Influence of microcalcifications on vulnerable plaque mechanics using FSI modeling

Computational assessment of the fractional flow reserve from intravascular ultrasound and coronary angiography data: a pilot study

Cardiovascular disease is one of the primary causes of morbidity and mortality around the globe. Thus, the diagnosis of critical lesions in coronary arteries is of utmost importance in clinical practice. One useful and efficient method to assess the functional severity of one or multiple lesions in a coronary artery is the calculation of the fractional flow reserve (FFR). In the current work, we present a method which allows the calculation of the FFR value computationally, without the use of a pressure wire and the induction of hyperemia, using intravascular ultrasound (IVUS) and biplane angiography images for three-dimensional (3D) coronary artery reconstruction and measurements of the volumetric flow rate derived from angiographic sequences. The simulated FFR values were compared to the invasively measured FFR values in 7 cases, presenting high correlation (r=0.85) and good agreement (mean difference=0.002). FFR assessment without employing a pressure wire and the induction of hyperemia is feasible using 3D reconstructed coronary artery models from angiographic and IVUS data coupled with computational fluid dynamics.

Diabetes modifies the relationships among carotid plaque calcification, composition and inflammation

BACKGROUND AND AIMS

Diabetes is traditionally associated with vascular calcification, but the molecular mechanisms are largely unknown. We herein explored the relationships among carotid plaque calcification, composition and gene expression, and how these are modified by diabetes.

METHODS

We collected carotid endoarterectomy specimen from 59 patients, of whom 23 had diabetes. We analysed histology with pentachromic staining, calcification with Alizarin red and Von Kossa's staining, chemical calcium extraction and quantification, as well as gene expression by quantitative PCR.

RESULTS

We detected no differences in the extent of plaque calcification and in plaque composition between diabetic and non-diabetic patients. In non-diabetic plaques, calcium content was directly correlated with the area occupied by muscle/fibrinoid tissue and inversely correlated with collagen, but such correlations were not seen in plaques from diabetic patients. While consistent correlations were found between calcium content and RUNX2 (direct), as well as Osteopontin (inverse), diabetes modified the association between plaque calcification and inflammatory gene expression. Only in diabetic plaques, calcium content was inversely correlated with MCP1 and IL1b, whereas the direct correlation with TNF-alpha expression seen in non-diabetic plaques was lost in diabetes.

CONCLUSIONS

Though plaque composition and calcification were not quantitatively affected, diabetes modified the relationships between plaque calcium, composition and inflammation. These results suggest that the mechanisms and the clinical significance of atherosclerotic calcification in diabetic may be different than in non-diabetic patients.

Patient-specific simulation of coronary artery pressure measurements: an in vivo three-dimensional validation study in humans

Pressure measurements using finite element computations without the need of a wire could be valuable in clinical practice. Our aim was to compare the computed distal coronary pressure values with the measured values using a pressure wire, while testing the effect of different boundary conditions for the simulation. Eight coronary arteries (lumen and outer vessel wall) from six patients were reconstructed in three-dimensional (3D) space using intravascular ultrasound and biplane angiographic images. Pressure values at the distal and proximal end of the vessel and flow velocity values at the distal end were acquired with the use of a combo pressure-flow wire. The 3D lumen and wall models were discretized into finite elements; fluid structure interaction (FSI) and rigid wall simulations were performed for one cardiac cycle both with pulsatile and steady flow in separate simulations. The results showed a high correlation between the measured and the computed coronary pressure values (coefficient of determination [r²] ranging between 0.8902 and 0.9961), while the less demanding simulations using steady flow and rigid walls resulted in very small relative error. Our study demonstrates that computational assessment of coronary pressure is feasible and seems to be accurate compared to the wire-based measurements.

Spotty calcification and plaque vulnerability in vivo: frequency-domain optical coherence tomography analysis

BACKGROUND

Spotty calcification is a morphological characteristic of a vulnerable plaque phenotype. While this calcium pattern is considered an active process, promoted by inflammation, it is unknown whether spotty calcification associates with development of microstructures observed in vulnerable plaques. As frequency-domain optical coherence tomography (FD-OCT) enables visualization of microstructures associated with plaque vulnerability, we investigated the association between spotty calcification and plaque microstructures by using FD-OCT.

METHODS

A total of 300 patients with stable coronary artery disease (CAD), having clinical indication for percutaneous coronary intervention (PCI), were analyzed. Totally 280 non-culprit lipid plaques within the target vessel requiring PCI were evaluated by FD-OCT. Spotty calcification was defined as a presence of lesion <4 mm in length, containing an arc of calcification <90° on FD-OCT. Plaque microstructures were compared in non-culprit lipid-rich plaques with and without spotty calcification.

RESULTS

Spotty calcification was observed in 39.6% of non-culprit lipid-rich plaques, with 30.6% of these plaques demonstrating multiple spotty calcifications. Plaques containing spotty calcification exhibited a greater lipid index (= averaged lipid arc × lipid length); 1,511.8±1,522.3 vs. 815.2±1,040.3 mm°, P<0.0001), thinner fibrous caps (89.0±31.6 vs. 136.5±32.5 µm, P=0.002) and a higher prevalence of microchannels (45.9% vs. 17.7%, P=0.007). A significant association was observed between the number of spotty calcifications per plaque and fibrous cap thickness (r=-0.40, P=0.006). Increased number of spotty calcification was also associated with a higher prevalence of microchannel within plaques (P=0.01).

CONCLUSIONS

In patients with stable CAD requiring PCI, the presence of spotty calcification imaged by FD-OCT was associated with features of greater plaque vulnerability.

Assessing the hemodynamic influence between multiple lesions in a realistic right coronary artery segment: A computational study

Coronary artery disease is the primary cause of morbidity and mortality worldwide. Therefore, detailed assessment of lesions in the coronary vasculature is critical in current clinical practice. Fractional flow reserve (FFR) has been proven as an efficient method for assessing the hemodynamic severity of a coronary stenosis. However, functional assessment of a coronary segment with multiple stenoses (≥ 2) remains complex for guiding the strategy of percutaneous coronary intervention due to the hemodynamic interplay between adjacent stenoses. In this work, we created four 3-dimensional (3D) arterial models that derive from a healthy patient-specific right coronary artery segment. The initial healthy model was reconstructed using fusion of intravascular ultrasound (IVUS) and biplane angiographic patient data. The healthy 3D model presented a measured FFR value of 0.96 (pressure-wire) and a simulated FFR value of 0.98. We then created diseased models with two artificial sequential stenoses of 90% lumen area reduction or with the proximal and distal stenosis separately. We calculated the FFR value for each case: 0.65 for the case with the two stenoses, 0.73 for the case with the distal stenosis and 0.90 for the case with the proximal stenosis. This leads to the conclusion that although both stenoses had the same degree of lumen area stenosis, there was a large difference in hemodynamic severity, thereby indicating that angiographic lumen assessment by itself is often not adequate for accurate assessment of coronary lesions.

Progression of abdominal aortic aneurysm towards rupture: refining clinical risk assessment using a fully coupled fluid-structure interaction method

Rupture of abdominal aortic aneurysm (AAA) is associated with high mortality rates. Risk of rupture is multi-factorial involving AAA geometric configuration, vessel tortuosity, and the presence of intraluminal pathology. Fluid structure interaction (FSI) simulations were conducted in patient based computed tomography scans reconstructed geometries in order to monitor aneurysmal disease progression from normal aortas to non-ruptured and contained ruptured AAA (rAAA), and the AAA risk of rupture was assessed. Three groups of 8 subjects each were studied: 8 normal and 16 pathological (8 non-ruptured and 8 rAAA). The AAA anatomical structures segmented included the blood lumen, intraluminal thrombus (ILT), vessel wall, and embedded calcifications. The vessel wall was described with anisotropic material model that was matched to experimental measurements of AAA tissue specimens. A statistical model for estimating the local wall strength distribution was employed to generate a map of a rupture potential index (RPI), representing the ratio between the local stress and local strength distribution. The FSI simulations followed a clear trend of increasing wall stresses from normal to pathological cases. The maximal stresses were observed in the areas where the ILT was not present, indicating a potential protective effect of the ILT. Statistically significant differences were observed between the peak systolic stress and the peak stress at the mean arterial pressure between the three groups. For the ruptured aneurysms, where the geometry of intact aneurysm was reconstructed, results of the FSI simulations clearly depicted maximum wall stress at the a priori known location of rupture. The RPI mapping indicated several distinct regions of high RPI coinciding with the actual location of rupture. The FSI methodology demonstrates that the aneurysmal disease can be described by numerical simulations, as indicated by a clear trend of increasing aortic wall stresses in the studied groups, (normal aortas, AAAs and rAAAs). Ultimately, the results demonstrate that FSI wall stress mapping and RPI can be used as a tool for predicting the potential rupture of an AAA by predicting the actual rupture location, complementing current clinical practice by offering a predictive diagnostic tool for deciding whether to intervene surgically or spare the patient from an unnecessary risky operation.

Site-specific intravascular ultrasound analysis of remodelling index and calcified necrosis patterns reveals novel blueprints for coronary plaque instability

AIMS

Post-mortem pathological studies have shown that a "vulnerable" plaque is the dominant patho-physiological mechanism responsible for acute coronary syndromes (ACS). One way to improve our understanding of these plaques in vivo is by using histological "surrogates" created by intravascular ultrasound derived virtual histology (IVUS-VH). Our aim in this analysis was to determine the relationship between site-specific differences in individual plaque areas between ACS plaques and stable plaques (SP), with a focus on remodelling index and the pattern of calcifying necrosis.

METHODS AND RESULTS

IVUS-VH was performed before percutaneous intervention in both ACS culprit plaques (CP) n=70 and stable disease (SP) n=35. A total of 210 plaque sites were examined in 105 lesions at the minimum lumen area (MLA) and the maximum necrotic core site (MAX NC). Each plaque site had multiple measurements made including some novel calculations to ascertain the plaque calcification equipoise (PCE) and the calcified interface area (CIA). CP has greater amounts of positive remodelling at the MLA (RI@MLA): 1.1 (±0.17) vs. 0.95 (±0.14) (P<0.001); lower values for PCE 30% vs. 54% (P<0.001) but a higher CIA 5.38 (±2.72) vs. 3.58 (±2.26) (P=0.001). These features can provide discriminatory ability between plaque types with area under the curve (AUC) measurements between 0.65-0.86. The cut-off values with greatest sensitivity and specificity to discriminate CP morphologies were: RI @ MLA >1.12; RI @ MAX NC >1.22; PCE @ MLA <47.1%; PCE @MAX NC <47.3%; CIA @ MLA >2.6; CIA @ MAX NC >3.1.

CONCLUSIONS

Determining the stage of calcifying necrosis, along with the remodelling index can discriminate between stable and ACS related plaques. These findings could be applied in the future to help detect plaques that have a vulnerable phenotype.

Multiscale Particle-Based Modeling of Flowing Platelets in Blood Plasma Using Dissipative Particle Dynamics and Coarse Grained Molecular Dynamics

We developed a multiscale particle-based model of platelets, to study the transport dynamics of shear stresses between the surrounding fluid and the platelet membrane. This model facilitates a more accurate prediction of the activation potential of platelets by viscous shear stresses - one of the major mechanisms leading to thrombus formation in cardiovascular diseases and in prosthetic cardiovascular devices. The interface of the model couples coarse-grained molecular dynamics (CGMD) with dissipative particle dynamics (DPD). The CGMD handles individual platelets while the DPD models the macroscopic transport of blood plasma in vessels. A hybrid force field is formulated for establishing a functional interface between the platelet membrane and the surrounding fluid, in which the microstructural changes of platelets may respond to the extracellular viscous shear stresses transferred to them. The interaction between the two systems preserves dynamic properties of the flowing platelets, such as the flipping motion. Using this multiscale particle-based approach, we have further studied the effects of the platelet elastic modulus by comparing the action of the flow-induced shear stresses on rigid and deformable platelet models. The results indicate that neglecting the platelet deformability may overestimate the stress on the platelet membrane, which in turn may lead to erroneous predictions of the platelet activation under viscous shear flow conditions. This particle-based fluid-structure interaction multiscale model offers for the first time a computationally feasible approach for simulating deformable platelets interacting with viscous blood flow, aimed at predicting flow induced platelet activation by using a highly resolved mapping of the stress distribution on the platelet membrane under dynamic flow conditions.

Haemodynamical stress in mouse aortic arch with atherosclerotic plaques: Preliminary study of plaque progression

Atherosclerotic plaques develop at particular sites in the arterial tree, and this regional localisation depends largely on haemodynamic parameters (such as wall shear stress; WSS) as described in the literature. Plaque rupture can result in heart attack or stroke and hence understanding the development and vulnerability of atherosclerotic plaques is critically important. The purpose of this study is to characterise the haemodynamics of blood flow in the mouse aortic arch using numerical modelling. The geometries are digitalised from synchrotron imaging and realistic pulsatile blood flow is considered under rigid wall assumptions. Two cases are considered; arteries with and without plaque. Mice that are fed under fat diet present plaques in the aortic arch whose size is dependent on the number of weeks under the diet. The plaque distribution in the region is however relatively constant through the different samples. This result underlines the influence of the geometry and consequently of the wall shear stresses for plaque formation with plaques growing in region of relative low shear stresses. A discussion of the flow field in real geometry in the presence and absence of plaques is conducted. The presence of plaques was shown to alter the blood flow and hence WSS distribution, with regions of localised high WSS, mainly on the wall of the brachiocephalic artery where luminal narrowing is most pronounced. In addition, arch plaques are shown to induce recirculation in the blood flow, a phenomenon with potential influence on the progression of the plaques. The oscillatory shear index and the relative residence time have been calculated on the geometry with plaques to show the presence of this recirculation in the arch, an approach that may be useful for future studies on plaque progression.

Procoagulant activity of circulating microparticles is associated with the presence of moderate calcified plaque burden detected by multislice computed tomography

BACKGROUND

Circulating microparticles (MPs) have been reported to be associated with coronary artery disease (CAD). In this study, we explored the relationship between MPs procoagulant activity and characteristics of atherosclerotic plaque detected by 64-slice computed tomography angiography (CTA).

METHODS

In 127 consecutive patients with CAD but without acute coronary syndrome and who underwent 64-slice CTA, MPs procoagulant activity in plasma (by a thrombin generation test), soluble form of lectin-like oxidized low-density lipoprotein receptor-1 (sLOX-1) and N(epsilon)-(carboxymethyl) lysine (CML) circulating levels (by ELISA) were measured. A quantitative volumetric analysis of the lumen and plaque burden of the vessel wall (soft and calcific components), for the three major coronary vessels, was performed. The patients were classified in three groups according to the presence of calcium volume: non-calcified plaque (NCP) group (calcium volume (%) = 0), moderate calcified plaque (MCP) group (0 < calcium volume (%) < 1), and calcified plaque (CP) group (calcium volume (%) ≥ 1).

RESULTS

MPs procoagulant activity and CML levels were higher in MCP group than in CP or NCP group (P = 0.009 and P = 0.027, respectively). MPs procoagulant activity was positively associated with CML (r = 0.317, P < 0.0001) and sLOX-1 levels (r = 0.216, P = 0.0025).

CONCLUSIONS

MPs procoagulant activity was higher in the MCP patient group and correlated positively with sLOX-1 and CML levels, suggesting that it may characterize a state of blood vulnerability that may locally precipitate plaque instability and increase the risk of subsequent major cardiovascular events.

The influence of computational strategy on prediction of mechanical stress in carotid atherosclerotic plaques: comparison of 2D structure-only, 3D structure-only, one-way and fully coupled fluid-structure interaction analyses

BACKGROUND

Compositional and morphological features of carotid atherosclerotic plaques provide complementary information to luminal stenosis in predicting clinical presentations. However, they alone cannot predict cerebrovascular risk. Mechanical stress within the plaque induced by cyclical changes in blood pressure has potential to assess plaque vulnerability. Various modeling strategies have been employed to predict stress, including 2D and 3D structure-only, 3D one-way and fully coupled fluid-structure interaction (FSI) simulations. However, differences in stress predictions using different strategies have not been assessed.

METHODS

Maximum principal stress (Stress-P1) within 8 human carotid atherosclerotic plaques was calculated based on geometry reconstructed from in vivo computerized tomography and high resolution, multi-sequence magnetic resonance images. Stress-P1 within the diseased region predicted by 2D and 3D structure-only, and 3D one-way FSI simulations were compared to 3D fully coupled FSI analysis.

RESULTS

Compared to 3D fully coupled FSI, 2D structure-only simulation significantly overestimated stress level (94.1 kPa [65.2, 117.3] vs. 85.5 kPa [64.4, 113.6]; median [inter-quartile range], p=0.0004). However, when slices around the bifurcation region were excluded, stresses predicted by 2D structure-only simulations showed a good correlation (R(2)=0.69) with values obtained from 3D fully coupled FSI analysis. 3D structure-only model produced a small yet statistically significant stress overestimation compared to 3D fully coupled FSI (86.8 kPa [66.3, 115.8] vs. 85.5 kPa [64.4, 113.6]; p<0.0001). In contrast, one-way FSI underestimated stress compared to 3D fully coupled FSI (78.8 kPa [61.1, 100.4] vs. 85.5 kPa [64.4, 113.7]; p<0.0001).

CONCLUSIONS

A 3D structure-only model seems to be a computationally inexpensive yet reasonably accurate approximation for stress within carotid atherosclerotic plaques with mild to moderate luminal stenosis as compared to fully coupled FSI analysis.

How does calcification influence plaque vulnerability? Insights from fatigue analysis

Background. Calcification is commonly believed to be associated with cardiovascular disease burden. But whether or not the calcifications have a negative effect on plaque vulnerability is still under debate. Methods and Results. Fatigue rupture analysis and the fatigue life were used to evaluate the rupture risk. An idealized baseline model containing no calcification was first built. Based on the baseline model, we investigated the influence of calcification on rupture path and fatigue life by adding a circular calcification and changing its location within the fibrous cap area. Results show that 84.0% of calcified cases increase the fatigue life up to 11.4%. For rupture paths 10D far from the calcification, the life change is negligible. Calcifications close to lumen increase more fatigue life than those close to the lipid pool. Also, calcifications in the middle area of fibrous cap increase more fatigue life than those in the shoulder area. Conclusion. Calcifications may play a positive role in the plaque stability. The influence of the calcification only exists in a local area. Calcifications close to lumen may be influenced more than those close to lipid pool. And calcifications in the middle area of fibrous cap are seemly influenced more than those in the shoulder area.

Quantifying effect of intraplaque hemorrhage on critical plaque wall stress in human atherosclerotic plaques using three-dimensional fluid-structure interaction models

Recent magnetic resonance studies have indicated that intraplaque hemorrhage (IPH) may accelerate plaque progression and play an important role in plaque destabilization. However, the impact of hemorrhage on critical plaque wall stress (CPWS) and strain (CPWSn) has yet to be determined. The objective of this study was to assess the effect of the presence and size of IPH on wall mechanics. The magnetic resonance image (MRI) of one patient with histology-confirmed IPH was used to build eight 3D fluid-structure interaction (FSI) models by altering the dimensions of the existing IPH. As a secondary end point, the combined effect of IPH and fibrous cap thickness (FCT) was assessed. A volume curve fitting method (VCFM) was applied to generate a mesh that would guarantee numerical convergence. Plaque wall stress (PWS), strain (PWSn), and flow shear stress (FSS) were extracted from all nodal points on the lumen surface for analysis. Keeping other conditions unchanged, the presence of intraplaque hemorrhage caused a significant increase (27.5%) in CPWS; reduced FCT caused an increase of 22.6% of CPWS. Similar results were found for CPWSn. Furthermore, combination of IPH presence, reduced FCT, and increased IPH volume caused an 85% and 75% increase in CPWS and CPWSn, respectively. These results show that intraplaque hemorrhage has considerable impact on plaque stress and strain conditions and accurate quantification of IPH could lead to more accurate assessment of plaque vulnerability. Large-scale studies are needed to further validate our findings.

Computational approaches for analyzing the mechanics of atherosclerotic plaques: a review

Vulnerable and stable atherosclerotic plaques are heterogeneous living materials with peculiar mechanical behaviors depending on geometry, composition, loading and boundary conditions. Computational approaches have the potential to characterize the three-dimensional stress/strain distributions in patient-specific diseased arteries of different types and sclerotic morphologies and to estimate the risk of plaque rupture which is the main trigger of acute cardiovascular events. This review article attempts to summarize a few finite element (FE) studies for different vessel types, and how these studies were performed focusing on the used stress measure, inclusion of residual stress, used imaging modality and material model. In addition to histology the most used imaging modalities are described, the most common nonlinear material models and the limited number of models for plaque rupture used for such studies are provided in more detail. A critical discussion on stress measures and threshold stress values for plaque rupture used within the FE studies emphasizes the need to develop a more location and tissue-specific threshold value, and a more appropriate failure criterion. With this addition future FE studies should also consider more advanced strain-energy functions which then fit better to location and tissue-specific experimental data.

Uniaxial tensile testing approaches for characterisation of atherosclerotic plaques

The pathological changes associated with the development of atherosclerotic plaques within arterial vessels result in significant alterations to the mechanical properties of the diseased arterial wall. There are several methods available to characterise the mechanical behaviour of atherosclerotic plaque tissue, and it is the aim of this paper to review the use of uniaxial mechanical testing. In the case of atherosclerotic plaques, there are nine studies that employ uniaxial testing to characterise mechanical behaviour. A primary concern regarding this limited cohort of published studies is the wide range of testing techniques that are employed. These differing techniques have resulted in a large variance in the reported data making comparison of the mechanical behaviour of plaques from different vasculatures, and even the same vasculature, difficult and sometimes impossible. In order to address this issue, this paper proposes a more standardised protocol for uniaxial testing of diseased arterial tissue that allows for better comparisons and firmer conclusions to be drawn between studies. To develop such a protocol, this paper reviews the acquisition and storage of the tissue, the testing approaches, the post-processing techniques and the stress-strain measures employed by each of the nine studies. Future trends are also outlined to establish the role that uniaxial testing can play in the future of arterial plaque mechanical characterisation.

Image-based modeling for better understanding and assessment of atherosclerotic plaque progression and vulnerability: data, modeling, validation, uncertainty and predictions

Medical imaging and image-based modeling have made considerable progress in recent years in identifying atherosclerotic plaque morphological and mechanical risk factors which may be used in developing improved patient screening strategies. However, a clear understanding is needed about what we have achieved and what is really needed to translate research to actual clinical practices and bring benefits to public health. Lack of in vivo data and clinical events to serve as gold standard to validate model predictions is a severe limitation. While this perspective paper provides a review of the key steps and findings of our group in image-based models for human carotid and coronary plaques and a limited review of related work by other groups, we also focus on grand challenges and uncertainties facing the researchers in the field to develop more accurate and predictive patient screening tools.

Plaque hemorrhage in carotid artery disease: pathogenesis, clinical and biomechanical considerations

Stroke remains the most prevalent disabling illness today, with internal carotid artery luminal stenosis due to atheroma formation responsible for the majority of ischemic cerebrovascular events. Severity of luminal stenosis continues to dictate both patient risk stratification and the likelihood of surgical intervention. But there is growing evidence to suggest that plaque morphology may help improve pre-existing risk stratification criteria. Plaque components such a fibrous tissue, lipid rich necrotic core and calcium have been well investigated but plaque hemorrhage (PH) has been somewhat overlooked. In this review we discuss the pathogenesis of PH, its role in dictating plaque vulnerability, PH imaging techniques, marterial properties of atherosclerotic tissues, in particular, those obtained based on in vivo measurements and effect of PH in modulating local biomechanics.

Higher critical plaque wall stress in patients who died of coronary artery disease compared with those who died of other causes: a 3D FSI study based on ex vivo MRI of coronary plaques

Mechanical forces play an important role in the rupture of vulnerable plaques. This process is often associated with cardiovascular syndromes, such as heart attack and stroke. In this study, magnetic resonance imaging (MRI)-based models were used to investigate the association between plaque wall stress (PWS) and coronary artery disease (CAD). Ex vivo MRI data of coronary plaques from 12 patients were used to construct 12 three-dimensional (3D) fluid-structure interaction (FSI) computational models. Six of the patients had died from CAD and six had died from non-CAD causes. PWS was assessed using all nodal points on the lumen surface of each plaque. The maximum PWS from all possible vulnerable sites of each plaque was defined as the 3D critical plaque wall stress (CPWS). Mean 3D CPWS in the CAD group was 94.3% higher than that in the non-CAD group (265.6 vs. 136.7 kPa, P=0.0029). There was no statistically significant difference in global maximum plaque wall stress (GMPWS) between the two groups (P=0.347). There was also no statistically significant difference in plaque burden between the CAD group (84.4±5%) and the non-CAD group (82.0±8%, P=0.552). The results indicate that plaques from patients who died from CAD were associated with higher CPWS compared with those from patients who died from non-CAD causes. With further validation, analysis of CPWS may prove to be an important component in assessment of plaque vulnerability.

3D reconstruction techniques of human coronary bifurcations for shear stress computations

BACKGROUND

Heterogeneity in plaque composition in human coronary artery bifurcations is associated with blood flow induced shear stress. Shear stress is generally determined by combing 3D lumen data and computational fluid dynamics (CFD). We investigated two new procedures to generate 3D lumen reconstructions of coronary artery bifurcations for shear stress computations.

METHODS

We imaged 10 patients with multislice computer tomography (MSCT) and intravascular ultrasound (IVUS). The 3D reconstruction of the main branch was based on the fusion of MSCT and IVUS. The proximal part of side branch was reconstructed using IVUS data or MSCT data, resulting in two different reconstructions of the bifurcation region. The distal part of the side branch was based on MSCT data alone. The reconstructed lumen was combined with CFD to determine the shear stress. Low and high shear stress regions were defined and shear stress patterns in the bifurcation regions were investigated.

RESULTS

The 3D coronary bifurcations were successfully generated with both reconstruction procedures. The geometrical features of the bifurcation region for the two reconstruction procedures did not reveal appreciable differences. The shear stress maps showed a qualitative agreement, and the low and high shear stress regions were similar in size and average shear stress values were identical. The low and high shear stress regions showed an overlap of approximately 75%.

CONCLUSION

Reconstruction of the side branch with MSCT data alone is an adequate technique to study shear stress and wall thickness in the bifurcation region. The reconstruction procedure can be applied to further investigate the effect of shear stress on atherosclerosis in coronary bifurcations.

Changing views of the biomechanics of vulnerable plaque rupture: a review

This review examines changing perspectives on the biomechanics of vulnerable plaque rupture over the past 25 years from the first finite element analyses (FEA) showing that the presence of a lipid pool significantly increases the local tissue stress in the atheroma cap to the latest imaging and 3D FEA studies revealing numerous microcalcifications in the cap proper and a new paradigm for cap rupture. The first part of the review summarizes studies describing the role of the fibrous cap thickness, tissue properties, and lesion geometry as main determinants of the risk of rupture. Advantages and limitations of current imaging technologies for assessment of vulnerable plaques are also discussed. However, the basic paradoxes as to why ruptures frequently did not coincide with location of PCS and why caps >65 μm thickness could rupture at tissue stresses significantly below the 300 kPa critical threshold still remained unresolved. The second part of the review describes recent studies in the role of microcalcifications, their origin, shape, and clustering in explaining these unresolved issues including the actual mechanism of rupture due to the explosive growth of tiny voids (cavitation) in local regions of high stress concentration between closely spaced microinclusions oriented along their tensile axis.

Altered phenotypic gene expression of 10T1/2 mesenchymal cells in nonuniformly stretched PEGDA hydrogels

Disease-related phenotype modulation of many cell types has been shown to be closely related to mechanical loading conditions; for example, vascular smooth muscle cell (SMC) phenotype shift from a mature, contractile state to a proliferative, synthetic state contributes to the formation of neointimal tissue during atherosclerosis and restenosis development and is related to SMC mechanical loading in vivo. The majority of past in vitro cell-stretching experiments have employed simplistic (uniform, uniaxial or biaxial) stretching environments to elucidate mechanobiological pathways involved in phenotypic shifts. However, the in vivo mechanics of the vascular wall consists of highly nonuniform stretch. Here we subjected 10T1/2 murine mesenchymal cells (an SMC precursor) to two- and three-dimensional nonuniform stretch environments. After 24 h of stretch, cells on an elastomeric membrane demonstrated varied proliferation [assessed by 5-bromo-2'-deoxyuridine (BrdU) incorporation] depending on location upon the membrane, with maximal proliferation occurring in a region of high, uniaxial stretch. Cells subjected to a nonuniform stretching regimen within three-dimensional polyethylene glycol diacrylate (PEGDA) hydrogel constructs demonstrated marked changes in mRNA expression of several phenotype-related proteins, indicating a sort of "hybrid" phenotype with contractile and synthetic markers being both upregulated and downregulated. Furthermore, expression levels of mRNAs were significantly different between various locations within the stretched gel. With the proliferation results, these data exhibit the capability of nonuniform stretching devices to induce heterogeneous cell responses, potentially indicative of spatial distributions of disease-related behaviors in vivo.

Does microcalcification increase the risk of rupture?

Rupture of atherosclerotic plaque, which is related to maximal stress conditions in the plaque among others, is a major cause of mortality. More careful examination of stress distributions in atherosclerotic plaques reports that it could be due to local stress behaviors at critical sites caused by cap thinning, inflammation, macroscopic heterogeneity, and recently, the presence of microcalcifications. However, the role of microcalcifications is not yet fully understood, and most finite element models of blood vessels with atheroma plaque ignore the heterogeneity of the plaque constituents at the microscale. The goal of this work is to investigate the effect of microcalcifications on the stress field of an atheroma plaque vessel section. This is achieved by performing a parametric finite element study, assuming a plane strain hypothesis, of a coronary artery section with eccentric atheroma plaque and one microcalcification incorporated. The geometrical parameters used to define and design the idealized coronary plaque anatomy and the microcalcification were the fibrous cap thickness and the microcalcification ratio, angle and eccentricity. We could conclude that microcalcifications should be considered in the modeling of this kind of problems since they cause a significant alteration of the vulnerable risk by increasing the maximum maximal principal stress up to 32%, although this increase of stress is not uniform (12% on average). The obtained results show that the fibrous cap thickness, the microcalcification ratio and the microcalcification eccentricity, in combination with the microcalcification angle, appear to be the key morphological parameters that play a determinant role in the maximal principal stress and accordingly in the rupture risk of the plaque.

Coronary plaque characteristics that indicate distal embolization during percutaneous coronary intervention in patients with stable angina-virtual histology intravascular ultrasound study

Distal embolization (DE) is a serious complication of percutaneous coronary intervention (PCI) in patients with stable angina. The purpose of this study was to evaluate the coronary plaque characteristics that indicate DE during PCI in patients with stable angina using virtual histology intravascular ultrasound (VH-IVUS). Three hundred and sixty-four consecutive stable angina patients who underwent PCI were enrolled in this study. The patients were divided into two groups as follows: patients exhibiting DE (DE group, n = 10) and patients without DE (non-DE group, n = 354). Coronary plaque compositions were assessed by VH-IVUS. The fibro-fatty (FF) ratio (28 ± 17 vs. 11 ± 9 %, p < 0.0001) was higher in the DE group compared with the non-DE group. The best cut-off value of FF ratio for prediction of DE was 20 %, with a sensitivity of 0.80 and a specificity of 0.81 (odds ratio; 17.1, 95 % confidence interval 3.56-82.5, p = 0.0004). Coronary plaques with a high FF ratio may be the predictor of indicating DE in patients with stable angina during PCI.

Image-based modeling and precision medicine: patient-specific carotid and coronary plaque assessment and predictions

Atherosclerotic plaques may rupture without warning and cause acute cardiovascular events such as heart attack and stroke. Current clinical screening tools are insufficient to identify those patients with risks early and prevent the adverse events from happening. Medical imaging and image-based modeling have made considerable progress in recent years in identifying plaque morphological and mechanical risk factors which may be used in developing improved patient screening strategies. The key steps and factors in image-based models for human carotid and coronary plaques were illustrated, as well as grand challenges facing the researchers in the field to develop more accurate screening tools.

Using in vivo Cine and 3D multi-contrast MRI to determine human atherosclerotic carotid artery material properties and circumferential shrinkage rate and their impact on stress/strain predictions

In vivo magnetic resonance image (MRI)-based computational models have been introduced to calculate atherosclerotic plaque stress and strain conditions for possible rupture predictions. However, patient-specific vessel material properties are lacking in those models, which affects the accuracy of their stress/strain predictions. A noninvasive approach of combining in vivo Cine MRI, multicontrast 3D MRI, and computational modeling was introduced to quantify patient-specific carotid artery material properties and the circumferential shrinkage rate between vessel in vivo and zero-pressure geometries. In vivo Cine and 3D multicontrast MRI carotid plaque data were acquired from 12 patients after informed consent. For each patient, one nearly-circular slice and an iterative procedure were used to quantify parameter values in the modified Mooney-Rivlin model for the vessel and the vessel circumferential shrinkage rate. A sample artery slice with and without a lipid core and three material parameter sets representing stiff, median, and soft materials from our patient data were used to demonstrate the effect of material stiffness and circumferential shrinkage process on stress/strain predictions. Parameter values of the Mooney-Rivlin models for the 12 patients were quantified. The effective Young's modulus (YM, unit: kPa) values varied from 137 (soft), 431 (median), to 1435 (stiff), and corresponding circumferential shrinkages were 32%, 12.6%, and 6%, respectively. Using the sample slice without the lipid core, the maximum plaque stress values (unit: kPa) from the soft and median materials were 153.3 and 96.2, which are 67.7% and 5% higher than that (91.4) from the stiff material, while the maximum plaque strain values from the soft and median materials were 0.71 and 0.293, which are about 700% and 230% higher than that (0.089) from the stiff material, respectively. Without circumferential shrinkages, the maximum plaque stress values (unit: kPa) from the soft, median, and stiff models were inflated to 330.7, 159.2, and 103.6, which were 116%, 65%, and 13% higher than those from models with proper shrinkage. The effective Young's modulus from the 12 human carotid arteries studied varied from 137 kPa to 1435 kPa. The vessel circumferential shrinkage to the zero-pressure condition varied from 6% to 32%. The inclusion of proper shrinkage in models based on in vivo geometry is necessary to avoid over-estimating the stresses and strains by up 100%. Material stiffness had a greater impact on strain (up to 700%) than on stress (up to 70%) predictions. Accurate patient-specific material properties and circumferential shrinkage could considerably improve the accuracy of in vivo MRI-based computational stress/strain predictions.

A mechanistic analysis of the role of microcalcifications in atherosclerotic plaque stability: potential implications for plaque rupture

The role of microcalcifications (μCalcs) in the biomechanics of vulnerable plaque rupture is examined. Our laboratory previously proposed (Ref. 44), using a very limited tissue sample, that μCalcs embedded in the fibrous cap proper could significantly increase cap instability. This study has been greatly expanded. Ninety-two human coronary arteries containing 62 fibroatheroma were examined using high-resolution microcomputed tomography at 6.7-μm resolution and undecalcified histology with special emphasis on calcified particles <50 μm in diameter. Our results reveal the presence of thousands of μCalcs, the vast majority in lipid pools where they are not dangerous. However, 81 μCalcs were also observed in the fibrous caps of nine of the fibroatheroma. All 81 of these μCalcs were analyzed using three-dimensional finite-element analysis, and the results were used to develop important new clinical criteria for cap stability. These criteria include variation of the Young's modulus of the μCalc and surrounding tissue, μCalc size, and clustering. We found that local tissue stress could be increased fivefold when μCalcs were closely spaced, and the peak circumferential stress in the thinnest nonruptured cap (66 μm) if no μCalcs were present was only 107 kPa, far less than the proposed minimum rupture threshold of 300 kPa. These results and histology suggest that there are numerous μCalcs < 15 μm in the caps, not visible at 6.7-μm resolution, and that our failure to find any nonruptured caps between 30 and 66 μm is a strong indication that many of these caps contained μCalcs.

Effect of calcification on the mechanical stability of plaque based on a three-dimensional carotid bifurcation model

Background

This study characterizes the distribution and components of plaque structure by presenting a three-dimensional blood-vessel modelling with the aim of determining mechanical properties due to the effect of lipid core and calcification within a plaque. Numerical simulation has been used to answer how cap thickness and calcium distribution in lipids influence the biomechanical stress on the plaque.

Method

Modelling atherosclerotic plaque based on structural analysis confirms the rationale for plaque mechanical examination and the feasibility of our simulation model. Meaningful validation of predictions from modelled atherosclerotic plaque model typically requires examination of bona fide atherosclerotic lesions. To analyze a more accurate plaque rupture, fluid-structure interaction is applied to three-dimensional blood-vessel carotid bifurcation modelling. A patient-specific pressure variation is applied onto the plaque to influence its vulnerability.

Results

Modelling of the human atherosclerotic artery with varying degrees of lipid core elasticity, fibrous cap thickness and calcification gap, which is defined as the distance between the fibrous cap and calcification agglomerate, form the basis of our rupture analysis. Finite element analysis shows that the calcification gap should be conservatively smaller than its threshold to maintain plaque stability. The results add new mechanistic insights and methodologically sound data to investigate plaque rupture mechanics.

Conclusion

Structural analysis using a three-dimensional calcified model represents a more realistic simulation of late-stage atherosclerotic plaque. We also demonstrate that increases of calcium content that is coupled with a decrease in lipid core volume can stabilize plaque structurally.

Microcalcifications increase coronary vulnerable plaque rupture potential: a patient-based micro-CT fluid-structure interaction study

Asymptomatic vulnerable plaques (VP) in coronary arteries accounts for significant level of morbidity. Their main risk is associated with their rupture which may prompt fatal heart attacks and strokes. The role of microcalcifications (micro-Ca), embedded in the VP fibrous cap, in the plaque rupture mechanics has been recently established. However, their diminutive size offers a major challenge for studying the VP rupture biomechanics on a patient specific basis. In this study, a highly detailed model was reconstructed from a post-mortem coronary specimen of a patient with observed VP, using high resolution micro-CT which captured the microcalcifications embedded in the fibrous cap. Fluid-structure interaction (FSI) simulations were conducted in the reconstructed model to examine the combined effects of micro-Ca, flow phase lag and plaque material properties on plaque burden and vulnerability. This dynamic fibrous cap stress mapping elucidates the contribution of micro-Ca and flow phase lag VP vulnerability independently. Micro-Ca embedded in the fibrous cap produced increased stresses predicted by previously published analytical model, and corroborated our previous studies. The 'micro-CT to FSI' methodology may offer better diagnostic tools for clinicians, while reducing morbidity and mortality rates for patients with vulnerable plaques and ameliorating the ensuing healthcare costs.

Detection and Quantification of Molecular Calcification by PET/Computed Tomography: A New Paradigm in Assessing Atherosclerosis

Atherosclerotic plaque rupture is the leading cause of acute coronary syndrome. Molecular calcification represent as one of the early stages of plaque evolution has been hypothesized to play a potential role in atherosclerotic plaque instability and subsequent rupture. Several invasive and non-invasive structural imaging techniques have been utilized to diagnose atherosclerosis, but none of these methods are capable of detecting and quantifying molecular calcification. Fluorine-18-Sodium Fluoride (18F-NaF) positron emission tomography/computed tomography (PET/CT) imaging allows detection and quantification of arterial molecular calcification in heart and across multiple vessels. In this review the authors discuss the feasibility, application and potential future of 18F-NaF-PET/CT in detecting molecular calcification and in defining the future risk of atherosclerotic plaque rupture in the affected vessels.

Role of Global Disease Assessment by Combined PET-CT-MR Imaging in Examining Cardiovascular Disease

Atherosclerosis is considered a chronic inflammatory disease, and thereafter the degree of this pathologic process is considered to be a major determinant in plaque stability and in forecasting future events. Over the past decade, (18)F-fluorodeoxyglucose PET/computed tomography has become a well-established imaging modality in evaluating various inflammatory disorders, and has been shown to be very useful in evaluating plaque activity in major arteries. This emerging noninvasive imaging modality has great potential in evaluating plaque vulnerability and in predicting the risk of future rupture and consequent thrombosis.

In vivo serial MRI-based models and statistical methods to quantify sensitivity and specificity of mechanical predictors for carotid plaque rupture: location and beyond

It has been hypothesized that mechanical risk factors may be used to predict future atherosclerotic plaque rupture. Truly predictive methods for plaque rupture and methods to identify the best predictor(s) from all the candidates are lacking in the literature. A novel combination of computational and statistical models based on serial magnetic resonance imaging (MRI) was introduced to quantify sensitivity and specificity of mechanical predictors to identify the best candidate for plaque rupture site prediction. Serial in vivo MRI data of carotid plaque from one patient was acquired with follow-up scan showing ulceration. 3D computational fluid-structure interaction (FSI) models using both baseline and follow-up data were constructed and plaque wall stress (PWS) and strain (PWSn) and flow maximum shear stress (FSS) were extracted from all 600 matched nodal points (100 points per matched slice, baseline matching follow-up) on the lumen surface for analysis. Each of the 600 points was marked "ulcer" or "nonulcer" using follow-up scan. Predictive statistical models for each of the seven combinations of PWS, PWSn, and FSS were trained using the follow-up data and applied to the baseline data to assess their sensitivity and specificity using the 600 data points for ulcer predictions. Sensitivity of prediction is defined as the proportion of the true positive outcomes that are predicted to be positive. Specificity of prediction is defined as the proportion of the true negative outcomes that are correctly predicted to be negative. Using probability 0.3 as a threshold to infer ulcer occurrence at the prediction stage, the combination of PWS and PWSn provided the best predictive accuracy with (sensitivity, specificity) = (0.97, 0.958). Sensitivity and specificity given by PWS, PWSn, and FSS individually were (0.788, 0.968), (0.515, 0.968), and (0.758, 0.928), respectively. The proposed computational-statistical process provides a novel method and a framework to assess the sensitivity and specificity of various risk indicators and offers the potential to identify the optimized predictor for plaque rupture using serial MRI with follow-up scan showing ulceration as the gold standard for method validation. While serial MRI data with actual rupture are hard to acquire, this single-case study suggests that combination of multiple predictors may provide potential improvement to existing plaque assessment schemes. With large-scale patient studies, this predictive modeling process may provide more solid ground for rupture predictor selection strategies and methods for image-based plaque vulnerability assessment.

Numerical modeling of stress in stenotic arteries with microcalcifications: a parameter sensitivity study

As a follow-up to the work presented in Wenk et al. (2010, "Numerical Modeling of Stress in Stenotic Arteries With Microcalcifications: A Micromechanical Approximation," ASME J. Biomech. Eng., 132, p. 091011), a formal sensitivity study was conducted in which several model parameters were varied. The previous work only simulated a few combinations of the parameters. In the present study, the fibrous cap thickness, longitudinal position of the region of microcalcifications, and volume fraction of microcalcifications were varied over a broader range of values. The goal of the present work is to investigate the effects of localized regions of microcalcifications on the stress field of atherosclerotic plaque caps in a section of carotid artery. More specifically, the variations in the magnitude and location of the maximum circumferential stress were assessed for a range of parameters using a global sensitivity analysis method known as Sobol' indices. The stress was calculated by performing finite element simulations of three-dimensional fluid-structure interaction models, while the sensitivity indices were computed using a Monte Carlo scheme. The results indicate that cap thickness plays a significant role in the variation in the magnitude of the maximum circumferential stress, with the sensitivity to volume fraction increasing when the region of microcalcification is located at the shoulder. However, the volume fraction played a larger role in the variation in the location of the maximum circumferential stress. This matches the finding of the previous study (Wenk et al., 2010, "Numerical Modeling of Stress in Stenotic Arteries With Microcalcifications: A Micromechanical Approximation," ASME J. Biomech. Eng., 132, p. 091011), which indicates that the maximum circumferential stress always shifts to the region of microcalcification.

Effects of intima stiffness and plaque morphology on peak cap stress

BACKGROUND

Rupture of the cap of a vulnerable plaque present in a coronary vessel may cause myocardial infarction and death. Cap rupture occurs when the peak cap stress exceeds the cap strength. The mechanical stress within a cap depends on the plaque morphology and the material characteristics of the plaque components. A parametric study was conducted to assess the effect of intima stiffness and plaque morphology on peak cap stress.

METHODS

Models with idealized geometries based on histology images of human coronary arteries were generated by varying geometric plaque features. The constructed multi-layer models contained adventitia, media, intima, and necrotic core sections. For adventitia and media layers, anisotropic hyperelastic material models were used. For necrotic core and intima sections, isotropic hyperelastic material models were employed. Three different intima stiffness values were used to cover the wide range reported in literature. According to the intima stiffness, the models were classified as stiff, intermediate and soft intima models. Finite element method was used to compute peak cap stress.

RESULTS

The intima stiffness was an essential determinant of cap stresses. The computed peak cap stresses for the soft intima models were much lower than for stiff and intermediate intima models. Intima stiffness also affected the influence of morphological parameters on cap stresses. For the stiff and intermediate intima models, the cap thickness and necrotic core thickness were the most important determinants of cap stresses. The peak cap stress increased three-fold when the cap thickness was reduced from 0.25 mm to 0.05 mm for both stiff and intermediate intima models. Doubling the thickness of the necrotic core elevated the peak cap stress by 60% for the stiff intima models and by 90% for the intermediate intima models. Two-fold increase in the intima thickness behind the necrotic core reduced the peak cap stress by approximately 25% for both intima models. For the soft intima models, cap thickness was less critical and changed the peak cap stress by 55%. However, the necrotic core thickness was more influential and changed the peak cap stress by 100%. The necrotic core angle emerged as a critical determinant of cap stresses where a larger angle lowered the cap stresses. Contrary to the stiff and intermediate intima models, a thicker intima behind the necrotic core increased the peak cap stress by approximately 25% for the soft intima models. Adventitia thickness and local media regression had limited effects for all three intima models.

CONCLUSIONS

For the stiff and intermediate intima models, the cap thickness was the most important morphological risk factor. However for soft intima models, the necrotic core thickness and necrotic core angle had a bigger impact on the peak cap stress. We therefore need to enhance our knowledge of intima material properties if we want to derive critical morphological plaque features for risk evaluation.

Numerical modeling of stress in stenotic arteries with microcalcifications: a micromechanical approximation

Most finite element models of atherosclerotic arteries do not account for the heterogeneity of the plaque constituents at the microscale. Failure of plaque lesions has been shown to be a local event, linked to stress concentrations caused by cap thinning, inflammation, macroscopic heterogeneity, and recently, the presence of microcalcifications. There is growing evidence that microcalcifications exist in the fibrous cap of plaque lesions. However, their role is not yet fully understood. The goal of the present work is to investigate the effects of localized regions of microcalcifications on the stress field of atherosclerotic plaque caps in a section of carotid artery. This is achieved by performing finite element simulations of three-dimensional fluid-structure interaction models. The material response in the region of microcalcification is modeled using a combination of finite elements, homogenization theory, and a stress concentration function that approximates the average local stresses in the fibrous tissue and microcalcification phases. The results indicate that the circumferential stress in the fibrous tissue phase increases as the volume fraction of microcalcifications is increased, and that the stress exceeds a critical threshold when the fibrous cap thickness is decreased. Furthermore, the presence of the microcalcifications significantly influences the distribution of stress by shifting the maximum circumferential stress away from the cap shoulders, where failure is most common when the effective region of microcalcification is located at the center of the cap. This is a possible explanation of why 40% of plaque ruptures occur away from the shoulder region of the cap.

Intraplaque hemorrhage is associated with higher structural stresses in human atherosclerotic plaques: an in vivo MRI-based 3D fluid-structure interaction study

Background

Studies using medical images have shown that intraplaque hemorrhage may accelerate plaque progression and may produce a stimulus for atherosclerosis development by increasing lipid core and plaque volume and creating new destabilizing factors. Image-based 3D computational models with fluid-structure interactions (FSI) will be used to perform plaque mechanical analysis and investigate possible associations between intraplaque hemorrhage and both plaque wall stress (PWS) and flow shear stress (FSS).

Methods

In vivo MRI data of carotid plaques from 5 patients with intraplaque hemorrhage confirmed by histology were acquired. 3D multi-component FSI models were constructed for each plaque to obtain mechanical stresses. Plaque Wall Stress (PWS) and Flow Shear Stress (FSS) were extracted from all nodal points on the lumen surface of each plaque for analysis.

Results

The mean PWS value from all hemorrhage nodes of the 5 plaques combined was higher than that from non-hemorrhage nodes (75.6 versus 68.1 kPa, P = 0.0003). The mean PWS values from hemorrhage nodes for each of the 5 plaques were all significantly higher (5 out of 5) than those from non-hemorrhage nodes (P < 0.05). The mean FSS value from all hemorrhage nodes of the 5 plaques combined was 30.4% higher than that from all non-hemorrhage nodes (15.0 versus 11.5 dyn/cm², P = 0.0002). However, the mean flow shear stress values from individual cases showed mixed results: only one out of five plaques showed mean FSS value from hemorrhage nodes was higher than that from non-hemorrhage nodes; three out of five plaques showed that their mean FSS values from hemorrhage nodes were lower than those from non-hemorrhage nodes; and one plaque showed that the difference had no statistical significance.

Conclusion

The results of this study suggested that intraplaque hemorrhage nodes were associated with higher plaque wall stresses. Compared to flow shear stress, plaque wall stress has a better correlation with plaque component feature (hemorrhage) linked to plaque progression and vulnerability. With further validation, plaque stress analysis may provide additional stress indicators for image-based vulnerability assessment.

Detecting microcalcifications in atherosclerotic plaques by a simple trichromic staining method for epoxy embedded carotid endarterectomies

Atherosclerotic plaques have a high probability of undergoing rapid progression to stenosis, becoming responsible of acute coronary syndrome or stroke. Microcalcifications may act as enhancers of atherosclerotic plaque vulnerability. Considering that calcifications with a diameter smalller than 10 µm in paraffin embedded tissue are rather difficult to detect, our aim was to analyze microcalcifications on semithin sections from epoxy resin embedded samples of carotid endarterectomies using an original trichromic stain (methylene blue-azur B - basic fuchsine - alizarin red). We have compared samples stained either with our method, methylene blue-azur B alone or with Von Kossa staining, and methylene blue-azur B -basic fuchsine alone or with Von Kossa staining.

Our method resulted to be simple and fast (ca. 2 min), it gives a sharp general contrast for all structures and allows to easy identify collagen and elastin. In addition, gray-green colour associated to intracellular lipid droplets evidences foam cells, which are particularly abundant in endarterectomies samples. Mast cells and their metachromatic granules are also well recognized. Calcifications over 0,5 µm are clearly recognizable. In conclusion, microcalcifications are clearly distinguished from the extracellular matrix in spite of their reduced dimensions. Methylene blue-azur B-basic fuchsine-alizarin red method is easy to use, reproducible, and is particularly suitable for the identification of microcalcifications in the morphological analysis of atherosclerotic plaques.

Flow interactions with cells and tissues: cardiovascular flows and fluid-structure interactions. Sixth International Bio-Fluid Mechanics Symposium and Workshop, March 28-30, 2008, Pasadena, California

Interactions between flow and biological cells and tissues are intrinsic to the circulatory, respiratory, digestive and genitourinary systems. In the circulatory system, an understanding of the complex interaction between the arterial wall (a living multi-component organ with anisotropic, nonlinear material properties) and blood (a shear-thinning fluid with 45% by volume consisting of red blood cells, platelets, and white blood cells) is vital to our understanding of the physiology of the human circulation and the etiology and development of arterial diseases, and to the design and development of prosthetic implants and tissue-engineered substitutes. Similarly, an understanding of the complex dynamics of flow past native human heart valves and the effect of that flow on the valvular tissue is necessary to elucidate the etiology of valvular diseases and in the design and development of valve replacements. In this paper we address the influence of biomechanical factors on the arterial circulation. The first part presents our current understanding of the impact of blood flow on the arterial wall at the cellular level and the relationship between flow-induced stresses and the etiology of atherosclerosis. The second part describes recent advances in the application of fluid-structure interaction analysis to arterial flows and the dynamics of heart valves.