Reduced graphene oxide/BiFeO3 nanohybrids-based signal-on photoelectrochemical sensing system for prostate-specific antigen detection coupling with magnetic microfluidic device

Advanced Metal-Organic Frameworks-Based Catalysts in Electrochemical Sensors

Developing efficient catalysts is vital for the application of electrochemical sensors. Metal-organic frameworks (MOFs), with high porosity, large specific surface area, good conductivity, and biocompatibility, have been widely used in catalysis, adsorption, separation, and energy storage applications. In this invited review, the recent advances of a novel MOF-based catalysts in electrochemical sensors are summarized. Based on the structure-activity-performance relationship of MOF-based catalysts, their mechanism as electrochemical sensor, including metal cations, synthetic ligands, and structure, are introduced. Then, the MOF-based composites are successively divided into metal-based, carbon-based, and other MOF-based composites. Furthermore, their application in environmental monitoring, food safety control, and clinical diagnosis is discussed. The perspective and challenges for advanced MOF-based composites are proposed at the end of this contribution.

A novel electrochemical sandwich-like immunosensor based on carboxyl Ti3C2Tx MXene and rhodamine b/gold/reduced graphene oxide for Listeria monocytogenes

Listeria monocytogenes (LM) is one of the most common food-borne pathogens and can induce a series of diseases with a high mortality rate to humans; hence, it is very necessary to develop a highly sensitive method for LM detection. Based on this need, a new sandwich-like electrochemical immunosensing platform was developed herein by preparing carboxyl Ti₃C₂T_x MXene (C-Ti₃C₂T_x MXene) as the sensing platform and rhodamine b/gold/reduced graphene oxide (RhB/Au/RGO) as the signal amplifier. The high conductivity and large surface area of C-Ti₃C₂T_x MXene make it a desirable nanomaterial to fix the primary antibody of LM (PAb), while the prepared Au/RGO/RhB nanohybrid is dedicated to assembling the secondary antibody (SAb) of LM, offering an amplified response signal. Through the use of RhB molecule as the signal probe, the experiments showed that the peak currents of RhB increase along with an increase in the concentration of LM from 10 to 10⁵ CFU mL^-1, and an extremely low limit of detection (2 CFU mL^-1) was obtained on the basis of the proposed immunosensing platform after optimizing various conditions. Hence, it is confirmed that the developed sandwich-like immunosensor based on C-Ti₃C₂T_x MXene and RhB/Au/Gr has great application in the detection of LM and other analytes.

Exploiting Photoelectric Activities and Piezoelectric Properties of NaNbO3 Semiconductors for Point-of-Care Immunoassay

Point-of-care testing (POCT) technology has made major breakthroughs in community medicine and physician office situations, in tandem with the more ubiquitous and intensive usage of highly integrated quick detection equipment for illness diagnosis, personal care, and mobile healthcare. Although the photoelectrochemical (PEC)-based POCT platform offers the benefits of cheap cost and good user engagement, its commercialization is still limited by the photodetection components' downsizing and mobility, among other factors. In this work, a novel highly integrated PEC biosensor aided by piezophototronics to enhance the efficiency of PEC testing was reported for flexible detection of cancer-associated antigens in biological fluids (prostate-specific antigen, PSA, used as an example). Multiple signal enhancement strategies, including a magnetic bead-linked enzyme-linked immune system catalyzing the production of ascorbic acid from the substrate and a piezoelectric-assisted enhancement strategy, were used for sensitive detection of the analyte to be tested in human body fluids. Unlike the electron transfer mechanism in heterojunctions, piezoelectric semiconductors promote the transfer of electrons and holes by generating piezoelectric potentials in the ultrasonic field, thus contributing to the performance of the PEC testbed. Under optimized conditions, the test platform achieves good correspondence for PSA at 0.02-40 ng mL^-1. Impressively, the test devices are comparable to or even superior to gold standard ELISA kits in terms of cost approval and batch testing. This research demonstrates the potential of piezoelectric semiconductors for POC applications in revolutionary PECs and offers innovative thoughts for the development of new PEC bioanalytical components.

Recent Progress of Magnetically Actuated DNA Micro/Nanorobots

In the past few decades, the field of DNA origami-based micro/nanotechnology has developed dramatically and spawned attention increasingly, as its high integrality, rigid structure, and excellent resistance ability to enzyme digestion. Many two-dimensional and three-dimensional DNA nanostructures coordinated with optical, chemical, or magnetic triggers have been designed and assembled, extensively used as versatile templates for molecular robots, nanosensors, and intracellular drug delivery. The magnetic field has been widely regarded as an ideal driving and operating system for micro/nanomaterials, as it does not require high-intensity lasers like light control, nor does it need to change the chemical composition similar to chemical activation. Herein, we review the recent achievements in the induction and actuation of DNA origami-based nanodevices that respond to magnetic fields. These magnetic actuation-based DNA nanodevices were regularly combined with magnetic beads or gold nanoparticles and applied to generate single-stranded scaffolds, assemble various DNA nanostructures, and purify specific DNA nanostructures. Moreover, they also produced artificial magnetism or moved regularly driven by external magnetic fields to explain deeper scientific issues.

Quantitative determination of uric acid using paper-based biosensor modified with graphene oxide and 5-amino-1,3,4-thiadiazole-2-thiol

Uric acid is the primary end product of human purine metabolism and has been regarded as a key parameter in urine and blood for monitoring physiological conditions. This paper presents a paper-based biosensor for a quantitative determination of uric acid using electrochemical detection. The working electrode of the biosensor is modified with graphene oxide (GO) and 5-amino-1,3,4-thiadiazole-2-thiol (ATT) by electropolymerizing ATT on the surface of graphene oxide. In this study, cyclic voltammetry (CV) measurements required only 200 μL of analyte solution. The experimental results showed that the oxidation peak current increased as the concentration of uric acid become higher and exhibited a linear relationship in the concentration range of 0.1-10 mM, indicating that this proposed biosensor has high sensitivity. In addition, this biosensor has good selectivity to detect uric acid because ATT has a specific binding with it. In human blood and body fluids, nitrites may be the only factor that can interfere with the detection of uric acid using this proposed biosensor. Nevertheless, uric acid can be discriminated from nitrite in the CV measurement due to different oxidation potentials. Thus, this proposed paper-based biosensor is a promising tool for detecting uric acid in biological samples.

Recent advances in nanomaterials for prostate cancer detection and diagnosis

Despite the significant progress in the discovery of biomarkers and the exploitation of technologies for prostate cancer (PCa) detection and diagnosis, the initial screening of these PCa-related biomarkers using current...

Traditional and new applications of the HCR in biosensing and biomedicine

The hybridization chain reaction is a very popular isothermal nucleic acid amplification technology. A single-stranded DNA initiator triggers an alternate hybridization event between two hairpins forming a double helix polymer. Due to isothermal, enzyme-free and high amplification efficiency characteristics, the HCR is often used as a signal amplification technology for various biosensing and biomedicine fields. However, as an enzyme-free self-assembly reaction, it has some inevitable shortcomings of relatively slow kinetics, low cell internalization efficiency, weak biostability of DNA probes and uncontrollable reaction in these applications. More and more researchers use this reaction system to synthesize new materials. New materials can avoid these problems skillfully by virtue of their inherent biological characteristics, molecular recognition ability, sequence programmability and biocompatibility. Here, we summarized the traditional application of the HCR in biosensing and biomedicine in recent years, and also introduced its new application in the synthesis of new materials for biosensing and biomedicine. Finally, we summarized the development and challenges of the HCR in biosensing and biomedicine in recent years. We hope to give readers some enlightenment and help.

Proximity binding induced nucleic acid cascade amplification strategy for ultrasensitive homogeneous detection of PSA

In this work, based on the powerful cycle amplification cascades of proximity hybridization-induced hybridization chain reaction and catalyzed hairpin assembly, we engineered a nonenzymatic and ultrasensitive method which combined the Mg²⁺-DNAzyme recycling signal amplification for the analysis of the human prostate specific antigen. Herein, we adopted PSA-conjugates as triggers in the self-assembly process of two hairpin DNAs (H1, H2) into the products of the CHA which could activate the HCR to induce repeated hybridization. And both ends of each adjacent sequence of the HCR products could form a unit of Mg²⁺-DNAzyme which in presence of cofactor Mg²⁺ could recognize and cyclically cleave the hairpin probes in the solution and thus generate observably enhanced fluorescent signal. Benefit from the nucleic acid circuit amplification strategy, PSA of concentration low to 0.73 pg mL^-1 was detected in this system. This homogeneous sensing method in solution avoid the use of the sophisticated equipment and complex operation, as well as addition of artificial enzyme, thus greatly reducing the constraints and complexity of experimental conditions. Moreover, considering most protein biomarkers in serum don't have their corresponding aptamers, this sensing method provide a general sensing approach for homogeneous sensitive detection of these important protein biomarkers which transfer rough antigen-antibody interactivity to smart signal amplification sensing strategies, thus exhibiting a remarkable prospect in clinical application.

Ultra pH-sensitive detection of total and free prostate-specific antigen using electrochemical aptasensor based on reduced graphene oxide/gold nanoparticles emphasis on TiO2/carbon quantum dots as a redox probe

The development of a rapid, sensitive, and straightforward detection method of prostate-specific antigen (PSA) is indispensable for the early diagnosis of prostate cancer (PCa). This work relates an electrochemical method using functionalized single-stranded DNA aptamer to diagnose PCa and benign prostate hyperplasia. The sensing platform relies on PSA recognition by aptamer/Au/GO-nanohybrid-modified glassy carbon electrode. Besides ferrocyanide TiO2/carbon quantum dots (CQDs) probe is used to investigate the effect of nanoparticle-containing electrolyte. Optimization of incubation time of aptamer/Au/GO-nanohybrid and volume fraction of nafion were done using Design Expert 10 software reporting 42.4 h and 0.095% V/V, respectively. In ferrocyanide medium, PSA detection as low as 3, 2.96, and 0.85 ng mL-1 was achieved with a dynamic range from 0.5 to 7 ng ml-1, in accord with clinical values, using cyclic voltammetry, square wave voltammetry, and electrochemical impedance spectroscopy, respectively. Moreover, this sensor exhibited conspicuous performance in TiO2/CQDs-containing medium with different pH values of 5.4 and 8 to distinguish total PSA and free PSA, resulting in very low limit of detections, 0.028, and 0.007 ng ml-1, respectively. The results manifested the proposed system as a forthcoming sensor in a clinical and point of care analysis of PSA.

Plasmon Assisted Highly Efficient Visible Light Catalytic CO2 Reduction Over the Noble Metal Decorated Sr-Incorporated g-C3N4

The photocatalytic performance of g-C₃N₄ for CO₂ conversion is still inadequate by several shortfalls including the instability, insufficient solar light absorption and rapid charge carrier's recombination rate. To solve these problems, herein, noble metals (Pt and Au) decorated Sr-incorporated g-C₃N₄ photocatalysts are fabricated via the simple calcination and photo-deposition methods. The Sr-incorporation remarkably reduced the g-C₃N₄ band gap from 2.7 to 2.54 eV, as evidenced by the UV-visible absorption spectra and the density functional theory results. The CO₂ conversion performance of the catalysts was evaluated under visible light irradiation. The Pt/0.15Sr-CN sample produced 48.55 and 74.54 µmol h^-1 g^-1 of CH₄ and CO, respectively. These amounts are far greater than that produced by the Au/0.15Sr-CN, 0.15Sr-CN, and CN samples. A high quantum efficiency of 2.92% is predicted for the Pt/0.15Sr-CN sample. Further, the stability of the photocatalyst is confirmed via the photocatalytic recyclable test. The improved CO₂ conversion performance of the catalyst is accredited to the promoted light absorption and remarkably enhanced charge separation via the Sr-incorporated mid gap states and the localized surface plasmon resonance effect induced by noble metal nanoparticles. This work will provide a new approach for promoting the catalytic efficiency of g-C₃N₄ for efficient solar fuel production.

Visible-Light-Assisted Photoelectrochemical Biosensing of Uric Acid Using Metal-Free Graphene Oxide Nanoribbons

In this study, we demonstrate the visible-light-assisted photoelectrochemical (PEC) biosensing of uric acid (UA) by using graphene oxide nanoribbons (GONRs) as PEC electrode materials. Specifically, GONRs with controlled properties were synthesized by the microwave-assisted exfoliation of multi-walled carbon nanotubes. For the detection of UA, GONRs were adopted to modify either a screen-printed carbon electrode (SPCE) or a glassy carbon electrode (GCE). Cyclic voltammetry analyses indicated that all Faradaic currents of UA oxidation on GONRs with different unzipping/exfoliating levels on SPCE increased by more than 20.0% under AM 1.5 irradiation. Among these, the GONRs synthesized under a microwave power of 200 W, namely GONR(200 W), exhibited the highest increase in Faradaic current. Notably, the GONR(200 W)/GCE electrodes revealed a remarkable elevation (~40.0%) of the Faradaic current when irradiated by light-emitting diode (LED) light sources under an intensity of illumination of 80 mW/cm². Therefore, it is believed that our GONRs hold great potential for developing a novel platform for PEC biosensing.

Microfluidic Ratiometric Photoelectrochemical Biosensor Using a Magnetic Field on a Photochromic Composite Platform: A Proof-of-Concept Study for Magnetic-Photoelectrochemical Bioanalysis

Integrating a microfluidic sensor with a ratiometric photoelectrochemical (PEC) strategy to build a bioanalysis device for actual sample testing is often limited to large-volume space-resolution equipment and wavelength-dependent or potential-dependent paired photoactive materials. This work reports a microfluidic ratiometric magnetic-photoelectrochemical (M-PEC) biosensor on the photochromic composite platform to solve the above problems. In particular, as a proof-of-concept study, the platform Bi₂WO_6-x/amorphous BiOCl nanosheets/Bi₂S₃ (p-BWO-s) mediated by photochromic color centers and the magnetic photoactive secondary antibody marker ZnFe₂O₄@Ag₂O are integrated on the microfluidic biosensor. By enhancement of the photochromic color centers, p-BWO-s outputs a considerable photocurrent signal. Meanwhile, the photoactivity of the secondary antibody marker can be changed with a magnetic field; thus, different photocurrent signals can be obtained to realize ratiometric detection. The quenching photocurrent signal without the magnetic field and the difference photocurrent signal under the magnetic field are quantitatively related to the target concentration, which unfolds a novel general strategy for bioanalysis. Different from traditional ratiometric PEC biosensors, this work characterizes the first ratiometric PEC biosensor based on an external magnetic field. Generally speaking, combined with different biorecognition cases, this scheme with good expansibility brings a unique new perspective.

Application of Functionalized Graphene Oxide Based Biosensors for Health Monitoring: Simple Graphene Derivatives to 3D Printed Platforms

Biosensors hold great potential for revolutionizing personalized medicine and environmental monitoring. Their construction is the key factor which depends on either manufacturing techniques or robust sensing materials to improve efficacy of the device. Functional graphene is an attractive choice for transducing material due to its various advantages in interfacing with biorecognition elements. Graphene and its derivatives such as graphene oxide (GO) are thus being used extensively for biosensors for monitoring of diseases. In addition, graphene can be patterned to a variety of structures and is incorporated into biosensor devices such as microfluidic devices and electrochemical and plasmonic sensors. Among biosensing materials, GO is gaining much attention due to its easy synthesis process and patternable features, high functionality, and high electron transfer properties with a large surface area leading to sensitive point-of-use applications. Considering demand and recent challenges, this perspective review is an attempt to describe state-of-the-art biosensors based on functional graphene. Special emphasis is given to elucidating the mechanism of sensing while discussing different applications. Further, we describe the future prospects of functional GO-based biosensors for health care and environmental monitoring with a focus on additive manufacturing such as 3D printing.

An electrochemical immunosensor based on reduced graphene oxide/multiwalled carbon nanotubes/thionine/gold nanoparticle nanocomposites for the sensitive testing of follicle-stimulating hormone

Follicle-Stimulating Hormone (FSH) is a kind of gonadotropin which can promote human reproduction and development. Abnormal FSH levels may lead to endocrine disorders and infertility. Sensitive determination of FSH is very significant for the clinical diagnosis of these diseases. Here, an electrochemical immunosensor based on a screen-printed electrode (SPE) was developed for the detection of FSH. Nanocomposites, compounded with reduced graphene oxide (rGO), multiwalled carbon nanotubes (MWCNTs), thionine (Thi) and gold nanoparticles (AuNPs), were used for increasing the specific surface area to adsorb molecules and amplify signals. The rGO/MWCNTs/Thi/AuNP nanocomposites, anti-FSH and BSA were successively assembled onto a SPE to fabricate the immunosensor. Electrochemical performance of the modified immunosensor was studied by differential pulse voltammetry (DPV), cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). FSH testing was based on the principle that the insulating FSH antigen-antibody immunocomplex could retard the electron transfer of Thi which led to the decrease of the DPV current response. Under optimum conditions, the rGO/MWCNTs/Thi/AuNP modified immunosensor exhibited high sensitivity and accuracy for the determination of FSH in a linear range from 1 mIU mL^-1 to 250 mIU mL^-1, and the detection limit was 0.05 mIU mL^-1 at a signal-to-noise ratio of 3. The immunosensor was successfully applied for the determination of quality serum samples with a recovery of 94.0-109.8%. The electrochemical immunosensor could be utilized for testing other gonadotropins.

A label-free photoelectrochemical immunosensor for prostate specific antigen detection based on Ag2S sensitized Ag/AgBr/BiOBr heterojunction by in-situ growth method

Prostate cancer is one of the most common cancers in the world, and its early detection is vital to saving the lives of patients. In this research, a novel label-free photoelectrochemical immunosensor was designed for sensitive detection of prostate specific antigen (PSA). Ag₂S sensitized on Ag/AgBr/BiOBr heterojunction could effectively inhibit photogenic holes recombination and improve photocurrent response and sensitivity. Ascorbic acid was an effective electron donor, which can effectively eliminate photo-generated holes. The photocurrent reduced linearly with the logarithm of PSA concentration ranged from 0.001 to 50 ng·mL^-1 and the limit of detection was 0.25 pg·mL^-1. The designed sensor had the advantages of wide linear range, good stability, high reproducibility, and good selectivity. This study not only provided a method for efficient and sensitive detection of PSA, but also provided valuable reference ideas for the detection of other tumor markers.

Electrochemical aptasensor for Escherichia coli O157:H7 bacteria detection using a nanocomposite of reduced graphene oxide, gold nanoparticles and polyvinyl alcohol

In recent years, public attention has drawn to food safety due to the constant outbreaks of foodborne diseases; subsequently, to control and prevent this group of diseases, early screening of foodborne pathogens has become significant. In this study, a new aptamer-based electrochemical sensor was proposed to detect Escherichia coli O157:H7 (E. coli), one of the most threatening bacterial pathogens, using nanoparticles-modified glassy carbon electrode. Firstly, the electrode was coated with a reduced graphene oxide-poly(vinyl alcohol) and gold nanoparticles nanocomposite (AuNPs/rGO-PVA/GCE) to increase the electrode surface area and consequently raise the sensor sensitivity. Afterwards, to enhance the selectivity of the modified electrode, aptamers were attached to the surface of the prepared electrode. The prepared electrode was characterized using energy-dispersive spectroscopy, field-emission scanning electron microscopy, atomic force microscopy, Fourier-transform infrared spectroscopy, and electrochemical impedance spectroscopy. The relationship of the E. coli concentration and the peak current in the range from 9.2 CFU mL^-1 to 9.2 × 10⁸ CFU mL^-1 was linear, and the limit of detection was calculated as 9.34 CFU mL^-1. The suitability of the proposed sensor for real sample measurements was investigated by recovery studies in tap water, milk, and meat samples. The results showed that the biosensor and traditional culture counting methods are equally sensitive for detecting E. coli.

Aptasensing luteinizing hormone to determine gynecological endocrine complications on graphene oxide layered sensor

Luteinizing hormone (LH)/lutropin is an interstitial cell-stimulating hormone playing a predominant role in the reproductive system, and highly correlated with the infertility treatment in both men and women. This research was concentrated to quantify LH level by using interdigitated electrode sensor. To improve the electric current flow, sensing electrode was modified with graphene oxide (GO) and the aptamer probe was attached on GO through biotin-streptavidin linker. Current responses were measured with aptamer-LH interaction at the target concentrations between 7.5 nM and 1 μM and the detection limit of LH was calculated as 60 nM with the determination coefficient (R² ) value, 0.9229 [y = 1.296x - 2.8435] on a linear range from 30 nM to 1 μM. Further, biofouling effect on sensing electrode surface was analyzed with complementary aptamer sequence, control proteins (albumin and globulin). The above GO-aptamer-modified interdigitated electrode sensor helps to quantify LH level and diagnose gynecological endocrinology-related complications.

Application of Microfluidics in Immunoassay: Recent Advancements

In recent years, point-of-care testing has played an important role in immunoassay, biochemical analysis, and molecular diagnosis, especially in low-resource settings. Among various point-of-care-testing platforms, microfluidic chips have many outstanding advantages. Microfluidic chip applies the technology of miniaturizing conventional laboratory which enables the whole biochemical process including reagent loading, reaction, separation, and detection on the microchip. As a result, microfluidic platform has become a hotspot of research in the fields of food safety, health care, and environmental monitoring in the past few decades. Here, the state-of-the-art application of microfluidics in immunoassay in the past decade will be reviewed. According to different driving forces of fluid, microfluidic platform is divided into two parts: passive manipulation and active manipulation. In passive manipulation, we focus on the capillary-driven microfluidics, while in active manipulation, we introduce pressure microfluidics, centrifugal microfluidics, electric microfluidics, optofluidics, magnetic microfluidics, and digital microfluidics. Additionally, within the introduction of each platform, innovation of the methods used and their corresponding performance improvement will be discussed. Ultimately, the shortcomings of different platforms and approaches for improvement will be proposed.

Ultrasensitive and Selective Impedimetric Determination of Prostate Specific Membrane Antigen Based on Di-Succinimide Functionalized Polythiophene Covered Cost-Effective Indium Tin Oxide

A new and ultrasensitive impedimetric biosensor fabricated by using conjugated di-succinimide substituted polythiophene (P(ThidiSuc)) polymer modified indium tin oxide electrode is developed for the first time to detect the prostate specific membrane antigen (PSMA). The polymer P(Thi-diSuc) is synthesized by using a simple way and used in the fabrication of the proposed biosensor. The synthesized polymer contains di-succinimide groups, which offers covalent immobilization of PSMA specific antibodies. The developed strategy shortens the biosensor fabrication steps, because these active groups bind covalently to the amino ends of PSMA specific antibodies and this reaction does not require any crosslinking agent. Various characterization studies like impedimetric and voltammetric measurements, and morphological analyses are utilized to confirm the successful development of the biosensor. Under optimum conditions, the biosensing ability of the PSMA determination has a wide linear determination range from 0.015 to 14.4 pg mL^-1 , as well as a low limit of detection of 6.4 fg mL^-1 and a high sensitivity of 1.36 kohm pg^-1 mL cm^-2 . Furthermore, the proposed biosensor is able to measure the PSMA antigen in real human serums, which offers that it is a simple, low-cost, and sensitive tool with excellent potential for application in the quantification of PSMA.

Enhanced adsorption of malathion and phoxim by a three-dimensional magnetic graphene oxide-functionalized citrus peel-derived bio-composite

By integrating the steps of direct magnetization and one-pot pyrolysis, a three-dimensional (3D) magnetic graphene oxide-functionalized citrus peel-derived bio-composite (mGOBC) was synthesized and characterized successfully, and it was proved to possess a three-dimensional (3D) porous architecture and graphitic structure. Its potential as an enrichment adsorbent was investigated using adsorption kinetics and adsorption isotherm models to establish an effective analytical method for the determination of organophosphorus pesticides (OPPs) in vegetables. The experimental results indicated that the adsorption was better fitted with the pseudo second order model and Langmuir isotherm model, and the maximum adsorption capacities for malathion and phoxim were 25.26 mg g-1 and 42.31 mg g-1, respectively. It was found that the graphitic structure of mGOBC resulted in π-π EDA (electron donor-acceptor) interaction with the benzene rings, electron-donating N, P, and S atoms in the analytes, which assisted adsorption. Subsequently, Plackett-Burman (P-B) experimental design, central composite design (CCD) and response surface methodology (RSM) were employed to develop an analytical method based on the mGOBC adsorbent. Under optimal conditions, the developed method is accurate and precise. The novel synthesized mGOBC can efficiently achieve removal and trace determination of harmful OPPs.

An Enzyme-Based Biosensor for the Detection of Organophosphate Compounds Using Mutant Phosphotriesterase Immobilized onto Reduced Graphene Oxide

Enzymatic detection of organophosphate (OP) compounds can be tailored using highly sensitive and selective enzymes in the development of biosensors. Previously, mutant (YT) phosphotriesterase (PTE) was reported to efficiently hydrolyze Sp and Rp enantiomers of phosphotriester. This study reports the use of phosphotriesterase mutant YT (YT-PTE) immobilized onto reduced graphene oxide (rGO) and fabricated onto a screen-printed carbon electrode (SPCE) for electrochemical detection of OP compounds. Immobilization of YT-PTE onto rGO was secured using N-hydroxysuccinimide (NHS) and N-(3-dimethylaminopropyl)-N’-ethylcarbodiimide (EDC) cross-linker, and the resulting immobilized enzyme was able to retain up to 90% of its activity. Electrochemical analysis of the SPCE/rGO/YT-PTE showed detection of paraoxon in a linear range of 1 mM–0.005 μM with its limit of detection as low as 0.11 μM. SPCE/rGO/YT-PTE exhibited high selectivity towards paraoxon and parathion and have good reproducibility. Furthermore, detection of paraoxon was also possible in a real water sample with only minor interferences.

Persistent luminescence nanorods-based autofluorescence-free biosensor for prostate-specific antigen detection

Persistent luminescent nanoparticles (PLNPs) are a class of materials with excellent optical properties, which can continue to emit light for a long time after removing the excitation light source. This feature enables PLNPs to be used for development of biological detection modes without autofluorescence background. In this study, we prepared Zn₂GeO₄: Mn²⁺, Pr³⁺ (ZGOMP) nanorods through a one-pot hydrothermal method. Using the pH-responsive luminescence behavior of ZGOMP, we developed an autofluorescence-free biosensor using ZGOMP as a probe and gluconic acid as a quencher to detect prostate-specific antigen (PSA). Hybridization chain reaction (HCR) and magnetic separation system were introduced in the design to achieve efficient signal amplification. Under the optimal conditions, the as-designed autofluorescence-free sensing platform showed high selectivity, and showed a good luminescence response to PSA within the linear range of 0.001-10 ng/mL at a detection limit of 0.64 pg/mL. The excellent analytical performance shows that the current strategy provides an effective platform for clinical sample analysis.

Prostate cancer and microfluids

Microfluidic systems aim to detect sample matter quickly with high sensitivity and resolution, on a small scale. With its increased use in medicine, the field is showing significant promise in prostate cancer diagnosis and management due, in part, to its ability to offer point-of-care testing. This review highlights some of the research that has been undertaken in respect of prostate cancer and microfluidics. Firstly, this review considers the diagnosis of prostate cancer through use of microfluidic systems and analyses the detection of prostate specific antigen, proteins, and circulating tumor cells to highlight the scope of current advancements. Secondly, this review analyses progressions in the understanding of prostate cancer physiology and considers techniques used to aid treatment of prostate cancer, such as the creation of a micro-environment. Finally, this review highlights potential future roles of microfluidics in assisting prostate cancer, such as in exosomal analysis. In conclusion, this review shows the vast scope and application of microfluidic systems and how these systems will ensure advancements to future prostate cancer management.

Recent advances in DNA walker machines and their applications coupled with signal amplification strategies: A critical review

DNA walkers, a type of dynamic nanomachines, have become the subject of burgeoning research in the field of biology. These walkers are powered by driving forces based on strand displacement reactions, protein enzyme/DNAzyme reactions and conformational transitions. With the unique properties of high directionality, flexibility and efficiency, DNA walkers move progressively and autonomously along multiple dimensional tracks, offering abundant and promising applications in biosensing, material assembly and synthesis, and early cancer diagnosis. Notably, DNA walkers identified as signal amplifiers can be combined with various amplification approaches to enhance signal transduction and amplify biosensor sensing signals. Herein, we systematically and comprehensively review the walking principles of various DNA walkers and the recent progress on multiple dimensional tracks by presenting representative examples and an insightful discussion. We also summarized and categorized the diverse signal amplification strategies with which DNA walkers have coupled. Finally, we outline the challenges and future trends of DNA walker machines in emerging analytical fields.

Nanostructure-based photoelectrochemical sensing platforms for biomedical applications

As a newly developed and powerful analytical method, the use of photoelectrochemical (PEC) biosensors opens up new opportunities to provide wide applications in the early diagnosis of diseases, environmental monitoring and food safety detection. The properties of diverse photoactive materials are one of the essential factors, which can greatly impact the PEC performance. The continuous development of nanotechnology has injected new vitality into the field of PEC biosensors. In many studies, much effort on PEC sensing with semiconductor materials is highlighted. Thus, we propose a systematic introduction to the recent progress in nanostructure-based PEC biosensors to exploit more promising materials and advanced PEC technologies. This review briefly evaluates the several advanced photoactive nanomaterials in the PEC field with an emphasis on the charge separation and transfer mechanism over the past few years. In addition, we introduce the application and research progress of PEC sensors from the perspective of basic principles, and give a brief overview of the main advances in the versatile sensing pattern of nanostructure-based PEC platforms. This last section covers the aspects of future prospects and challenges in the nanostructure-based PEC analysis field.

Microfluidics-Based Sensing of Biospecies

Over the past decades, microfluidic devices based on many advanced techniques have aroused widespread attention in the fields of chemical, biological, and analytical applications. Integration of microdevices with a variety of chip designs will facilitate promising functionality. Notably, the combination of microfluidics with functional nanomaterials may provide creative ideas to achieve rapid and sensitive detection of various biospecies. In this review, focused on the microfluids and microdevices in terms of their fabrication, integration, and functions, we summarize the up-to-date developments in microfluidics-based analysis of biospecies, where biomarkers, small molecules, cells, and pathogens as representative biospecies have been explored in-depth. The promising applications of microfluidic biosensors including clinical diagnosis, food safety control, and environmental monitoring are also discussed. This review aims to highlight the importance of microfluidics-based biosensors in achieving high throughput, highly sensitive, and low-cost analysis and to promote microfluidics toward a wider range of applications.

High performance Pb+2 detection using CVD-produced high quality multilayer reduced graphene oxide

Detection of heavy metals such as Pb+2 is critical due to their high toxicity as even trace amounts of them pose a serious detrimental risk to human health. Pb2+ is one of the major toxic and persistent pollutants generated from industry and commonly found in soil, drinking water, and aquatic environments. Due to its high-mobility and one-atom thickness, graphene (Gr) based materials have shown great potential for chemical sensors of heavy metals. Recently, a novel conductive reduced-GO obtained by chemical vapor deposition (CVD-rMGO) showed improved layering structure and conductivity over conventional rGO based on chemically exfoliated flakes. Herein, utilizing this novel rGO obtained from chemical vapor deposition, we showed improved Pb2+ detection using both electrochemical and conductivity sensing. For electrochemical sensing, a CVD-rMGO film is used as working electrode and cyclic voltammetry is used to detect Pb+2 ions accumulated on the CVD-rMGO, obtaining a sensitivity of 4.6 nA nM−1cm−2 and a calculated limit of detection of 0.21 nM. For electrical sensing, the drain current through a CVD-rMGO was monitored as the film as exposed to different concentrations of Pb+2, reaching an estimated limit of detection of 0.101 nM. This work shows that high-quality reduced graphene oxide produced by chemical vapor deposition can serve as a basis enable high-sensitivity detectors of Pb2+.

Application of reduced graphene oxide-based actuators for real-time chemical sensing of liquid and vapour phase contaminants

The possibility of employing responsive materials for the in situ detection of chemical contaminants in the liquid phase is demonstrated here.

Ultrasensitive electrochemical assay for microRNA-21 based on CRISPR/Cas13a-assisted catalytic hairpin assembly

MicroRNAs (miRNAs) are related to many biological processes and regarded as biomarkers of disease. Rapid, sensitive, and specific methods for miRNA assay are very important for early disease diagnostic and therapy. In the present work, an ultrasensitive electrochemical biosensing platform has been developed for miRNA-21 assay by combining CRISPR-Cas13a system and catalytic hairpin assembly (CHA). In the presence of miRNA-21, it would hybridize with the spacer region of Cas13a/crRNA duplex to activate the cleavage activity of CRISPR-Cas13a system, leading to the release of initiator of CHA to generate amplified electrochemical signals. Base on the CRISPR-Cas13a-mediated cascade signal amplification strategy, the developed electrochemical biosensing platform exhibited high sensitivity with a low detection limit of 2.6 fM (S/N = 3), indicating that the platform has great potential for application in early clinical diagnostic.

Detection of interleukin-8 on microgapped dual electrodes for measuring asthma complication

Detection of asthma by a suitable biomarker is mandatory for the early identification, which helps in providing a right medication for the complete cure. Interleukins (ILs) have played a major role in asthma; in particular IL-8 is highly correlated with severe asthma. This research was focused on to detect IL-8 level by its partner antibody on a microgapped dual electrodes sensor. The sensing surface was modified into graphene oxide (GO), and an antibody was fixed by using the amine-aldehyde linker. GO enhanced the antibody immobilization and the consequence electric current flow upon interacting with IL-8. The detection limit of IL-8 was reached to 10 pg/mL in a linear range from 1 to 10,000 pg/mL with the regression of y = 0.7246x - 0.906 (R² = 0.9758); further, the sensitivity falls at 1 pg/mL. The surface does not show the antifouling effect with control antibody, and proteins, indicating the specific IL-8 detection. The detection of IL-8 helps in diagnosing and solving the related problems of asthmatic patients.

Competitive aptasensor for the ultrasensitive multiplexed detection of cancer biomarkers by fluorescent nanoparticle counting

Cancer biomarker quantification in human serum is of great importance for accurate patient diagnosis and informed clinical management. To date, ultrasensitive multiplexed detection of proteins without amplification is still a major challenge. Herein, we proposed a competitive aptasensor strategy for ultrasensitive multiplexed cancer biomarker detection by fluorescent nanoparticle (FNP) counting. The sequences are designed such that the binding abilities of linker DNA (L-DNA) with DNA-functionalized FNPs (DNA-FNPs) and aptamer are comparable. As long as one target binds with one molecule of aptamer, a signalling FNP forms a sandwich-structured nanocomposite, which was subsequently observed and enumerated with a fluorescence microscope. This 1 : 1 target-to-signal FNP production assured an improved sensitivity, benefiting from the reasonably good brightness and photostability of FNPs. For both singleplexed and multiplexed detection, this proposed strategy achieved an approximately 1000-fold improved limit of detection than the conventional method with the detection volume of 3.2 μL. Notably, the results for carcinoembryonic antigen (CEA) detection obtained directly from 9 human serum samples (colorectal/lung/healthy individuals) were consistent with that obtained by ELISA, showing potential application in clinical diagnosis.

Biosensing of prostate specific antigen (PSA) in human plasma samples using biomacromolecule encapsulation into KCC-1-npr-NH2: A new platform for prostate cancer detection

Prostate-specific antigen (PSA) is a high molecular weight glycoprotein that is used as a marker for the diagnosis of prostate cancer and is therefore important in the medical field. In this study, a novel sandwich type immunoassay was designed based on encapsulation of biotinylated antibody into KCC-1-npr-NH₂. KCC-1-npr-NH₂ stabilized the stability of the primary antibody. So, encapsulated Ab1 was immobilized on the surface of glassy carbon electrode. Field emission scanning electron microscope (FE-SEM) was employed to monitor the sensor fabrication. The engineered immunosensor was used for the detection of PSA using differential pulse voltammetry (DPVs) and square wave voltammetry (SWVs) techniques. The proposed interface lead to enhancement of accessible surface area for immobilizing a high amount of anti-PSA antibody, increasing electrical conductivity, boosting stability, catalytic properties and biocompatibility. The intensity of electrochemical signals is also increased by the use of AuNPs functionalized with CysA used in secondary antibody (HRP conjugated PSA) structure. Under optimal conditions, the designed immuno-assay provide a good analytical performance for quantifying the PSA marker in the linear range of 1 to 60 μg/l.

One-step and ultrasensitive ATP detection by using positively charged nano-gold@graphene oxide as a versatile nanocomposite

A versatile nanocomposite was simply prepared based upon the electrostatic adsorption of positively charged gold nanoparticles with negatively charged graphene oxide (nano-gold@GO), and utilized as a novel fluorescence quenching platform for ultrasensitive detection of adenosine triphosphate (ATP). In the designed system, DNA-stabilized Ag nanoclusters (DNA/AgNCs) were used as fluorescent probes, DNA duplex was formed in the presence of ATP, and they can electrostatically adsorb onto the surface of nano-gold@GO to quench the fluorescence signal. Upon the addition of exonuclease III (Exo III), the DNA duplex would be hydrolyzed into DNA fragments and resulted in the recovery of the fluorescence signals due to the diffusion of AgNCs away from nano-gold@GO. Based on these, sensitive detection of ATP was realized with a detection range of 5.0 pM-20 nM. Notably, a good recovery in the range of 94-104% was obtained when detecting ATP in human serum samples, indicating a promising application value in early disease diagnosis. Graphical abstract A functional positively charged nano-gold@graphene oxide was fabricated and utilized as an enhanced fluorescence quenching platform for the detection of ATP, coupled with exonuclease III-assisted signal amplification.

Performance of Graphene-CdS Hybrid Nanocomposite Thin Film for Applications in Cu(In,Ga)Se2 Solar Cell and H2 Production

A graphene-cadmium sulfide (Gr-CdS) nanocomposite was prepared by a chemical solution method, and its material properties were characterized by several analysis techniques. The synthesized pure CdS nanoparticles (NPs) and Gr-CdS nanocomposites were confirmed to have a stoichiometric atomic ratio (Cd/S = 1:1). The Cd 3d and S 2p peaks of the Gr-CdS nanocomposite appeared at lower binding energies compared to those of the pure CdS NPs according to X-ray photoelectron spectroscopy analyses. The formation of the Gr-CdS nanocomposite was also evidenced by the structural analysis using Raman spectroscopy and X-ray diffraction. Transmission electron microscopy confirmed that CdS NPs were uniformly distributed on the graphene sheets. The absorption spectra of both the Gr-CdS nanocomposite and pure CdS NPs thin films showed an absorption edge at 550 nm related to the energy band gap of CdS (~2.42 eV). The Cu(In,Ga)Se₂ thin film photovoltaic device with Gr-CdS nanocomposite buffer layer showed a higher electrical conversion efficiency than that with pure CdS NPs thin film buffer layer. In addition, the water splitting efficiency of the Gr-CdS nanocomposite was almost three times higher than that of pure CdS NPs.

Carbon black as an outstanding and affordable nanomaterial for electrochemical (bio)sensor design

Advances in cutting-edge technologies including nanotechnology, microfluidics, electronic engineering, and material science have boosted a new era in the design of robust and sensitive biosensors. In recent years, carbon black has been re-discovered in the design of electrochemical (bio)sensors thanks to its interesting electroanalytical properties, absence of treatment requirement, cost-effectiveness (c.a. 1 €/Kg), and easiness in the preparation of stable dispersions. Herein, we present an overview of the literature on carbon black-based electrochemical (bio)sensors, highlighting current trends and possible challenges to this rapidly developing area, with a special focus on the fabrication of carbon black-based electrodes in the realisation of sensors and biosensors (e.g. enzymatic, immunosensors, and DNA-based).

Recent Progress of Biomarker Detection Sensors

Early cancer diagnosis and treatment are crucial research fields of human health. One method that has proven efficient is biomarker detection which can provide real-time and accurate biological information for early diagnosis. This review presents several biomarker sensors based on electrochemistry, surface plasmon resonance (SPR), nanowires, other nanostructures, and, most recently, metamaterials which have also shown their mechanisms and prospects in application in recent years. Compared with previous reviews, electrochemistry-based biomarker sensors have been classified into three strategies according to their optimizing methods in this review. This makes it more convenient for researchers to find a specific fabrication method to improve the performance of their sensors. Besides that, as microfabrication technologies have improved and novel materials are explored, some novel biomarker sensors-such as nanowire-based and metamaterial-based biomarker sensors-have also been investigated and summarized in this review, which can exhibit ultrahigh resolution, sensitivity, and limit of detection (LoD) in a more complex detection environment. The purpose of this review is to understand the present by reviewing the past. Researchers can break through bottlenecks of existing biomarker sensors by reviewing previous works and finally meet the various complex detection needs for the early diagnosis of human cancer.

Rapid, quantitative and ultra-sensitive detection of cancer biomarker by a SERRS-based lateral flow immunoassay using bovine serum albumin coated Au nanorods

A rapid, sensitive, and stable SERRS-LFIA strip was developed for AFP detection using BSA-coated AuNRs as SERRS nanotags.