Metal-organic frameworks as stationary phase for application in chromatographic separation

Preparation of value-added metal-organic frameworks for high-performance liquid chromatography. Towards green chromatographic columns

This work applies the concepts of green chemistry, where polyethylene terephthalate (PET) bottles were used as the acid-dicarboxylic linker source for the synthesis of MIL-53(Al) metal organic frameworks (MOFs) and then used as a stationary phase for the separation of various solutes and compared with MIL-53(Al) synthesized from traditional terephthalic acid. Both synthesized MIL-53(Al) MOFs were characterized by scanning electron microscopy (SEM), FT-IR, X-ray diffraction (XRD), thermogravimetric analysis (TGA), and specific surface area analysis. Eight groups of standard analytes in addition to real samples were tested to evaluate the separation performance of the MIL-53(Al) packed columns in HPLC under various chromatographic conditions. Based on elution order of the studied compounds and the effects of mobile phase composition, the working mechanism was reversed phase mode in the presence of size-exclusion effects for large molecules, which exceeded the dynamic diameter of MIL-53(Al) (~7.6 Å). The effects of stationary phase sieving, mobile phase flow rate and composition, injected sample mass, and temperature were investigated relative to the chromatographic behavior of MIL-53(Al). MIL-53(Al) particle sieving before packing reduced peak broadening and significantly enhanced the chromatographic performance of the prepared columns up to 2.26 times relative to the number of theoretical plates. The MIL-53(Al) packed columns offered high-resolution separation for all studied mixtures with R_s >2 and good stability and long-term durability. At optimal conditions, the prepared columns exhibited efficiencies between 5600-63200 plates m^-1. Higher efficiencies were observed for alkylbenzenes and polyaromatic hydrocarbons as the organic linker in the MIL-53(Al) structure, which improved retention and separation of aromatics through π-π interactions. Thermodynamic parameters including ΔH, ΔS, and ΔG for the transfer of analyte from the mobile phase to the MIL-53(Al) stationary phase were studied. Compared with previously cited MOFs packed columns, the present MIL-53(Al) columns gave comparable selectivity and much better efficiency for most of the studied chemicals at optimum conditions, indicating the feasibility of MIL-53(Al) as a stationary phase for HPLC applications.

Asymmetric Supercapacitors Based on Hierarchically Nanoporous Carbon and ZnCo2O4 From a Single Biometallic Metal-Organic Frameworks (Zn/Co-MOF)

Metal-organic framework (MOF)-derived nanoporous carbons (NPCs) and porous metal oxide nanostructures or nanocomposites have gathered considerable interest due to their potential use in supercapacitor (SCs) applications, owing to their precise control over porous architectures, pore volumes, and surface area. Bimetallic MOFs could provide rich redox reactions deriving from improved charge transfer between different metal ions, so their supercapacitor performance could be further greatly enhanced. In this study, "One-for-All" strategy is adopted to synthesize both positive and negative electrodes for hybrid asymmetric SCs (ASCs) from a single bimetallic MOF. The bimetallic Zn/Co-MOF with cuboid-like structures were synthesized by a simple method. The MOF-derived nanoporous carbons (NPC) were then obtained by post-heat treatment of the as-synthesized Zn/Co-MOF and rinsing with HCl, and bimetallic oxides (ZnCo₂O₄) were achieved by sintering the Zn/Co-MOF in air. The as-prepared MOF-derived NPC and bimetallic oxides were utilized as negative and positive materials to assemble hybrid ASCs with 6 M KOH as an electrolyte. Owing to the matchable voltage window and specific capacitance between the negative (NPC) and positive (ZnCo₂O₄), the as-assembled ASCs delivered high specific capacitance of 94.4 F/g (cell), excellent energy density of 28.6 Wh/kg at a power density of 100 W/kg, and high cycling stability of 87.2% after 5,000 charge-discharge cycles. This strategy is promising in producing high-energy-density electrode materials in supercapacitors.

Nanoscale Hierarchically Micro- and Mesoporous Metal-Organic Frameworks for High-Resolution and High-Efficiency Capillary Electrochromatographic Separation

Metal-organic frameworks (MOFs) have been widely applied in a variety of fields. However, most of the developed MOFs are micrometer scale in crystal size and contain only micropores, which will limit the mass transport and diffusion of various analytes into their internal interaction sites, severely restricting the potential of MOFs in separation science. Herein, nanoscale hierarchically porous MOFs (NHP-MOFs) were first explored as a novel MOF-based stationary phase with excellent mass transfer performance and abundant accessible interaction sites for high-performance chromatographic separation. As a proof-of-concept demonstration, the nanoscale hierarchically micro- and mesoporous UiO-66 (NHP-UiO-66) was firmly immobilized on the capillary inner surface and utilized as the porous stationary phase for high-resolution and high-efficiency electrochromatographic separation. A wide range of low-, medium-, and high-molecular-weight analytes, including substituted benzenes, chlorobenzenes, polycyclic aromatic hydrocarbons, nucleosides, polypeptides, and proteins were all separated well on a NHP-UiO-66-coated column with excellent resolution and repeatability, exhibiting significantly improved column efficiency and separation ability compared to those of a microporous UiO-66-modified column. The maximum column efficiencies for all the six kinds of analytes reached up to 1.2 × 10⁵ plates/m, and the relative standard deviations of the migration times of substituted benzenes for intraday, interday, and column-to-column were all lower than 5.8%. These results reveal that NHP-MOFs can effectively combine the advantages of the high specific surface area of microporous MOFs and the excellent mass transfer performance and abundant accessible interaction sites of NHP materials, possessing great prospect for high-performance chromatographic separation.

Impact of the Preparation Procedure on the Performance of the Microporous HKUST-1 Metal-Organic Framework in the Liquid-Phase Separation of Aromatic Compounds

To date, metal-organic frameworks (MOFs) have been recognized as promising solid phases in high-performance liquid chromatography (HPLC). This research aimed to elucidate the role of the physico-chemical characteristics of the microporous HKUST-1 metal-organic framework in its operation as a selective adsorbent in HPLC. For this, the HKUST-1 samples were prepared by microwave-assisted synthesis and a solvothermal procedure. According to the chromatographic examinations, the HKUST-1 material synthesized in the microwave fields shows an efficient performance in the selective adsorption of aromatic compounds with different functionalities. This study revealed a significant impact of the preparation procedure on the mechanism of the liquid-phase adsorption on the HKUST adsorbents under conditions of the HPLC. An effect of the elution solvent with the different coordination ability to the Cu²⁺ sites in the HKUST-1 structure on the adsorption selectivity was observed.

Metal-Organic Framework Stationary Phases for One- and Two-Dimensional Micro-Gas Chromatographic Separations of Light Alkanes and Polar Toxic Industrial Chemicals

Despite promising advances with metal-organic frameworks (MOFs) as stationary phases for chromatography, the application of MOFs for one- and two-dimensional micro-gas chromatography (μGC and μGC × μGC) applications has yet to be shown. We demonstrate for the first time, μGC columns coated with two different MOFs, HKUST-1 and ZIF-8, for the rapid separation of high volatility light alkane hydrocarbons (natural gas) and determined the partition coefficients for toxic industrial chemicals, using μGC and μGC × μGC systems. Complete separation of natural gas components, methane through pentane, was completed within 1 min, with sufficient resolution to discriminate n-butane from i-butane. Layer-by-layer controlled deposition cycles of the MOFs were accomplished to establish the optimal film thickness, which was validated using GC (sorption thermodynamics), quartz-crystal microbalance gravimetric analysis and scanning electron microscopy. Complete surface coverage was not observed until after ~17 deposition cycles. Propane retention factors with HKUST-1-coated μGC and a state-of-the-art polar, porous-layer open-tubular (PLOT) stationary phase were approximately the same at ~7.5. However, with polar methanol, retention factors with these two stationary phases were 748 and 59, respectively, yielding methanol-to-propane selectivity factors of ~100 and ~8, respectively, a 13-fold increase in polarity with HKUST-1. These studies advance the applications of MOFs as μGC stationary phase.

Covalent organic frameworks for separation applications

Covalent organic frameworks (COFs) are an emerging class of crystalline porous polymers with highly tuneable structures and functionalities. COFs have been proposed as ideal materials for applications in the energy-intensive field of molecular separation due to their notable intrinsic features such as low density, exceptional stability, high surface area, and readily adjustable pore size and chemical environment. This review attempts to highlight the key advancements made in the synthesis of COFs for diverse separation applications such as water treatment or the separation of gas mixtures and organic molecules, including chiral and isomeric compounds. Methods proposed for the fabrication of COF-based columns and continuous membranes for practical applications are also discussed in detail. Finally, a perspective regarding the remaining challenges and future directions for COF research in the field of separation has also been presented.

Tetraphenylethylene-functionalized hexaphenylbenzene with unique conformation-driven selectivity for gas chromatographic separations

Tetraphenylethylene-functionalized hexaphenylbenzene composed of a neat aromatic hydrocarbon with unique conformation-driven selectivity for gas chromatographic separations.

Evolution and Evaluation of GC Columns

A chromatographic column is the fundamental element required for gas-chromatographic analysis. The separation of components coming from complex mixtures, prior to their detection was leading to a prominent revolution in different areas of science. Moreover, current advances in gas chromatographic (GC) columns technology and development have been providing almost unlimited possibilities for analysis employing diverse matrices. We aim through this review article to describe the evolution of chromatographic columns, by pointing the most important stages, as well as the new trends and future perspectives predicted for the new generation of GC columns. Furthermore, it was in our scope to present the main fundamentals regarding the theoretical relationships that describe the chromatographic separation, to introduce concepts related to columns selection in accordance with the required application as well as to discuss the available evaluation parameters for columns efficiency. Consequently, the early stages of first columns preparation up to the development of GC capillary columns used nowadays, together with examples of their applications are also reported and described in detail.

High-resolution performance of triptycene functionalized with polycaprolactones for gas chromatography

Developing highly selective stationary phases is essential to address the issues for separation of analytes with similar properties and various components in complex samples. Herein, we report a new triptycene-based material functionalized with polycaprolactone moieties (TP-PCL) as the stationary phase with high-resolution performance for gas chromatography (GC). The TP-PCL capillary column exhibited column efficiency of 5555 plates/m and moderate polarity. On the column, dozens of mixtures of positional and structural isomers can be well resolved, involving benzene derivatives with varying substituents (alkyl, halo, nitro, hydroxyl, amino), naphthalene derivatives, alkanes and alcohols. It exhibits advantageous performance for high resolution of the critical pairs of alkylbenzenes, phenols, anilines and alkanes over the PCL column and commercial DB-35 MS column with similar polarity. Moreover, the TP-PCL column showed excellent separation repeatability and reproducibility with RSD values of 0.02%-0.07% for run-to-run (n = 4), 0.11%-0.18% for day-to-day (n = 4) and 2.1%-4.7% for column-to-column (n = 4). In addition, it exhibited distinctly enhanced thermal stability in contrast to the PCL column. Its application to analysis of the essential oil from Artemisiae argyi proves its good potential for practical use.

Adenine-functionalized polypropylene glycol: A novel stationary phase for gas chromatography offering good inertness for acids and bases combined with a unique selectivity

This work presents the investigation of utilizing adenine-functionalized polypropylene glycol (APPG) for capillary gas chromatographic separations. The statically coated APPG column (0.25 mm i.d.) showed moderate polarity and high column efficiencies of 4660 plates/m and 4376 plates/m determined by n-octanol and naphthalene, respectively. Remarkably, the APPG column baseline resolved all the components of the Grob test mixture and displayed good peak shapes for some stringent analytes that are prone to peak tailing or severe adsorption. Also, it achieved complete separation of dimethylaniline isomers, which are difficult to be resolved due to their high resemblance in structures and properties. The above results demonstrate the high selectivity and inertness of the APPG column and its distinct advantages over the polypropylene glycol (PPG) column and commercial polyethylene glycol (PEG) column. In addition, its separation performance has good repeatability with the RSD values on retention times below 0.05% for run-to-run, 0.11-0.12% for day-to-day and 1.7-1.9% for column-to-column, respectively. Further, the APPG column was applied to determination of isomer impurities in commercial dimethylaniline products and to determination of the additives of anilines and phenols in a hair-dye product, proving its great potential for practical GC analysis.

A metal organic framework polymer monolithic column as a novel adsorbent for on-line solid phase extraction and determination of ursolic acid in Chinese herbal medicine

A metal organic framework (MOF)-polymer monolithic column was prepared by redox initiation using modified MOF and N-methylolacrylamide (NMA) as co-monomers. The obtained monolithic column was characterized by scanning electron microscopy (SEM) and nitrogen adsorption-desorption isotherm measurement. It was used as a solid phase extraction (SPE) absorbent for the online enrichment of ursolic acid (UA) by high performance liquid chromatography. The adsorption amount of UA on the monolith was compared with that of silica gel-C18 adsorbent and the monolith without MOF material. The MOF-polymer monolithic column showed high selectivity and good permeability. Under the optimum conditions for extraction and determination, the calibration equation was y = 79.854× + 0.1939; the linear range was 0.001-0.9 mg/mL; the linear regression coefficient was 0.9993; the limit of detection (LOD) and the limit of quantification (LOQ) were 0.17 μg/mL and 0.57 μg/mL, respectively; the inter-day and intra-day accuracies were <6.44%; the recovery was in the range of 86.52-105.26%. The MOF-polymer monolithic column was successfully used as SPE column for enrichment and determination of UA in Chinese herbal medicine.

A porous aromatic framework as a versatile fiber coating for solid-phase microextraction of polar and nonpolar aromatic organic compounds

A porous aromatic framework (PAF) derived from triphenylamine (type PAF-41) was prepared and is shown to be a viable coating for fibrous solid-phase microextraction (SPME). PAF-41 can be easily synthesized and has a high surface area, a rich π-electron structure, and electron-rich nitrogen atoms in its framework. The PAF-41-coated fibrous SPME extractor was combined with a gas chromatographic separation and flame ionization detection. The method was applied to the quantitation of some aromatic organic compounds (AOCs), including polar amphetamine and methamphetamine and nonpolar ethylbenzene, o-, m- and p-xylenes, and styrene. The method was optimized after which a linear response is found for the 10-500 ng·mL^-1 amphetamine and methamphetamine concentration ranges. The limits of detection are 1.0 and 0.5 ng·mL^-1; and relative standard deviations for six repeated extractions with a single fiber are 5.3 and 6.7%. The method was applied for the determination of amphetamine and methamphetamine in spiked urine samples without any pretreatment except for dilution with water. The PAF-41 modified fiber also was applied to the extraction of styrene, xylenes and ethylbenzene. The enrichment capacities of the extractor for these AOCs were superior to those of commercial SPME extractors. Graphical abstract (a) Schemetic of the PAF-41-coated solid-phase microextraction (SPME) fiber. (b) Scanning electron microscope images of the PAF-41 fiber.

Metal-Organic Frameworks in Green Analytical Chemistry

Metal-organic frameworks (MOFs) are porous hybrid materials composed of metal ions and organic linkers, characterized by their crystallinity and by the highest known surface areas. MOFs structures present accessible cages, tunnels and modifiable pores, together with adequate mechanical and thermal stability. Their outstanding properties have led to their recognition as revolutionary materials in recent years. Analytical chemistry has also benefited from the potential of MOF applications. MOFs succeed as sorbent materials in extraction and microextraction procedures, as sensors, and as stationary or pseudo-stationary phases in chromatographic systems. To date, around 100 different MOFs form part of those analytical applications. This review intends to give an overview on the use of MOFs in analytical chemistry in recent years (2017–2019) within the framework of green analytical chemistry requirements, with a particular emphasis on possible toxicity issues of neat MOFs and trends to ensure green approaches in their preparation.

Well-Defined Materials for High-Performance Chromatographic Separation

Chromatographic separation has been widely applied in various fields, such as chemical engineering, precision medicine, energy, and biology. Because chromatographic separation is based on differential partitioning between the mobile phase and stationary phase and affected by band dispersion and mass transfer resistance from these two phases, the materials used as the stationary phase play a decisive role in separation performance. In this review, we discuss the design of separation materials to achieve the separation with high efficiency and high resolution and highlight the well-defined materials with uniform pore structure and unique properties. The achievements, recent developments, challenges, and future trends of such materials are discussed. Furthermore, the surface functionalization of separation ma-terials for further improvement of separation performance is reviewed. Finally, future research directions and the challenges of chromatographic separation are presented.

Amphiphilic triptycene-based stationary phase for high-resolution gas chromatographic separations

This work reports a new type of triptycene-based amphiphilic stationary phase (TP-2IL) for gas chromatography (GC). It is an integration of the 3D π-rich triptycene framework with ionic liquids. Its capillary column showed the efficiency of 3880 plates/m determined by n-dodecane at 120 °C (k = 2.79) and exhibited good performance for analytes from apolar to polar nature. Particularly, it has outstanding capability for resolving critical pairs of anilines and phenols with good peak shapes and shows distinct advantages over its composing counterparts (TP-2BO and O-IL) and widely-used commercial columns, namely 35% phenyl methyl polysiloxane (DB-35) and polyethylene glycol (INNOWAX). Moreover, the TP-2IL column exhibited good repeatability and reproducibility with the values of relative standard deviation in the range of 0.02%-0.07% for run-to-run, 0.10%-0.35% for day-to-day and 2.9%-5.1% for column-to-column, respectively, and good thermal stability up to 300 °C. Furthermore, its applications for determining isomer impurities in real samples demonstrate its feasibility for practical GC analysis. This work presents a facile strategy for constructing triptycene-based stationary phases with amphiphilic selectivity and provides alternatives of highly selective stationary phases for chromatographic analysis.

Core-Shell Metal-Organic Frameworks as the Mixed-Mode Stationary Phase for Hydrophilic Interaction/Reversed-Phase Chromatography

Stationary phases with mixed-mode mechanisms have emerged as a hot research topic. In the present research, monodisperse core-shell UiO-67@SiO₂ materials were prepared and further served as the packed column for mixed-mode hydrophilic interaction liquid chromatography/reversed-phase liquid chromatography. The developed UiO-67@SiO₂ materials were characterized via thermogravimetric analysis, scanning electron microscopy, X-ray Powder diffraction, and Fourier transform infrared techniques. The developed UiO-67@SiO₂ column shows flexible selectivity for separation of both hydrophobic (anilines, alkylbenzenes, and polycyclic aromatic hydrocarbons) and hydrophilic (thioureas) compounds. Furthermore, the UiO-67@SiO₂ column was also utilized to characterize potential pollutants in lake water samples. In summary, the UiO-67@SiO₂ column provided flexible selectivity and wide-range retention behaviors for both hydrophilic and hydrophobic analytes.

MIL-PVDF blend ultrafiltration membranes with ultrahigh MOF loading for simultaneous adsorption and catalytic oxidation of methylene blue

Multifunctional ultrafiltration membranes need to be further developed with ultrafiltration performance and high multifunctional decontamination efficiency. Here, the MIL-PVDF multifunctional ultrafiltration membrane with ultrahigh MIL loading was demonstrated by a new blending method of predispersion in acetone and thermally induced phase separation. Due to the improved dispersity and restriction of pore size, the MIL-53(Fe) mass loading was as high as approximately 61%. The new membrane showed high performance for methylene blue (MB) removal and maintained high permeability and ultrafiltration efficiency. The characteristics of the membranes were analyzed to explain the above advantages. Meanwhile, compared to the traditional blend ultrafiltration membrane, the 67-MIL-PVDF membrane showed an 9-fold increase in effective treatment volume for more than 75% MB removal. The contribution and efficiency of adsorption and catalytic oxidation were analyzed and explained. The relationship between them was confirmed as being independent, and the reasons for this independence were proposed. Additionally, the mechanism of multifunctional decontamination and permeability by MIL-PVDF membranes was proposed. Moreover, the 67-MIL-PVDF membrane was also suitable for long-term run and real wastewaters treatment. In conclusion, this study sheds new light on the preparation strategy for multifunctional blend ultrafiltration membranes with ultrahigh particles loading displaying high decontamination and permeability performance.

Application of a Pillared-Layer Zn-Triazolate Metal-Organic Framework in the Dispersive Miniaturized Solid-Phase Extraction of Personal Care Products from Wastewater Samples

The pillared-layer Zn-triazolate metal-organic framework (CIM-81) was synthesized, characterized, and used for the first time as a sorbent in a dispersive micro-solid phase extraction method. The method involves the determination of a variety of personal care products in wastewaters, including four preservatives, four UV-filters, and one disinfectant, in combination with ultra-high performance liquid chromatography and UV detection. The CIM-81 MOF, constructed with an interesting mixed-ligand synthetic strategy, demonstrated a better extraction performance than other widely used MOFs in D-µSPE such as UiO-66, HKUST-1, and MIL-53(Al). The optimization of the method included a screening design followed by a Doehlert design. Optimum conditions required 10 mg of CIM-81 MOF in 10 mL of the aqueous sample at a pH of 5, 1 min of agitation by vortex and 3 min of centrifugation in the extraction step; and 1.2 mL of methanol and 4 min of vortex in the desorption step, followed by filtration, evaporation and reconstitution with 100 µL of the initial chromatographic mobile phase. The entire D-µSPE-UHPLC-UV method presented limits of detection down to 0.5 ng·mL-1; intra-day and inter-day precision values for the lowest concentration level (15 ng·mL-1)-as a relative standard deviation (in %)-lower than 8.7 and 13%, respectively; average relative recovery values of 115%; and enrichment factors ranging from ~3.6 to ~34. The reuse of the CIM-81 material was assessed not only in terms of maintaining the analytical performance but also in terms of its crystalline stability.

Emerging porous materials in confined spaces: from chromatographic applications to flow chemistry

Porous materials confined within capillary columns/microfluidic devices are discussed, and progress in chromatographic and membrane separations and catalysis is reviewed.

Excess adsorption of acetonitrile and water on MIL-100(Fe) and its potential application in mixed-mode chromatography

Potential application of MIL-100(Fe) to reversed- and-normal phase mixed-mode chromatography was suggested.

Reversible and Vapochromic Chemisorption of Ammonia by a Copper(II) Coordination Polymer

The single crystal X-ray structure determination of {[Cu(tpt)(o-phthalate)]·31/3(C2H2Cl4)}n (tpt=2,4,6-tri-4-pyridyl-1,3,5-triazine, C2H2Cl4=1,1,2,2-tetrachloroethane=TCE) shows a 3D network in which CuII centres are linked by 3-connecting tpt ligands with the topology of a 12,3 net. CuII centres are further linked by o-phthalate dianions. The copper coordination geometry is square pyramidal, with o-phthalate oxygen donors trans to each other in the basal plane and the remaining positions taken by the pyridines of three linking tpt units. The solvent accessible void space is ~65%. The pale blue-green crystalline desolvate, obtained by heating to 200°C or washing the TCE solvate with acetone is formulated as [Cu(tpt)(o-phthalate)]n. Powder X-ray diffraction and electron paramagnetic resonance spectroscopy show that the crystal structure and the CuII geometry changes upon desolvation. The crystalline desolvated phase sorbs two equivalents of ammonia per copper ion. The adduct, mauve [Cu(tpt)(o-phthalate)(NH3)2]n, shows reasonable crystallinity and is stable up to ~150°C under ambient conditions before the reversible desorption (minimum 10 cycles) of the guest ammonia. The colour change and high desorption temperature, along with changes in g values, is suggestive of chemisorption in two steps with Cu–ammine bonding in the loaded phase.

Aptamer-modified magnetic metal-organic framework MIL-101 for highly efficient and selective enrichment of ochratoxin A

A facile and efficient strategy is developed to modify aptamers on the surface of the magnetic metal-organic framework MIL-101 for the rapid magnetic solid-phase extraction of ochratoxin A. To the best of our knowledge, this is the first attempt to create a robust aptamer-modified magnetic MIL-101 with covalent bonding for the magnetic separation and enrichment of ochratoxin A. The saturated adsorption of ochratoxin A by aptamer-modified magnetic MIL-101 was 7.9 times greater than that by magnetic metal-organic framework MIL-101 due to the former's high selective recognition as well as good stability. It could be used for extraction more than 12 times with no significant changes in the extraction efficiency. An aptamer-modified magnetic MIL-101-based method of magnetic solid-phase extraction combined with ultra high performance liquid chromatography with tandem mass spectrometry was developed for the determination of trace ochratoxin A with limit of detection of 0.067 ng/L. Ochratoxin A of 4.53-13.7 ng/kg was determined in corn and peanut samples. The recoveries were in the range 82.8-108% with a relative standard deviation (n = 5) of 4.5-6.5%. These results show that aptamer-modified magnetic MIL-101 exhibits selective and effective enrichment performance and have excellent potential for the analysis of ultra-trace targets from complex matrices.

Porous Organic Frameworks: Advanced Materials in Analytical Chemistry

Porous organic frameworks (POFs), a general term for covalent-organic frameworks (COFs), covalent triazine frameworks (CTFs), porous aromatic frameworks (PAFs), etc., are constructed from organic building monomers with strong covalent bonds and have generated great interest among researchers. The remarkable features, such as large surface areas, permanent porosity, high thermal and chemical stability, and convenient functionalization, promote the great potential of POFs in diverse applications. A critical overview of the important development in the design and synthesis of COFs, CTFs, and PAFs is provided and their state-of-the-art applications in analytical chemistry are discussed. POFs and their functional composites have been explored as advanced materials in "turn-off" or "turn-on" fluorescence detection and novel stationary phases for chromatographic separation, as well as a promising adsorbent for sample preparation methods. In addition, the prospects for the synthesis and utilization of POFs in analytical chemistry are also presented. These prospects can offer an outlook and reference for further study of the applications of POFs.

Recent development trends for chiral stationary phases based on chitosan derivatives, cyclofructan derivatives and chiral porous materials in high performance liquid chromatography

The separation of enantiomers by chromatographic methods, such as gas chromatography, high-performance liquid chromatography and capillary electrochromatography, has become an increasingly significant challenge over the past few decades due to the demand of pharmaceutical, agrochemical, and food analysis. Among these chromatographic resolution methods, high-performance liquid chromatography based on chiral stationary phases has become the most popular and effective method used for the analytical and preparative separation of optically active compounds. This review mainly focuses on the recent development trends for novel chiral stationary phases based on chitosan derivatives, cyclofructan derivatives, and chiral porous materials that include metal-organic frameworks and covalent organic frameworks in high-performance liquid chromatography. The enantioseparation performance and chiral recognition mechanisms of these newly developed chiral selectors toward enantiomers are discussed in detail.

Open-tubular capillary electrochromatographic determination of ten sulfonamides in tap water and milk by a metal-organic framework-coated capillary column

In this study, a metal-organic framework (MOF), [Mn(cam)(bpy)], was synthesized and characterized by thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectrometry. An open-tubular capillary column was fabricated from [Mn(cam)(bpy)] via the amide coupling method. Ten types of sulfonamides were separated through the fabricated capillary column, which showed a good limits of detection (<0.07 μg/mL) and linear ranges (1-100 or 5-100 μg/mL) with a high correlation coefficients (R² > 0.9987). The intra-day, inter-day and column-to-column relative standard deviations (RSDs) in the migration times ranged from 0.44 to 4.87%, and the peak area RSDs ranged from 0.80 to 7.28%. The developed capillary electrochromatography method can be successfully utilized for the determination of sulfonamides in tap water and milk samples.