Spatial and temporal development of chondrocyte-seeded agarose constructs in free-swelling and dynamically loaded cultures

Effects of serum and compressive loading on the cartilage matrix synthesis and spatiotemporal deposition around chondrocytes in 3D culture

The aim of this study was to investigate the effects of serum and compressive dynamic loading on the cartilaginous matrix spatiotemporal distribution around chondrocytes in vitro. Murine chondrocytes suspended in agarose were cultured in serum-free media or in varying concentrations of serum with or without compressive dynamic loading. Gene expression was assayed by quantitative polymerase chain reaction. Immunohistochemistry was performed for type II collagen and type VI collagen, aggrecan, or cartilage oligomeric matrix protein (COMP) to study the effect of serum and dynamic loading on the spatiotemporal distribution of cartilage matrix components. Chondrocytes in serum-free culture exhibited negligible differences in type II collagen, aggrecan, and COMP mRNA expression levels over 15 days of cultivation. However, higher serum concentrations decreased matrix gene expression. Expression of the matrix metalloproteinases (MMP)-3 and MMP-13 mRNA increased over time in serum-free or reduced serum levels, but was significantly suppressed in 10% fetal bovine serum (FBS). Compressive loading significantly stimulated MMP-3 expression on days 7 and 15. Immunohistochemical analysis demonstrated that maximum pericellular matrix deposition was achieved in 10% FBS culture in the absence of compressive loading. The pericellular distribution of type II and VI collagens, aggrecan, and COMP proteins tended to be more co-localized in the pericellular region from day 9 to day 21; compressive loading helped promote this co-localization of matrix proteins. The results of this study suggest that the quantity, quality, and spatial distribution of cartilaginous matrix can be altered by serum concentrations and compressive loading.

Shape matters: the diffusion rates of TMV rods and CPMV icosahedrons in a spheroid model of extracellular matrix are distinct

Nanomaterial-based carrier systems hold great promise to deliver therapies with increased efficacy and reduced side effects. While the state-of-the-art carrier system is a sphere, recent data indicate that elongated rods and filaments have advantageous flow and margination properties, resulting in enhanced vascular targeting and tumor homing. Here, we report on the distinct diffusion rates of two bio-inspired carrier systems: 30 nm-sized spherical cowpea mosaic virus (CPMV) and 300×18 nm-sized tobacco mosaic virus (TMV) with a tubular structure, using a spheroid model of the tumor microenvironment and fluorescent imaging.

Influence of tissue- and cell-scale extracellular matrix distribution on the mechanical properties of tissue-engineered cartilage

The insufficient load-bearing capacity of today's tissue- engineered (TE) cartilage limits its clinical application. Generally, cartilage TE studies aim to increase the extracellular matrix (ECM) content, as this is thought to determine the load-bearing properties of the cartilage. However, there are apparent inconsistencies in the literature regarding the correlation between ECM content and mechanical properties of TE constructs. In addition to the amount of ECM, the spatial inhomogeneities in ECM distribution at the tissue scale as well as at the cell scale may affect the mechanical properties of TE cartilage. The relative importance of such structural inhomogeneities on mechanical behavior of TE cartilage is unknown. The aim of the present study was, therefore, to theoretically elucidate the influence of these inhomogeneities on the mechanical behavior of chondrocyte-agarose TE constructs. A validated non-linear fiber-reinforced poro-elastic swelling cartilage model that can accommodate for effects of collagen reinforcement and swelling by proteoglycans was used. At the tissue scale, ECM was gradually varied from predominantly localized in the periphery of the TE construct toward an ECM-rich inner core. The effect of these inhomogeneities in relation to the total amount of ECM was also evaluated. At the cell scale, ECM was gradually varied from localized in the pericellular area, toward equally distributed throughout the interterritorial area. Results from the tissue-scale model indicated that localization of ECM in either the construct periphery or in the inner core may reduce construct stiffness compared with that of constructs with homogeneous ECM. Such effects are more significant at high ECM amounts. At the cell scale, localization of ECM around the cells significantly reduced the overall stiffness, even at low ECM amounts. The compressive stiffness gradually increased when ECM distribution became more homogeneous and the osmotic swelling pressure in the interterritorial area increased. We conclude that for the same amount of ECM content in TE cartilage constructs, superior mechanical properties can be achieved with more homogeneous ECM distribution at both tissue and cell scale. Inhomogeneities at the cell scale are more important than those at the tissue scale.

Simultaneous anabolic and catabolic responses of human chondrocytes seeded in collagen hydrogels to long-term continuous dynamic compression

Cartilage repair strategies increasingly focus on the in vitro development of cartilaginous tissues that mimic the biological and mechanical properties of native articular cartilage. However, current approaches still face problems in the reproducible and standardized generation of cartilaginous tissues that are both biomechanically adequate for joint integration and biochemically rich in extracellular matrix constituents. In this regard, the present study investigated whether long-term continuous compressive loading would enhance the mechanical and biological properties of such tissues. Human chondrocytes were harvested from 8 knee joints (n=8) of patients having undergone total knee replacement and seeded into a collagen type I hydrogel at low density of 2×10(5)cells/ml gel. Cell-seeded hydrogels were cut to disks and subjected to mechanical stimulation for 28 days with 10% continuous cyclic compressive loading at a frequency of 0.3 Hz. Histological and histomorphometric evaluation revealed long-term mechanical stimulation to significantly increase collagen type II and proteoglycan staining homogenously throughout the samples as compared to unstimulated controls. Gene expression analyses revealed a significant increase in collagen type II, collagen type I and MMP-13 gene expression under stimulation conditions, while aggrecan gene expression was decreased and no significant changes were observed in the collagen type II/collagen type I mRNA ratio. Mechanical propertywise, the average value of elastic stiffness increased in the stimulated samples. In conclusion, long-term mechanical preconditioning of human chondrocytes seeded in collagen type I hydrogels considerably improves biological and biomechanical properties of the constructs, corroborating the clinical potential of mechanical stimulation in matrix-associated autologous chondrocyte transplantation (MACT) procedures.

Tissue engineering of cartilage using a mechanobioreactor exerting simultaneous mechanical shear and compression to simulate the rolling action of articular joints

The effect of dynamic mechanical shear and compression on the synthesis of human tissue-engineered cartilage was investigated using a mechanobioreactor capable of simulating the rolling action of articular joints in a mixed fluid environment. Human chondrocytes seeded into polyglycolic acid (PGA) mesh or PGA-alginate scaffolds were precultured in shaking T-flasks or recirculation perfusion bioreactors for 2.5 or 4 weeks prior to mechanical stimulation in the mechanobioreactor. Constructs were subjected to intermittent unconfined shear and compressive loading at a frequency of 0.05 Hz using a peak-to-peak compressive strain amplitude of 2.2% superimposed on a static axial compressive strain of 6.5%. The mechanical treatment was carried out for up to 2.5 weeks using a loading regime of 10 min duration each day with the direction of the shear forces reversed after 5 min and release of all loading at the end of the daily treatment period. Compared with shaking T-flasks and mechanobioreactor control cultures without loading, mechanical treatment improved the amount and quality of cartilage produced. On a per cell basis, synthesis of both major structural components of cartilage, glycosaminoglycan (GAG) and collagen type II, was enhanced substantially by up to 5.3- and 10-fold, respectively, depending on the scaffold type and seeding cell density. Levels of collagen type II as a percentage of total collagen were also increased after mechanical treatment by up to 3.4-fold in PGA constructs. Mechanical treatment had a less pronounced effect on the composition of constructs precultured in perfusion bioreactors compared with perfusion culture controls. This work demonstrates that the quality of tissue-engineered cartilage can be enhanced significantly by application of simultaneous dynamic mechanical shear and compression, with the greatest benefits evident for synthesis of collagen type II.

Dynamic compressive loading enhances cartilage matrix synthesis and distribution and suppresses hypertrophy in hMSC-laden hyaluronic acid hydrogels

Mesenchymal stem cells (MSCs) are being recognized as a viable cell source for cartilage repair, and there is growing evidence that mechanical signals play a critical role in the regulation of stem cell chondrogenesis and in cartilage development. In this study we investigated the effect of dynamic compressive loading on chondrogenesis, the production and distribution of cartilage specific matrix, and the hypertrophic differentiation of human MSCs encapsulated in hyaluronic acid (HA) hydrogels during long term culture. After 70 days of culture, dynamic compressive loading increased the mechanical properties, as well as the glycosaminoglycan (GAG) and collagen contents of HA hydrogel constructs in a seeding density dependent manner. The impact of loading on HA hydrogel construct properties was delayed when applied to lower density (20 million MSCs/ml) compared to higher seeding density (60 million MSCs/ml) constructs. Furthermore, loading promoted a more uniform spatial distribution of cartilage matrix in HA hydrogels with both seeding densities, leading to significantly improved mechanical properties as compared to free swelling constructs. Using a previously developed in vitro hypertrophy model, dynamic compressive loading was also shown to significantly reduce the expression of hypertrophic markers by human MSCs and to suppress the degree of calcification in MSC-seeded HA hydrogels. Findings from this study highlight the importance of mechanical loading in stem cell based therapy for cartilage repair in improving neocartilage properties and in potentially maintaining the cartilage phenotype.

Structural characteristics of the collagen network in human normal, degraded and repair articular cartilages observed in polarized light and scanning electron microscopies

OBJECTIVE

This study characterizes collagen organization (CO) in human normal (n = 6), degraded (n = 6) and repair (n = 22) cartilages, using polarized light (PLM) and scanning electron (SEM) microscopies.

DESIGN

CO was assessed using a recently developed PLM-CO score (Changoor et al. Osteoarthritis Cartilage 2011;19:126-35), and zonal proportions measured. SEM images were captured from locations matched to PLM. Fibre orientations were assessed in SEM and compared to those observed in PLM. CO was also assessed in individual SEM images and combined to generate a SEM-CO score for overall CO analogous to PLM-CO. Fibre diameters were measured in SEM.

RESULTS

PLM-CO and SEM-CO scores were correlated, r = 0.786 (P < 0.00001, n = 32), after excluding two outliers. Orientation observed in PLM was validated by SEM since PLM/SEM correspondence occurred in 91.6% of samples. Proportions of the deep (DZ), transitional (TZ) and superficial (SZ) zones averaged 74.0 ± 9.1%, 18.6 ± 7.0%, and 7.3 ± 1.2% in normal, and 45.6 ± 10.7%, 47.2 ± 10.1% and 9.5 ± 3.4% in degraded cartilage, respectively. Fibre diameters in normal cartilage increased with depth from the articular surface [55.8 ± 9.4 nm (SZ), 87.5 ± 1.8 nm (TZ) and 108.2 ± 1.8 nm (DZ)]. Fibre diameters were smaller in repair biopsies [60.4 ± 0.7 nm (SZ), 63.2 ± 0.6 nm (TZ) and 67.2 ± 0.8 nm (DZ)]. Degraded cartilage had wider fibre diameter ranges and bimodal distributions, possibly reflecting new collagen synthesis and remodelling or collagen fibre unravelling. Repair tissues revealed the potential of microfracture-based repair procedures to produce zonal CO resembling native articular cartilage structure. Values are reported as mean ± 95% confidence interval.

CONCLUSION

This detailed assessment of collagen architecture could benefit the development of cartilage repair strategies intended to recreate functional collagen architecture.

Tissue engineering of functional articular cartilage: the current status

Osteoarthritis is a degenerative joint disease characterized by pain and disability. It involves all ages and 70% of people aged >65 have some degree of osteoarthritis. Natural cartilage repair is limited because chondrocyte density and metabolism are low and cartilage has no blood supply. The results of joint-preserving treatment protocols such as debridement, mosaicplasty, perichondrium transplantation and autologous chondrocyte implantation vary largely and the average long-term result is unsatisfactory. One reason for limited clinical success is that most treatments require new cartilage to be formed at the site of a defect. However, the mechanical conditions at such sites are unfavorable for repair of the original damaged cartilage. Therefore, it is unlikely that healthy cartilage would form at these locations. The most promising method to circumvent this problem is to engineer mechanically stable cartilage ex vivo and to implant that into the damaged tissue area. This review outlines the issues related to the composition and functionality of tissue-engineered cartilage. In particular, the focus will be on the parameters cell source, signaling molecules, scaffolds and mechanical stimulation. In addition, the current status of tissue engineering of cartilage will be discussed, with the focus on extracellular matrix content, structure and its functionality.

Coculture of engineered cartilage with primary chondrocytes induces expedited growth

BACKGROUND

Soluble factors released from chondrocytes can both enhance and induce chondrocyte-like behavior in cocultured dedifferentiated cells. The ability to similarly prime and modulate biosynthetic activity of differentiated cells encapsulated in a three-dimensional environment is unknown.

QUESTIONS/PURPOSES

To understand the effect of coculture on engineered cartilage, we posed three hypotheses: (1) coculturing with a monolayer of chondrocytes ("chondrocyte feeder layer") expedites and increases engineered tissue growth; (2) expedited growth arises from paracrine effects; and (3) these effects are dependent on the specific morphology and expression of the two-dimensional feeder cells.

METHODS

In three separate studies, chondrocyte-laden hydrogels were cocultured with chondrocyte feeder layers. Mechanical properties and biochemical content were quantified to evaluate tissue properties. Histology and immunohistochemistry stains were observed to visualize each constituent's distribution and organization.

RESULTS

Coculture with a chondrocyte feeder layer led to stiffer tissue constructs (Young's modulus and dynamic modulus) with greater amounts of glycosaminoglycan and collagen. This was dependent on paracrine signaling between the two populations of cells and was directly modulated by the rounded morphology and expression of the feeder cell monolayer.

CONCLUSIONS

These findings suggest a potential need to prime and modulate tissues before implantation and present novel strategies for enhancing medium formulations using soluble factors released by feeder cells.

CLINICAL RELEVANCE

Determining the soluble factors present in the coculture system can enhance a chondrogenic medium formulation for improved growth of cartilage substitutes. The feeder layer strategy described here may also be used to prime donor cartilage allografts before implantation to increase their success in vivo.

Bioactive glass 13-93 as a subchondral substrate for tissue-engineered osteochondral constructs: a pilot study

BACKGROUND

Replacement of diseased areas of the joint with tissue-engineered osteochondral grafts has shown potential in the treatment of osteoarthritis. Bioactive glasses are candidates for the osseous analog of these grafts.

QUESTIONS/PURPOSES

(1) Does Bioactive Glass 13-93 (BG 13-93) as a subchondral substrate improve collagen and glycosaminoglycan production in a tissue-engineered cartilage layer? (2) Does BG 13-93 as a culture medium supplement increase the collagen and glycosaminoglycan production and improve the mechanical properties in a tissue-engineered cartilage layer?

METHODS

In Study 1, bioactive glass samples (n = 4) were attached to a chondrocyte-seeded agarose layer to form an osteochondral construct, cultured for 6 weeks, and compared to controls. In Study 2, bioactive glass samples (n = 5) were cocultured with cell-seeded agarose for 6 weeks. The cell-seeded agarose layer was exposed to BG 13-93 either continuously or for the first or last 2 weeks in culture or had no exposure.

RESULTS

Osteochondral constructs with a BG 13-93 base had improved glycosaminoglycan deposition but less collagen II content. Agarose scaffolds that had a temporal exposure to BG 13-93 within the culture medium had improved mechanical and biochemical properties compared to continuous or no exposure.

CONCLUSIONS

When used as a subchondral substrate, BG 13-93 did not improve biochemical properties compared to controls. However, as a culture medium supplement, BG 13-93 improved the biochemical and mechanical properties of a tissue-engineered cartilage layer.

CLINICAL RELEVANCE

BG 13-93 may not be suitable in osteochondral constructs but could have potential as a medium supplement for neocartilage formation.

Mechanically induced structural changes during dynamic compression of engineered cartilaginous constructs can potentially explain increases in bulk mechanical properties

Several studies on chondrocyte-seeded hydrogels in bioreactor culture report increased mechanical properties of mechanically loaded constructs compared with unloaded free swelling controls despite no significant differences in biochemical composition. One possible explanation is that changes in the collagen architecture of dynamically compressed constructs lead to improved mechanical properties. Collagen molecules are incorporated locally into the extracellular matrix with individual stress-free configurations and orientations. In this study, we computationally investigated possible influences of loading on the collagen architecture in chondrocyte-seeded hydrogels and their resulting mechanical properties. Both the collagen orientation and its stress-free configuration were hypothesized to depend on the local mechanical environment. Reorientation of the collagen network alone in response to dynamic compression leads to a prediction of constructs with lower compressive properties. In contrast, remodelling of the stress-free configuration of the collagen fibres was predicted to result in a more compacted tissue with higher swelling pressures and an altered pre-stressed state within the collagen network. Combining both mechanisms resulted in predictions of construct geometry and mechanical properties in agreement with experimental observations. This study provides support for the hypothesis that structural changes to the collagen network contribute to the enhanced mechanical properties of cartilaginous tissues engineered in bioreactors.

Numerical assessment on the effective mechanical stimuli for matrix-associated metabolism in chondrocyte-seeded constructs

The self-regeneration capacity of articular cartilage is limited, due to its avascular and aneural nature. Loaded explants and cell cultures demonstrated that chondrocyte metabolism can be regulated via physiologic loading. However, the explicit ranges of mechanical stimuli that correspond to favourable metabolic response associated with extracellular matrix (ECM) synthesis are elusive.Unsystematic protocols lacking this knowledge produce inconsistent results. This study aims to determine the intrinsic ranges of physical stimuli that increase ECM synthesis and simultaneously inhibit nitric oxide (NO) production in chondrocyte–agarose constructs, by numerically reevaluating the experiments performed by Tsuang et al. (2008). Twelve loading patterns were simulated with poro-elastic finite element models in ABAQUS. Pressure on solid matrix, von Mises stress, maximum principle stress and pore pressure were selected as intrinsic mechanical stimuli.Their development rates and magnitudes at the steady state of cyclic loading were calculated with MATLAB at the construct level. Concurrent increase in glycosaminoglycan and collagen was observed at 2300 Pa pressure and 40 Pa/s pressure rate. Between 0–1500 Pa and 0–40 Pa/s, NO production was consistently positive with respect to controls, whereas ECM synthesis was negative in the same range. A linear correlation was found between pressure rate and NO production (R =0.77). Stress states identified in this study are generic and could be used to develop predictive algorithms for matrix production in agarose–chondrocyte constructs of arbitrary shape, size and agarose concentration. They could also be helpful to increase the efficacy of loading protocols for avascular tissue engineering.

Hydrogels for the repair of articular cartilage defects

The repair of articular cartilage defects remains a significant challenge in orthopedic medicine. Hydrogels, three-dimensional polymer networks swollen in water, offer a unique opportunity to generate a functional cartilage substitute. Hydrogels can exhibit similar mechanical, swelling, and lubricating behavior to articular cartilage, and promote the chondrogenic phenotype by encapsulated cells. Hydrogels have been prepared from naturally derived and synthetic polymers, as cell-free implants and as tissue engineering scaffolds, and with controlled degradation profiles and release of stimulatory growth factors. Using hydrogels, cartilage tissue has been engineered in vitro that has similar mechanical properties to native cartilage. This review summarizes the advancements that have been made in determining the potential of hydrogels to replace damaged cartilage or support new tissue formation as a function of specific design parameters, such as the type of polymer, degradation profile, mechanical properties and loading regimen, source of cells, cell-seeding density, controlled release of growth factors, and strategies to cause integration with surrounding tissue. Some key challenges for clinical translation remain, including limited information on the mechanical properties of hydrogel implants or engineered tissue that are necessary to restore joint function, and the lack of emphasis on the ability of an implant to integrate in a stable way with the surrounding tissue. Future studies should address the factors that affect these issues, while using clinically relevant cell sources and rigorous models of repair.

Bioactive glass in tissue engineering

This review focuses on recent advances in the development and use of bioactive glass for tissue engineering applications. Despite its inherent brittleness, bioactive glass has several appealing characteristics as a scaffold material for bone tissue engineering. New bioactive glasses based on borate and borosilicate compositions have shown the ability to enhance new bone formation when compared to silicate bioactive glass. Borate-based bioactive glasses also have controllable degradation rates, so the degradation of the bioactive glass implant can be more closely matched to the rate of new bone formation. Bioactive glasses can be doped with trace quantities of elements such as Cu, Zn and Sr, which are known to be beneficial for healthy bone growth. In addition to the new bioactive glasses, recent advances in biomaterials processing have resulted in the creation of scaffold architectures with a range of mechanical properties suitable for the substitution of loaded as well as non-loaded bone. While bioactive glass has been extensively investigated for bone repair, there has been relatively little research on the application of bioactive glass to the repair of soft tissues. However, recent work has shown the ability of bioactive glass to promote angiogenesis, which is critical to numerous applications in tissue regeneration, such as neovascularization for bone regeneration and the healing of soft tissue wounds. Bioactive glass has also been shown to enhance neocartilage formation during in vitro culture of chondrocyte-seeded hydrogels, and to serve as a subchondral substrate for tissue-engineered osteochondral constructs. Methods used to manipulate the structure and performance of bioactive glass in these tissue engineering applications are analyzed.

Silk hydrogel for cartilage tissue engineering

Cartilage tissue engineering based on cultivation of immature chondrocytes in agarose hydrogel can yield tissue constructs with biomechanical properties comparable to native cartilage. However, agarose is immunogenic and nondegradable, and our capability to modify the structure, composition, and mechanical properties of this material is rather limited. In contrast, silk hydrogel is biocompatible and biodegradable, and it can be produced using a water-based method without organic solvents that enables precise control of structural and mechanical properties in a range of interest for cartilage tissue engineering. We observed that one particular preparation of silk hydrogel yielded cartilaginous constructs with biochemical content and mechanical properties matching constructs based on agarose. This finding and the possibility to vary the properties of silk hydrogel motivated this study of the factors underlying the suitability of hydrogels for cartilage tissue engineering. We present data resulting from a systematic variation of silk hydrogel properties, silk extraction method, gel concentration, and gel structure. Data suggest that silk hydrogel can be used as a tool for studies of the hydrogel-related factors and mechanisms involved in cartilage formation, as well as a tailorable and fully degradable scaffold for cartilage tissue engineering.

Tissue engineering by molecular disassembly and reassembly: biomimetic retention of mechanically functional aggrecan in hydrogel

In vitro assembly of key functional extracellular matrix constituents for tissue-engineered constructs may provide a tool to modulate the retention of proteoglycan (PG) aggregates, which are crucial to compressive biomechanical properties of connective tissues. This study tested the hypotheses that (1) biomimetic molecular reassembly of PG aggregates (native aggrecan [AGC] with hyaluronan [HA] ± link protein [LP]) affects AGC retention kinetics in hydrogel constructs, (2) the compressive properties of such hydrogel constructs are related to the content of retained AGC, and (3) the reassembly method is compatible with chondrocytes. Addition of HA to AGC in hydrogel constructs increased AGC retention in a dose-dependent manner, and the addition of LP to AGC + HA further enhanced AGC retention. The level of AGC retention, in turn, was associated with increased equilibrium compressive stress of the constructs. Chondrocytes could be included in the process, and maintained expression of the chondrogenic phenotype, secreting type II collagen but little type I collagen. Thus, by altering the assembly of PG aggregates with HA ± LP, which affects AGC retention, it may be possible to achieve the targeted levels of PG components to modulate the mechanical properties of the engineered construct for cartilage as well as other tissues containing PG and PG aggregates.

Response of engineered cartilage to mechanical insult depends on construct maturity

Injury to articular cartilage leads to degenerative changes resulting in a loss of mechanical and biochemical properties. In engineered cartilage, the injury response of developing constructs is unclear.

OBJECTIVE

To characterize the cellular response of tissue-engineered constructs cultured in chemically-defined medium after mechanical insult, either by compression-induced cracking, or by cutting, as a function of construct maturity.

METHODS

Primary immature bovine articular chondrocytes (4-6 weeks) were encapsulated in agarose hydrogel (2%, 30 millioncells/mL) and cultured in chemically-defined medium supplemented with Transforming growth factor (TGF)-β3 (10ng/mL, first 2 weeks). At early (5 days) and late (35 days) times in culture, subsets of constructs were exposed to mechanical overload to produce a crack in the tissue or were exposed to a sharp wound with a perpendicular cut. Constructs were returned to culture and allowed to recover in static conditions. Mechanical and biochemical properties were evaluated at 2-week intervals to day 70, and cellular viability was assessed at 2-week intervals to day 85.

RESULTS

Constructs injured early in culture recovered their mechanical stiffness back to control values, regardless of the mode of injury. Later in culture, when constructs exhibited properties similar to those of native cartilage, compression-induced cracking catastrophically damaged the bulk matrix of the tissue and resulted in permanent mechanical failure with persistent cell death. No such detrimental outcomes were observed with cutting. Biochemical content was similar across all groups irrespective of mode or time of injury.

CONCLUSIONS

Unlike native cartilage, engineered cartilage constructs exhibit a reparative capacity when the bulk integrity of the developing tissue is preserved after injury.

Dynamic mechanical loading enhances functional properties of tissue-engineered cartilage using mature canine chondrocytes

OBJECTIVE

The concept of cartilage functional tissue engineering (FTE) has promoted the use of physiologic loading bioreactor systems to cultivate engineered tissues with load-bearing properties. Prior studies have demonstrated that culturing agarose constructs seeded with primary bovine chondrocytes from immature joints, and subjected to dynamic deformation, produced equilibrium compressive properties and proteoglycan content matching the native tissue. In the process of translating these results to an adult canine animal model, it was found that protocols previously successful with immature bovine primary chondrocytes did not produce the same successful outcome when using adult canine primary chondrocytes. The objective of this study was to assess the efficacy of a modified FTE protocol using adult canine chondrocytes seeded in agarose hydrogel and subjected to dynamic loading.

METHOD

Two modes of dynamic loading were applied to constructs using custom bioreactors: unconfined axial compressive deformational loading (DL; 1 Hz, 10% deformation) or sliding contact loading (Slide; 0.5 Hz, 10% deformation). Loading for 3 h daily was initiated on day 0, 14, or 28 (DL0, DL14, DL28, and Slide14).

RESULTS

Constructs with applied loading (both DL and Slide) exhibited significant increases in Young's modulus compared with free-swelling control as early as day 28 in culture (p < 0.05). However, glycosaminoglycan, collagen, and DNA content were not statistically different among the various groups. The modulus values attained for engineered constructs compare favorably with (and exceed in some cases) those of native canine knee (patella groove and condyle) cartilage.

CONCLUSION

Our findings successfully demonstrate an FTE strategy incorporating clinically relevant, adult chondrocytes and gel scaffold for engineering cartilage replacement tissue. These results, using continuous growth factor supplementation, are in contrast to our previously reported studies with immature chondrocytes where the sequential application of dynamic loading after transient transforming growth factor-beta3 application was found to be a superior culture protocol. Sliding, which simulates aspects of joint articulation, has shown promise in promoting engineered tissue development and provides an alternative option for FTE of cartilage constructs to be further explored.

Passaged adult chondrocytes can form engineered cartilage with functional mechanical properties: a canine model

It was hypothesized that previously optimized serum-free culture conditions for juvenile bovine chondrocytes could be adapted to generate engineered cartilage with physiologic mechanical properties in a preclinical, adult canine model. Primary or passaged (using growth factors) adult chondrocytes from three adult dogs were encapsulated in agarose, and cultured in serum-free media with transforming growth factor-beta3. After 28 days in culture, engineered cartilage formed by primary chondrocytes exhibited only small increases in glycosaminoglycan content. However, all passaged chondrocytes on day 28 elaborated a cartilage matrix with compressive properties and glycosaminoglycan content in the range of native adult canine cartilage values. A preliminary biocompatibility study utilizing chondral and osteochondral constructs showed no gross or histological signs of rejection, with all implanted constructs showing excellent integration with surrounding cartilage and subchondral bone. This study demonstrates that adult canine chondrocytes can form a mechanically functional, biocompatible engineered cartilage tissue under optimized culture conditions. The encouraging findings of this work highlight the potential for tissue engineering strategies using adult chondrocytes in the clinical treatment of cartilage defects.

Long-term dynamic loading improves the mechanical properties of chondrogenic mesenchymal stem cell-laden hydrogel

Mesenchymal stem cells (MSCs) are an attractive cell source for cartilage tissue engineering given their ability to undergo chondrogenesis in 3D culture systems. Mechanical forces play an important role in regulating both cartilage development and MSC chondrogenic gene expression, however, mechanical stimulation has yet to enhance the mechanical properties of engineered constructs. In this study, we applied long-term dynamic compression to MSC-seeded constructs and assessed whether varying pre-culture duration, loading regimens and inclusion of TGF-beta3 during loading would influence functional outcomes and these phenotypic transitions. Loading initiated before chondrogenesis decreased functional maturation, although chondrogenic gene expression increased. In contrast, loading initiated after chondrogenesis and matrix elaboration further improved the mechanical properties of MSC-based constructs, but only when TGF-beta3 levels were maintained and under specific loading parameters. Although matrix quantity was not affected by dynamic compression, matrix distribution, assessed histologically and by FT-IRIS analysis, was significantly improved on the micro- (pericellular) and macro- (construct expanse) scales. Further, whole genome expression profiling revealed marked shifts in the molecular topography with dynamic loading. These results demonstrate, for the first time, that dynamic compressive loading initiated after a sufficient period of chondro-induction and with sustained TGF-beta exposure enhances matrix distribution and the mechanical properties of MSC-seeded constructs.

Genipin enhances the mechanical properties of tissue-engineered cartilage and protects against inflammatory degradation when used as a medium supplement

Genipin is a naturally-derived biocompatible cross-linking agent commonly used to generate three dimensional tissue-engineered scaffolds or to fix biologically derived scaffolds prior to implantation. Here we propose a novel use for genipin as a long-term culture medium supplement to promote cross-linking of de novo cell products that are produced in engineered cartilage. We hypothesize that the application of genipin will stabilize the extracellular matrix components and increase the mechanical properties of developing engineered cartilage. Chondrocytes encapsulated in agarose hydrogel (a neutrally charged polysaccharide scaffold that is unaffected by genipin cross-linking) were cultured in a chemically-defined growth medium that was supplemented with varying concentrations of genipin (22 microM, 220 microM, 2200 microM) for various durations (continuous or intermittent). Tissues developed significantly higher mechanical properties (+28% dynamic modulus and +20% Young's modulus) by day 42 with genipin treatment compared to untreated controls. These increases were not immediate, but presented over culture time after genipin treatment. The genipin treated groups were also more resistant to cytokine-induced degradation with interleukin-1alpha; maintaining an E(Y) (+218%), G* (+390%) and glycosaminoglycan (GAG) content (+477%) over genipin-untreated constructs subjected to interleukin. We hypothesize two mechanisms through which the physical enhancement of tissue properties may be fostered: (1) by cross-link mediated reorganization and enhanced retention of cell-elaborated extracellular matrix components, and (2) through reduction of the loss of extracellular matrix components by increasing their resilience to catabolic degradation. These studies demonstrate a potential use of genipin as a medium supplement to develop enhanced engineered cartilage.

Alphav and beta1 integrins regulate dynamic compression-induced proteoglycan synthesis in 3D gel culture by distinct complementary pathways

OBJECTIVE

Our goal was to test the hypothesis that specific integrin receptors regulate chondrocyte biosynthetic response to dynamic compression at early times in 3D gel culture, during initial evolution of the pericellular matrix, but prior to significant accumulation of further-removed matrix. The study was motivated by increased use of dynamic loading, in vitro, for early stimulation of tissue engineered cartilage, and the need to understand the effects of loading, in vivo, at early times after implantation of constructs.

METHODS

Bovine articular chondrocytes were seeded in 2% agarose gels (15x10(6)cells/mL) and incubated for 18 h with and without the presence of specific integrin blockers (small-molecule peptidomimetics, function-blocking antibodies, and RGD-containing disintegrins). Samples were then subjected to a 24-h dynamic compression regime found previously to stimulate chondrocyte biosynthesis in 3D gel as well as cartilage explant culture (1 Hz, 2.5% dynamic strain amplitude, 7% static offset strain). At the end of loading, proteoglycan (PG) synthesis ((35)S-sulfate incorporation), protein synthesis ((3)H-proline incorporation), DNA content (Hoechst dye 33258) and total glycosaminoglycan (GAG) content (dimethyl methylene blue (DMMB) dye binding) were assessed.

RESULTS

Consistent with previous studies, dynamic compression increased PG synthesis and total GAG accumulation compared to free-swelling controls. Blocking alphavbeta3 abolished this response, independent of effects on controls, while blocking beta1 abolished the relative changes in synthesis when changes in free-swelling synthesis rates were observed.

CONCLUSIONS

This study suggests that both alphavbeta3 and beta1 play a role in pathways that regulate stimulation of PG synthesis and accumulation by dynamic compression, but through distinct complementary mechanisms.

Mechanical loading regimes affect the anabolic and catabolic activities by chondrocytes encapsulated in PEG hydrogels

OBJECTIVE

Mechanical loading of cell-laden synthetic hydrogels is one strategy for regenerating functional cartilage. This work tests the hypothesis that type of loading (continuous vs intermittent) and timing when loading is applied (immediate vs delayed) influence anabolic and catabolic activities of chondrocytes when encapsulated in poly(ethylene glycol) (PEG) hydrogels.

METHODS

Primary bovine chondrocytes encapsulated in PEG hydrogels were subjected to unconfined dynamic compressive strains applied continuously or intermittently for 1 week (i.e., immediate) or intermittently for 1 week but after a 1 week free-swelling (FS) period (i.e., delayed). Anabolic activities were assessed by gene expression for collagen II and aggrecan (AGC) and extracellular matrix (ECM) deposition by (immuno)histochemistry. Catabolic activities were assessed by gene expression for matrix metalloproteinases, MMP-1, 3, and 13.

RESULTS

Intermittent loading (IL) upregulated ECM and MMP expressions, e.g., 2-fold, 16-fold and 8-fold for collagen II, MMP-1, MMP-3, respectively. Continuous loading upregulated AGC expression 1.5-fold but down-regulated MMP-1 (3-fold) and -3 (2-fold) expressions. For delayed loading, chondrocytes responded to FS conditions by down-regulating MMP expressions (P<0.01), but were less sensitive to loading when applied during week 2. Spatially, deposition of ECM molecules was dependent on the timing of loading, where immediate loading favored enhanced collagen II deposition.

CONCLUSIONS

The type and timing of dynamic loading dramatically influenced ECM and MMP gene expression and to a lesser degree matrix deposition. Our findings suggest that early applications of IL is necessary to stimulate both anabolic and catabolic activities, which may be important in regenerating and restructuring the engineered tissue long-term.

Chondroitinase ABC treatment results in greater tensile properties of self-assembled tissue-engineered articular cartilage

Collagen content and tensile properties of engineered articular cartilage have remained inferior to glycosaminoglycan (GAG) content and compressive properties. Based on a cartilage explant study showing greater tensile properties after chondroitinase ABC (C-ABC) treatment, C-ABC as a strategy for cartilage tissue engineering was investigated. A scaffold-less approach was employed, wherein chondrocytes were seeded into non-adherent agarose molds. C-ABC was used to deplete GAG from constructs 2 weeks after initiating culture, followed by 2 weeks culture post-treatment. Staining for GAG and type I, II, and VI collagen and transmission electron microscopy were performed. Additionally, quantitative total collagen, type I and II collagen, and sulfated GAG content were measured, and compressive and tensile mechanical properties were evaluated. At 4 wks, C-ABC treated construct ultimate tensile strength and tensile modulus increased 121% and 80% compared to untreated controls, reaching 0.5 and 1.3 MPa, respectively. These increases were accompanied by increased type II collagen concentration, without type I collagen. As GAG returned, compressive stiffness of C-ABC treated constructs recovered to be greater than 2 wk controls. C-ABC represents a novel method for engineering functional articular cartilage by departing from conventional anabolic approaches. These results may be applicable to other GAG-producing tissues functioning in a tensile capacity, such as the musculoskeletal fibrocartilages.

Influence of temporary chondroitinase ABC-induced glycosaminoglycan suppression on maturation of tissue-engineered cartilage

OBJECTIVE

A fundamental challenge of cartilage tissue engineering has been the inability to promote collagen synthesis up to native levels. In contrast, recent protocols have demonstrated that glycosaminoglycans (GAG) can be synthesized to native levels in 4-6 weeks of in vitro culture. We hypothesize that rapid GAG synthesis may be an impediment to collagen synthesis, possibly by altering transport pathways of nutrients or synthesis products. In this study, this hypothesis is tested by inducing enzymatic GAG loss in the early culture period of cartilage tissue constructs, and monitoring collagen content at various time points after cessation of enzymatic treatment.

METHODS

In Study 1, to induce breakdown of proteoglycans, chondroitinase ABC (CABC, 0.002U/mL) was continuously added into the culture media for the initial 4 weeks of culture or for 2 weeks starting on day 14 of culture. In Study 2, multiple transient CABC treatments (0.15U/mL, for 2 days) were applied to the matured tissue-engineered constructs.

RESULTS

Continuous and transient CABC treatments significantly increased the collagen concentration of the constructs, improving their tensile properties. The GAG content of the treated constructs recovered quickly to the pretreatment level after 2-3 weeks.

CONCLUSIONS

This study demonstrates that tissue-engineered cartilage constructs with improved tensile properties can be achieved by temporarily suppressing the GAG content enzymatically.

Zonal chondrocytes seeded in a layered agarose hydrogel create engineered cartilage with depth-dependent cellular and mechanical inhomogeneity

We hypothesized that zonal populations of chondrocytes seeded into a bilayered scaffold with initially prescribed depth-varying, compressive material properties will lead to a biomimetic cartilage tissue construct with depth-dependent cellular and compressive mechanical inhomogeneity similar to that of the native tissue. Superficial zone chondrocytes (SZCs) and middle/deep zone chondrocytes (MDZCs) were isolated and encapsulated with 2% or 3% agarose to form single-layered constructs of 2% SZC, 3% SZC, 2% MDZC; bilayered constructs of 2% SZC/2% MDZC and 3% SZC/2% MDZC; and 2% mixed chondrocyte controls. For SZCs on day 42, increased glycosaminoglycan (GAG) and collagen was found with increased agarose concentration and when layered with MDZCs. Superficial zone protein increased with agarose concentration in bilayered constructs. For MDZCs, increased GAG content and regulation of cell proliferation was observed when layered with SZCs. Bilayered constructs possessed a depth-dependent compressive modulus qualitatively similar to that of native articular cartilage, whereas controls showed a U-shaped profile with stiffer peripheral edges and softer middle region. This study is the first to create an engineered cartilage tissue with depth-varying cellular as well as mechanical inhomogeneity. Future studies will determine if replicating inhomogeneity is advantageous in clinical applications of tissue engineered cartilage.

Duty Cycle of Deformational Loading Influences the Growth of Engineered Articular Cartilage

This study examines how variations in the duty cycle (the duration of applied loading) of deformational loading can influence the mechanical properties of tissue engineered cartilage constructs over one month in bioreactor culture. Dynamic loading was carried out with three different duty cycles: 1 h on/1 h off for a total of 3 h loading/day, 3 h continuous loading, or 6 h of continuous loading per day, with all loading performed 5 days/week. All loaded groups showed significant increases in Young's modulus after one month (vs. free swelling controls), but only loading for a continuous 3 and 6 h showed significant increases in dynamic modulus by this time point. Histological analysis showed that dynamic loading can increase cartilage oligomeric matrix protein (COMP) and collagen types II and IX, as well as prevent the formation of a fibrous capsule around the construct. Type II and IX collagen deposition increased with increased with duration of applied loading. These results point to the efficacy of dynamic deformational loading in the mechanical preconditioning of engineered articular cartilage constructs. Furthermore, these results highlight the ability to dictate mechanical properties with variations in mechanical input parameters, and the possible importance of other cartilage matrix molecules, such as COMP, in establishing the functional material properties of engineered constructs.

Unconfined compression properties of a porous poly(vinyl alcohol)-chitosan-based hydrogel after hydration

A poly(vinyl alcohol) (PVA) hydrogel composite scaffold containing N,O-carboxymethylated chitosan (NOCC) was tested to assess its potential as a scaffold for cartilage tissue engineering in a weight-bearing environment. The mechanical properties under unconfined compression for different hydration periods were investigated. The effect of supplementing PVA with NOCC (20wt.% PVA:5vol.% NOCC) produced a porosity of 43.3% and this was compared against a non-porous PVA hydrogel (20g PVA: 100ml of water, control). Under non-hydrated conditions, the porous PVA-NOCC hydrogel behaved in a similar way to the control non-porous PVA hydrogel, with similar non-linear stress-strain response under unconfined compression (0-30% strain). After 7days' hydration, the porous hydrogel demonstrated a reduced stiffness (0.002kPa, at 25% strain), resulting in a more linear stiffness relationship over a range of 0-30% strain. Poisson's ratio for the hydrated non-porous and porous hydrogels ranged between 0.73 and 1.18, and 0.76 and 1.33, respectively, suggesting a greater fluid flow when loaded. The stress relaxation function for the porous hydrogel was affected by the hydration period (from 0 to 600s); however the percentage stress relaxation regained by about 95%, after 1200s for all hydration periods assessed. No significant differences were found between the different hydration periods between the porous hydrogels and control. The calculated aggregate modulus, H(A), for the porous hydrogel reduced drastically from 10.99kPa in its non-hydrated state to about 0.001kPa after 7days' hydration, with the calculated shear modulus reducing from 30.92 to 0.14kPa, respectively. The porous PVA-NOCC hydrogel conformed to a biphasic, viscoelastic model, which has the desired properties required for any scaffold in cartilage tissue engineering.

Investigating conversion of mechanical force into biochemical signaling in three-dimensional chondrocyte cultures

The culture of chondrocytes embedded within agarose hydrogels maintains chondrocytic phenotype over extended periods and allows analysis of the chondrocyte response to mechanical forces. The mechanisms involved in the transduction of a mechanical stimulus to a physiological process are not completely deciphered. We present protocols to prepare and characterize constructs of murine chondrocytes and agarose (1 week pre-culture period), to analyze the effect of compression on mRNA level by RT-PCR (2-3 d), gene transcription by gene reporter assay (3 d) and phosphorylation state of signaling molecules by western blotting (3-4 d). The protocols can be carried out with a limited number of mouse embryos or newborns and this point is particularly important regarding genetically modified mice.

Influence of decreasing nutrient path length on the development of engineered cartilage

OBJECTIVE

Chondrocyte-seeded agarose constructs of 4mm diameter (2.34 mm thickness) develop spatially inhomogeneous material properties with stiffer outer edges and a softer central core suggesting nutrient diffusion limitations to the central construct region [Guilak F, Sah RL, Setton LA. Physical regulation of cartilage metabolism. In: Mow VC, Hayes WC, Eds. Basic Orthopaedic Biomechanics, Philadelphia 1997;179-207.]. The effects of reducing construct thickness and creating channels running through the depth of the thick constructs were examined.

METHODS

In Study 1, the properties of engineered cartilage of 0.78 mm (thin) or 2.34 mm (thick) thickness were compared. In Study 2, a single nutrient channel (1 mm diameter) was created in the middle of each thick construct. In Study 3, the effects of channels on larger 10 mm diameter, thick constructs were examined.

RESULTS

Thin constructs developed superior mechanical and biochemical properties than thick constructs. The channeled constructs developed significantly higher mechanical properties vs control channel-free constructs while exhibiting similar glycosaminoglycan (GAG) and collagen content. Collagen staining suggested that channels resulted in a more uniform fibrillar network. Improvements in constructs of 10 mm diameter were similarly observed.

CONCLUSIONS

This study demonstrated that more homogeneous tissue-engineered cartilage constructs with improved mechanical properties can be achieved by reducing their thickness or incorporating macroscopic nutrient channels. Our data further suggests that these macroscopic channels remain open long enough to promote this enhanced tissue development while exhibiting the potential to refill with cell elaborated matrix with additional culture time. Together with reports that <3 mm defects in cartilage heal in vivo and that irregular holes are associated with clinically used osteochondral graft procedures, we anticipate that a strategy of incorporating macroscopic channels may aid the development of clinically relevant engineered cartilage with functional properties.

Scaffold degradation elevates the collagen content and dynamic compressive modulus in engineered articular cartilage

OBJECTIVE

It was hypothesized that controlled, scaffold removal in engineered cartilage constructs would improve their collagen content and mechanical properties over time in culture.

DESIGN

Preliminary experiments characterized the effects of agarase on cell-free agarose disks and cartilage explants. Immature bovine chondrocytes were encapsulated in agarose, cultured to day 42, and incubated with 100 units/mL agarase for 48 h. After treatment, constructs were cultured to day 91. The compressive Young's modulus and dynamic modulus of the constructs were determined every 2 weeks and immediately after agarase treatment. Post-mechanical testing, constructs were processed for biochemistry and histology.

RESULTS

Agarase treatment on explants had no detrimental effect on the cartilage matrix. Treatment applied to engineered constructs on day 42 did not affect DNA or collagen content. Agarase treatment decreased tissue GAG content (via GAG loss to the media) and Young's modulus, both of which recovered to control values over time in culture. By day 91 agarase-treated constructs possessed approximately 25% more DNA, approximately 60% more collagen, and approximately 40% higher dynamic modulus compared to untreated controls.

CONCLUSIONS

Scaffold degradation increased construct collagen content and dynamic mechanical properties, affirming the experimental hypothesis. The mechanism may lie in increased nutrient transport, increased space for collagen fibril formation, and cellular response to the loss of GAG with agarase treatment. The results highlight the role of the scaffold in retaining synthesized matrix during early and late tissue formation. This work also shows promise in developing an engineered tissue that may be completely free of scaffold material for clinical implantation.

Analysis of radial variations in material properties and matrix composition of chondrocyte-seeded agarose hydrogel constructs

OBJECTIVE

To examine the radial variations in engineered cartilage that may result due to radial fluid flow during dynamic compressive loading. This was done by evaluating the annuli and the central cores of the constructs separately.

METHOD

Chondrocyte-seeded agarose hydrogels were grown in free-swelling and dynamic, unconfined loading cultures for 42 days. After mechanical testing, constructs were allowed to recover for 1-2h, the central 3mm cores removed, and the cores and annuli were retested separately. Histological and/or biochemical analyses for DNA, glycosaminoglycan (GAG), collagen, type I collagen, type II collagen, and elastin were performed. Multiple regression analysis was used to determine the correlation between the biochemical and material properties of the constructs.

RESULTS

The cores and annuli of chondrocyte-seeded constructs did not exhibit significant differences in material properties and GAG content. Annuli possessed greater DNA and collagen content over time in culture than cores. Dynamic loading enhanced the material properties and GAG content of cores, annuli, and whole constructs relative to free-swelling controls, but it did not alter the radial variations compared to free-swelling culture.

CONCLUSION

Surprisingly, the benefits of dynamic loading on tissue properties extended through the entire construct and did not result in radial variations as measured via the coring technique in this study. Nutrient transport limitations and the formation of a fibrous capsule on the periphery may explain the differences in DNA and collagen between cores and annuli. No differences in GAG distribution may be due to sufficient chemical signals and building blocks for GAG synthesis throughout the constructs.

Physiologic deformational loading does not counteract the catabolic effects of interleukin-1 in long-term culture of chondrocyte-seeded agarose constructs

An interplay of mechanical and chemical factors is integral to cartilage maintenance and/or degeneration. Interleukin-1 (IL-1) is a pro-inflammatory cytokine that is present at elevated concentrations in osteoarthritic joints and initiates the rapid degradation of cartilage when cultured in vitro. Several short-term studies have suggested that applied dynamic deformational loading may have a protective effect against the catabolic actions of IL-1. In the current study, we examine whether the long-term (42 days) application of dynamic deformational loading on chondrocyte-seeded agarose constructs can mitigate these catabolic effects. Three studies were carried out using two IL-1 isoforms (IL-1alpha and IL-1beta) in chemically defined medium supplemented with a broad range of cytokine concentrations and durations. Physiologic loading was unable to counteract the long-term catabolic effects of IL-1 under any of the conditions tested, and in some cases led to further degeneration over unloaded controls.

Molecular analysis of chondrocytes cultured in agarose in response to dynamic compression

Background

Articular cartilage is exposed to high mechanical loads under normal physiological conditions and articular chondrocytes regulate the composition of cartilaginous matrix, in response to mechanical signals. However, the intracellular pathways involved in mechanotransduction are still being defined. Using the well-characterized chondrocyte/agarose model system and dynamic compression, we report protocols for preparing and characterizing constructs of murine chondrocytes and agarose, and analyzing the effect of compression on steady-state level of mRNA by RT-PCR, gene transcription by gene reporter assay, and phosphorylation state of signalling molecules by Western-blotting. The mouse model is of particular interest because of the availability of a large choice of bio-molecular tools suitable to study it, as well as genetically modified mice.

Results

Chondrocytes cultured in agarose for one week were surrounded by a newly synthesized pericellular matrix, as revealed by immunohistochemistry prior to compression experiments. This observation indicates that this model system is suitable to study the role of matrix molecules and trans-membrane receptors in cellular responsiveness to mechanical stress. The chondrocyte/agarose constructs were then submitted to dynamic compression with FX-4000C™ Flexercell^® Compression Plus™ System (Flexcell). After clearing proteins off agarose, Western-blotting analysis showed transient activation of Mitogen-activated protein kinases (MAPK) in response to dynamic compression. After assessment by capillary electrophoresis of the quality of RNA extracted from agarose, steady-state levels of mRNA expression was measured by real time PCR. We observed an up-regulation of cFos and cJun mRNA levels as a response to compression, in accordance with the mechanosensitive character observed for these two genes in other studies using cartilage explants submitted to compression. To explore further the biological response of mouse chondrocytes to the dynamic compression at the transcriptional level, we also developed an approach for monitoring changes in gene transcription in agarose culture by using reporter promoter constructs. A decrease in promoter activity of the gene coding for type II procollagen, the most abundant protein in cartilage, was observed in response to dynamic loading.

Conclusion

The protocols developed here offer the possibility to perform an integrated analysis of the molecular mechanisms of mechanotransduction in chondrocytes, at the gene and protein level.

The effect of devitalized trabecular bone on the formation of osteochondral tissue-engineered constructs

In the current study, evidence is presented demonstrating that devitalized trabecular bone has an inhibitory effect on in vitro chondral tissue development when used as a base material for the tissue-engineering of osteochondral constructs for cartilage repair. Chondrocyte-seeded agarose hydrogel constructs were cultured alone or attached to an underlying bony base in a chemically defined medium formulation that has been shown to yield engineered cartilaginous tissue with native Young's modulus (E(Y)) and glycosaminoglycan (GAG) content. By day 42 in culture the incorporation of a bony base significantly reduced these properties (E(Y)=87+/-12 kPa, GAG=1.9+/-0.8%ww) compared to the gel-alone group (E(Y)=642+/-97 kPa, GAG=4.6+/-1.4%ww). Similarly, the mechanical and biochemical properties of chondrocyte-seeded agarose constructs were inhibited when co-cultured adjacent to bone (unattached), suggesting that soluble factors rather than direct cell-bone interactions mediate the chondro-inhibitory bone effects. Altering the method of bone preparation, including demineralization, or the timing of bone introduction in co-culture did not ameliorate the effects. In contrast, osteochondral constructs with native cartilage properties (E(Y)=730+/-65 kPa, GAG=5.2+/-0.9%ww) were achieved when a porous tantalum metal base material was adopted instead of bone. This work suggests that devitalized bone may not be a suitable substrate for long-term cultivation of osteochondral grafts.

Low-serum media and dynamic deformational loading in tissue engineering of articular cartilage

High-serum media have been shown to produce significant improvement in the properties of tissue-engineered articular cartilage when applied in combination with dynamic deformational loading. To mitigate concerns regarding the culture variability introduced by serum, we examined the interplay between low-serum/ITS-supplemented media and dynamic deformational loading. Our results show that low serum/ITS supplementation does not support the same level of tissue formation as compared to high serum controls. In free-swelling culture, using a combination of ITS with concentrations of FBS above 2% negated the beneficial effects of ITS. Although there were beneficial effects with loading and 0.2%FBS + ITS, these constructs significantly underperformed relative to 20%FBS constructs. At 2%FBS + ITS, the free-swelling construct stiffness and composition approached or exceeded that of 20%FBS constructs. With dynamic loading, the properties of 2%FBS + ITS constructs were significantly lower than free-swelling controls and 20%FBS constructs by day 42. By priming the chondrocytes in 20%FBS prior to exposure to low-serum/ITS media, we observed that low-serum/ITS media produced significant enhancement in tissue properties compared to constructs grown continuously in 20%FBS.

Effects of confinement on the mechanical properties of self-assembled articular cartilage constructs in the direction orthogonal to the confinement surface

This study examined the effects of radial confinement and passive axial compression-induced vertical confinement, on the biomechanical, biochemical, and histological properties of self-assembled chondrocyte constructs. The self-assembled constructs, engineered without the use of an exogenous scaffold, exhibited significant increases in stiffness in the direction orthogonal to that of the confinement surface. With radial confinement, the significantly increased aggregate modulus was accompanied by increased collagen organization in the direction perpendicular to the articular surface, with no change in collagen or glycosaminoglycan (GAG) content. Additionally, radial confinement was most beneficial when applied before 2 weeks. With passive axial compression, the significantly increased Young's modulus and ultimate tensile strength were accompanied by a significant increase in collagen production. This study is the first to demonstrate the beneficial effects of confinement on tissue engineered constructs in the direction orthogonal to that of the confinement surface.

The beneficial effect of delayed compressive loading on tissue-engineered cartilage constructs cultured with TGF-beta3

OBJECTIVE

To determine whether the functional properties of tissue-engineered constructs cultured in a chemically-defined medium supplemented briefly with TGF-beta3 can be enhanced with the application of dynamic deformational loading.

METHODS

Primary immature bovine cells (2-3 months old) were encapsulated in agarose hydrogel (2%, 30 x 10(6)cells/ml) and cultured in chemically-defined medium supplemented for the first 2 weeks with transforming growth factor beta 3 (TGF-beta3) (10 microg/ml). Physiologic deformational loading (1 Hz, 3 h/day, 10% unconfined deformation initially and tapering to 2% peak-to-peak deformation by day 42) was applied either concurrent with or after the period of TGF-beta3 supplementation. Mechanical and biochemical properties were evaluated up to day 56.

RESULTS

Dynamic deformational loading applied concurrently with TGF-beta3 supplementation yielded significantly lower (-90%) overall mechanical properties when compared to free-swelling controls. In contrast, the same loading protocol applied after the discontinuation of the growth factor resulted in significantly increased (+10%) overall mechanical properties relative to free-swelling controls. Equilibrium modulus values reach 1306+/-79 kPa and glycosaminoglycan levels reach 8.7+/-1.6% w.w. during this 8-week period and are similar to host cartilage properties (994+/-280 kPa, 6.3+/-0.9% w.w.).

CONCLUSIONS

An optimal strategy for the functional tissue engineering of articular cartilage, particularly to accelerate construct development, may incorporate sequential application of different growth factors and applied deformational loading.

Culture duration modulates collagen hydrolysate-induced tissue remodeling in chondrocyte-seeded agarose hydrogels

Media supplementation with collagen hydrolysate was hypothesized to increase the collagen content in engineered cartilage. By d28, hydrolysate at 0.5 mg/mL increased type II collagen content and 1 mg/mL increased mechanical properties, total collagen content, and type II collagen content over controls. By d42, however, controls possessed the highest GAG content and compressive Young's modulus. Real-time PCR found that 1 mg/mL increased type II collagen gene expression in d0 constructs, but increased MMP expression with no effect on type II collagen on d28. A 10 mg/mL concentration produced the lowest tissue properties, the lowest type II collagen gene expression on d0, and the highest MMP gene expression on d28. These results indicate that the duration of culture modulates the response of chondrocytes to collagen hydrolysate in 3D culture, transforming the response from positive to negative. Therefore, collagen hydrolysate as a media supplement is not a viable long-term method to improve the collagen content of engineered cartilage tissue.