Bone regeneration with micro/nano hybrid-structured biphasic calcium phosphate bioceramics at segmental bone defect and the induced immunoregulation of MSCs

Human Teeth-Derived Bioceramics for Improved Bone Regeneration

Hydroxyapatite (HAp, Ca10(PO4)6(OH)2) is one of the most promising candidates of the calcium phosphate family, suitable for bone tissue regeneration due to its structural similarities with human hard tissues. However, the requirements of high purity and the non-availability of adequate synthetic techniques limit the application of synthetic HAp in bone tissue engineering. Herein, we developed and evaluated the bone regeneration potential of human teeth-derived bioceramics in mice's defective skulls. The developed bioceramics were analyzed by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, and scanning electron microscopy (FE-SEM). The developed bioceramics exhibited the characteristic peaks of HAp in FTIR and XRD patterns. The inductively coupled plasma mass spectrometry (ICP-MS) technique was applied to determine the Ca/P molar ratio in the developed bioceramics, and it was 1.67. Cytotoxicity of the simulated body fluid (SBF)-soaked bioceramics was evaluated by WST-1 assay in the presence of human alveolar bone marrow stem cells (hABMSCs). No adverse effects were observed in the presence of the developed bioceramics, indicating their biocompatibility. The cells adequately adhered to the bioceramics-treated media. Enhanced bone regeneration occurred in the presence of the developed bioceramics in the defected skulls of mice, and this potential was profoundly affected by the size of the developed bioceramics. The bioceramics-treated mice groups exhibited greater vascularization compared to control. Therefore, the developed bioceramics have the potential to be used as biomaterials for bone regeneration application.

Construction of Biomimetic Natural Wood Hierarchical Porous-Structure Bioceramic with Micro/Nanowhisker Coating to Modulate Cellular Behavior and Osteoinductive Activity

Scaffolds with a biomimetic hierarchy micro/nanoscale pores play an important role in bone tissue regeneration. In this study, multilevel porous calcium phosphate (CaP) bioceramic orthopedic implants were constructed to mimic the micro/nanostructural hierarchy in natural wood. The biomimetic hierarchical porous scaffolds were fabricated by combining three-dimensional (3D) printing technology and hydrothermal treatment. The first-level macropores (∼100-600 μm) for promoting bone tissue ingrowth were precisely designed using a set of 3D printing parameters. The second-level micro/nanoscale pores (∼100-10,000 nm) in the scaffolds were obtained by hydrothermal treatment to promote nutrient/metabolite transportation. Micro- and nanoscale-sized pores in the scaffolds were recognized as in situ formation of whiskers, where the shape, diameter, and length of whiskers were modulated by adjusting the components of calcium phosphate ceramics and hydrothermal treatment parameters. These biomimetic natural wood-like hierarchical structured scaffolds demonstrated unique physical and biological properties. Hydrophilicity and the protein adsorption rate were characterized in these scaffolds. In vitro studies have identified micro/nanowhisker coating as potent modulators of cellular behavior through the onset of focal adhesion formation. In addition, histological results indicate that biomimetic scaffolds with porous natural wood hierarchical pores exhibited good osteoinductive activity. In conclusion, these findings combined suggested that micro/nanowhisker coating is a critical factor to modulate cellular behavior and osteoinductive activity.

Bio-activating ultrafine grain titanium: RNA sequencing reveals enhanced mechano-activation of osteoconduction on nanostructured substrates

Titanium is essentially absent from biological systems yet reliably integrates into bone. To achieve osseointegration, titanium must activate biological processes without entering cells, defining it as a bio-activating material. Nanostructuring bulk titanium reduces grain size, increases strength, and improves other quantifiable physical properties, including cytocompatibility. The biological processes activated by increasing grain boundary availability were detected with total RNA-sequencing in mouse pre-osteoblasts grown for 72 hours on nanometrically smooth substrates of either coarse grain or nanostructured ultrafine grain titanium. The average grain boundary length under cells on the conventional coarse grain substrates is 273.0 μm, compared to 70,881.5 μm for cells adhered to the nanostructured ultrafine grain substrates; a 260-fold difference. Cells on both substrates exhibit similar expression profiles for genes whose products are critical for mechanosensation and transduction of cues that trigger osteoconduction. Biological process Gene Ontology term enrichment analysis of differentially expressed genes reveals that cell cycle, chromatin modification, telomere maintenance, and RNA metabolism processes are upregulated on ultrafine grain titanium. Processes related to immune response, including apoptosis, are downregulated. Tumor-suppressor genes are upregulated while tumor-promoting genes are downregulated. Upregulation of genes involved in chromatin remodeling and downregulation of genes under the control of the peripheral circadian clock implicate both processes in the transduction of mechanosensory information. Non-coding RNAs may also play a role in the response. Merging transcriptomics with well-established mechanobiology principles generates a unified model to explain the bio-activating properties of titanium. The modulation of processes is accomplished through chromatin remodeling in which the nucleus responds like a rheostat to grain boundary concentration. This convergence of biological and materials science reveals a pathway toward understanding the biotic-abiotic interface and will inform the development of effective bio-activating and bio-inactivating materials.

Complexation of Injectable Biphasic Calcium Phosphate with Phosphoserine-Presenting Dendrons with Enhanced Osteoregenerative Properties

Injectable biphasic calcium phosphates have been proposed as a solution in the treatment of a range of clinical applications including as fillers in the augmentation of osteoporotic bone. To date, various biodegradable natural or synthetic organics have been used as a polymer component of bone materials to increase their cohesiveness. Herein, a novel bone material was developed combining osteoconductive biphasic calcium phosphate (BCP) nanoparticles with phosphoserine-tethered generation 3 poly(epsilon-lysine) dendron (G3-K PS), a class of hyperbranched peptides previously shown to induce biomineralization and stem cell osteogenic differentiation. Strontium was also incorporated into the BCP nanocrystals (SrBCP) to prevent bone resorption. Within 24 h, an antiwashout behavior was observed in G3-K PS-integrated pure BCP group (BCPG3). Moreover, both in vitro tests by relevant cell phenotypes and an in vivo tissue regeneration study by an osteoporotic animal bone implantation showed that the integration of G3-K PS would downregulate Cxcl9 gene and protein expressions, thus enhancing bone regeneration measured as bone mineral density, new bone volume ratio, and trabecular microarchitectural parameters. However, no synergistic effect was found when Sr was incorporated into the BCPG3 bone pastes. Notably, results indicated a concomitant reduction of bone regeneration potential assessed as reduced Runx2 and PINP expression when bone resorptive RANKL and CTX-I levels were reduced by Sr supplementation. Altogether, the results suggest the potential of injectable BCPG3 bone materials in the treatment of osteoporotic bone defects.

Pre-Clinical Evaluation of Biological Bone Substitute Materials for Application in Highly Loaded Skeletal Sites

The development of bone substitute materials (BSMs) intended for load-bearing bone defects is highly complicated, as biological and mechanical requirements are often contradictory. In recent years, biological BSMs have been developed which allow for a more efficient integration of the material with the surrounding osseous environment and, hence, a higher mechanical stability of the treated defect. However, while these materials are promising, they are still far from ideal. Consequently, extensive preclinical experimentation is still required. The current review provides a comprehensive overview of biomechanical considerations relevant for the design of biological BSMs. Further, the preclinical evaluation of biological BSMs intended for application in highly loaded skeletal sites is discussed. The selected animal models and implantation site should mimic the pathophysiology and biomechanical loading patterns of human bone as closely as possible. In general, sheep are among the most frequently selected animal models for the evaluation of biomaterials intended for highly loaded skeletal sites. Regarding the anatomical sites, segmental bone defects created in the limbs and spinal column are suggested as the most suitable. Furthermore, the outcome measurements used to assess biological BSMs for regeneration of defects in heavily loaded bone should be relevant and straightforward. The quantitative evaluation of bone defect healing through ex vivo biomechanical tests is a valuable addition to conventional in vivo tests, as it determines the functional efficacy of BSM-induced bone healing. Finally, we conclude that further standardization of preclinical studies is essential for reliable evaluation of biological BSMs in highly loaded skeletal sites.

Sol-gel-assisted micro-arc oxidation synthesis and characterization of a hierarchically rough structured Ta-Sr coating for biomaterials

Tantalum (Ta) is an element with high chemical stability and ductility that is used in orthopedic biomaterials. When utilized, it can produce a bioactive surface and enhance cell-material interactions, but currently, there exist scarce effective methods to introduce the Ta element onto the surface of implants. This work reported a sol-gel-assisted approach combined with micro-arc oxidation (MAO) to introduce Ta onto the surface of the titanium (TC4) substrate. Specifically, this technique produced a substrate with a hierarchically rough structured topography and introduced strontium ions into the film. The films were uniform and continuous with numerous crater-like micropores. Compared with the TC4 sample (196 ± 35 nm), the roughness of Ta (734 ± 51 nm) and Ta-Sr (728 ± 85 nm) films was significantly higher, and both films (Ta and Ta-Sr) showed increased hydrophilicity when compared with TC4, promoting cell attachment. Additionally, the in vitro experiments indicated that Ta and Ta-Sr films have the potential to enhance the recruitment of cells in the initial culture stages, and improve cell proliferation. Overall, this work demonstrated that the application of Ta and Ta-Sr films to orthopedic implants has the potential to increase the lifetime of the implants. Furthermore, this study also describes an innovative strategy to incorporate Ta into implant films.

Robust and nanostructured chitosan-silica hybrids for bone repair application

In this study, chitosan-silica hybrids (CSHs) with superior mechanical strength and homogeneous dispersion of nano-sized silica particles were synthesized via a facile sol-gel method aiming for bone regeneration. The effects of varied acidic conditions of sol-gel reaction and inorganic/organic ratios on the performance of the hybrid were investigated. CSHs synthesized under weak acidic conditions (acetic acid, pH 4.0) showed a homogeneous nanostructure and robust strength (maximum compressive strength: 42.6 ± 3.3 MPa and 271 ± 31 MPa in wet and dry forms, respectively). However, those developed under the strong acidic condition (HCl, pH 4.0) and the strong acid condition plus lower pH (HCl, pH 2.8) tended to aggregate and exhibited inferior mechanical properties (compressive strength: 6.3 ± 0.3 MPa in wet form at pH 2.8). Under the latter conditions, the interactions between silica and chitosan were weak. Moreover, the mechanical properties of the CSHs could be tuned in a wide range by conveniently varying the inorganic/organic composition ratio between 50% and 70%. In vitro cytocompatibility study indicated that CSHs were non-cytotoxic. These results suggested that the weak acidic sol-gel process were essential for fabricating chitosan-silica hybrids with high mechanical strength, which had potential to be applied as a bone substitute.

Osteoimmunomodulatory effects of biomaterial modification strategies on macrophage polarization and bone regeneration

Biomaterials as bone substitutes are always considered as foreign bodies that can trigger host immune responses. Traditional designing principles have been always aimed at minimizing the immune reactions by fabricating inert biomaterials. However, clinical evidence revealed that those methods still have limitations and many of which were only feasible in the laboratory. Currently, osteoimmunology, the very pioneering concept is drawing more and more attention-it does not simply regard the immune response as an obstacle during bone healing but emphasizes the intimate relationship of the immune and skeletal system, which includes diverse cells, cytokines, and signaling pathways. Properties of biomaterials like topography, wettability, surface charge, the release of cytokines, mediators, ions and other bioactive molecules can impose effects on immune responses to interfere with the skeletal system. Based on the bone formation mechanisms, the designing methods of the biomaterials change from immune evasive to immune reprogramming. Here, we discuss the osteoimmunomodulatory effects of the new modification strategies-adjusting properties of bone biomaterials to induce a favorable osteoimmune environment. Such strategies showed potential to benefit the development of bone materials and lay a solid foundation for the future clinical application.

Injectable calcium phosphate ceramics prevent osteoclastic differentiation and osteoporotic bone loss: Potential applications for regional osteolysis

Calcium phosphates (CaPs) in the form of blocks are typically not satisfied for administration to osteoporotic patients because of their rapid resorption rate in vivo. However, injectable CaP powders have not been investigated for their potential in osteoporotic hosts. Herein, CaPs in the form of nanoparticles was reported can inhibit RANKL-stimulated osteoclastic differentiation (OC) and bone resorption, as evidenced by suppressed TRAP-positive cells, disintegrated F-actin rings and downregulated expression of markers for OC. CaP powders also significantly inhibited nuclear factor-κB (NF-κB) and nuclear factor of activated T-cells, cytoplasmic 1 (NFATc1) activation. Furthermore, injectable CaPs reversed bone loss in a mouse model induced by lipopolysaccharide (LPS) and promoted osteoblastic formation in the absent of pro-osteogenic agents. Therefore, injectable CaPs, especially biphasic calcium phosphate (BCP), could be developed as novel agents for the therapy of osteolysis-related diseases caused by inflammation.

The Role of Tantalum Nanoparticles in Bone Regeneration Involves the BMP2/Smad4/Runx2 Signaling Pathway

Background

In recent years, nanomaterials have been increasingly developed and applied in the field of bone tissue engineering. However, there are few studies on the induction of bone regeneration by tantalum nanoparticles (Ta NPs) and no reports on the effects of Ta NPs on the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) and the underlying mechanisms. The main purpose of this study was to investigate the effects of Ta NPs on bone regeneration and BMSC osteogenic differentiation and the underlying mechanisms.

Materials and Methods

The effects of Ta NPs on bone regeneration were evaluated in an animal experiment, and the effects of Ta NPs on osteogenic differentiation of BMSCs and the underlying mechanisms were evaluated in cell experiments. In the animal experiment, hematoxylin-eosin (HE) staining and hard-tissue section analysis showed that Ta NPs promoted bone regeneration, and immunohistochemistry revealed elevated expression of BMP2 and Smad4 in cells cultured with Ta NPs.

Results

The results of the cell experiments showed that Ta NPs promoted BMSC proliferation, alkaline phosphatase (ALP) activity, BMP2 secretion and extracellular matrix (ECM) mineralization, and the expression of related osteogenic genes and proteins (especially BMP2, Smad4 and Runx2) was upregulated under culture with Ta NPs. Smad4 expression, ALP activity, ECM mineralization, and osteogenesis-related gene and protein expression decreased after inhibiting Smad4.

Conclusion

These data suggest that Ta NPs have an osteogenic effect and induce bone regeneration by activating the BMP2/Smad4/Runx2 signaling pathway, which in turn causes BMSCs to undergo osteogenic differentiation. This study provides insight into the molecular mechanisms underlying the effects of Ta NPs in bone regeneration.

Osteogenic, Angiogenic, and Antibacterial Bioactive Nano-Hydroxyapatite Co-Synthesized Using γ-Polyglutamic Acid and Copper

Nano-antibacterial calcium phosphate (CaP) has attracted intense attention with regard to its wide variety of medical and biological applications. The γ-polyglutamic acid and copper cosynthesized hydroxyapatite (γ-PGA/Cu_xHAp) was synthesized using the wet method. Structural and chemical characterizations demonstrate that copper was quantitatively incorporated into the hydroxyapatite structure, and the degree of Cu substitution was up to 20 mol % in the synthesized nanocrystals. Morphology characterization showed that the size of the γ-PGA/Cu_xHAp nanoparticles decreases with the increased copper content. γ-PGA/Cu_xHAp exhibited a steady release of Cu ions. Two experimental protocols were applied to compare the antibacterial activity of the γ-PGA/Cu_xHAp samples. A positive correlation was observed between Cu content and the inhibition of bacterial growth. The study also showed that nanoparticles with smaller particle sizes exhibited higher antibacterial activities than the larger particles. Endothelial and osteoblast cells rapidly proliferated on γ-PGA/Cu_xHAp, whereas high concentrations (20 mol %) of Cu ions reduced cell proliferation. In the rat calvarial defect model, some γ-PGA/Cu_xHAp samples such as γ-PGA/Cu_xHAp (x = 8, 16) showed efficient bone regeneration capacities at 12 weeks post implantation. Thus, the multibiofunctional γ-PGA/Cu_xHAp nanocomposite exhibited degradative, angiogenic, bactericidal and bone regenerative properties, providing a potential means to address some of the critical challenges in the field of bone tissue engineering.

The role of calcium phosphate surface structure in osteogenesis and the mechanisms involved

Calcium phosphate (CaP) ceramics have been widely used for bone regeneration because of their ability to induce osteogenesis. Surface properties, including chemical composition and surface structure, are known to play a crucial role in osteoconduction and osteoinduction. This review systematically analyzes the effects of surface properties, in particular the surface structure, of CaP scaffolds on cell behavior and new bone formation. We also summarize the possible signaling pathways involved in the osteogenic differentiation of bone-related cells when cultured on surfaces with various structures in vitro. The significant immune response initiated by surface structure involved in osteogenic differentiation of cells is also discussed in this review. Taken together, the new biological principle for advanced biomaterials is not only to directly stimulate osteogenic differentiation of bone-related cells but also to modulate the immune response in vivo. Although the reaction mechanism responsible for bone formation induced by CaP surface structure is not clear yet, the insights on surface structure-mediated osteogenic differentiation and osteoimmunomodulation could aid the optimization of CaP-based biomaterials for bone regeneration. STATEMENT OF SIGNIFICANCE: CaP ceramics have similar inorganic composition with natural bone, which have been widely used for bone tissue scaffolds. CaP themselves are not osteoinductive; however, osteoinductive properties could be introduced to CaP materials by surface engineering. This paper systematically summarizes the effects of surface properties, especially surface structure, of CaP scaffolds on bone formation. Additionally, increasing evidence has proved that the bone healing process is not only affected by the osteogenic differentiation of bone-related cells, but also relevant to the the cooperation of immune system. Thus, we further review the possible signaling pathways involved in the osteogenic differentiation and immune response of cells cultured on scaffold surface. These insights into surface structure-mediated osteogenic differentiation and osteoimmunomodulated-based strategy could aid the optimization of CaP-based biomaterials.

Indirect selective laser sintering-printed microporous biphasic calcium phosphate scaffold promotes endogenous bone regeneration via activation of ERK1/2 signaling

The fabrication technique determines the physicochemical and biological properties of scaffolds, including the porosity, mechanical strength, osteoconductivity, and bone regenerative potential. Biphasic calcium phosphate (BCP)-based scaffolds are superior in bone tissue engineering due to their suitable physicochemical and biological properties. We developed an indirect selective laser sintering (SLS) printing strategy to fabricate 3D microporous BCP scaffolds for bone tissue engineering purposes. The green part of the BCP scaffold was fabricated by SLS at a relevant low temperature in the presence of epoxy resin (EP), and the remaining EP was decomposed and eliminated by a subsequent sintering process to obtain the microporous BCP scaffolds. Physicochemical properties, cell adhesion, biocompatibility, in vitro osteogenic potential, and rabbit critical-size cranial bone defect healing potential of the scaffolds were extensively evaluated. This indirect SLS printing eliminated the drawbacks of conventional direct SLS printing at high working temperatures, i.e. wavy deformation of the scaffold, hydroxyapatite decomposition, and conversion of β-tricalcium phosphate (TCP) to α-TCP. Among the scaffolds printed with various binder ratios (by weight) of BCP and EP, the scaffold with 50/50 binder ratio (S4) showed the highest mechanical strength and porosity with the smallest pore size. Scaffold S4 showed the highest effect on osteogenic differentiation of precursor cells in vitro, and this effect was ERK1/2 signaling-dependent. Scaffold S4 robustly promoted precursor cell homing, endogenous bone regeneration, and vascularization in rabbit critical-size cranial defects. In conclusion, BCP scaffolds fabricated by indirect SLS printing maintain the physicochemical properties of BCP and possess the capacity to recruit host precursor cells to the defect site and promote endogenous bone regeneration possibly via the activation of ERK1/2 signaling.

Advanced Black Phosphorus Nanomaterials for Bone Regeneration

Bone regeneration remains a great clinical challenge. Two-dimensional materials, especially graphene and its derivative graphene oxide, have been widely used for bone regeneration. Since its discovery in 2014, black phosphorus (BP) nanomaterials including BP nanosheets and BP quantum dots have attracted considerable scientific attention and are considered as prospective graphene substitutes. BP nanomaterials exhibit numerous advantages such as excellent optical and mechanical properties, electrical conductivity, excellent biocompatibility, and good biodegradation, all of which make them particularly attractive in biomedicine. In this review, we comprehensively summarize recent advances of BP-based nanomaterials in bone regeneration. The advantages are reviewed, the different synthesis methods of BP are summarized, and the applications to promote bone regeneration are highlighted. Finally, the existing challenges and perspectives of BP in bone regeneration are briefly discussed.

The Impact of Bioceramic Scaffolds on Bone Regeneration in Preclinical In Vivo Studies: A Systematic Review

Bioceramic scaffolds are appealing for alveolar bone regeneration, because they are emerging as promising alternatives to autogenous and heterogenous bone grafts. The aim of this systematic review is to answer to the focal question: in critical-sized bone defects in experimental animal models, does the use of a bioceramic scaffolds improve new bone formation, compared with leaving the empty defect without grafting materials or using autogenous bone or deproteinized bovine-derived bone substitutes? Electronic databases were searched using specific search terms. A hand search was also undertaken. Only randomized and controlled studies in the English language, published in peer-reviewed journals between 2013 and 2018, using critical-sized bone defect models in non-medically compromised animals, were considered. Risk of bias assessment was performed using the SYRCLE tool. A meta-analysis was planned to synthesize the evidence, if possible. Thirteen studies reporting on small animal models (six studies on rats and seven on rabbits) were included. The calvarial bone defect was the most common experimental site. The empty defect was used as the only control in all studies except one. In all studies the bioceramic materials demonstrated a trend for better outcomes compared to an empty control. Due to heterogeneity in protocols and outcomes among the included studies, no meta-analysis could be performed. Bioceramics can be considered promising grafting materials, though further evidence is needed.

Bifunctional effect of Zoledronic Acid (ZA) on human mesenchymal stem cells (hMSCs) based on the concentration level

BACKGROUND

Treatment of massive bone defects is a great challenge. Mesenchymal stem cells (MSCs) enhance bone regeneration by differentiating into osteoblasts. Bisphosphonates (BPs) are antiresorptives reducing bone resorption. Despite Medication-related osteonecrosis of the jaw (MRONJ) is a known side effect of antiresorptives, evidences suggest that BPs have positive effect on bone formation. The aims of this study were to investigate the effect of zoledronic acid (ZA) and geranylgeraniol (GGOH) on human mesenchymal stem cells (hMSCs) being a part of the bone microenvironment and evaluate whether low dose of bisphosphonate has enhanced osteogenic differentiation of hMSCs.

MATERIALS AND METHODS

The effect of ZA and GGOH on MSCs was investigated in addition to the effect of low doses of ZA on osteogenic differentiation of MSCs and analysed by WST-1, Live/Dead staining and coefficient of drug index (CDI). The osteogenic differentiation of the cells was confirmed by ALP activity, xylenol orange and alizarin red staining, microarray and PCR with levels of statistical significance indicated at *P<0.05, **P<0.01 and ***P<0.0001.

MAIN FINDINGS

Although, high concentration of ZA had significantly decreased the cell viability in MSCs, GGOH reversed the action of ZA on the cells while at very high concentration; it caused severe reduction in the cell viability. CDI showed antagonism or synergism depending on the concentrations of ZA and GGOH.

CONCLUSION

The treatment of cells with ZA has increased the mineralization and osteogenic differentiation of MSCs. Our study supported the hypothesis that zoledronic acid plays a bifunctional role depending on the concentration.

In Situ Formation of Hexagon-like Column Array Hydroxyapatite on 3D-Plotted Hydroxyapatite Scaffolds by Hydrothermal Method and Its Effect on Osteogenic Differentiation

In the preparation of bioactive bone graft materials, surface topography is essential for the ultimate stem cell response. However, the tunable fabrication of surface topography for 3D bioceramic scaffolds is still a technical problem because of the low processability and high brittleness of bioceramics. In this study, an evenly spaced hexagon-like column array surface was fabricated in situ via a hydrothermal method on 3D plotted hydroxyapatite scaffolds. Compared with the Control scaffolds, hydroxyapatite scaffolds with a hexagon-like column array topography possessed a higher crystal orientation degree and specific surface area, which further enhanced fibronectin adsorption. The array topography on the hydroxyapatite scaffolds also showed good biocompatibility with human adipose-derived stem cells (ADSCs). More importantly, the Array scaffolds significantly promoted the expression levels of osteogenic-related genes and proteins compared with the Control scaffolds. The results suggested that the construction of hexagon-like column array topography might be critical for the design of bone regeneration scaffolds with spontaneous stimulation capacity.

Mineralized collagen-modified PMMA cement enhances bone integration and reduces fibrous encapsulation in the treatment of lumbar degenerative disc disease

As a minimally invasive surgery, percutaneous cement discoplasty (PCD) is now contemplated to treat lumbar disc degeneration disease in elder population. Here, we investigated whether the osteogenic mineralized collagen (MC) modified polymethylmethacrylate (PMMA) cement could be a suitable material in PCD surgery. Injectability, hydrophilicity and mechanical properties of the MC-modified PMMA (PMMA-MC) was characterized. The introduction of MC did not change the application and setting time of PMMA and was easy to be handled in minimally invasive operation. Hydrophilicity of PMMA-MC was greatly improved and its elastic modulus was tailored to complement mechanical performance of bone under dynamic stress. Then, PCD surgery in a goat model with induced disc degeneration was performed with implantation of PMMA-MC or PMMA. Three months after implantation, micro-computed tomography analysis revealed a 36.4% higher circumferential contact index between PMMA-MC and bone, as compared to PMMA alone. Histological staining confirmed that the surface of PMMA-MC was in direct contact with new bone, while the PMMA was covered by fibrous tissue. The observed gathering of macrophages around the implant was suspected to be the cause of fibrous encapsulation. Therefore, the interactions of PMMA and PMMA-MC with macrophages were investigated in vitro. We discovered that the addition of MC could hinder the proliferation and fusion of the macrophages. Moreover, expressions of fibroblast-stimulating growth factors, insulin-like growth factor, basic fibroblast growth factor and tumor necrosis factor-β were significantly down-regulated in the macrophages cocultured with PMMA-MC. Together, the promoted osteointegration and reduced fibrous tissue formation observed with PMMA-MC material makes it a promising candidate for PCD surgery.

Oral Mesenchymal Stem/Progenitor Cells: The Immunomodulatory Masters

Oral mesenchymal stem/progenitor cells (MSCs) are renowned in the field of tissue engineering/regeneration for their multilineage differentiation potential and easy acquisition. These cells encompass the periodontal ligament stem/progenitor cells (PDLSCs), the dental pulp stem/progenitor cells (DPSCs), the stem/progenitor cells from human exfoliated deciduous teeth (SHED), the gingival mesenchymal stem/progenitor cells (GMSCs), the stem/progenitor cells from the apical papilla (SCAP), the dental follicle stem/progenitor cells (DFSCs), the bone marrow mesenchymal stem/progenitor cells (BM-MSCs) from the alveolar bone proper, and the human periapical cyst-mesenchymal stem cells (hPCy-MSCs). Apart from their remarkable regenerative potential, oral MSCs possess the capacity to interact with an inflammatory microenvironment. Although inflammation might affect the properties of oral MSCs, they could inversely exert a multitude of immunological actions to the local inflammatory microenvironment. The present review discusses the current understanding about the immunomodulatory role of oral MSCs both in periodontitis and systemic diseases, their "double-edged sword" uniqueness in inflammatory regulation, their affection of the immune system, and the underlying mechanisms, involving oral MSC-derived extracellular vesicles.

Positive role of calcium phosphate ceramics regulated inflammation in the osteogenic differentiation of mesenchymal stem cells

Recently, researches have confirmed the crucial role of inflammatory response in Ca-P ceramic-induced osteogenesis, however, the underlying mechanism has not yet been fully understood. In this study, BCP and β-TCP ceramics were used as material models to investigate the effect of physicochemical properties on inflammatory response in vitro. The results showed that BCP and β-TCP could support macrophages attachment, proliferation, and spreading favorably, as well as promote gene expressions of inflammatory related cytokines (IL-1, IL-6, MCP-1, and TNF-α) and growth factors (TGF-β, FGF, PDGF, VEGF, IGF, and EGF). BCP showed a facilitating function on the gene expressions earlier than β-TCP. Further coculture experiments performed in vitro demonstrated that the CMs containing various increased cytokines for macrophages pre-culture could significantly promote MSCs osteogenic differentiation, which was confirmed by the gene expressions of osteogenic specific markers and the intracellular OCN product accumulation under the stimulation of BCP and β-TCP ceramics. Further evidence was found from the formation of mineralized nodules in BCM and TCM. In addition, this study showed a concise relationship between Ca-P ceramic induced inflammation and its osteoinductivity that the increased cytokines and growth factors from macrophages could promote MSCs osteogenic differentiation.

A bioceramic scaffold composed of strontium-doped three-dimensional hydroxyapatite whiskers for enhanced bone regeneration in osteoporotic defects

Reconstruction of osteoporotic bone defects is a clinical problem that continues to inspire the design of new materials. Methods: In this work, bioceramics composed of strontium (Sr)-doped hydroxyapatite (HA) whiskers or pure HA whiskers were successfully fabricated by hydrothermal treatment and respectively named SrWCP and WCP. Both bioceramics had similar three-dimensional (3D) porous structures and mechanical strengths, but the SrWCP bioceramic was capable of releasing Sr under physiological conditions. In an osteoporotic rat metaphyseal femoral bone defect model, both bioceramic scaffolds were implanted, and another group that received WCP plus strontium ranelate drug administration (Sr-Ran+WCP) was studied for comparison. Results: At week 1 post-implantation, osteogenesis coupled blood vessels were found to be more common in the SrWCP and Sr-Ran+WCP groups, with substantial vascular-like structures. After 12 weeks of implantation, comparable to the Sr-Ran+WCP group, the SrWCP group showed induction of more new bone formation within the defect as well as at the implant-bone gap region than that of the WCP group. Both the SrWCP and Sr-Ran+WCP groups yielded a beneficial effect on the surrounding trabecular bone microstructure to resist osteoporosis-induced progressive bone loss. While an abnormally high blood Sr ion concentration was found in the Sr-Ran+WCP group, SrWCP showed little adverse effect. Conclusion: Our results collectively suggest that the SrWCP bioceramic can be a safe bone substitute for the treatment of osteoporotic bone defects, as it promotes local bone regeneration and implant osseointegration to a level that strontium ranelate can achieve.

Surface sulfonation and nitrification enhance the biological activity and osteogenesis of polyetheretherketone by forming an irregular nano-porous monolayer

Polyether-ether-ketone (PEEK) is becoming a popular component of clinical spinal and orthopedic applications, but its practical use suffers from several limitations. In this study, irregular nano-porous monolayer with differently functional groups was formed on the surface of PEEK through sulfonation and nitrification. The surface characteristics were detected by field-emission scanning electron microscopy, atomic force microscopy, energy-dispersive X-ray spectrometry, water contact angle measurements and Fourier transform infrared spectroscopy. In vitro cellular behaviors were evaluated by cell adhesion, morphological changes, proliferation, alkalinity, phosphatase activity, real-time RT-PCR and western blot analyses. In vivo osseointegration was examined through micro-CT and histological assessments. Our results reveal that the irregular nano-porous of PEEK affect the biological properties. High-temperature hydrothermal NP treatment induced early osteogenic differentiation and early osteogenesis. Modification by sulfonation and nitrification can broaden the use of PEEK in orthopedic and dental applications. This study provides a theoretical basis for the wider clinical application of PEEK. a To obtain a uniform porous structure, PEEK samples were treated by concentrated sulfuric acid and fuming nitric acid (82-80%) with magnetic stirring sequentially. b Effects of nanopores on biological behavior of bMSCS.

Advances in dual functional antimicrobial and osteoinductive biomaterials for orthopaedic applications

A vast growing problem in orthopaedic medicine is the increase of clinical cases with antibiotic resistant pathogenic microbes, which is predicted to cause higher mortality than all cancers combined by 2050. Bone infectious diseases limit the healing ability of tissues and increase the risk of future injuries due to pathologic tissue remodelling. The traditional treatment for bone infections has several drawbacks and limitations, such as lengthy antibiotic treatment, extensive surgical interventions, and removal of orthopaedic implants and/or prosthesis, all of these resulting in long-term rehabilitation. This is a huge burden to the public health system resulting in increased healthcare costs. Current technologies e.g. co-delivery systems, where antibacterial and osteoinductive agents are delivered encounter challenges such as site-specific delivery, sustained and prolonged release, and biocompatibility. In this review, these aspects are highlighted to promote the invention of the next generation biomaterials to prevent and/or treat bone infections and promote tissue regeneration.

Comparative evaluation of the physicochemical properties of nano-hydroxyapatite/collagen and natural bone ceramic/collagen scaffolds and their osteogenesis-promoting effect on MC3T3-E1 cells

The use of various types of calcium phosphate has been reported in the preparation of repairing materials for bone defects. However, the physicochemical and biological properties among them might be vastly different. In this study, we prepared two types of calcium phosphates, nano-hydroxyapatite (nHA) and natural bone ceramic (NBC), into 3D scaffolds by mixing with type I collagen (CoL), resulting in the nHA/CoL and NBC/CoL scaffolds. We then evaluated and compared the physicochemical and biological properties of these two calcium phosphates and their composite scaffold with CoL. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD) and compressive tests were used to, respectively, characterize the morphology, composition, distribution and the effect of nHA and NBC to collagen. Next, we examined the biological properties of the scaffolds using cytotoxicity testing, flow cytometry, immunofluorescence staining, biocompatibility testing, CCK-8 assays and RT-PCR. The results reflected that the Ca2+ released from nHA and NBC could bind chemically with collagen and affect its physicochemical properties, including the infrared absorption spectrum and compression modulus, among others. Furthermore, the two kinds of scaffolds could promote the expression of osteo-relative genes, but showed different gene induction properties. In short, NBC/CoL could promote the expression of early osteogenic genes, while nHA/CoL could upregulate late osteogenic genes. Conclusively, these two composite scaffolds could provide MC3T3-E1 cells with a biomimetic surface for adhesion, proliferation and the formation of mineralized extracellular matrices. Moreover, nHA/CoL and NBC/CoL had different effects on the period and extent of MC3T3-E1 cell mineralization.

Harnessing the Properties of Biomaterial to Enhance the Immunomodulation of Mesenchymal Stem Cells

Mesenchymal stem cells (MSCs) have great therapeutic potential for tissue engineering and regenerative medicine due to their multipotency and paracrine functions. However, shortly after in vivo implantation, MSCs tend to migrate to the lungs and undergo apoptosis, which impairs their clinical efficacy. In addition, the ex vivo two-dimensional expansion of MSCs results in changes in their immunophenotype and functional activities compared to those in vivo. The use of biomaterials to culture and deliver MSCs has the potential to overcome these limitations. MSC-biomaterial constructs retain MSCs in situ and prolong their survival, while the MSCs ameliorate the foreign body reaction and fibrosis caused by the biomaterial. Biomaterial scaffolds can both preserve the tissue architecture and provide a three-dimensional biomimetic milieu for embedded MSCs, which enhance their paracrine functions, including their immunomodulatory potential. The dimensionality, physical characteristics, topographical cues, biochemistry, and microstructure can enhance the immunomodulatory potential of MSCs. Here, we review the link between the properties of biomaterial and the immunomodulatory potential of MSCs. Impact Statement Regeneration of cells, tissues, and whole organs is challenging. Mesenchymal stem cells (MSCs) have therapeutic potential in tissue engineering and regenerative medicine due to their paracrine functions, including immunomodulatory activity. The dimensionality, physical characteristics, topographical cues, biochemistry, and microstructure of biomaterial can be harnessed to enhance the immunomodulatory potential of MSCs for tissue engineering, which will increase their clinical efficacy, particularly for immune-related diseases.

Commercially available bone graft substitutes: the impact of origin and processing on graft functionality

Development of effective and cost-efficient bone tissue engineering grafts has been the key area of research for regenerative medicine, yet an ideal grafting material has remained elusive due in large part to the highly dynamic nature of bone. A wide array of materials, both natural and synthetic, have been implemented as potential candidates for commercially available products, yet the gold standard for grafting material still remains autogenous bone. We review currently commercially available bone graft materials and relevant graft characteristics that impact the effectiveness of tissue repair, emphasizing the advantages and disadvantages of materials based on composition and origin. Examined materials were selected through a web-based search for readily accessible and clinically applicable graft materials. Grafts were then categorized according to material source to examine advantages and disadvantages associated with allogenic, xenogeneic, synthetic materials. Lastly, the application of bioactive molecules onto these basal grafts is explored to illustrate the enhancement and regulative capacity of these additives on traditional osteobiologic materials.

Viscoelasticity in natural tissues and engineered scaffolds for tissue reconstruction

Viscoelasticity of living tissues plays a critical role in tissue homeostasis and regeneration, and its implication in disease development and progression is being recognized recently. In this review, we first explored the state of knowledge regarding the potential application of tissue viscoelasticity in disease diagnosis. In order to better characterize viscoelasticity with local resolution and non-invasiveness, emerging characterization methods have been developed with the potential to be supplemented to existing facilities. To understand cellular responses to matrix viscoelastic behaviors in vitro, hydrogels made of natural polymers have been developed and the relationships between their molecular structure and viscoelastic behaviors, are elucidated. Moreover, how cells perceive the viscoelastic microenvironment and cellular responses including cell attachment, spreading, proliferation, differentiation and matrix production, have been discussed. Finally, some future perspective on an integrated mechanobiological comprehension of the viscoelastic behaviors involved in tissue homeostasis, cellular responses and biomaterial design are highlighted. STATEMENT OF SIGNIFICANCE: Tissue- or organ-scale viscoelastic behavior is critical for homeostasis, and the molecular basis and cellular responses of viscoelastic materials at micro- or nano-scale are being recognized recently. We summarized the potential applications of viscoelasticity in disease diagnosis enabled by emerging non-invasive characterization technologies, and discussed the underlying mechanism of viscoelasticity of hydrogels and current understandings of cell regulatory functions of them. With a growing understanding of the molecular basis of hydrogel viscoelasticity and recognition of its regulatory functions on cell behaviors, it is important to bring the clinical insights on how these characterization technologies and engineered materials may contribute to disease diagnosis and treatment. This review explains the basics in characterizing viscoelasticity with our hope to bridge the gap between basic research and clinical applications.

The role of antimiR-26a-5p/biphasic calcium phosphate in repairing rat femoral defects

Although miRNAs have been implicated in the osteogenic differentiation of stem cells, their role in bone repair and reconstruction in tissue‑engineered bone grafts remains unclear. We previously reported that microRNA (miR)‑26a‑5p inhibited the osteogenic differentiation of adipose‑derived mesenchymal stem cells (ADSCs), and that antimiR‑26a‑5p exerted the opposite effect. In the present study, the role of miR‑26a‑5p‑ and antimiR‑26a‑5p‑modified ADSCs combined with biphasic calcium phosphate (BCP) scaffolds was evaluated in a rat femur defect model. The aim of the present study was to improve the understanding of the role of miR‑26a‑5p in bone regeneration in vivo, as well as to provide a new method to optimize the osteogenic ability of BCPs. ADSCs were infected with Lv‑miR‑26a‑5p, Lv‑miR‑NC, Lv‑antimiR‑26a‑5p or Lv‑antimiR‑NC respectively, and then combined with BCP scaffolds to repair rat femoral defects. Using X‑rays, micro‑computed tomography and histology at 2, 4, and 8 weeks postoperatively, the quantity and rate of bone regeneration were analyzed, revealing that they were the highest in animals treated with antimiR‑26a‑5p and the lowest in the miR‑26a‑5p treatment group. The expression levels of osteocalcin, collagen I, Runt‑related transcription factor 2, Wnt family member 5A and calmodulin‑dependent protein kinase II proteins were positively correlated with the bone formation rate. Taken together, the present results demonstrated that miR‑26a‑5p inhibited bone formation while antimiR‑26a‑5p accelerated bone formation via the Wnt/Ca2+ signaling pathway. Therefore, antimiR‑26a‑5p‑modified ADSCs combined with BCP scaffolds may be used to construct an effective tissue‑engineering bone graft for bone repair and reconstruction.

Hierarchically Porous Hydroxyapatite Hybrid Scaffold Incorporated with Reduced Graphene Oxide for Rapid Bone Ingrowth and Repair

Hydroxyapatite (HA), the traditional bone tissue replacement material was widely used in the clinical treatment of bone defects because of its excellent biocompatibility. However, the processing difficulty and poor osteoinductive ability greatly limit the application of HA. Although many strategies have been reported to improve the machinability and osteointegration ability, the performance including mechanical strength, porosity, cell adhesion, etc. of material still can not meet the requirements. In this work, a soft template method was developed and a porous scaffold with hierarchical pore structure, nano surface morphology, suitable porosity and pore size, and good biomechanical strength was successfully prepared. The hierarchical pore structure is beneficial for cell adhesion, fluid transfer, and cell ingrowth. Moreover, the loaded reduced graphene oxide (rGO) can improve the adhesion and promote the proliferation and spontaneous osteogenic differentiation bone marrow mesenchymal stem cells. The scaffold is then crushed, degraded and wrapped by the newly formed bone and the newly formed bone gradually replaces the scaffold. The degradation rate of the scaffold well matches the rate of the new bone formation. The hierarchical porous HA/rGO composite scaffolds can greatly accelerate the bone ingrowth in the scaffold and bone repair in critical bone defects, thus providing a clinical potential candidate for large segment bone tissue engineering.

Application of hydroxyapatite nanoparticles in tumor-associated bone segmental defect

Hydroxyapatite (HA) has been widely applied in bone repair because of its superior biocompatibility. Recently, a proliferation-suppressive effect of HA nanoparticles (n-HA) against various cancer cells was reported. This study was aimed at assessing the translational value of n-HA both as a bone-regenerating material and as an antitumor agent. Inhibition of tumor growth, prevention of metastasis, and enhancement of the survival rate of tumor-bearing rabbits treated with n-HA were demonstrated. Activated mitochondrial-dependent apoptosis in vivo was confirmed, and we observed that a stimulated immune response was involved in the n-HA-induced antitumor effect. A porous titanium scaffold loaded with n-HA was fabricated and implanted into a critical-sized segmental bone defect in a rabbit tumor model. The n-HA-releasing scaffold not only showed a prominent effect in suppressing tumor growth and osteolytic lesion but also promoted bone regeneration. These findings provide a rationale for using n-HA in tumor-associated bone segmental defects.

Osteoinductivity of Porous Biphasic Calcium Phosphate Ceramic Spheres with Nanocrystalline and Their Efficacy in Guiding Bone Regeneration

Conventional biphasic calcium phosphate (BCP) bioceramics are facing many challenges to meet the demands of regenerative medicine, and their biological properties are limited to a large extent due to the large grain size in comparison with nanocrystalline of natural bone mineral. Herein, this study aimed to fabricate porous BCP ceramic spheres with nanocrystalline (BCP-N) by combining alginate gelatinizing with microwave hybrid sintering methods and investigated their in vitro and in vivo combinational osteogenesis potential. For comparison, spherical BCP granules with microcrystalline (BCP-G) and commercially irregular BCP granules (BAM, BCP-I) were selected as control. The obtained BCP-N with specific nanotopography could well initiate and regulate in vitro biological response, such as degradation, protein adsorption, bone-like apatite formation, cell behaviors, and osteogenic differentiation. In vivo canine intramuscular implantation and rabbit mandible critical-sized bone defect repair further confirmed that nanotopography in BCP-N might be responsible for the stronger osteoinductivity and bone regenerative ability than BCP-G and BCP-I. Collectedly, due to nanotopographic similarities with nature bone apatite, BCP-N has excellent efficacy in guiding bone regeneration and holds great potential to become a potential alternative to standard bone grafts in bone defect filling applications.

Healing of osteoporotic bone defects by micro-/nano-structured calcium phosphate bioceramics

The micro-/nano-structured calcium phosphate bioceramic exhibited a higher new bone substitution rate in an osteoporotic bone defect rat model.

A Comparative Study on the Direct and Pulsed Current Electrodeposition of Cobalt-Substituted Hydroxyapatite for Magnetic Resonance Imaging Application

Hydroxyapatite has excellent biocompatibility and osteo-conductivity and, as the main inorganic component of human bones and teeth, is commonly used for bone repair. Its original characteristics can be changed by metal ion substitution. Cobalt ions can act as hypoxia-inducible factors and accelerate bone repair. At the same time, cobalt has paramagnetic properties and is often used in the study of medical imaging and target drugs. Through the introduction of cobalt ions, the unique hydroxyapatite has better biological activity and positioning of medical images. Herein, cobalt-substituted hydroxyapatite (CoHA) was synthesized on the surface of a titanium plate by electrochemical deposition and changes in the power output mode to explore the impact on CoHA. Electrochemical deposition with a pulse current significantly improved the productivity and uniformity of CoHA on the surface of titanium. CoHA show paramagnetic characteristics by a superconducting quantum interference device (SQUID). Resulting smaller particle size and circular morphology improves the magnetic strength of CoHA. Magnetic resonance imaging (MRI) of CoHA showed significant image contrast effect at low concentrations. The calculated particle relaxation rate was higher than other common MRI contrast agents. Biocompatibility of CoHA powder was evaluated using the human osteosarcoma cell line (MG63) which confirmed that CoHA is not cytotoxic and can promote cell growth and extracellular matrix mineralization. With the release of cobalt ions, CoHA was found to be significantly good in repression E. coli indicating about than 95% reduction in bacterial growth. The as-synthesized CoHA has a low degree of crystallinity, highly sensitive image contrast effect, and good bioactivity, and may have potential applications in bone repair and MRI.

Bioactive gel self-assembled from phosphorylate biomimetic peptide: A potential scaffold for enhanced osteogenesis

Bone morphogenetic protein-2 biomimetic peptide (BMPBP) is a potent osteoinductive cytokine and plays a critical role during bone regeneration. Efforts to prepare hydrogels with surface modification or physical absorption of bioactive molecules do not provide sufficient bioactivity to meet the requirements of clinical application. The goal of this study was to form a three-dimensional hydrogel comprised of BMP-2 core sequence oligopeptide, phosphoserine, a synthetic cell adhesion peptide (RGDS), and polyaspartic acid to synergistically promote osteogenesis. Experiments performed in vitro revealed that the peptide gel was conducive to adhesion and proliferation of rat marrow mesenchymal stem cells (rMSCs). In addition, RT-PCR analysis indicated that rMSCs allowed better expression of osteogenesis-related genes such as BMP-2, runt-related transcription factor 2 (RUNX2), alkaline phosphatase (ALP), osteocalcin (OCN), and osteopontin (OPN). Use of the rat cranial bone defects model with micro-CT 3D reconstruction showed that bone regeneration patterns occurred from one side edge toward the center of the area implanted with the prepared biomimetic peptide hydrogels, demonstrating significantly accelerated bone regeneration. This work will provide a basis to explore the further application potential of this bioactive scaffold.

Advanced smart biomaterials and constructs for hard tissue engineering and regeneration

Hard tissue repair and regeneration cost hundreds of billions of dollars annually worldwide, and the need has substantially increased as the population has aged. Hard tissues include bone and tooth structures that contain calcium phosphate minerals. Smart biomaterial-based tissue engineering and regenerative medicine methods have the exciting potential to meet this urgent need. Smart biomaterials and constructs refer to biomaterials and constructs that possess instructive/inductive or triggering/stimulating effects on cells and tissues by engineering the material's responsiveness to internal or external stimuli or have intelligently tailored properties and functions that can promote tissue repair and regeneration. The smart material-based approaches include smart scaffolds and stem cell constructs for bone tissue engineering; smart drug delivery systems to enhance bone regeneration; smart dental resins that respond to pH to protect tooth structures; smart pH-sensitive dental materials to selectively inhibit acid-producing bacteria; smart polymers to modulate biofilm species away from a pathogenic composition and shift towards a healthy composition; and smart materials to suppress biofilms and avoid drug resistance. These smart biomaterials can not only deliver and guide stem cells to improve tissue regeneration and deliver drugs and bioactive agents with spatially and temporarily controlled releases but can also modulate/suppress biofilms and combat infections in wound sites. The new generation of smart biomaterials provides exciting potential and is a promising opportunity to substantially enhance hard tissue engineering and regenerative medicine efficacy.

3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy

Toward the aim of personalized treatment, three-dimensional (3D) printing technology has been widely used in bone tissue engineering owing to its advantage of a fast, precise, and controllable fabrication process. Conventional bioceramic scaffolds are mainly used for bone tissue engineering; however, there has been a significant change in the application of bioceramic scaffolds during the past several years. Therefore, this review focuses on 3D-printed bioceramic scaffolds with different compositions and hierarchical structures (macro, micro, and nano scales), and their effects on the mechanical, degradation, permeability, and biological properties. Further, this review highlights 3D-printed bioceramic scaffolds for applications extending from bone tissue regeneration to bone tumor therapy. This review emphasizes recent developments in functional 3D-printed bioceramic scaffolds with the ability to be used for both tumor therapy and bone tissue regeneration. Considering the challenges in bone tumor therapy, these functional bioceramic scaffolds have a great potential in repairing bone defects induced by surgery and kill the possibly residual tumor cells to achieve bone tumor therapy. Finally, a brief perspective regarding future directions in this field was also provided. The review not only gives a summary of the research developments in bioceramic science but also offers a new therapy strategy by extending multifunctions of traditional biomaterials toward a specific disease.

STATEMENT OF SIGNIFICANCE

This review outlines the development tendency of 3D-printed bioceramic scaffolds for applications ranging from bone tissue regeneration to bone tumor therapy. Conventional bioceramic scaffolds are mainly used for bone tissue engineering; however, there has been a significant change in the application of bioceramic scaffolds during the past several years. Therefore, this review focuses on 3D-printed bioceramic scaffolds with different compositions and hierarchical structures (macro, micro, and nano scales), and their effects on the mechanical, degradation, permeability, and biological properties. Further, this review highlights 3D-printed bioceramic scaffolds for applications extending from bone tissue regeneration to bone tumor therapy. This review emphasizes recent developments in the functional 3D-printed bioceramic scaffolds with the ability to be used for both bone tumor therapy and bone tissue regeneration.

Improving Hydrophilicity and Inducing Bone-Like Apatite Formation on PPBES by Polydopamine Coating for Biomedical Application

Copoly(phthalazinone biphenyl ether sulfone) (PPBES) as a commercially available polyarylether is a promising orthopaedic implant material because its mechanical properties are similar to bone. However, the bioinert surface of polyarylether causes some clinical problems after implantation, which limits its application as an implant material. In this study, the surface of PPBES was modified by a biomineralization method of polydopamine-assisted hydroxyapatite formation (pHAF) to enhance its cytocompatibility. Polydopamine (PDA) coating, inspired by the adhesion mechanism of mussels, can readily endow PPBES with high hydrophilicity and the ability to integrate via the bone-like apatite coating. PPBES and PDA-coated PPBES were evaluated by scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle measurement. The water contact angles were reduced significantly after coating with PDA. PDA was successfully synthesized on PPBES and more PDA was obtained by increasing the temperature. Bone-like apatite on PPBES (apatite-coated PPBES) was confirmed by SEM and transmission electron microscopy (TEM). The cytotoxicity of pristine PPBES and apatite-coated PPBES were characterized by culturing of NIH-3T3 cells. Bone-like apatite synthesized by pHAF could further enhance cytocompatibility in vitro. This study provides a promising alternative for biofunctionalized PPBES with improved cytocompatibility for bone implant application.

Setd7 and its contribution to Boron-induced bone regeneration in Boron-mesoporous bioactive glass scaffolds

Boron (B), a trace element found in the human body, plays an important role for health of bone by promoting the proliferation and differentiation of osteoblasts. Our research group previously fabricated B-mesoporous bioactive glass (MBG) scaffolds, which successfully promoted osteogenic differentiation of osteoblasts when compared to pure MBG scaffolds without boron. However, the mechanisms of the positive effect of B-MBG scaffolds on osteogenesis remain unknown. Therefore, we performed in-vivo experiments in OVX rat models with pure MBG scaffolds and compared them to B-MBG scaffold. As a result, we found that B-MBG scaffold induced more new bone regeneration compared to pure MBG scaffold and examined genes related to bone regeneration induced by B-MBG scaffold through RNA-seq to obtain target genes and epigenetic mechanisms. The results demonstrated an increased expression and affiliation of Setd7 in the B-MBG group when compared to the MBG group. Immunofluorescent staining from our in vivo samples further demonstrated a higher localization of Setd7 and H3K4me3 in Runx2-positive cells in defects treated with B-MBG scaffolds. KEGG results suggested that specifically Wnt/β-catenin signaling pathway was highly activated in new bone area associated with B-MBG scaffolds. Thereafter, in vitro studies with human bone marrow stem cells (hBMSCs) stimulated by extracted liquid of B-MBG scaffolds was associated with significantly elevated levels of Setd7, as well as H3K4me3 when compared to MBG scaffolds alone. To verify the role of Setd7 in new bone formation in the presence of Boron, Setd7 was knocked down in hBMSCs with stimulation of the extracted liquids of B-MBG or MBG scaffolds. The result showed that osteoblast differentiation of hBMSCs was inhibited when Setd7 was knocked down, which could not be rescued by the extracted liquids of B-MBG scaffolds confirming its role in osteoblast differentiation and bone regeneration. As a histone methylase, Setd7 may be expected to be a potential epigenetic target for new treatment schemes of osteoporosis.

STATEMENT OF SIGNIFICANCE

Boron-containing MBG scaffold has already been proved to promote bone regeneration in femoral defects of OVX rats by our research group, however, the epigenetic mechanism of Boron's positive effects on bone generation remains ill-informed. In our present study, we found an increased expression and affiliation of Setd7 and H3K4me3 in Runx2-positive osteoblasts in vivo. And in vitro, the higher expression of Setd7 enhanced osteogenic differentiation of human BMSCs stimulated by extracted liquids of B-MBG scaffold compared to MBG scaffold, which was associated with the activation of Wnt/β-catenin signaling pathway. Above all, it suggests that Setd7 plays an positive role in osteogenic differentiation and it may become a potential epigenetic target for new schemes for osteoporosis.

Application of osteoinductive calcium phosphate ceramics in children's endoscopic neurosurgery: report of five cases

This work aimed at investigating the possibility and effectiveness of osteoinductive calcium phosphate (CaP) ceramics to close the drilled skull holes and prevent the postoperative cerebrospinal fluid (CSF) leaking in children’s endoscopic neurosurgery. Five children patients (four boys and one girl, 3- to 8-years old) underwent the surgery, in which the endoscopic third ventriculostomy (ETV) was operated in four cases of hydrocephalus, and biopsy and ETV were both performed in one case of pineal tumor. The drilled skull holes were filled with the commercial osteoinductive CaP ceramics. The patients were followed up by CT scan at 1, 7 days, 3 and 6 months postoperatively. All the five cases were successful, and the holes were closed well after filled with the ceramics. The follow-up survey showed that no CSF leaking or rejection reaction was found. The CT scan indicated that the drilled holes began healing at 7 days postoperatively, and a relatively complete healing happened at 6 months postoperatively. The excellent ability of the CaP ceramics to induce bone regeneration was also confirmed by repairing the skull defects in a monkey model. The results of μ-CT and histological analysis showed that a bony structure with irregular array occurred at the defect area, and the newly formed bone volume density reached 65.7%. In conclusion, the osteoinductive CaP ceramics could be an ideal material to treat the drilled skull holes in children’s endoscopic neurosurgery and prevent CSF leaking afterwards. However, further investigation with more cases and longer follow-up was required to evaluate the clinical effect.

In vitro and in vivo assessment of nanostructured porous biphasic calcium phosphate ceramics for promoting osteogenesis in an osteoporotic environment

Treatment of bone defects in osteoporotic patients with bone substitutes is difficult, due to insufficient osseointegration. The development of appropriate biomaterials to solve the problem requires the assessment of the material performance in an osteoporotic environment, which is rarely investigated. Herein, nanostructured biphasic calcium phosphate (nBCP) ceramics were prepared via the incorporation of hydroxyapatite nanoparticles (HANPs) into porous biphasic CaP (BCP) substrates, leading to an increase of over 500% in the specific surface area. Primary osteoblasts harvested from osteoporotic rats were cultured on the nBCP ceramics, and it was found that the osteoblast functions, including proliferation, alkaline phosphatase activity, osteocalcin secretion and expression of osteogenic genes, were significantly enhanced compared with osteoblasts grown on non-nanostructured BCP ceramics. To further assess the osteoinduction ability, the ceramics were implanted in the femur of osteoporotic rats. Compared to the rats implanted with non-nanostructured BCP ceramics, a higher amount of mechanically matured bone was newly formed in the rats with nBCP ceramics after 6 weeks of implantation. Such enhanced osteoinduction ability of the nBCP ceramics may be due to the incorporated HANPs, as well as the nanostructured topography induced by the HANPs. These results indicate good in vitro and in vivo osteoinductivity of the nBCP ceramics in an osteoporotic environment and offer potential benefits for treating bone defects in osteoporotic patients.

Potential application of an injectable hydrogel scaffold loaded with mesenchymal stem cells for treating traumatic brain injury

In this contribution, we developed an injectable hydrogel composed of sodium alginate and hyaluronic acid that acts as a tissue scaffold to create a more optimal microenvironment for the stem cells for potential application of traumatic brain injury implantation.

Enhanced osteoinductivity of porous biphasic calcium phosphate ceramic beads with high content of strontium-incorporated calcium-deficient hydroxyapatite

Further biomimicking natural bone and enhancing osteoinductivity to meet the requirements of regenerative medicine is the key development direction of biphasic calcium phosphate (BCP) ceramics.