Mechanisms of pattern formation from dried sessile drops

Evaporation and deposition of inclined colloidal droplets

Colloidal droplets on flat solid substrates commonly leave symmetric ring-like deposits due to coffee-ring flows during evaporation. On inclined substrates, droplet shapes may become asymmetric by gravity. On this basis, it is not clear how their evaporation dynamics and final deposits are changed depending on inclination. Here we explore evaporation and deposition dynamics of colloidal droplets on inclined substrates, mainly by controlling colloidal particle size, substrate inclination, and relative humidity, which are crucial to gravitational intervention and evaporation dynamics. We experimentally investigate two different flows with opposite directions: downward sedimentation flows by gravity (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v_s$$\end{document}vs) and upward capillary flows by evaporation (\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$v_c$$\end{document}vc). We find that the competition of two flows determines the formation of final deposits with a flow speed ratio of \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha = v_s/v_c$$\end{document}α=vs/vc. Notably, for \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\alpha$$\end{document}α\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\ll$$\end{document}≪ 1, evaporation-driven upward flows overwhelm sedimentation-driven downward flows, resulting in accentuated particle movement towards the top ring, which seems to defy gravitational intervention. We suggest a possible explanation for the flow speed dependence of final deposits in evaporating colloidal droplets. This study offers a framework to understand the intervention of inclination to the formation of final deposits and how to overcome the deposit pattern radial asymmetry, achieving symmetric deposit widths from inclined colloidal droplets.

Water evaporation from solute-containing aerosol droplets: Effects of internal concentration and diffusivity profiles and onset of crust formation

The evaporation of droplets is an important process not only in industrial and scientific applications, but also in the airborne transmission of viruses and other infectious agents. We derive analytical and semi-analytical solutions of the coupled heat and mass diffusion equations within a spherical droplet and in the ambient vapor phase that describe the evaporation process of aqueous free droplets containing nonvolatile solutes. Our results demonstrate that the solute-induced water vapor-pressure reduction considerably slows down the evaporation process and dominates the solute-concentration dependence of the droplet evaporation time. The evaporation-induced enhanced solute concentration near the droplet surface, which is accounted for using a two-stage evaporation description, is found to further slow-down the drying process. On the other hand, the presence of solutes is found to produce a lower limit for the droplet size that can be reached by evaporation and, also, to reduce evaporation cooling of the droplet, which tend to decrease the evaporation time. Overall, the first two effects are dominant, meaning that the droplet evaporation time increases in the presence of solutes. Local variation of the water diffusivity inside the droplet near its surface, which is a consequence of the solute-concentration dependence of the diffusion coefficient, does not significantly change the evaporation time. Crust formation on the droplet surface increases the final equilibrium size of the droplet by producing a hollow spherical particle, the outer radius of which is determined as well.

Pattern formation in drying blood drops

Patterns in dried droplets are commonly observed as rings left after spills of dirty water or coffee have evaporated. Patterns are also seen in dried blood droplets and the patterns have been shown to differ from patients afflicted with different medical conditions. This has been proposed as the basis for a new generation of low-cost blood diagnostics. Before these diagnostics can be widely used, the underlying mechanisms leading to pattern formation in these systems must be understood. We analyse the height profile and appearance of dispersions prepared with red blood cells (RBCs) from healthy donors. The red cell concentrations and diluent were varied and compared with simple polystyrene particle systems to identify the dominant mechanistic variables. Typically, a high concentration of non-volatile components suppresses ring formation. However, RBC suspensions display a greater volume of edge deposition when the red cell concentration is higher. This discrepancy is caused by the consolidation front halting during drying for most blood suspensions. This prevents the standard horizontal drying mechanism and leads to two clearly defined regions in final crack patterns and height profile. This article is part of a discussion meeting issue 'A cracking approach to inventing new tough materials: fracture stranger than friction'.

Pattern Formation upon Evaporation of Sessile Droplets of Polyelectrolyte/Surfactant Mixtures on Silicon Wafers

The formation of coffee-ring deposits upon evaporation of sessile droplets containing mixtures of poly(diallyldimethylammonium chloride) (PDADMAC) and two different anionic surfactants were studied. This process is driven by the Marangoni stresses resulting from the formation of surface-active polyelectrolyte-surfactant complexes in solution and the salt arising from the release of counterions. The morphologies of the deposits appear to be dependent on the surfactant concentration, independent of their chemical nature, and consist of a peripheral coffee ring composed of PDADMAC and PDADMAC-surfactant complexes, and a secondary region of dendrite-like structures of pure NaCl at the interior of the residue formed at the end of the evaporation. This is compatible with a hydrodynamic flow associated with the Marangoni stress from the apex of the drop to the three-phase contact line for those cases in which the concentration of the complexes dominates the surface tension, whereas it is reversed when most of the PDADMAC and the complexes have been deposited at the rim and the bulk contains mainly salt.

Unclonable Micro-Texture with Clonable Micro-Shape towards Rapid, Convenient, and Low-Cost Fluorescent Anti-Counterfeiting Labels

An ideal anti-counterfeiting label not only needs to be unclonable and accurate but also must consider cost and efficiency. But the traditional physical unclonable function (PUF) recognition technology must match all the images in a database one by one. The matching time increases with the number of samples. Here, a new kind of PUF anti-counterfeiting label is introduced with high modifiability, low reagent cost (2.1 × 10^-4 USD), simple and fast authentication (overall time 12.17 s), high encoding capacity (2.1 × 10⁶²³ ), and its identification software. All inorganic perovskite nanocrystalline films with clonable micro-profile and unclonable micro-texture are prepared by laser engraving for lyophilic patterning, liquid strip sliding for high throughput droplet generation, and evaporative self-assembling for thin film deposition. A variety of crystal film profile shapes can be used as "specificator" for image recognition, and the verification time of recognition technology based on this divide-and-conquer strategy can be decreased by more than 20 times.

Evaporation-induced alterations in oscillation and flow characteristics of a sessile droplet on a rose-mimetic surface

Strategic control of evaporation dynamics can help control oscillation modes and internal flow field in an oscillating sessile droplet. This article presents the study of an oscillating droplet on a bio-inspired "sticky" surface to better understand the nexus between the modes of evaporation and oscillation. Oscillation in droplets can be characterized by the number of nodes forming on the surface and is referred to as the mode of oscillation. An evaporating sessile droplet under constant periodic perturbation naturally self-tunes between different oscillation modes depending on its geometry. The droplet geometry evolves according to the mode of evaporation controlled by substrate topography. We use a bio-inspired, rose patterned, "sticky" hydrophobic substrate to perpetually pin the contact line of the droplet in order to hence achieve a single mode of evaporation for most of the droplet's lifetime. This allows the prediction of experimentally observed oscillation mode transitions at different excitation frequencies. We present simple scaling arguments to predict the velocity of the internal flow induced by the oscillation. The findings are beneficial to applications which seek to tailor energy and mass transfer rates across liquid droplets by using bio-inspired surfaces.

Droplet evaporation residue indicating SARS-COV-2 survivability on surfaces

We conducted a systematic investigation of droplet evaporation on different surfaces. We found that droplets formed even with distilled water do not disappear with evaporation but instead shrink to a residue of a few micrometers lasting over 24 h. The residue formation process differs across surfaces and humidity levels. Specifically, under 40% relative humidity, 80% of droplets form residues on plastic and uncoated and coated glass, while less than 20% form on stainless steel and none on copper. The formation of residues and their variability are explained by modeling the evaporation process considering the presence of nonvolatile solutes on substrates and substrate thermal conductivity. Such variability is consistent with the survivability of SARS-CoV-2 measured on these surfaces. We hypothesize that these long-lasting microscale residues can potentially insulate the virus against environmental changes, allowing them to survive and remain infectious for extended durations.

Wettability-defined droplet imbibition in ceramic mesopores

Wettability-defined liquid infiltration into porous materials in nature and several industrial applications is of fundamental interest. Direct observation of wetting-controlled imbibition in mesopores is anticipated to deliver important insights into the interplay between nanoconfined liquid movement and nanoscale wettability. We present a systematic study of water imbibition into mesoporous silica thin films with wetting properties precisely adjusted through chemical functionalization. We observe the liquid infiltration, resulting in an imbibition ring around the water droplet, by top-view imaging using a camera with collimated coaxial illumination. With decreasing hydrophilicity, the maximum imbibition area around the droplet decreases, accompanied by a simultaneous change in the imbibition kinetics and imbibition mechanism. Initially, the imbibition kinetics follow a modified Lucas-Washburn law that considers a strong influence of evaporation. However, with increasing imbibition time after reaching constant imbibition ring dimensions, the imbibition area starts to increase again, causing a deviation from the applied model. This observation is ascribed to water-mediated surface activation at the imbibition front, leading to a slightly increased wettability, which is also confirmed by water adsorption measurements. Furthermore, recently described spontaneous condensation-evaporation imbalances that cause oscillations of the imbibition front could be verified and were studied with regard to changing wetting properties. By increasing the contact angle of the material and therefore the partial pressure needed for capillary condensation, the amplitude of the imbibition front oscillations decreases. These results provide insights into the wettability-defined complex movement of water in mesoporous structures, which has practical implications, e.g., for nano/microfluidic devices and water purification or harvesting.

Ring patterns generated by an expanding colloidal meniscus

The drop-and-dry is a common technique allowing for creation of periodic nanoparticle (NP) structures for sensing, photonics, catalysis, etc. However, the reproducibility and scalability of this approach for fabrication of NP-based structures faces serious challenges due to the complexity of the simple, at first glance, evaporation process. In this work we study the effect of the spatial confinement on the NP self-assembly under slow solvent evaporation, when the air-liquid-substrate contact line (CL) expands from the center towards the walls of a cylindrical cell, forming a toroid. Using in situ video monitoring of the stick-slip CL motion, we find regular hydrodynamic perturbations in the meniscus, and reveal fine details of the formation of quasiperiodic rings of close packed NP layers. We report that drying of the toroidal NP droplet has a number of important differences from drying of the classical hemispherical colloidal drops. In toroidal drops we observe linear-in-time average meniscus motion, in contrast to the hemispherical drops where the meniscus moves as a square root of time. While both droplet geometries produce NP ring patterns, the ring width for the toroidal drop decreases with increasing ring radius, while it decreases with decreasing the radius of the hemispherical drop. We suggest that free ligands are the main cause of the Marangoni instabilities driving the periodic vorticity in the meniscus. In addition, we show that the usually ignored contact line tension may yield a considerable contribution to the CL pinning causing the CL slip-stick motion and the ring formation.

Applying droplets and films in evaporative lithography

This review covers experimental results of evaporative lithography and analyzes existing mathematical models of this method. Evaporating droplets and films are used in different fields, such as cooling of heated surfaces of electronic devices, diagnostics in health care, creation of transparent conductive coatings on flexible substrates, and surface patterning. A method called evaporative lithography emerged after the connection between the coffee ring effect taking place in drying colloidal droplets and naturally occurring inhomogeneous vapor flux densities from liquid-vapor interfaces was established. Essential control of the colloidal particle deposit patterns is achieved in this method by producing ambient conditions that induce a nonuniform evaporation profile from the colloidal liquid surface. Evaporative lithography is part of a wider field known as "evaporative-induced self-assembly" (EISA). EISA involves methods based on contact line processes, methods employing particle interaction effects, and evaporative lithography. As a rule, evaporative lithography is a flexible and single-stage process with such advantages as simplicity, low price, and the possibility of application to almost any substrate without pretreatment. Since there is no mechanical impact on the template in evaporative lithography, the template integrity is preserved in the process. The method is also useful for creating materials with localized functions, such as slipperiness and self-healing. For these reasons, evaporative lithography attracts increasing attention and has a number of noticeable achievements at present. We also analyze limitations of the approach and ways of its further development.

Self-Assembly of Nanoparticles from Evaporating Sessile Droplets: Fresh Look into the Role of Particle/Substrate Interaction

We studied the dependence of solid deposit shape obtained by free drying of sessile drops on particle concentration and Derjaguin-Landau-Verwey-Overbeek (DLVO) particle/substrate interaction. In contrast to previous contributions using pH as a control parameter of interactions, we investigated an unprecedentedly wide range of concentrations and particle/substrate DLVO forces by modifying the nature of the substrate and particles as well as their size and surface chemistry, whereas long-distance repulsive interactions between particles were maintained for most of the drying time. Our main result is that the different shapes of deposits obtained by modifying the particle concentration are the same in the different regimes of concentration regardless of particle/substrate interaction in the studied range of DLVO forces and particle concentrations. The second result is that, contrary to expectations, the dominant morphology of dry patterns at low particle concentration always shows a dotlike pattern for all the studied systems.

Investigating the Effect of Antibody-Antigen Reactions on the Internal Convection in a Sessile Droplet via Microparticle Image Velocimetry and DLVO Analysis

The evaporation of antigen-laden sessile droplets on antibody-immobilized PDMS substrates could be used in place of microwells for detection purposes owing to the lesser requirements of analytes and a reduced reaction time. To develop such techniques, the effects of different parameters on the reaction efficiency and on the resulting deposition patterns of antigens on the surface after evaporation need to be well understood. While the resultant deposition patterns from the evaporation of droplets of biological fluids on surfaces are being studied for various biomedical applications, systems where the analyte of interest in the droplet binds to the surface have not been investigated until now. While the effect of temperature on the internal convection within sessile droplets has been studied, the effect of the analyte (antigen in this work) concentration and the analyte-surface (antigen-antibody in this work) binding on the internal convection has not been studied until now. Therefore, to gain insight, the evaporation dynamics of sessile droplets with different concentrations of antigens along with polystyrene microspheres (used as tracers) in phosphate-buffered saline (PBS) on antibody-immobilized PDMS substrates were experimentally studied using microparticle image velocimetry (PIV). It was found that Marangoni flow due to concentration gradients and surface reactions was responsible for the observed velocity field. The antibody-antigen reaction (as compared to the control case of no surface reaction) and higher concentrations of prostate specific antigen (PSA) resulted in increased strength of Marangoni convection. To obtain further insight into the different deposition patterns obtained, the contributions of different particle-particle and particle-substrate forces were determined, and it was observed that the Marangoni forces along with surface tension and DLVO forces create a uniform deposition of the particles present within the droplet. This learning could be used to design biosensors.

Morphological Control of Linear Particle Deposits from the Drying of Inkjet-Printed Rivulets

We studied the morphology of linear particle deposits obtained by inkjet printing of a silica nanoparticle suspension in drying conditions where contact line depinning occurs. We show that this evaporation mode can be obtained by adjusting the particle concentration in different solvents. For isolated drops, deposited manually or by inkjet printing, drying induces the formation of two concentric rings in which particles self-assemble into a monolayer. For fused drops, our main result is that stable rivulets could be formed by drop overlap leading, after drying, to the formation of three parallel lines composed of a self-assembled particle monolayer. The three lines are of homogeneous thickness with two very thin outer lines (∼1 μm width) and a wider central line (∼20 μm width). We reveal how the width of the resulting lines is influenced by drop spacing in a predictable manner for a large experimental window knowing the drop size.

Hydrophobicity of abiotic surfaces governs droplets deposition and evaporation patterns

Surface contamination with droplets containing bacteria is of concern in the food industry and other environments where hygiene control is essential. Deposition patterns after the drying of contaminated droplets is affected by numerous parameters. The present study evaluated the rate of evaporation and the shape of deposition patterns after the drying of water droplets on a panel of materials with different surface properties (topography, hydrophobicity). The influence of the particle properties (in this study 1 μm-microspheres and two bacterial spores) was also investigated. Polystyrene microspheres were hydrophobic, while Bacillus spores were hydrophilic or hydrophobic, and surrounded by different surface features. In contrast to material topography, hydrophobicity was shown to deeply affect droplet evaporation, with the formation of small, thick deposits with microspheres or hydrophilic spores. Among the particle properties, the spore morphology (size and round/ovoid shape) did not clearly affect the deposition pattern. Conversely, hydrophobic spores aggregated to form clusters, which quickly settled on the materials and either failed to migrate, or only migrated to a slight extent on the surface, resulting in a steady distribution of spores or spore clusters over the whole contaminated area. Adherent bacteria or spores are known to be highly resistant to many stressful environmental conditions. In view of all the quite different patterns obtained following drying of spore-containing droplets, it seems likely that some of these would entail enhanced resistance to hygienic processes.

A comparative study of the drying evolution and dried morphology of two globular proteins in de-ionized water solutions

Pattern formation in drying protein droplets continues to attract considerable research attention because it can be linked to specific protein-protein interactions. An extensive study of the drying evolution and the final crack patterns is presented, highlighting the concentration dependence (from 1 to 13 wt%) of two globular proteins, lysozyme (Lys) and bovine serum albumin (BSA), in de-ionized water. The drying evolution starts with a constant contact radius mode and shifts to a mixed mode where both fluid front and contact angle changes. The contact angle monotonically decreases, whereas, the fluid front exhibits two regimes: an initial linear regime and a later non-linear regime. Unlike the linear regime, the non-linear regime is faster for Lys droplets. This results in the formation of a "mound"-like structure in the central region. A new feature, a "dimple" is observed in this mound which is found to be dependent on the initial concentration. The different crack morphology of BSA and Lys depends strongly on the initial state of the solution and can be interpreted using a simple mechanical model. In fact, when dried under uniform conditions (surface, humidity, temperature, droplet diameter, etc.), the evolution and the final pattern displays as a fingerprint of the initial state.

Superspreading and Drying of Trisiloxane-Laden Quantum Dot Nanofluids on Hydrophobic Surfaces

Nanofluids hold promise for a wide range of areas of industry. However, understanding the wetting behavior and deposition formation in the course of drying and spreading of nanofluids, particularly containing surfactants, is still poor. In this paper, the evaporation dynamics of quantum dot-based nanofluids and evaporation-driven self-assembly in nanocolloidal suspensions on hexamethyldisilazane-, polystyrene-, and polypropylene-coated hydrophobic surfaces have been studied experimentally. Moreover, for the very first time, we make a step toward understanding the wetting dynamics of superspreader surfactant-laden nanofluids. It was revealed that drying of surfactant-free quantum dot nanofluids in contrast to pure liquids undergoes not three but four evaporation modes including last additional pinning mode when the contact angle decreases while the triple contact line is pinned by the nanocrystals. In contrast to previous studies, it was found out that addition of nanoparticles to aqueous surfactant solutions leads to deterioration of the spreading rate and to formation of a double coffee ring. For all surfaces examined, superspreading in the presence and absence of quantum dot nanoparticles takes place. Despite the formation of coffee rings on all substrates, they have different morphologies. In particular, the knot-like structures are incorporated into the ring on hexamethyldisilazane- and polystyrene-coated surfaces.

Deposition of nanoparticles from a volatile carrier liquid

HYPOTHESIS

Traversing length scales in a volatile suspension alters the various contributions to particle deposition from conjoining and disjoining surface forces and from convective and liquid evaporative effects, which is apparent in the deposit morphology.

EXPERIMENT

We investigate the particulate structures to result from the self-assembly of nanoparticles following the evaporation of a volatile carrier liquid from the level of the single particle and up to a level which is apparent to the naked eye, while quantifying the contributions of the main mechanisms that are involved in the deposition process.

FINDINGS

We show that from the level of the nanoparticles in our experiment and up to a length scale of approximately 10 μm, the morphology of the deposit is particularly sensitive to particle adhesion to the substrate and to liquid evaporation. At greater length scales, the morphology of the deposit is well correlated with the finite volume of particles and with particle convection effects. The particulate structures are in the form of detached particles and particle islands, stripes, and continuous coating, which may vary at different length scales of the same deposit.

Machine Learning Analysis for Quantitative Discrimination of Dried Blood Droplets

One of the most interesting and everyday natural phenomenon is the formation of different patterns after the evaporation of liquid droplets on a solid surface. The analysis of dried patterns from blood droplets has recently gained a lot of attention, experimentally and theoretically, due to its potential application in diagnostic medicine and forensic science. This paper presents evidence that images of dried blood droplets have a signature revealing the exhaustion level of the person, and discloses an entirely novel approach to studying human dried blood droplet patterns. We took blood samples from 30 healthy young male volunteers before and after exhaustive exercise, which is well known to cause large changes to blood chemistry. We objectively and quantitatively analysed 1800 images of dried blood droplets, developing sophisticated image processing analysis routines and optimising a multivariate statistical machine learning algorithm. We looked for statistically relevant correlations between the patterns in the dried blood droplets and exercise-induced changes in blood chemistry. An analysis of the various measured physiological parameters was also investigated. We found that when our machine learning algorithm, which optimises a statistical model combining Principal Component Analysis (PCA) as an unsupervised learning method and Linear Discriminant Analysis (LDA) as a supervised learning method, is applied on the logarithmic power spectrum of the images, it can provide up to 95% prediction accuracy, in discriminating the physiological conditions, i.e., before or after physical exercise. This correlation is strongest when all ten images taken per volunteer per condition are averaged, rather than treated individually. Having demonstrated proof-of-principle, this method can be applied to identify diseases.

Moses Effect: Splitting a Sessile Droplet Using a Vapor-Mediated Marangoni Effect Leading to Designer Surface Patterns

In this work, we showcase a mechanism of rapid and focused solvent depletion using vapor-mediated interaction that can nonintrusively cleave a sessile water droplet reminiscent of Moses parting the Red Sea. The Marangoni effect is induced by the differential adsorption of vapor from a nearby pendant droplet of ethanol, leading to an exponential increase in surface velocity inside the water droplet. The Marangoni convection leads to the drainage of liquid from the central section of the water droplet and consequently splits it. By encoding the position of the ethanol (vertical as well as horizontal) droplet, an array of liquid motion is observed (split, shift, and slosh) in the water droplet. This method is further extended to nanocolloidal systems, where the liquid motion can be exploited to generate a wide gamut of deposit patterns ranging from uniform precipitate to sporadic islands without resorting to the more traditional evaporation-driven capillary flows ("coffee stains") or custom engineering of the shape of the nanoparticles. We further provide a detailed exposition of the physical mechanisms responsible for the splitting of the liquid drop and consequent particle deposition. The concept can be extended to liquid actuation in open channel microfluidic chips and surface patterning as in medical diagnostics, optoelectronics, and thermal management.

Role of surfactant in controlling the deposition pattern of a particle-laden droplet: Fundamentals and strategies

Evaporation of particle-laden droplets has attracted wide attention propelled by the vast applications from disease diagnostics, bio-medicines, agriculture, inkjet printing to coating. Surfactant plays a vital role in controlling the deposition patterns of dried droplets, thanks to its extensive influences on particle transport through adsorbing at particle surface and droplet interfaces as well as suppressing or facilitating multiple flows. In order to accurately control the subtle morphology of a deposition, it is of significance to systematically elaborate the microscopic functions of surfactant, and bridge them to the various phenomena of a droplet. In this review, we first elucidate the effects of surfactant on the flow paradigms of capillary flow, solutal Marangoni flow, thermal Marangoni flow, and the mixed flow patterns as capillary force, thermal and solutal surface tensions are in competence or collaboration. Second, surfactant adsorption at particle surface and droplet interfaces modifying short-range and long-range forces such as electrostatic force, van der Waals force, capillary attraction, and hydrophobic bonding among particles and between particles and interfaces are introduced by the underlying mechanisms and approaches. Two phase diagrams are developed to respectively illustrate the roles of capillary force among particles, and the electrostatic interaction between particles and solid-liquid interface in modifying the deposition profiles. This review could build a fundamental framework of knowledge for evaporating particle-laden surfactant solution droplets, and may shed light on strategies to manipulate particle deposition in abundant fluidic-based techniques.

Positive and negative birefringence in packed films of binary spherical colloidal particles

We have investigated the birefringence in packed films of binary spherical colloidal particles. Particulate films were obtained by drying a mixed suspension of colloidal particles with two different diameters. We observed positive and negative birefringence depending on the diameters and volume ratios of the large and small particles. When the diameters of the large and small particles were similar, the films showed positive birefringence. However, negative birefringence or weakening of positive birefringence was observed in films with a large diameter ratio and an optimal volume fraction of large particles. The large particles were embedded in packed small particles in the negative and weakened positive birefringent films. We propose a packing structure in which a single shell layer of small particles formed around a large particle. Using this model, we estimated the required volume ratio of large particles, and it was in good agreement with the optimal volume fraction. The relation between the packing structure of the binary colloidal particles and the birefringence is discussed.

We have investigated the birefringence in packed films of binary spherical colloidal particles.

The solute mechanical properties impact on the drying of dairy and model colloidal systems

The evaporation of colloidal solutions is frequently observed in nature and in everyday life. The investigation of the mechanisms taking place during the desiccation of biological fluids is currently a scientific challenge with potential biomedical and industrial applications. In the last few decades, seminal works have been performed mostly on dried droplets of saliva, urine and plasma. However, the full understanding of the drying process in biocolloids is far from being achieved and, notably, the impact of solute properties on the morphological characteristics of the evaporating droplets, such as colloid segregation, skin formation and crack pattern development, is still to be elucidated. For this purpose, the use of model colloidal solutions, whose rheological behavior is more easily deducible, could represent a significant boost. In this work, we compare the drying of droplets of whey proteins and casein micelles, the two main milk protein classes, to that of dispersions of silica particles and polymer-coated silica particles, respectively. The mechanical behavior of such biological colloids and model silica dispersions was investigated through the analysis of crack formation, and the measurements of their mechanical properties using indentation testing. The study reveals numerous analogies between dairy and the corresponding model systems, thus confirming the latter as a plausible powerful tool to highlight the signature of the matter at the molecular scale during the drying process.

Wetting Transition at a Threshold Surfactant Concentration of Evaporating Sessile Droplets on a Patterned Surface

Wetting transitions induced by varying the components in a solution of a drying droplet can lead to its evolving shape on a textured surface. It can provide new insights on liquid pattern control through manipulating droplet solutions. We show the pronounced transitions of wetting for surfactant solution droplets drying on a micropyramid-patterned surface. At low initial surfactant concentrations, the droplet maintains an octagonal shape until the end of drying. At intermediate initial surfactant concentrations, the early octagon spreads to a square, which later evolves to a stretched rectangle. At high initial surfactant concentrations, the droplet mainly exhibits the "octagon-to-square" transition, and the square shape is maintained until the end. The octagon-to-square transition occurs at similar temporal volume-averaged surfactant concentrations for the various initial surfactant concentrations. It results from the dependence of the surface energy change of spread over the micropyramid structure on the temporal volume-averaged surfactant concentration. At high initial surfactant concentrations, the accumulation of the surfactant near the contact line driven by outward flows could raise the local viscosity and enhance the pinning effect, leading to the great suppression of the "square-to-rectangle" transition.

Patterning Bubbles by the Stick-Slip Motion of the Advancing Triple Phase Line on Nanostructures

The stick-slip motion of the triple phase contact line (TCL) has wide applications in inkjet printing, surface coatings, functional material assembly, and device fabrication. Here, for the first time, we report that on an alumina substrate with nanostructures, the stick-slip motion of the advancing TCL during spreading of an emulsion droplet can serve as an effective nanopatterning process. Air enclosed in the substrate nanostructures can be exchanged with liquid during the "stick" phase, resulting in the formation of bubbles arranged in a ring pattern. The process takes place in two stages: rings of air form first and then, as the volume of air increases, they separate into air bubbles as a result of the Plateau Rayleigh instability. During the first stage, the rings form due to the stick-slip of the advancing TCL and are ascribed to hydrogen-bonding interactions. Ultimate bubble size is dependent on the substrate pore dimensions. The process was simulated using finite-element analysis to elucidate the mechanism associated with subsequent bubble formation. The simulations corroborate well with the experimental results. This stick-slip motion of the advancing TCL provides new insights into the phenomena associated with droplet spreading and wetting, and the ability to control the formation of patterned bubbles will be promising in applications ranging from microfluidics to printing of functional materials and devices based on bubble templates and applications requiring submerged hydrophobic surface.