Optical single-channel recording by imaging Ca2+ flux through individual ion channels: theoretical considerations and limits to resolution

Magnetic fluid hyperthermia: focus on superparamagnetic iron oxide nanoparticles

Due to their unique magnetic properties, excellent biocompatibility as well as multi-purpose biomedical potential (e.g., applications in cancer therapy and general drug delivery), superparamagnetic iron oxide nanoparticles (SPIONs) are attracting increasing attention in both pharmaceutical and industrial communities. The precise control of the physiochemical properties of these magnetic systems is crucial for hyperthermia applications, as the induced heat is highly dependent on these properties. In this review, the limitations and recent advances in the development of superparamagnetic iron oxide nanoparticles for hyperthermia are presented.

Stochastic amplification of calcium-activated potassium currents in Ca2+ microdomains

Small conductance (SK) calcium-activated potassium channels are found in many tissues throughout the body and open in response to elevations in intracellular calcium. In hippocampal neurons, SK channels are spatially co-localized with L-Type calcium channels. Due to the restriction of calcium transients into microdomains, only a limited number of L-Type Ca(2+) channels can activate SK and, thus, stochastic gating becomes relevant. Using a stochastic model with calcium microdomains, we predict that intracellular Ca(2+) fluctuations resulting from Ca(2+) channel gating can increase SK2 subthreshold activity by 1-2 orders of magnitude. This effectively reduces the value of the Hill coefficient. To explain the underlying mechanism, we show how short, high-amplitude calcium pulses associated with stochastic gating of calcium channels are much more effective at activating SK2 channels than the steady calcium signal produced by a deterministic simulation. This stochastic amplification results from two factors: first, a supralinear rise in the SK2 channel's steady-state activation curve at low calcium levels and, second, a momentary reduction in the channel's time constant during the calcium pulse, causing the channel to approach its steady-state activation value much faster than it decays. Stochastic amplification can potentially explain subthreshold SK2 activation in unified models of both sub- and suprathreshold regimes. Furthermore, we expect it to be a general phenomenon relevant to many proteins that are activated nonlinearly by stochastic ligand release.

Inositol (1,4,5)-trisphosphate receptor microarchitecture shapes Ca2+ puff kinetics

Inositol (1,4,5)-trisphosphate receptors (IP(3)Rs) release intracellular Ca(2+) as localized Ca(2+) signals (Ca(2+) puffs) that represent the activity of small numbers of clustered IP(3)Rs spaced throughout the endoplasmic reticulum. Although much emphasis has been placed on estimating the number of active Ca(2+) release channels supporting Ca(2+) puffs, less attention has been placed on understanding the role of cluster microarchitecture. This is important as recent data underscores the dynamic nature of IP(3)R transitions between heterogeneous cellular architectures and the differential behavior of IP(3)Rs socialized into clusters. Here, we applied a high-resolution model incorporating stochastically gating IP(3)Rs within a three-dimensional cytoplasmic space to demonstrate: 1), Ca(2+) puffs are supported by a broad range of clustered IP(3)R microarchitectures; 2), cluster ultrastructure shapes Ca(2+) puff characteristics; and 3), loosely corralled IP(3)R clusters (>200 nm interchannel separation) fail to coordinate Ca(2+) puffs, owing to inefficient triggering and impaired coupling due to reduced Ca(2+)-induced Ca(2+) release microwave velocity (<10 nm/s) throughout the channel array. Dynamic microarchitectural considerations may therefore influence Ca(2+) puff occurrence/properties in intact cells, contrasting with a more minimal role for channel number over the same simulated conditions in shaping local Ca(2+) dynamics.

Superparamagnetic iron oxide nanoparticles: promises for diagnosis and treatment of multiple sclerosis

Smart superparamagnetic iron oxide nanoparticles (SPIONs) are the most promising candidate for theragnosis (i.e., diagnosis and treatment) of multiple sclerosis. A deep understanding of the dynamics of the in vivo neuropathology of multiple sclerosis can be achieved by improving the efficiency of various medical techniques (e.g., positron emission tomography and magnetic resonance imaging) using multimodal SPIONs. In this Review, recent advances and challenges in the development of smart SPIONs for theragnostic applications are comprehensively described. In addition, critical outlines of emerging developments are provided from the points of view of both clinicians and nanotechnologists.

Superresolution localization of single functional IP3R channels utilizing Ca2+ flux as a readout

The subcellular localization of membrane Ca2+ channels is crucial for their functioning, but is difficult to study because channels may be distributed more closely than the resolution of conventional microscopy is able to detect. We describe a technique, stochastic channel Ca2+ nanoscale resolution (SCCaNR), employing Ca2+-sensitive fluorescent dyes to localize stochastic openings and closings of single Ca2+-permeable channels within <50 nm, and apply it to examine the clustered arrangement of inositol trisphosphate receptor (IP3R) channels underlying local Ca2+ puffs. Fluorescence signals (blips) arising from single functional IP3Rs are almost immotile (diffusion coefficient<0.003 microm2 s(-1)), as are puff sites over prolonged periods, suggesting that the architecture of this signaling system is stable and not subject to rapid, dynamic rearrangement. However, rapid stepwise changes in centroid position of fluorescence are evident within the durations of individual puffs. These apparent movements likely result from asynchronous gating of IP3Rs distributed within clusters that have an overall diameter of approximately 400 nm, indicating that the nanoscale architecture of IP3R clusters is important in shaping local Ca2+ signals. We anticipate that SCCaNR will complement superresolution techniques such as PALM and STORM for studies of Ca2+ channels as it obviates the need for photoswitchable labels and provides functional as well as spatial information.

Cellular and molecular Ca2+ microdomains in olfactory cilia support low signaling amplification of odor transduction

Signal transduction depends critically on the spatial localization of protein constituents. A key question in odor transduction is whether chemotransduction proteins organize into discrete molecular complexes throughout olfactory cilia or distribute homogeneously along the ciliary membrane. Our recordings of Ca(2+) changes in individual cilia with unprecedented spatial and temporal resolution, by the use of two-photon microscopy, provide solid evidence for Ca(2+) microdomains (transducisomes). Dissociated frog olfactory neurons were preloaded with caged-cAMP and fluo-4 acetoxymethyl ester probe Ca(2+) indicator. Ca(2+) influx through cyclic nucleotide-gated (CNG) channels was evoked by uniformly photoreleasing cAMP, while ciliary Ca(2+) was measured. Discrete fluorescence events were clearly resolved. Events were missing in the absence of external Ca(2+) , consistent with the absence of internal Ca(2+) sources. Fluorescence events at individual microdomains resembled single-CNG channel fluctuations in shape, mean duration and kinetics, indicating that transducisomes typically contain one to three CNG channels. Inhibiting the Na(+) /Ca(2+) exchanger or the Ca(2+) -ATPase prolonged the decay of evoked intraciliary Ca(2+) transients, supporting the participation of both transporters in ciliary Ca(2+) clearance, and suggesting that both molecules localize close to the CNG channel. Chemosensory transducisomes provide a physical basis for the low amplification and for the linearity of odor responses at low odor concentrations.

Recording single-channel activity of inositol trisphosphate receptors in intact cells with a microscope, not a patch clamp

Optical single-channel recording is a novel tool for the study of individual Ca2+-permeable channels within intact cells under minimally perturbed physiological conditions. As applied to the functioning and spatial organization of IP3Rs, this approach complements our existing knowledge, which derives largely from reduced systems - such as reconstitution into lipid bilayers and patch clamping of IP3Rs on the membrane of excised nuclei - where the spatial arrangement and interactions among IP3Rs via CICR are disrupted. The ability to image the activity of single IP3R channels with millisecond resolution together with localization of their positions with a precision of a few tens of nanometers both raises several intriguing questions and holds promise of answers. In particular, what mechanism underlies the anchoring of puffs and blips to static locations; why do these Ca2+ release events appear to involve only a very small fraction of the IP3Rs within a cell; and how can we reconcile the relative immotility of functional IP3Rs with numerous studies reporting free diffusion of IP3R protein in the ER membrane?

Quantifying calcium fluxes underlying calcium puffs in Xenopus laevis oocytes

We determine the calcium fluxes through inositol 1,4,5-trisphosphate receptor/channels underlying calcium puffs of Xenopus laevis oocytes using a simplified version of the algorithm of Ventura et al. An analysis of 130 puffs obtained with Fluo-4 indicates that Ca2+ release comes from a region of width approximately 450 nm, that the release duration is peaked around 18 s and that the underlying Ca2+ currents range between 0.12 and 0.95 pA. All these parameters are independent of IP(3) concentration. We explore what distributions of channels that open during a puff, N(p), and what relations between current and number of open channels, I(N(p)), are compatible with our findings and with the distribution of puff-to-trigger amplitude ratio reported in Rose et al. To this end, we use simple "mean field" models in which all channels open and close simultaneously. We find that the variability among clusters plays an important role in shaping the observed puff amplitude distribution and that a model for which I(N(p)) approximately N(p) for small N(p) and I(N(p)) approximately N(p)(1/alpha) (alpha > 1) for large N(p), provides the best agreement. Simulations of more detailed models in which channels open and close stochastically show that this nonlinear behavior can be attributed to the limited time resolution of the observations and to the averaging procedure that is implicit in the mean-field models. These conclusions are also compatible with observations of approximately 400 puffs obtained using the dye Oregon green.

Ca(2+) puffs originate from preestablished stable clusters of inositol trisphosphate receptors

Intracellular calcium ion (Ca(2+)) signaling crucially depends on the clustered organization of inositol trisphosphate receptors (IP(3)Rs) in the endoplasmic reticulum (ER) membrane. These ligand-gated ion channels liberate Ca(2+) to generate local signals known as Ca(2+) puffs. We tested the hypothesis that IP(3) itself elicits rapid clustering of IP(3)Rs by using flash photolysis of caged IP(3) in conjunction with high-resolution Ca(2+) imaging to monitor the activity and localization of individual IP(3)Rs within intact mammalian cells. Our results indicate that Ca(2+) puffs arising with latencies as short as 100 to 200 ms after photorelease of IP(3) already involve at least four IP(3)R channels, and that this number does not subsequently grow. Moreover, single active IP(3)Rs show limited mobility, and stochastic simulations suggest that aggregation of IP(3)Rs at puff sites by a diffusional trapping mechanism would require many seconds. We thus conclude that puff sites represent preestablished, stable clusters of IP(3)Rs and that functional IP(3)Rs are not readily diffusible within the ER membrane.

Molecular and biophysical mechanisms of Ca2+ sparklets in smooth muscle

In this article, we review the biophysical basis and functional implications of a novel Ca(2+) signal (called "Ca(2+) sparklets") produced by Ca(2+) influx via L-type Ca(2+) channels (LTCCs) in smooth muscle. Ca(2+) sparklet activity is bimodal. In low activity mode, Ca(2+) sparklets are produced by random, brief openings of solitary LTCCs. In contrast, small clusters of LTCCs can function in a high activity mode that creates sites of continual Ca(2+) influx called "persistent Ca(2+) sparklets". Low activity and persistent Ca(2+) sparklets contribute to Ca(2+) influx in arterial, colonic, and venous smooth muscle. Targeting of PKCalpha by the scaffolding protein AKAP150 to specific sarcolemmal domains is required for the activation of persistent Ca(2+) sparklets. Calcineurin, which is also associated with AKAP150, opposes the actions of PKCalpha on Ca(2+) sparklets. At hyperpolarized potentials, Ca(2+) sparklet activity is low and hence does not contribute to global [Ca(2+)](i). Membrane depolarization increases low and persistent Ca(2+) sparklet activity, thereby increasing local and global [Ca(2+)](i). Ca(2+) sparklet activity is increased in arterial myocytes during hypertension, thus increasing Ca(2+) influx and activating the transcription factor NFATc3. We discuss a model for subcellular variations in Ca(2+) sparklet activity and their role in the regulation of excitation-contraction coupling and excitation-transcription coupling in smooth muscle.

Fluorescence combined with excised patch: measuring calcium currents in plant cation channels

Combined application of the patch-clamp technique and fura-2 fluorescence detection enables the study of study calcium fluxes or related increases in cytosolic calcium concentration. Here we used the excised patch configuration, focusing the photomultiplier on the tip of the recording pipette where the fluorescent dye was present (FLEP, fluorescence combined with excised patch). This configuration has several advantages, i.e. a lack of delay in loading the fluorophore, of interference by internal calcium buffers and of photobleaching, due to the quasi-infinite dye reservoir inside the pipette. Upon voltage stimulation of tonoplast patches, sustained and robust fluorescence signals indicated permeation of calcium through the slow vacuolar (SV) channel. Both SV currents and fluorescence signal changes were absent in the presence of SV channel inhibitors and in vacuoles from Arabidopsis tpc1 knockout plants that lack SV channel activity. The fractional calcium currents of this non-selective cation channel were voltage-dependent, and were approximately 10% of the total SV currents at elevated positive potentials. Interestingly, calcium permeation could be recorded as the same time as oppositely directed potassium fluxes. These events would have been impossible to detect using patch-clamp measurements alone. Thus, we propose use of the FLEP technique for the study of divalent ion-selective channels or transporters that may be difficult to access using conventional electrophysiological approaches.

Imaging the quantal substructure of single IP3R channel activity during Ca2+ puffs in intact mammalian cells

The spatiotemporal patterning of Ca(2+) signals regulates numerous cellular functions, and is determined by the functional properties and spatial clustering of inositol trisphosphate receptor (IP(3)R) Ca(2+) release channels in the endoplasmic reticulum membrane. However, studies at the single-channel level have been hampered because IP(3)Rs are inaccessible to patch-clamp recording in intact cells, and because excised organelle and bilayer reconstitution systems disrupt the Ca(2+)-induced Ca(2+) release (CICR) process that mediates channel-channel coordination. We introduce here the use of total internal reflection fluorescence microscopy to image single-channel Ca(2+) flux through individual and clustered IP(3)Rs in intact mammalian cells. This enables a quantal dissection of the local calcium puffs that constitute building blocks of cellular Ca(2+) signals, revealing stochastic recruitment of, on average, approximately 6 active IP(3)Rs clustered within <500 nm. Channel openings are rapidly ( approximately 10 ms) recruited by opening of an initial trigger channel, and a similarly rapid inhibitory process terminates puffs despite local [Ca(2+)] elevation that would otherwise sustain Ca(2+)-induced Ca(2+) release indefinitely. Minimally invasive, nano-scale Ca(2+) imaging provides a powerful tool for the functional study of intracellular Ca(2+) release channels while maintaining the native architecture and dynamic interactions essential for discrete and selective cell signaling.

Chemical calcium indicators

Our understanding of the underlying mechanisms of Ca2+ signaling as well as our appreciation for its ubiquitous role in cellular processes has been rapidly advanced, in large part, due to the development of fluorescent Ca2+ indicators. In this chapter, we discuss some of the most common chemical Ca2+ indicators that are widely used for the investigation of intracellular Ca2+ signaling. Advantages, limitations and relevant procedures will be presented for each dye including their spectral qualities, dissociation constants, chemical forms, loading methods and equipment for optimal imaging. Chemical indicators now available allow for intracellular Ca2+ detection over a very large range (<50 nM to >50 microM). High affinity indicators can be used to quantify Ca2+ levels in the cytosol while lower affinity indicators can be optimized for measuring Ca2+ in subcellular compartments with higher concentrations. Indicators can be classified into either single wavelength or ratiometric dyes. Both classes require specific lasers, filters, and/or detection methods that are dependent upon their spectral properties and both classes have advantages and limitations. Single wavelength indicators are generally very bright and optimal for Ca2+ detection when more than one fluorophore is being imaged. Ratiometric indicators can be calibrated very precisely and they minimize the most common problems associated with chemical Ca2+ indicators including uneven dye loading, leakage, photobleaching, and changes in cell volume. Recent technical advances that permit in vivo Ca2+ measurements will also be discussed.

Simplified model of cytosolic Ca2+ dynamics in the presence of one or several clusters of Ca2+ -release channels

Calcium release from intracellular stores plays a key role in the regulation of a variety of cellular activities. In various cell types this release occurs through inositol-triphosphate (IP3) receptors which are Ca2+ channels whose open probability is modulated by the cytosolic Ca2+ concentration itself. Thus, the combination of Ca2+ release and Ca2+ diffusion evokes a variety of Ca2+ signals depending on the number and relative location of the channels that participate of them. In fact, a hierarchy of Ca2+ signals has been observed in Xenopus laevis oocytes, ranging from very localized events (puffs and blips) to waves that propagate throughout the cell. In this cell type channels are organized in clusters. The behavior of individual channels within a cluster cannot be resolved with current optical techniques. Therefore, a combination of experiments and mathematical modeling is unavoidable to understand these signals. However, the numerical simulation of a detailed mathematical model of the problem is very hard given the large range of spatial and temporal scales that must be covered. In this paper we present an alternative model in which the cluster region is modeled using a relatively fine grid but where several approximations are made to compute the cytosolic Ca2+ concentration ([Ca;{2+}]) distribution. The inner-cluster [Ca;{2+}] distribution is used to determine the openings and closings of the channels of the cluster. The spatiotemporal [Ca;{2+}] distribution outside the cluster is determined using a coarser grid in which each (active) cluster is represented by a point source whose current is proportional to the number of open channels determined before. A full reaction-diffusion system is solved on this coarser grid.

Modeling Ca2+ feedback on a single inositol 1,4,5-trisphosphate receptor and its modulation by Ca2+ buffers

The inositol 1,4,5-trisphosphate receptor/channel (IP(3)R) is a major regulator of intracellular Ca(2+) signaling, and liberates Ca(2+) ions from the endoplasmic reticulum in response to binding at cytosolic sites for both IP(3) and Ca(2+). Although the steady-state gating properties of the IP(3)R have been extensively studied and modeled under conditions of fixed [IP(3)] and [Ca(2+)], little is known about how Ca(2+) flux through a channel may modulate the gating of that same channel by feedback onto activating and inhibitory Ca(2+) binding sites. We thus simulated the dynamics of Ca(2+) self-feedback on monomeric and tetrameric IP(3)R models. A major conclusion is that self-activation depends crucially on stationary cytosolic Ca(2+) buffers that slow the collapse of the local [Ca(2+)] microdomain after closure. This promotes burst-like reopenings by the rebinding of Ca(2+) to the activating site; whereas inhibitory actions are substantially independent of stationary buffers but are strongly dependent on the location of the inhibitory Ca(2+) binding site on the IP(3)R in relation to the channel pore.

Localization of puff sites adjacent to the plasma membrane: functional and spatial characterization of Ca2+ signaling in SH-SY5Y cells utilizing membrane-permeant caged IP3

The Xenopus oocyte has been a favored model system in which to study spatio-temporal mechanisms of intracellular Ca2+ dynamics, in large part because this giant cell facilitates intracellular injections of Ca2+ indicator dyes, buffers and caged compounds. However, the recent commercial availability of membrane-permeant ester forms of caged IP3 (ci-IP3) and EGTA, now allows for facile loading of these compounds into smaller mammalian cells, permitting control of [IP3]i and cytosolic Ca2+ buffering. Here, we establish the human neuroblastoma SH-SY5Y cell line as an advantageous experimental system for imaging Ca2+ signaling, and characterize IP3-mediated Ca2+ signaling mechanisms in these cells. Flash photo-release of increasing amounts of i-IP3 evokes Ca2+ puffs that transition to waves, but intracellular loading of EGTA decouples release sites, allowing discrete puffs to be studied over a wide range of [IP3]. Puff activity persists for minutes following a single photo-release, pointing to a slow rate of i-IP3 turnover in these cells and suggesting that repetitive Ca2+ spikes with periods of 20-30s are not driven by oscillations in [IP3]. Puff amplitudes are independent of [IP3], whereas their frequencies increase with increasing photo-release. Puff sites in SH-SY5Y cells are not preferentially localized near the nucleus, but instead are concentrated close to the plasma membrane where they can be visualized by total internal reflection microscopy, offering the potential for unprecedented spatio-temporal resolution of Ca2+ puff kinetics.

Modulation of calcium signals by fluorescent dyes in the presence of tubular endoplasmic reticulum: a modelling approach

The complex network of Ca(2+) signals uses local events as building blocks for generating global calcium signals with different shapes. However, the nature of the large time- and space-scales of local calcium signals observed in Xenopus oocytes has remained unclear. By numeric simulations that include optical blurring of the image and the geometrical restrictions imposed by tubules of the endoplasmic reticulum or other cell structures, we investigate how the fluorescent dye affect the observed features of calcium events, such as rate of signal decay, spatial size, fluorescence amplitude, or the apparent diffusion like from a point source in a spherically symmetric space. We add more evidence that, irrespective of the dye properties, local calcium signals produced in the presence of tubular cellular structures are consistently wider than expected in a homogeneous environment. Moreover, the spatial dimension and the decay time of the event increase with the quantity of liberated Ca(2+). Our results also indicate that a fast binding Ca(2+) indicator that does not bind to cytosolic proteins yields fast signals when the event is observed in the front of the release site, and slow signals when the event is viewed from the opposite side of the tubule. We propose several ways to test our model by various experimental procedures.

Calcium Green FlAsH as a genetically targeted small-molecule calcium indicator

Intracellular Ca(2+) regulates numerous proteins and cellular functions and can vary substantially over submicron and submillisecond scales, so precisely localized fast detection is desirable. We have created a approximately 1-kDa biarsenical Ca(2+) indicator, called Calcium Green FlAsH (CaGF, 1), to probe [Ca(2+)] surrounding genetically targeted proteins. CaGF attached to a tetracysteine motif becomes ten-fold more fluorescent upon binding Ca(2+), with a K(d) of approximately 100 microM, <1-ms kinetics and good Mg(2+) rejection. In HeLa cells expressing tetracysteine-tagged connexin 43, CaGF labels gap junctions and reports Ca(2+) waves after injury. Total internal reflection microscopy of tetracysteine-tagged, CaGF-labeled alpha(1C) L-type calcium channels shows fast-rising depolarization-evoked Ca(2+) transients, whose lateral nonuniformity suggests that the probability of channel opening varies greatly over micron dimensions. With moderate Ca(2+) buffering, these transients decay surprisingly slowly, probably because most of the CaGF signal comes from closed channels feeling Ca(2+) from a tiny minority of clustered open channels. With high Ca(2+) buffering, CaGF signals decay as rapidly as the calcium currents, as expected for submicron Ca(2+) domains immediately surrounding active channels. Thus CaGF can report highly localized, rapid [Ca(2+)] dynamics.

Hybrid stochastic and deterministic simulations of calcium blips

Intracellular calcium release is a prime example for the role of stochastic effects in cellular systems. Recent models consist of deterministic reaction-diffusion equations coupled to stochastic transitions of calcium channels. The resulting dynamics is of multiple time and spatial scales, which complicates far-reaching computer simulations. In this article, we introduce a novel hybrid scheme that is especially tailored to accurately trace events with essential stochastic variations, while deterministic concentration variables are efficiently and accurately traced at the same time. We use finite elements to efficiently resolve the extreme spatial gradients of concentration variables close to a channel. We describe the algorithmic approach and we demonstrate its efficiency compared to conventional methods. Our single-channel model matches experimental data and results in intriguing dynamics if calcium is used as charge carrier. Random openings of the channel accumulate in bursts of calcium blips that may be central for the understanding of cellular calcium dynamics.

Determining calcium concentration in heterogeneous model systems using multiple indicators

Intracellular free calcium concentrations ([Ca2+]i) are assessed by measuring indicator fluorescence in entire cells or subcellular regions using fluorescence microscopy. [Ca2+]i is calculated using equations which link fluorescence intensities (or intensity ratios) to calcium concentrations [G. Grynkiewicz, M. Poenie, R.Y. Tsien, A new generation of Ca2+ indicators with greatly improved fluorescence properties, J. Biol. Chem. 260 (1985) 3440-3450]. However, if calcium ions are heterogeneously distributed within a region of interest, then the observed average fluorescence intensity may not reflect average [Ca2+]i. We assessed potential calcium determination errors in mathematical and experimental models consisting of 'low' and 'high' calcium compartments, using indicators with different affinity for calcium. [Ca2+] calculated using average fluorescence intensity was lower than the actual mean concentrations. Low affinity indicators reported higher (more accurate) values than their high affinity counterparts. To estimate compartment dimensions and respective [Ca2+], we extended the standard approach by using different indicator responses to the same [Ca2+]. While two indicators were sufficient to provide a partial characterization of two-compartment model systems, the use of three or more indicators offered full description of the model provided compartmental [Ca2+] were within the indicator sensitivity ranges. These results show that uneven calcium distribution causes underestimation of actual [Ca2+], and offers novel approaches to estimating calcium heterogeneity.

Calcium sparklets regulate local and global calcium in murine arterial smooth muscle

In arterial smooth muscle, protein kinase Calpha (PKCalpha) coerces discrete clusters of L-type Ca2+ channels to operate in a high open probability mode, resulting in subcellular domains of nearly continual Ca2+ influx called 'persistent Ca2+ sparklets'. Our previous work suggested that steady-state Ca2+ entry into arterial myocytes, and thus global [Ca2+]i, is regulated by Ca2+ influx through clusters of L-type Ca2+ channels operating in this persistently active mode in addition to openings of solitary channels functioning in a low-activity mode. Here, we provide the first direct evidence supporting this 'Ca2+ sparklet' model of Ca2+ influx at a physiological membrane potential and external Ca2+ concentration. In support of this model, we found that persistent Ca2+ sparklets produced local and global elevations in [Ca2+]i. Membrane depolarization increased Ca2+ influx via low-activity and high-activity persistent Ca2+ sparklets. Our data indicate that Ca2+ entering arterial smooth muscle through persistent Ca2+ sparklets accounts for approximately 50% of the total dihydropyridine-sensitive (i.e. L-type Ca2+ channel) Ca2+ influx at a physiologically relevant membrane potential (-40 mV) and external Ca2+ concentration (2 mm). Consistent with this, inhibition of basal PKCalpha-dependent persistent Ca2+ sparklets decreased [Ca2+]i by about 50% in isolated arterial myocytes and intact pressurized arteries. Taken together, these data support the conclusion that in arterial smooth muscle steady-state Ca2+ entry and global [Ca2+]i are regulated by low-activity and PKCalpha-dependent high-activity persistent Ca(2+) sparklets.

Imaging single-channel calcium microdomains

The Ca(2+) microdomains generated around the mouth of open ion channels represent the basic building blocks from which cytosolic Ca(2+) signals are constructed. Recent improvements in optical imaging techniques now allow these microdomains to be visualized as single channel calcium fluorescence transients (SCCaFTs), providing information about channel properties that was previously accessible only by electrophysiological patch-clamp recordings. We review recent advances in single channel Ca(2+) imaging methodologies, with emphasis on total internal reflection fluorescence microscopy (TIRFM) as the technique of choice for recording SCCaFTs from voltage- and ligand-gated plasmalemmal ion channels. This technique of 'optical patch-clamp recording' is massively parallel, permitting simultaneous imaging of hundreds of channels; provides millisecond resolution of gating kinetics together with sub-micron spatial resolution of channel locations; and is applicable to diverse families of membrane channels that display partial permeability to Ca(2+) ions.

'Trigger' events precede calcium puffs in Xenopus oocytes

The liberation of calcium ions sequestered in the endoplasmic reticulum through inositol 1,4,5-trisphosphate receptors/channels (IP(3)Rs) results in a spatiotemporal hierarchy of calcium signaling events that range from single-channel openings to local Ca(2+) puffs believed to arise from several to tens of clustered IP(3)Rs to global calcium waves. Using high-resolution confocal linescan imaging and a sensitive Ca(2+) indicator dye (fluo-4-dextran), we show that puffs are often preceded by small, transient Ca(2+) elevations that we christen "trigger events". The magnitude of triggers is consistent with their arising from the opening of a single IP(3) receptor/channel, and we propose that they initiate puffs by recruiting neighboring IP(3)Rs within the cluster by a regenerative process of Ca(2+)-induced Ca(2+) release. Puff amplitudes (fluorescence ratio change) are on average approximately 6 times greater than that of the triggers, suggesting that at least six IP(3)Rs may simultaneously be open during a puff. Trigger events have average durations of approximately 12 ms, as compared to 19 ms for the mean rise time of puffs, and their spatial extent is approximately 3 times smaller than puffs (respective widths at half peak amplitude 0.6 and 1.6 micro m). All these parameters were relatively independent of IP(3) concentration, although the proportion of puffs showing resolved triggers was greatest (approximately 80%) at low [IP(3)]. Because Ca(2+) puffs constitute the building blocks from which cellular IP(3)-mediated Ca(2+) signals are constructed, the events that initiate them are likely to be of fundamental importance for cell signaling. Moreover, the trigger events provide a useful yardstick by which to derive information regarding the number and spatial arrangement of IP(3)Rs within clusters.

The number and spatial distribution of IP3 receptors underlying calcium puffs in Xenopus oocytes

Calcium puffs are local Ca(2+) release events that arise from a cluster of inositol 1,4,5-trisphosphate receptor channels (IP(3)Rs) and serve as a basic "building block" from which global Ca(2+) waves are generated. Important questions remain as to the number of IP(3)Rs that open during a puff, their spatial distribution within a cluster, and how much Ca(2+) current flows through each channel. The recent discovery of "trigger" events-small Ca(2+) signals that immediately precede puffs and are interpreted to arise through opening of single IP(3)R channels-now provides a useful yardstick by which to calibrate the Ca(2+) flux underlying puffs. Here, we describe a deterministic numerical model to simulate puffs and trigger events. Based on confocal linescan imaging in Xenopus oocytes, we simulated Ca(2+) release in two sequential stages; representing the trigger by the opening of a single IP(3)R in the center of a cluster for 12 ms, followed by the concerted opening of some number of IP(3)Rs for 19 ms, representing the rising phase of the puff. The diffusion of Ca(2+) and Ca(2+)-bound indicator dye were modeled in a three-dimensional cytosolic volume in the presence of immobile and mobile Ca(2+) buffers, and were used to predict the observed fluorescence signal after blurring by the microscope point-spread function. Optimal correspondence with experimental measurements of puff spatial width and puff/trigger amplitude ratio was obtained assuming that puffs arise from the synchronous opening of 25-35 IP(3)Rs, each carrying a Ca(2+) current of approximately 0.4 pA, with the channels distributed through a cluster 300-800 nm in diameter.

Analysis of puff dynamics in oocytes: interdependence of puff amplitude and interpuff interval

Puffs are localized Ca(2+) signals that arise in oocytes in response to inositol 1,4,5-trisphosphate (IP(3)). They are analogous to the sparks of myocytes and are believed to be the result of the liberation of Ca(2+) from the endoplasmic reticulum through the coordinated opening of IP(3) receptor/channels clustered at a functional release site. In this article, we analyze sequences of puffs that occur at the same site to help elucidate the mechanisms underlying puff dynamics. In particular, we show a dependence of the interpuff time on the amplitude of the preceding puff, and of the amplitude of the following puff on the preceding interval. These relationships can be accounted for by an inhibitory role of the Ca(2+) that is liberated during puffs. We construct a stochastic model for a cluster of IP(3) receptor/channels that quantitatively replicates the observed behavior, and we determine that the characteristic time for a channel to escape from the inhibitory state is of the order of seconds.

In situ background estimation in quantitative fluorescence imaging

Fluorescence imaging of bulk-stained tissue is a popular technique for monitoring the activities in a large population of cells. However, a precise quantification of such experiments is often compromised by an ambiguity of background estimation. Although, in single-cell-staining experiments, background can be measured from a neighboring nonstained region, such a region often does not exist in bulk-stained tissue. Here we describe a novel method that overcomes this problem. In contrast to previous methods, we determined the background of a given region of interest (ROI) using the information contained in the temporal dynamics of its individual pixels. Since no information outside the ROI is needed, the method can be used regardless of the staining profile in the surrounding tissue. Moreover, we extend the method to deal with background inhomogeneities within a single ROI, a problem not yet solved by any of the currently available tools. We performed computer simulations to demonstrate the accuracy of our method and give example applications in ratiometric calcium imaging of bulk-stained olfactory bulb slices. Converting the fluorescence signals into [Ca2+] gives resting values consistent with earlier single-cell staining results, and odorant-induced [Ca2+] transients can be quantitatively compared in different cells. Using these examples we show that inaccurate background subtraction introduces large errors (easily in the range of 100%) in the assessment of both resting [Ca2+] and [Ca2+] dynamics. The proposed method allows us to avoid such errors.

"Optical patch-clamping": single-channel recording by imaging Ca2+ flux through individual muscle acetylcholine receptor channels

We describe an optical technique using total internal reflection fluorescence (TIRF) microscopy to obtain simultaneous and independent recordings from numerous ion channels via imaging of single-channel Ca²⁺ flux. Muscle nicotinic acetylcholine (ACh) receptors made up of αβγδ subunits were expressed in Xenopus oocytes, and single channel Ca²⁺ fluorescence transients (SCCaFTs) were imaged using a fast (500 fps) electron-multiplied c.c.d. camera with fluo-4 as the indicator. Consistent with their arising through openings of individual nicotinic channels, SCCaFTs were seen only when a nicotinic agonist was present in the bathing solution, were blocked by curare, and increased in frequency as roughly the second power of [ACh]. Their fluorescence amplitudes varied linearly with membrane potential and extrapolated to zero at about +60 mV. The rise and fall times of fluorescence were as fast as 2 ms, providing a kinetic resolution adequate to characterize channel gating kinetics; which showed mean open times of 7.9 and 15.8 ms when activated, respectively, by ACh or suberyldicholine. Simultaneous records were obtained from >400 channels in the imaging field, and we devised a novel “channel chip” representation to depict the resultant large dataset as a single image. The positions of SCCaFTs remained fixed (<100 nm displacement) over tens of seconds, indicating that the nicotinic receptor/channels are anchored in the oocyte membrane; and the spatial distribution of channels appeared random without evidence of clustering. Our results extend single-channel TIRFM imaging to ligand-gated channels that display only partial permeability to Ca²⁺, and demonstrate an order-of-magnitude improvement in kinetic resolution. We believe that functional single-channel imaging opens a new approach to ion channel study, having particular advantages over patch-clamp recording in that it is massively parallel, and provides high-resolution spatial information that is inaccessible by electrophysiological techniques.