Metal–organic framework UiO-66 coated stainless steel fiber for solid-phase microextraction of phenols in water samples

Graphene-based metal and nitrogen-doped carbon composites as adsorbents for highly sensitive solid phase microextraction of polycyclic aromatic hydrocarbons

Herein, a graphene-based metal and nitrogen-doped carbon (GNC-Co) composite, derived from zeolite imidazolate framework-67 (ZIF-67)-graphene oxide composites, was successfully developed and applied as an excellent fiber coating for solid phase microextraction (SPME) with enhanced performance. The fabricated carbon has a hierarchically micro/mesoporous structure with a high specific surface area of 123 m2 g-1. The study found that pyrolytic graphene (G) has good adsorption properties for anthracene, phenanthrene, fluoranthene and pyrene, while pyrolytic ZIF-67 (NC-Co) has good adsorption properties for naphthalene, acenaphthylene, acenaphthylene and fluorene. Combined with the advantage of G and NC-Co, the synthesized composite GNC-Co enabled the integration of the unique properties of these two fascinating materials and proved to show better performance in the extraction of all polycyclic aromatic hydrocarbons (PAHs). Compared to the commercial PDMS fiber, the self-made fiber achieved GC responses about 2-9 times as high as those obtained by the commercial 30 μm PDMS fiber. Furthermore, the self-made fiber obtained low detection limits in the range of 0.01-0.74 ng L-1 and wide linearity under the optimized extraction conditions. Finally, the GNC-Co coated fiber was successfully used for the detection of PAHs in real river water samples, which proved the applicability of the method.

In situ growth of Zr-based metal-organic framework UiO-66-NH2 for open-tubular capillary electrochromatography

The high stability and other properties of Zr(IV)-based metal organic frameworks(MOFs) make it a promising choice for chromatographic separation, while the application in open-tubular capillary electrochromatography (OT-CEC) separation has not been explored yet. Herein, we report the first example of the in-situ growth of UiO-66-NH₂ onto the capillary for open-tubular capillary electrochromatography. UiO-66-NH₂ consists of ZrCl₄ and 2-amino-1,4-benzenedicarboxylic acid, which is highly porous and stable in a variety of solvents. The prepared UiO-66-NH₂ modified capillary was characterized by scanning electron microscopy (SEM) and Fourier transform infrared spectra (FT-IR), and the results confirmed the successful growth of the UiO-66-NH₂ . The baseline separation of chlorobenzenes, phenoxyacids and two groups of phenols was achieved owing to the combined interaction of π-π interaction, hydrophobic interaction, molecular sieve effect, electrophoretic migration and hydrogen-bonding interaction etc. Besides, the prepared capillaries showed good reproducibility, with relative standard deviations (RSDs) for intra-day, inter-day and column-to-column runs in the range of 1.38-2.60%, 3.39-4.05%, and 3.47-5.03%, respectively. Our work indicates Zr(IV)-based MOFs are promising materials as stationary phase in CEC separation.

Decoration of Cotton Fibers with a Water-Stable Metal-Organic Framework (UiO-66) for the Decomposition and Enhanced Adsorption of Micropollutants in Water

We report on the successful functionalization of cotton fabrics with a water-stable metal-organic framework (MOF), UiO-66, under mild solvothermal conditions (80 °C) and its ability to adsorb and degrade water micropollutants. The functionalized cotton samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). UiO-66 crystals grew in a uniform and conformal manner over the surface of the cotton fibers. The cotton fabrics functionalized with UiO-66 frameworks exhibited an enhanced uptake capacity for methylchlorophenoxypropionic acid (MCPP), a commonly used herbicide. The functionalized fabrics also showed photocatalytic activity, demonstrated by the degradation of acetaminophen, a common pharmaceutical compound, under simulated sunlight irradiation. These results indicate that UiO-66 can be supported on textile substrates for filtration and photocatalytic purposes and that these substrates can find applications in wastewater decontamination and micropollutant degradation.

A sensitive electrochemical sensor based on ZIF-8–acetylene black–chitosan nanocomposites for rutin detection

Herein, we fabricated a sensitive rutin electrochemical sensor via modifying glassy carbon electrode (GCE) with zeolitic imidazolate framework-8 (ZIF-8) and acetylene black (AB) in the presence of chitosan (CS). The electrochemical activity and experimental parameters of the ZIF-8-AB-CS/GCE sensor were investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Under the optimal conditions, the sensor presented a reasonable linear response in the range of 0.1–10 μM with a limit of detection (LOD) as low as 0.004 μM (S/N = 3). The sensor possessed good reproducibility and high stability, and was successfully applied to detect rutin tablet samples with satisfactory results, which was attributed to the synergistic effect between ZIF-8 and AB. Meanwhile, the sensor displayed a potential application for detection of other analytes in real samples. Furthermore, a probable interaction mechanism was proposed to account for the interaction between rutin and the nanocomposite electrode, which was not discussed in previous reports.

A sensitive ZIF-8-AB-CS/GCE for rutin detection is constructed and the interaction between them is discussed for the first time.

Recent advances in metal-organic frameworks and covalent organic frameworks for sample preparation and chromatographic analysis

In the field of analytical chemistry, sample preparation and chromatographic separation are two core procedures. The means by which to improve the sensitivity, selectivity and detection limit of a method have become a topic of great interest. Recently, porous organic frameworks, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), have been widely used in this research area because of their special features, and different methods have been developed. This review summarizes the applications of MOFs and COFs in sample preparation and chromatographic stationary phases. The MOF- or COF-based solid-phase extraction (SPE), solid-phase microextraction (SPME), gas chromatography (GC), high-performance liquid chromatography (HPLC) and capillary electrochromatography (CEC) methods are described. The excellent properties of MOFs and COFs have resulted in intense interest in exploring their performance and mechanisms for sample preparation and chromatographic separation.

Fabrication of Metal-Organic Framework MOF-177 Coatings on Stainless Steel Fibers for Head-Space Solid-Phase Microextraction of Phenols

Direct head-space solid-phase microextraction (HS-SPME) of phenols in water is usually difficult due to its polarity and solubility in aqueous matrix. Herein we report the fabrication of metal-organic framework MOF-177 coated stainless steel fiber for the HS-SPME of phenols (2-methylolphenol, 4-methylolphenol, 2,4-dimethylolphenol, 2,4-dichlorphenol, and 3-methyl-4-chlorophenol) in environmental water samples prior to the gas chromatography-mass spectrometry detection. Several parameters affecting the extraction efficiency were optimized in the experiment, including extraction temperature and time, the pH value and salt addition. The results indicated that the coated fiber gave low detection limits (0.015-0.043 μg L^-1) and good repeatability with the RSD ranging from 2.8% to 5.5% for phenols. The recoveries are between 84.5%-98.6% with the spiked level of 10 μg L^-1 for the real water samples. The established method may afford a kind of potential enrichment material and a reference method for the analysis of methylphenols in water samples.

Recent applications of metal-organic frameworks in sample pretreatment

Metal-organic frameworks are promising materials in diverse analytical applications especially in sample pretreatment by virtue of their diverse structure topology, tunable pore size, permanent nanoscale porosity, high surface area, and good thermostability. According to hydrostability, metal-organic frameworks are divided into moisture-sensitive and water-stable types. In the actual applications, both kinds of metal-organic frameworks are usually engineered into hybrid composites containing magnetite, silicon dioxide, graphene, or directly carbonized to metal-organic frameworks derived carbon. These metal-organic frameworks based materials show good extraction performance to environmental pollutants. This review provides a critical overview of the applications of metal-organic frameworks and their composites in sample pretreatment modes, that is, solid-phase extraction, magnetic solid-phase extraction, micro-solid-phase extraction, solid-phase microextraction, and stir bar solid extraction.

A novel Schiff base network-1 nanocomposite coated fiber for solid-phase microextraction of phenols from honey samples

A novel covalent organic framework, Schiff base network-1 (SNW-1), was synthesized and used as a solid-phase microextraction (SPME) fiber coating material. The SNW-1 coated SPME fiber was fabricated by a covalent chemical cross-linking between the SNW-1 nanocomposite and a silanol-functionalized stainless steel wire substrate. Scanning electron microscopy and nitrogen isothermal adsorption results indicate that the new fiber coating exhibited a porous, homogenous surface with the Brunauer-Emmett-Teller surface of 668m²g^-1. The prepared fiber was explored for the SPME of phenols from honey samples prior to their determination by gas chromatography-mass spectrometry. The developed method had large enrichment factors (136-816), low limits of detection (0.06-0.2ngg^-1), good linearity (0.1-100.0ngg^-1) and repeatability (<9.7%) for phenols. The recoveries for spiked phenols (1.0ngg^-1 and 10.0ngg^-1) in Wolfberry, Robinia and Codonopsis honey samples were in the range of 84.2-107.2% with the relative standard deviations ranging from 3.8% to 12.7%. The developed method was suitable for the determination of phenols from honey samples.

Polydopamine-reinforced magnetization of zeolitic imidazolate framework ZIF-7 for magnetic solid-phase extraction of polycyclic aromatic hydrocarbons from the air-water environment

Zeolitic imidazolate frameworks (ZIFs) consist of metal nodes connected to imidazolate linkers, having both the properties of metal-organic frameworks (MOFs) and inorganic zeolites, such as controllable pore sizes, high porosity and surface areas, as well as exceptional thermal and chemical stability, thereby making them a class of attractive materials for diverse analytical applications. In this study, we reported a facile magnetization process of ZIF-7 (zinc benzimidazolate) for simultaneous magnetic extraction of polycyclic aromatic hydrocarbons (PAHs) by simply mixing ZIF-7 and polydopamine (PDA)-coated Fe3O4 nanoparticles (PDA@Fe3O4) in solutions. Functional groups (-OH and -NH2), provided by PDA as a highly efficient molecular linker, could attract and anchor ZIF-7 through noncovalent adsorption and covalent cross-link interactions, thereby promoting the complete magnetization of ZIFs and enhancing their stability and reusability. The bridging ligand benzimidazolate, could be bonded with PAHs because of its high surface area, large pores, accessible coordinative unsaturated sites (π-complexation), and π-π stacking action. This ZIF-based magnetic solid-phase extraction (SPE), coupled with gas chromatography/tandem mass spectrometry (GC/MS), was further evaluated for analysis of PAHs from rainwater and air samples of particulate matter less than 2.5μm in diameter (PM2.5). The main effective parameters, including ionic strength, solution pH, extraction time, desorption solvent and desorption time, were investigated, respectively. Under optimized conditions, the developed method based on Fe3O4@PDA/ZIF-7 gave detection limits of 0.71-5.79ng/L, and quantification limits of 2.50-19.2ng/L for PAHs, respectively. The relative standard deviations for intra-day and inter-day analyses were in the range of 3.1-9.1% and 6.1-12.7%, respectively. The PAHs founded in PM2.5 were in the range of 0.40-6.79ng/m(3). Good recoveries (>82%) with low relative standard deviations (≤9.2%) were achieved. This method was demonstrated to be an accurate, convenient and sensitive pretreatment procedure for trace analysis of environmental water and air samples.

Covalent Bonding of Metal-Organic Framework-5/Graphene Oxide Hybrid Composite to Stainless Steel Fiber for Solid-Phase Microextraction of Triazole Fungicides from Fruit and Vegetable Samples

A hybrid material of the zinc-based metal-organic framework-5 and graphene oxide (metal-organic framework-5/graphene oxide) was prepared as a novel fiber coating material for solid-phase microextraction (SPME). The SPME fibers were fabricated by covalent bonding via chemical cross-linking between the coating material metal-organic framework-5/graphene oxide and stainless steel wire. The prepared fiber was used for the extraction of five triazole fungicides from fruit and vegetable samples. Gas chromatography coupled with microelectron capture detector (GC-μECD) was used for quantification. The developed method gave a low limit of detection (0.05-1.58 ng g(-1)) and good linearity (0.17-100 ng g(-1)) for the determination of the triazole fungicides in fruit and vegetable samples. The relative standard deviations (RSDs) for five replicate extractions of the triazole fungicides ranged from 3.7 to 8.9%. The method recoveries for spiked fungicides (5, 20, and 50 ng g(-1)) in grape, apple, cucumber, celery cabbage, pear, cabbage, and tomato samples were in the range of 85.6-105.8% with the RSDs ranging from 3.6 to 11.4%, respectively, depending on both the analytes and samples. The metal-organic framework-5/graphene oxide coated fiber was stable enough for 120 extraction cycles without a significant loss of extraction efficiency. The method was suitable for the determination of triazole fungicides in fruit and vegetable samples.

Zirconium (IV)-based metal organic framework (UIO-67) as efficient sorbent in dispersive solid phase extraction of plant growth regulator from fruits coupled with HPLC fluorescence detection

A stable zirconium (Ⅳ)-based metal organic frameworks (UIO-67) material possessing good chemical, thermal and water stability was synthesized and applied as a sorbent for the dispersive solid phase extraction (DSPE) of 8 plant growth regulators (PGRs) in fruit samples. Fluorescence labeling combined with high performance liquid chromatography fluorescence detection (HPLC-FLD), was used to quantify the target analytes. Characterization of the UIO-67 material was performed by X-ray diffraction(XRD) and scanning electron microscopy (SEM). The experimental parameters, such as amount of UIO-67, type and volume of eluting solvent, adsorption and desorption time, were optimized. Under the optimized conditions, good linearity was observed in the range of 10-1000 pmol/mL with R(2)>0.9989. The limits of detection and limits of quantification were in the range of 0.21-0.57ng/mL and 0.81-1.91ng/mL, respectively. The intra-day and inter-day precisions (based on the relative standard deviation, n=3) of the PGR derivatives were under 3.1% and 5.3% respectively and the accuracies of the method for the PGRs were in the range from 89.3% to 102.3%. The developed method was successfully applied to analyze PGRs residues in fruit samples. The proposed method is proved to be simple, environment-friendly and inexpensive and it is feasible to directly use UIO-67 as sorbent to extract targets by varying conditions.

A porous carbon derived from amino-functionalized material of Institut Lavoisier as a solid-phase microextraction fiber coating for the extraction of phthalate esters from tea

In this work, a porous carbon derived from amino-functionalized material of Institut Lavoisier (C-NH2 -MIL-125) was prepared and coated onto a stainless-steel wire through sol-gel technique. The coated fiber was used for the solid-phase microextraction of trace levels of phthalate esters (diallyl phthalate, di-iso-butyl ortho-phthalate, di-n-butyl ortho-phthalate, benzyl-n-butyl ortho-phthalate, and bis(2-ethylhexy) ortho-phthalate) from tea beverage samples before gas chromatography with mass spectrometric analysis. Several experimental parameters that could influence the extraction efficiency such as extraction time, extraction temperature, sample pH, sample salinity, stirring rate, desorption temperature and desorption time, were investigated. Under the optimal conditions, the linearity existed in the range of 0.05-30.00 μg/L for green jasmine tea beverage samples, and 0.10-30.00 μg/L for honey jasmine tea beverage samples, with the correlation coefficients (r) ranging from 0.9939 to 0.9981. The limits of detection of the analytes for the method were 2.0-3.0 ng/L for green jasmine tea beverage sample, and 4.0-5.0 ng/L for honey jasmine tea beverage sample, depending on the compounds. The recoveries of the analytes for the spiked samples were in the range of 82.0-106.0%, and the precision, expressed as the relative standard deviations, was less than 11.1%.

In situ solvothermal synthesis of metal-organic framework coated fiber for highly sensitive solid-phase microextraction of polycyclic aromatic hydrocarbons

The present work reported a facile and simple in situ solvothermal growth method for immobilization of metal-organic framework UiO-66 via covalent bonding on amino functional silica fiber for highly sensitive solid-phase microextraction (SPME) of ten polycyclic aromatic hydrocarbons (PAHs) by coupling with gas chromatography-mass spectrometry (GC-MS) analysis. The developed SPME coated fiber has been characterized through SEM, TGA and XRD, confirmed the coating thickness of ∼25μm with high thermal and chemical stability. Under optimized conditions, the obtained method exhibited satisfactory linearity in range of 1.0-5000.0ngL(-1) for all the PAHs. The low detection limits were from 0.28ngL(-1) to 0.60ngL(-1) (S/N=3). The UiO-66 coated fibers showed good repeatability (RSDs less than 8.2%, n=5) and satisfying reproducibility between fiber to fiber (RSDs less than 8.9%, n=5). This method was successfully used for simultaneous determination of ten PAHs from Minjiang water and soil samples with satisfactory recoveries of 87.0-113.6% and 83.8-116.7%, respectively. Experimental results shows that the chemical bonding approach has dramatically improve the stability and lifetime of pure MOFs coating for SPME in sample pretreatment.

Determination of ultra-trace amounts of chlorophenols in rain, tap and river water by an electrochemically controlled in-tube solid phase microextraction method

A nanostructured copolymer coating consisting of PPy doped with Naf was electrochemically synthesized on the inner surface of a stainless steel capillary tube. It was utilized to extract trace pollutants from water samples.

A metal–organic framework/α-alumina composite with a novel geometry for enhanced adsorptive separation

Incorporation of MOF UiO-66 into an advanced α-alumina matrix leads to a novel composite concept for enhanced adsorptive separation.

Preparation of porous aromatic framework/ionic liquid hybrid composite coated solid-phase microextraction fibers and their application in the determination of organochlorine pesticides combined with GC-ECD detection

Novel porous aromatic framework/ionic liquid hybrid composite coated SPME fibers were prepared for the preconcentration of OCPs coupled with GC-ECD.

Zeolitic imidazole framework templated synthesis of nanoporous carbon as a novel fiber coating for solid-phase microextraction

A novel ZIF templated nanoporous carbon was prepared as the SPME fiber coating for the extraction of organochlorine pesticides from vegetable samples.

A nanoporous carbon material derived from pomelo peels as a fiber coating for solid-phase microextraction

A novel nanoporous carbon derived from a biomass source was prepared and used as an SPME fiber coating.

In situ hydrothermal growth of a dual-ligand metal–organic framework film on a stainless steel fiber for solid-phase microextraction of polycyclic aromatic hydrocarbons in environmental water samples

In situ hydrothermal growth of bio-MOF-1 film on stainless steel fiber for solid-phase microextraction of polycyclic aromatic hydrocarbons.

Graphene oxide reinforced polymeric ionic liquid monolith solid-phase microextraction sorbent for high-performance liquid chromatography analysis of phenolic compounds in aqueous environmental samples

A graphene oxide reinforced polymeric ionic liquids monolith was obtained by copolymerization of graphene oxide doped 1-(3-aminopropyl)-3-(4-vinylbenzyl)imidazolium 4-styrenesulfonate monomer and 1,6-di-(3-vinylimidazolium) hexane bihexafluorophosphate cross-linking agent. Coupled to high-performance liquid chromatography, the monolith was used as a solid-phase microextraction sorbent to analyze several phenolic compounds in aqueous samples. Under the optimized extraction and desorption conditions, linear ranges were 5-400 μg/L for 3-nitrophenol, 2-nitrophenol, and 2,5-dichlorophenol and 2-400 μg/L for 4-chlorophenol, 2-methylphenol, and 2,4,6-trichlorophenol (R(2) = 0.9973-0.9988). The limits of detection were 0.5 μg/L for 3-nitrophenol and 2-nitrophenol and 0.2 μg/L for the rest of the analytes. The proposed method was used to determine target analytes in groundwater from an industrial park and river water. None of the analytes was detected. Relative recoveries were in the range of 75.5-113%.