Chlorhexidine in Dentistry: Pharmacology, Uses, and Adverse Effects

Overview of strategies to improve the antibacterial property of dental implants

The increasing number of peri-implant diseases and the unsatisfactory results of conventional treatment are causing great concern to patients and medical staff. The effective removal of plaque which is one of the key causes of peri-implant disease from the surface of implants has become one of the main problems to be solved urgently in the field of peri-implant disease prevention and treatment. In recent years, with the advancement of materials science and pharmacology, a lot of research has been conducted to enhance the implant antimicrobial properties, including the addition of antimicrobial coatings on the implant surface, the adjustment of implant surface topography, and the development of new implant materials, and significant progress has been made in various aspects. Antimicrobial materials have shown promising applications in the prevention of peri-implant diseases, but meanwhile, there are some shortcomings, which leads to the lack of clinical widespread use of antimicrobial materials. This paper summarizes the research on antimicrobial materials applied to implants in recent years and presents an outlook on the future development.

Chlorhexidine-Containing Electrospun Polymeric Nanofibers for Dental Applications: An In Vitro Study

Chlorhexidine is the most commonly used anti-infective drug in dentistry. To treat infected void areas, a drug-loaded material that swells to fill the void and releases the drug slowly is needed. This study investigated the encapsulation and release of chlorhexidine from cellulose acetate nanofibers for use as an antibacterial treatment for dental bacterial infections by oral bacteria Streptococcus mutans and Enterococcus faecalis. This study used a commercial electrospinning machine to finely control the manufacture of thin, flexible, chlorhexidine-loaded cellulose acetate nanofiber mats with very-small-diameter fibers (measured using SEM). Water absorption was measured gravimetrically, drug release was analyzed by absorbance at 254 nm, and antibiotic effects were measured by halo analysis in agar. Slow electrospinning at lower voltage (14 kV), short target distance (14 cm), slow traverse and rotation, and syringe injection speeds with controlled humidity and temperature allowed for the manufacture of strong, thin films with evenly cross-meshed, uniform low-diameter nanofibers (640 nm) that were flexible and absorbed over 600% in water. Chlorhexidine was encapsulated efficiently and released in a controlled manner. All formulations killed both bacteria and may be used to fill infected voids by swelling for intimate contact with surfaces and hold the drug in the swollen matrix for effective bacterial killing in dental settings.

The germicidal effect, biosafety and mechanical properties of antibacterial resin composite in cavity filling

In recent years, dental resin materials have become increasingly popular for cavity filling. However, these materials can shrink during polymerization, leading to microleakages that enable bacteria to erode tooth tissue and cause secondary caries. As a result, there is great clinical demand for the development of antibacterial resins. The principle of antibacterial resin includes contact killing and filler-release killing of bacteria. For contact killing, quaternary ammonium salts (QACs) and antibacterial peptides (AMPs) can be added. For filler-release killing, chlorhexidine (CHX) and nanoparticles are used. These antibacterial agents are effective against gram-positive bacteria, gram-negative bacteria, fungi, and more. Among them, QACs has a lasting antibacterial effect, and silver nanoparticles even have a certain ability to kill viruses. Biocompatibility-wise, QACs, AMPs, and CHX have low cytotoxicity to cells when added into the resin. However, nanoparticles with smaller particle sizes have higher cytotoxicity. In terms of mechanical properties, QACs, AMPs, and CHX do not negatively affect the resin. However, the addition of magnesium oxide can have a negative impact. This paper reviews the types and antibacterial principles of commonly used antibacterial resins in recent years, evaluates their antibacterial effect, biological safety, and mechanical properties, and provides references for selecting clinical filling materials.

iASMP: An interpretable in-silico predictive tool focusing on species-specific antimicrobial peptides

Antimicrobial peptides (AMPs), a crucial part of the innate immune system, have been exploited as promising candidates for antibacterial agents. Many researchers have been devoting their efforts to develop novel AMPs in recent decades. In this term, many computational approaches have been developed to identify potential AMPs accurately. However, finding peptides specific to a particular bacterial species is challenging. Streptococcus mutans is a pathogen with an apparent cariogenic effect, and it is of great significance to study AMP that inhibit S. mutans for the prevention and treatment of caries. In this study, we proposed a sequence-based machine learning model, namely iASMP, to exactly identify potential anti-S. mutans peptides (ASMPs). After collecting ASMPs, the performances of models were compared by utilizing multiple feature descriptors and different classification algorithms. Among the baseline predictors, the model integrating the extra trees (ET) algorithm and the hybrid features exhibited optimal results. The feature selection method was utilized to remove redundant feature information to improve the model performance further. Finally, the proposed model achieved the maximum accuracy (ACC) of 0.962 on the training dataset and performed on the testing dataset with an ACC of 0.750. The results demonstrated that iASMP had an excellent predictive performance and was suitable for identifying potential ASMP. Furthermore, we also visualized the selected features and rationally explained the impact of individual features on the model output.

Revisiting Oral Antiseptics, Microorganism Targets and Effectiveness

A good oral health status is mostly dependent on good oral hygiene habits, which knowingly impacts systemic health. Although controversial, chemical oral antiseptics can be useful in adjunct use to mechanical dental plaque control techniques in the prevention and management of local and overall health and well-being. This review aims to revisit, gather and update evidence-based clinical indications for the use of the most popular oral antiseptics, considering different types, microorganism targets and effectiveness in order to establish updated clinical recommendations.

Evaluation of the antibacterial activity of Elsholtzia ciliate essential oil against halitosis-related Fusobacterium nucleatum and Porphyromonas gingivalis

The broad-spectrum antimicrobial activity of Elsholtzia ciliate essential oil (ECO) has been previously reported, but its effectiveness against halitosis-causing bacteria such as Fusobacterium nucleatum and Porphyromonas gingivalis is not well understood. In this study, we investigated the bacteriostatic activity of ECO against planktonic cells and biofilms of F. nucleatum and P. gingivalis, as well as its ability to inhibit bacterial metabolism and production of volatile sulfur compounds (VSCs) at sub-lethal concentrations. Our findings revealed that ECO exhibited comparable activities to chlorhexidine against these oral bacteria. Treatment with ECO significantly reduced the production of VSCs, including hydrogen sulfide, dimethyl disulfide, and methanethiol, which are major contributors to bad breath. As the major chemical components of ECO, carvacrol, p-cymene, and phellandrene, were demonstrated in vitro inhibitory effects on F. nucleatum and P. gingivalis, and their combined use showed synergistic and additive effects, suggesting that the overall activity of ECO is derived from the cumulative or synergistic effect of multiple active components. ECO was found to have a destructive effect on the bacterial cell membrane by examining the cell morphology and permeability. Furthermore, the application of ECO induced significant changes in the bacterial composition of saliva-derived biofilm, resulting in the elimination of bacterial species that contribute to halitosis, including Fusobacterium, Porphyromonas, and Prevotella. These results provide experimental evidence for the potential clinical applications of ECOs in the prevention and treatment of halitosis.

Optimization of In Situ Gel-Forming Chlorhexidine-Encapsulated Polymeric Nanoparticles Using Design of Experiment for Periodontitis

Periodontitis is a chronic inflammatory disease of the gums caused by pathogenic microorganisms damaging and destroying periodontal tissues. Chlorhexidine digluconate (CHX) is a commonly used antimicrobial agent for the treatment of periodontitis. However, it has many drawbacks, such as toxicity due to the high dosage required, low prolonged release, and low adhesion in the periodontal pocket. The objective of this study was to develop and optimize CHX-encapsulated polymeric nanoparticles (NPs) loaded into in situ gel-forming (ISGF) using design of experiment (DoE) to improve the treatment of periodontitis and overcome these limitations. CHX-NPs were optimized from 0.046%w/v chitosan, 0.05%w/w gelatin, and 0.25%w/w CHX. After that, the optimized of CHX-NPs was loaded into a thermosensitive ISGF, which was a mixture of 15%w/v Poloxamer 407 and 1% hydroxypropyl methylcellulose (HPMC). The optimized CHX-NPs, loaded into ISGF, was evaluated by measuring gelling temperature and time, pH, viscosity, compatibility, in vitro drug release, antibacterial activity, cytotoxicity, and stability. The results showed that the size, PDI, and zeta potential of optimized CHX-NPs were 53.07±10.17 nm, 0.36±0.02, and 27.63±4.16 mV, respectively. Moreover, the optimized ISGF loading CHX-NPs showed a gelling temperature at 34.3±1.2°C within 120.00±17.32 s with a pH value of 4.06. The viscosity of the formulations at 4°C was 54.33±0.99 cP. The DSC and FTIR showed no interaction between ingredients. The optimal formulations showed a prolonged release of up to 7 days while providing potential antibacterial activity and were safe for normal gingival fibroblast cells. Moreover, the formulations had high stability at 4°C and 25°C for 3 months. In conclusion, the study achieved the successful development of ISGF loading CHX-NPs formulations for effectiveness use in periodontal treatment.

Administration of Clinical COVID-19 Mouthwashing Protocol and Potential Modulation of Pediatric Oral Bacterial Prevalence of Selenomonas noxia: A Pilot Study

Dental office protocols to combat the SARS-CoV-2 (COVID-19) pandemic include mouth washing for an extended 60 s, thereby reducing detectable oral virus. However, it is unclear whether this protocol has any effects on the newly identified periodontal pathogen and obesity-related bacterium often found among pediatric patients, Selenomonas noxia. To determine if the mouthwash protocol has any measurable effect on S. noxia amongst pediatric patients, clinical pediatric saliva samples were obtained from pediatric patients during routine visits for clinical care and treatment. Using an approved protocol, two saliva samples were collected on the same visit before and after chlorhexidine mouthwash (Sample A, Sample B). The third sample (Sample C) was taken at the recall appointment-usually between two and eight weeks later. A total of n = 97 pre-mouthwash samples, and an equal number of matching post-mouthwash samples (n = 97) were collected, with a small number of matching recall samples (n = 36) that were subsequently collected and identified. The demographic composition of the study sample was analyzed using Chi square statistics. Sample DNA from the matching pre-, post-, and recall collections (Sample A, Sample B, and Sample C) was isolated and screened using qPCR and validated primers, which revealed that 11.1% (n = 4/36) from Sample A tested positive for S. noxia with 0% (n = 0/36) of Sample B testing positive and 13.9% (n = 5/36) of the recall (Sample C) testing positive. In addition, comparative analysis of the qPCR cycle threshold data revealed relatively lower expression (quantity) of S. noxia DNA among the recall samples, as determined by two-tailed t-tests (p=0.004). These data and results provide new evidence for the oral prevalence of S. noxia among pediatric patients, while also demonstrating that the COVID-19 protocol of mouth washing prior to clinical treatment for periods extending up to 60 s may be sufficient to reduce the levels of detectable S. noxia-at least temporarily. More research will be needed to determine whether these effects may be limited to the short- or may exhibit more lasting effects in the long-term.

Bactericidal Activity of Silver Nanoparticles on Oral Biofilms Related to Patients with and without Periodontal Disease

BACKGROUND AND OBJECTIVES

Periodontal disease (PD) is a multifactorial oral disease regularly caused by bacterial biofilms. Silver nanoparticles (AgNP) have offered good antimicrobial activity; moreover, there is no available scientific information related to their antimicrobial effects in biofilms from patients with PD. This study reports the bactericidal activity of AgNP against oral biofilms related to PD.

MATERIALS AND METHODS

AgNP of two average particle sizes were prepared and characterized. Sixty biofilms were collected from patients with (30 subjects) and without PD (30 subjects). Minimal inhibitory concentrations of AgNP were calculated and the distribution of bacterial species was defined by polymerase chain reaction.

RESULTS

Well-dispersed sizes of AgNP were obtained (5.4 ± 1.3 and 17.5 ± 3.4 nm) with an adequate electrical stability (-38.2 ± 5.8 and -32.6 ± 5.4 mV, respectively). AgNP showed antimicrobial activities for all oral samples; however, the smaller AgNP had significantly the most increased bactericidal effects (71.7 ± 39.1 µg/mL). The most resistant bacteria were found in biofilms from PD subjects (p < 0.05). P. gingivalis, T. denticola, and T. forsythia were present in all PD biofilms (100%).

CONCLUSIONS

The AgNP showed efficient bactericidal properties as an alternative therapy for the control or progression of PD.

Clinics and Practice: Consolidating Best Practices in Periodontal Management

Periodontitis is a multifactorial inflammatory disease [...].

Hydrogen Peroxide, Povidone-Iodine and Chlorhexidine Fail to Eradicate Staphylococcus aureus Biofilm from Infected Implant Materials

Hydrogen peroxide, povidone-iodine, and chlorhexidine are antiseptics that are commonly added to irrigants to either prevent or treat infection. There are little clinical data available that demonstrate efficacy of adding antiseptics to irrigants in the treatment of periprosthetic joint infection after biofilm establishment. The objective of the study was to assess the bactericidal activity of the antiseptics on S. aureus planktonic and biofilm. For planktonic irrigation, S. aureus was exposed to different concentrations of antiseptics. S. aureus biofilm was developed by submerging a Kirschner wire into normalized bacteria and allowing it to grow for forty-eight hours. The Kirschner wire was then treated with irrigation solutions and plated for CFU analysis. Hydrogen peroxide, povidone-iodine, and chlorhexidine were bactericidal against planktonic bacteria with over a 3 log reduction (p < 0.0001). Unlike cefazolin, the antiseptics were not bactericidal (less than 3 log reduction) against biofilm bacteria but did have a statistical reduction in biofilm as compared to the initial time point (p < 0.0001). As compared to cefazolin treatment alone, the addition of hydrogen peroxide or povidone-iodine to cefazolin treatment only additionally reduced the biofilm burden by less than 1 log. The antiseptics demonstrated bactericidal properties with planktonic S. aureus; however, when used to irrigate S. aureus biofilms, these antiseptics were unable to decrease biofilm mass below a 3 log reduction, suggesting that S. aureus biofilm has a tolerance to antiseptics. This information should be considered when considering antibiotic tolerance in established S. aureus biofilm treatment.

Mechanical and Physical Properties of an Experimental Chemically and Green-Nano Improved Dental Alginate after Proven Antimicrobial Potentials

OBJECTIVES

Impression materials could be a source of cross-contamination due to the presence of microorganisms from blood and saliva inside the oral cavity. Nevertheless, routinely performed post-setting disinfection could compromise the dimensional accuracy and other mechanical properties of alginates. Thus, this study aimed to evaluate detail reproduction, dimensional accuracy, tear strength, and elastic recovery of new experimentally prepared self-disinfecting dental alginates.

METHODS

Two antimicrobial-modified dental alginate groups were prepared by mixing alginate powder with 0.2% silver nitrate (AgNO3 group) and a 0.2% chlorohexidine solution (CHX group) instead of pure water. Moreover, a third modified group was examined by the extraction of Boswellia sacra (BS) oleoresin using water. The extract was used to reduce silver nitrate to form silver nanoparticles (AgNPs), and the mixture was used as well in dental alginate preparation (BS + AgNP group). Dimensional accuracy and detail reproduction were examined as per the ISO 1563 standard guidelines. Specimens were prepared using a metallic mold engraved with three parallel vertical lines 20, 50, and 75 µm wide. Detail reproduction was evaluated by checking the reproducibility of the 50 µm line using a light microscope. Dimensional accuracy was assessed by measuring the change in length between defined reference points. Elastic recovery was measured according to ISO 1563:1990, in which specimens were gradually loaded and then the load was released to allow for recovery from the deformation. Tear strength was evaluated using a material testing machine until failure at a crosshead speed of 500 mm/min.

RESULTS

The recorded dimensional changes between all tested groups were insignificantly different and within the reported acceptable values (between 0.037-0.067 mm). For tear strength, there were statistically significant differences between all tested groups. Groups modified with CHX (1.17 ± 0.26 N/mm) and BS + AgNPs (1.11 ± 0.24 N/mm) showed higher tear strength values compared to the control (0.86 ± 0.23 N/mm) but were insignificant from AgNO3 (0.94 ± 0.17 N/mm). All tested groups showed elastic recovery values that met both the ISO standard and ADA specifications for elastic impression materials and tear strength values within the acceptable documented ranges.

DISCUSSION

The CHX, silver nitrate, and green-synthesized silver nanoparticles could be promising, inexpensive alternatives for the preparation of a self-disinfecting alginate impression material without affecting its performance. Green synthesis of metal nanoparticles could be a very safe, efficient, and nontoxic method, with the advantage of having a synergistic effect between metal ions and active chemical constituents of plant extracts.

Chitosan-Based Smart Biomaterials for Biomedical Applications: Progress and Perspectives

Over the past decade, smart and functional biomaterials have escalated as one of the most rapidly emerging fields in the life sciences because the performance of biomaterials could be improved by careful consideration of their interaction and response with the living systems. Thus, chitosan could play a crucial role in this frontier field because it possesses many beneficial properties, especially in the biomedical field such as excellent biodegradability, hemostatic properties, antibacterial activity, antioxidant properties, biocompatibility, and low toxicity. Furthermore, chitosan is a smart and versatile biopolymer due to its polycationic nature with reactive functional groups that allow the polymer to form many interesting structures or to be modified in various ways to suit the targeted applications. In this review, we provide an up-to-date development of the versatile structures of chitosan-based smart biomaterials such as nanoparticles, hydrogels, nanofibers, and films, as well as their application in the biomedical field. This review also highlights several strategies to enhance biomaterial performance for fast growing fields in biomedical applications such as drug delivery systems, bone scaffolds, wound healing, and dentistry.

Preparation of Citrus reticulata peel nano-encapsulated essential oil and in vitro assessment of its biological properties

Dental caries is the most common biofilm-dependent oral disease. Streptococcus mutans is among the main microorganisms responsible for the development of dental caries. Nano-suspension of Citrus reticulata (tangerine) peel essential oil in 0.5% (v/v) concentration was prepared and its antibacterial effect on S. mutans in planktonic and biofilm forms as well as its cytotoxic and antioxidant effects were assessed and compared with chlorhexidine (CHX). The minimum inhibitory concentration (MIC) of free essential oil, nano-encapsulated essential oil, and CHX was 5.6% (v/v), 0.0005% (v/v), and 0.0002% (w/v), respectively. The percentage of biofilm inhibition by the free essential oil, nano-encapsulated essential oil, and CHX at half-MIC was 67.3%, 24%, and 90.6%, respectively. The nano-encapsulated essential oil had no cytotoxicity and showed significant antioxidant effects in different concentrations. Nano-encapsulation of tangerine peel essential oil significantly enhanced its biological activities in much lower concentrations than the free essential oil (11,000 times diluted). It also showed lower cytotoxicity and higher antibiofilm effects in sub-MICs compared with CHX, indicating the optimal potential of tangerine nano-encapsulated essential oil for incorporation in the composition of organic antibacterial and antioxidant mouth rinses.

The Antibacterial and Antifungal Capacity of Eight Commercially Available Types of Mouthwash against Oral Microorganisms: An In Vitro Study

This work aimed to evaluate and compare the antimicrobial actions and effects over time of eight types of mouthwash, based on the impact of chlorhexidine on the main microorganisms that are responsible for oral diseases: Enterococcus faecalis, Pseudomonas aeruginosa, and Candida albicans. The mouthwashes’ antimicrobial action was determined in terms of their minimum inhibitory concentration (MIC), minimum bactericidal/fungicidal concentration (MBC/MFC), and time-kill curves at different contact times (10 s, 30 s, 60 s, 5 min, 15 min, 30 min, and 60 min), against selected oral microorganisms. All the mouthwashes showed a notable effect against C. albicans (MICs ranging from 0.02% to 0.09%), and higher MIC values were recorded with P. aeruginosa (1.56% to >50%). In general, the mouthwashes showed similar antimicrobial effects at reduced contact times (10, 30, and 60 s) against all the tested microorganisms, except with P. aeruginosa, for which the most significant effect was observed with a long time (15, 30, and 60 min). The results demonstrate significant differences in the antimicrobial actions of the tested mouthwashes, although all contained chlorhexidine and most of them also contained cetylpyridinium chloride. The relevant antimicrobial effects of all the tested mouthwashes, and those with the best higher antimicrobial action, were recorded by A—GUM® PAROEX®A and B—GUM® PAROEX®, considering their effects against the resistant microorganisms and their MIC values.

Supramolecularly assisted chlorhexidine-bacterial membrane interaction with enhanced antibacterial activity and reduced side effects

Bacterial infection has emerged as a grievous threat to public health, and lots of antibacterial agents were developed to solve this issue. However, enhancing the antibacterial activity of antibacterial agents while reducing their side effects remains a challenge. Herein, a supramolecular antibacterial agent based on the host-guest interaction between cucurbit[7]uril (CB[7]) and chlorhexidine (CHX) was designed. CHX can be encapsulated in the cavity of CB[7] to form a 1:3 host-guest complex (CHX-3CB[7]). It was amazingly found that this supramolecular complex could display higher antibacterial activity than CHX alone. Electrospray mass spectrometry and UV-vis spectra revealed that the introduction of CB[7] promoted the protonation of N-atoms on CHX, resulting in stronger ion interaction with phospholipids and thus enhancing the destruction of the bacterial membrane. Scanning electron microscopy (SEM), surface ζ-potentials and outer/inner membrane integrity assays also reveal that the introduction of CB[7] aggravates the rupture of membrane. What is more, the cytotoxicity and irritation of CHX were decreased by forming the host-guest complex with CB[7]. This work provides a paradigm for enhancing antibacterial activity and reducing side effects of drugs through supramolecular chemistry.

Effect of Different Mouthwashes on the Surface Microhardness and Color Stability of Dental Nanohybrid Resin Composite

BACKGROUND

Surface microhardness and color stability of dental restorative material should be sustained throughout its functional lifetime to maintain the esthetic quality of the restoration. However, the frequent application of mouthwash may affect their surface microhardness and color stability. The aim of this study was to evaluate the effects of different types of mouthwashes with different contents on surface microhardness and color stability of dental nanohybrid resin-based composite.

METHODS

Disc specimens of nanohybrid resin composite (Luna Nano-Hybrid Composite) were prepared according to manufacturing instructions; specimens were incubated for 24 h in three types of mouthwash (Chlorohexidine, Listerine Green Tea, and Colgate Optic White Whitening Mouthwash). Artificial saliva was used as a control group. Surface microhardness was evaluated using Vickers microhardness device. Color stability after and before immersion in the different mouthwashes was evaluated using extra-oral spectrophotometer; the values of color change (ΔE₀₀) were subsequently calculated. Data were analyzed using one-way ANOVA and post hoc test (p ≤ 0.05).

RESULTS

There was no significant difference between microhardness of resin composite immersed in artificial saliva, CHX, and Green Tea mouthwashes (78.5, 78.4, and 73.5, respectively) (p ≥ 0.1), while the bleaching mouthwash led to the lowest microhardness of resin composite, with significant difference compared to the three previous immersion media (p = 0.002). Moreover, there were significant differences in the color changes (ΔE₀₀) of resin composite exposed to the various immersion media (p = 0.0001).

CONCLUSIONS

The bleaching mouthwash led to a significant reduction in nanohybrid resin composite's microhardness compared to the chlorohexidine and Green Tea containing mouthwashes. The resin composite's color change was accepted in bleaching mouthwash but unaccepted in chlorohexidine and Green Tea containing mouthwashes.

A Novel Antimicrobial Hydrogel for the Management of Periodontal Diseases

OBJECTIVES

This study aimed to synthesise a drug-delivery system based on a porous polymer hydrogel, with antimicrobial properties against Porphyromonas gingivalis and potential to be used in tissue regeneration.

MATERIAL AND METHODS

2-Hydroxyethyl methacrylate monomers were polymerised using thermal and photoactivation in the presence of silver nitrate (AgNO₃) and/or chlorhexidine digluconate. Poly-2-hydroxyethyl methacrylate (pHEMA) hydrogels containing silver nanoparticles (AgNPs) and/or 0.12% chlorhexidine (CHX) were produced and characterised using cryo-SEM and confocal microscopy. Hydrogel degradation and leaching of AgNP were tested for 1.5 months. The antimicrobial properties were tested against P. gingivalis using broth culture system and disk diffusion tests.

RESULTS

Our methodology manufactured porous polymeric hydrogels doped with AgNPs and CHX. Hydrogels showed a successful delivery of CHX and sustainable release of AgNPs in a steady hydrogel degradation rate determined based on the weight loss of samples. Hydrogels with AgNPs or CHX had a significant antimicrobial effect against P. gingivalis, with CHX-hydrogels exhibiting a stronger effect than AgNP-hydrogels in the short-term assessment. AgNP-CHX hydrogels showed a compounded antimicrobial effect, whereas control hydrogels containing neither AgNPs nor CHX had no influence on bacterial growth (P < .05).

CONCLUSIONS

The dual-cured pHEMA hydrogel loaded with antimicrobial agents proved to be an efficient drug-delivery system against periodontopathogens, with the potential to be used as a scaffold for tissue regeneration.

Periodontal Management in Periodontally Healthy Orthodontic Patients with Fixed Appliances: An Umbrella Review of Self-Care Instructions and Evidence-Based Recommendations

The present umbrella review aimed to characterize periodontal self-care instructions, prescriptions, and motivational methods; evaluate the associated periodontal outcomes; and provide integrated, evidence-based recommendations for periodontal self-care in periodontally healthy orthodontic patients with fixed appliances. The presently applied study protocol was developed in advance, compliant with the PRISMA statement, and registered on PROSPERO (CRD42022367204). Systematic reviews published in English without date restrictions were electronically searched until 21 November 2022 across the PROSPERO Register and Cochrane Library, Web of Science (Core Collection), Scopus, and MED-LINE/PubMed databases. The study quality assessment was conducted through the AMSTAR 2 tool. Seventeen systematic reviews were included. Powered and manual toothbrushes showed no significant differences in biofilm accumulation, although some evidence revealed significant improvements in inflammatory, bleeding, and periodontal pocket depth values in the short term with powered toothbrushes. Chlorhexidine mouthwashes, but no gels, varnishes, or pastes, controlled better biofilm accumulation and gingival inflammation as adjuncts to toothbrushing, although only for a limited period. Organic products, such as aloe vera and chamomile, proved their antimicrobial properties, and herbal-based mouthwashes seemed comparable to CHX without its side effects. Motivational methods also showed beneficial effects on periodontal biofilm control and inflammation, while no evidence supported probiotics administration.

Efficacy of antibacterial agents combined with erbium laser and photodynamic therapy in reducing titanium biofilm vitality: an in vitro study

BACKGROUND AND OBJECTIVE

The emergence of peri-implant diseases has prompted various methods for decontaminating the implant surface. This study compared the effectiveness of three different approaches, chlorhexidine digluconate (CHX) combined with erbium-doped yttrium-aluminum-garnet (Er:YAG) laser, photodynamic therapy (PDT), and CHX only, for reducing biofilm vitality from implant-like titanium surfaces.

STUDY DESIGN/MATERIALS AND METHODS

The study involved eight volunteers, each receiving a custom mouth device containing eight titanium discs. The volunteers were requested to wear the device for 72 h for biofilm development. Fluorescence microscopy was used to evaluate the remaining biofilm with a two-component nucleic acid dye kit. The vital residual biofilm was quantified as a percentage of the surface area using image analysis software. Sixty-four titanium discs were assigned randomly to one of four treatment groups.

RESULTS

The percentage of titanium disc area covered by vital residual biofilm was 43.9% (7.7%), 32.2% (7.0%), 56.6% (3.6%), and 73.2% (7.8%) in the PDT, Er:YAG, CHX, and control groups, respectively (mean (SD)). Compared to the control group, the treatment groups showed significant differences in the area covered by residual biofilm (P < 0.001). CHX combined with Er:YAG laser treatment was superior to CHX combined with PDT, and CHX only was better than the control.

CONCLUSION

Within the current in vitro model's limitations, CHX combined with Er:YAG laser treatment is a valid method to reduce biofilm vitality on titanium discs.

Anti-biofilm and bystander effects of antimicrobial photo-sonodynamic therapy against polymicrobial periopathogenic biofilms formed on coated orthodontic mini-screws with zinc oxide nanoparticles

BACKGROUND

The present study evaluated the anti-biofilm and bystander effects of antimicrobial photo-sonodynamic therapy (aPSDT) on the polymicrobial periopathogenic biofilms formed on mini-screws coated with zinc oxide nanoparticles (ZnONPs).

MATERIALS AND METHODS

Thirty orthodontic identical mini-screws were divided into 6 groups (n = 5) as follows: 1. negative control: uncoated mini-screw + phosphate-buffered saline (PBS), 2. positive control: uncoated mini-screw + 0.2% CHX, 3. coating control: coated mini-screw + PBS, 4. antimicrobial photodynamic therapy (aPDT): coated mini-screw+light emitting diode (LED), 5. Antimicrobial sonodynamic therapy (aSDT): coated mini-screw+ultrasound waves, and 6. aPSDT: coated mini-screw+LED+ultrasound waves. Electrostatic spray-assisted vapor deposition was employed to coat ZnONPs on titanium mini-screws. The biofilm inhibition test was used to assess the anti-biofilm efficacy against polymicrobial periopathogenic biofilms including Porphyromonas gingivitis, Prevotella intermedia, and Aggregatibacter actinomycetemcomitans, and the results were shown as the percent reduction of Log₁₀ colony-forming unit (CFU)/mL. Following each treatment, the gene expression levels of TNF-α, IL-1β, and IL-6 were evaluated on human gingival fibroblast (HGF) cells via quantitative real-time polymerase chain reaction (qRT-PCR) to reveal the bystander effects of aPSDT on HGF cells.

RESULTS

A significant reduction in log₁₀ CFU/mL of periopathogens was observed in groups treated with aPDT, aSDT, aPSDT, and 0.2% CHX up to 6.81, 6.63, 5.02, and 4.83 log, respectively, when compared with control groups (P<0.05). 0.2% CHX and aPSDT groups demonstrated significantly higher capacity in eliminating the periopathogen biofilm compared with other groups (P<0.05). The qRT-PCR showed that the expression level of inflammatory cytokines was significantly down regulated in aPDT, aSDT, and aPSDT groups (P<0.05).

CONCLUSION

It was found that the ZnONPs-mediated aPSDT could significantly reduce periopathogen biofilm as well as the expression level of inflammatory cytokines.

Licorice as a herbal extract in periodontal therapy

Periodontal disease is caused by specific pathogens which results in inflammation of the tooth-supporting structures and subsequently causes the continued breakdown of alveolar bone and periodontal ligament. Licorice (Glycyrrhiza glabra) is a perennial herb with substantial medicinal value. Licorice extract is derived from dried, unpeeled stolons and roots of Glycyrrhiza uralensis and G. glabra. The bioactive ingredients in licorice extract such as glycyrrhizin, licoricidin, glabridin, licochalcone A, and licorisoflavan A have anti-inflammatory, antimicrobial, and anti-adherence effects that are beneficial against periodontal disease. Since periodontal disease has a complex etiology that includes the host response and microorganisms, licorice phytochemicals offer a therapeutic advantage due to their dual functionality. The aim of this review was to enumerate the bioactive compounds present in herbal licorice extract and to elucidate the beneficial effects of licorice and its derivatives in periodontal therapy. Literature review and clinical trials evaluating the effect of licorice on periodontopathogens and periodontal disease are included in this article.

Licorice as a herbal extract in periodontal therapy

Periodontal disease is caused by specific pathogens which results in inflammation of the tooth-supporting structures and subsequently causes the continued breakdown of alveolar bone and periodontal ligament. Licorice (Glycyrrhiza glabra) is a perennial herb with substantial medicinal value. Licorice extract is derived from dried, unpeeled stolons and roots of Glycyrrhiza uralensis and G. glabra. The bioactive ingredients in licorice extract such as glycyrrhizin, licoricidin, glabridin, licochalcone A, and licorisoflavan A have anti-inflammatory, antimicrobial, and anti-adherence effects that are beneficial against periodontal disease. Since periodontal disease has a complex etiology that includes the host response and microorganisms, licorice phytochemicals offer a therapeutic advantage due to their dual functionality. The aim of this review was to enumerate the bioactive compounds present in herbal licorice extract and to elucidate the beneficial effects of licorice and its derivatives in periodontal therapy. Literature review and clinical trials evaluating the effect of licorice on periodontopathogens and periodontal disease are included in this article.

Comparison of 0.12% Chlorhexidine and a New Bone Bioactive Liquid, BBL, in Mouthwash for Oral Wound Healing: A Randomized, Double Blind Clinical Human Trial

Following surgery, healing within the oral cavity occurs in a hostile environment, and proper oral care and hygiene are required to accelerate recovery. The aim of the current study is to investigate and compare the bioreactivity characteristics of mouthwashes based on either chlorhexidine (CHX) or a novel bone bioactive liquid (BBL) in terms of oral healing within seven days application post-surgery. A randomized, double blind clinical trial was conducted in 81 patients, wherein the mouthwashes were applied twice a day for a period of 7 days. The visual analog scale (VAS) protocol was applied to determine pain index scores. Early wound healing index (EHI) score was determined for evaluating oral cavity healing progress. No adverse effects were observed using the mouthwashes, but CHX application resulted in stained teeth. Applications of both CHX and BBL were sufficient to reduce pain over a period of 7 days. However, the BBL group demonstrated a statistically significant reduction in VAS scores starting on day 4. The EHI scores were significantly higher in the BBL group compared with the CHX group, independent of tooth location. No differences in either VAS or EHI scores due to gender were observed. Compared with the commercially available CHX mouthwash, application of the BBL mouthwash reduced pain and accelerated oral cavity healing to a greater extent, suggesting it effectively improves the oral cavity microenvironment at the wound site in mediating soft tissue regeneration.

The Antifungal and Antibiofilm Activities of Caffeine against Candida albicans on Polymethyl Methacrylate Denture Base Material

Background: In this study, the effect of pure caffeine was established against Candida albicans (C. albicans) using different microbiological techniques. Methods: Broth microdilution and colony forming units (CFUs) assays were used to detect the minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC). The Live/Dead fluorescent dyes were implemented to determine the yeast viability. Polymethyl methacrylate acrylic resin (PMMA) discs were prepared to evaluate caffeine’s effects against adherent C. albicans using microplate reader, CFUs, and scanning electron microscope (SEM). Results: caffeine’s MIC was detected around 30 mg/mL, while the MFC was considered at 60 mg/mL. In an agar-well diffusion test, the inhibition zones were wider in caffeine groups. The Live/Dead viability test verified caffeine’s antifungal effects. The optical density of the adherent C. albicans on PMMA discs were lower at 620 nm or 410 nm in caffeine groups. CFU count was also reduced by caffeine treatments. SEM revealed the lower adherent C. albicans count in caffeine groups. The effect of caffeine was dose-dependent at which the 60 mg/mL dose demonstrated the most prominent effect. Conclusion: The study reinforced caffeine’s antifungal and antibiofilm properties and suggested it as an additive, or even an alternative, disinfectant solution for fungal biofilms on denture surfaces.

Evidence on the Use of Mouthwash for the Control of Supragingival Biofilm and Its Potential Adverse Effects

Antimicrobial mouthwash improves supragingival biofilm control when used in conjunction with mechanical removal as part of an oral hygiene routine. Mouthwash is intended to suppress bacterial adhesion during biofilm formation processes and is not aimed at mature biofilms. The most common evidence-based effects of mouthwash on the subgingival biofilm include the inhibition of biofilm accumulation and its anti-gingivitis property, followed by its cariostatic activities. There has been no significant change in the strength of the evidence over the last decade. A strategy for biofilm control that relies on the elimination of bacteria may cause a variety of side effects. The exposure of mature oral biofilms to mouthwash is associated with several possible adverse reactions, such as the emergence of resistant strains, the effects of the residual structure, enhanced pathogenicity following retarded penetration, and ecological changes to the microbiota. These concerns require further elucidation. This review aims to reconfirm the intended effects of mouthwash on oral biofilm control by summarizing systematic reviews from the last decade and to discuss the limitations of mouthwash and potential adverse reactions to its use. In the future, the strategy for oral biofilm control may shift to reducing the biofilm by detaching it or modulating its quality, rather than eliminating it, to preserve the benefits of the normal resident oral microflora.