Mechanical compression and hydrostatic pressure induce reversible changes in actin cytoskeletal organisation in chondrocytes in agarose

Matrix accumulation by articular chondrocytes during mechanical stimulation is influenced by integrin-mediated cell spreading

We have shown previously that cyclic compression of newly forming bioengineered cartilage in vitro results in improved tissue formation via changes in expression of matrix metalloproteases, such as, MT1-MMP (membrane type metalloprotease), and increased synthesis of matrix molecules. Several studies have suggested an association between MT1-MMP and integrins, which are known to influence cell shape. Thus, the objectives of this study were to determine the effect of compressive mechanical stimulation on cell shape and the role of integrins and MT1-MMP in mediating these changes and influencing matrix accumulation. Bovine articular chondrocytes were grown on the surface of a porous ceramic substrate for 72 h and then cyclically compressed for 30 min. Scanning electron microscopy and morphometric analysis demonstrated that compression induced a rapid, transient increase in chondrocyte spreading by 10 min, followed by a retraction to prestimulated size within 6 h. This was associated with increased accumulation of newly synthesized proteoglycans, as determined by quantification of radioisotope incorporation. Blocking the alpha5beta1 integrin, or its beta1 subunit, inhibited cell spreading and resulted in a partial inhibition of compression-induced increase in matrix accumulation. Knockdown of MT1-MMP expression partially inhibited cell retraction and resulted in a reduced matrix accumulation as well. These results suggest that chondrocyte spreading and retraction following cyclic compression in vitro regulates matrix accumulation. Understanding the mechanisms that regulate chondrocyte mechanotransduction may ultimately lead to the design of improved repair tissue for cartilage damage. (c) 2010 Wiley Periodicals, Inc. J Biomed Mater Res, 2010.

Development of a micromanipulator-based loading device for mechanoregulation study of human mesenchymal stem cells in three-dimensional collagen constructs

Mechanical signal is important for regulating cellular activities, including proliferation, metabolism, matrix production, and orientation. Bioreactors with loading functions can be used to precondition cells in three-dimensional (3D) constructs so as to study the cellular responses to mechanical stimulation. However, full-scale bioreactor is not always an affordable option considering the high cost of equipment and the liter-sized medium with serum and growth factor supplements. In this study, a custom-built loading system was developed by coupling a conventional camera-equipped inverted research microscope with two micromanipulators. The system was programmed to deliver either cyclic compressive loading with different frequencies or static compressive loading for 1 week to investigate the cellular responses of human mesenchymal stem cells (hMSCs) entrapped in a 3D construct consists of reconstituted collagen fibers. Cellular properties, including their alignment, cytoskeleton, and cell metabolism, and properties of matrix molecules, such as collagen fiber alignment and glycosaminoglycan deposition, were evaluated. Using a MatLab-based image analysis program, reorientation of the entrapped cells from a random distribution to a preferred alignment along the loading direction in constructs with both static and cyclic compression has been demonstrated, but no such alignment was found in the free-floating controls. Fluorescent staining on filamentous actin cytoskeleton also confirmed the finding. Nevertheless, the collagen fiber meshwork entrapping the hMSCs remained randomly distributed, and no change in cellular metabolism and glycosaminoglycans production was noted. The current study provides a simple and affordable option toward setting up a mechanoregulation facility based on existing laboratory equipment and sheds new insights on the effect of mechanical loading on the alignment of hMSCs in 3D collagen constructs.

Rho kinase-dependent CCL20 induced by dynamic compression of human chondrocytes

OBJECTIVE

Mechanical stimulation of cartilage affects tissue homeostasis and chondrocyte function. The chondrocyte phenotype is dependent on cell shape, which is largely determined by the actin cytoskeleton. Reorganization of the actin cytoskeleton results from Rho GTPase activation. The purpose of this study was to examine the roles of both actin and Rho in mechanotransduction in chondrocytes.

METHODS

We embedded human articular chondrocytes in 2 x 6-mm agarose discs at 5 x 10(6) cells/ml and subjected the discs to unconfined dynamic compression at 0.5 Hz. By comparing samples with and without dynamic compression, we identified Rho activation according to the GTP-bound active RhoA measured in cell lysates. We identified rearrangements in filamentous actin structures using fluorescence-labeled phalloidin and confocal microscopy of fixed samples. We identified altered gene expression using TaqMan quantitative reverse transcription-polymerase chain reaction analysis. We tested for a requirement for Rho signaling by performing the dynamic compression in the presence of Rho kinase inhibitors.

RESULTS

RhoA activation occurred within 5-10 minutes of dynamic compression. Rho kinase-dependent actin reorganization occurred within 20 minutes after application of dynamic compression and was apparent as "punctate" F-actin structures that were visible under confocal microscopy. We identified early-phase mechanoresponsive genes (CCL20 and inducible nitric oxide synthase) that were highly up-regulated within 1 hour of dynamic compression in a Rho kinase-dependent and actin-dependent manner.

CONCLUSION

Together, these results are the first demonstration that the Rho-Rho kinase pathway and actin cytoskeletal reorganization are required for changes in the expression of genes involved in human chondrocyte mechanotransduction.

Signalling cascades in mechanotransduction: cell-matrix interactions and mechanical loading

Mechanical loading of articular cartilage stimulates the metabolism of resident chondrocytes and induces the synthesis of molecules to maintain the integrity of the cartilage. Mechanical signals modulate biochemical activity and changes in cell behavior through mechanotransduction. Compression of cartilage results in complex changes within the tissue including matrix and cell deformation, hydrostatic and osmotic pressure, fluid flow, altered matrix water content, ion concentration and fixed charge density. These changes are detected by mechanoreceptors on the cell surface, which include mechanosensitive ion channels and integrins that on activation initiate intracellular signalling cascades leading to tissue remodelling. Excessive mechanical loading also influences chondrocyte metabolism but unlike physiological stimulation leads to a quantitative imbalance between anabolic and catabolic activity resulting in depletion of matrix components. In this article we focus on the role of mechanical signalling in the maintenance of articular cartilage, and discuss how alterations in normal signalling can lead to pathology.

Involvement of the cytoskeletal elements in articular cartilage homeostasis and pathology

The cytoskeleton of all cells is a three-dimensional network comprising actin microfilaments, tubulin microtubules and intermediate filaments. Studies in many cell types have indicated roles for these cytoskeletal proteins in many diverse cellular processes including alteration of cell shape, movement of organelles, migration, endocytosis, secretion, cell division and extracellular matrix assembly. The cytoskeletal networks are highly organized in structure enabling them to fulfil their biological functions. This review will primarily focus on the organization and function of the three major cytoskeletal networks in articular cartilage chondrocytes. Articular cartilage is a major load-bearing tissue of the synovial joint; it is well known that the cytoskeleton acts as a physical interface between the chondrocytes and the extracellular matrix in 'sensing' mechanical stimuli. The effect of mechanical load on cytoskeletal element expression and organization will also be reviewed. Abnormal mechanical load is widely believed to be a risk factor for the development of osteoarthritis. Several studies have intimated that the major cytoskeletal networks are disorganized or often absent in osteoarthritic cartilage chondrocytes. The implications and possible reasoning for this are more widely discussed and placed into context with their potential relevance to disease and therapeutic strategies.

Novel electrospun scaffolds for the molecular analysis of chondrocytes under dynamic compression

Mechanical training of engineered tissue constructs is believed necessary to improve regeneration of cartilaginous grafts. Nevertheless, molecular mechanisms underlying mechanical activation are not clear. This is partly due to unavailability of appropriate scaffolds allowing exposure of cells to dynamic compressive strains (DCS) in vitro while permitting subsequent molecular analyses. We demonstrate that three-dimensional macroporous electrospun poly(epsilon-caprolactone) scaffolds can be fabricated that are suitable for the functional and molecular analysis of dynamically loaded chondrocytes. These scaffolds encourage chondrocytic proliferation promoting expression of collagen type II, aggrecan, and Sox9 while retaining mechanical strength after prolonged dynamic compression. Further, they exhibit superior infiltration of exogenous agents into the cells and permit easy retrieval of cellular components postcompression to allow exploration of molecular mechanisms of DCS. Using these scaffolds, we observed that chondrocytes responded to DCS in a magnitude-dependent manner exhibiting antiinflammatory and proanabolic responses at low physiological magnitudes. Proinflammatory responses and decreased cellular viability were observed at hyperphysiological magnitudes. These scaffolds provide a means of unraveling the mechanotransduction-induced transcriptional and posttranslational activities involved in cartilage regeneration and repair.

Zonal variations in cytoskeletal element organization, mRNA and protein expression in the intervertebral disc

The intervertebral disc is important in maintaining flexibility and dissipating loads applied to the spine. The disc comprises a heterogeneous population of cells, including those of the nucleus pulposus and annulus fibrosus, which are diverse in phenotype, partly due to the different mechanical loads they experience. Several studies have implicated the cytoskeleton in mechanotransduction, but little characterization of the three major cytoskeletal elements--actin, tubulin and vimentin--in the intervertebral disc has been undertaken. In this study we show that there are differences in both the organization and the amounts of these cytoskeletal proteins across the regions of immature bovine intervertebral disc (nucleus pulposus and outer annulus fibrosus), which differs with skeletal maturity. These differences are likely to reflect the diverse mechanical characteristics of the disc regions, and the loads that they experience, i.e. tension in the annulus fibrosus and compression in the nucleus pulposus. Alterations to the organization and amount of cytoskeletal element proteins may change the ability of the cells to respond to mechanical signals, with a loss of tissue homeostasis, suggesting that the cytoskeleton has a potential role in intervertebral disc degeneration.

Influence of cartilaginous matrix accumulation on viscoelastic response of chondrocyte/agarose constructs under dynamic compressive and shear loading

A method has been developed to restore cartilage defects by culturing autologous chondrocytes to create a three dimensional tissue and then implanting the cultured tissue. In this kind of approach, it is important to characterize the dynamic mechanical behavior of the regenerated cartilaginous tissue, because these tissues need to bear various dynamic loadings in daily life. The objectives of this study were to evaluate in detail the dynamic viscoelastic responses of chondrocyte-seeded agarose gel cultures in compression and torsion (shear) and to determine the relationships between these mechanical responses and biochemical composition. The results showed that both the dynamic compressive and shear stiffness of the cultured constructs increased during culture. The relative energy dissipation in dynamic compression decreased, whereas that in dynamic shear increased during culture. Furthermore, correlation analyses showed that the sulfated glycosaminoglycan (sGAG) content of the cultured construct showed significant correlations with the dynamic modulus in both compression and shear situations. On the other hand, the loss tangent in dynamic compression, which represents the relative energy dissipation capability of the constructs, showed a low correlation with the sGAG content, whereas this capability in shear exhibited moderate correlation. In conclusion, we explored the dynamic viscoelasticity of the tissue-engineered cartilage in dynamic compression and shear, and determined correlations between viscoelasticity and biochemical composition.

Cyclic Hydraulic Pressure and Fluid Flow Differentially Modulate Cytoskeleton Re-Organization in MC3T3 Osteoblasts

Mechanical loads are essential towards maintaining bone mass and skeletal integrity. Such loads generate various stimuli at the cellular level, including cyclic hydraulic pressure (CHP) and fluid shear stress (FSS). To gain insight into the anabolic responses of osteoblasts to CHP and FSS, we subjected MC3T3-E1 preosteoblasts to either FSS (12 dynes/cm(2)) or CHP varying from 0 to 68 kPa at 0.5 Hz. As with FSS, CHP produced a significant increase in ATP release over static controls within 5 min of onset. Cell stiffness examined by atomic force microscopy increased after 15 min of either CHP or FSS stimulation, which was attenuated when extracellular ATP was hydrolyzed with apyrase. As previously shown FSS induced polymerization of actins into stress fibers. However, the microtubule network was completely disrupted under FSS. In contrast, CHP appeared to maintain strong microtubule and f-actin networks. The purinergic signaling was found to be involved in the remodeling of f-actin, but not microtubule. Both CHP and FSS applied for 1 hour increased expression of COX-2. These data indicate that, while CHP and FSS produce similar anabolic responses, these stimuli have very different effects on the cytoskeleton remodeling and could contribute to loss of mechanosensitivity with extended loading.

Synergistic effect of chondroitin sulfate and cyclic pressure on biochemical and morphological properties of chondrocytes from articular cartilage

OBJECTIVE

To investigate the synergistic effect of chondroitin sulfate (CS) and cyclic pressure on the biochemical and morphological properties of chondrocytes isolated from articular cartilage and cultured in alginate matrix.

METHODS

The chondrocytes obtained from articular cartilage of goat femoropatellar joint were isolated and cultured in alginate matrix. The cells were exposed to CS (100 microg/ml) along with cyclic pressure of 1.2 MPa and 2.4 MPa and biochemical analysis of DNA, proteoglycan, collagen and protease activity was carried out in different matrix fractions, i.e., cellular matrix (CM) and further removed matrix (FRM) and in culture medium. The morphological studies of chondrocytes were carried out using transmission electron microscopy (TEM).

RESULTS

The treatment of chondrocytes with CS along with cyclic pressure increased the rate of cell proliferation relative to control (without load and in the absence of CS) and CS alone (P<0.001). The proteoglycan content in CM increased in the presence of CS alone (P<0.05) as well as CS with cyclic pressure (P<0.001). The specific activity of protease in CM and FRM decreased in the presence of CS with cyclic pressure relative to control (P<0.001). The TEM images showed abundant CM, improved cell morphology and matrix organization in the presence of CS and cyclic load treatment.

CONCLUSIONS

The results of this study suggested that in the presence of CS along with cyclic loading, the cellular ability to utilize and incorporate exogenous CS as extracellular matrix improved, as compared to CS alone.

Changes in surface topologies of chondrocytes subjected to mechanical forces: an AFM analysis

The cartilage is composed of chondrocytes embedded in a matrix of collagen fibrils interspersed within a network of proteoglycans and is constantly exposed to biomechanical forces during normal joint movement. Characterization of the surface morphology, cytoskeletal structure, adherance and elastic properties of these mechanosensitive cells are crucial in understanding the effects of mechanical forces around a cell and how a cell responds to changes in its physical environment. In this work, we employed the atomic force microscope (AFM) to image cultured chondrocytes before and after subjecting them to mechanical forces in the presence or absence of interleukin-1beta to mimic inflammatory conditions. Nanoscale imaging and quantitative measurements from AFM data revealed that there are distinct changes in cell-surface topology and cytoskeleton arrangement in the cells following treatment with mechanical forces, IL-1beta or both. Our findings for the first time demonstrate that cultured chondrocytes are amenable to high-resolution AFM imaging and dynamic tensile forces may help overcome the effect of inflammatory factors on chondrocyte response.

Development of a cell culture system loading cyclic mechanical strain to chondrogenic cells

Mechanical stimulation is considered to be one of the major epigenetic factors regulating the metabolism, proliferation, survival and differentiation of cells in the skeletal tissues. It is generally accepted that the cytoskeleton can undergo remodeling in response to mechanical stimuli such as tensile strain or fluid flow. Mechanically induced cell deformation is one of the possible mechanotransduction pathways by which chondrocytes sense and respond to changes in their mechanical environment. Mechanical strain has a variety of effects on the structure and function of their cells in the skeletal tissues, such as chondrocytes, osteoblasts and fibroblasts. However, little is known about the effect of the quality and quantity of mechanical strain and the timing of mechanical loading on the differentiation of these cells. The present study was designed to investigate the effect of the deformation of chondrogenic cells, and cyclic compression using a newly developed culture device, by analyzing mechanobiological response to the differentiating chondrocytes. Cyclic compression between 0 and 22% strains, at 23 microHz was loaded on chondrogenic cell line ATDC5 by seeding in a mass mode on PDMS membrane, assuming direct transfer of cyclic deformation from the membrane to the cells at the same frequency. The compressive strain, induced within the membrane, was characterized based on the analysis of the finite element modeling (FEM). The results showed that the tensile strain inhibits the chondrogenic differentiation of ATDC5 cells, whereas the compressive strain enhances the chondrogenic differentiation, suggesting that the differentiation of the chondrogenic cells could be controlled by the amount and the mode of strain. In conclusion, we have developed a unique strain loading culture system to analyze the effect of various types of mechanical stimulation on various cellular activities.

Regulation of chondrocytic gene expression by biomechanical signals

Cartilage is a mechanosensitive tissue, which means that it can perceive and respond to biomechanical signals. Despite the known importance of biomechanical signals in the etiopathogenesis of arthritic diseases and their effectiveness in joint restoration, little is understood about their actions at the cellular level. Recent molecular approaches have revealed that specific biomechanical stimuli and cell interactions generate intracellular signals that are powerful inducers or suppressors of proinflammatory and reparative genes in chondrocytes. Biomechanical signals are perceived by cartilage in magnitude-, frequency-, and time-dependent manners. Static and dynamic biomechanical forces of high magnitudes induce proinflammatory genes and inhibit matrix synthesis. Contrarily, dynamic biomechanical signals of low/physiologic magnitudes are potent antiinflammatory signals that inhibit interleukin-1beta (IL-1beta)-induced proinflammatory gene transcription and abrogate IL-1beta/tumor necrosis factor-alpha-induced inhibition of matrix synthesis. Recent studies have identified nuclear factor-kB (NF-kB) transcription factors as key regulators of biomechanical signal-mediated proinflammatory and antiinflammatory actions. These signals intercept multiple steps in the NF-kappaB signaling cascade to regulate cytokine gene expression. Taken together, these findings provide insight into how biomechanical signals regulate inflammatory and reparative gene transcription, underscoring their potential in enhancing the ability of chondrocytes to curb inflammation in diseased joints.

Effects of tensile and compressive strains on response of a chondrocytic cell line embedded in type I collagen gel

Tensile and compressive strains are commonly used in mechanobiological models. Here we report on the development of a novel three-dimensional cell-culture method, which allows both tensile and compressive loads to be applied. Preliminary results were obtained using HCS2/8 chondrocytic cells embedded in type I collagen gel. This construct was subjected to either 16% tension or 14% compression. Confocal laser scanning microscopy showed that both tension and compression caused significant cell deformation. The collagen gel-embedded HCS2/8 cells were subjected to static tension, dynamic tension, static compression or dynamic compression for 24h. Dynamic compression led to significantly decreased 5-bromo-2'-deoxyuridine incorporation compared with the control group. PCR analysis revealed upregulation of type II collagen caused by dynamic tension, upregulation of aggrecan caused by static compression, and downregulation of type II collagen and aggrecan caused by dynamic compression. Nitric oxide production was significantly increased by static tension and static compression compared with the control group. Our experimental system effectively applied several types of strain to HCS2/8 cells embedded in collagen gel. Our results suggest that the mode of mechanical strain affects the response of HCS2/8 cells.

Modulation of cellular mechanics during osteogenic differentiation of human mesenchymal stem cells

Recognition of the growing role of human mesenchymal stem cells (hMSC) in tissue engineering and regenerative medicine requires a thorough understanding of intracellular biochemical and biophysical processes that may direct the cell's commitment to a particular lineage. In this study, we characterized the distinct biomechanical properties of hMSCs, including the average Young's modulus determined by atomic force microscopy (3.2 +/- 1.4 kPa for hMSC vs. 1.7 +/- 1.0 kPa for fully differentiated osteoblasts), and the average membrane tether length measured with laser optical tweezers (10.6 +/- 1.1 microm for stem cells, and 4.0 +/- 1.1 microm for osteoblasts). These differences in cell elasticity and membrane mechanics result primarily from differential actin cytoskeleton organization in these two cell types, whereas microtubules did not appear to affect the cellular mechanics. The membrane-cytoskeleton linker proteins may contribute to a stronger interaction of the plasma membrane with F-actins and shorter membrane tether length in osteoblasts than in stem cells. Actin depolymerization or ATP depletion caused a two- to threefold increase in the membrane tether length in osteoblasts, but had essentially no effect on the stem-cell membrane tethers. Actin remodeling in the course of a 10-day osteogenic differentiation of hMSC mediates the temporally correlated dynamical changes in cell elasticity and membrane mechanics. For example, after a 10-day culture in osteogenic medium, hMSC mechanical characteristics were comparable to those of mature bone cells. Based on quantitative characterization of the actin cytoskeleton remodeling during osteodifferentiation, we postulate that the actin cytoskeleton plays a pivotal role in determining the hMSC mechanical properties and modulation of cellular mechanics at the early stage of stem-cell osteodifferentiation.

Loading alters actin dynamics and up-regulates cofilin gene expression in chondrocytes

Chondrocyte mechanotransduction in response to mechanical loading is essential for the health and homeostasis of articular cartilage. The actin cytoskeleton has been implicated in cell mechanics and mechanotransduction. This study tests the hypothesis that loading modulates actin dynamics and organisation with subsequent changes in gene expression for actin associated proteins. Chondrocytes were transfected with eGFP-actin, seeded in agarose and subjected to cyclic compression (10 cycles, 1 Hz, 0-15% strain) on the stage of a confocal microscope. Compression resulted in a subsequent reduction in cortical eGFP-actin intensity and a reduction in fluorescence recovery after photobleaching (FRAP), suggesting net cortical actin de-polymerisation, compared to unloaded controls. Cyclic compression for 10 min up-regulated gene expression for the actin depolymerising proteins, cofilin and destrin. Thus mechanical loading alters cortical actin dynamics, providing a potential mechanism through which chondrocytes can adapt their mechanical properties and mechanosensitivity to the local mechanical environment.

Cytoskeletal changes of mesenchymal stem cells during differentiation

Mesenchymal stem cells (MSCs) are progenitors for tissues such as bone and cartilage. In this report, the actin cytoskeleton and nanomechanobiology of human mesenchymal stem cells (hMSCs) were studied using fluorescence microscopy and atomic force microscopy (AFM). Human MSCs were differentiated into chondrocytes and osteoblasts as per previous approaches. Cytochalasin D (CytD) was used to temporarily disrupt cytoskeleton in hMSCs, hMSC-chondrocytes (hMSC-Cys) and hMSC-osteoblasts (hMSC-Obs). Fluorescence microscopy revealed a dose-dependent response to CytD. Removal of CytD from the media of cytoskeleton-disrupted cells led to the recovery of the cytoskeletal structures, as confirmed by both fluorescence microscopy and AFM. Force-volume imaging by AFM evaluated the nanomechanics of all three cell types before, during, and after CytD treatment. Cytochalasin D disruption of cytoskeleton had marked effects on hMSCs and hMSC-Cys, in comparison with limited cytoskeleton disruption in hMSC-Obs, as confirmed qualitatively by fluorescence microscopy and quantitatively by AFM. Treatment with CytD resulted in morphology changes of all cell types, with significant decreases in the observed Young's Moduli of hMSCs and hMSC-Cys. These data suggest human mesenchymal stem cells alter their cytoskeletal components during differentiation. Additional studies will address the mechanisms of cytoskeletal changes using biochemical and biophysical methods.

Histological assessments on the abnormalities of mouse epiphyseal chondrocytes with short term centrifugal loading

We have examined the morphological changes in chondrocytes after exposure to experimental hypergravity. Tibial epiphyseal cartilages of 17-days-old mouse fetuses were exposed to centrifugation at 3G for 16 h mimicking hypergravitational environment (experimental group), or subjected to stationary cultures (control group). Centrifugation did not affect the sizes of epiphyseal cartilage, chondrocyte proliferation, type X collagen-positive hypertrophic zone, and the mRNA expressions of parathyroid hormone-related peptide and fibroblast growth factor receptor III. However, centrifuged chondrocytes showed abnormal morphology and aberrant spatial arrangements, resulting in disrupted chondrocytic columns. Through histochemical assessments, actin filaments were shown to distribute evenly along cell membranes of control proliferative chondrocytes, while chondrocytes subjected to centrifugal force developed a thicker layer of actin filaments. Transmission electron microscopic observations revealed spotty electron-dense materials underlying control chondrocytes' cell membranes, while experimental chondrocytes showed their thick layer. In the intracolumnar regions of the control cartilage, longitudinal electron-dense fibrils were associated with short cytoplasmic processes of normal chondrocytes, indicating assumed cell-tomatrix interactions. These extracellular fibrils were disrupted in the centrifuged samples. Summarizing, altered actin filaments associated with cell membranes, irregular cell shape and disappearance of intracolumnar extracellular fibrils suggest that hypergravity disturbs cell-to-matrix interactions in our cartilage model.

Regulation of Cartilaginous ECM Gene Transcription by Chondrocytes and MSCs in 3D Culture in Response to Dynamic Loading

This study explored the biologic response of chondrocytes and mesenchymal stem cells (MSCs) to a dynamic mechanical loading regime. We developed a time-efficient methodology for monitoring regional changes in extracellular matrix gene transcription using reporter promoter constructs. Specifically, transfected cells were homogenously distributed throughout agarose hydrogel constructs, and spatial and temporal gene expression and the ability to form functional ECM were analyzed in response to dynamic mechanical stimuli. Theoretical analyses were used to predict the physical signals generated within the gel in response to these loading regimes. Using a custom compression bioreactor system, changes in aggrecan and type II collagen promoter activity in transfected chondrocyte-laden cylindrical constructs were evaluated in response to a range of loading frequencies and durations. In general, aggrecan promoter activity increased with increasing duration of loading, particularly in the outer annulus region. Interestingly, type II collagen promoter activity decreased in this annular region under identical loading conditions. In addition, we explored the role of mechanical compression in directing chondrogenic differentiation of MSCs by monitoring short-term aggrecan promoter activity. As an example of long-term utility, a specific loading protocol was applied to MSC-laden constructs for 5 days, and the resultant changes in glycosaminoglycan (GAG) production were evaluated over a 4-week period. This dynamic loading regime increased not only short-term aggrecan transcriptional activity but also GAG deposition in long-term culture. These results demonstrate the utility of a new reporter promoter system for optimizing loading protocols to improve the outcome of engineered chondrocyte- and MSC-laden cartilaginous constructs.

Chondrocyte deformation induces mitochondrial distortion and heterogeneous intracellular strain fields

Chondrocyte mechanotransduction is poorly understood but may involve cell deformation and associated distortion of intracellular structures and organelles. This study quantifies the intracellular displacement and strain fields associated with chondrocyte deformation and in particular the distortion of the mitochondria network, which may have a role in mechanotransduction. Isolated articular chondrocytes were compressed in agarose constructs and simultaneously visualised using confocal microscopy. An optimised digital image correlation technique was developed to calculate the local intracellular displacement and strain fields using confocal images of fluorescently labelled mitochondria. The mitochondria formed a dynamic fibrous network or reticulum, which co-localised with microtubules and vimentin intermediate filaments. Cell deformation induced distortion of the mitochondria, which collapsed in the axis of compression with a resulting loss of volume. Compression generated heterogeneous intracellular strain fields indicating mechanical heterogeneity within the cytoplasm. The study provides evidence supporting the potential involvement of mitochondrial deformation in chondrocyte mechanotransduction, possibly involving strain-mediated release of reactive oxygen species. Furthermore the heterogeneous strain fields, which appear to be influenced by intracellular structure and organisation, may generate significant heterogeneity in mechanotransduction behaviour for cells subjected to identical levels of deformation.