Effect of chitosan coating on the properties of nanoliposomes loaded with flaxseed-peptide fractions: Stability during spray-drying

Biopolymer-liposome hybrid systems for controlled delivery of bioactive compounds: Recent advances

Conventional liposomes still face many challenges associated with the poor physical and chemical stability, considerable loss of encapsulated cargo, lack of stimulus responsiveness, and rapid elimination from blood circulation. Integration of versatile functional biopolymers has emerged as an attractive strategy to overcome the limitation of usage of liposomes. This review comprehensively summarizes the most recent studies (2015-2020) and their challenges aiming at the exploration of biopolymer-liposome hybrid systems, including surface-modified liposomes, biopolymer-incorporated liposomes, guest-in-cyclodextrin-in-liposome, liposome-in-hydrogel, liposome-in-film, and liposome-in-nanofiber. The physicochemical principles and key technical information underlying the combined strategies for the fabrication of polymeric liposomes, the advantages and limitations of each of the systems, and the stabilization mechanisms are discussed through various case studies. Special emphasis is directed toward the synergistic efficiencies of biopolymers and phospholipid bilayers on encapsulation, protection, and controlled delivery of bioactives (e.g., vitamins, carotenoids, phenolics, peptides, and other health-related compounds) for the biomedical, pharmaceutical, cosmetic, and functional food applications. The major challenges, opportunities, and possible further developments for future studies are also highlighted.

Preparation, characterization and release behavior of chitosan-coated nanoliposomes (chitosomes) containing olive leaf extract optimized by response surface methodology

This study was dedicated to the optimization and preparation of chitosan-coated liposomes (chitosomes) as promising nanocarriers for retention of olive leaf extract optimized by Response surface methodology (RSM) based on central composite design. Accordingly, the best sample was chosen for further tests with the encapsulation efficiency, stability and electrical conductivity of 94%, 98% and 9.545 mS respectively. The average size of the optimal chitosome and nanoliposome were lower than 100 nm and the zeta potential was altered from a negative charge to positive after addition coating process with chitosan. Moreover, the differential scanning calorimetry of blank and loaded chitosome revealed the increase of fluidity and lower temperature of phase transition in loaded chitosome compared to blank one. FTIR spectra demonstrated that electrostatic interactions and hydrogen bonds occur between phospholipid polar groups, chitosan amine moieties and major olive leaf extract polyphenols including oleuropein and hydroxy tyrosol. Furthermore, the optimal loaded chitosome had the highest stability during 25 days at the temperature of 4 °C. Finally, the in vitro release tests were best fitted with Peppas-Sahlin and Kopcha models in food simulants and gastrointestinal simulated juice respectively revealing erosion-based release model.

Supplementary Information

The online version contains supplementary material available at (10.1007/s13197-021-04972-2).

Fractionation of Flaxseed-Derived Bioactive Peptides and Their Influence on Nanoliposomal Carriers

This study addressed the extraction, enzymatic hydrolysis, and production of peptide fractions (PF) from defatted flaxseed meal and their loading into nanoliposomes. Enzymatic hydrolysis significantly increased the free hydrophobic (from 19 to 134 mg/g) and antioxidant (from 8 to 46 mg/g) amino acids. The PF with lower molecular weights (MW < 10 kDa) had the highest scavenging capacity of DPPH^- free radicals (61.82%), ABTS⁺ (86.37%), Trolox equivalent antioxidant capacity, TEAC (2.34 mM), hydroxyl (61.91%), reducing power (0.94 Abs₇₀₀), total antioxidant activity (1.76 Abs₆₉₅), nitric oxide (49.9%), iron (69.34%), and copper (24.58%) chelating activities compared with other fractions. The physical properties (such as particle size and polydispersity index), stability, and encapsulation efficiency of nanoliposomes were affected by temperature, stress type (freeze and thaw tension), MW, and in vitro conditions (release of PF in simulated biological fluids at different times). Besides, the Fourier-transform infrared spectroscopy (FTIR) results showed the placement of peptides inside the polar regions and the bilayer membrane. The scanning electron microscopy (SEM) images of nanocarriers indicated agglomerated and relatively spherical structures. Our findings revealed the efficiency of nanoliposomes as appropriate carriers for the delivery of peptide fractions with the highest antioxidant activity.

Enhanced physicochemical stability of ω-3 PUFAs concentrates-loaded nanoliposomes decorated by chitosan/gelatin blend coatings

To enhance the physicochemical stability of ω-3 PUFAs concentrates from fish oil, biopolymer coating based on chitosan (CH) and gelatin (GE) deposited on the surface of nanoliposomes (NLs) has been synthesized and characterized. The mean particle size of surface-decorated nanoliposomes (SDNLs) containing ω-3 PUFAs concentrates was found to be in the range of 209.5-454.3 nm. Scanning and transmission electron microscopy revealed the spherical shape and smooth surface of the nanovesicles. Fourier-transform infrared spectroscopy and X-ray diffraction observations confirmed that the NLs have been successfully coated by biopolymeric blends. The highest entrapment efficiency of 81.6% was obtained in polymer-stabilized NLs with a concentration ratio of 0.3:0.1 (CH:GE). Differential scanning calorimetry results revealed enhanced thermal stability of vesicles after polymeric blend desorption. Finally, the oxidative stability assays demonstrated that the ω-3 PUFAs concentrates entrapped in SDNLs was protected against oxidation in comparison to the free ω-3 PUFAs concentrates.

A systematic review and meta-analysis of fish oil encapsulation within different micro/nanocarriers

Fish oil is one of the most important sources of omega 3 polyunsaturated fatty acids (PUFAs), especially eicosapentaenoic acid and docosahexaenoic acid which are the most important PUFAs with several health benefits. However, PUFAs are prone to oxidation and have a poor water solubility which limits the use of fish oils into food formulations. Encapsulation techniques can be applied to overcome these challenges. There is a large number of published micro/nanoencapsulation papers, where each of them contains a limited number of wall materials, feed formulation, encapsulation technique, and storage conditions. Therefore, without systematic evaluation of the data extracted from available studies, the design of functional foods containing fish oil would not be very successful. The objective of this systematic review is a meta-analysis of published researches on the nano/microencapsulation of fish oil. A comprehensive literature search was performed between 1 October and 31 December 2019 with encapsulation, fish oil, and oxidative stability keywords. Overall, 39 qualified articles were selected for the statistical analysis. Based on the technique used for encapsulation, the fish oil-loaded carriers were classified into four main groups: (a) spray-dried particles; (b) freeze-dried particles; (c) electrospun fibers and electrosprayed capsules; and (d) other carriers prepared by supercritical antisolvent, gelation, liposomes, spray-freeze drying, and transglutaminase catalyzed cross-linking. The three most frequent methods applied for fish oil encapsulation were spray drying (42.86%), freeze drying (21.43%), and electrohydrodynamic (19.04%) methods, respectively. Averagely, the best encapsulation efficiency was obtained for electrohydrodynamic processes. Also, the combination of polysaccharide-protein based wall materials provided the best performance in terms of fish oil encapsulation efficiency.

Microemulsions as nano-reactors for the solubilization, separation, purification and encapsulation of bioactive compounds

Bioactive components possess various functionalities and are most interested for different food, nutraceutical and pharmaceutical formulations. The current review will discuss the preparation methods and fabrication techniques to design microemulsions (MEs) for the solubilization, separation, encapsulation and purification of various agro-food bioactive compounds. ME systems have shown suitable potential in enhancing oil recovery, protein extraction, and isolation of bioactive compounds. Moreover, the capability of ME based systems as drug and nutraceutical delivery cargos, and synthesis of various organic and inorganic nanoparticles, especially using biopolymers, will be investigated. ME liquid membranes are also developed as nano-extractor/nano-reactor vehicles, capable of simultaneous extraction, encapsulation or even synthesis of hydrophilic and lipophilic bioactive compounds for food, nutraceutical and drug applications.

Carboxymethyl chitosan-decorated proliposomes as carriers for improved stability and sustained release of flaxseed oil

A flaxseed oil carboxymethyl chitosan-decorated proliposome system was fabricated in this research. The physicochemical characteristics, stability, and in vitro release behaviors of flaxseed oil were studied and compared with that of flaxseed oil-loaded liposomes. The results of dynamic light scattering, transmission electron microscopy, and oxidation stability indicated that the storage stability of proliposomes was better. After 28 days of storage, the peroxide value of flaxseed oil-loaded liposomes (20.1 meq/kg) was significantly (P < 0.05) higher than that of flaxseed oil-loaded proliposomes (9.0 meq/kg); the thiobarbituric acid reactive substances in the former (0.53 mmol/kg) was also higher than that in the latter (0.27 mmol/kg). The in vitro release behavior of flaxseed oil indicated the proliposomes were more stable in the simulated gastrointestinal fluids. Therefore, the flaxseed oil-loaded proliposome system could be a promising vehicle for delivery flaxseed oil in food industry. PRACTICAL APPLICATION: A flaxseed oil-loaded proliposome delivery system was fabricated in this research. Their physical and oxidation stability of flaxseed oil were improved, and the in vitro cumulative release of flaxseed oil was delayed compared with flaxseed oil liposomes. This system may provide an effective strategy for the flaxseed oil encapsulation in the food industry.

Morphology and microstructural analysis of bioactive-loaded micro/nanocarriers via microscopy techniques; CLSM/SEM/TEM/AFM

Efficient characterization of the physicochemical attributes of bioactive-loaded micro/nano-vehicles is crucial for the successful product development. The introduction of outstanding science-based strategies and techniques makes it possible to realize how the characteristics of the formulation ingredients affect the structural and (bio)functional properties of the final bioactive-loaded carriers. The important points to be solved, at a microscopic level, are investigating how the features of the formulation ingredients affect the morphology, surface, size, dispersity, as well as the particulate interactions within bioactive-comprising nano/micro-delivery systems. This review presents a detailed description concerning the application of advanced microscopy techniques, i.e., confocal laser scanning microscopy (CLSM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and atomic force microscopy (AFM) in characterizing the attributes of nano/microcarriers for the efficient delivery of bioactive compounds. Furthermore, the fundamental principles of these approaches, instrumentation, specific applications, and the strategy to choose the most proper technique for different carriers has been discussed.

Synthesis, characterization, and the antioxidant activity of the acetylated chitosan derivatives containing sulfonium salts

In this study, a new class of chitosan derivatives possessing sulfonium salts was synthesized, and characterized by FT-IR, ¹H NMR, ¹³C NMR, and elemental analyses. IR spectra, ¹H NMR and ¹³C NMR of the structural units of these polymers validated the designed chitosan derivatives were successfully synthesized. In addition, the antioxidant potential of chitosan and chitosan derivatives was assessed in vitro, screened by 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging, hydroxyl radical scavenging, and superoxide radical scavenging, respectively. Results revealed that designed chitosan derivatives could effectively scavenge DPPH radical, hydroxyl radical, and superoxide radical with inhibition rate of more than 90% at 1.6 mg/mL, higher than chitosan. Moreover, in the cytotoxicity assay, no cytotoxicity was observed for the L929 cells with chitosan and its derivatives at all the testing concentrations. These results indicated that the acetylated chitosan derivatives containing sulfonium salts may be a promising natural antioxidant for the pharmaceutics, food, cosmetics and agriculture management.