together, this work shows that modulating the stiffness of the NF-gelatin scaffold is a successful approach to regenerating a complete tooth-like pulpodentin complex.

Human dental pulp stem cells cultured onto dentin derived scaffold can regenerate dentin-like tissue in vivo

Regeneration of dentin tissues in the pulp space of teeth serves the ultimate goal of preserving teeth via endodontic approaches. In recent times, many studies suggested that human dentin scaffolds combined with dental stem cells was a potential strategy for the complete dentin tissue regeneration. In this study, human dental pulp stem cells (DPSCs) were isolated and cultured. Dentin specimens were prepared from human third molars and treated with ethylene diamine tetra-acetic acid and citric acid to remove the smear layer. Then, DPSCs were cultured onto human treated dentin (hTD) and implanted in mouse model for 4, 6 and 8 weeks. The resulting grafts were assessed by hematoxylin and eosin stain and immunohistochemical stains. As a result, DPSCs were supported and induced to regenerate of dentin-like tissues which expressed specific dentin markers such as dentin sialophosphoprotein and dentin matrix protein 1 by combination with hTD in vivo. Furthermore, cells existed in the newly-formed dentin-like tissues also expressed typical human mitochondria antibodies, demonstrated that new tissues originated from human. In conclusion, the obtain results extend hopefully newly-established therapy to apply in endodontics and traumatic dental hard tissues.

Genome-wide gene expression profiles of dental follicle stem cells

OBJECTIVE

Dental stem cells (SCs) will be increasingly used for bone regeneration in the future. Recently, dental follicle cells (DFCs) from retained human third molars have been isolated and characterized as osteogenic progenitors. Although these results are promising for regenerative dentistry, molecular processes during osteogenic differentiation are not yet well understood.

MATERIALS AND METHODS

This study compared DFCs before and during osteogenic differentiation. ALP activity was measured and cells were stained with alizarin red. Real-time RT-PCRs for osteogenic markers were done. The genome-wide expression profile was evaluated using a microarray.

RESULTS

DFCs showed strong mineralization and increased expression of osteogenic marker genes during osteogenic differentiation. A microarray analysis showed regulated genes before and in the process of osteogenic differentiation (day 7). Several regulated genes in DFCs were associated with skeletal development. Bioinformatic analysis revealed a number of factors associated with dental follicle osteogenic differentiation. Osteogenic differentiation affected expression levels of the transcriptional regulators FOXC2 and ZNF219.

CONCLUSION

In conclusion, the results yielded new objectives for further studies on transcription factors like FOXC2 or ETV1 and their role in dental SCs during osteogenic differentiation.

Human Umbilical Cord Mesenchymal Stem Cells: A New Therapeutic Option for Tooth Regeneration

Tooth regeneration is considered to be an optimistic approach to replace current treatments for tooth loss. It is important to determine the most suitable seed cells for tooth regeneration. Recently, human umbilical cord mesenchymal stem cells (hUCMSCs) have been regarded as a promising candidate for tissue regeneration. However, it has not been reported whether hUCMSCs can be employed in tooth regeneration. Here, we report that hUCMSCs can be induced into odontoblast-like cells in vitro and in vivo. Induced hUCMSCs expressed dentin-related proteins including dentin sialoprotein (DSP) and dentin matrix protein-1 (DMP-1), and their gene expression levels were similar to those in native pulp tissue cells. Moreover, DSP- and DMP-1-positive calcifications were observed after implantation of hUCMSCs in vivo. These findings reveal that hUCMSCs have an odontogenic differentiation potency to differentiate to odontoblast-like cells with characteristic deposition of dentin-like matrix in vivo. This study clearly demonstrates hUCMSCs as an alternative therapeutic cell source for tooth regeneration.

Cementum and Periodontal Ligament Regeneration

The unique anatomy and composition of the periodontium make periodontal tissue healing and regeneration a complex process. Periodontal regeneration aims to recapitulate the crucial stages of wound healing associated with periodontal development in order to restore lost tissues to their original form and function and for regeneration to occur, healing events must progress in an ordered and programmed sequence both temporally and spatially, replicating key developmental events. A number of procedures have been employed to promote true and predictable regeneration of the periodontium. Principally, the approaches are based on the use of graft materials to compensate for the bone loss incurred as a result of periodontal disease, use of barrier membranes for guided tissue regeneration and use of bioactive molecules. More recently, the concept of tissue engineering has been integrated into research and applications of regenerative dentistry, including periodontics, to aim to manage damaged and lost oral tissues, through reconstruction and regeneration of the periodontium and alleviate the shortcomings of more conventional therapeutic options. The essential components for generating effective cellular based therapeutic strategies include a population of multi-potential progenitor cells, presence of signalling molecules/inductive morphogenic signals and a conductive extracellular matrix scaffold or appropriate delivery system. Mesenchymal stem cells are considered suitable candidates for cell-based tissue engineering strategies owing to their extensive expansion rate and potential to differentiate into cells of multiple organs and systems. Mesenchymal stem cells derived from multiple tissue sources have been investigated in pre-clinical animal studies and clinical settings for the treatment and regeneration of the periodontium.

Dental follicle cells rescue the regenerative capacity of periodontal ligament stem cells in an inflammatory microenvironment

Aims

Periodontal ligament stem cells (PDLSCs) are one of the best candidates for periodontal regeneration. Their function could be impaired in periodontitis microenvironment. Dental follicle cells (DFCs), serving as precursor cells and mesenchymal stem cells, have intimate connection with PDLSCs. However, it is still unknown whether DFCs could provide a favorable microenvironment to improve the proliferation and differentiation capacity of PDLSCs from healthy subjects (HPDLSCs) and patients diagnosed with periodontitis (PPDLSCs).

Methods

HPDLSCs, PPDLSCs and DFCs were harvested and identified using microscopic and flow cytometric analysis. Then, the coculture systems of DFCs/HPDLSCs and DFCs/PPDLSCs were established with 0.4 µm transwell, in which all the detection indexs were obtained from HPDLSCs and PPDLSCs. The expression of stemness-associated genes was detected by real-time PCR, and the proliferation ability was assessed using colony formation and cell cycle assays. The osteogenic differentiation capacity was evaluated by real-time PCR, western blot, ALP activity, Alizarin Red S staining and calcium level analysis, while the adipogenic differentiation capacity was determined by real-time PCR and Oil Red O staining. The cell sheet formation in vitro was observed by HE staining and SEM, and the implantation effect in vivo was evaluated using HE staining and Masson’s trichrome staining.

Results

PPDLSCs had a greater proliferation capability but lower osteogenic and adipogenic potential than HPDLSCs. DFCs enhanced the proliferation and osteogenic/adipogenic differentiation of HPDLSCs and PPDLSCs to different degrees. Moreover, coculture with DFCs increased cell layers and extracellular matrix of HPDLSCs/PPDLSCs cell sheets in vitro and improved periodontal regeneration by HPDLSCs/PPDLSCs in vivo.

Conclusions

Our data suggest that the function of PPDLSCs could be damaged in the periodontitis microenvironment. DFCs appear to enhance the self-renewal and multi-differentiation capacity of both HPDLSCs and PPDLSCs, which indicates that DFCs could provide a beneficial microenvironment for periodontal regeneration using PDLSCs.

Hertwig's epithelial root sheath cells regulate osteogenic differentiation of dental follicle cells through the Wnt pathway

The development of periodontal ligament-cementum complex (PLCC) originates from the interaction between epithelial cells of Hertwig's epithelial root sheath (HERS) and mesenchymal cells of the dental follicle. While previous studies have suggested that the Wnt pathway is involved in osteogenic differentiation of dental follicle cells (DFCs) during tooth root development, its involvement in the interaction between DFCs and HERS cells (HERSCs) in tooth root mineralization remains unclear. Here, we investigated the hypothesis that HERSCs control osteogenic differentiation of DFCs via the Wnt pathway. We found that during co-culture with HERSCs, DFCs exhibited a greater tendency to form mineralized nodules. Moreover, under these conditions, DFCs expressed high levels of cementoblast/osteoblast differentiation-related markers, such as bone sialoprotein (BSP) and osteocalcin (OCN), the periodontal ligament phenotype-related gene type I collagen (COL1), and β-catenin (CTNNB1), a core player in the canonical Wnt pathway. In contrast, expression in DFCs of alkaline phosphatase (ALP) was greatly decreased in the presence of HERSCs. Expression of CTNNB1 in DFCs was stimulated by Wnt3a, a representative canonical member of the Wnt family of ligands, but suppressed by Dickkopf1 (DKK1), a Wnt/CTNNB1 signaling inhibitor. Furthermore, in the presence of treated dentin matrix (TDM), differentiation of DFCs was enhanced by Wnt3a when they were in direct contact with HERSCs, but was curtailed by DKK1. Taken together, these results indicate that during tooth root formation, HERSCs induce osteogenic differentiation of DFCs in a process involving the Wnt pathway and the dentin matrix. Our study not only contributes to our understanding of tooth root development and diseases of tooth root mineralization, but also proffers a novel potential strategy for controlling mineralization during tooth root regeneration.

Wnt/β-catenin pathway regulates cementogenic differentiation of adipose tissue-deprived stem cells in dental follicle cell-conditioned medium

The formation and attachment of new cementum is crucial for periodontium regeneration. Tissue engineering is currently explored to achieve complete, reliable and reproducible regeneration of the periodontium. The capacity of multipotency and self-renewal makes adipose tissue-deprived stem cells (ADSCs) an excellent cell source for tissue regeneration and repair. After rat ADSCs were cultured in dental follicle cell-conditioned medium (DFC-CM) supplemented with DKK-1, an inhibitor of the Wnt pathway, followed by 7 days of induction, they exhibited several phenotypic characteristics of cementoblast lineages, as indicated by upregulated expression levels of CAP, ALP, BSP and OPN mRNA, and accelerated expression of BSP and CAP proteins. The Wnt/β-catenin signaling pathway controls differentiation of stem cells by regulating the expression of target genes. Cementoblasts share phenotypical features with osteoblasts. In this study, we demonstrated that culturing ADSCs in DFC-CM supplemented with DKK-1 results in inhibition of β-catenin nuclear translocation and down-regulates TCF-4 and LEF-1 mRNA expression levels. We also found that DKK-1 could promote cementogenic differentiation of ADSCs, which was evident by the up-regulation of CAP, ALP, BSP and OPN gene expressions. On the other hand, culturing ADSCs in DFC-CM supplemented with 100 ng/mL Wnt3a, which activates the Wnt/β-catenin pathway, abrogated this effect. Taken together, our study indicates that the Wnt/β-catenin signaling pathway plays an important role in regulating cementogenic differentiation of ADSCs cultured in DFC-CM. These results raise the possibility of using ADSCs for periodontal regeneration by modifying the Wnt/β-catenin pathway.

Domain of dentine sialoprotein mediates proliferation and differentiation of human periodontal ligament stem cells

Classic embryological studies have documented the inductive role of root dentin on adjacent periodontal ligament differentiation.  The biochemical composition of root dentin includes collagens and cleavage products of dentin sialophosphoprotein (DSPP), such as dentin sialoprotein (DSP).  The high abundance of DSP in root dentin prompted us to ask the question whether DSP or peptides derived thereof would serve as potent biological matrix components to induce periodontal progenitors to further differentiate into periodontal ligament cells. Here, we test the hypothesis that domain of DSP influences cell fate. In situ hybridization and immunohistochemical analyses showed that the COOH-terminal DSP domain is expressed in mouse periodontium at various stages of root development. The recombinant COOH-terminal DSP fragment (rC-DSP) enhanced attachment and migration of human periodontal ligament stem cells (PDLSC), human primary PDL cells without cell toxicity. rC-DSP induced PDLSC cell proliferation as well as differentiation and mineralization of PDLSC and PDL cells by formation of mineralized tissue and ALPase activity. Effect of rC-DSP on cell proliferation and differentiation was to promote gene expression of tooth/bone-relate markers, transcription factors and growth factors. The results for the first time showed that rC-DSP may be one of the components of cell niche for stimulating stem/progenitor cell proliferation and differentiation and a natural scaffold for periodontal regeneration application.

Enhanced bone formation during healing process of tooth sockets filled with demineralized human dentine matrix

BACKGROUND

Orthodontic procedures are often limited by the presence of bone defects caused by trauma, periodontal diseases or surgeries, thus requiring the development of materials capable to compensate such deficiencies. Since bone morphogenetic proteins (BMPs) are indicative of bone reconstitution, this study aimed to evaluate histological and immunohistochemically the temporal location of BMP-2 and BMP-4 in osteoblasts of rat alveolar wounds filled with demineralized human dentine matrix (DHDM), used as a graft material.

METHODS

After extraction of the upper second molars, the left side alveoli were filled with DHDM and the right side served as the control. The animals were euthanized after 3, 5, 10 and 14 days of surgery. After fixation, demineralization and paraffin embedding, representative samples of each group were stained with H&E and immunohistochemically evaluated.

RESULTS

The data showed a statistically significant (p < 0.05) increased number of osteoblasts positively immunostained for BMP-2 and BMP-4 on the experimental side (left) at 10 days. Our results also showed that even when not degraded, dentine matrix was incorporated to new bone formation after 14 days of surgery.

CONCLUSIONS

The results suggest that DHDM acts as a scaffold for osteoblast differentiation, actively yielding new bone formation, and it may represent an effective bone implant material.

Comparative Study of Human Dental Follicle Cell Sheets and Periodontal Ligament Cell Sheets for Periodontal Tissue Regeneration

Periodontal ligament cell (PDLC) sheets have been shown to contribute to periodontal tissue regeneration. Dental follicle cells (DFCs), acknowledged as the precursor cells of PDLCs, have demonstrated stemness, embryonic features, heterogeneity, and pluripotency. Therefore, we hypothesized that DFC sheets might be more effective and suitable for periodontal tissue regeneration than PDLC sheets. In this study, we compared the biological characteristics of DFC sheets and PDLC sheets in vitro. To investigate the potential for periodontal tissue regeneration in vivo, complexes composed of two types of cell sheets combined with dentin matrix were implanted subcutaneously into nude mice for 6 weeks. Our results showed that, when forming cell sheets, DFCs secreted richer extracellular matrix than PDLCs. And compared to DFCs, DFC sheets expressed high levels of calcification-related genes, including alkaline phosphatase ( alp), bone sialoprotein ( bsp), osteopontin ( opn), runt-related transcription factor ( runx2), as well as the periodontal ligament-specific genes collagen III ( col III) and periostin, while the gene expression of bsp, osteocalcin ( ocn), and opn were greatly increased in PDLC sheets, when compared to PDLCs. col I expression did not change significantly. However, cementum protein 23 ( cp-23) expression increased several fold in PDLC sheets compared to PDLCs but decreased in DFC sheets compared to DFCs. DFC and PDLC sheets were both positive for Collagen I (Col I), cementum attachment protein (CAP), ALP, BSP, OCN, and OPN protein expression, and Col I, ALP, BSP, and OPN expression were increased after cell sheets were formed. Furthermore, the levels of laminin and fibronectin were higher in DFCs and DFC sheets than that of PDLCs and PDLC sheets, respectively. In vivo, DFC and PDLC sheets could both regenerate periodontal tissue-like structures, but DFC sheets demonstrated stronger periodontal regeneration potential than PDLC sheets. Therefore, DFC sheets derived from discarded dental follicle tissue after tooth extraction may be more advantageous for clinical periodontal tissue regeneration in the future.

Comparison of odontogenic differentiation of human dental follicle cells and human dental papilla cells

Classical tooth development theory suggests that dental papilla cells (DPCs) are the precursor cells of odontoblasts, which are responsible for dentin development. However, our previous studies have indicated that dental follicle cells (DFCs) can differentiate into odontoblasts. To further our understanding of tooth development, and the differences in dentinogenesis between DFCs and DPCs, the odontogenic differentiation of DFCs and DPCs was characterized in vitro and in vivo. DFCs and DPCs were individually combined with treated dentin matrix (TDM) before they were subcutaneously implanted into the dorsum of mice for 8 weeks. Results showed that 12 proteins were significantly differential, and phosphoserine aminotransferase 1 (PSAT1), Isoform 2 of hypoxia-inducible factor 1-alpha (HIF1A) and Isoform 1 of annexin A2 (ANXA2), were the most significantly differential proteins. These proteins are related to regulation of bone balance, angiogenesis and cell survival in an anoxic environment. Both DFCs and DPCs express odontogenic, neurogenic and peridontogenic markers. Histological examination of the harvested grafts showed that both DFCs and DPCs form pulp-dentin/cementum-periodentium-like tissues in vivo. Hence, DFCs and DPCs have similar odontogenic differentiation potential in the presence of TDM. However, differences in glucose and amino acid metabolism signal transduction and protein synthesis were observed for the two cell types. This study expands our understanding on tooth development, and provides direct evidence for the use of alternative cell sources in tooth regeneration.

Redundant miR-3077-5p and miR-705 mediate the shift of mesenchymal stem cell lineage commitment to adipocyte in osteoporosis bone marrow

During the process of aging, especially for postmenopausal females, the cell lineage commitment of mesenchymal stem cells (MSCs) shift to adipocyte in bone marrow, resulting in osteoporosis. However, the cell-intrinsic mechanism of this cell lineage commitment switch is poorly understood. As the post-transcription regulation by microRNAs (miRNAs) has a critical role in MSCs differentiation and bone homeostasis, we performed comprehensive miRNAs profiling and found miR-705 and miR-3077-5p were significantly enhanced in MSCs from osteoporosis bone marrow. Both miR-705 and miR-3077-5p acted as inhibitors of MSCs osteoblast differentiation and promoters of adipocyte differentiation, by targeting on the 3'untranslated region (3'UTR) of HOXA10 and RUNX2 mRNA separately. Combined inhibition of miR-705 and miR-3077-5p rescued the cell lineage commitment disorder of MSCs through restoring HOXA10 and RUNX2 protein level. Furthermore, we found excessive TNFα and reactive oxygen species caused by estrogen deficiency led to the upregulation of both miRNAs through NF-κB pathway. In conclusion, our findings showed that redundant miR-705 and miR-3077-5p synergistically mediated the shift of MSCs cell lineage commitment to adipocyte in osteoporosis bone marrow, providing new insight into the etiology of osteoporosis at the post-transcriptional level. Moreover, the rescue of MSCs lineage commitment disorder by regulating miRNAs expression suggested a novel potential therapeutic target for osteoporosis as well as stem cell-mediated regenerative medicine.

Differentiation of BMMSCs into odontoblast-like cells induced by natural dentine matrix

OBJECTIVE

To assess the odontogenic potential of bone marrow mesenchymal stem cells (BMMSCs) to differentiate into odontoblast-like cells under the morphogenetic influence of dentine matrix as a possible basis for new stem cell-mediated therapeutic approaches to pulp diseases.

DESIGN

BMMSCs were harvested from the whole bone marrow and cells at passages 3-5 were used for subsequent experiments. For in vitro studies, 1×10(4) cells were seeded on the surface of dentine slabs and co-cultured for 2 weeks in 24-well plates, then fixed, decalcified, embedded in paraffin and serial sections were processed for analyses. Haematoxylin-eosin (HE) staining was used for the morphological analysis of BMMSCs on the dentine slabs. The protein expression of dentine sialoprotein (DSP) in co-cultured BMMSCs was detected by immunohistochemical (IHC) staining. For in vivo studies, 5×10(6) cells were collected as cell pellets, seeded onto dentine slices and transplanted into renal capsules for 6 weeks. Histological analyses of harvested tissues were performed as described for the in vitro studies. Total RNA and protein were extracted from harvested tissues and Dspp/DSP expression was investigated by reverse transcription-polymerase chain reaction (RT-PCR) and Western blot, respectively.

RESULTS

After 2 weeks of co-culture with dentine slabs, BMMSCs demonstrated good viability in terms of morphological appearance and some showed polarization and extension of their cytoplasmic processes into dentine tubules with DSP expression. In vivo study demonstrated similar morphological changes and DSP expression in cells adjacent to dentine. RT-PCR and Western blot also demonstrated that the expression of Dspp/DSP in the co-cultured BMMSCs groups was higher than in the control groups.

CONCLUSION

Dentine matrix can signal morphogenic induction of differentiation of BMMSCs into odontoblast-like cells in vivo and in vitro.