Ultrasensitive detection of ochratoxin A using aptasensors

Therapeutic applications of AS1411 aptamer, an update review

Nucleolin or C23, is one of the most abundant non-ribosomal phosphoproteins of nucleolus. However, in several cancers, nucleolin is highly expressed both intracellularly and on the cell surface. So, it is considered as a potential target for the diagnosis and cancer therapy. Targeting nucleolin by compounds such as AS1411 aptamer can reduce tumor cell growth. In this regard, interest has increased in nucleolin as a molecular target for overcoming cancer therapy challenges. This review paper addressed recent progresses in nucleolin targeting by the G-rich AS1411 aptamer in the field of cancer therapy mainly over the past three years.

Persistent luminescence nanorod based luminescence resonance energy transfer aptasensor for autofluorescence-free detection of mycotoxin

Serious ochratoxin A (OTA) contamination necessitates the development of rapid, sensitive and selective analytical methods for its determination in food safety. Herein, we report a persistent luminescence resonance energy transfer (LRET) based aptasensor for the autofluorescence-free detection of OTA. OTA aptamer functionalized persistent luminescence nanorod (PLNR) Zn₂GeO₄:Mn²⁺ and the aptamer complementary DNA modified gold nanoparticle (AuNP) were used as the donor and the acceptor, respectively. The developed LRET aptasensor integrated the advantages of the long-lasting persistent luminescence of PLNR, the high selectivity of aptamer and the low probe background of LRET sensors, allowing autofluorescence-free detection of OTA in biological samples with high sensitivity and selectivity. The developed LRET aptasensor gave an excellent linearity in the range of 0.01-10 ng mL^-1, the detection limit of 3 pg mL^-1 and the precision of 2.7% (RSD, n = 11) at 1 ng mL^-1 level. The applicability of the developed aptasensor was demonstrated by analyzing beer samples for OTA with the recoveries of 92.3%-104%.

Recent Advances in Ochratoxin A Electrochemical Biosensors: Recognition Elements, Sensitization Technologies, and Their Applications

Ochratoxin A (OTA) is a class of mycotoxin that are mainly produced by Aspergillus and Penicillium and widely found in plant origin food. OTA-contaminated foods can cause serious harm to animals and humans, while high stability of OTA makes it difficult to remove in conventional food processing. Thus, sensitive and rapid detection of OTA undoubtedly plays an important role in OTA prevention and control. In this paper, the conventional and novel methods of OTA at home and abroad are summarized and compared. The latest research progress and related applications of novel OTA electrochemical biosensors are mainly described with a new perspective. We innovatively divided the recognition element into single and combined recognition elements. Specifically, signal amplification technologies applied to the OTA electrochemical aptasensor are proposed. Furthermore, summary of the current limitations and future challenges in OTA analysis is included, which provide reference for the further research and applications.

Change of Amino Acid Residues in Idiotypic Nanobodies Enhanced the Sensitivity of Competitive Enzyme Immunoassay for Mycotoxin Ochratoxin A in Cereals

Anti-idiotypic nanobodies, usually expressed by gene engineering protocol, has been shown as a nontoxic coating antigen for toxic compound immunoassays. We here focused on how to increase immunoassay sensitivity by changing the nanobody’s primary sequence. In the experiments, two anti-idiotype nanobodies against monoclonal antibody 1H2, which is specific to ochratoxin A, were obtained and named as nontoxic coating antigen 1 (NCA1) and nontoxic coating antigen 2 (NCA2). Three differences between the nanobodies were discovered. First, there are six amino acid residues (AAR) of changes in the complementarity determining region (CDR), which compose the antigen-binding site. One of them locates in CDR1 (I–L), two of them in CDR2 (G–D, E–K), and three of them in CDR3 (Y–H, Y–W). Second, the affinity constant of NCA1 was tested as 1.20 × 10⁸ L mol⁻¹, which is about 4 times lower than that of NCA2 (5.36 × 10⁸ L mol⁻¹). Third, the sensitivity (50% inhibition concentration) of NCA1 for OTA was shown as 0.052 ng mL⁻¹, which was 3.5 times lower than that of nontoxic coating antigen 2 (0.015 ng mL⁻¹). The results indicate that the AAR changes in CDR of the anti-idiotypic nanobodies, from nonpolar to polar, increasing the affinity constant may enhance the immunoassay sensitivity. In addition, by using the nontoxic coating antigen 2 to substitute the routine synthetic toxic antigen, we established an eco-friendly and green enzyme-linked immunosorbent assay (ELISA) method for rapid detection of ochratoxin A in cereals. The half-maximal inhibitory concentration (IC₅₀) of optimized ELISA was 0.017 ng mL⁻¹ with a limit of detection (LOD) of 0.003 ng mL⁻¹. The optimized immunoassay showed that the average recoveries of spiked corn, rice, and wheat were between 80% and 114.8%, with the relative standard deviation (RSD) ranging from 3.1–12.3%. Therefore, we provided not only basic knowledge on how to improve the structure of anti-idiotype nanobody for increasing assay sensitivity, but also an available eco-friendly ELISA for ochratoxin A in cereals.

Terminal-conjugated non-aggregated constraints of gold nanoparticles on lateral flow strips for mobile phone readouts of enrofloxacin

Antibiotics abuse now poses a global threat to public health. Monitoring their residual levels as well as metabolites are of great importance, still challenges remain in in situ tracing during the circulation. Herein, taking the typical antibacterial Enrofloxacin (ENR) as a subject, a paper-based aptasensor was tailored by manipulating a duo of aptameric moieties to "sandwich" the target in a lateral-flow regime. To visualize the tight-binding sandwich motif more vividly, an irregular yet robust DNA-bridged gold nanoparticles (AuNPs) proximity strategy was developed with recourse to terminal deoxynucleotidyl transferase, of which the nonaggregate constraining feature was unveiled via optical absorption and scanning probe topography. This complex performed exceptionally better in the test strip context than single-particle tags, leading to an enhanced on-chip focusing. Rather than qualitative color developing, further efforts were taken to visualize the readouts in a quantitative manner by exploiting the smartphone camera for pattern recognition along with data processing in a professional App. Overall, this prototyped contraption realized a rapid and ultrasensitive quantification of ENR down to 0.1 μg/L along with a broad linear range over 5 orders of magnitude, plus excellent selectivity and precision even for real samples. Such innovative fusion across DNA-structured nanomanufacturing and intelligent perception provides a prospective and invigorating solution to point-of-care inspection.

Colorimetric aptasensor for ochratoxin A detection based on enzyme-induced gold nanoparticle aggregation

An innovative colorimetric method based on enzyme-induced gold nanoparticle aggregation was developed to detect the activity of alkaline phosphatase (ALP), and it was further applied to construct an aptasensor to monitor ochratoxin A (OTA) concentrations. In the presence of ALP, the substrate ascorbic acid 2-phosphate was hydrolyzed to generate ascorbic acid (AA). Subsequently, reduction of MnO₂ nanosheets by AA produced manganese ions, which mediated gold nanoparticle aggregation. The color of the detection solution changed from brown-red to purple to blue as the ALP concentration increased, and a detection limit of 0.05 U·L^-1 was achieved. Furthermore, this strategy was successfully utilized to devise a target-responsive aptasensor for colorimetric detection of an important mycotoxin, OTA, which causes food poisoning and has various toxic effects on humans. The proposed method offers high sensitivity with a detection limit as low as 5.0 nM together with high specificity. When applied to analyze red wine and grape juice samples, no complex sample pretreatment or bulky instruments were required. Overall, a colorimetric platform based on enzyme-induced gold nanoparticle aggregation was successfully established to improve the simplicity and sensitivity of ALP and OTA detection. This platform appears highly promising for mycotoxin-related food safety monitoring.

A low-cost paper-based aptasensor for simultaneous trace-level monitoring of mercury (II) and silver (I) ions

Mercury (Hg²⁺) and silver (Ag⁺) ions possess the harmful effects on public health and environment that makes it essential to develop the sensing techniques with great sensitivity for the ions. Metal ions commonly coexist in the different biological and environmental systems. Hence, it is an urgent demand to design a simple method for the simultaneous detection of metal ions, peculiarly in the case of coexisting Hg²⁺ and Ag⁺. This study introduces a low-cost paper-based aptasensor to monitor Hg²⁺ and Ag⁺, simultaneously. The strategy of the sensing array is according to the conformational changes of Hg²⁺- and Ag⁺-specific aptamers and their release from the GO surface after the injection of the target sample on the sensing platform. Through monitoring the fluorescence recovery changes against the concentrations of the ions, Hg²⁺ and Ag⁺ can be determined as low as 1.33 and 1.01 pM. The paper-based aptasensor can simultaneously detect the ions within about 10 min. The aptasensor is applied prosperously to monitor Hg²⁺ and Ag⁺ in human serum, water, and milk. The designed aptasensor with the main advantages of simplicity and feasibility holds the supreme potential to develop a cost-effective sensing method for environmental monitoring, food control, and human diagnostics.

Core-satellite assemblies and exonuclease assisted double amplification strategy for ultrasensitive SERS detection of biotoxin

In this work, core-satellite assemblies and exonuclease assisted double amplification strategy is developed to produce surface-enhanced Raman scattering (SERS) biosensor towards ultrasensitive detection of biotoxin. In the presence of target molecules, the exonuclease III (Exo III) assisted efficient recycling amplification provides an excellent pathway for the fabrication of core-satellite SERS sensor. Briefly, the proposed strategy includes the following double amplifications: (i) Exo III induced target-related signal amplification; (ii) core-satellite assemblies assisted formation of SERS "hot-spots" induced signal amplification. To show the applicability of the suggested strategy, the detection of ochratoxin A (OTA), one of the most toxic and widely distributed biotoxin, is demonstrated as an example. The results show that the limit of detection (LOD) of OTA is 0.83 fg mL^-1 (S/N = 3). On the basis of the DNA aptamer induced specific target recognition, hence our sensing strategy is easy to be expended to the ultrasensitive detection of other targets, e.g., DNAs, RNAs, and other molecules that have corresponding DNA aptamers.

Human Biomonitoring of Mycotoxins in Blood, Plasma and Serum in Recent Years: A Review

This manuscript reviews the state-of-the-art regarding human biological monitoring (HBM) of mycotoxins in plasma serum and blood samples. After a comprehensive and systematic literature review, with a focus on the last five years, several aspects were analyzed and summarized: a) the biomarkers analyzed and their encountered levels, b) the analytical methodologies developed and c) the relationship between biomarker levels and some illnesses. In the literature reviewed, aflatoxin B1-lysine (AFB1-lys) and ochratoxin A (OTA) in plasma and serum were the most widely studied mycotoxin biomarkers for HBM. Regarding analytical methodologies, a clear increase in the development of methods for the simultaneous determination of multiple mycotoxins has been observed. For this purpose, the use of liquid chromatography (LC) methodologies, especially when coupled with tandem mass spectrometry (MS/MS) or high resolution mass spectrometry (HRMS), has grown. A high percentage of the samples analyzed for OTA or aflatoxin B1 (mostly as AFB1-lys) in the reviewed papers were positive, demonstrating human exposure to mycotoxins. This review confirms the importance of mycotoxin human biomonitoring and highlights the important challenges that should be faced, such as the inclusion of other mycotoxins in HBM programs, the need to increase knowledge of mycotoxin metabolism and toxicokinetics, and the need for reference materials and new methodologies for treating samples. In addition, guidelines are required for analytical method validation, as well as equations to establish the relationship between human fluid levels and mycotoxin intake.

Luminescent detection of Ochratoxin A using terbium chelated mesoporous silica nanoparticles

This work represents the time-resolved fluorescence detection of Ochratoxin A (OTA), a highly toxic and commonly found toxin in food stuffs, by a terbium (Tb³⁺) chelated nanoparticle sensor with high sensitivity and remarkable selectivity. The coordination of OTA to Tb³⁺ center on nanoparticle surface resulted in the significant enhancement of the fluorescence signal in nanomolar concentrations with a detection limit of 20 ppb. In contrast, no enhancements were observed in the presence of other common mycotoxins such as Aflatoxin B1, Zearalenone, Citrinin and Patulin. The results indicate that the Tb³⁺ chelated nanoparticle sensor has great potential for applications in food analysis and safety.

Ultrasensitive and regenerable nanopore sensing based on target induced aptamer dissociation

For ionic current rectification (ICR) based sensing, nanopore functionalizations are mostly designed for directly binding target molecules to generate detectable signals from surface charge variation. However, this strategy is highly dependent on the charge difference between the captured molecules and surface functionalization layers, which will increase the nanopore design difficulty and subsequently limit the nanopore applicability. Another key challenge for ICR based sensing is the nanopore regenerability that is critical if online monitoring or repeated determination needs to be performed with one sensor. Though some types of nanopore regeneration have been realized on some specific targets or with harsh conditions, it is still highly favored to develop a regenerability using mild conditions for various targets. To address these two challenges, we developed a novel and universal sensing strategy for aptamer-functionalized nanopore that can be easily regenerated after each usage without any harsh conditions and independent of target molecule charge or size for ICR based nanopore sensing. Ochratoxin A (OTA) was used as a model analyte and its corresponding aptamer partially hybridized with the pre-immobilized complementary DNA (cDNA) onto the nanopore inner surface. We demonstrated that the recognition and conjugation of OTA with its aptamer resulted in rectified ionic current variations due to the dissociation between the OTA aptamer and its partially paired cDNA. The performance of this nanopore sensor including sensitivity, selectivity, regenerability, and applicability was characterized using rectified ionic current. This nanopore sensing strategy will provide a promising platform for extensive targets and online sensing applications.

Ratiometric electrochemical aptasensor for ultrasensitive detection of Ochratoxin A based on a dual signal amplification strategy: Engineering the binding of methylene blue to DNA

A novel ratiometric electrochemical aptasensor was developed for Ochratoxin A (OTA) detection based on the binding of methylene blue (MB) to DNA with a dual signal amplification strategy. The formation of dsDNA structures between ferrocene-labeled complementary DNA (Fc-cDNA), the OTA aptamer, and complementary helper DNA (hDNA) caused Fc away from the electrode, and allowed dsDNA to bind with a certain amount of MB. Here, a small oxidation current of Fc (I_Fc) and a large oxidation current of MB (I_MB) were obtained. In the presence of OTA, its specific recognition with the aptamer induced the release of aptamer and hDNA from the electrode and subsequently the formation of hairpin structure for cDNA, which caused Fc close to the electrode and a weaker binding ability with MB. Then, an increased I_Fc and a decreased I_MB were obtained. Based on this principle, OTA could be accurately quantified by measuring the ratiometric signal of I_Fc/I_MB. Herein, the dual signal amplification strategy of the introduction of hDNA and the binding with MB after the OTA recognition was exploited to amplify the response signal. The obtained aptasensor showed a linear detection range from 10 pg mL^-1 to 10 ng mL^-1 and a detection limit of 3.3 pg mL^-1. The aptasensor was successfully applied to determine OTA in wheat, and the results were validated through HPLC-MS. Furthermore, by changing the target aptamers, this strategy could be universally used for the determination of various mycotoxins, showing promising potential applications for mycotoxins monitoring in agricultural products and foods.

Nanotetrahedron-assisted electrochemical aptasensor with cooperatively-folding aptamer chimera for sensitive and selective detection of lysozyme in red wines

Although aptamers show great potential in the field of analytical chemistry, their intrinsic shortcomings of relatively weak affinity and selectivity in complex working environment limit their applicability to real analysis, because the flexibility of aptamers makes the specific aptatopes (i.e., binding sites for targets) in the conformational structure unstable and deficient. Herein, an anti-lysozyme aptamer and lysozyme were chosen as models. An aptamer chimera which could cooperatively fold to provide stable aptatopes for lysozyme was designed for improvement of the anti-lysozyme aptamers' recognition ability, and an electrochemical aptasensor was then developed based on the aptamer chimera, with assistance of a rigid DNA nanotetrahedron as a spacer to orientate the aptamer chimera on the electrodes. The nanotetrahedron-aptamer chimera-based aptasensor presented highly sensitive and selective detection towards lysozyme in red wines, furnishing a 42-fold lower LOD (17.9 pmol L^-1) and better selectivity than that of the aptasensor with the original aptamer. Moreover, the developed aptasensor was characterized by good recovery (91.3-109.0%), good accuracy, repeatability and stability, indicating the excellent practical applicability of the cooperatively-folding aptamer chimera in real world. This proof-of-concept study can be referred for any other aptamers, analytes, and samples.

Ultrasensitive electrochemical detection of ochratoxin A based on signal amplification by one-pot synthesized flower-like PEDOT-AuNFs supported on a graphene oxide sponge

To enhance the sensitivity of an aptasensor, a novel strategy was designed to develop an electrochemical aptasensor based on poly(3,4-ethylenedioxy thiophene)-gold nanoflower (PEDOT-AuNF) composites supported on a three-dimensional graphene oxide sponge (GOS). GOS with a three-dimensional sponge-like porous structure, exhibiting excellent electrical conductivity and a large surface area, provided the first amplification of the electrochemical signal for ochratoxin A (OTA) detection. PEDOT-AuNFs, synthesized by an ionic liquid-assisted one-pot method, presented a peculiar hierarchical flower-like structure, a high electroactive surface area, and more binding sites for immobilizing the aptamer molecules by the Au-S bonds. When PEDOT-AuNFs were supported on the surface of GOS by the interaction of the π-π packing between PEDOT and graphene oxide, a synergistic effect was produced to provide the second amplification for the aptasensor. PEDOT-AuNFs/GOS provided an ultrasensitive detection technique by multiple signal amplification for the electrochemical sensing of OTA. Consequently, this strategy not only endowed the aptasensor with high sensitivity but also needed no complicated signal amplification. The electrochemical sensor was fabricated successfully on a glassy carbon electrode to detect OTA with a linear response in the range of 0.01-20 ng L^-1 and a limit of detection of 4.9 pg L^-1. Moreover, it displayed good specificity, reproducibility and stability. The utilization of the proposed aptasensor for the quantitative determination of OTA in wine indicates that it can find promising applications in detecting OTA and even other mycotoxins in foodstuffs.

Advances in biosensors for the detection of ochratoxin A: Bio-receptors, nanomaterials, and their applications

Ochratoxin A (OTA) is a class of mycotoxin mainly produced by the genera Aspergillus and Penicillium. OTA can cause various forms of kidney, liver and brain diseases in both humans and animals although trace amount of OTA is normally present in food. Therefore, development of fast and sensitive detection technique is essential for accurate diagnosis of OTA. Currently, the most commonly used detection methods are enzyme-linked immune sorbent assays (ELISA) and chromatographic techniques. These techniques are sensitive but time consuming, and require expensive equipment, highly trained operators, as well as extensive preparation steps. These drawbacks limit their wide application in OTA detection. On the contrary, biosensors hold a great potential for OTA detection at for both research and industry because they are less expensive, rapid, sensitive, specific, simple and portable. This paper aims to provide an extensive overview on biosensors for OTA detection by highlighting the main biosensing recognition elements for OTA, the most commonly used nanomaterials for fabricating the sensing interface, and their applications in different read-out types of biosensors. Current challenges and future perspectives are discussed as well.

A nanozyme-based cascade colorimetric aptasensor for amplified detection of ochratoxin A

Colorimetric assays have been widely developed for the detection of toxin ochratoxin A (OTA), but most of them suffer from moderate sensitivity when they are adopted for the detection of trace OTA in a complicated food matrix. For the purpose of overcoming this issue, an innovative cascade reaction-based colorimetric aptasensor was developed for the achievement of high sensitivity. The biotin-labelled OTA aptamer was immobilized onto streptavidin magnetic beads by means of the biotin-streptavidin reaction. With OTA binding to its aptamer, the structural switching of the aptamer results in the release of the alkaline phosphatase-labelled oligonucleotide, which is partially complementary to the aptamer. Following the magnetic separation, the cascade reaction is initiated through the enzymatic conversion of ascorbic acid-2-phosphate into ascorbic acid. Subsequent to that, the generated ascorbic acid reduces MnO2 nanosheets to Mn2+ ions, accordingly destroying the oxidase-mimicking activity of MnO2 nanosheets. In consequence, it is not possible to oxidize 3,3',5,5'-tetramethylbenzidine (TMB), a substrate for oxidase, with Mn2+ for the production of the blue colour product (TMB Ox). With the increasing amount of OTA, a colour change occurs from blue to colourless. The cascade reaction has the potential of greatly amplifying the detection signal, together with remarkably improving the sensitivity, making this colorimetric sensor a universal and promising platform for the highly sensitive detection of mycotoxins in the field of public food safety monitoring.

Aptamer-Based Fluorometric Ochratoxin A Assay Based on Photoinduced Electron Transfer

This study describes a novel quencher-free fluorescent method for ochratoxin A (OTA) detection based on the photoinduced electron transfer (PIET) between guanine and fluorophore. In the absence of OTA, carboxyfluorescein (FAM)-labeled aptamer can partly hybridize with the complementary strand of OTA aptamer (OTA-cAPT), which contains four guanines at its 3′-end. As a result, the fluorescence of FAM is quenched due to PIET and stacked guanines. In the presence of OTA, FAM-labeled OTA aptamer can bind specifically to OTA, and thereby the high fluorescence intensity of the dye can be maintained. Under the optimal conditions, the method had a detection limit of 1.3 nM. In addition, the method we proposed is highly sensitive and specific for OTA. Furthermore, the method was proven to be reliable based on its successful application in the detection of OTA in red wine samples. Therefore, this promising, facile, and quencher-free method may be applied to detect other toxins by using other appropriate aptamers.

Signal-on electrochemiluminescence aptasensor for bisphenol A based on hybridization chain reaction and electrically heated electrode

A simple and sensitive electrochemiluminescence (ECL) aptasensor has been developed for bisphenol A (BPA) detection. The capture DNA (CDNA) was modified on the heated indium-tin-oxide (ITO) working electrode surface firstly and then hybridized with BPA aptamer to form double strand DNA (dsDNA). The presence of target can cause the releasing of aptamer from the electrode surface since the aptamer prefers to switch its configuration to combine with BPA. Subsequently, the free CDNA will induce hybridization chain reaction (HCR) to produce long dsDNA on the electrode surface. Ru(phen)₃²⁺ can integrate into the grooves of dsDNA to act as an ECL reagent, thus enhanced ECL signal can be detected. The temperature control during the processes of target recognition and HCR were realized through the heated electrode instead of the bulk solution heating. Furthermore, the performance of the ECL aptasensor can be further enhanced at elevated electrode temperature. Under the optimized conditions, the ECL intensity of the system has a linear relationship with the logarithm of BPA concentration in the range of 2.0 pM-50 nM. The limit of detection (LOD) at 55 °C (electrode surface temperature) was calculated to be 1.5 pM, which was approximately 6.5-fold lower than that at 25 °C. The proposed biosensor has been applied to detect the BPA in drink samples with satisfactory results.

A simple and sensitive electrochemiluminescence aptasensor for determination of ochratoxin A based on a nicking endonuclease-powered DNA walking machine

Ochratoxin A (OTA) poses a serious threat to the health of human beings and animals. In this paper, a simple and sensitive electrochemiluminescence (ECL) aptasensor was constructed to detect OTA based on electrochemiluminescence resonance energy transfer (ECL-RET) and a nicking endonuclease-powered DNA walking machine. Originally, the signal of cadmium sulfide semiconductor quantum dots (CdS QDs) was quenched efficiently by Cy5. After the addition of OTA, the walker autonomously hybridized with Cy5-labeled DNA and released plenty of Cy5-DNA from the electrode surface with the help of a nicking endonuclease. As a result, the signal of CdS QDs recovered efficiently. As an artificial and popular signal amplification technique, the DNA walking machine greatly improved the sensitivity. Under optimal conditions, the aptasensor not only detected OTA in a linear range from 0.05 nM to 5 nM with a detection limit of 0.012 nM (S/N = 3), but also showed an excellent selectivity for OTA over other mycotoxins.

Sensitive colorimetric detection of ochratoxin A by a dual-functional Au/Fe3O4 nanohybrid-based aptasensor

A novel colorimetric aptasensor based on a Au/Fe₃O₄ nanohybrid was developed to detect ochratoxin A (OTA). The aptasensor is composed of a free OTA aptamer, a Au/Fe₃O₄ nanohybrid coated with biotinylated complementary DNA of the OTA aptamer (biotin-cDNA-Au/Fe₃O₄), and free alkaline-phosphatase-labeled streptavidin (SA-ALP). The Au/Fe₃O₄ nanohybrid not only immobilizes biotin-cDNA but also magnetically separates SA-ALP from the sample solution. One part of the OTA aptamer sequence hybridizes with biotin-cDNA immobilized on Au/Fe₃O₄, and the left part of the OTA aptamer sequence covers the biotin and blocks the specific interaction between biotin and SA-ALP. OTA can interrupt the interaction of OTA aptamer binding to biotin-cDNA-Au/Fe₃O₄ and can inhibit the shielding effect of the OTA aptamer on biotin. The amount of SA-ALP that can be captured by biotin-cDNA-Au/Fe₃O₄ thus increases with increasing OTA concentration. Through a simple magnetic separation, the collected SA-ALP-linked Au/Fe₃O₄ can produce a yellow-colored solution in the presence of p-nitrophenyl phosphate (p-NPP). This colorimetric aptasensor can detect OTA as low as 1.15 ng mL⁻¹ with high specificity.

A novel colorimetric aptasensor based on a Au/Fe₃O₄ nanohybrid was developed to detect ochratoxin A (OTA).

Morphology-Preferable MoSe2 Nanobrooms as a Sensing Platform for Highly Selective Apta-Capturing of Salmonella Bacteria

The present report employed nanobroom (NB)-shaped two-dimensional molybdenum diselenide (MoSe2) for the preparation of a sensing matrix for the detection of Salmonella paratyphi. An aptamer specific to salmonella was immobilized onto MoSe2NB-modified fluorine-doped tin oxide via glutaraldehyde cross-linking. Structural and morphological characterizations were performed using UV-vis spectroscopy, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray diffraction techniques. Characterizations confirmed the nanobroom morphology and nanosize of the MoSe2 material. Electrochemical studies revealed a good linear detection range of 10-2-10-10 CFU/mL with low detection limit of 1 × 10-10 CFU/mL and with R 2 = 0.98. The developed preferable nanobroom-shaped sensing matrix can provide a promising platform for rapid and accurate detection of Salmonella in real samples due to its tremendous stability and sensitivity.

Aptamers and Aptasensors for Highly Specific Recognition and Sensitive Detection of Marine Biotoxins: Recent Advances and Perspectives

Marine biotoxins distribute widely, have high toxicity, and can be easily accumulated in water or seafood, exposing a serious threat to consumer health. Achieving specific and sensitive detection is the most effective way to prevent emergent issues caused by marine biotoxins; however, the previous detection methods cannot meet the requirements because of ethical or technical drawbacks. Aptamers, a kind of novel recognition element with high affinity and specificity, can be used to fabricate various aptasensors (aptamer-based biosensors) for sensitive and rapid detection. In recent years, an increasing number of aptamers and aptasensors have greatly promoted the development of marine biotoxins detection. In this review, we summarized the recent aptamer-related advances for marine biotoxins detection and discussed their perspectives. Firstly, we summarized the sequences, selection methods, affinity, secondary structures, and the ion conditions of all aptamers to provide a database-like information; secondly, we summarized the reported aptasensors for marine biotoxins, including principles, detection sensitivity, linear detection range, etc.; thirdly, on the basis of the existing reports and our own research experience, we forecast the development prospects of aptamers and aptasensors for marine biotoxins detection. We hope this review not only provides a comprehensive summary of aptamer selection and aptasensor development for marine biotoxins, but also arouses a broad readership amongst academic researchers and industrial chemists.

Development of a new format of competitive immunochromatographic assay using secondary antibody-europium nanoparticle conjugates for ultrasensitive and quantitative determination of ochratoxin A

In this study, to enhance the sensitivity of conventional immunochromatographic assay (ICA) two strategies including using a high sensitive label and changing the assay format, were simultaneously applied to develop an ultrasensitive format of ICA. In new format, primary monoclonal antibody against ochratoxin A (OTA) was used without any labeling, and a secondary polycolonal antibody was labeled with europium fluorescent nanoparticles (EuNPs). Detection was performed in a single step by inserting the test strip into a microtube containing all reagents. The results were obtained within 12 min and read by a portable fluorescent strip reader. Salient features of the new format of ICA compared with conventional format include: (1) A 100-fold decrease in limit of detection (LOD) due to application of two amplification strategy; (2) Reduction in expensive monoclonal antibody consumption. The established method was evaluated for the quantitative determination of OTA with LOD as low as 0.4 pg mL^-1.

Aptasensors as the future of antibiotics test kits-a case study of the aptamer application in the chloramphenicol detection

Antibiotics are a type of antimicrobial drug with the ubiquitous presence in foodstuff that effectively applied to treat the diseases and promote the animal growth worldwide. Chloramphenicol as one of the antibiotics with the broad action spectrum against Gram-positive and Gram-negative bacteria is widely applied for the effective treatment of infectious diseases in humans and animals. Unfortunately, the serious side effects of chloramphenicol, such as aplastic anemia, kidney damage, nausea, and diarrhea restrict its application in foodstuff and biomedical fields. Development of the sufficiently sensitive methods to detect chloramphenicol residues in food and clinical diagnosis seems to be an essential demand. Biosensors have been introduced as the promising tools to overcome the requirement. As one of the newest types of the biosensors, aptamer-based biosensors (aptasensors) are the efficient sensing platforms for the chloramphenicol monitoring. In the present review, we summarize the recent achievements of the accessible aptasensors for qualitative detection and quantitative determination of chloramphenicol as a candidate of the antibiotics. The present chloramphenicol aptasensors can be classified in two main optical and electrochemical categories. Also, the other formats of the aptasensing assays like the high performance liquid chromatography (HPLC) and microchip electrophoresis (MCE) have been reviewed. The enormous interest in utilizing the diverse nanomaterials is also highlighted in the fabrication of the chloramphenicol aptasensors. Finally, some results are presented based on the advantages and disadvantages of the studied aptasensors to achieve a promising perspective for designing the novel antibiotics test kits.

Development of a Magnetic Nanoparticles-Based Screen-Printed Electrodes (MNPs-SPEs) Biosensor for the Quantification of Ochratoxin A in Cereal and Feed Samples

A rapid and sensitive electrochemical biosensor based on magnetic nanoparticles and screen-printed electrodes (MNPs-SPEs sensor) was developed for the detection of ochratoxin A (OTA) in cereal and feed samples. Different types of magnetic nanoparticles-based ELISA (MNPs-ELISA) were optimized, and the signal detection, as well as sensitivity, was enhanced by the combined use of screen-printed electrodes (SPEs). Under the optimized conditions, the calibration curve of the MNPs-SPEs sensor was y = 0.3372x + 0.8324 (R² = 0.9805). The linear range of detection and the detection limit were 0.01–0.82 ng/mL and 0.007 ng/mL, respectively. In addition, 50% inhibition (IC50) was detectable at 0.10 ng/mL. The limit of detection (LOD) of this MNPs-SPEs sensor in cereal and feed samples was 0.28 μg/kg. The recovery rates in spiked samples were between 78.7% and 113.5%, and the relative standard deviations (RSDs) were 3.6–9.8%, with the coefficient of variation lower than 15%. Parallel analysis of commercial samples (corn, wheat, and feedstuff) showed a good correlation between MNPs-SPEs sensor and liquid chromatography tandem mass spectrometry (LC/MS-MS). This new method provides a rapid, highly sensitive, and less time-consuming method to determine levels of ochratoxin A in cereal and feedstuff samples.

Novel haptens and monoclonal antibodies with subnanomolar affinity for a classical analytical target, ochratoxin A

Ochratoxin A is a potent toxic fungal metabolite whose undesirable presence in food commodities constitutes a problem of public health, so it is strictly regulated and controlled. For the first time, two derivatives of ochratoxin A (OTAb and OTAd) functionalized through positions other than the native carboxyl group of the mycotoxin, have been synthesized in order to better mimic, during the immunization process, the steric and conformational properties of the target analyte. Additionally, two conventional haptens making use of that native carboxyl group for protein coupling (OTAe and OTAf) were also prepared as controls for the purpose of comparison. The immunological performance in rabbits of protein conjugates based on OTAb and OTAd overcome that of conjugates employing OTAe and OTAf as haptens. After immunization of mice with OTAb and OTAd conjugates, a collection of high-affinity monoclonal antibodies to ochratoxin A was generated. In particular, one of those antibodies, the so-called OTAb#311, is very likely the best antibody produced so far in terms of selectivity and affinity to ochratoxin A.

A Label-Free Aptasensor for Ochratoxin a Detection Based on the Structure Switch of Aptamer

A label-free sensing platform is developed based on switching the structure of aptamer for highly sensitive and selective fluorescence detection of ochratoxin A (OTA). OTA induces the structure of aptamer, transforms into G-quadruplex and produces strong fluorescence in the presence of zinc(II)-protoporphyrin IX probe due to the specific bind to G-quadruplex. The simple method exhibits high sensitivity towards OTA with a detection limit of 0.03 nM and excellent selectivity over other mycotoxins. In addition, the successful detection of OTA in real samples represents a promising application in food safety.

Simultaneous detection and determination of mercury (II) and lead (II) ions through the achievement of novel functional nucleic acid-based biosensors

The serious threats of mercury (Hg²⁺) and lead (Pb²⁺) ions for the public health makes it important to achieve the detection methods of the ions with high affinity and specificity. Metal ions usually coexist in some environment and foodstuff or clinical samples. Therefore, it is very necessary to develop a fast and simple method for simultaneous monitoring the amount of metal ions, especially when Hg²⁺ and Pb²⁺ coexist. DNAzyme-based biosensors and aptasensors have been highly regarded for this purpose as two main groups of the functional nucleic acid (FNA)-based biosensors. In this review, we summarize the recent achievements of functional nucleic acid-based biosensors for the simultaneous detection of Hg²⁺ and Pb²⁺ ions in two main optical and electrochemical groups. The tremendous interest in utilizing the various nanomaterials is also highlighted in the fabrication of the FNA-based biosensors. Finally, some results are presented based on the advantages and disadvantages of the studied FNA-based biosensors to compare their validation.

Developments in mycotoxin analysis: an update for 2016-2017

This review summarises developments in the determination of mycotoxins over a period between mid-2016 and mid-2017. Analytical methods to determine aflatoxins, Alternaria toxins, ergot alkaloids, fumonisins, ochratoxins, patulin, trichothecenes and zearalenone are covered in individual sections. Advances in proper sampling strategies are discussed in a dedicated section, as are methods used to analyse botanicals and spices and newly developed LC-MS based multi-mycotoxin methods. This critical review aims to briefly discuss the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

Homogeneous electrochemical aptasensor based on a dual amplification strategy for sensitive detection of profenofos residues

A homogeneous type of electrochemical aptasensor was designed based upon the principle of target-induced and tool enzyme-assisted signal amplification, which was employed for the detection of profenofos residues.