Three-Dimensional Electrodes for High-Performance Bioelectrochemical Systems

Bioelectrochemical systems (BES) are groups of bioelectrochemical technologies and platforms that could facilitate versatile environmental and biological applications. The performance of BES is mainly determined by the key process of electron transfer at the bacteria and electrode interface, which is known as extracellular electron transfer (EET). Thus, developing novel electrodes to encourage bacteria attachment and enhance EET efficiency is of great significance. Recently, three-dimensional (3D) electrodes, which provide large specific area for bacteria attachment and macroporous structures for substrate diffusion, have emerged as a promising electrode for high-performance BES. Herein, a comprehensive review of versatile methodology developed for 3D electrode fabrication is presented. This review article is organized based on the categorization of 3D electrode fabrication strategy and BES performance comparison. In particular, the advantages and shortcomings of these 3D electrodes are presented and their future development is discussed.

Wiring Bacterial Electron Flow for Sensitive Whole-Cell Amperometric Detection of Riboflavin

A whole-cell bioelectrochemical biosensing system for amperometric detection of riboflavin was developed. A "bioelectrochemical wire" (BW) consisting of riboflavin and cytochrome C between Shewanella oneidensis MR-1 and electrode was characterized. Typically, a strong electrochemical response was observed when riboflavin (VB2) was added to reinforce this BW. Impressively, the electrochemical response of riboflavin with this BW was over 200 times higher than that without bacteria. Uniquely, this electron rewiring process enabled the development of a biosensing system for amperometric detection of riboflavin. Remarkably, this amperometric method showed high sensitivity (LOD = 2.2 nM, S/N = 3), wide linear range (5 nM ∼ 10 μM, 3 orders of magnitude), good selectivity, and high resistance to interferences. Additionally, the developed amperometric method featured good stability and reusability. It was further applied for accurate and reliable determination of riboflavin in real conditions including food, pharmaceutical, and clinical samples without pretreatment. Both the cost-effectiveness and robustness make this whole-cell amperometric system ideal for practical applications. This work demonstrated the power of bioelectrochemical signal amplification with exoelectrogen and also provided a new idea for development of versatile whole-cell amperometric biosensors.

Trace heavy metal ions promoted extracellular electron transfer and power generation by Shewanella in microbial fuel cells

Although microbial fuel cells (MFCs) is considered as one of the most promising technology for renewable energy harvesting, low power output still accounts one of the bottlenecks and limits its further development. In this work, it is found that Cu(2+) (0.1μgL(-1)-0.1mgL(-1)) or Cd(2+) (0.1μgL(-1)-1mgL(-1)) significantly improve the electricity generation in MFCs. The maximum power output achieved with trace level of Cu(2+) (∼6nM) or Cd(2+) (∼5nM) is 1.3 times and 1.6 times higher than that of the control, respectively. Further analysis verifies that addition of Cu(2+) or Cd(2+) effectively improves riboflavin production and bacteria attachment on the electrode, which enhances bacterial extracellular electron transfer (EET) in MFCs. These results unveil the mechanism for power output enhancement by Cu(2+) or Cd(2+) addition, and suggest that metal ion addition should be a promising strategy to enhance EET as well as power generation of MFCs.

Enhanced power production from microbial fuel cells with high cell density culture

Improvement of power production in a microbial fuel cell (MFC) with a high cell density culture strategy was developed. By using high cell density culture, the voltage output and power density output of the MFC were enhanced about 0.6 and 1.6 times compared to the control, respectively. Further analysis showed that riboflavin concentration in the MFC was dramatically increased from 0.1 mg/L to 1.2 mg/L by high cell density culture. Moreover, the biofilm formation on the anode surface was significantly enhanced by this new strategy. The increased accumulation of electron shuttle (riboflavin) as well as enhanced biofilm formation contributed to the improvement in anodic electrochemical activity and these factors were the underlying mechanism for MFC performance improvement by high cell density culture. This work demonstrated that high cell density culture would be a simple and practical strategy for MFC manipulation.

Enhancement of power production with tartaric acid doped polyaniline nanowire network modified anode in microbial fuel cells

The feasibility to use tartaric acid doped PANI for MFC anode modification was determined. Uniform PANI nanowires doped with tartaric acid were synthesized and formed mesoporous networks on the carbon cloth surface. By using this tartaric acid doped PANI modified carbon cloth (PANI-TA) as the anode, the voltage output (435 ± 15 mV) and power output (490 ± 12 mW/m(2)) of MFC were enhanced by 1.6 times and 4.1 times compared to that of MFC with plain carbon cloth anode, respectively. Strikingly, the performance of PANI-TA MFC was superior to that of the MFCs with inorganic acids doped PNAI modified anode. These results substantiated that tartaric acid is a promising PANI dopant for MFC anode modification, and provided new opportunity for MFC performance improvement.

Microbial fuel cell-based biosensors for environmental monitoring: a review

The microbial fuel cell (MFC) is an innovative technology that was initially designed to harness energy from organic waste using microorganisms. It is striking how many promising applications beyond energy production have been explored in recent decades. In particular, MFC-based biosensors are considered to be the next generation biosensing technology for environmental monitoring. This review describes recent advances in this emerging technology of MFC-based biosensors, with a special emphasis on monitoring of biochemical oxygen demand and toxicity in the environment. The progress confirms that MFC-based biosensors could be used as self-powered portable biosensing devices with great potential in long-term and remote environmental monitoring.

Enhanced bioelectricity generation by improving pyocyanin production and membrane permeability through sophorolipid addition in Pseudomonas aeruginosa-inoculated microbial fuel cells

Improvement on electron shuttle-mediated extracellular electron transfer (EET) is of great potential to enhance the power output of MFCs. In this study, sophorolipid was added to enhance the performance of Pseudomonas aeruginosa-inoculated MFC by improving the electron shuttle-mediated EET. Upon sophorolipid addition, the current density and power density increased ∼ 1.7 times and ∼ 2.6 times, respectively. In accordance, significant enhancement on pyocyanin production (the electron shuttle) and membrane permeability were observed. Furthermore, the conditions for sophorolipid addition were optimized to achieve maximum pyocyanin production (14.47 ± 0.23 μg/mL), and 4 times higher power output was obtained compared to the control. The results substantiated that enhanced membrane permeability and pyocyanin production by sophorolipid, which promoted the electron shuttle-mediated EET, underlies the improvement of the energy output in the P. aeruginosa-inoculated MFC. It suggested that addition of biosurfactant could be a promising way to enhance the energy generation in MFCs.

Adsorption and removal of triphenylmethane dyes from water by magnetic reduced graphene oxide

Triphenylmethane (TPM) dye is one of the most prevalent and recalcitrant water contaminants. Magnetic reduced graphene oxide (rGO) is an efficient adsorbent for organic pollutants removal. However, the performance and adsorption kinetics of magnetic rGO towards TPM have not yet been studied. In this study, a magnetic Fe3O4@rGO nano-composite, which could be easily removed from water with a simple magnetic separation step was synthesized and characterized. The magnetic rGO showed fast adsorption rate and high adsorption capacity towards different TPM dyes (the Langmuir monolayer adsorption capacity is 64.93 mg/g for adsorption of crystal violet). The adsorption processes are well-fitted to the pseudo-second-order kinetic model (R(2) > 0.99) and the Langmuir isotherm model (R(2) = 0.9996). Moreover, the magnetic rGO also showed excellent recycling and regeneration capabilities. The results indicated that adsorption with magnetic rGO would be a promising strategy to clean up the TPM contamination.