Z-scheme visible-light-driven Ag3PO4 nanoparticle@MoS2 quantum dot/few-layered MoS2 nanosheet heterostructures with high efficiency and stability for photocatalytic selective oxidation

Structure-Mediated Charge Separation in Boron Carbon Nitride for Enhanced Photocatalytic Oxidation of Alcohol

Boron carbon nitride (BCN) is a promising earth-abundant photocatalyst for solar energy conversion. However, the photocatalytic activities of BCN materials remain moderate because of the fast electron-hole recombination. Herein, an ordered BCN structure is fabricated by a facile one-step thermal treatment strategy. The ordered structure of BCN is directly evident from powder X-ray diffraction and high-resolution transmission electron microscopy. Importantly, it is found that the long-period ordered structure can intrinsically accelerate the separation and transfer kinetics of photogenerated charge carriers. Benefiting from these advantages, the ordered BCN structure exhibits remarkable performance for photoinduced selective oxidation of benzyl alcohol compared with the pristine BCN counterpart. This work highlights the important role of the crystal structure of light-harvesting materials in affecting electron-hole separation and at the same time points to the ample potential for improving the photocatalytic performance.

Antibiotic removal from water: A highly efficient silver phosphate-based Z-scheme photocatalytic system under natural solar light

Photocatalytic degradation is an alternative method to remove pharmaceutical compounds from water, however it is hard to achieve efficient rate because of the low efficiency of photocatalysts. In this study, an efficient Z-Scheme photocatalyst was constructed by integrating graphitic carbon nitride (CN) and reduced graphene oxide (rGO) with AP via a simple facile precipitation method. Excitedly, ternary AP/rGO/CN composite showed superior photocatalytic and anti-photocorrosion performances under both intense sunlight and weak indoor light irradiation. NOF can be completely degraded in only 30 min and about 85% of NOF can be mineralized after 2 h irradiation under intensive sunlight irradiation. rGO could work not only as a sheltering layer to protect AP from photocorrosion but also as a mediator for Z-Scheme electron transport, which can protect AP from the photoreduction. This strategy could be a promising method to construct photocatalytic system with high efficiency for the removal of antibiotics under natural light irradiation.

Anchoring Fe3O4 Nanoparticles on Carbon Nanotubes for Microwave-Induced Catalytic Degradation of Antibiotics

Microwave-induced catalytic degradation is considered amongst the most efficient techniques to remove antibiotic such as chlortetracycline from contaminated water. Described here is a new microwave-induced oxidation catalyst based on carbon nanotubes (CNTs) decorated uniformly with nanoparticles of Fe₃O₄. The combination of dielectric loss and magnetic loss of the material contributed to its stronger microwave absorption and the ability to produce more "hot spots". These hot spots promoted the oxidation of common antibiotics such as chlortetracycline, tetracycline, and oxytetracycline under microwave irradiation. Experiments with the addition of scavenger showed that hydroxy radicals (^•OH) together with superoxide radicals (^•O₂^-) contributed to the antibiotics removal as well. The final degradation products included CO₂ and NO₃^- as confirmed by mass spectroscopy and ion chromatography analyses. The results indicated that the Fe₃O₄/CNTs was an efficient catalyst for microwave-induced oxidation.

Insights Into Highly Improved Solar-Driven Photocatalytic Oxygen Evolution Over Integrated Ag3PO4/MoS2 Heterostructures

Oxygen evolution has been considered as the rate-determining step in photocatalytic water splitting due to its sluggish four-electron half-reaction rate, the development of oxygen-evolving photocatalysts with well-defined morphologies and superior interfacial contact is highly important for achieving high-performance solar water splitting. Herein, we report the fabrication of Ag₃PO₄/MoS₂ nanocomposites and, for the first time, their use in photocatalytic water splitting into oxygen under LED light illumination. Ag₃PO₄ nanoparticles were found to be anchored evenly on the surface of MoS₂ nanosheets, confirming an efficient hybridization of two semiconductor materials. A maximum oxygen-generating rate of 201.6 μmol · L⁻¹ · g⁻¹ · h⁻¹ was determined when 200 mg MoS₂ nanosheets were incorporated into Ag₃PO₄ nanoparticles, which is around 5 times higher than that of bulk Ag₃PO₄. Obvious enhancements in light-harvesting property, as well as electron-hole separation and charge transportation are revealed by the combination of different characterizations. ESR analysis verified that more active oxygen-containing radicals generate over illuminated Ag₃PO₄/MoS₂ composite photocatalysts rather than irradiated Ag₃PO₄. The improvement in oxygen evolution performance of Ag₃PO₄/MoS₂ composite photocatalysts is ascribed to wide spectra response in the visible-light region, more efficient charge separation, and enhanced oxidation capacity in the valence band (VB). This study provides new insights into the design and development of novel composite photocatalytic materials for solar-to-fuel conversion.

Enhanced visible-light photocatalytic activity and photostability of Ag3PO4/Bi2WO6 heterostructures toward organic pollutant degradation and plasmonic Z-scheme mechanism

Novel Ag3PO4/Bi2WO6 heterostructured materials with enhanced visible-light catalytic performance were successfully synthesized by assembly combined with a hydrothermal treatment. The microstructures, morphologies, and optical properties of the prepared samples were characterized by multiple techniques. The irregular Ag3PO4 nanospheres dispersed on the surface of Bi2WO6 nanoflakes, and their catalytic performances were evaluated via the degradation of organic pollutants including rhodamine B (RB), methylene blue (MB), crystal violet (CV), methyl orange (MO), and phenol (Phen) under visible-light irradiation. The resulting Ag3PO4/Bi2WO6 heterostructured materials displayed higher photocatalytic activity than that of either pure Bi2WO6 or Ag3PO4. The enhanced photocatalytic activity was due to the good formation of heterostructures, which could not only broaden the spectral response range to visible light but also effectively promoted the charge separation. Meanwhile, the reasonable photoreactive plasmonic Z-scheme mechanism was carefully investigated on the basic of the reactive species scavenging tests, photoelectrochemical experiments, and photoluminescence (PL) spectrum. In addition, the excellent photostability of Ag3PO4/Bi2WO6 was obtained, which Ag formed at the early photocatalytic reaction acted as the charge transmission-bridge to restrain the further photoreduction of Ag3PO4.

Synergetic Exfoliation and Lateral Size Engineering of MoS2 for Enhanced Photocatalytic Hydrogen Generation

Generally, exfoliation is an efficient strategy to create more edge site so as to expose more active sites on molybdenum disulphide (MoS₂ ). However, the lateral sizes of the resultant MoS₂ monolayers are relatively large (≈50-500 nm), which retain great potential to release more active sites. To further enhance the catalytic performance of MoS₂ , a facile cascade centrifugation-assisted liquid phase exfoliation method is introduced here to fabricate monolayer enriched MoS₂ nanosheets with nanoscale lateral sizes. The as-prepared MoS₂ revealed a high monolayer yield of 36% and small average lateral sizes ranging from 42 to 9 nm under gradient centrifugations, all exhibiting superior catalytic performances toward photocatalytic H₂ generation. Particularly, the optimized monolayer MoS₂ with an average lateral size of 9 nm achieves an apparent quantum efficiency as high as 77.2% on cadmium sulphide at 420 nm. This work demonstrates that the catalytic performances of MoS₂ could be dramatically enhanced by synergistic exfoliation and lateral size engineering as a result of increased density of active sites and shortened charge diffusion distance, paving a new way for design and fabrication of transition-metal dichalcogenides-based materials in the application of hydrogen generation.

Construction and mechanism of a highly efficient and stable Z-scheme Ag3PO4/reduced graphene oxide/Bi2MoO6 visible-light photocatalyst

A novel Ag₃PO₄/reduced graphene oxide/Bi₂MoO₆ (Ag₃PO₄/RGO/Bi₂MoO₆) Z-scheme photocatalyst has been successfully prepared by a precipitation-solvothermal method.

Near-infrared-driven Cr(vi) reduction in aqueous solution based on a MoS2/Sb2S3 photocatalyst

A novel MoS₂/Sb₂S₃ composite with enhanced near-infrared photocatalytic efficiency was fabricated.

Construction of highly efficient and stable ternary AgBr/Ag/PbBiO2Br Z-scheme photocatalyst under visible light irradiation: Performance and mechanism insight

In this work, the novel ternary AgBr/Ag/PbBiO₂Br Z-scheme photocatalysts were synthesized via a CTAB-assisted calcination process. The AgBr/Ag/PbBiO₂Br composites were employed for the degradation of rhodamine B (RhB) and antibiotic bisphenol A (BPA) under visible light irradiation. Results showed that the obtained AgBr/Ag-3/PbBiO₂Br displayed optimal photocatalytic performance, which could remove almost all RhB within 25 min and effectively decompose 82.3% of BPA in 120 min. Three-dimensional excitation-emission matrix fluorescence spectra (3D EEMs) were utilized for the purposes of fully grasping the behaviors of RhB molecules during the reaction process. Meanwhile, the effects of initial RhB concentration and co-existent electrolytes were investigated from the viewpoint of practical application. In addition, there was no obvious loss in degradation efficiency even after four cycles. The enhanced photocatalytic performances of AgBr/Ag/PbBiO₂Br could be credited to the accelerated interfacial charge transfer process and the improved separation of the photogenerated electron-hole pairs. The existence of a small amount of metallic Ag played a significant role in preventing AgBr from being further photocorroded, resulting in the formation of a stable Z-scheme photocatalyst system. This study demonstrated that using metallic Ag as an electron mediator to construct Z-scheme photocatalytic system provided a feasible strategy in promoting the stability of Ag-based semiconductors.

MoS2 quantum dot-modified Ag/polyaniline composites with enhanced photogenerated carrier separation for highly efficient visible light photocatalytic H2 evolution performance

Uniform heterostructured MoS₂ QDs–Ag/PANI composites are fabricated, which exhibit significantly enhanced photocatalytic activity for H₂ production under visible light irradiation.