Enhancement of bioelectricity generation by manipulation of the electron shuttles synthesis pathway in microbial fuel cells

Bio-Electron-Fenton (BEF) process driven by microbial fuel cells for triphenyltin chloride (TPTC) degradation

The intensive use of triphenyltin chloride (TPTC) has caused serious environmental pollution. In this study, an effective method for TPTC degradation was proposed based on the Bio-Electron-Fenton process in microbial fuel cells (MFCs). The maximum voltage of the MFC with graphite felt as electrode was 278.47% higher than that of carbon cloth. The electricity generated by MFC can be used for in situ generation of H₂O₂ to a maximum of 135.96μmolL^-1 at the Fe@Fe₂O_3(*)/graphite felt composite cathode, which further reacted with leached Fe²⁺ to produce hydroxyl radicals. While 100μmolL^-1 TPTC was added to the cathodic chamber, the degradation efficiency of TPTC reached 78.32±2.07%, with a rate of 0.775±0.021μmolL^-1h^-1. This Bio-Electron-Fenton driving TPTC degradation might involve in SnC bonds breaking and the main process is probably a stepwise dephenylation until the formation of inorganic tin and CO₂. This study provides an energy saving and efficient approach for TPTC degradation.

Enhanced power production from microbial fuel cells with high cell density culture

Improvement of power production in a microbial fuel cell (MFC) with a high cell density culture strategy was developed. By using high cell density culture, the voltage output and power density output of the MFC were enhanced about 0.6 and 1.6 times compared to the control, respectively. Further analysis showed that riboflavin concentration in the MFC was dramatically increased from 0.1 mg/L to 1.2 mg/L by high cell density culture. Moreover, the biofilm formation on the anode surface was significantly enhanced by this new strategy. The increased accumulation of electron shuttle (riboflavin) as well as enhanced biofilm formation contributed to the improvement in anodic electrochemical activity and these factors were the underlying mechanism for MFC performance improvement by high cell density culture. This work demonstrated that high cell density culture would be a simple and practical strategy for MFC manipulation.

Real-time monitoring of phenazines excretion in Pseudomonas aeruginosa microbial fuel cell anode using cavity microelectrodes

Phenazines are a kind of metabolites that can mediate extracellular Pseudomonas aeruginosa (P. aeruginosa) cells in microbial fuel cells (MFCs). However, it is still not clear that whether and how the excretion profile of phenazines is affected by the operating MFC. Here, we report a real time analysis approach based on a cavity microelectrode electrochemical sensor to investigate the phenazines excretion behavior of P. aeruginosa during MFC operation. The phenazine concentration increases at first 72 h, reaches a plateau and decreases after 120 h and also shows local dependent variation. It is dependent on the MFC current generation profile but also affect by the biofilm formation. Accordingly, a mechanism about phenazines excretion in MFC anode and the phenazines mediated extracellular electron transfer of the P. aeruginosa anode is proposed. This work provides a novel strategy for self-mediated extracellular electron transfer analysis in the operating MFCs.

Deciphering synergistic characteristics of microbial fuel cell-assisted dye decolorization

This study provided a novel evaluation scheme to quantitatively reveal "synergistic" stimulation of microbial fuel cell (MFC)-assisted dye decolorization for industrial practicability. This work also disclosed why dye decolorization was more electrochemically favorable during simultaneous bioelectricity generation and dye decolorization (SBG&DD). Quantitative assessment upon stimulating effects of different decolorized metabolites on BG and DD alone was also implemented for conclusive remarks. Apparently, using MFC as the method of dye decontamination could considerably increase ca. 40-70% of electron transfer capabilities for SBG&DD, thereby significantly improving the performance of dye decontamination.

Bioelectrogenic role of anoxic microbial anode in the treatment of chemical wastewater: microbial dynamics with bioelectro-characterization

A membrane-less anoxic bioelectrochemical treatment (AxBET) system was evaluated to study the influence of bioelectrogenic activity during the treatment of chemical wastewater (CW). Increment in power generation was observed with increase in substrate loading (61-204 mW/m(2)) indicating the ability of anodic bacteria in BET system to utilize the complex chemicals as the sole carbon source. Derivative analysis of voltammograms depicted by positive and negative peak potentials which relate to the extracellular electron transport sites (EETs) that presumably play a significant role in electron transfer. These self-driven redox mediators varied with respect to the substrate load. The microbial population was dominated by anaerobic microorganisms which are commonly involved in effluent treatment plants during the initial phase of operation. A gradual shift in the microbial community was observed towards enrichment of electrogenically active bacteria belonging to phyla viz., Firmicutes and Proteobacteria after prolonged operation. Shannon Index and principal component analysis correlated with the microbial profile studies. The feasibility of self-driven bioremediation of chemical wastewater in an AxBET system demonstrated bioelectricity production along with multipollutant removal simultaneously.

Enhanced bioelectricity generation by improving pyocyanin production and membrane permeability through sophorolipid addition in Pseudomonas aeruginosa-inoculated microbial fuel cells

Improvement on electron shuttle-mediated extracellular electron transfer (EET) is of great potential to enhance the power output of MFCs. In this study, sophorolipid was added to enhance the performance of Pseudomonas aeruginosa-inoculated MFC by improving the electron shuttle-mediated EET. Upon sophorolipid addition, the current density and power density increased ∼ 1.7 times and ∼ 2.6 times, respectively. In accordance, significant enhancement on pyocyanin production (the electron shuttle) and membrane permeability were observed. Furthermore, the conditions for sophorolipid addition were optimized to achieve maximum pyocyanin production (14.47 ± 0.23 μg/mL), and 4 times higher power output was obtained compared to the control. The results substantiated that enhanced membrane permeability and pyocyanin production by sophorolipid, which promoted the electron shuttle-mediated EET, underlies the improvement of the energy output in the P. aeruginosa-inoculated MFC. It suggested that addition of biosurfactant could be a promising way to enhance the energy generation in MFCs.

Towards energy neutral wastewater treatment: methodology and state of the art

Conventional biological wastewater treatment processes are energy-intensive endeavors that yield little or no recovered resources and often require significant external chemical inputs. However, with embedded energy in both organic carbon and nutrients (N, P), wastewater has the potential for substantial energy recovery from a low-value (or no-value) feedstock. A paradigm shift is thus now underway that is transforming our understanding of necessary energy inputs, and potential energy or resource outputs, from wastewater treatment, and energy neutral or even energy positive treatment is increasingly emphasized in practice. As two energy sources in domestic wastewater, we argue that the most suitable way to maximize energy recovery from wastewater treatment is to separate carbon and nutrient (particularly N) removal processes. Innovative anaerobic treatment technologies and bioelectrochemical processes are now being developed as high efficiency methods for energy recovery from waste COD. Recently, energy savings or even generation from N removal has become a hotspot of research and development activity, and nitritation-anammox, the newly developed CANDO process, and microalgae cultivation are considered promising techniques. In this paper, we critically review these five emerging low energy or energy positive bioprocesses for sustainable wastewater treatment, with a particular focus on energy optimization in management of nitrogenous oxygen demand. Taken together, these technologies are now charting a path towards to a new paradigm of resource and energy recovery from wastewater.