3D Noble-Metal Nanostructures Approaching Atomic Efficiency and Atomic Density Limits

Noble metals have been widely used in catalysis, however, the scarcity and high cost of noble metal motivate researchers to balance the atomic efficiency and atomic density, which is formidably challenging. This article proposes a robust strategy for fabricating 3D amorphous noble metal-based oxides with simultaneous enhancement on atomic efficiency and density with the assistance of atomic channels, where the atomic utilization increases from 18.2% to 59.4%. The unique properties of amorphous bimetallic oxides and formation of atomic channels have been evidenced by detailed experimental characterizations and theoretical simulations. Moreover, the universality of the current strategy is validated by other binary oxides. When Cu2IrOx with atomic channels (Cu2IrOx-AE) is used as catalyst for oxygen evolution reaction (OER), the mass activity and turnover frequency value of Cu2IrOx-AE are 1-2 orders of magnitude higher than CuO/IrO2 and Cu2IrOx without atomic channels, largely outperforming the reported OER catalysts. Theoretical calculations reveal that the formation of atomic channels leads to various Ir sites, on which the proton of adsorbed *OH can transfer to adjacent O atoms of [IrO6]. This work may attract immediate interest of researchers in material science, chemistry, catalysis, and beyond.

Hierarchically Structured Graphene Aerogel Supported Nickel-Cobalt Oxide Nanowires as an Efficient Electrocatalyst for Oxygen Evolution Reaction

The rational design of a heterostructure electrocatalyst is an attractive strategy to produce hydrogen energy by electrochemical water splitting. Herein, we have constructed hierarchically structured architectures by immobilizing nickel-cobalt oxide nanowires on/beneath the surface of reduced graphene aerogels (NiCoO2/rGAs) through solvent-thermal and activation treatments. The morphological structure of NiCoO2/rGAs was characterized by microscopic analysis, and the porous structure not only accelerates the electrolyte ion diffusion but also prevents the agglomeration of NiCoO2 nanowires, which is favorable to expose the large surface area and active sites. As further confirmed by the spectroscopic analysis, the tuned surface chemical state can boost the catalytic active sites to show the improved oxygen evolution reaction performance in alkaline electrolytes. Due to the synergistic effect of morphology and composition effect, NiCoO2/rGAs show the overpotential of 258 mV at the current density of 10 mA cm-2. Meanwhile, the small values of the Tafel slope and charge transfer resistance imply that NiCoO2/rGAs own fast kinetic behavior during the OER test. The overlap of CV curves at the initial and 1001st cycles and almost no change in current density after the chronoamperometric (CA) test for 10 h confirm that NiCoO2/rGAs own exceptional catalytic stability in a 1 M KOH electrolyte. This work provides a promising way to fabricate the hierarchically structured nanomaterials as efficient electrocatalysts for hydrogen production.

Core-Shell CoS2@MoS2 with Hollow Heterostructure as an Efficient Electrocatalyst for Boosting Oxygen Evolution Reaction

It is imperative to develop an efficient catalyst to reduce the energy barrier of electrochemical water decomposition. In this study, a well-designed electrocatalyst featuring a core-shell structure was synthesized with cobalt sulfides as the core and molybdenum disulfide nanosheets as the shell. The core-shell structure can prevent the agglomeration of MoS2, expose more active sites, and facilitate electrolyte ion diffusion. A CoS2/MoS2 heterostructure is formed between CoS2 and MoS2 through the chemical interaction, and the surface chemistry is adjusted. Due to the morphological merits and the formation of the CoS2/MoS2 heterostructure, CoS2@MoS2 exhibits excellent electrocatalytic performance during the oxygen evolution reaction (OER) process in an alkaline electrolyte. To reach the current density of 10 mA cm-2, only 254 mV of overpotential is required for CoS2@MoS2, which is smaller than that of pristine CoS2 and MoS2. Meanwhile, the small Tafel slope (86.9 mV dec-1) and low charge transfer resistance (47 Ω) imply the fast dynamic mechanism of CoS2@MoS2. As further confirmed by cyclic voltammetry curves for 1000 cycles and the CA test for 10 h, CoS2@MoS2 shows exceptional catalytic stability. This work gives a guideline for constructing the core-shell heterostructure as an efficient catalyst for oxygen evolution reaction.

Enhanced Photocatalytic Oxygen Evolution Using Copper-Coordinated Perylene Diimide Nanorod Assemblies

A crystalline supramolecular photocatalyst is prepared through metal-induced self-assembly of perylene diimide with imidazole groups at the imide position (PDI-Hm). Exploiting the metal-coordination ability of imidazole, a crystalline assembly of copper-coordinated PDI-Hm (CuPDI-Hm) in a nanorod shape is prepared which displays an outstanding photocatalytic oxygen evolution rate of 25,900 μmol g-1 h-1 without additional co-catalysts. The imidazole-copper coordination, along with π-π stacking of PDI frameworks, guides the arrangement of PDI-Hm molecules to form highly crystalline assemblies. The coordination of copper also modulates the size of the CuPDI-Hm supramolecular assembly by regulating the nucleation and growth processes. Furthermore, the imidazole-copper coordination constructs the electric field within the PDI-Hm assembly, hindering the recombination of photo-induced charges to enhance the photoelectric/photocatalytic activity when compared to Cu-free PDI-Hm assemblies. Small CuPDI-Hm assembly exhibits higher photocatalytic activity due to their larger surface area and reduced light scattering. Together, the Cu-imidazole coordination presents a facile way for fabricating size-controlled crystalline PDI assemblies with built-in electric field enhancing photoelectric and photocatalytic activities substantially.

Donor-Acceptor Conjugated Acetylenic Polymers for High-Performance Bifunctional Photoelectrodes

Due to the drastic required thermodynamical requirements, a photoelectrode material that can function as both a photocathode and a photoanode remains elusive. In this work, we demonstrate for the first time that, under simulated solar light and without co-catalysts, donor-acceptor conjugated acetylenic polymers (CAPs) exhibit both impressive oxygen evolution (OER) and hydrogen evolution (HER) photocurrents in alkaline and neutral medium, respectively. In particular, poly(2,4,6-tris(4-ethynylphenyl)-1,3,5-triazine) (pTET) provides a benchmark OER photocurrent density of ~200 μA cm-2 at 1.23 V vs. reversible hydrogen electrode (RHE) at pH 13 and a remarkable HER photocurrent density of ~190 μA cm-2 at 0.3 V vs. RHE at pH 6.8. By combining theoretical investigations and electrochemical-operando Resonance Raman spectroscopy, we show that the OER proceeds with two different mechanisms, with the electron-depleted triple bonds acting as single-site OER in combination with the C4-C5 atoms of the phenyl rings as dual sites. The HER, instead, occurs via an electron transfer from the tri-acetylenic linkages to the triazine rings, which act as the HER active sites. This work represents a novel application of organic-based materials and contributes to the development of high-performance photoelectrochemical catalysts for the solar fuels' generation.

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Designing cost-efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal-air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe-based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec-1, achieved at a current density of 10 mA cm- 2. Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Self-etching assembly of designed NiFeMOF nanosheet arrays as high-efficient oxygen evolution electrocatalyst for water splitting

2D metal-organic frameworks (MOFs) have emerged as potential candidates for electrocatalytic oxygen evolution reactions (OER) due to their inherent properties like abundant coordination unsaturated active sites and efficient charge transfer. Herein, a versatile and massively synthesizable self-etching assembly strategy wherein nickel-iron foam (NFF) acts as a substrate and a metal ion source. Specifically, by etching the nickel-iron foam (NFF) surface using ligands and solvents, Ni/Fe metal ions are activated and subsequently reacted under hydrothermal conditions, resulting in the formation of self-supporting nanosheet arrays, eliminating the need for external metal salts. The obtained 33 % NiFeMOF/NFF exhibits remarkable OER performance with ultra-low overpotentials of 188/231 mV at 10/100 mA cm-2 , respectively, outperforming most recently reported catalysts. Besides, the built 33 % NiFeMOF/NFF(+) ||Pt/C(-) electrolyzer presents low cell voltages of 1.55/1.83 V at 10/100 mA cm-2 , superior to the benchmark RuO2 (+) ||Pt/C(-) , implying good industrialization prospects. The excellent catalytic activity stems from the modulation of the electronic spin state of the Ni active site by the introduction of Fe, which facilitates the adsorption process of oxygen-containing intermediates and thus enhances the OER activity. This innovative approach offers a promising pathway for commercial-scale sustainable energy solutions.

Efficient Solar-Driven Water Splitting Enabled by Perovskite Photovoltaics and a Halogen-Modulated Metal-Organic Framework Electrocatalyst

Solar-driven water splitting powered by photovoltaics enables efficient storage of solar energy in the form of hydrogen fuel. In this work, we demonstrate efficient solar-to-hydrogen conversion using perovskite (PVK) tandem photovoltaics and a halogen-modulated metal-organic framework (MOF) electrocatalyst. By substituting tetrafluoroterephthalate (TFBDC) for terephthalic (BDC) ligands in a nickel-based MOF, we achieve a 152 mV improvement in oxygen evolution reaction (OER) overpotential at 10 mA·cm2. Through X-ray photoelectron spectroscopy (XPS), X-ray adsorption structure (XAS) analysis, theoretical simulation, and electrochemical results, we demonstrated that the introduction of fluorine atoms enhanced the intrinsic activity of Ni sites as well as the transfer property and accessibility of the MOF. Using this electrocatalyst in a bias-free photovoltaic electrochemical (PV-EC) system with a PVK/organic tandem solar cell, we achieve 6.75% solar-to-hydrogen efficiency (ηSTH). We also paired the electrocatalyst with a PVK photovoltaic module to drive water splitting at 206.7 mA with ηSTH of 10.17%.

The Secret of Nanoarrays toward Efficient Electrochemical Water Splitting: A Vision of Self-Dynamic Electrolyte

Nanoarray electrocatalysts with unique advantage of facilitating gas bubble detachment have garnered significant interest in gas evolution reactions (GERs). Existing research is largely based on a static hypothesis, assuming that buoyancy is the only driving force for the release of bubbles during GERs. However, this hypothesis overlooks the effect of the self-dynamic electrolyte flow, which is induced by the release of mature bubbles and helps destabilize and release the smaller, immature bubbles nearby. Herein, the enhancing effect of self-dynamic electrolyte flow on nanoarray structures is examined. Phase-field simulations demonstrate that the flow field of electrode with arrayed surface focuses shear force directly onto the gas bubble for efficient detachment, due to the flow could pass through voids and channels to bypass the shielding effect. The flow field therefore has a more substantial impact on the arrayed surface than the nanoscale smooth surface in terms of reducing the critical bubble size. To validate this, superaerophobic ferrous-nickel sulfide nanoarrays are fabricated and employed for water splitting, which display improved efficiency for GERs. This study contributes to understanding the influence of self-dynamic electrolyte on GERs and emphasizes that it should be considered when designing and evaluating nanoarray electrocatalysts.

Phosphorus-Modulated Generation of Defective Molybdenum Sites as Synergistic Active Centers for Durable Oxygen Evolution

It is well known that electrocatalytic oxygen evolution reaction (OER) activities primarily depend on the active centers of electrocatalysts. In some oxide electrocatalysts, high-valence metal sites (e.g., molybdenum oxide) are generally not the real active centers for electrocatalytic reactions, which is largely due to their undesired intermediate adsorption behaviors. As a proof-of-concept, molybdenum oxide catalysts are selected as a representative model, in which the intrinsic molybdenum sites are not the favorable active sites. Via phosphorus-modulated defective engineering, the inactive molybdenum sites can be regenerated as synergistic active centers for promoting OER. By virtue of comprehensive comparison , it is revealed that the OER performance of oxide catalysts is highly associated with the phosphorus sites and the molybdenum/oxygen defects. Specifically, the optimal catalyst delivers an overpotential of 287 mV to achieve the current density of 10 mA cm-2 , accompanied by only 2% performance decay for continuous operation up to 50 h. It is expected that this work sheds light on the enrichment of metal active sites via activating inert metal sites on oxide catalysts for boosting electrocatalytic properties.

Oxygen evolution from extremophilic cyanobacteria confined in hard biocoatings

Biocoatings, in which viable bacteria are immobilized within a waterborne polymer coating for a wide range of potential applications, have garnered greater interest in recent years. In bioreactors, biocoatings can be ready-to-use alternatives for carbon capture or biofuel production that could be reused multiple times. Here, we have immobilized cyanobacteria in mechanically hard biocoatings, which were deposited from polymer colloids in water (i.e., latex). The biocoatings are formed upon heating to 37°C and fully dried before rehydrating. The viability and oxygen evolution of three cyanobacterial species within the biocoatings were compared. Synechococcus sp. PCC 7002 was non-viable inside the biocoatings immediately after drying, whereas Synechocystis sp. PCC 6803 survived the coating formation, as shown by an adenosine triphosphate (ATP) assay. Synechocystis sp. PCC 6803 consumed oxygen (by cell respiration) for up to 5 days, but was unable to perform photosynthesis, as indicated by a lack of oxygen evolution. However, Chroococcidiopsis cubana PCC 7433, a strain of desiccation-resistant extremophilic cyanobacteria, survived and performed photosynthesis and carbon capture within the biocoating, with specific rates of oxygen evolution up to 0.4 g of oxygen/g of biomass per day. Continuous measurements of dissolved oxygen were carried out over a month and showed no sign of decreasing activity. Extremophilic cyanobacteria are viable in a variety of environments, making them ideal candidates for use in biocoatings and other biotechnology. IMPORTANCE As water has become a precious resource, there is a growing need for less water-intensive use of microorganisms, while avoiding desiccation stress. Mechanically robust, ready-to-use biocoatings or "living paints" (a type of artificial biofilm consisting of a synthetic matrix containing functional bacteria) represent a novel way to address these issues. Here, we describe the revolutionary, first-ever use of an extremophilic cyanobacterium (Chroococcidiopsis cubana PCC 7433) in biocoatings, which were able to produce high levels of oxygen and carbon capture for at least 1 month despite complete desiccation and subsequent rehydration. Beyond culturing viable bacteria with reduced water resources, this pioneering use of extremophiles in biocoatings could be further developed for a variety of applications, including carbon capture, wastewater treatment and biofuel production.

Fe and Mo Co-Modulated Coral-like Nickel Pyrophosphate in situ Derived from Nickel-Foam for Oxygen Evolution

A highly active catalyst for the oxygen evolution reaction (OER) is critical to achieve high efficiency in hydrogen generation from water splitting. Direct conversion of nickel foam (NF) into nickel-based catalysts has attracted intensive interest due to the tight interaction of the catalysts to the substrate surface. However, the catalytic performances are still far below expectation because of the problems of low catalyst amount, thin catalyst layer, and small active area caused by the limitations of the synthesis method. Herein, we develop a Fe3+ -induced synthesis strategy to transform the NF surface into a thicker catalyst layer. In addition to the excellent conductivity and high stability, the as-prepared FeMo-Ni2 P2 O7 /NF catalysts expose more active sites and facilitate mass transfer due to their thicker catalyst layer and highly dense coral-like micro-nano structure. Furthermore, the Mo, Fe co-modulation optimizes the adsorption free energies of the OER intermediates, boosting catalytic activities. Its catalytic activity is among the highest, and it exhibits a small Tafel slope of 34.71 mV dec-1 and a low overpotential of 161 mV for delivering a current density of 100 mA cm-2 compared to reported Ni-based catalysts. The present strategy can be further used in the design of other catalysts for energy storage and conversion.

Investigation of Hydrogen and Oxygen Evolution on Cobalt-Nanoparticles-Supported Graphitic Carbon Nitride

This study focuses on fabricating cobalt particles deposited on graphitic carbon nitride (Co/gCN) using annealing, microwave-assisted and hydrothermal syntheses, and their employment in hydrogen and oxygen evolution (HER and OER) reactions. Composition, surface morphology, and structure were examined using inductively coupled plasma optical emission spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. The performance of Co-modified gCN composites for the HER and OER were investigated in an alkaline media (1 M KOH). Compared to the metal-free gCN, the modification of gCN with Co enhances the electrocatalytic activity towards the HER and OER. Additionally, thermal annealing of both Co(NO3)2 and melamine at 520 °C for 4 h results in the preparation of an effective bifunctional Co3O4/gCN catalyst for the HER with the lower Eonset of -0.24 V, a small overpotential of -294.1 mV at 10 mA cm-2, and a low Tafel slope of -29.6 mV dec-1 in a 1.0 M KOH solution and for the OER with the onset overpotential of 286.2 mV and overpotential of 422.3 mV to achieve a current density of 10 mA cm-2 with the Tafel slope of 72.8 mV dec-1.

An Ultrastable Bifunctional Electrocatalyst Derived from a Co2+-Anchored Covalent-Organic Framework for High-Efficiency ORR/OER and Rechargeable Zinc-Air Battery

It remains a great challenge to develop alternative electrocatalysts with high stability for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, a bifunctional electrocatalyst composed of hollow CoOx (Co3O4/CoO) nanoparticles embedded in lamellar carbon nanofibers is derived from a Co2+-anchored covalent-organic framework. The as-fabricated electrocatalyst (CoOx@NC-800) exhibits a half-wave potential (E1/2) of 0.89 V with ultrahigh long-term stability (100% current retention after 3000 CV cycles). Together with promising OER performance, the CoOx@NC-800 based reversible Zn-air battery displays a small potential gap (0.70 V), superior to that of the commercial 20% Pt/C + RuO2. The density functional theory (DFT) calculations reveal that the remarkable electrocatalytic performance and stability of CoOx@NC-800 are attributed to the optimized adsorption of the *OOH intermediate and reduced free energy of the potential-limiting step. This study establishes the functionalization of COF structure for fabrication of high-performance carbon-based electrocatalysts.

High-Entropy Layered Double Hydroxides with Highly Adjustable Components for Enhancing Electrocatalytic Oxygen Evolution

The main obstacle to the development of large-scale electrochemical hydrogen production based on water splitting is the slow four-electron kinetics of OER (oxygen evolution reaction). The most efficient method is to create sophisticated and effective OER catalysts. Here, we proposed the controlled synthesis of high-entropy layered double hydroxides (HELDH) for wide component regulation and the component design of high OER activity to make up for the restricted component regulation in conventional catalysts. Through the use of coprecipitation and hydrothermal synthesis, the representative sample (MgCoNi)3(FeAl)-LDH is created and systematically characterized. Significantly, this technique of preparation may generically synthesize a variety of HELDH with various component combinations, demonstrating the remarkable adaptability of the HELDH components. Subsequently, (FeCoNi)3(FeCr)-LDH with high OER activity is designed and synthesized. (FeCoNi)3(FeCr)-LDH shows excellent OER activity (overpotential is only 230 mV at 10 mA cm-2). A new platform for the creation of high-performance catalysts and high-entropy materials was established by the synthesis and design of HELDH.

Effect of Calcination Temperature on the Activity of Unsupported IrO2 Electrocatalysts for the Oxygen Evolution Reaction in Polymer Electrolyte Membrane Water Electrolyzers

Polymer electrolyte membrane (PEM) water electrolyzers suffer mainly from slow kinetics regarding the oxygen evolution reaction (OER). Noble metal oxides, like IrO2 and RuO2, are generally more active for OER than metal electrodes, exhibiting low anodic overpotentials and high catalytic activity. However, issues like electrocatalyst stability under continuous operation and cost minimization through a reduction in the catalyst loading are of great importance to the research community. In this study, unsupported IrO2 of various particle sizes (different calcination temperatures) were evaluated for the OER and as anode electrodes for PEM water electrolyzers. The electrocatalysts were synthesized by the modified Adams method, and the effect of calcination temperature on the properties of IrO2 electrocatalysts is investigated. Physicochemical characterization was conducted using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area measurement, high-resolution transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) analyses. For the electrochemical performance of synthesized electrocatalysts in the OER, cyclic voltammetry (CV) and linear sweep voltammetry (LSV) were conducted in a typical three-cell electrode configuration, using glassy carbon as the working electrode, which the synthesized electrocatalysts were cast on in a 0.5 M H2SO4 solution. The materials, as anode PEM water electrolysis electrodes, were further evaluated in a typical electrolytic cell using a Nafion®115 membrane as the electrolyte and Pt/C as the cathode electrocatalyst. The IrO2 electrocatalyst calcined at 400 °C shows high crystallinity with a 1.24 nm particle size, a high specific surface area (185 m2 g-1), and a high activity of 177 mA cm-2 at 1.8 V for PEM water electrolysis.

Metal-Oxides- and Metal-Oxyhydroxides-Based Nanocomposites for Water Splitting: An Overview

Water electrolysis is an important alternative technology for large-scale hydrogen production to facilitate the development of green energy technology. As such, many efforts have been devoted over the past three decades to producing novel electrocatalysis with strong electrochemical (EC) performance using inexpensive electrocatalysts. Transition metal oxyhydroxide (OxH)-based electrocatalysts have received substantial interest, and prominent results have been achieved for the hydrogen evolution reaction (HER) under alkaline conditions. Herein, the extensive research focusing on the discussion of OxH-based electrocatalysts is comprehensively highlighted. The general forms of the water-splitting mechanism are described to provide a profound understanding of the mechanism, and their scaling relation activities for OxH electrode materials are given. This paper summarizes the current developments on the EC performance of transition metal OxHs, rare metal OxHs, polymers, and MXene-supported OxH-based electrocatalysts. Additionally, an outline of the suggested HER, OER, and water-splitting processes on transition metal OxH-based electrocatalysts, their primary applications, existing problems, and their EC performance prospects are discussed. Furthermore, this review article discusses the production of energy sources from the proton and electron transfer processes. The highlighted electrocatalysts have received substantial interest to boost the synergetic electrochemical effects to improve the economy of the use of hydrogen, which is one of best ways to fulfill the global energy requirements and address environmental crises. This article also provides useful information regarding the development of OxH electrodes with a hierarchical nanostructure for the water-splitting reaction. Finally, the challenges with the reaction and perspectives for the future development of OxH are elaborated.

Synergistically Driven CoCr-LDH@VNiS2 as a Bifunctional Electrocatalyst for Overall Water Splitting and Flexible Supercapacitors

Utilizing alternative energy sources to fossil fuels has remained a significant issue for humanity. In this context, efficient earth-abundant bifunctional catalysts for water splitting and energy storage technologies like hybrid supercapacitors have become essential for achieving a sustainable future. Herein, CoCr-LDH@VNiS₂ was synthesized by hydrothermal synthesis. The CoCr-LDH@VNiS₂ catalyst entails 1.62 V cell voltage to reach the current density of 10 mA cm^-2 for overall water splitting. The CoCr-LDH@VNiS₂ electrode illustrates a high electrochemical specific capacitance (Csp) of 1380.9 F g^-1 at a current density of 0.2 A g^-1 and an outstanding stability with 94.76% retention. Moreover, the flexible asymmetric supercapacitor (ASC) achieved an energy density of 96.03 W h kg^-1@0.2 A g^-1 at a power density of 539.98 W kg^-1 with remarkable cyclic stability. The findings provide a new approach toward the rational design and synthesis of bifunctional catalysts for water splitting and energy storage.

Fast Modulation of d-Band Holes Quantity in the Early Reaction Stages for Boosting Acidic Oxygen Evolution

Synthesis of highly active and durable oxygen evolution reaction (OER) catalysts applied in acidic water electrolysis remains a grand challenge. Here, we construct a type of high-loading iridium single atom catalysts with tunable d-band holes character (h-HL-Ir SACs, ~17.2 wt% Ir) realized in the early OER operation stages. The in-situ X-ray absorption spectroscopy reveals that the quantity of the d-band holes of Ir active sites can be fast increased by 0.56 unit from the open circuit to a low working potential of 1.35 V. More remarkably, in-situ synchrotron infrared and Raman spectroscopies demonstrate the quick accumulation of *OOH and *OH intermediates over holes-modulated Ir sites in the early reaction voltages, achieving a rapid OER kinetics. As a result, this well-designed h-HL-Ir SACs exhibits superior performance for acidic OER with overpotentials of 216 mV @10 mA cm-2 and 259 mV @100 mA cm-2, corresponding to a small Tafel slope of 43 mV dec-1. The activity of catalyst shows no evident attenuation after 60 h operation in acidic environment. This work provides some useful hints for the design of superior acidic OER catalysts.

Mesoporous Manganese Oxides with High-Valent Mn Species and Disordered Local Structures for Efficient Oxygen Electrocatalysis

Active and nonprecious-metal bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are vital components of clean energy conversion devices such as regenerative fuel cells and rechargeable metal-air batteries. Porous manganese oxides (MnO_x) are promising electrocatalyst candidates because of their high surface area and the abundance of Mn. MnO_x catalysts exhibit various oxidation states and crystal structures, which critically affect their electrocatalytic activity. These effects remain elusive mainly because the synthesis of oxidation-state-controlled porous MnO_x with similar structural properties is challenging. In this work, four different mesoporous manganese oxides (m-MnO_x) were synthesized and used as model catalysts to investigate the effects of local structures and Mn valence states on the activity toward oxygen electrocatalysis. The following activity trends were observed: m-Mn₂O₃ > m-MnO₂ > m-MnO > m-Mn₃O₄ for the ORR and m-MnO₂ > m-Mn₂O₃ > m-MnO ≈ m-Mn₃O₄ for the OER. These activity trends suggest that high-valent Mn species (Mn(III) and Mn(IV)) with disordered atomic arrangements induced by nanostructuring significantly influence electrocatalysis. In situ X-ray absorption spectroscopy was used to analyze the changes in the oxidation states under the ORR and OER conditions, which showed the surface phase transformation and generation of active species during electrocatalysis.

The challenge of estimating kelp production in a turbid marine environment

Coastal kelp forests produce substantial marine carbon due to high annual net primary production (NPP) rates, but upscaling of NPP estimates over time and space remains difficult. We investigated the impact of variable underwater photosynthetically active radiation (PAR) and photosynthetic parameters on photosynthetic oxygen production of Laminaria hyperborea, the dominant NE-Atlantic kelp species, throughout summer 2014. Collection depth of kelp had no effect on chlorophyll a content, pointing to a high photoacclimation potential of L. hyperborea towards incident light. However, chlorophyll a and photosynthesis versus irradiance parameters differed significantly along the blade gradient when normalized to fresh mass, potentially introducing large uncertainties in NPP upscaling to whole thalli. Therefore, we recommend a normalization to kelp tissue area, which is stable over the blade gradient. Continuous PAR measurements revealed a highly variable underwater light climate at our study site (Helgoland, North Sea) in summer 2014, reflected by PAR attenuation coefficients (Kd ) between 0.28 and 0.87 m-1 . Our data highlight the importance of continuous underwater light measurements or representative average values using a weighted Kd to account for large PAR variability in NPP calculations. Strong winds in August increased turbidity, resulting in a negative carbon balance at depths >3-4 m over several weeks, considerably impacting kelp productivity. Estimated daily summer NPP over all four depths was 1.48 ± 0.97 g C · m-2 seafloor · d-1 for the Helgolandic kelp forest, which is in the range of other kelp forests along European coastlines.

Design of an Online Electrochemical Mass Spectrometry System to Study Gas Evolution from Cells with Lean and Volatile Electrolytes

Gas evolution in high-energy Li-ion batteries remains a pervasive problem for a multitude of chemistries, jeopardizing the electrochemical performance and safety for consumers of electric vehicles. Many electrode-electrolyte degradation processes evolve gasses that may be detected in-situ with online electrochemical mass spectrometry (OEMS). In this work, details are provided for the setup and validation of an OEMS system that operates well under lean and volatile electrolyte conditions. Quite notably, the OEMS cells with only 40 µL of electrolyte and intermittent headspace sampling exhibit comparable electrochemical performance to flooded coin-cells. It is demonstrated that the onset time, shape, and magnitude of the gas evolution profiles calculated from mass spectrometer measurements match well to a known pressure reference through the use of an empirically determined fraction of removal. The off-gassing characteristics from a set of layered-oxide materials, NMC532, NMC811, and LNO, are used to further validate the OEMS setup against the literature. It is shown that many of the features present in the OEMS curves for equivalent systems from other groups are captured by this OEMS system. At an upper cut-off voltage of 4.4 V, LNO exhibits an intense release of CO₂ , O₂ , and CO gas relative to NMC532 and NMC811.

Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Metal-organic framework (MOF) solids with their variable functionalities are relevant for energy conversion technologies. However, the development of electroactive and stable MOFs for electrocatalysis still faces challenges. Here, a molecularly engineered MOF system featuring a 2D coordination network based on mercaptan-metal links (e.g., nickel, as for Ni(DMBD)-MOF) is designed. The crystal structure is solved from microcrystals by a continuous-rotation electron diffraction (cRED) technique. Computational results indicate a metallic electronic structure of Ni(DMBD)-MOF due to the Ni-S coordination, highlighting the effective design of the thiol ligand for enhancing electroconductivity. Additionally, both experimental and theoretical studies indicate that (DMBD)-MOF offers advantages in the electrocatalytic oxygen evolution reaction (OER) over non-thiol (e.g., 1,4-benzene dicarboxylic acid) analog (BDC)-MOF, because it poses fewer energy barriers during the rate-limiting *O intermediate formation step. Iron-substituted NiFe(DMBD)-MOF achieves a current density of 100 mA cm^-2 at a small overpotential of 280 mV, indicating a new MOF platform for efficient OER catalysis.

Electrocatalysts for the Oxygen Evolution Reaction in Acidic Media

The well-established proton exchange membrane (PEM)-based water electrolysis, which operates under acidic conditions, possesses many advantages compared to alkaline water electrolysis, such as compact design, higher voltage efficiency, and higher gas purity. However, PEM-based water electrolysis is hampered by the low efficiency, instability, and high cost of anodic electrocatalysts for the oxygen evolution reaction (OER). In this review, the recently reported acidic OER electrocatalysts are comprehensively summarized, classified, and discussed. The related fundamental studies on OER mechanisms and the relationship between activity and stability are particularly highlighted in order to provide an atomistic-level understanding for OER catalysis. A stability test protocol is suggested to evaluate the intrinsic activity degradation. Some current challenges and unresolved questions, such as the usage of carbon-based materials and the differences between the electrocatalyst performances in acidic electrolytes and PEM-based electrolyzers are also discussed. Finally, suggestions for the most promising electrocatalysts and a perspective for future research are outlined. This review presents a fresh impetus and guideline to the rational design and synthesis of high-performance acidic OER electrocatalysts for PEM-based water electrolysis.

Regulation of Atomic Fe-Spin State by Crystal Field and Magnetic Field for Enhanced Oxygen Electrocatalysis in Rechargeable Zinc-Air Batteries

Highly-active and low-cost bifunctional electrocatalysts for oxygen reduction and evolution are essential in rechargeable metal-air batteries, and single atom catalysts with Fe-N-C are promising candidates. However, the activity still needs to be boosted, and the origination of spin-related oxygen catalytic performance is still uncertain. Herein, an effective strategy to regulate local spin state of Fe-N-C through manipulating crystal field and magnetic field is proposed. The spin state of atomic Fe can be regulated from low spin to intermediate spin and to high spin. The cavitation of dxz and dyz orbitals of high spin Fe(Ⅲ) can optimize the O2 adsorption and promote the rate-determining step (*O2 to *OOH). Benefiting from these merits, the high spin Fe-N-C electrocatalyst displays the highest oxygen electrocatalytic activities. Furthermore, the high spin Fe-N-C-based rechargeable zinc-air battery displays a high power density of 170 mW cm-2 and good stability.

Mn-Incorporation-Induced Phase Transition in Bottom-Up Synthesized Colloidal Sub-1-nm Ni(OH)2 Nanosheets for Enhanced Oxygen Evolution Catalysis

Sub-1-nm structures are attractive for diverse applications owing to their unique properties compared to those of conventional nanomaterials. Transition-metal hydroxides are promising catalysts for oxygen evolution reaction (OER), yet there remains difficulty in directly fabricating these materials within the sub-1-nm regime, and the realization of their composition and phase tuning is even more challenging. Here we define a binary-soft-template-mediated colloidal synthesis of phase-selective Ni(OH)₂ ultrathin nanosheets (UNSs) with 0.9 nm thickness induced by Mn incorporation. The synergistic interplay between binary components of the soft template is crucial to their formation. The unsaturated coordination environment and favorable electronic structures of these UNSs, together with in situ phase transition and active site evolution confined by the ultrathin framework, enable efficient and robust OER electrocatalysis. They exhibit a low overpotential of 309 mV at 100 mA cm^-2 as well as remarkable long-term stability, representing one of the most high-performance noble-metal-free catalysts.

Reinforcing CoO Covalency via Ce(4f)─O(2p)─Co(3d) Gradient Orbital Coupling for High-Efficiency Oxygen Evolution

Rare-earth (RE)-based transition metal oxides (TMO) are emerging as a frontier toward the oxygen evolution reaction (OER), yet the knowledge regarding their electrocatalytic mechanism and active sites is very limited. In this work, atomically dispersed Ce on CoO is successfully designed and synthesized by an effective plasma (P)-assisted strategy as a model (P-Ce SAs@CoO) to investigate the origin of OER performance in RE-TMO systems. The P-Ce SAs@CoO exhibits favorable performance with an overpotential of only 261 mV at 10 mA cm^-2 and robust electrochemical stability, superior to individual CoO. X-ray absorption spectroscopy and in situ electrochemical Raman spectroscopy reveal that the Ce-induced electron redistribution inhibits CoO bond breakage in the CoOCe unit site. Theoretical analysis demonstrates that the gradient orbital coupling reinforces the CoO covalency of the Ce(4f)─O(2p)─Co(3d) unit active site with an optimized Co-3d-e_g occupancy, which can balance the adsorption strength of intermediates and in turn reach the apex of the theoretical OER maximum, in excellent agreement with experimental observations. It is believed that the establishment of this Ce-CoO model can set a basis for the mechanistic understanding and structural design of high-performance RE-TMO catalysts.

Pd-PdO Nanodomains on Amorphous Ru Metallene Oxide for High-Performance Multifunctional Electrocatalysis

Developing highly efficient multifunctional electrocatalysts is crucial for future sustainable energy  pursuits, but remains a great challenge. Herein, a facile synthetic strategy is used to confine atomically thin Pd-PdO nanodomains to amorphous Ru metallene oxide (RuO₂ ). The as-synthesized electrocatalyst (Pd₂ RuOx-0.5 h) exhibits excellent catalytic activity toward the pH-universal hydrogen evolution reaction (η₁₀  = 14 mV in 1 m KOH, η₁₀  = 12 mV in 0.5 m H₂ SO₄ , and η₁₀  = 22 mV in 1 m PBS), alkaline oxygen evolution reaction (η₁₀  = 225 mV), and overall water splitting (E₁₀  = 1.49 V) with high mass activity and operational stability. Further reduction endows the material (Pd₂ RuOx-2 h) with a promising alkaline oxygen reduction activity, evidenced by high halfway potential, four-electron selectivity, and excellent poison tolerance. The enhanced catalytic activity is attributed to the rational integration of favorable nanostructures, including 1) the atomically thin nanosheet morphology, 2) the coexisting amorphous and defective crystalline phases, and 3) the multi-component heterostructural features. These structural factors effectively regulate the material's electronic configuration and the adsorption of intermediates at the active sites for favorable reaction energetics.

Catalyst-Support Interactions Promoted Acidic Electrochemical Oxygen Evolution Catalysis: A Mini Review

In the context of the growing human demand for green secondary energy sources, proton-exchange membrane water electrolysis (PEMWE) is necessary to meet the high-efficiency production of high-purity hydrogen required for proton-exchange membrane fuel cells (PEMFCs). The development of stable, efficient, and low-cost oxygen evolution reaction (OER) catalysts is key to promoting the large-scale application of hydrogen production by PEMWE. At present, precious metals remain irreplaceable in acidic OER catalysis, and loading the support body with precious metal components is undoubtedly an effective strategy to reduce costs. In this review, we will discuss the unique role of common catalyst-support interactions such as Metal-Support Interactions (MSIs), Strong Metal-Support Interactions (SMSIs), Strong Oxide-Support Interactions (SOSIs), and Electron-Metal-Support Interactions (EMSIs) in modulating catalyst structure and performance, thereby promoting the development of high-performance, high-stability, low-cost noble metal-based acidic OER catalysts.

Roll-to-Roll Production of Electrocatalysts Achieving High-Current Alkaline Water Splitting

Scalable production of electrocatalysts capable of performing high-current water splitting is crucial to support green energy utilization. We adopted acidic redox-assisted deposition (ARD) to realize the continuous roll-to-roll fabrication of a strongly adherent cobalt manganese oxyhydroxide (CMOH) film on Ni foam under ambient conditions in water. The as-fabricated products show uniform CMOH coverage and oxygen evolution activities with dimensions as large as 5 m length by 0.25 m width. Also, we converted CMOH into a metallic form (denoted as CM) with the preserved high adhesion to serve as a high-current hydrogen evolution electrocatalyst. Our results reveal that the insufficient adhesion of powder forms electrocatalysts (i.e., Pt and RuO2 as benchmarks), even with the binder, at high-current electrolysis (>1000 mA) can be solved using the fabricated CM||CMOH cell. With an active area of 1 cm × 1 cm assembly in anion exchange membrane (AEM) electrolyzers, we observed the remarkable record of alkaline electrolysis stably at 5000 mA. This result established a new benchmark record on the high-current water splitting research.

Electronic Structure Modulation Induced by Cobalt-doping and Lattice-Contracting on Armor-Like Ruthenium Oxide Drives pH-Universal Oxygen Evolution

Exquisite design of RuO₂ -based catalysts to simultaneously improve activity and stability under harsh conditions and reduce the Ru dosage is crucial for advancing energy conversion involving oxygen evolution reaction (OER). Herein, a distinctive cobalt-doped RuO_x framework is constructed on Co₃ O₄ nanocones (Co₃ O₄ @CoRuO_x ) as a promising strategy to realize above urgent desires. Extensive experimental characterization and theoretical analysis demonstrate that cobalt doped in RuO_x lattice brings the oxygen vacancies and lattice contraction, which jointly redistribute the electron configuration of RuO_x . The optimized d-band center balances the adsorption energies of oxygenated intermediates, lowing the thermodynamical barrier of the rate-determining step; and meanwhile, the over-oxidation and dissolution of Ru species are restrained because of the p-band down-shifting of the lattice oxygen. Co₃ O₄ @CoRuO_x with 3.7 wt.% Ru delivers the extremely low OER overpotentials at 10 mA cm^-2 in alkaline (167 mV), neutral (229 mV), and acidic electrolytes (161 mV), and super operating stability over dozens of hours. The unprecedented activity ranks first in all pH-universal OER catalysts reported so far. These findings provide a route to produce robust low-loading Ru catalysts and an engineering approach for regulating the central active metal through synergy of co-existing defects to improve the catalytic performance and stability.

Engineering Vacancies at the 2D Nanocrystals for Robust Bifunctional Electrocatalysts

Hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) through water decomposition are feasible methods to produce green and clean energy. Herein, we report a facile two-step strategy for the preparation of non-noble metal defect-rich nanosheets by an electrochemical process at room temperature. First-principle calculations are used to study the bifunctional catalytic reaction mechanism of defect engineering in transition-metal dichalcogenides (TMDs); from the first-principle calculations, we predicted that the rich S vacancies on the nanosheet promoted electron transfer and reduced the energy barrier of electrocatalysis. As a substantiation, we conducted HER/OER electrochemical characterizations and found that the defect-rich atomic-thick tantalum sulfide is a kind of dual-function electrocatalyst with enhanced comprehensive properties of Tafel slope (39 mV/dec for HER, 38 mV/dec for OER) and low overpotential (0.099 V for HER, 0.153 V for OER) in acidic and alkaline environments, respectively. Likewise, the defect-rich catalysts exhibit high stability in acidic and alkaline solutions, which have potential applications as electrocatalysts for the large-scale production of hydrogen and oxygen.

Engineering Amorphous/Crystalline Structure of Manganese Oxide for Superior Oxygen Catalytic Performance in Rechargeable Zinc-Air Batteries

Although amorphous materials are popular in oxygen electrocatalysis, their performance requires further improvement to meet the need for rechargeable zinc-air batteries. In this work, an amorphous/crystalline layered manganese oxide (ACMO) was designed, and its unique amorphous/crystalline homogeneous structure activated its oxygen reduction activity with a positive half-wave potential of 0.81 V and oxygen evolution activity with a moderate overpotential of 407 mV at 10 mA cm^-2 . Moreover, the amorphous/crystalline structure endowed ACMO with excellent stability. While employed as the air-electrode material for rechargeable zinc-air batteries, ACMO overcame the poor cycling stability of manganese oxide and cycled stably for 1000 cycles (≈17 days) at 10 mA cm^-2 . Besides, it delivered a high power density of 159.7 mW cm^-2 and a narrow voltage gap of 0.66 V. This work gives an insight into designing oxide materials with amorphous/crystalline structure and feasible guidance for harmonizing electrochemical activity and stability.

2D Covalent Organic Frameworks Toward Efficient Photocatalytic Hydrogen Evolution

Efficiently producing clean energy is of great importance for sustainable development of the environment. Solar-driven water splitting for H₂ evolution has an important role among the renewable energy technologies. Developing high-performance and cost-effective photocatalysts is still a critical task before practical application. 2D Covalent organic frameworks (COFs) as photocatalysts have recently attracted widespread interest thanks to their tunable optical bandgaps, tailor-made functionality, excellent crystallinity, high specific surface area, and good photo- and chemical stability. This Review focuses on the representative progress and remaining challenges in 2D COF-based photocatalysts for hydrogen evolution.

D139N mutation of PsbP enhances the oxygen-evolving activity of photosystem II through stabilized binding of a chloride ion

Photosystem II (PSII) is a multisubunit membrane protein complex that catalyzes light-driven oxidation of water to molecular oxygen. The chloride ion (Cl^-) has long been known as an essential cofactor for oxygen evolution by PSII, and two Cl^- ions (Cl-1 and Cl-2) have been found to specifically bind near the Mn₄CaO₅ cluster within the oxygen-evolving center (OEC). However, despite intensive studies on these Cl^- ions, little is known about the function of Cl-2, the Cl^- ion that is associated with the backbone nitrogens of D1-Asn338, D1-Phe339, and CP43-Glu354. In green plant PSII, the membrane extrinsic subunits-PsbP and PsbQ-are responsible for Cl^- retention within the OEC. The Loop 4 region of PsbP, consisting of highly conserved residues Thr135-Gly142, is inserted close to Cl-2, but its importance has not been examined to date. Here, we investigated the importance of PsbP-Loop 4 using spinach PSII membranes reconstituted with spinach PsbP proteins harboring mutations in this region. Mutations in PsbP-Loop 4 had remarkable effects on the rate of oxygen evolution by PSII. Moreover, we found that a specific mutation, PsbP-D139N, significantly enhances the oxygen-evolving activity in the absence of PsbQ, but not significantly in its presence. The D139N mutation increased the Cl^- retention ability of PsbP and induced a unique structural change in the OEC, as indicated by light-induced Fourier transform infrared (FTIR) difference spectroscopy and theoretical calculations. Our findings provide insight into the functional significance of Cl-2 in the water-oxidizing reaction of PSII.

Li-Deficient Materials-Decoration Restrains Oxygen Evolution Achieving Excellent Cycling Stability of Li-Rich Mn-Based Cathode

With the increasing demand for high energy density and rapid charging performance, Li-rich materials have been the up and coming cathodes for next-generation lithium-ion batteries. However, because of oxygen evolution and structural instability, the commercialization of Li-rich materials is extremely retarded by their poor electrochemical performances. In this work, Li-deficient materials Li_0.3NbO₂ and (Nb_0.62Li_0.15)TiO₃ are applied to functionalize the surface of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂, aiming to suppress oxygen evolution and increase structural stability in LIBs. In addition, a fast Li-ion transport channel is beneficial to enhance Li⁺ diffusion kinetics. The results demonstrate that the electrodes decorated with Li_0.3NbO₂ and (Nb_0.62Li_0.15)TiO₃ materials exhibit more stable cycling stability after long-term cycling and outstanding rate capability.

Freestanding 2D NiFe Metal-Organic Framework Nanosheets: Facilitating Proton Transfer via Organic Ligands for Efficient Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is crucial to electrochemical hydrogen production. However, designing and fabricating efficient electrocatalysts still remains challenging. By confinedly coordinating organic ligands with metal species in layered double hydroxides (LDHs), an innovative LDHs-assisted approach is developed to facilely synthesize freestanding bimetallic 2D metal-organic framework nanosheets (2D MOF NSs), preserving the metallic components and activities in OER. Furthermore, the research has demonstrated that the incorporation of carboxyl organic ligands coordinated with metal atoms as proton transfer mediators endow 2D MOF NSs with efficient proton transfer during the electrochemical OH_ads  → O_ads transition. These freestanding NiFe-2D MOF NSs require a small overpotential of 260 mV for a current density of 10 mA cm^-2 . When this strategy is applied to LDH nanosheets grown on nickel foam, the overpotential can be reduced to 221 mV. This outstanding OER activity supports the capability of multimetallic organic frameworks for the rational design of water oxidation electrocatalysts. This strategy provides a universal path to the synthesis of 2D MOF NSs that can be used as electrocatalysts directly.

Confining High-Valence Iridium Single Sites onto Nickel Oxyhydroxide for Robust Oxygen Evolution

Enhancing activity and stability of iridium- (Ir-) based oxygen evolution reaction (OER) catalysts is of great significance in practice. Here, we report a vacancy-rich nickel hydroxide stabilized Ir single-atom catalyst (Ir₁-Ni(OH)₂), which achieves long-term OER stability over 260 h and much higher mass activity than commercial IrO₂ in alkaline media. In situ X-ray absorption spectroscopy analysis certifies the obvious structure reconstruction of catalyst in OER. As a result, an active structure in which high-valence and peripheral oxygen ligands-rich Ir sites are confined onto the nickel oxyhydroxide surface is formed. In addition, the precise introduction of atomized Ir not only surmounts the large-range dissolution and agglomeration of Ir but also suppresses the dissolution of substrate in OER. Theoretical calculations further account for the activation of Ir single atoms and the promotion of oxygen generation by high-valence Ir, and they reveal that the deprotonation process of adsorbed OH is rate-determining.

Impact of Atomic Rearrangement and Single Atom Stabilization on MoSe2 @NiCo2 Se4 Heterostructure Catalyst for Efficient Overall Water Splitting

High overpotentials required to cross the energy barriers of both hydrogen and oxygen evolution reactions (HER and OER) limit the overall efficiency of hydrogen production by electrolysis of water. The rational design of heterostructures and anchoring single-atom catalysts (SAC) are the two successful strategies to lower these overpotentials, but realization of such advanced nanostructures with adequate electronic control is challenging. Here, the heterostructure of edge-oriented molybdenum selenide (MoSe₂ ) and nickel-cobalt-selenide (NiCo₂ Se₄ ) realized through selenization of mixed metal oxide/hydroxide is presented. The as-developed sheet-on-sheet heterostructure shows excellent HER performance, requiring an overpotential of 89 mV to get a current density 10 mA cm^-2 and a Tafel slope of 65 mV dec^-1 . Further, resultant MoSe₂ @NiCo₂ Se₄ is photochemically decorated with single-atom iridium, which on electrochemical surface reconstruction displays outstanding OER activity, requiring only 200 and 313 mV overpotentials for 10 and 500 mA cm^-2 current densities, respectively. A full cell electrolyzer comprising of MoSe₂ @NiCo₂ Se₄ as cathode and its SAC-Ir decorated counterpart as anode requires only 1.51 V to attain 10 mA cm^-2 current density. Density functional theory calculation reveals the importance of rational heterostructure design and synergistic electronic coupling of single atom iridium in HER and OER processes, respectively.

Interfacial Assemble of Prussian Blue Analog to Access Hierarchical FeNi (oxy)-Hydroxide Nanosheets for Electrocatalytic Water Splitting

Developing facile methods for the synthesis of active and stable electrocatalysts is vitally important to realize overall water splitting. Here, we demonstrate a practical method to obtain FeNiOOH nanosheets on nickel foam (NF) as bifunctional electrocatalyst by growing a FeCo Prussian blue analog with further in situ oxidation under ambient conditions. The binder-free, self-standing FeNiOOH/NF electrode with hierarchical nanostructures requires low overpotentials of 260 mV and 240 mV at a current density of 50 mA cm-2 for oxygen evolution reaction and hydrogen evolution reaction, respectively, in 1.0 M KOH solution. Therefore, an alkaline water electrolyzer constructed by bifunctional FeNiOOH/NF electrode as both anode and cathode delivers 50 mA cm-2 under a cell voltage of 1.74 V with remarkable stability, which outperforms the IrO2-Pt/C-based electrolyzer. The excellent performance could be ascribed to the superior FeNiOOH intrinsic activity and the hierarchical structure. This work provides a cost-efficient surface engineering method to obtain binder-free, self-standing bifunctional electrocatalyst on commercial NF, which could be further extended to other energy and environment applications.

Phase-Tuned MoS2 and Its Hybridization with Perovskite Oxide as Bifunctional Catalyst: A Rationale for Highly Stable and Efficient Water Splitting

The efficient realization of bifunctional catalysts has immense opportunities in energy conversion technologies such as water splitting. Transition metal dichalcogenides (TMDs) are considered excellent hydrogen evolution catalysts owing to their hierarchical atomic-scale layered structure and feasible phase transition. On the other hand, for efficient oxygen evolution, perovskite oxides offer the best performance based on their rational design and flexible compositional structure. A unique way to achieve an efficient hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in a single-cell configuration is through the hybridization of TMDs with perovskite oxides to form a bifunctional electrocatalyst. Here, we report a simple yet effective strategy to inherently tune the intrinsic properties of a TMD based on MoS₂ and its hybridization with LaCoO₃ perovskite oxide to deliver enhanced electrocatalytic activity for both the HER and OER. Detailed Raman and XPS measurements highlighted a clear phase transformation of MoS₂ from a semiconducting to metallic phase by effectively tailoring the precursor compositions. Based on this, the morphological features yielded an interesting spherical flower-shaped nanostructure with vertically aligned petals of MoS₂ with increased surface-active edge sites suitable for the HER. Subsequent hybridization of nanostructured MoS₂ with LaCoO₃ provides a bifunctional catalytic system with an increased BET surface area of 33.4 m²/g for an overall improvement in water splitting with a low onset potential (HER: 242 mV and OER: 1.6 V @10 mA cm^-2) and Tafel slope (HER: 78 mV dec^-1; OER: 62.5 mV dec^-1). Additionally, the bifunctional catalyst system exhibits long-term stability of up to ∼400 h under continuous operation at a high current density of 50 mA cm^-2. These findings will pave the way for developing cost-effective and less complex bifunctional catalysts by simply and inherently tuning the influential material properties for full-cell electrochemical water splitting.

Highly Efficient and Durable Electrocatalysis by a Molecular Catalyst with Long Alkoxyl Chains Immobilized on a Carbon Electrode for Water Oxidation

A dinuclear Ru complex, proximal,proximal-[Ru₂L(C₈Otpy)₂(OH)(OH₂)]³⁺ (C₈Otpy = 4'-octyloxy-2,2'; 6',2″-terpyridine) (1) with long alkoxyl chains, was synthesized to be immobilized on a carbon paper (CP) electrode via hydrophobic interactions between the long alkoxyl chains and the CP surface. The 1/CP electrode demonstrated efficient electrocatalytic water oxidation with a low overpotential (η_onset) of 0.26 V (based on the onset potential for water oxidation) in an aqueous medium at pH 7.0, which is compared advantageously with those of hitherto-reported molecular anodes for water oxidation. The active species of Ru^IIIRu^III(μ-OO) with a μ-OO bridge was involved in water oxidation at 0.95 V versus Ag/AgCl. As the applied potential increased to 1.40 V, water oxidation was promoted by participation of the more active species of Ru^IIIRu^IV(μ-OO), and very durable electrocatalysis was gained for more than 35 h without elution of 1 into the electrolyte solution. The introduced long alkoxyl chains act as a dual role of the linker of 1 on the CP surface and decrease the η value. Theoretical investigation provides insights into the O-O bond formation mechanism and the activity difference between Ru^IIIRu^III(μ-OO) and Ru^IIIRu^IV(μ-OO) for electrocatalytic water oxidation.

V2 O3 /MnS Arrays as Bifunctional Air Electrode for Long-Lasting and Flexible Rechargeable Zn-Air Batteries

Exploring highly efficient, stable, and cost-effective bifunctional electrocatalysts is crucial for the wide commercialization of rechargeable Zn-air batteries. Herein, a vanadium-oxide-based hybrid air electrode comprising a heterostructure of V₂ O₃ and MnS (V₂ O₃ /MnS) is reported. The V₂ O₃ /MnS catalyst shows a decent catalytic activity that is comparable to Pt/C toward the oxygen reduction reaction and acceptable toward oxygen evolution. The extraordinary stability as well as the low cost set the V₂ O₃ /MnS among the best bifunctional oxygen electrocatalysts. In a demonstration of an assembled liquid-state Zn-air battery using V₂ O₃ /MnS as cathode, high power density (118 mW cm^-2 ), specific capacity (808 mAh g_Zn ^-1 ), and energy density (970 Wh kg_Zn ^-1 ), as well as the outstanding rechargeability and durability for 4000 cycles (>1333 h, i.e., >55 days) are enabled. The V₂ O₃ /MnS is also integrated into an all-solid-state Zn-air battery to demonstrate its great potential as a flexible power source for next-generation electronics. Density functional theory calculations further elucidate the origin of the intrinsic activity and stability of the V₂ O₃ /MnS heterostructure.

Oxygen Redox Versus Oxygen Evolution in Aqueous Electrolytes: Critical Influence of Transition Metals

Aqueous lithium-ion batteries are promising electrochemical energy storage devices owing to their sustainable nature, low cost, high level of safety, and environmental benignity. The recent development of a high-salt-concentration strategy for aqueous electrolytes, which significantly expands their electrochemical potential window, has created attractive opportunities to explore high-performance electrode materials for aqueous lithium-ion batteries. This study evaluates the compatibility of large-capacity oxygen-redox cathodes with hydrate-melt electrolytes. Using conventional oxygen-redox cathode materials (Li₂ RuO₃ , Li_1.2 Ni_0.13 Co_0.13 Mn_0.54 O₂ , and Li_1.2 Ni_0.2 Mn_0.6 O₂ ), it is determined that avoiding the use of transition metals with high catalytic activity for the oxygen evolution reaction is the key to ensuring the stable progress of the oxygen redox reaction in concentrated aqueous electrolytes.

Processing of D1 Protein: A Mysterious Process Carried Out in Thylakoid Lumen

In oxygenic photosynthetic organisms, D1 protein, a core subunit of photosystem II (PSII), displays a rapid turnover in the light, in which D1 proteins are distinctively damaged and immediately removed from the PSII. In parallel, as a repair process, D1 proteins are synthesized and simultaneously assembled into the PSII. On this flow, the D1 protein is synthesized as a precursor with a carboxyl-terminal extension, and the D1 processing is defined as a step for proteolytic removal of the extension by a specific protease, CtpA. The D1 processing plays a crucial role in appearance of water-oxidizing capacity of PSII, because the main chain carboxyl group at carboxyl-terminus of the D1 protein, exposed by the D1 processing, ligates a manganese and a calcium atom in the Mn₄CaO₅-cluster, a special equipment for water-oxidizing chemistry of PSII. This review focuses on the D1 processing and discusses it from four angles: (i) Discovery of the D1 processing and recognition of its importance: (ii) Enzyme involved in the D1 processing: (iii) Efforts for understanding significance of the D1 processing: (iv) Remaining mysteries in the D1 processing. Through the review, I summarize the current status of our knowledge on and around the D1 processing.

Nanostructure of the laser-modified transition metal nanocomposites for water splitting

Although hydrogen is considered by many to be the green fuel of the future, nowadays it is primarily produced through steam reforming, which is a process far from ecological. Therefore, emphasis is being put on the development of electrodes capable of the efficient production of hydrogen and oxygen from water. To make the green alternative possible, the solution should be cost-efficient and well processable, generating less waste which is a huge challenge. In this work, the laser-based modification technique of the titania nanotubes containing sputtered transition metal species (Fe, Co, Ni, and Cu) was employed. The characteristics of the electrodes are provided both for the hydrogen and oxygen evolution reactions, where the influence of the laser treatment has been found to have the opposite effect. The structural and chemical analysis of the substrate material provides insight into pathways towards more efficient, low-temperature water splitting. Laser-assisted integration of transition metal with the tubular nanostructure results in the match-like structure where the metal species are accumulated at the head. The electrochemical data indicates a significant decrease in material resistance that leads to an overpotential of only +0.69 V at 10 mA cm^-2for nickel-modified material.

Bifunctional rare metal-free electrocatalysts synthesized entirely from biomass resources

The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are important processes for various energy devices, including polymer electrolyte fuel cells, rechargeable metal-air batteries, and water electrolyzers. We herein report the preparation of a rare metal-free and highly efficient ORR/OER electrocatalyst by calcination of a mixture of blood meal and ascidian-derived cellulose nanofibers. The obtained carbon alloys showed high ORR/OER performances and proved to be promising electrocatalysts. The carbon alloys synthesized entirely from biomass resources not only lead to a new electrocatalyst fabrication process but also contribute to CO2 reduction and the realization of a good life-cycle assessment value in fabrication of a sustainable energy device.

Boosting Electrochemical Water Oxidation on NiFe (oxy) Hydroxides by Constructing Schottky Junction toward Water Electrolysis under Industrial Conditions

The practical deployment of promising NiFe-based oxygen evolution reaction (OER) electrocatalysts is heavily limited due to the constrain in both stability and activity under industrial conditions. Herein, a 3D free-standing NiFe(oxy)hydroxide-based electrode with Schottky junction is constructed, in which NiFe(oxy)hydroxide (NiFe(OH)_x ) nanosheets are chemically assembled on the top of metal-like Ni₃ S₂ scaffold that are in situ formed on commercial Ni mesh. Such an assembly enhances the binding strength of each components, promotes the charge transfer across the interfaces, and modulates the electronic and nanostructural features of NiFe(OH)_x . Consequently, the electrode delivers current densities of as high as 500 and 1000 mA cm^-2 for OER at overpotentials of only 248 and 270 mV with long-term stability in 1 m KOH. When it was paired with a NiMo hydrogen evolution cathode in a practical two-electrode system, a current density of 1000 mA cm^-2 is achieved at a low cell voltage of ≈1.61 V at 80 °C in 30% KOH without losing performance for at least 1500 h. This is the best performance reported thus far for alkaline water electrolysis under industrial conditions, demonstrating its great potential for practical applications.

Elucidating and Mitigating High-Voltage Degradation Cascades in Cobalt-Free LiNiO2 Lithium-Ion Battery Cathodes

LiNiO₂ (LNO) is a promising cathode material for next-generation Li-ion batteries due to its exceptionally high capacity and cobalt-free composition that enables more sustainable and ethical large-scale manufacturing. However, its poor cycle life at high operating voltages over 4.1 V impedes its practical use, thus motivating efforts to elucidate and mitigate LiNiO₂ degradation mechanisms at high states of charge. Here, a multiscale exploration of high-voltage degradation cascades associated with oxygen stacking chemistry in cobalt-free LiNiO₂ , is presented. Lattice oxygen loss is found to play a critical role in the local O3-O1 stacking transition at high states of charge, which subsequently leads to Ni-ion migration and irreversible stacking faults during cycling. This undesirable atomic-scale structural evolution accelerates microscale electrochemical creep, cracking, and even bending of layers, ultimately resulting in macroscopic mechanical degradation of LNO particles. By employing a graphene-based hermetic surface coating, oxygen loss is attenuated in LNO at high states of charge, which suppresses the initiation of the degradation cascade and thus substantially improves the high-voltage capacity retention of LNO. Overall, this study provides mechanistic insight into the high-voltage degradation of LNO, which will inform ongoing efforts to employ cobalt-free cathodes in Li-ion battery technology.