A novel modified carbon paste electrode based on NiO/CNTs nanocomposite and (9, 10-dihydro-9, 10-ethanoanthracene-11, 12-dicarboximido)-4-ethylbenzene-1, 2-diol as a mediator for simultaneous determination of cysteamine, nicotinamide adenine dinucleotide and folic acid

Peanut skin extract mediated synthesis of gold nanoparticles, silver nanoparticles and gold-silver bionanocomposites for electrochemical Sudan IV sensing

Sustainable methods are needed for rapid and efficient detection of environmental and food pollutants. The Sudan group of dyes has been used extensively as adulterants in food and also are found to be polluting the soil and water bodies. There have been several methods for detection of Sudan dyes, but most of them are not practical enough for common use. In this study, the electrochemical detection efficiency and stability of gold nanoparticle (AuNPs), silver NPs and Au-Ag bionanocomposites, synthesised by peanut skin extract, modified glassy carbon electrode has been investigated. The synthesised nanomaterial samples were characterised, for their quality and quantity, using ultra-visible spectroscopy, inductive coupled plasma mass spectrophotometer, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscope and field emission scanning electron microscope. The nanomaterial hybrid electrodes showed great efficiency and stability in the detection of Sudan IV compared with the other previous electrodes. The peak current of the Sudan IV oxidation and reduction was found to be proportional to its concentration, in the range of 10-80 µM, with a detection limit of 4 µM. The hybrid electrodes showed 90% stability in detection for 20 cycles.

Fabrication of a Food Nano-Platform Sensor for Determination of Vanillin in Food Samples

Herein, we describe the fabrication of NiO decorated single wall carbon nanotubes (NiO-SWCNTs) nanocomposites using the precipitation method. The synthesized NiO-SWCNTs nanocomposites were characterized by X-ray diffraction (XRD) and Transmission electron microscopy (TEM). Remarkably, NiO-SWCNTs and 1-butylpyridinium hexafluorophosphate modified carbon paste electrode (CPE/NiO-SWCNTs/BPrPF6) were employed for the electrochemical detection of vanillin. The vanillin sensor showed an ultra-high sensitivity of 0.3594 μA/μM and a low detection limit of 0.007 μM. In the final step, the NiO-SWCNTs/BPrPF6 was used as the suitable tool for food analysis.

Simultaneous electrochemical determination of levodopa and piroxicam using a glassy carbon electrode modified with a ZnO-Pd/CNT nanocomposite

A highly conductive electrochemical sensor was constructed for the simultaneous electrochemical determination of levodopa and piroxicam by modification of a glassy carbon electrode with a ZnO-Pd/CNT nanocomposite (GCE/ZnO-Pd/CNTs). The ZnO-Pd/CNT nanocomposite was synthesized by the sol-gel procedure and was characterized by EDAX, MAP and SEM. The sensor was shown to improve the oxidation signal of levodopa and piroxicam by ∼70.2-fold and ∼41.5-fold, respectively. This marks the first time that the electrochemical behavior of levodopa and piroxicam have been investigated at the surface of GCE/ZnO-Pd/CNTs. The voltammogram showed a quasi-reversible signal and an irreversible redox signal for electro-oxidation of levodopa and piroxicam, respectively. The GCE/ZnO-Pd/CNTs showed a linear dynamic range of 0.6 to 100.0 μM (at a potential of ∼180 mV) and 0.1 to 90 μM (at a potential of ∼480 mV) with detection limits of 0.08 and 0.04 μM for the determination of levodopa and piroxicam, respectively. GCE/ZnO-Pd/CNTs were then applied for the determination of levodopa and piroxicam in real samples.

Gold nanoparticles and reduced graphene oxide-amplified label-free DNA biosensor for dasatinib detection

Dasatinib or sprycel is an anticancer drug for treatment of chronic myelogenous leukemia, prostate cancer, and some of the other cancers with several adverse effects.

An amplified platform nanostructure sensor for the analysis of epirubicin in the presence of topotecan as two important chemotherapy drugs for breast cancer therapy

Epirubicin (EB) and topotecan (TP) are two major anticancer drugs that are used in breast cancer therapy with many side effects.

Ultrasonic assisted synthesis of nanocomposite materials based on resole resin and surface modified nano CeO2: Chemical and morphological aspects

In this study, phenol-formaldehyde (PF)/CeO₂ nanocomposites (NC)s were prepared by in-situ polymerization of phenol and formaldehyde in alkali solution in the presence of surface modified CeO₂ nanoparticles (NP)s by sonochemical assisted synthesis. The morphology and structure of PF/CeO₂ NCs were characterized by using fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and thermal analyses methods. It was found that due to the good dispersion of surface modified NPs in polymer matrix and the strong interfacial interaction between the CeO₂ NPs and PF matrix, the thermal stability and thermo-mechanical properties of the PF/CeO₂ NCs were greatly enhanced. FE-SEM and AFM analyses showed the uniform distribution of CeO₂ NPs in PF matrix. The XRD patterns of NCs show the presence of crystalline CeO₂ NPs in amorphous matrix. The thermal analysis results reveal that, with increases in the content of CeO₂ NPs in PF matrix, the thermally stability factors of samples were drastically enhanced.

Ultrasensitive and selective 4-aminophenol chemical sensor development based on nickel oxide nanoparticles decorated carbon nanotube nanocomposites for green environment

Nickel oxide nanoparticles decorated carbon nanotube nanocomposites (NiO·CNT NCs) were prepared in a basic medium by using facile wet-chemical routes. The optical, morphological, and structural properties of NiO·CNT NCs were characterized using Fourier transformed infra-red (FT-IR), Ultra-violet visible (UV/Vis) spectroscopy, field-emission scanning electron microscopy (FESEM), X-ray energy dispersed spectroscopy (XEDS), X-ray photoelectron spectroscopy (XPS), and powder X-ray diffraction (XRD) methods. Selective 4-aminophenol (4-AP) chemical sensor was developed by a flat glassy carbon electrode (GCE, surface area: 0.0316cm²) fabricated with a thin-layer of NCs. Electrochemical responses including higher sensitivity, large dynamic range (LDR), limit of detection (LOD), and long-term stability towards 4-AP were obtained using the fabricated chemical sensors. The calibration curve was found linear (R²=0.914) over a wide range of 4-AP concentration (0.1nmol/L-0.1mol/L). In perspective of slope (2×10^-5μA/μM), LOD and sensitivity were calculated as 15.0±0.1pM and ~6.33×10^-4μA/(μM·cm) respectively. The synthesized NiO·CNT NCs using a wet-chemical method is a significant route for the development of ultrasensitive and selective phenolic sensor based on nano-materials for environmental toxic substances. It is suggested that a pioneer and selective development of 4-AP sensitive sensor using NiO·CNT NCs by a facile and reliable current vs voltage (I-V) method for the major application of toxic agents in biological, green environmental, and health-care fields in near future.

Application of novel Ni(II) complex and ZrO2 nanoparticle as mediators for electrocatalytic determination of N-acetylcysteine in drug samples

The electrooxidation of N-acetylcysteine (N-AC) was studied by a novel Ni(II) complex modified ZrO₂ nanoparticle carbon paste electrode [Ni(II)/ZrO₂/NPs/CPE] using voltammetric methods. The results showed that Ni(II)/ZrO₂/NPs/CPE had high electrocatalytic activity for the electrooxidation of N-AC in aqueous buffer solution (pH = 7.0). The electrocatalytic oxidation peak currents increase linearly with N-AC concentrations over the concentration ranges of 0.05-600μM using square wave voltammetric methods. The detection limit for N-AC was equal to 0.009μM. The catalytic reaction rate constant, k_h, was calculated (7.01 × 10² M^-1 s^-1) using the chronoamperometry method. Finally, Ni(II)/ZrO₂/NPs/CPE was also examined as an ultrasensitive electrochemical sensor for the determination of N-AC in real samples such as tablet and urine.

Selective staining of CdS on ZnO biolabel for ultrasensitive sandwich-type amperometric immunoassay of human heart-type fatty-acid-binding protein and immunoglobulin G

We report on an ultrasensitive metal-labeled amperometric immunoassay of proteins, which is based on the selective staining of nanocrystalline cadmium sulfide (CdS) on ZnO nanocrystals and in-situ microliter-droplet anodic stripping voltammetry (ASV) detection on the immunoelectrode. Briefly, antibody 1 (Ab₁), bovine serum albumin (BSA), antigen and ZnO-multiwalled carbon nanotubes (MWCNTs) labeled antibody 2 (Ab₂-ZnO-MWCNTs) were successively anchored on a β-cyclodextrin-graphene sheets (CD-GS) nanocomposite modified glassy carbon electrode (GCE), forming a sandwich-type immunoelectrode (Ab₂-ZnO-MWCNTs/antigen/BSA/Ab₁/CD-GS/GCE). CdS was selectively grown on the catalytic ZnO surfaces through chemical reaction of Cd(NO₃)₂ and thioacetamide (ZnO-label/CdS-staining), due to the presence of an activated cadmium hydroxide complex on ZnO surfaces that can decompose thioacetamide. A beforehand cathodic "potential control" in air and then injection of 7μL of 0.1M aqueous HNO₃ on the immunoelectrode allow dissolution of the stained CdS and simultaneous cathodic preconcentration of atomic Cd onto the electrode surface, thus the following in-situ ASV detection can be used for immunoassay with enhanced sensitivity. Under optimized conditions, human immunoglobulin G (IgG) and human heart-type fatty-acid-binding protein (FABP) are analyzed by this method with ultrahigh sensitivity, excellent selectivity and small reagent-consumption, and the limits of detection (LODs, S/N=3) are 0.4fgmL^-1 for IgG and 0.3fgmL^-1 for FABP (equivalent to 73 FABP molecules in the 6μL sample employed).

Green synthesis of silver nanoparticles using onion extract and their application for the preparation of a modified electrode for determination of ascorbic acid

A high-quality method for one-pot biosynthesis of silver nanoparticles (AgNPs) using onion extracts as reductant and stabilizer is reported. The synthesized AgNPs were characterized by ultraviolet-visible spectroscopy (UV-Vis), X-ray powder diffraction (XRD), and transmission electron microscopy (TEM). UV-Vis spectroscopy results showed that the AgNP absorption band was located at a peak of 397 nm in aqueous solution. Both XRD and TEM results confirmed that the AgNPs were mainly spherical with average diameters of 6.0 nm by TEM and about 5.3-10.2 nm calculated using XRD data. The ability of AgNPs to reduce charge transfer resistance was also investigated using electrochemical impedance spectroscopy. Finally, the effect of synthesized NPs on ascorbic acid signal was investigated by square wave voltammetry. The peak current of square wave voltammograms of ascorbic acid increased linearly with its concentration in the range of 0.4-450.0μM. The detection limit for ascorbic acid was 0.1μM.

Electrochemical sandwich-type biosensors for α-1 antitrypsin with carbon nanotubes and alkaline phosphatase labeled antibody-silver nanoparticles

A novel sandwich-type biosensor was developed for the electrochemical detection of α-1 antitrypsin (AAT, a recognized biomarker for Alzheimer's disease). The biosensor was composed of 3, 4, 9, 10-perylene tetracarboxylic acid/carbon nanotubes (PTCA-CNTs) as a sensing platform and alkaline phosphatase-labeled AAT antibody functionalized silver nanoparticles (ALP-AAT Ab-Ag NPs) as a signal enhancer. CNTs offer high surface area and good electrical conductivity. Importantly, Ag NPs could increase the amount of ALP on the sensing surface and the ALP could dephosphorylate 4-amino phenyl phosphate (APP) enzymatically to produce electroactive species 4-aminophenol (AP). For detecting AAT based on the sandwich-type biosensor, the results show that the peak current value of AP using ALP-AAT Ab-Ag NPs as signal enhancer is much higher than that by using ALP-AAT Ab bioconjugate (without Ag NPs), the biosensor exhibited desirable performance for AAT determination with a wide linearity in the range from 0.05 to 20.0pM and a low detection limit of 0.01pM. Finally, the developed sensor was successfully applied to the analysis of AAT concentration in serum samples.

Time-dependent effects of [apyr]BF(4) and key contributors to their mixture stimulation on Vibrio qinghaiensis sp.-Q67 at apical and biochemical levels

Earlier reports studied the time-dependent effects of imidazolium-based ionic liquids ([amim]X) in the aspect of biochemical explanation and that of key contributor in mixture effects. Presently, the effects of N-alkylpyridinium-based ILs ([apyr]BF4) were studied combining the above two aspects, i.e., the time-dependent effects of [bpyr]BF4, [hpyr]BF4 and [opyr]BF4 on luminescence and biochemical indicators in Vibrio qinghaiensis sp.-Q67, and those of the mixtures. In individual results, the inhibition on luminescence increased over concentrations and the side chain length, showing concentration- and side chain-dependence. Moreover, the inhibition of [apyr]BF4 decreased from 0.25 to 24h, showing a time-dependence. Notably, [hpyr]BF4 stimulated the luminescence at 24h. The biochemical effects, including inhibition and stimulation, were well correlated to those on luminescence. In mixture results, the inhibition on luminescence was lower than the predicted effects by concentration addition model which was based on individual results. Moreover, the mixture stimulation on luminescence was significantly higher than individual ones, and the mixture stimulation on biochemical indicators was even greater than that on luminescence. In mixture effects, [bpyr]BF4 was the positive contributor, and [hpyr]BF4 was the negative contributor. Similarities and differences between [amim]X and [apyr]BF4 indicated underlying mechanisms of the commonly observed hormetic effects of ionic liquids.