Removal of cadmium and lead ions from water by sulfonated magnetic nanoparticle adsorbents

Recent advances in environmentally benign hierarchical inorganic nano-adsorbents for the removal of poisonous metal ions in water: a review with mechanistic insight into toxicity and adsorption

Recent developments in nanoscience and technology have addressed many of the problems associated with water quality. Accordingly, using the technological outputs of the recent research on nanomaterials, the best solution for the purification of water is highlighted in this review. Herein, the main objective is to provide mechanistic insight into the synthesis of various inorganic nanoadsorbents and their adsorption chemistry for poisonous metal ions present in polluted water. Initially, the toxicity and carcinogenicity of As3+, Pb2+, Cr6+, Cd2+, and Hg2+ metal ions are highlighted. For the removal of these toxic ions, this review focuses on eco-friendly nanoadsorbents. The various preparation procedures utilized for the preparation of nanoadsorbents are briefly discussed. Generally, this is because of the adsorption capacity of nanoadsorbents depends on their morphology, shape, size, surface area, surface active sites, functional groups, and quantization effect. Also, due to the importance of their mechanism of action, the recent developments and challenges of novel nanoadsorbents such as metal oxides, core shell nanoparticles, magnetic nano ferrates, and functionalized core shell magnetic oxides and the processes for the treatment of water contaminated by toxic metal ions such as As3+, Pb2+, Cr6+, Cd2+, and Hg2+ are exclusively reviewed. Further, the adsorption efficiency of inorganic nanoadsorbents is also compared with that of activated carbon derived from various sources for all the above-mentioned metal ions.

Preparation of terpyridine-functionalized paramagnetic nickel-zinc ferrite microspheres for adsorbing Pb(ii), Hg(ii), and Cd(ii) from water

A paramagnetic microsphere combining special functional groups may be one kind of the most promising methods for heavy metal adsorption, due to their specific separation capacity, selectivity and reusability. In this study, a novel terpyridine-based magnetic solid-phase adsorbent (TPY-M) is successfully constructed. The paramagnetic Ni_0.25Zn_0.75Fe₂O₄ microsphere (M) is synthesized and applied as a magnetic core, and is functionalized by terpyridine (TPY) groups. The naked magnetic core and TPY-M are characterized by vibration sample magnetism (VSM), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and Fourier-transform infrared spectroscopy (FT-IR) techniques. Some parameters of the TPY-M samples are evaluated as potential adsorbents for heavy metal ions in various aqueous solutions. The adsorption capacities of TPY-M for Pb(ii), Hg(ii) and Cd(ii) were 64.75 mg g⁻¹, 33.94 mg g⁻¹ and 24.64 mg g⁻¹ under given conditions, respectively. In the case of Pb(ii), some influencing factors on the TPY-M adsorbent are investigated, including the pH, adsorption time, and ion concentrations. The adsorbent can be easily regenerated by HCl solution after use. The adsorbent revealed good adsorption performance in some real water samples.

A paramagnetic microsphere combining special functional groups may be one kind of the most promising methods for heavy metal adsorption, due to their specific separation capacity, selectivity and reusability.

Removal of cadmium(II) from aqueous solution by hydroxyapatite-encapsulated zinc ferrite (HAP/ZnFe2O4) nanocomposite: kinetics and isotherm study

In this study, HAP/ZnFe₂O₄ nanocomposite has been synthesized in two simple steps. The different characterization techniques confirm the fabrication of HAP/ZnFe₂O₄ magnetic binary nanocomposite. The composite was successfully applied as nanoadsorbent for the elimination of Cd(II) ions from its aqueous solution. The composite was able to remove 89.6% of Cd(II) ions under optimum experimental conditions. The equilibrium sorption data were very much in agreement with the Freundlich adsorption model, and the maximum sorption capacity was recorded to be 120.33 mg/g. Kinetic data of the cadmium ion removal was well concurrent with the pseudo-second-order kinetics rate model. This magnetic HAP/ZnFe₂O₄ nanocomposite can be applied as an environmentally friendly, low-cost, productive sorbent for the evacuation of Cd(II) ions from wastewater in light of its high sorption capacity.

Unified View of Magnetic Nanoparticle Separation under Magnetophoresis

The migration process of magnetic nanoparticles and colloids in solution under the influence of magnetic field gradients, which is also known as magnetophoresis, is an essential step in the separation technology used in various biomedical and engineering applications. Many works have demonstrated that in specific situations, separation can be performed easily with the weak magnetic field gradients created by permanent magnets, a process known as low-gradient magnetic separation (LGMS). Due to the level of complexity involved, it is not possible to understand the observed kinetics of LGMS within the classical view of magnetophoresis. Our experimental and theoretical investigations in the last years unravelled the existence of two novel physical effects that speed up the magnetophoresis kinetics and explain the observed feasibility of LGMS. Those two effects are (i) cooperative magnetophoresis (due to the cooperative motion of strongly interacting particles) and (ii) magnetophoresis-induced convection (fluid dynamics instability originating from inhomogeneous magnetic gradients). In this feature article, we present a unified view of magnetophoresis based on the extensive research done on these effects. We present the physical basis of each effect and also propose a classification of magnetophoresis into four distinct regimes. This classification is based on the range of values of two dimensionless quantities, namely, aggregation parameter N* and magnetic Grashof number Gr_m, which include all of the dependency of LGMS on various physical parameters (such as particle properties, thermodynamic parameters, fluid properties, and magnetic field properties). This analysis provides a holistic view of the classification of transport mechanisms in LGMS, which could be particularly useful in the design of magnetic separators for engineering applications.

Synthesis of diglycolic acid functionalized core-shell silica coated Fe3O4 nanomaterials for magnetic extraction of Pb(II) and Cr(VI) ions

Amine-terminated core-shell silica coated magnetite nanoparticles were functionalized with diglycolic acid for the first time to create acid moiety on the surface of the nanoparticles. The formation of magnetite nanoparticles was scrutinised through XRD, SEM, EDS, TEM, VSM and FTIR spectroscopy. The BET surface area of nano-sorbent was found to be 4.04 m2/g with pore size 23.68 nm. These nanomaterials were then utilized to remove the Pb(II) and Cr(VI) ions from their aqueous media and uptake of metal ions was determined by atomic absorption spectroscopy (AAS). A batch adsorption technique was applied to remove both ions at optimised pH and contact time with maximum adsorption efficiency for Pb(II) ions at pH 7 while for Cr(VI) ions at pH 3. Adsorption mechanism was studied using Langmuir and Freundlich isotherms and equilibrium data fitted well for both the isotherms, showing complex nature of adsorption comprising both chemisorption as well as physio-sorption phenomena. The nanosorbents exhibited facile separation by applying external magnetic field due to the ferrimagnetic behaviour with 31.65 emu/g saturation magnetization. These nanosorbents were also found to be used multiple times after regeneration.

Water-locking molecule-assisted fabrication of nature-inspired Mg(OH)2 for highly efficient and economical uranium capture

With the depletion of uranium terrestrial deposits, researchers have focused on the development of adsorbents to extract radioactive uranium from seawater/wastewater. However, the artificial manipulation of adsorbents for the cost-effective extraction of radioactive uranium from large numbers of water samples is still significantly challenging. Herein, a facile yet versatile stepwise strategy has been reported for the fabrication of adsorbents. Magnesium hydroxide (Mg(OH)2) was fabricated via the in situ conversion of a natural ore powder (magnesite), whose unique internal pore structure is highly suitable for the development of highly efficient sorbents. The coordination interaction of the synthesized adsorbent with uranium was enhanced by further introducing inexpensive molecules with water-locking properties, which resulted in superior extraction capacity and low production cost. After careful calculation, the cost per kilogram of the adsorbent was found to be about $0.21. The adsorption behaviors of the synthesized adsorbent CMC-PAM/Mg(OH)2 were investigated by batch adsorption, flow-through column adsorption (in laboratory), and field adsorption experiments in natural seawater and river. Representatively, CMC-PAM/Mg(OH)2 was exceptional in extracting uranium not only at high concentrations with sufficient capacities in a wide pH range (1584.67 mg g-1 and 454.55 mg g-1 at pH = 5 and pH = 8, respectively), but also in trace quantities including uranium in a flow-through column (55.68 mg g-1), natural seawater (8.6 mg g-1), and river (6.7 mg g-1). Inspired by this excellent performance, the effects of competitive ions on the selective adsorption of uranium by CMC-PAM/Mg(OH)2 in simulated wastewater and seawater environments were further studied. Using a combination of FTIR spectroscopic and XPS studies, it was revealed that the amine and hydroxyl groups enhanced the overall uranyl affinity of the CMC-PAM/Mg(OH)2 composite.

Experimental and Modeling Process Optimization of Lead Adsorption on Magnetite Nanoparticles via Isothermal, Kinetics, and Thermodynamic Studies

Lead has been a burgeoning environmental pollutant used in industrial sectors. Therefore, to emphasize the reactivity of lead toward magnetite nanoparticles for their removal, the present study was framed to analyze mechanisms involved in adsorption of lead. Batch adsorption studies have shown remarkable adsorption efficiency with only a 10 mg adsorbent dose used to extract 99% Pb2+ (110 mg L-1) within 40 min at pH 6. Isothermal, kinetic, and thermodynamic studies were conducted, and the equilibrium data was best fit for the Langmuir isotherm model with a maximum of 41.66 mg g-1 adsorption capacity at 328 K. Moreover, a pseudo second order was followed for adsorption kinetics and thermodynamic parameters such as Gibbs energy (ΔG°), enthalpy (ΔH°), and entropy (ΔS°) that were calculated and revealed the spontaneous, feasible, and exothermic nature of the process.

Preparation and application of magnetic biochar in water treatment: A critical review

In recent years, magnetic biochar has been widely used in removal of pollutants from water. In this paper, the preparation technologies of magnetic biochar are analyzed, and the performance and application of magnetic biochar in removal of inorganic pollutants such as heavy metals, and organic pollutants are investigated. Moreover, the adsorption behaviors, the key influencing factors and the adsorption mechanisms of magnetic biochars are summarized in this paper. Compared with common biochar, magnetic biochar is more effective in removal of water pollutants, including Cd(II), Pb(II), Zn(II), Cu(II), methylene blue, tetracycline, pesticide and phosphate. Langmuir and Freundlich models are adopted as the mainly adsorption isotherms, while pseudo-second-order model is employed as Kinetic model of heavy metal ions and organic contaminants in water. This study also investigates degradation of organic contaminants in water using magnetic biochar as catalyst. Results showed that encapsulated γ-Fe₂O₃ nanoparticles enhanced the catalytic ability of persulfate activator. Further researches on preparation and application of magnetic biochar in water treatment are prospected in this review.

Superparamagnetic nanosorbent for water purification: Assessment of the adsorptive removal of lead and methyl orange from aqueous solutions

The present study describes the preparation of 50.3 nm superparamagnetic nanosorbents with high surface area for the adsorptive removal of lead and methyl orange from water. This material is based on the surface modification of iron oxide superparamagnetic nanoparticles with a double-shell coating of mesoporous silica whose porosity was increased up to 570 m²/g by the addition of a porogenic material and its calcination. The adsorptive performance of the nanosorbent was evaluated as a function of several parameters (e.g. solution pH, pollutant initial concentration, and contact time), concluding that pHs around 5 are needed to avoid precipitation of Pb²⁺ as Pb(OH)₂ and the equilibrium adsorption capacity is reached after 2 h in all cases. The experimental data on the adsorption capacity of lead and methyl orange onto the nanosorbent were fit to a pseudo-second order kinetic model and Langmuir isotherm model. The maximum adsorption capacity value increases from 35 up to 50 mg/g_NS for lead removal with increasing nanosorbent surface area. Contrary, for methyl orange the maximum adsorption goes up to 240 mg/g_NS, indicating a larger nanosorbent surface affinity for the organic matter that is able to diffuse through the silica pores as probed by the intraparticle diffusion model. In addition, we found an good reusability (100% recovering after 4 sorption/desorption cycles for methyl orange removal), which makes of this magnetic nanosorbent suitable for remediation technologies.

Dual-emission carbon dots-stabilized copper nanoclusters for ratiometric and visual detection of Cr2O72- ions and Cd2+ ions

The pollution of heavy metal increases greatly accompanying by the development of industries. So, it is very important to build up a quick and reliable technique for detection of heavy metal ions. In this work, we developed a simple and convenient method for ratiometric and visual detection of Cr₂O₇^2- ions and Cd²⁺ ions. We utilized glutathione as raw material to prepare cyan-emitting carbon dots (GSH@CDs). The GSH@CDs were further used as the template to prepare carbon dots-stabilized copper nanoclusters (GSH@CDs-Cu NCs) that displayed two well-separated emission peaks respectively at 450 nm and 750 nm. The GSH@CDs-Cu NCs can be applied for the ratiometric and visual detection of Cr₂O₇^2- and Cd²⁺ ions based on the fluorescence quenching or enhancement of GSH@CDs-Cu NCs at 750 nm. A linear range of 2-40 μmol L^-1 with a detection limit of 0.9 μmol L^-1 for Cr₂O₇^2- ions, and a linear range of 0-20 μmol L^-1 with a detection limit of 0.6 μmol L^-1 for Cd²⁺ ions were achieved based on this method. The fluorescent test strips for Cr₂O₇^2- ions were successfully prepared based on GSH@CDs-Cu NCs. Moreover, the GSH@CDs-Cu NCs were successfully applied to determine Cr₂O₇^2- and Cd²⁺ ions in real samples with promising results.

Taguchi L16 optimization approach for simultaneous removal of Cs+ and Sr2+ ions by a novel scavenger

This study targeted to investigate the efficacy of a novel nano 2-naphtyl amine6:6-azulene sodium methanesulfonate di sulphonic acid-impregnated zeolite scavenger for simultaneous elimination of Cs⁺ and Sr²⁺ ions from binary aqueous systems. Fractal analysis is introduced to assign a fractal dimension and other fractal characteristics necessary for the surface characterization in terms of fractal dimension (D_s) and pre-exponential coefficient (C), which, in theory, are independent tool and sole for each surface. It is found that the D_s value of nano 2-naphtyl amine6:6-azulene sodium methanesulfonate di sulphonic acid-impregnated zeolite of type Y (NAASMS-ZY) is higher than that of nano 2-naphtyl amine6:6-azulene sodium methanesulfonate di sulphonic acid-impregnated zeolite of type X (NAASMS-ZX) and nano 2-naphtyl amine6:6-azulene sodium methanesulfonate di sulphonic acid-impregnated zeolite of type A (NAASMS-ZA) which accordingly, suggests the irregularity of NAASMS-ZY surface and thus demonstrates a large surface area. To increase the scavenge efficacy, effecting parameters on scavenge process were investigated and optimized via the use of adopting Taguchi L₁₆ design of experiments approach. It is found that, the initial metal ions concentration is the most powerful variable, and its value of contribution percentage is up to 33% and 31% for Cs⁺ and Sr²⁺, respectively. The kinetic curves and sorption isotherms at 298, 303 and 313 K were obtained, which well fitted to hyperbolic and Langmuir equations, respectively. Thermodynamic parameters demonstrated that the scavenge process was endothermic for both the concerned ions. Our results showed that the novel synthesized NAASMS-ZY is an effective nano-scavenger for cesium and strontium decontamination.

New effective 3-aminopropyltrimethoxysilane functionalized magnetic sporopollenin-based silica coated graphene oxide adsorbent for removal of Pb(II) from aqueous environment

A new effective adsorbent, 3-aminopropyltrimethoxysilane functionalized magnetic sporopollenin (MSp@SiO₂NH₂) based silica-coated graphene oxide (GO), (GO@SiO₂-MSp@SiO₂NH₂) was successfully synthesized and applied for the first time in the removal of hazardous Pb(II) ions from aqueous solution. The properties of the composite were characterized using Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX) and vibrating-sample magnetometery (VSM). Evaluation of GO@SiO₂-MSp@SiO₂NH₂ adsorption performance at optimum conditions revealed that the adsorbent has a maximum adsorption capacity of 323.5 mg/g for Pb(II) using 50-200 mg/L initial Pb(II) ions concentrations. Initial and final concentrations of Pb(II) ions in aqueous solution were analyzed using graphite furnace atomic absorption spectroscopy (GF-ASS). The adsorption behavior of Pb(II) ions onto GO@SiO₂-MSp@SiO₂NH₂ was studied using Langmuir, Freundlich and Temkin isotherms models. The values of coefficient of determination showed that the adsorption best fitted the Langmuir model (R² = 0.9994). Kinetic studies suggested that the adsorption of Pb(II) ion followed a pseudo-second-order rate model (R² = 1.00) and thermodynamic studies revealed that the adsorption process is endothermic and spontaneous. The effect of co-existing ions on Pb(II) ion adsorption were also studied and found to have considerable effects only at higher matrix concentration. The adsorbent can be reused up to ten times and retain its good adsorption capacity. In addition, GO@SiO₂-MSp@SiO₂NH₂ showed great potential for Pb(II)removal from industrial wastewater samples.

Hybrid silica aerogel nanocomposite adsorbents designed for Cd(II) removal from aqueous solution

Hybrid silica aerogel (HSA) nanoparticles were synthesized by sol-gel method and drying at ambient pressure. Also, two magnetic nanocomposites of HSA with Fe₃ O₄ nanoparticles and chitosan (CS) were prepared including HSA-Fe₃ O₄ and HSA-Fe₃ O₄ -CS. The morphology, structure, and magnetic properties of the HSA as well as its nanocomposites were analyzed by SEM, XRD, TGA, VSM, and ATR-FTIR techniques. The saturation magnetization (M_s ) values for the Fe₃ O₄ NPs, HSA-Fe₃ O_4, and HSA-Fe₃ O₄ -CS nanocomposite film were 69.93, 19.04, and 5.77 emu/g, respectively. Furthermore, the abilities of the HSA, HSA-Fe₃ O₄ , CS, and HSA-Fe₃ O₄ -CS adsorbents were assessed for removal of cadmium(II) heavy metal ions (100 ppm) from aqueous solution. All adsorbents removed/adsorbed the maximum Cd(II) ions in 120 min when adsorbent dosage = 20 mg and pH = 8. Moreover, the highest adsorption capacities were 58.5, 69.4, 65.8, and 71.9 mg/g for the HSA, CS, HSA-Fe₃ O_4, and HSA-Fe₃ O₄ -CS, respectively. Kinetic studies using all adsorbents verified that Cd(II) adsorption obeyed the second-order model illustrating the analyte chemisorption was happened on the adsorbent surfaces. All adsorption data were well consistent with the Langmuir isotherms. The reusability experiment confirmed that all of adsorbents could preserve >95% of their initial adsorption capacities even after five series of adsorption/desorption tests. PRACTITIONER POINTS: Hybrid silica aerogel (HSA), HSA-Fe₃ O_4, and HSA-Fe₃ O₄ -CS adsorbents were produced. Nanocomposites were characterized by XRD, TGA, SEM, VSM, and ATR-FTIR analysis. Adsorption of cadmium(II) ions by adsorbents was examined in aqueous solution. The highest adsorption capacity was obtained for the HSA-Fe₃ O₄ -CS (71.9 mg/g). Cd(II) adsorption followed second-order kinetics and Langmuir isotherm model.

β-Cyclodextrin-loaded minerals as novel sorbents for enhanced adsorption of Cd2+ and Pb2+ from aqueous solutions

The use of minerals to capture heavy metal pollution is limited by their capacity. Here, β-cyclodextrin (β-CD) with a good ability to capture heavy metals is loaded onto the surface of zeolite and vermiculite to adsorb lead and cadmium ions. Using epichlorohydrin (EPI) as a crosslinking agent, β-CD is loaded onto zeolite and vermiculite, as confirmed by a characterization analysis. Isothermal adsorption of Cd²⁺ and Pb²⁺ by the loaded minerals is tested at different concentrations, while contact time, pH, and kinetic and thermodynamic characteristics of the adsorption processes are analyzed. The amount of β-CD and crosslinker loaded onto a unit mass of zeolite is higher than that of vermiculite due to the unique porous structure of the zeolite surface. After β-CD loading, the adsorption saturation of zeolite for Cd²⁺ and Pb²⁺ are 93.06 and 175.25 mg/g, respectively. The adsorption saturation of Cd²⁺ and Pd²⁺ by β-CD-loaded vermiculite is 68.65 and 126.35 mg/g, respectively. The mechanism study revealed that the adsorption process of lead and cadmium ions by β-CD-loaded minerals was combined by diffusional movement with a chemical exchange of ionizable protons or cations, as well as by chemical bonding among heavy metal ions and functional groups (-OH, -COOH and CO).

A novel and biocompatible Fe3O4 loaded chitosan polyelectrolyte nanoparticles for the removal of Cd2+ ion

In this work, Fe₃O₄ loaded chitosan (CS) nanoparticles (NPs) and microparticles (MPs) were synthesized based on ionic gelation technology for the removal of Cd²⁺ ion. The influencing parameters including initial concentration, pH, contact time and recycling was evaluated and optimized. The results showed that particle size of Fe₃O₄ loaded CS NPs and MPs was in the range of 164.05-768.69 nm, and the former showed relatively higher adsorption capacities (97.86 mg/g) on Cd²⁺ ion than the latter after 90 min at pH 5.0 for the solutions with initial Cd²⁺ ion of 100 mg/L, respectively. Brunauer, Emmett and Teller (BET) test illustrated 61.48 m²/g of specific surface area, 0.0274 cm³/g of pore volume and 6.03 nm average pore size. The results of FT-IR, TEM, EDS and XRD indicated that Fe₃O₄ was well incorporated into CS NPs and MPs. Moreover, the adsorption equilibrium data fitted well with Langmuir isotherm model and adsorption process followed the pseudo-second-order model. The adsorption mechanisms could be well explained though coordination and electrostatic attraction. Findings of this work highlighted the potential using Fe₃O₄ loaded CS NPs as an effective and recyclable adsorbent for the removal of heavy metal ions in industrial wastewater treatment.

Sandwich membranes based on PVDF-g-4VP and surface modified graphene oxide for Cu(II) adsorption

UV photo-preactivation/thermally-induced grafting was employed for grafting 4-vinylpyridine (4-VP) on polyvinylidene fluoride (PVDF), and graphene oxide (GO) was modified with 4'-carboxy-2,2':6',2"-terpyridine (CTPy). Then sandwich PVDF-g-4VP/GO-CTPy/polytetrafluoroethylene (PTFE) membrane was fabricated for adsorption of Cu (II) as a model. The membrane formation, static adsorption thermodynamics, kinetics and dynamic adsorption/desorption were studied. The results showed that, the addition of polyethylene glycol (PEG 4000) as porogen can significantly increase the porosity and adsorption capacity of the membranes. The adsorption could be well described by the Langmuir model and pseudo-second-order kinetic model. The breakthrough volume and saturated volume increased with rising GO-CTPy contents. The adsorption capacity of sandwich membranes was much higher than that of mixed matrix membranes. The sandwich membrane also exhibited excellent reusability in dynamic adsorption/desorption cycles, demonstrating great potential in adsorption of trace Cu (II).

Biochar obtained from cinnamon and cannabis as effective adsorbents for removal of lead ions from water

The feedstock from cinnamon (CI) and cannabis (CA) were used for providing biochar at different temperatures using the pyrolysis method (300, 400, and 600 °C) as appropriate adsorbents for removing Pb(II) ions. The properties of materials were examined with varied techniques. The BET surface area of CI600 and CA600 was higher compared with others. The adsorption efficiency of Pb(II) ions relies on initial Pb(II) concentration, pH, adsorbent dose, equilibrium time, and temperature. The adsorption isotherms of Pb(II) ions were assessed via Langmuir adsorption isotherm and the pseudo-second-order model and electrostatic interaction became visible to play the main role in the adsorption process.

Recycling of neodymium enhanced by functionalized magnetic ferrite

This study systematically evaluates Neodymium (Nd) recovery from actual seawaters and wastewater using functionalized magnetic ferrite (3-mercaptopropionic acid-tetraethyl orthosilicate ferrite, MPA-TEOS-ferrite). The recovery of Nd by MPA-TEOS-ferrite displayed an L-shaped nonlinear isotherm, suggesting limiting binding sites on the adsorbent surface. At room temperature, a significant recovery of Nd by MPA-TEOS-ferrite increased from 8.99% to 99.99% with increasing pH (2.89-8.16) and an enhanced maxima Nd recovery capacity was observed on MPA-TEOS-ferrite (25.58 mg/g) when compared with pure ferrite (22.27 mg/g). The L3-edge X-ray absorption near-edge structure (XANES) spectra for the adsorbents collected after Nd recovery indicated that Nd(III) was still the predominant oxidation species on the surface of MPA-TEOS-ferrite. Only slightly change in the oxidation state or electronic structure around the Nd ions could be found during the adsorption process. Importantly, no significant change was found on Nd recovery while the NaCl ionic strength increased from 0.01 to 0.5 N. Furthermore, the results also displayed that the synthesized MPA-TEOS-ferrite has a great potential in efficient and rapid recovery of Nd from seawaters and wastewater.

Sorption and Desorption Studies of Pb(II) and Ni(II) from Aqueous Solutions by a New Composite Based on Alginate and Magadiite Materials

A new composite material based on alginate and magadiite/Di-(2-ethylhexyl) phosphoric acid (CAM-D2EHPA) was successfully prepared by previous impregnation of layered magadiite with D2EHPA extractant, and then immobilized into the alginate matrix. Air dried beads of CAM-D2EHPA were characterized by FTIR and SEM⁻EDX techniques. The sorbent was used for the separation of lead and nickel from nitrate solutions; the main parameters of sorption such as contact time, pH of the solution, and initial metal concentration were studied. The beads recovered 94% of Pb(II) and 65% of Ni(II) at pH 4 from dilute solutions containing 10 mg L-1 of metal (sorbent dosage, S.D. 1 g L-1). The equilibrium data gave a better fit using the Langmuir model, and kinetic profiles were fitted using a pseudo-second order rate equation. The maximum sorption capacities obtained (at pH 4) were 197 mg g-1 and 44 mg g-1 for lead and nickel, respectively. The regeneration of the sorbent was efficiently carried out with a dilute solution of HNO₃ (0.5 M). The composite material was reused in 10 sorption⁻elution cycles with no significant differences on sorption uptake. A study with synthetic effluents containing an equimolar concentration of both metals indicated a better selectivity towards lead ions.

Removal of Pb(II), Cd(II) and Hg(II) from aqueous solution by mercapto-modified coal gangue

A low-cost mercapto-modified coal gangue (CG-SH) was fabricated by modification of coal gangue (CG) with (3-mercaptopropyl) trimethoxysilane. The structure and composition for as-prepared CG-SH were characterized by using X-ray diffraction (XRD), Fourier transfer infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and X-ray fluorescence (XRF). Results indicated that larger amounts of mercapto-groups (-SH) was successfully introduced onto CG, which followed by acted as active sites for the removal of heavy metal cations, such as Pb(II), Cd(II) and Hg(II). The factors that affected the adsorption equilibrium as well as the removal efficiency, i.e., contact time, initial concentration, pH and temperature, were investigated in detail. The adsorption isotherms for Pb(II), Cd(II) and Hg(II) were well fitted with Langmuir model. The maximum adsorption capacity of CG-SH for Pb(II), Cd(II) and Hg(II) were calculated to be 332.8, 110.4 and 179.2 mg g^-1, respectively. The adsorption for Pb(II), Cd(II) and Hg(II) on CG-SH could be well described by pseudo-second-order kinetic model. And thermodynamic analysis suggests that the adsorption process for Pb(II) is exothermal, while that for Cd(II) and Hg(II) are endothermal. The results suggest CG-SH have great potential to be used as efficient absorbent for the removal of heavy metal cations from water.

A facile fabrication of sepiolite mineral nanofibers with excellent adsorption performance for Cd2+ ions

In this work, sepiolite mineral nanofibers are facilely prepared by a microwave-hydrogen peroxide method, and the bulk densities of the samples are adopted to evaluate the defibering effect.

Super rapid removal of copper, cadmium and lead ions from water by NTA-silica gel

A silica gel material modified with nitrilotriacetic acid (NTA-silica gel) was sensibly designed and prepared via a simple method for the super rapid removal of Cu²⁺, Cd²⁺ and Pb²⁺ from water.

Porous boron nitride nanoribbons with large width as superior adsorbents for rapid removal of cadmium and copper ions from water

Porous boron nitride nanoribbons with large width and their possible mechanism for the removal of heavy metals.

A novel natural chitosan/activated carbon/iron bio-nanocomposite: Sonochemical synthesis, characterization, and application for cadmium removal in batch and continuous adsorption process

The natural chitosan was synthesized using shrimp shells via sonochemical method, and activated carbon produced from grape stalks biomass. The novel bio-nanocomposite of chitosan/activated carbon/iron nanoparticles was synthesized via the sonochemical method and characterized using FTIR, SEM, and BET techniques. This bio-based nanocomposite was utilized to cadmium removal from dilute solution. The adsorption process via batch method was optimized, and the impacts of pH of feed, the dosage of adsorbent, and concentration of cadmium were analyzed. The kinetics and equilibrium analysis was done, and results indicate the predomination of chemical absorption and the single-layer adsorption process. Langmuir data indicates that the synthesized bio-nanocomposite can adsorb 344 mg cadmium per each gram. To evaluate the ability of the synthesized nanocomposite in the industrial application, the adsorption tests were done in a continuous adsorption system in three cycles.

Zn(II), Pb(II), and Cd(II) adsorption from aqueous solution by magnetic silica gel: preparation, characterization, and adsorption

A novel magnetic silica gel adsorbent (Fe₃O₄-Si-COOH) was successfully prepared by introducing carboxyl group in situ to improve the performance for Pb(II), Zn(II), and Cd(II) adsorption. Infrared spectroscopy (IR), scanning electron microscope (SEM), transmission electron microscope (TEM), thermo-gravimetric analyzer (TGA), the Brunauer-Emmett-Teller (BET) surface area, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) characterizations suggested that Fe₃O₄-Si-COOH has been successfully prepared. The adsorption performance was evaluated by batch experiments with different initial concentrations, ionic strength, contact time, and pH. The adsorption kinetics data followed pseudo-second-order model and exhibited a three-stage intraparticle diffusion mode. Isothermal adsorption equilibrium data were best fitted by the Freundlich model and the adsorption capacity were 155, 110, and 93 mg/g (initial concentration 210 mg/L) for Pb(II), Zn(II), and Cd(II), respectively. The result of X-ray photoelectron spectroscopy (XPS) survey spectrum suggested that the main adsorption mechanism is that the H⁺ of carboxyl groups exchanged with heavy metal ions in the adsorption processes. In addition, the adsorbed Fe₃O₄-Si-COOH could be regenerated and the adsorption capacity of reused Fe₃O₄-Si-COOH could maintain 80.3% after five cycles. Hence, the Fe₃O₄-Si-COOH could be a kind of potential material for removing Pb(II), Zn(II), and Cd(II) from wastewater. Graphical abstract.

Efficient removal of Cd2+ and Pb2+ from aqueous solution with amino- and thiol-functionalized activated carbon: Isotherm and kinetics modeling

In order to address the increasingly severe pollution issue caused by heavy metals, activated carbon-based absorbents have gained considerable attention. Herein, two novel adsorbents, amino-functionalized activated carbon (N-AC) and thiol-functionalized activated carbon (S-AC), were successfully synthesized by stepwise modification with tetraethylenepentamine (TEPA), cyanuric chloride (CC) and sodium sulfide. The pristine and synthesized materials were characterized by BET analysis, SEM, FTIR spectroscopy, elemental analysis and zeta-potential analyzer. Meanwhile, their adsorption properties for Cd²⁺ and Pb²⁺ and the effects of various variables on the adsorption processes were systematically investigated. The findings confirmed that amino-groups and thiol-groups endowed the AC with a strong affinity for metal ions and that the pH of solution affected the uptake efficiencies of the adsorbents by influencing their surface charges. Furthermore, six isotherm models (Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Sips and Redlich-Peterson) and four kinetic models (pseudo-first-order, pseudo-second-order, Intra-particle diffusion and Elovich) were applied to interpret the adsorption process at three different temperatures (288 K, 298 K and 308 K). The results indicated that temperature played an important role and that the rate-limiting step was chemosorption. A better fit for all adsorption systems was obtained with Langmuir model, with the maximum adsorption capacities at 298 K of 79.20 mg Cd²⁺/g and 142.03 mg Pb²⁺/g for N-AC, 130.05 mg Cd²⁺/g and 232.02 mg Pb²⁺/g for S-AC, respectively. Subsequently, the thermodynamic parameters revealed the nature of the adsorption was endothermic and spontaneous under the experimental condition. The possible adsorption procedures and the underlying mechanisms comprising physical and chemical interactions were proposed. Moreover, the as-synthesized adsorbents exhibited excellent regeneration performance after five adsorption/desorption cycles. The overall results demonstrated that both N-AC and S-AC could be the promising efficient candidates for removing Cd²⁺ and Pb²⁺ from contaminated water.

Sandwich-like Nanosystem for Simultaneous Removal of Cr(VI) and Cd(II) from Water and Soil

In this work, a novel nanosystem with a sandwich-like structure was synthesized via face-to-face combination of two pieces of waste cotton fabrics (CFs) carrying ferrous sulfide (FeS) and carboxyl-functionalized ferroferric oxide microsphere (CFFM), respectively, and the obtained nanosystem was named as FeS/CFFM/CF. Therein, FeS has high reduction and adsorption capabilities for hexavalent chromium (Cr(VI)), CFFM possesses a high adsorption ability on cadmium ion (Cd(II)) through electrostatic attraction and chelation, and CF displays high immobilization ability for FeS and CFFM and adsorption performance on Cd(II). FeS/CFFM/CF could simultaneously remove Cr(VI) and Cd(II) from water and inhibit the uptake of Cr and Cd by fish and water spinach, ensuring the food safety. Besides, this technology could efficiently control the migration of Cr(VI) and Cd(II) in the sand-soil mixture, which was favorable to prevent their wide diffusion. Importantly, FeS/CFFM/CF possessed a high flexibility and could be conveniently produced with needed scale and shape and easily separated from water and soil, displaying a promising approach to remediate Cr(VI)-/Cd(II)-contaminated water and soil and a huge application potential.

Synthesis of mesoporous silica-calcium phosphate hybrid nanoparticles and their potential as efficient adsorbent for cadmium ions removal from aqueous solution

Since adsorption and nanomaterials had been respectively found to be the most promising technique and the preferred adsorbents for heavy metal ions removal, in this study, novel mesoporous silica-calcium phosphate (MS-CP) hybrid nanoparticles were synthesized by a facile one-pot method, and subsequently assessed as adsorbent for Cd²⁺ removal from aqueous solution. MS-CP were characterized by scanning and transmission electron microscopies, etc. The influences of initial Cd²⁺ concentration, contact time, solution temperature and solution pH on removal efficiency of Cd²⁺ were investigated in detail. The results revealed that MS-CP were nanospheres of ∼20 nm and presented a bimodal pore distribution (3.82 nm and 12.40 nm), a high surface area (314.56 m²/g) and a large pore volume (1.21 cm³/g). The Cd²⁺ removal experiments demonstrated that MS-CP had a high adsorption capacity due to electrostatic interaction between Cd²⁺ and silanol groups on MS-CP surface, as well as ion-exchange between Cd²⁺ and calcium in MS-CP. Additionally, removal efficiency of Cd²⁺ increased with increasing contact time and solution temperature, while decreased as initial Cd²⁺ concentration increased. The maximum adsorption capacity of Cd²⁺ by MS-CP was above 153 mg/L. These results suggested that the as-synthesized MS-CP could be promising adsorbent for Cd²⁺ removal from aqueous solution.

Encapsulating Fe3O4 into calcium alginate coated chitosan hydrochloride hydrogel beads for removal of Cu (II) and U (VI) from aqueous solutions

The aim of this work was to study the removal of Cu (II) and U (VI) ions from aqueous solutions by encapsulating magnetic Fe₃O₄ nanoparticles into calcium alginate coated chitosan hydrochloride (CCM) hydrogel beads. ATR-FTIR and XRD analysis data indicated that the CCM composites were successfully prepared. SEM images and EDX spectra showed that Cu²⁺ and UO₂²⁺ ions were adhered onto sorbents. Adsorption properties for removal of both copper and uranium ions under various experimental conditions were investigated. Kinetic data and sorption equilibrium isotherms were also conducted in batch process. The sorption kinetic analysis revealed that sorption of Cu (II) and U (VI) followed the pseudo-second-order model well and exhibited 3-stage intraparticle diffusion model during the whole sorption process. Equilibrium data were best described by Langmuir model, and the CCM composite hydrogel beads showed the estimated maximum adsorption capacity 143.276mg/g and 392.692mg/g for Cu (II) and U (VI), respectively. The CCM adsorbent exhibited excellent reusability for five cycles use without significant changes in the adsorption capacity and structural stability. The results demonstrated that CCM can be an effective and promising sorbent for Cu (II) and U (VI) ions in wastewater.

Low-Field Dynamic Magnetic Separation by Self-Fabricated Magnetic Meshes for Efficient Heavy Metal Removal

Wastewater contaminated with heavy metals is a worldwide concern due to the toxicity to human and animals. The current study presents an incorporation of adsorption and low-field dynamic magnetic separation technique for the treatment of heavy-metal-contaminated water. The key components are the eco-fabricated magnetic filter with mesh architectures (constituted of a soft magnetic material (Ni,Zn)Fe₂O₄) and poly(acrylic acid) (PAA)-coated quasi-superparamagnetic Fe₃O₄ nanoparticles (NPs). PAA-coated Fe₃O₄ NPs possess high adsorption capacity of heavy metal ions including Pb, Ni, Co, and Cu and can be easily regenerated after the adjustment of pH. Moreover, magnetic mesh filter has shown excellent collection ability of quasi-superparamagnetic particles under a magnetic field as low as 0.7 kOe (0.07 T) and can easily release these particles during ultrasonic washing when small magnets are removed. In the end, after one filtration process, the heavy metal concentration can be significantly decreased from 1.0 mg L^-1 to below the drinking water standard recommended by the World Health Organization (e.g., less than 0.01 mg L^-1 for Pb). Overall, a proof-of-concept adsorption and subsequent low-field dynamic separation technique is demonstrated as an economical and efficient route for heavy metal removal from wastewater.

Synthesis of magnetic graphene oxide grafted polymaleicamide dendrimer nanohybrids for adsorption of Pb(II) in aqueous solution

In this paper, using maleic anhydride and ethylenediamine as functional monomers, graphene oxide (GO) loaded magnetic Fe₃O₄ nanoparticles modified by (3-Aminopropyl) triethoxysilane as support, magnetic graphene oxide grafted polymaleicamide dendrimer (GO/Fe₃O₄-g-PMAAM) nanohybrids were fabricated by divergent method and magnetic separation technology. The obtained samples were characterized by transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, elementary analyzer and vibrating sample magnetometer. The effects of PMAAM generations, solution pH, Pb(II) initial concentration, temperature and contact time on the adsorption property of the samples for Pb(II) in aqueous solution were studied. The results demonstrated that nitrogen content and adsorption capacity of the as-synthesized samples with amino terminal groups were all higher than their adjacent generations PMAAM with carboxyl terminal groups. Moreover, with increasing generations of PMAAM grafted on to the GO/Fe₃O₄, the nitrogen content and the adsorption capacity of the samples with the same terminal groups gradually increased. The maximum adsorption capacity of GO/Fe₃O₄-g-G3.0 for Pb(II) was 181.4mgg^-1 at 298K. The rising of temperature was beneficial for the adsorption. The adsorption kinetics had a better agreement with pseudo-second-order equation, and equilibrium data followed the Langmuir model.

Bio-adsorbent derived from papaya peel waste and magnetic nanoparticles fabricated for lead determination

Determination of toxic lead ions at trace level using solid-based adsorbents has become of interest in recent years. In this work, a novel bio-adsorbent originating from papaya peel waste (PPw) and magnetic nanoparticles (Fe3O4) was developed (Fe3O4/PPw). The new adsorbent was prepared using a one-pot green method and characterized by Fourier transform infrared, X-ray diffractometer, energy-dispersive X-ray spectroscopy and field emission scanning electron microscopy. The synthesized Fe3O4/PPw was used as a magnetic solid-phase extraction (MSPE) sorbent for extraction of lead ions from waste water prior to assessing by flame atomic absorption spectroscopy. The parameters influencing extraction recovery, including desorption solvent, solvent volume, sample volume, extraction time, desorption time, adsorbent dosage, salt effect and pH were optimized. A linear response for the MSPE method was achieved at concentrations from 10 to 100 ng mL−1 with a good coefficient of determination (R 2=0.9987). Detection limits and quantitation limit of the MSPE method were observed around 2 ng mL−1 and 6.6 ng mL−1, respectively. The intraday and interday precision (%RSD) was in the range 1.6%–4.5% and 2.3%–7.4%, respectively. The recovery amounts obtained were 91% for tap water, 85.9% for river water and 86% for waste water. The synthesized adsorbent showed a minimum reusability of eight cycles without significant change in the lead determination. The results proved that the new bio-adsorbent (Fe3O4/PPw) is potentially capable to extract the Pb(II) from aqueous media under optimum conditions with a high extraction efficiency.