Nickel complexes as molecular catalysts for water splitting and CO2 reduction

Electrocatalytic H2 Generation from Water Relying on Cooperative Ligand Electron Transfer in "PN3 P" Pincer-Supported NiII Complexes

Water is the most sustainable source for H₂ production, and the efficient electrocatalytic production of H₂ from mixed water/acetonitrile solutions by using two new air-stable nickel(II) pincer complexes, [Ni(κ³ -2,6-{Ph₂ PNR}₂ (NC₅ H₃ )Br₂ ] (R=H I, Me II) is reported. Hydrogen generation from H₂ O/CH₃ CN solutions is initiated at -2 V against Fc^+/0 , and bulk electrocatalysis studies showed that the catalyst functions with an excellent Faradaic efficiency and a turnover frequency of 160 s^-1 . A DFT computational investigation of the reduction behavior of I and II revealed a correlation of H₂ formation with charge donation from electrons originating in a reduced ligand-localized orbital. As a result, these catalysts are proposed to proceed by a novel mechanism involving electron/proton transfer between a Ni^0I species bonded to an anionic PN³ P ligand ("L^- /Ni^0I ") and a Ni^I -hydride ("Ni-H"). Furthermore, these catalysts are able to reduce phenol and acetic acid, more active proton sources, at lower potentials that correlate with the substrate pK_a .

Rapid electron transfer via dynamic coordinative interaction boosts quantum efficiency for photocatalytic CO2 reduction

The fulfillment of a high quantum efficiency for photocatalytic CO₂ reduction presents a key challenge, which can be overcome by developing strategies for dynamic attachment between photosensitizer and catalyst. In this context, we exploit the use of coordinate bond to connect a pyridine-appended iridium photosensitizer and molecular catalysts for CO₂ reduction, which is systematically demonstrated by ¹H nuclear magnetic resonance titration, theoretical calculations, and spectroscopic measurements. The mechanistic investigations reveal that the coordinative interaction between the photosensitizer and an unmodified cobalt phthalocyanine significantly accelerates the electron transfer and thus realizes a remarkable quantum efficiency of 10.2% ± 0.5% at 450 nm for photocatalytic CO₂-to-CO conversion with a turn-over number of 391 ± 7 and nearly complete selectivity, over 4 times higher than a comparative system with no additional interaction (2.4%±0.2%). Moreover, the decoration of electron-donating amino groups on cobalt phthalocyanine can optimize the quantum efficiency up to 27.9% ± 0.8% at 425 nm, which is more attributable to the enhanced coordinative interaction rather than the intrinsic activity. The control experiments demonstrate that the dynamic feature of coordinative interaction is important to prevent the coordination occupancy of labile sites, also enabling the wide applicability on diverse non-noble-metal catalysts.

Positioning photosensitizer and catalyst complexes in photocatalytic systems is a promising method to direct desired electron transfers. Here, authors employ a dynamic coordinative interaction between molecular components to improve CO₂ photoreduction to CO with a high quantum efficiency of 27.9%.

A Di-Copper-Peptoid in a Noninnocent Borate Buffer as a Fast Electrocatalyst for Homogeneous Water Oxidation with Low Overpotential

Water electrolysis is a promising approach toward low-cost renewable fuels; however, the high overpotential and slow kinetics limit its applicability. Studies suggest that either dinuclear copper (Cu) centers or the use of borate buffer can lead to efficient catalysis. We previously demonstrated the ability of peptoids-N-substituted glycine oligomers-to stabilize high-oxidation-state metal ions and to form self-assembled di-copper-peptoid complexes. Capitalizing on these features herein we report on a unique Cu-peptoid duplex, Cu₂(BEE)₂, that is a fast and stable homogeneous electrocatalyst for water oxidation in borate buffer at pH 9.35, with low overpotential and a high turnover frequency of 129 s^-1 (peak current measurements) or 5503 s^-1 (FOWA); both are the highest reported for Cu-based water electrocatalysts to date. BEE is a peptoid trimer having one 2,2'-bipyridine ligand and two ethanolic groups, easily synthesized on solid support. Cu₂(BEE)₂ was characterized by single-crystal X-ray diffraction and various spectroscopic and electrochemical techniques, demonstrating its ability to maintain stable in four cycles of controlled potential electrolysis, leading to a high overall turnover number of 51.4 in a total of 2 h. Interestingly, the catalytic activity of control complexes having only one ethanolic side chain is 2 orders of magnitude lower than that of Cu₂(BEE)₂. On the basis of this comparison and on mechanistic studies, we propose that the ethanolic side chains and the borate buffer have significant roles in the high stability and catalytic activity of Cu₂(BEE)₂; the -OH groups facilitate protons transfer, while the borate species enables oxygen transfer toward O-O bond formation.

Ni Oxidation State and Ligand Saturation Impact on the Capability of Octaazamacrocyclic Complexes to Bind and Reduce CO2

Two 15-membered octaazamacrocyclic nickel(II) complexes are investigated by theoretical methods to shed light on their affinity forwards binding and reducing CO2. In the first complex 1[NiIIL]0, the octaazamacrocyclic ligand is grossly unsaturated (π-conjugated), while in the second 1[NiIILH]2+ one, the macrocycle is saturated with hydrogens. One and two-electron reductions are described using Mulliken population analysis, quantum theory of atoms in molecules, localized orbitals, and domain averaged fermi holes, including the characterization of the Ni-CCO2 bond and the oxidation state of the central Ni atom. It was found that in the [NiLH] complex, the central atom is reduced to Ni0 and/or NiI and is thus able to bind CO2 via a single σ bond. In addition, the two-electron reduced 3[NiL]2- species also shows an affinity forwards CO2.

Ruthenium-Benzothiadiazole Building Block Derived Dynamic Heterometallic Ru-Ag Coordination Polymer and Its Enhanced Water-Splitting Feature

This article deals with the development of the unprecedented redox-mediated heterometallic coordination polymer {[Ru^III(acac)₂(μ-bis-η¹-N,η¹-N-BTD)₂Ag^I(ClO₄)]ClO₄}_n (3) via the oxidation of the monomeric building block cis-[Ru^II(acac)₂(η¹-N-BTD)₂] (1) by AgClO₄ (BTD = exodentate 2,1,3-benzothiadiazole, acac = acetylacetonate). Monomeric cis-[Ru^II(acac)₂(η¹-N-BTD)₂] (1) and [Ru^II(acac)₂(η¹-N-BTD)(CH₃CN)] (2) were simultaneously obtained from the electron-deficient BTD heterocycle and the electron-rich metal precursor Ru^II(acac)₂(CH₃CN)₂ in refluxing CH₃CN. Molecular identities of 1-3 were authenticated by their single-crystal X-ray structures as well as by solution spectral features. These results also reflected the elusive trigonal-planar geometry of the Ag ion in Ru-Ag-derived polymeric 3. Ru(III) (S = 1/2)-derived 3 displayed metal-based anisotropic EPR with ⟨g⟩/Δg = 2.12/0.56 and paramagnetically shifted ¹H NMR. Spectroelectrochemistry in combination with DFT/TD-DFT calculations of 1ⁿ and 2ⁿ (n = 1+, 0, 1-) determined a metal-based (Ru^II/Ru^III) oxidation and BTD-based reduction (BTD/BTD^•-). The drastic decrease in the emission intensity and quantum yield but insignificant change in the lifetime of 3 with respect to 1 could be addressed in terms of static quenching and/or a paramagnetism-induced phenomenon. A homogeneously dispersed dumbbell-shaped morphology and the particle diameter of 3 were established by microscopic (TEM-EDX/SEM) and DLS analysis, respectively. Moreover, the dynamic nature of polymeric 3 was highlighted by its degradation to the η¹-N-BTD coordinated monomeric fragment 1, which could also be followed spectrophotometrically in polar protic EtOH. Interestingly, both monomeric 1 and polymeric 3 exhibited efficient electrocatalytic activity toward water oxidation processes (OER, HER) on immobilization on an FTO support, which also divulged the better intrinsic water oxidation activity of 3 in comparison to 1.

Self-Assembled Nickel-4 Supramolecular Squares and Assays for HER Electrocatalysts Derived Therefrom

Solid-state structures find a self-assembled tetrameric nickel cage with carboxylate linkages, [Ni(N₂S'O)I(CH₃CN)]₄ ([Ni-I]₄⁰), resulting from sulfur acetylation by sodium iodoacetate of an [NiN₂S]₂²⁺ dimer in acetonitrile. Various synthetic routes to the tetramer, best described from XRD as a molecular square, were discovered to generate the hexacoordinate nickel units ligated by N₂S_thioether, iodide, and two carboxylate oxygens, one of which is the bridge from the adjacent nickel unit in [Ni-I]₄⁰. Removal of the four iodides by silver ion precipitation yields an analogous species but with an additional vacant coordination site, [Ni-Solv]⁺, a cation but with coordinated solvent molecules. This also recrystallizes as the tetramer [Ni-Solv]₄⁴⁺. In solution, dissociation into the (presumed) monomer occurs, with coordinating solvents occupying the vacant site [Ni(N₂S'O)I(solv)]⁰, ([Ni-I]⁰). Hydrodynamic radii determined from ¹H DOSY NMR data suggest that monomeric units are present as well in CD₂Cl₂. Evans method magnetism values are consistent with triplet spin states in polar solvents; however, in CD₂Cl₂ solutions no paramagnetism is evident. The abilities of [Ni-I]₄⁰ and [Ni-Solv]₄⁴⁺ to serve as sources of electrocatalysts, or precatalysts, for the hydrogen evolution reaction (HER) were explored. Cyclic voltammetry responses and bulk coulometry with gas chromatographic analysis demonstrated that a stronger acid, trifluoroacetic acid, as a proton source resulted in H₂ production from both electroprecatalysts; however, electrocatalysis developed primarily from uncharacterized deposits on the electrode. With acetic acid as a proton source, the major contribution to the HER is from homogeneous electrocatalysis. Overpotentials of 490 mV were obtained for both the solution-phase [Ni-I]⁰ and [Ni-Solv]⁺. While the electrocatalyst derived from [Ni-Solv]⁺ has a substantially higher TOF (102 s^-1) than [Ni-I]⁰ (19 s^-1), it has a shorter catalytically active lifespan (4 h) in comparison to [Ni-I]⁰ (>18 h).

Oxo-functionalised mesoionic NHC nickel complexes for selective electrocatalytic reduction of CO2 to formate

Strategies for the conversion of CO2 to valuable products are paramount for reducing the environmental risks associated with high levels of this greenhouse gas and offer unique opportunities for transforming waste into useful products. While catalysts based on nickel as an Earth-abundant metal for the sustainable reduction of CO2 are known, the vast majority produce predominantly CO as a product. Here, efficient and selective CO2 reduction to formate as a synthetically valuable product has been accomplished with novel nickel complexes containing a tailored C,O-bidentate chelating mesoionic carbene ligand. These nickel(ii) complexes are easily accessible and show excellent catalytic activity for electrochemical H+ reduction to H2 (from HOAc in MeCN), and CO2 reduction (from CO2-saturated MeOH/MeCN solution) with high faradaic efficiency to yield formate exclusively as an industrially and synthetically valuable product from CO2. The most active catalyst precursor features the 4,6-di-tert-butyl substituted phenolate triazolylidene ligand, tolerates different proton donors including water, and reaches an unprecedented faradaic efficiency of 83% for formate production, constituting the most active and selective Ni-based system known to date for converting CO2 into formate as an important commodity chemical.

Na3[Ru2(µ-CO3)4] as a Homogeneous Catalyst for Water Oxidation; HCO3− as a Co-Catalyst

In neutral medium (pH 7.0) [RuIIIRuII(µ-CO3)4(OH)]4− undergoes one electron oxidation to form [RuIIIRuIII(µ-CO3)4(OH)2]4− at an E1/2 of 0.85 V vs. NHE followed by electro-catalytic water oxidation at a potential ≥1.5 V. When the same electrochemical measurements are performed in bicarbonate medium (pH 8.3), the complex first undergoes one electron oxidation at an Epa of 0.86 V to form [RuIIIRuIII(µ-CO3)4(OH)2]4−. This complex further undergoes two step one electron oxidations to form RuIVRuIII and RuIVRuIV species at potentials (Epa) 1.18 and 1.35 V, respectively. The RuIVRuIII and RuIVRuIV species in bicarbonate solutions are [RuIVRuIII(µ-CO3)4(OH)(CO3)]4− and [RuIVRuIV(µ-CO3)4(O)(CO3)]4− based on density functional theory (DFT) calculations. The formation of HCO4− in the course of the oxidation has been demonstrated by DFT. The catalyst acts as homogeneous water oxidation catalyst, and after long term chronoamperometry, the absorption spectra does not change significantly. Each step has been found to follow a proton coupled electron transfer process (PCET) as obtained from the pH dependent studies. The catalytic current is found to follow linear relation with the concentration of the catalyst and bicarbonate. Thus, bicarbonate is involved in the catalytic process that is also evident from the generation of higher oxidation peaks in cyclic voltammetry. The detailed mechanism has been derived by DFT. A catalyst with no organic ligands has the advantage of long-time stability.

Electrocatalytic oxidation of water using self-assembled copper(ii) tetraaza macrocyclic complexes on a 4-(pyridine-4′-amido)benzene grafted gold electrode

Gold surface anchored copper(ii)tetraaza macrocyclic complex showed an excellent electrocatalytic activity towards water oxidation with an overpotential of 284 mV at a current density of 1.31 mA cm⁻² and a Tafel slope of 48 mV decade⁻¹ in neutral pH.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Efficient and steady production of 1 : 2 syngas (CO/H2) by simultaneous electrochemical reduction of CO2 and H2O

A guest–host pyrolysis strategy is used to synthesize a Co–C/N_x-based single-site catalyst, featuring excellent electrocatalytic performance for syngas production by electrochemical reduction of CO₂ and H₂O (FE nearly 100%, formation rate 1.08 mol g⁻¹ h⁻¹ at 1.0 V vs. RHE).

Highly Efficient and Selective Visible-Light Driven CO2 Reduction by Two Co-Based Catalysts in Aqueous Solution

Photocatalytic CO₂ reduction has been considered as a promising approach to solve energy and environmental problems. Nevertheless, developing inexpensive photocatalysts with high efficiency and selectivity remains a big challenge. In this study, two Co-based complexes [Co₂(L¹)Cl₂] (1-Co) and [Co(L²)Cl] (2-Co) were synthesized by treating two DPA-based (DPA: dipicolylamine) ligands with Co²⁺, respectively. Under visible-light irradiation, the performance of 1-Co as a homogeneous photocatalyst for CO₂ reduction in aqueous media has been explored by using [Ru(phen)₃]²⁺ as a photosensitizer, and triethylolamine (TEOA) as a sacrificial reductant. 1-Co shows high photocatalytic activity for CO₂-to-CO conversion, corresponding to the high TON_CO of 2600 and TOF_CO of 260 h^-1 (TON_CO = turnover number for CO; TOF_CO = turnover frequency for CO). High selectivity of 97% for CO formation is also achieved. The control experiments catalyzed by 2-Co demonstrated that two Co(II) centers in 1-Co may operate independently and activate one CO₂ molecule each. Furthermore, the proposed mechanism of 1-Co for photocatalytic CO₂ reduction has been investigated via electrochemical analysis, a series of quenching experiments, and density functional theory calculations.

Immobilization of molecular catalysts for artificial photosynthesis

Artificial photosynthesis offers a way of producing fuels or high-value chemicals using a limitless energy source of sunlight and abundant resources such as water, CO2, and/or O2. Inspired by the strategies in natural photosynthesis, researchers have developed a number of homogeneous molecular systems for photocatalytic, photoelectrocatalytic, and electrocatalytic artificial photosynthesis. However, their photochemical instability in homogeneous solution are hurdles for scaled application in real life. Immobilization of molecular catalysts in solid supports support provides a fine blueprint to tackle this issue. This review highlights the recent developments in (i) techniques for immobilizing molecular catalysts in solid supports and (ii) catalytic water splitting, CO2 reduction, and O2 reduction with the support-immobilized molecular catalysts. Remaining challenges for molecular catalyst-based devices for artificial photosynthesis are discussed in the end of this review.

Potential- and Buffer-Dependent Catalyst Decomposition during Nickel-Based Water Oxidation Catalysis

The production of hydrogen by water electrolysis benefits from the development of water oxidation catalysts. This development process can be aided by the postulation of design rules for catalytic systems. The analysis of the reactivity of molecular complexes can be complicated by their decomposition under catalytic conditions into nanoparticles that may also be active. Such a misinterpretation can lead to incorrect design rules. In this study, the nickel-based water oxidation catalyst [NiII (meso-L)](ClO4 )2 , which was previously thought to operate as a molecular catalyst, is found to decompose to form a NiOx layer in a pH 7.0 phosphate buffer under prolonged catalytic conditions, as indicated by controlled potential electrolysis, electrochemical quartz crystal microbalance, and X-ray photoelectron spectroscopy measurements. Interestingly, the formed NiOx layer desorbs from the surface of the electrode under less anodic potentials. Therefore, no nickel species can be detected on the electrode after electrolysis. Catalyst decomposition is strongly dependent on the pH and buffer, as there is no indication of NiOx layer formation at pH 6.5 in phosphate buffer nor in a pH 7.0 acetate buffer. Under these conditions, the activity stems from a molecular species, but currents are much lower. This study demonstrates the importance of in situ characterization methods for catalyst decomposition and metal oxide layer formation, and previously proposed design elements for nickel-based catalysts need to be revised.

Integrating single Ni sites into biomimetic networks of covalent organic frameworks for selective photoreduction of CO2

Selective photoreduction of CO2 into a given product is a great challenge but desirable. Inspired by natural photosynthesis occurring in hierarchical networks over non-precious molecular metal catalysts, we demonstrate an integration of single Ni sites into the hexagonal pores of polyimide covalent organic frameworks (PI-COFs) for selective photoreduction of CO2 to CO. The single Ni sites in the hexagonal pores of the COFs serve as active sites for CO2 activation and conversion, while the PI-COFs not only act as a photosensitizer to generate charge carriers but also exert a promoting effect on the selectivity. The optimized PI-COF with a triazine ring exhibits excellent activity and selectivity. A possible intra- and inter-molecular charge-transfer mechanism was proposed, in which the photogenerated electrons in PI-COFs are efficiently separated from the central ring to the diimide linkage, and then transferred to the single Ni active sites, as evidenced by theoretical calculations.

Improving photosensitization for photochemical CO2-to-CO conversion

Inspired by nature, improving photosensitization represents a vital direction for the development of artificial photosynthesis. The sensitization ability of photosensitizers (PSs) reflects in their electron-transfer ability, which highly depends on their excited-state lifetime and redox potential. Herein, for the first time, we put forward a facile strategy to improve sensitizing ability via finely tuning the excited state of Ru(II)-PSs (Ru-1–Ru-4) for efficient CO₂ reduction. Remarkably, [Ru(Phen)₂(3-pyrenylPhen)]²⁺ (Ru-3) exhibits the best sensitizing ability among Ru-1–Ru-4, over 17 times higher than that of typical Ru(Phen)₃²⁺. It can efficiently sensitize a dinuclear cobalt catalyst for CO₂-to-CO conversion with a maximum turnover number of 66 480. Systematic investigations demonstrate that its long-lived excited state and suitable redox driving force greatly contributed to this superior sensitizing ability. This work provides a new insight into dramatically boosting photocatalytic CO₂ reduction via improving photosensitization.

Liquefied Sunshine: Transforming Renewables into Fertilizers and Energy Carriers with Electromaterials

It has become apparent that renewable energy sources are plentiful in many, often remote, parts of the world, such that storing and transporting that energy has become the key challenge. For long-distance transportation by pipeline and bulk tanker, a liquid form of energy carrier is ideal, focusing attention on liquid hydrogen and ammonia. Development of high-activity and selectivity electrocatalyst materials to produce these energy carriers by reductive electrochemistry has therefore become an important area of research. Here, recent developments and challenges in the field of electrocatalytic materials for these processes are discussed, including the hydrogen evolution reaction (HER), the oxygen evolution reaction (OER), and the nitrogen reduction reaction (NRR). Some of the mis-steps currently plaguing the nitrogen reduction to ammonia field are highlighted. The rapidly growing roles that in situ/operando and quantum chemical studies can play in new electromaterials discovery are also surveyed.

Tracking Mechanistic Pathway of Photocatalytic CO2 Reaction at Ni Sites Using Operando, Time-Resolved Spectroscopy

Harvesting solar energy for catalytic conversion of CO₂ into valuable chemical fuels/feedstocks is an attractive yet challenging strategy to realize a sustainable carbon-cycle utilization. Homogeneous catalysts typically exhibit higher activity and selectivity as compared with heterogeneous counterparts, benefiting from their atomically dispersed catalytic sites and versatile coordination structures. However, it is still a "black box" how the coordination and electronic structures of catalysts dynamically evolve during the reaction, forming the bottleneck for understanding their reaction pathways. Herein, we demonstrate to track the mechanistic pathway of photocatalytic CO₂ reduction using a terpyridine nickel(II) complex as a catalyst model. Integrated with a typical homogeneous photosensitizer, the catalytic system offers a high selectivity of 99% for CO₂-to-CO conversion with turnover number and turnover frequency as high as 2.36 × 10⁷ and 385.6 s^-1, respectively. We employ operando and time-resolved X-ray absorption spectroscopy, in combination with other in situ spectroscopic techniques and theoretical computations, to track the intermediate species of Ni catalyst in the photocatalytic CO₂ reduction reaction for the first time. Taken together with the charge dynamics resolved by optical transient absorption spectroscopy, the investigation elucidates the full mechanistic reaction pathway including some key factors that have been often overlooked. This work opens the "black box" for CO₂ reduction in the system of homogeneous catalysts and provides key information for developing efficient catalysts toward artificial photosynthesis.

Dicopper(ii) tetrapyridyl complexes incorporated with ancillary ligands for effective water oxidation

Water oxidation catalysis of dicopper(ii) tetrapyridyl complexes under alkaline conditions was improved by diamine ligands.

Molecular quaterpyridine-based metal complexes for small molecule activation: water splitting and CO2 reduction

This tutorial describes recent developments in the use of metal quaterpyridine complexes as electrocatalysts and photocatalysts for water splitting and CO₂ reduction.

Visible-light-driven hydrogen evolution using a polyoxometalate-based copper molecular catalyst

[Cu₅(OH)₄(H₂O)₂(A-α-SiW₉O₃₃)₂]¹⁰⁻ (1) was tested as a molecular catalyst for visible-light-driven H₂ evolution and exhibited a high TON of 718.9. Many stability studies showed that 1 could maintain its structure intact during the catalytic process.

Temperature-induced structural transformations accompanied by changes in magnetic properties of two copper coordination polymers

Two ferromagnetic copper compounds have been synthesized under different temperature, which represented the rare example of structural transformations resulting from the coordination modes of organic ligands supported by magnetic results.

Relative stabilities of M/NHC complexes (M = Ni, Pd, Pt) against R-NHC, X-NHC and X-X couplings in M(0)/M(ii) and M(ii)/M(iv) catalytic cycles: a theoretical study

The complexes of Ni, Pd, and Pt with N-heterocyclic carbenes (NHCs) catalyze numerous organic reactions via proposed typical M⁰/M^II catalytic cycles comprising intermediates with the metal center in (0) and (II) oxidation states. In addition, M^II/M^IV catalytic cycles have been proposed for a number of reactions. The catalytic intermediates in both cycles can suffer decomposition via R-NHC coupling and the side reductive elimination of the NHC ligand and R groups (R = alkyl, aryl, etc.) to give [NHC-R]⁺ cations. In this study, the relative stabilities of (NHC)M^II(R)(X)L and (NHC)M^IV(R)(X)₃L intermediates (X = Cl, Br, I; L = NHC, pyridine) against R-NHC coupling and other decomposition pathways via reductive elimination reactions were evaluated theoretically. The study revealed that the R-NHC coupling represents the most favorable decomposition pathway for both types of intermediates (M^II and M^IV), while it is thermodynamically and kinetically more facile for the M^IV complexes. The relative effects of the metal M (Ni, Pd, Pt) and ligands L and X on the R-NHC coupling for the M^IV complexes were significantly stronger than that for the M^II complexes. In particular, for the (NHC)₂M^IV(Ph)(Br)₃ complexes, Ph-NHC coupling was facilitated dramatically from Pt (ΔG = -36.9 kcal mol^-1, ΔG^≠ = 37.5 kcal mol^-1) to Pd (ΔG = -61.5 kcal mol^-1, ΔG^≠ = 18.3 kcal mol^-1) and Ni (ΔG = -80.2 kcal mol^-1, ΔG^≠ = 4.7 kcal mol^-1). For the M^II oxidation state of the metal, the bis-NHC complexes (L = NHC) were slightly more kinetically and thermodynamically stable against R-NHC coupling than the mono-NHC complexes (L = pyridine). An inverse relation was observed for the M^IV oxidation state of the metal as the (NHC)₂M^IV(R)(X)₃ complexes were kinetically (4.3-15.9 kcal mol^-1) and thermodynamically (8.0-23.2 kcal mol^-1) significantly less stable than the (NHC)M^IV(R)(X)₃L (L = pyridine) complexes. For the Ni^IV and Pd^IV complexes, additional decomposition pathways via the reductive elimination of the NHC and X ligands to give the [NHC-X]⁺ cation (X-NHC coupling) or reductive elimination of the X-X molecule were found to be thermodynamically and kinetically probable. Overall, the obtained results demonstrate significant instability of regular Ni/NHC and Pd/NHC complexes (for example, not additionally stabilized by chelation) and high probability to initiate "NHC-free" catalysis in the reactions comprising M^IV intermediates.