Combination of electromembrane extraction with dispersive liquid–liquid microextraction followed by gas chromatographic analysis as a fast and sensitive technique for determination of tricyclic antidepressants

Electroextraction and electromembrane extraction: Advances in hyphenation to analytical techniques

Electroextraction (EE) and electromembrane extraction (EME) are sample preparation techniques that both require an electric field that is applied over a liquid-liquid system, which enables the migration of charged analytes. Furthermore, both techniques are often used to pre-concentrate analytes prior to analysis. In this review an overview is provided of the body of literature spanning April 2012-November 2015 concerning EE and EME, focused on hyphenation to analytical techniques. First, the theoretical aspects of concentration enhancement in EE and EME are discussed to explain extraction recovery and enrichment factor. Next, overviews are provided of the techniques based on their hyphenation to LC, GC, CE, and direct detection. These overviews cover the compounds and matrices, experimental aspects (i.e. donor volume, acceptor volume, extraction time, extraction voltage, and separation time) and the analytical aspects (i.e. limit of detection, enrichment factor, and extraction recovery). Techniques that were either hyphenated online to analytical techniques or show high potential with respect to online hyphenation are highlighted. Finally, the potential future directions of EE and EME are discussed.

Application of hollow fiber liquid phase microextraction and dispersive liquid–liquid microextraction techniques in analytical toxicology

The recent developments in hollow fiber liquid phase microextraction and dispersive liquid –liquid microextraction are reviewed. Applications of these newly emerging developments in extraction and preconcentration of a vast category of compounds including heavy metals, pesticides, pharmaceuticals and abused drugs in complex matrices (environmental and biological matrices) are reviewed and discussed. The new developments in these techniques including the use of solvents lighter than water, ionic liquids and supramolecular solvents are also considered. Applications of these new solvents reduce the use of toxic solvents and eliminate the centrifugation step, which reduces the extraction time.

Electrically stimulated liquid-based extraction techniques in bioanalysis

Sample preparation is a vital and inseparable part of an analytical procedure. This issue has motivated the analytical research community around the world to develop new, fast and cost-effective extraction methods which can eliminate interfering substances, provide high preconcentration factors and increase the determination sensitivity. Electrical field induced extraction technique is a topic that has received major attention in recent years. This fact can be attributed to the considerable advantages provided by imposition of an electrical driving force especially control of different properties of an extraction system such as selectivity, cleanup, rate and efficiency. In this review, focus is centered on the electrical field induced liquid phase extraction techniques and their potential for bioanalysis.

A novel approach to the consecutive extraction of drugs with different properties via on chip electromembrane extraction

Lab on chip electromembrane extraction coupled with HPLC was introduced for analysis of betaxolol, naltrexone and nalmefene in biological samples.

Rotating electrode in electro membrane extraction: a new and efficient methodology to increase analyte mass transfer

Rotating electrode electromembrane extraction (REEME) as a new EME approach was introduced for the extraction of basic drugs from different matrices.

Dispersive liquid-liquid microextraction: trends in the analysis of biological samples

Dispersive liquid-liquid microextraction (DLLME) is a recent microextraction technique that was first developed by Rezaee and co-workers in 2006. It allows the simultaneous extraction and preconcentration of analytes into a micro-volume of extracting solvent based on a ternary solvent system involving an aqueous phase, a nonpolar water immiscible high-density solvent that acts as extraction phase, and a disperser solvent, which is often polar and water miscible. This article presents an overview of DLLME applications in the analysis of biological samples (e.g., plasma and urine). Aside from the classical DLLME applications using high density extraction solvents, recent advances in the use of low density solvents and ionic liquids are also discussed. Although most of the applications deal with the analysis of organic target compounds, a few applications on the bioanalysis of inorganic substances are also included.

The potential of electromembrane extraction for bioanalytical applications

Modern requirements in the field of bioanalysis often involve miniaturized, high-throughput sample preparation techniques that consume low amounts of both sample and potentially hazardous organic solvents. Electromembrane extraction is one technique that meets several of these requirements. In this principle analytes are selectively extracted from a biological matrix, through a supported liquid membrane and into an aqueous acceptor solution. The whole extraction process is facilitated by an electric field across the supported liquid membrane, which greatly reduces the extraction time. This review will give a thorough overview of recent advances in bioanalytical applications involving electromembrane extraction, and discuss both possibilities and challenges of the technique in a bioanalytical setting.

A high selective and sensitive method for the detection of six psychotropic drugs in human urine by high performance liquid chromatography combined with resonance Rayleigh scattering spectra

A highly selective and sensitive method of high performance liquid chromatography combined with resonance Rayleigh scattering spectra was developed for the detection of six psychotropic drugs: Doxepin, Promethazine, Imipramine, Amitriptyline, Chlorpromazine and Clomipramine.

Microextraction in urine samples for gas chromatography: a review

Since the complexity origin of biological samples, the research trends have been directed to the development of new miniaturized sample preparation techniques. This review provides a comprehensive survey of past and present microextraction methods followed by GC analysis for preconcentration and determination of various analytes in urine samples. These techniques have been classified in three general groups, including liquid-, solid- and membrane-based techniques. The principal of different microextraction methods that are located in each general group as well as their various extraction modes and the recent developments introduced for them has been presented. Subsequently, a comparison survey has been carried out among different microextraction techniques and finally a future perspective has been predicted based on the existing literature.

Electromembrane extraction--three-phase electrophoresis for future preparative applications

The purpose of this article is to discuss the principle and the future potential for electromembrane extraction (EME). EME was presented in 2006 as a totally new sample preparation technique for ionized target analytes, based on electrokinetic migration across a supported liquid membrane under the influence of an external electrical field. The principle of EME is presented, and typical performance data for EME are discussed. Most work with EME up to date has been performed with low-molecular weight pharmaceutical substances as model analytes, but the principles of EME should be developed in other directions in the future to fully explore the potential. Recent research in new directions is critically reviewed, with focus on extraction of different types of chemical and biochemical substances, new separation possibilities, new approaches, and challenges related to mass transfer and background current. The intention of this critical review is to give a flavor of EME and to stimulate into more research in the area of EME. Unlike other review articles, the current one is less comprehensive, but put more emphasis on new directions for EME.

Biological sample preparation: attempts on productivity increasing in bioanalysis

Sample preparation is an important step of any biomedical analysis. Development and validation of fast, reproducible and reliable sample preparation methods would be very helpful in increasing productivity. Except for a few direct injection methods, almost all biological samples should at least be diluted before any analysis. Sometimes dilution is not possible because of the low concentration of the target analyte in the sample, and alternative pretreatments, such as filtration, precipitation and sample clean up using different extraction methods, are needed. This review focuses on the recent achievements in the pretreatment of biological samples and investigates them in six categories (i.e., dilution, filtration/dialysis, precipitation, extraction [solid-phase extraction, liquid–liquid extraction], novel techniques [turbulent flow chromatography, immunoaffinity method, electromembrane extraction] and combined methods). Each category will be discussed according to its productivity rate and suitability for routine analysis, and the discussed methods will be compared according to the mentioned indices.

Electromembrane Surrounded Solid Phase Microextraction Followed by Injection Port Derivatization and Gas Chromatography-Flame Ionization Detector Analysis for Determination of Acidic Herbicides in Plant Tissue

Electromembrane surrounded solid phase microextraction (EM-SPME) of acidic herbicides was studied for the first time. In order to investigate the capability of this new microextraction technique to analyze acidic targets, chlorophenoxy acid (CPA) herbicides were quantified in plant tissue. 1-Octanol, was sustained in the pores of the wall of a hollow fiber and served as supported liquid membrane (SLM). Other EM-SPME related parameters, including extraction time, applied voltage, and pHs of the sample solution and the acceptor phase, were optimized using experimental design. A 20 min time frame was needed to reach the highest extraction efficiency of the analytes from a 24 mL alkaline sample solution across the organic liquid membrane and into the aqueous acceptor phase through a 50 V electrical field, and to their final adsorption on a carbonaceous anode. In addition to high sample cleanup, which made the proposed method appropriate for analysis of acidic compounds in a complicated media (plant tissue), 4.8% of 2-methyl-4-chlorophenoxyacetic acid (MCPA) and 0.6% of 2,4-dichlorophenoxyacetic acid (2,4-D) were adsorbed on the anode, resulting in suitable detection limits (less than 5 ng mL^-1), and admissible repeatability and reproducibility (intra- and interassay precision were in the ranges of 5.2-8.5% and 8.8-12.0%, respectively). Linearity of the method was scrutinized within the ranges of 1.0-500.0 and 10.0-500.0 ng mL^-1 for MCPA and 2,4-D, respectively, and coefficients of determination greater than 0.9958 were obtained. Optimal conditions of EM-SPME of the herbicides were employed for analysis of CPAs in whole wheat tissue.

Low voltage electrically stimulated lab-on-a-chip device followed by red-green-blue analysis: a simple and efficient design for complicated matrices

An electrical field-induced lab-on-a-chip design followed by RGB analysis is introduced to develop a portable device for analysis of Pb²⁺.