Residual efficiency of iron-nanoparticles and different iron sources on growth, and antioxidants in maize plants under salts stress: life cycle study

Exogenous application of iron (Fe) may alleviate salinity stress in plants growing in saline soils. This comparative study evaluated the comparative residual effects of iron nanoparticles (FNp) with two other Fe sources including iron-sulphate (FS) and iron-chelate (FC) on maize (Zea mays L.) crop grown under salt stress. All three Fe sources were applied at the rate of 15 and 25 mg/kg of soil before the sowing of wheat (an earlier crop; following the sequence of crop rotation) and no further Fe amendments were added later for the maize crop. Results revealed that FNp application at 25 mg/kg (FNp-2) substantially increased maize height, root length, root dry weight, shoot dry weight, and grain weightby 80.7%, 111.1%, 45.7%, 59.5%, and 77.2% respectively, as compared to the normal controls; and 62.6%, 81.3%, 65.1%, 78%, and 61.2% as compared to salt-stressed controls, respectively. The FNp-2 treatment gave higher activities of antioxidant enzymes, such as superoxide dismutase, peroxidase, catalase, and ascorbate peroxidase compared to salt stressed control (50.6%, 51%, 48.5%, and 49.2%, respectively). The FNp-2 treatment also produced more photosynthetic pigments and better physiological markers: higher chlorophyll a contents by 49.9%, chlorophyll b contents by 67.2%, carotenoids by 62.5%, total chlorophyll contents by 50.3%, membrane stability index by 59.1%, leaf water relative contents by 60.3% as compared to salt stressed control. The highest Fe and Zn concentrations in maize roots, shoots, and grains were observed in FNp treatment as compared to salts stressed control. Higher application rates of Fe from all the sources also delivered better outcomes in alleviating salinity stress in maize compared to their respective low application rates. The study demonstrated that FNp application alleviated salinity stress, increased nutrient uptake and enhanced the yield of maize grown on saline soils.

Investigating the effectiveness of iron nanoparticles synthesized by green synthesis method in chemoradiotherapy of colon cancer

Current methods of colon cancer treatment, especially chemotherapy, require new treatment methods due to adverse side effects. One important area of interest in recent years is the use of nanoparticles as drug delivery vehicles since several studies have revealed that they can improve the target specificity of the treatment thus lowering the dosage of the drugs while preserving the effectiveness of the treatment thus reducing the side effects. The use of traditional medicine has also been a favorite topic of interest in recent years in medical research, especially cancer research. In this research work, the green synthesis of Fe nanoparticles was carried out using Mentha spicata extract and the synthesized nanoparticles were identified using FT-IR, XRD, FE-SEM and EDS techniques. Then the effect of Mentha spicata, Fe nanoparticles, and Mentha spicata -loaded Fe nanoparticles on LS174t colon cancer cells, and our result concluded that all three, especially Mentha spicata -loaded Fe nanoparticles, have great cytotoxic effects against LS174t cells, and exposure to radiotherapy just further intensified these results. The in vitro condition revealed alterations in the expression of pro-apoptotic BAX and anti-apoptotic Bcl2, suggesting a pro-apoptotic effect from all three components, particularly the Mentha spicata-loaded Fe nanoparticles. After further clinical trials, these nanoparticles can be used to treat colon cancer.

Optimizing soil tetrabromobisphenol A remediation through iron-based activation of persulfate: A comparative analysis of homogeneous and heterogeneous systems

Tetrabromobisphenol A (TBBPA) that widely exists in soil and poses a potential threat to ecological environment urgently needs economically efficient remediation techniques. This study utilized both homogeneous Fe2⁺ solution and heterogeneous iron-based nanomaterials (chemically synthesized nano zero-valence iron (nZVI) and green-synthesized iron nanoparticles (G-Fe NPs)) to activate persulfate (PS) and assess their efficacy in degrading TBBPA in soil. The results demonstrate the superior performance of heterogeneous catalytic systems (WG-Fe NPs/PS (82.07%) and WnZVI/PS (78.32%)) over homogeneous catalytic system (WFe2+/PS (71.69%)), In addition, G-Fe NPs and nZVI effectively controlled the slow release of Fe2+. The optimization analysis using response surface methodology (RSM) reveal the remarkable significance of the experimental model based on the box-behnken design. RSM show that G-Fe NPs/PS exhibited optimal process parameters and predicted the maximum soil TBBPA degradation efficiency reaching 98.77%. The results of density functional theory calculations suggest that C-Br are the primary targets for electrophilic substitution reactions. Based on the f0 value and △G, the degradation pathway of TBBPA is inferred to involve a sequential debromination process, followed by the cleavage of intermediate carbon-carbon bonds and subsequent oxidation reactions. Hence, G-Fe NPs/PS not only facilitate waste resource utilization but also hold significant application potential.

Green synthesis of iron nanoparticles: Sources and multifarious biotechnological applications

Green synthesis of iron nanoparticles is a highly fascinating research area and has gained importance due to reliable, sustainable and ecofriendly protocol for synthesizing nanoparticles, along with the easy availability of plant materials and their pharmacological significance. As an alternate to physical and chemical synthesis, the biological materials, like microorganisms and plants are considered to be less costly and environment-friendly. Iron nanoparticles with diverse morphology and size have been synthesized using biological extracts. Microbial (bacteria, fungi, algae etc.) and plant extracts have been employed in green synthesis of iron nanoparticles due to the presence of various metabolites and biomolecules. Physical and biochemical properties of biologically synthesized iron nanoparticles are superior to that are synthesized using physical and chemical agents. Iron nanoparticles have magnetic property with thermal and electrical conductivity. Iron nanoparticles below a certain size (generally 10-20 nm), can exhibit a unique form of magnetism called superparamagnetism. They are non-toxic and highly dispersible with targeted delivery, which are suitable for efficient drug delivery to the target. Green synthesized iron nanoparticles have been explored for multifarious biotechnological applications. These iron nanoparticles exhibited antimicrobial and anticancerous properties. Iron nanoparticles adversely affect the cell viability, division and metabolic activity. Iron nanoparticles have been used in the purification and immobilization of various enzymes/proteins. Iron nanoparticles have shown potential in bioremediation of various organic and inorganic pollutants. This review describes various biological sources used in the green synthesis of iron nanoparticles and their potential applications in biotechnology, diagnostics and mitigation of environmental pollutants.

Effects of zero-valent iron and magnetite on ethanol and lactic acid production in the anaerobic fermentation of food waste

With the increasing global concern about food waste management, finding efficient ways to convert it into valuable products is crucial. The addition of zero-valent iron and magnetite to enhance ethanol and lactic acid fermentation yields from food waste emerges as a potential solution. This study compared the effects of 50-nm and 500-nm particle sizes of zero-valent iron and magnetite on ethanol and lactic acid fermentation and analyzed the mechanism of action from the perspective of organic matter material transformation and microbiology. The experimental results showed that 500-nm particle size magnetite and zero-valent iron could promote the hydrolysis of polysaccharides and proteins. 500-nm particle size magnetite could increase ethanol production (1.4-fold of the control), while 500-nm particle size zero-valent iron could increase lactic acid production (2.8-fold of the control). Metagenomic analysis showed that 500-nm magnetite increased the abundance of genes for amino acid metabolic functions, while 500-nm zero-valent iron increased the abundance of glycoside hydrolase genes (1.3-fold of the control). It's worth noting that while these findings are promising, they are based on controlled experimental conditions, and real-world applications may vary. his research not only offers a novel approach to augmenting anaerobic fermentation yields but also contributes to sustainable food waste management practices, potentially reducing environmental impacts and creating valuable products.

Evaluating the hepatotoxic versus the nephrotoxic role of iron oxide nanoparticles: One step forward into the dose-dependent oxidative effects

The present study has been designed to detect the dose-dependent effect of iron oxide nanoparticles (IONPs) on the liver and kidney of rats by evaluating three different doses 30, 300, 1000 mg/kg/day IONPs for 28 days. Forty rats were divided into four groups; I (control), II (low dose), III (medium dose) and IV (high dose). There also was a statistically-significant elevation in the serum levels of hepatic enzymes; AST and ALT in medium & high dose. The elevation of serum ALP, on the other hand, was significant in all IONPs doses. There was significant elevation in the levels of urea creatinine, and MDA in the medium and high doses of IONPs. The activity of superoxide dismutase (SOD) and glutathione peroxidase (GPx) showed significant decrease in the high dose only compared to the control group. The serum iron levels increased in a dose-dependent manner in the IONPs-treated groups with highly significant increase in the moderate and high dose groups. On comparing the effect of different doses of IONPs between the liver and kidney, the high dose revealed statistically significant difference (p < 0.05) in the area percent of collagen deposition (54.4 ± 3.9 versus 6.1 ± 2.6) and alpha smooth muscle actin (α-SMA) reaction (7.7 ± 1.5 versus 17.8 ± 4.3) in the liver relative to the kidney. The medium and high doses revealed statistically significant difference in optical density of Periodic acid Schiff (PAS) reaction (45 ± 3.4 versus 50.3 ± 1.8 in the medium dose, and 38.9 ± 6 versus 63 ± 3 in the high dose) and area percent of inducible nitric oxide synthase (iNOS) reaction (12.98 ± 2.7 versus 3.5 ± 0.5 in the medium dose, and 27.91 ± 1.5 versus 7.7 ± 0.6 in the high dose) in the liver relative to the kidney.

Improved recovery selectivity of rare earth elements from mining wastewater utilizing phytosynthesized iron nanoparticles

While rare earth elements (REEs) play key roles in many modern technologies, the selectivity of recovering of REEs from mining wastewater remains a critical problem. In this study, iron nanoparticles (FeNPs) synthesized from euphorbia cochinchinensis extracts were successfully used for selective recovery of REEs from real mining wastewater with removal efficiencies of 89.4% for Y(III), 79.8% for Ce(III) and only 6.15% for Zn(Ⅱ). FTIR and XPS analysis suggested that the high selective removal efficiency of Y(III) and Ce(III) relative to Zn(Ⅱ) on FeNPs was due to a combination of selective REEs adsorption via complexing with O or N, ion exchange with H+ present in functional groups contained within the capping layer and electrostatic interactions. Adsorptions of Y(III) and Ce(III) on FeNPs conformed to pseudo second-order kinetics and the Langmuir isotherm model with maximum adsorption capacities of 5.10 and 0.695 mg∙g-1, respectively. The desorption efficiencies of Y(III) and Ce(III) were, respectively, 95.0 and 97.9% in 0.05 M acetic acid, where desorption involved competitive ion exchange between Y(III), Ce(III) and Zn(Ⅱ) with H+ contained in acetic acid and intraparticle diffusion. After four consecutive adsorption-desorption cycles, adsorption efficiencies for Y(III) and Ce(III) remained relatively high at 52.7% and 50.1%, respectively, while desorption efficiencies of Y(III) and Ce(III) were > 80.0% and 95.0%, respectively. Overall, excellent reusability suggests that FeNPs can practically serve as a potential high-quality selectivity material for recovering REEs from mining wastewaters.

Ultrastructural characteristics of the accumulation of iron nanoparticles in the intestine of Cyprinus carpio (Linnaeus, 1758) under aquaculture

During the development of nanotechnology, the production of many substances containing nanoparticles leads to the release of various nanoparticles into the environment, including the water ecosystem. The main goal of the current research was to study the ultrastructural characteristics of the entry and bioaccumulation of Fe3O4 nanoparticles in the small intestine of Cyprinus carpio (Linnaeus, 1758), as well as the pathomorphological changes in the fish organism. Two different doses (10 and 100 mg) of Fe3O4 nanoparticles were fed to fingerlings for 7 days and then intestinal samples were taken and studied. It was found that the extent of damages was boosted within the increment of nanoparticle concentration. The sequence and bioaccumulation of Fe3O4 nanoparticles in the small intestine of fish occurred as below: firstly, the nanoparticles passed into microvilli located in the apical part of enterocytes in the mucosa layer, from there into the cytoplasm of the epithelial cells, including cytoplasmatic organelles (nucleus, mitochondria, lysosomes, fat granules), and then into a lamina propria of the mucosa of the small intestine and passed into the endothelium of the blood vessels and to the erythrocytes of the vessels which located in the lumen. It was determined that although the nanoparticles were up to 30 nm in size, only particles with a maximum size of 20 nm could penetrate the intestinal wall. Thus, the release of Fe3O4 nanoparticles into the environment in high doses has a negative effect on the living ecosystem, including the body of fish living in the water.

Larvicidal activity of green synthesized iron oxide nanoparticles using Grevillea robusta Cunn. leaf extract against vector mosquitoes and their characterization

Extensive fumigation of synthetic pesticides to control the mosquito vector during each post-monsoon season in Pakistan significantly enhanced the environmental contamination and extinction of beneficial insects from the urban ecosystems. In this context, the present study examined the larvicidal efficacy of green synthesized iron nanoparticles (IONPs), using an aqueous leaf extract of Grevillea robusta against the early 2nd and 4th instar larvae of Aedes aegypti and Anopheles stephensi in Pakistan. The prepared IONPs were characterized by UV-Vis spectrum, FTIR, X-ray diffraction, scanning electron microscopy, and energy-dispersive diffraction. Larvicidal bioassay was conducted at various concentrations (80, 160, 240, 320, and 400 ppm) of IONPs prepared from leaf extract of G. robusta, and readings were taken-every 12 h for two consecutive days. In vitro, larvicidal assay, G. robusta leaf extract IONPs exhibited high mortalities of 64-96% (LC50 = 259.07 ppm; LC90 = 443.92 ppm) for the second instar and 65-98% (LC50 = 238.05 ppm; LC90 = 433.93 ppm) for the fourth instar of Ae. aegypti, while in the case of An. stephensi 56-84% (LC50 = 297.96 ppm; LC90 = 528.69 ppm) for the second and 56-88% (LC50 = 292.72 ppm; LC90 = 514.00 ppm) mortality for fourth larvae at 12-48 h post-exposure times were observed respectively. Significant (p < 0.05) dose-dependent and exposure time-dependent trends were observed among the 2nd and 4th larvalinstar of An. stephensi and Ae. aegypti. However, both species showed similar response and observed no significant (p > 0.05) difference in percentage mortality between the vector mosquitoes An. stephensi and Ae. aegypti. Overall, this study demonstrates that the larvicidal efficacy of green synthesized IONPs at low concentrations can be an ideal eco-friendly and cost-effective biocontrol of vector mosquitoes' larvae of An. stephensi and Ae. aegypti.

Dextran-coated iron oxide nanoparticles in combination with ginger extract without NGF promote neurite outgrowth and PC12 cell branching

Neurogenesis is decreased in the absence of nerve growth factor (NGF). It would be beneficial to discover substances that stimulate neurogenesis without NGF, given the high molecular weight and brief half-life of NGF. This work aims to assess the neurogenesis of ginger extract (GE) combined with superparamagnetic iron oxide nanoparticles (SPIONs) without NGF. Based on our research, GE and SPIONs start neurogenesis before NGF. In comparison to the control group, GE and SPIONs dramatically reduced the length and quantity of neurites, according to statistical analysis. Our findings also indicated that SPIONs and ginger extract together had an additive impact on one another. The total number significantly increased with the addition of GE and nanoparticles. In comparison to NGF, the mixture of GE and nanoparticles significantly enhanced the total number of cells with neurites (by about 1.2-fold), the number of branching points (by about 1.8-fold), and the length of neurites. The difference between ginger extract and nanoparticles with NGF was significant (about 3.5-fold), particularly in the case of cells with one neurite. The results of this study point to the possibility of treating neurodegenerative disorders via the combination of GE and SPIONs without NGF.

Simultaneous addition of CO2-nanobubble water and iron nanoparticles to enhance methane production from anaerobic digestion of corn straw

In this research, CO₂-nanobubble water (CO₂-NBW) and iron nanoparticles (Fe⁰NPs) were added simultaneously to exploit individual advantages to enhance the methanogenesis process from both the stability of anaerobic digestion (AD) system and the activity of anaerobic microorganism aspects. Results showed that the AD performance was enhanced by supplementing with CO₂-NBW or Fe⁰NPs individually, and could be further improved by simultaneous addition of the two additives. The maximum methane yield was achieved in the CO₂-NBW + Fe⁰NPs reactor (141.99 mL/g-VS_added), which increased by 26.16% compared to the control group. Similarly, the activities of the electron transfer system (ETS) and enzyme were improved. The results of microbial community structure revealed that the addition of CO₂-NBW and Fe⁰NPs could improve the abundance of dominant bacteria (Anaerolineaceae, Bacteroidales, and Prolixibacteraceae) and archaea (Methanotrichaceae and Methanospirillaceae). Additionally, the functional metabolic prediction heatmap indicated that metabolic functional genes favorable for AD of corn straw were enhanced.

Preparation and evaluation of celite decorated iron nanoparticles for the sequestration performance of hexavalent chromium from aqueous solution

The increasing usage of an important heavy metal chromium for industrial purposes, such as metallurgy, electroplating, leather tanning, and other fields, has contributed to an augmented level of hexavalent chromium (Cr(VI)) in watercourses negatively impacting the ecosystems and significantly making Cr(VI) pollution a serious environmental issue. In this regard, iron nanoparticles exhibited great reactivity in remediation of Cr(VI)-polluted waters and soils, but, the persistence and dispersion of the raw iron should be improved. Herein, this article utilized an environment-friendly celite as a modifying reagent and described the preparation of a novel composites namaly celite decorated iron nanoparticles (C-Fe⁰) and evaluation of C-Fe⁰ for the sequestration performance of Cr(VI) from aqueous solution. The results indicated that initial Cr(VI) concentration, adsorbent dosage, and especially solution pH are all critical factors to control C-Fe⁰ performance in Cr(VI) sequestration. We demonstrated that C-Fe⁰ could achieve a high Cr(VI) sequestration efficiency with an optimized adsorbent dosage. Fitness of the pseudo-second-order kinetics model with data indicated that adsorption was the rate-controlling step and chemical interaction controlled Cr(VI) sequestration on C-Fe⁰. The adsorption isotherm of Cr(VI) could be the best depicted by Langmuir model with a monolayer adsorption. The underlying sequestration path of Cr(VI) by C-Fe⁰ was then put forward, and the combined effect of adsorption and reduction implied the potentials of C-Fe⁰ in Cr(VI) removal.

Original nanostructured bacterial cellulose/pyrite composite: Photocatalytic application in advanced oxidation processes

The development of an original catalytic composite of bacterial cellulose (BC) and pyrite (FeS₂) for environmental application was the objective of this study. Nanoparticles of the FeS₂ were synthesized from the hydrothermal method and immobilized on the BC structure using ex situ methodology. In the BC, the FTIR and XRD analyzes showed the absorption band associated with the Fe-S bond and crystalline peaks attributed to the pyrite. Thus, the immobilization of the iron particles on the biopolymer was proven, producing the composite BC/FeS₂. The use of the SEM technique also ratifies the composite production by identifying the fibrillar structure morphology of the cellulose covered by FeS₂ particles. The total iron concentration was 54.76 ± 1.69 mg L^-1, determined by flame atomic absorption analysis. TG analysis and degradation tests showed respectively the thermal stability of the new material and its high catalytic potential. A multi-component solution of textile dyes was used as the matrix to be treated via advanced oxidative processes. The composite acted as the catalyst for the Fenton and photo-Fenton processes, with degradations of 52.87 and 96.82%, respectively. The material proved stability by showing low iron leaching (2.02 ± 0.09 and 2.11 ± 0.11 mg L^-1 for the respective processes). Thus, its high potential for reuse is presumed, given the remaining concentration of this metal in the BC. The results showed that the BC/FeS₂ composite is suitable to solve the problems associated with using catalysts in suspension form.

Multi-round recycling of green waste for the production of iron nanoparticles: synthesis, characterization, and prospects in remediation

Due to the widespread applications of metal nanoparticles (NPs), green synthesis strategies have recently advanced, e.g., methods that utilize extracts made from different plant wastes. A particularly innovative approach to reducing large amounts of available household/agricultural green wastes is their application in nanoparticle generation. Regarding this, the aim of our work was to examine the possibility of upgrading green nanoparticle syntheses from an innovative economic and environmental point of view, namely by investigating the multiple recyclabilities of green tea (GT), coffee arabica (CA), and Virginia creeper (Parthenocissus quinquefolia) (VC) waste residues for iron nanoparticle (FeNPs) synthesis. The plant extracts obtained by each extraction round were analyzed individually to determine the amount of main components anticipated to be involved in NPs synthesis. The synthesized FeNPs were characterized by X-ray powder diffraction and transmission electron microscopy. The activity of the generated FeNPs in degrading chlorinated volatile organic compounds (VOC) and thus their future applicability for remediation purposes were also assessed. We have found that VC and especially GT residues could be reutilized in multiple extraction rounds; however, only the first extract of CA was suitable for FeNPs' generation. All of the obtained FeNPs could degrade VOC with efficiencies GT1-Fe 91.0%, GT2-Fe 83.2%, GT3-Fe 68.5%; CA1-Fe 76.2%; VC1-Fe 88.2%, VC2-Fe 79.7%, respectively, where the number (as in GT3) marked the extraction round. These results indicate that the adequately selected green waste material can be reutilized in multiple rounds for nanoparticle synthesis, thus offering a clean, sustainable, straightforward alternative to chemical methods.

Nano-decolorization of methylene blue by Phyllanthus reticulatus iron nanoparticles: an eco-friendly synthesis and its antimicrobial, phytotoxicity study

The present study was investigated to synthesis the iron nanoparticles (FeNPs) using the leaf extract of Phyllanthus reticulatus. The phytosynthesized FeNPs exhibited UV-visible absorption peaks at 229 nm and its crystalline nature was confirmed through XRD. FT-IR analysis revealed the presence of various functional groups which are responsible for the bioreduction of FeNPs. The SEM results showed that FeNPs were aggregated, irregular sphere shaped with rough surfaces and EDX spectrum recorded densely occupied iron nanoparticles region. The particle size range of the synthesized iron nanoparticles was 185.6 nm. The FeNPs showed potential methylene blue decolourisation activity which was visually observed by gradual colour change in the dye solution from deep blue to colorless. The control exhibited no change in coloration during exposure to sunlight and the iron nanoparticles completely disintegrated the methylene blue within 10 s in 10 mg/L methylene blue (98%), whereas the color change was decreased when the concentration of the dye increased. In addition, the phyto-synthesized FeNPs exhibited extensive antibacterial and antifungal activity against the selected pathogens. Phytotoxicity assay confirms the potential of biosynthesized iron nanoparticles as a fertilizer for the growth of green gram seeds. Thus the present study leads to development of cost-effective green synthesis, reduction of toxic chemicals and its extensive applications in the biological sciences.

Production of microalgal-based carbon encapsulated iron nanoparticles (ME-nFe) to remove heavy metals in wastewater

The integration of microalgae-bacteria consortia within existing wastewater treatment plants as alternative biological treatment could be an interesting option to improve the sustainability of these facilities. However, the fate of the produced biomass is decisive to make that option economically attractive. The present study aimed to valorize the microalgae grown at a pilot scale and used for the treatment of the centrate from municipal sewage sludge, producing microalgal-based iron nanoparticles (ME-nFe), by hydrothermal carbonization. The final product had high carbon content, strong sorbent power, and reducing properties, due to the presence of zerovalent iron. Different synthesis conditions were tested, comparing iron (III) nitrate nonahydrate (Fe (NO₃)₃·9H₂O) and ammonium iron (III) sulfate dodecahydrate (NH₄ Fe (SO₄)₂·12 H₂O) as iron sources, four different Fe/C molar ratios (0.02, 0.05, 0.1, 0.2), and three process temperatures (180, 200, 225 °C). Based on the characterization of all the prototypes, the best one (having a specific area of 110 m²g^-1) was chosen and tested for the removal of selected heavy metals by Jar tests. The removal of copper, zinc, cadmium, and nickel from the treated effluent from the wastewater treatment plant was 99.6%, 97.8%, 96.4%, and 80.3%, respectively, also for very low starting concentrations (1 mg L^-1). The removal of total chromium, on the contrary, was only 12.4%. Thanks to the magnetic properties, the same batch of ME-nFe was recovered and used effectively for three consecutive Jar tests.

A recent update on green synthesized iron and iron oxide nanoparticles for environmental applications

Nanotechnology is considered the budding discipline in various fields of science and technology. In this review, the various synthesis methods of iron and iron oxide nanoparticles were summarised with more emphasis on green synthesis - a sustainable and eco-friendly method. The mechanism of green synthesis of these nanomaterials was reviewed in recent literature. The magnetic properties of these nanomaterials were briefed which makes them unique in the family of nanomaterials. An overview of various removal methods for the pollutants such as dye, heavy metals, and emerging contaminants using green synthesized iron and iron oxide nanoparticles is discussed. The mechanism of pollutant removal methods like Fenton-like degradation, photocatalytic degradation, and adsorption techniques was also detailed. The review is concluded with the challenges and possible future aspects of these nanomaterials for various environmental applications.

Mechanism for the simultaneous removal of Sb(III) and Sb(V) from mining wastewater by phytosynthesized iron nanoparticles

Since antimony (Sb) is a toxic metalloid cost-effective method for the simultaneous removal of the two major Sb species from mining wastewater has attracted much attention. In this study, phytosynthesized iron nanoparticles (nFe) prepared using a eucalyptus leaf extract were successfully used to simultaneously remove Sb(III) and Sb(V) via an adsorption and oxidation mechanism with removal efficiencies of 100 and 97.7% for Sb(III) and Sb(V), respectively. Advanced analysis using X-ray photoelectron spectroscopy (XPS), ion chromatography-atomic fluorescence spectroscopy (IC-AFS), and electrochemical analysis confirmed that Sb(III) was oxidized to Sb(V) by Fe(III) on the nFe surface while Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) indicated that both Sb(III) and Sb(V) were adsorbed onto nFe. Adsorption of both Sb(III) and Sb(V) best fit the Langmuir adsorption model with R² of 0.999 and 0.989, respectively and both followed pseudo-second-order kinetics with R² of 0.999 and 0.981, respectively. Furthermore, the adsorption rate of Sb(III) was faster than that of Sb(V) due to inner-sphere complex formation, and the Fe-O bonds in the asymmetric tetrahedron structure of Sb(III) were easier to break due to a lower energy barrier (0.863 eV). Consequently, a simultaneous removal mechanism of Sb(III) and Sb(V) was proposed. Finally, nFe was used practically to remove Sb in mining wastewater with a removal efficiency of 93.5%, demonstrating that nFe have significant potential to remove Sb in contaminated mining wastewaters.

The role of iron nanoparticles on anaerobic digestion: mechanisms, limitations, and perspectives

Anaerobic digestion (AD) is the most widely used technology for organic matter treatment. However, multiple types of research have reported on improving the process because different operation inhibition factors and limitations affect the performance of AD process. Owing to the increasing use of iron-nanoparticles (Fe-NP) on AD, this review addresses the knowledge gaps and summarizes the finding from academic articles based on (i) the AD upgrading operations: limitations and upgrade techniques, (ii) Fe-NPs mechanisms on AD, (iii) Fe-NP effect on microbial communities associated to AD systems, and (iv) perspectives. The selected topics give the Fe-NP positive effects on the AD methane-production process in terms of gas production, effluent quality, and process optimization. The main results of this work indicate that (i) Fe-NP addition can be adapted among different feedstocks and complement other pretreatments, (ii) Fe-NP physicochemical characteristics enhance biogas production via direct interspecies electron transfer (DIET) mechanisms, and Fe-ion release due to their structure and their conductivity capability, and (iii) syntrophic bacteria and acetoclastic methanogens have been reported as the communities that better uptake Fe-NPs on their metabolisms. Finally, our research perspectives and gaps will be discussed to contribute to our knowledge of using Fe-NPs on AD systems.

The effect of iron sulfate nanoparticles and their fortified bread on Wistar rats and human cell lines

BACKGROUND

Ferrous sulfate nanoparticles (FSNPs) were synthesized and characterized to mitigate the undesirable effects of ferrous sulfate bulk particles (FSBPs) as a supplement or fortificant in health/food industries.

METHODS

The toxicity of FSNPs and FSBPs was evaluated against AGS, PLC/PRF/5, and HGF1-PI 1 cell lines. Then, Wistar rats were fed three levels of FSNPs and FSBPs fortified-bread. Growth performance, hematological parameters, and histopathological changes in treated rats were assessed after 21 days.

RESULTS

High concentrations of FSNPs (3.125 and 6.25 mM) increased the necrosis of AGS cells. A low level of FSNPs (1.57 mM) did not affect the viability of cells after 72 h. Fibroblasts did not show apoptosis and necrosis after exposing 1.57 mM of FSNPs. In rats, 9 mg elemental iron of FSNPs/day enhanced hemoglobin, PCV, and ferritin values and increased the body weight gain (p < 0.05). FSNPs fortified-bread induced no clinical symptom or histopathological lesion in rats.

CONCLUSION

FSNPs affect cells in a dose-dependent manner. The results indicate that FSNPs at the low level do not have adverse effects on normal fibroblasts and rats. Significant weight gain in rats having a low level of FSNPs compared to the FSBPs indicates the negligible toxicity of FSNPs at low concentrations.

Impact of biosurfactant and iron nanoparticles on biodegradation of polyaromatic hydrocarbons (PAHs)

Polycyclic aromatic hydrocarbons (PAHs) are hazardous toxic contaminants and considered as primary pollutants due to their persistent nature and most of them are carcinogenic and mutagenic. The key challenge in PAHs degradation is their hydrophobic nature, which makes them one of the most complex materials and inaccessible by a broad range of microorganisms. This bioavailability can be increased by using a biosurfactant. In the present study mixed PAHs were degraded using the biosurfactant producing bacterial strains. In addition, iron nanoparticles were synthesized and the impact of iron nanoparticles on the growth of the mixed bacterial strains (Pseudomonas stutzeri NA3 and Acinetobacter baumannii MN3) was optimized. The mixed PAHs (anthracene, pyrene, and benzo(a)pyrene) degradation was enhanced by addition of biosurfactant (produced by Bacillus subtilis A1) and iron nanoparticles, resulting in 85% of degradation efficiency. The addition of the biosurfactant increased the bioavailability of the PAHs in the aqueous environment, which might help bacterial cells for the initial settlement and development. The addition of iron nanoparticles increased both bacterial biomass and PAHs adsorption over their surface. These overall interactions assisted in the utilization of PAHs by the mixed bacterial consortia. This study illustrates that this integrated approach can be elaborated for the removal of the complex PAHs pollutants from soil and aqueous environments.

Using a disposable platform based on reduced graphene oxide, iron nanoparticles and molecularly imprinted polymer for voltammetric determination of vanillic acid in fruit peels

This work reports the development and application of a disposable electrochemical platform for vanillic acid (VA) detection using screen-printed electrode modified with reduced graphene oxide, iron nanoparticles and molecularly imprinted poly(pyrrole) film. The electrochemical platform was characterized by cyclic voltammetry, electrochemical impedance spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy. Using optimized conditions, the proposed disposable platform presented linear concentration ranges of 1.0 × 10^-9 to 1.5 × 10^-7 mol/L. The limits of detection and quantification obtained for the device were 3.1 × 10^-10 and 1.0 × 10^-9 mol/L, respectively. The electrochemical platform was found to be selective for VA recognition and presented voltammetric responses with good repeatability and stability. The analytical methodology developed was applied for VA determination in banana and orange peels. The results obtained showed that the proposed electrochemical platform has a good accuracy when applied for the determination of VA.

Beneficial effects of magnetite nanoparticles on soybean-Bradyrhizobium japonicum and alfalfa-Sinorhizobium meliloti associations

Nanoparticles (NPs)-based growth stimulators have promising usage in agriculture. This research analyzed the impact of citric acid-coated magnetite nanoparticles (Fe3O4-NPs; 50 mg Fe L-1) added once at pre-sowing on soybean and alfalfa seedlings growing in association with their corresponding microsymbiont partners, Bradyrhizobium japonicum and Sinorhizobium meliloti; also on the in vitro growth rate of these microorganisms. Fe-EDTA (50 mg Fe L-1) was used as a comparator. Fe3O4-NPs significantly augmented the growth rate constant (7-17%) and extracellular polysaccharides production of both microsymbionts (B. japonicum: 2-fold; S. meliloti: 43%), which probably favored bacterial adhesion to the root hairs. In both legumes, Fe3O4-NPs increased chlorophyll content (up to 56% in soybean) and improved plant growth, evidenced by a greater root biomass system (80-90% higher than the control), and increased shoot biomass (30-40%). Besides, Fe3O4-NPs addition resulted in earlier nodule formation and enhanced nodule biomass (about 2.5-fold in both species). Nodules were mainly located in the crown of the root in the NP50 treatment, while they were evenly distributed along lateral roots in the control and the comparator. Fe3O4-NPs also augmented significantly nodule leghemoglobin content (∼50-70%) and total N in legumes' shoots (ca. 20%). CAT activity increased only under NP50 treatment and no symptoms of oxidative damage were evidenced. In this work, we found that besides not being toxic neither to soybean and alfalfa plants nor to their microsymbiont partners, Fe3O4-NPs do not exert adverse effects on the symbioses establishment; oppositely, a more efficient nodulation pattern was verified in both plant species.

Nano-enabled improvements of growth and colonization rate in wheat inoculated with arbuscular mycorrhizal fungi

Arbuscular mycorrhizal fungi display desired potential to boost crop productivity and drought acclimation. Yet, whether nanoparticles can be incorporated into arbuscular mycorrhizal fungi for better improvement and its relevant morphologic and anatomical evidences are little documented. Pot culture experiment on wheat (Triticum aestivum L.) was conducted under drought stress (30% FWC) as well as well watered conditions (80% FWC) that involved priming of wheat seeds with iron nanoparticles at different concentrations (5mg L^-1, 10 mg L^-1 and 15 mg L^-1) with and without the inoculation of Glomus intraradices. The effects of treatments were observed on morphological and physiological parameters across jointing, anthesis and maturity stage. Root colonization and nanoparticle uptake trend by seeds and roots was also recorded. We observed strikingly high enhancement in biomass up to 109% under drought and 71% under well-watered conditions, and grain yield increased to 163% under drought and 60% under well-watered conditions. Iron nanoparticles at 10 mg L^-1 when combined with Glomus intraradices resulted in maximum wheat growth and yield, which mechanically resulted from higher rhizosphere colonization level, water use efficiency and photosynthetic rate under drought stress (P < 0.01). Across growth stages, optical micrograph observations affirmed higher root infection rate when combined with nanoparticles. Transmission electron microscopy indicated the penetration of nanoparticles into the seeds and translocation across roots whereas energy dispersive X-ray analyses further confirmed the presence of Fe in these organs. Iron nanoparticles significantly enhanced the growth-promoting and drought-tolerant effects of Glomus intraradices on wheat.

A one step synthesis of hybrid Fe/Ni-rGO using green tea extract for the removal of mixed contaminants

The use of biomass for the synthesis of value-added products, such as functional nanomaterial for the removal of contaminants, is a challenge. In this study, hybrid bimetallic Fe/Ni nanoparticles and reduced graphene supported bimetallic Fe/Ni nanoparticles (Fe/Ni-rGO) were prepared via a one-step green synthesis using green tea extract, and thereafter evaluated for the simultaneous removal of rifampicin (RIF) and Pb(II) from aqueous solution. The efficiencies of Pb(II) and RIF removal by Fe/Ni-rGO were 87.5 and 96.8%, respectively. The removal performance of the hybrid Fe/Ni-rGO was better than either nFe/Ni, rGO, or Fe-rGO. Detailed characterization and analyses of Fe/Ni-rGO indicated that both Fe and Ni nanoparticles were evenly distributed over the surface of rGO and that aggregation of Fe, Ni nanoparticles, and stacking of rGO in the hybrid were decreased. Furthermore, while LC-TOF-MS analysis showed that RIF was degraded into small-molecule fragments, XPS showed that Pb(II) was not reduced to Pb⁰. The major conditions impacting removal efficiency, adsorption kinetics, and fit to adsorption isotherm models were examined to better understand the removal mechanism. While the adsorption of both contaminants fit well a pseudo-second-order kinetic model, the adsorption of RIF fit the Freundlich isotherm model best, while the adsorption of Pb(II) fit the Langmuir isotherm model best. Thus, the removal mechanism of both contaminants firstly being chemical adsorbed onto the surface, while nFe/Ni continues to participate in the catalytic reduction of RIF. Moreover, Fe/Ni-rGO could be reused and performed well for wastewater treatment, thus suitable as a practical resource recycling technology.

Nano-biofortification of different crops to immune against COVID-19: A review

Human health and its improvement are the main target of several studies related to medical, agricultural and industrial sciences. The human health is the primary conclusion of many studies. The improving of human health may include supplying the people with enough and safe nutrients against malnutrition to fight against multiple diseases like COVID-19. Biofortification is a process by which the edible plants can be enriched with essential nutrients for human health against malnutrition. After the great success of biofortification approach in the human struggle against malnutrition, a new biotechnological tool in enriching the crops with essential nutrients in the form of nanoparticles to supplement human diet with balanced diet is called nano-biofortification. Nano biofortification can be achieved by applying the nano particles of essential nutrients (e.g., Cu, Fe, Se and Zn) foliar or their nano-fertilizers in soils or waters. Not all essential nutrients for human nutrition can be biofortified in the nano-form using all edible plants but there are several obstacles prevent this approach. These stumbling blocks are increased due to COVID-19 and its problems including the global trade, global breakdown between countries, and global crisis of food production. The main target of this review was to evaluate the nano-biofortification process and its using against malnutrition as a new approach in the era of COVID-19. This review also opens many questions, which are needed to be answered like is nano-biofortification a promising solution against malnutrition? Is COVID-19 will increase the global crisis of malnutrition? What is the best method of applied nano-nutrients to achieve nano-biofortification? What are the challenges of nano-biofortification during and post of the COVID-19?

Silicon assisted ameliorative effects of iron nanoparticles against cadmium stress: Attaining new equilibrium among physiochemical parameters, antioxidative machinery, and osmoregulators of Phaseolus lunatus

Currently, producing safe agricultural commodities from the crop plants cultivated in the soil with increasing heavy metal toxicity is a gigantic challenge in front of researchers. Heavy metals are absorbed and translocated in the crop plants and then transferred to every downstream consumer of the food chain, including humans, causing serious disorders and ailments. The current research presents a combined schematic application of iron nanoparticles (Fe-NPs) and/or silicon (Si), to mitigate cadmium (Cd) stress in Lima bean (Phaseolus lunatus). It was noted that Cd-induced toxicity curtailed growth, antioxidative machinery, glyoxalase system and nutrient uptake of the plants. Furthermore, the physiochemical features of Cd stressed plants, including carotenoids, chlorophyll, photochemical quenching, photosynthetic efficiency, and leaf relative water contents, were improved by the combined application of Si and Fe-NPs. Moreover, higher levels of malondialdehyde (MDA), methylglyoxal (MG), hydrogen peroxide (H₂O₂), and electrolyte leakage (EL) were observed in Cd stressed plants. Nevertheless, the independent treatment or combined application of Si and/or Fe-NPs attenuated the adversative effects of Cd on the aforementioned growth attributes. Furthermore, Si and Fe-NPs defended plants from the injurious effects of MG by improving the activities of the glyoxalase enzyme. The Si and Fe-NPs reduced Cd contents but at the same time improved uptake and accumulation of nutrients in treated plants exposed to the Cd regime. This study highlights that Si and Fe-NPs have enormous potential to mitigate Cd-induced phytotoxicity by declining Cd uptake and improving the growth attributes of plants if applied in combination.

Nanoencapsulation of basil essential oil alleviates the oxidative stress, genotoxicity and DNA damage in rats exposed to biosynthesized iron nanoparticles

The application of essential oils in food and pharmaceutical sectors face several challenges due to their sensitivity to oxidation process. Additionally, the biosynthesis of nanometals is growing rapidly; however, the toxicity of these particles against living organisms did not well explore yet. This study aimed to determine the bioactive compounds in basil essential oil (BEO) using GC-MS, to encapsulate and characterize BEO and to evaluate its protective role against the oxidative stress and genotoxicity of biosynthesized iron nanoparticles (Fe-NPs) in rats. Six groups of male Sprague-Dawley rats were treated orally for 4 weeks included the control group, Fe-NPs-treated group (100 mg/kg b.w.); EBEO-treated groups at low (100 mg/kg b.w.) or high (200 mg/kg b.w.) dose and the groups treated with Fe-NPs plus the low or the high dose of EBEO. The GC-MS analysis revealed the identification of 48 compounds and linalool was the major compound. The average sizes and zeta potential of the synthesized Fe-NPs and EBEO were 60 ± 4.76 and 120 ± 3.2 nm and 42.42 mV and -6.4 mV, respectively. Animals treated with Fe-NPs showed significant increase in serum biochemical analysis, oxidative stress markers, cytokines, lipid profile, DNA fragmentation and antioxidant enzymes and their gene expression and severe changes in the histology of liver and kidney tissues. Administration of Fe-NPs plus EBEO alleviated these disturbances and the high dose could normalize most of the tested parameters and improved the histology of liver and kidney. It could be concluded that caution should be taken in using the biosynthesized metal nanoparticles in different application. EBEO is a potent candidate to protect against the hazards of metal nanoparticles and can be applied in food and medical applications.

Iron nanoparticles as a promising compound for food fortification in iron deficiency anemia: a review

Abstract

Iron deficiency anemia (IDA) is a global health concern that is affecting all age groups significantly. Among many of the existing methods, the fortification of foods with iron salts is the best and most cost-effective strategy for targeting large-scale populations to provide nutritional security. The fortification of foods with iron salts is a challenging task because most iron complexes (ferrous sulfate, ferrous chloride) used in fortification are highly water-soluble, which impart unacceptable organoleptic changes in food vehicles and also causes gastrointestinal problems. However, insoluble iron salts (ferric pyrophosphate) do not cause unacceptable taste or color in food vehicles but low bioavailable. Nanosized iron salts can overcome these concerns. The particle size of iron salts has been reported to play an important role in the absorption of iron. Reduction in the particle size of iron compounds increases its surface area, which in turn improves its solubility in the gastric juice leading to higher absorption. Nanosized iron compound produces minimal organoleptic changes in food vehicles compared to water-soluble iron complexes. Thus nanosized iron salts find potential applications in food fortification to reduce IDA. This paper focuses on providing a complete review of the various iron salts used in IDA, including their bioavailability, the challenges to food fortification, the effects of nanosized iron salts on IDA, and their applications in food fortification.

Graphic abstract

Fortification of foods with water-soluble Fe salts imparts unacceptable organoleptic changes in food vehicle and adverse impact on health. However, insoluble iron salts do not cause unacceptable taste or color in food vehicles but low bioavailable. Using Nano-sized iron compound produces minimal organoleptic changes in food vehicles compared to changes produced by water-soluble iron complexes, improves Fe absorption in the gastrointestinal tract and does not cause any health issues.

Simultaneous reduction and adsorption of arsenite anions by green synthesis of iron nanoparticles using pomegranate peel extract

PURPOSE

Arsenic is a toxic metalloid that is present in the environment as arsenate and arsenite anions. Exposure to arsenic anions caused skin problems, degenerative diseases, kidney, liver, and lung cancer. The synthesized iron nanoparticles (NPs) were examined as a green low-cost adsorbent for the removal of arsenite anions from aqueous solution via batch adsorption procedure.

METHODS

Iron NPs were prepared in a single step by the reaction of Fe+3 0.01 M solution with a fresh aqueous solution of 2% w/v pomegranate peel extract (PPE) as both reducing and capping agents. The physicochemical properties of peel were investigated by some experiments and functional groups were determined by the FT-IR spectrum. The electrochemical behavior of PPE was studied using cyclic voltammetry on a glassy carbon electrode as produced a cathodic peak at range 120-400 mV. The progress of nZVI production was monitored by a decrease of 372 nm wavelength UV-Vis spectra of PPE. The 27 adsorption experiments were carried out as a function of solution pH, initial arsenite concentration, mass adsorbent, and contact time according to DOE.

RESULTS

The rapid rate of adsorption was observed at 20-60 min, indicating that the principal mechanism dominating the sorption process was reduction and chemical adsorption. The arsenite removal efficiency was found to be dependent on the solution pH, adsorbent dose, and initial concentration, respectively.

CONCLUSION

The experimental data show the ability of the synthesized iron NPs to remove arsenate from solution in both synthetic and polluted natural water. The thermodynamic study suggested the spontaneous and endothermic nature of adsorption of arsenite by green synthesized iron NPs. The iron NPs synthesized with PPE increased the removal of arsenite with an increase in the active surface, indicating some chemical interactions between the adsorbent and oxoanions.

Iron nanoparticles as novel vaccine adjuvants

The poor immunogenicity of peptide vaccines compared to conventional ones re usually improved by applying different adjuvants. As chemical or biological substances, adjuvants are added to vaccines to enhance and prolong the immune response. According to considerable investigations over the recent years in the context of finding new adjuvants, a handful of vaccine adjuvants have been licensed for human use. Recently, engineered nanoparticles (NPs) have been introduced as novel alternatives to traditional vaccine adjuvant. Metallic nanoparticles (MeNPs) are among the most promising NPs used for vaccine adjuvant as well as the delivery system that can improve immune responses against pathogens. Iron NPs, as an important class of MeNPs, have gained increasing attention as novel vaccine adjuvants. These particles have shown acceptable results in preclinical studies. Hence, understanding the physicochemical properties of iron NPs, including size, surface properties, charge and route of administration, is of substantial importance. The aim of this review is to provide an overview of the immunomodulatory effects of iron NPs as novel adjuvants. Furthermore, physicochemical properties of these NPs were also discussed.

Magnetite nanoparticles coated with citric acid are not phytotoxic and stimulate soybean and alfalfa growth

In this work, the internalization and distribution of citric acid-coated magnetite nanoparticles (here, Fe3O4-NPs) in soybean and alfalfa tissues and their effects on plant growth were studied. Both legumes were germinated in pots containing an inert growing matrix (vermiculite) to which Hoagland solution without (control, C), with Fe3O4-NPs (50 and 100 mgironL-1, NP50 and NP100), or with the same amount of soluble iron supplied as Fe-EDTA (Fe50, Fe100) was added once before sowing. Then, plants were watered with the standard nutrient solution. The observation of superparamagnetic signals in root tissues at harvest (26 days after emergence) indicated Fe3O4-NPs uptake by both legumes. A weak superparamagnetic signal was also present in the stems and leaves of alfalfa plants. These findings suggest that Fe3O4-NPs are readily absorbed but not translocated (soybean) or scarcely translocated (alfalfa) from the roots to the shoots. The addition of both iron sources resulted in increased root weight; however, only the addition of Fe3O4-NPs resulted in significantly higher root surface; shoot weight also increased significantly. As a general trend, chlorophyll content enhanced in plants grown in vermiculite supplemented with extra iron at pre-sowing; the greatest increase was observed with NP50. The only antioxidant enzyme significantly affected by our treatments was catalase, whose activity increased in the roots and shoots of both species exposed to Fe3O4-NPs. However, no symptoms of oxidative stress, such as increased lipid peroxidation or reactive oxygen species accumulation, were evidenced in any of these legumes. Besides, no evidence of cell membrane damage or cell death was found. Our results suggest that citric acid-coated Fe3O4-NPs are not toxic to soybean and alfalfa; instead, they behave as plant growth stimulators.

Green synthesis of iron-based nanoparticles using Chlorophytum comosum leaf extract: methyl orange dye degradation and antimicrobial properties

Nowadays, green synthesis methods have gained growing attention in nanotechnology owning to their versatile features including high efficiency, cost-effectiveness, and eco-friendliness. Here, the aqueous extract of Chlorophytum comosum leaf was applied for the preparation of iron nanoparticles (INPs) to obtain spherical and amorphous INPs with a particle size below 100 nm as confirmed by TEM. The synthesized INPs managed to eliminate methyl orange (MO) from the aqueous solution. The concentration of MO can be easily checked via ultraviolet-visible (UV-Vis) spectroscopy throughout the usage of INPs at the presence of H2O2. The synthesized INPs exhibited MO degradation efficiency of 77% after 6 h. Furthermore, the synthesized INPs exhibited antibacterial activity against both Gram-negative and Gram-positive bacteria. The prepared INPs have an impressive effect on Staphylococcus aureus at concentrations below 6 μg/ml. Overall, the synthesized INPs could considerably contribute to our combat against organic dyes and bacteria.

Increased production of hydrogen with in situ CO2 capture through the process of water splitting using magnetic core/shell structures as novel photocatalysts

One of the chief challenges in hydrogen production through the photocatalytic splitting of water is to employ an efficient photocatalyst that has an absorption edge at the range of long wavelengths. In this study, composite structures made of different Ag-based shells over the core of Fe₂O₃ nanoparticles were utilized as novel magnetic photocatalysts for hydrogen generation from water. Specifically, Ag nanoparticles, Ag/(3-aminopropyl) triethoxysilane (APTS), and Ag/polyethyleneimine (PEI) were capped on the surface of the hematite core to produce three visible light-effective photocatalysts. Structural and textural properties of the synthesized photocatalysts were confirmed by Fourier transform infrared (FTIR), X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Additionally, their thermal stability and optical properties were respectively studied using thermogravimetric analysis (TGA) and UV reflectance. Photocatalytic activities of the presented core/shells were planned either as a function of the magnetic force or composition of the shell layer. It could be noted that the incorporation of organic or polymer layer could significantly increase the electronic density at the metal centers. Thus, the ability of iron oxide to catalyze the water-splitting process could be enhanced. Hence, the variation of shell structure could show a key-role in the photocatalytic potential of the presented structures in terms of manipulating the composition of produced gases. On the other hand, the magnetic nature of hematite could also positively affect the photocatalytic activity of these structures by minimizing the scattering of light irradiation during the splitting process. Particularly, shifting the way of photocatalysts dispersion from magnetic to mechanical (during water splitting) had in turn reduced hydrogen productivity from 540 to 485 mmol h^-1 g^-1. This obviously confirms the relationship between the level of hydrogen production by the presented photocatalysts and their magnetic nature which results in quenching of irradiation scattering.

Mechanisms of enhanced hexavalent chromium removal from groundwater by sodium carboxymethyl cellulose stabilized zerovalent iron nanoparticles

Chromium (Cr) contamination poses serious threats to the environment and human health. Thus, batch and column experiments were performed to investigate hexavalent chromium [Cr (VI)] removal from solution and porous media using nanoscale zerovalent iron nanoparticles (NZVI) stabilized by sodium carboxymethyl cellulose (CMC). Batch experiments indicated that the mass ratio of Fe/CMC = 1, the presence of 150-200 mg L^-1 CMC and lower ionic strength led to optimum Cr (VI) removal in aqueous solution. Column experiments demonstrated that Cr (VI) removal was enhanced with decreasing solution pH and increasing CMC-NZVI concentration. The presence of CMC can increase Cr (VI) removal by NZVI in both aqueous solution and porous media by complexation precipitation of Cr (VI) compounds and better dispersion of NZVI. X-ray photoelectron spectroscopy (XPS) analysis revealed that an appropriate amount of CMC supported the redox reaction of Cr (VI) and NZVI. The removal of Cr (VI) through columns was 20.8% and 88.5% under no additional CMC and optimized CMC content, respectively. However, Cr (VI) removal decreased to 64.6% under excessive CMC content. The CMC modified NZVI nanoparticles were characterized by XRD, XPS and TEM techniques. These findings imply that CMC can be used as an effective stabilizer on NZVI which can in turn be applied for the efficient removal of Cr (VI) from industrial wastewater and groundwater.

Green synthesis of iron nanoparticle by tea extract (polyphenols) and its selective removal of cationic dyes

The traditional synthesis of iron nanoparticles has the problems of high cost and secondary pollution. There is an urgent need for an economic, effective and environment-friendly method to solve this key issue. Here, the iron nanoparticles were prepared by a novel biosynthesis based on extracted tea polyphenols. Five kinds of tea were tested by microwave method, and the optimum extraction conditions were determined by orthogonal experiment L₉ (3⁴). The obtained materials were characterized by XRD, SEM, FTIR, XPS, Zeta potential and UV-Vis. The iron nanoparticle has a regular spherical or ellipsoidal shape with a particle size of about 75-100 nm. It was noted that it shows good selective removal for cationic dyes (malachite green (MG), rhodamine B (RB) and methylene blue (MB)). Kinetic experiment of iron nanoparticle on cationic dyes was in accordance with the pseudo first order kinetic model. Further, the possible removal mechanism was proposed, which mainly involves the process of adsorption and reduction. Mostly, its removal capacity of Malachite green reaches as high as 190.3 mg/g.

Green synthesized iron nanoparticles as highly efficient fenton-like catalyst for degradation of dyes

Iron nanoparticles (Fe NPs) were synthesized herein through a simple and eco-friendly method using FeCl₃ and aqueous plant extract (dimocarpus longan, DL). Compared with Fe NPs prepared via traditional chemical methods, this biogenetic DL-Fe NPs demonstrates higher catalytic activity in Fenton-like reaction to degrade methyl orange (MO) in a wide pH range. It's worth noting that the DL-Fe NPs manifest a superior stability even after storage for at least 28 days. Systematic characterizations indicate that the active biomolecules from plant extract significantly contribute to the superior performance of DL-Fe NPs, by facilitating the dye molecules to be adsorbed on the surfaces of DL-Fe NPs, and providing a stable acid environment for the Fenton-like catalytic reaction. The kinetics study demonstrates this removal process conforms to the pseudo first-order model with the reaction activation energy of 41.6 kJ/mol. Moreover, various typical dyes including congo red, malachite green, methylene blue, eosin-Y and rhodamine B can be dramatically degraded by this DL-Fe NPs with a satisfactory removal efficiency.

Organ-specific toxicity of magnetic iron oxide-based nanoparticles

The unique properties of magnetic iron oxide nanoparticles determined their widespread use in medical applications, the food industry, textile industry, which in turn led to environmental pollution. These factors determine the long-term nature of the effect of iron oxide nanoparticles on the body. However, studies in the field of chronic nanotoxicology of magnetic iron particles are insufficient and scattered. Studies show that toxicity may be increased depending on oral and inhalation routes of administration rather than injection. The sensory nerve pathway can produce a number of specific effects not seen with other routes of administration. Organ systems showing potential toxic effects when injected with iron oxide nanoparticles include the nervous system, heart and lungs, the thyroid gland, and organs of the mononuclear phagocytic system (MPS). A special place is occupied by the reproductive system and the effect of nanoparticles on the health of the first and second generations of individuals exposed to the toxic effects of iron oxide nanoparticles. This knowledge should be taken into account for subsequent studies of the toxicity of iron oxide nanoparticles. Particular attention should be paid to tests conducted on animals with pathologies representing human chronic socially significant diseases. This part of preclinical studies is almost in its infancy but of great importance for further medical translation on nanomaterials to practice.

Green synthesis and environmental application of iron-based nanomaterials and nanocomposite: A review

Green chemistry has been proven to be an efficient route for nanoparticle synthesis. Plant extract based green synthesis of various nanoparticles is extensively studied since the last decade. This paper "Green synthesis and environmental application of Iron-based nanomaterials and nanocomposite: A review" unveils all the possible greener techniques for the synthesis of iron-based nanoparticles and nanocomposites. The use of different plant sources, microorganisms, and various biocompatible green reagents such as biopolymers, cellulose, haemoglobin, and glucose for the synthesis of iron nanoparticles reported in the last decade are summarized. The microwave method, along with hydrothermal synthesis due to their lower energy consumption are also been referred to as a green route. Apart from different plant parts, waste leaves and roots used for the synthesis of iron nanoparticles are extensively briefed here. This review is thus compact in nature which covers all the broad areas of green synthesis of iron nanoparticles (NPs) and iron-based nanocomposites. Detailed discussion on environmental applications of the various green synthesized iron NPs and their composites with performance efficiency is provided in this review article. The advantages of bimetallic iron-based nanocomposites over iron NPs in various environmental applications are discussed in detail. The hazards and toxic properties of green synthesized iron-based NPs are compared with those obtained from chemical methods. The prospects and challenges section of this article provides a vivid outlook of adapting such useful technique into a more versatile process with certain inclusions which may encourage and provide a new direction to future research.

A heterogeneous fenton-like system with green iron nanoparticles for the removal of bisphenol A：Performance, kinetics and transformation mechanism

Green synthesized iron nanoparticles have been received increasing attention due to its advantages of a simple, rapid and cost-effective synthesis. In this study, green iron nanoparticles by grape seed extracts (GS-Fe-NPs) were used as a heterogeneous catalyst of Fenton-like system to degrade bisphenol A (BPA) in the aqueous solution. The properties of GS-Fe-NPs before and after reaction were characterized by Scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction respectively. Effect factors, including initial pH value, initial BPA concentration, GS-Fe-NPs dosage, H₂O₂ dose and temperature on the degradation were investigated systematically. Good performances on the BPA degradation were observed over the wider pH range (3.0-11.0) in the GS-Fe-NPs/H₂O₂ system. At solution initial pH 6.9 (not adjusted), the BPA degradation efficiency could achieve 96.4% with GS-Fe-NPs 0.30 g/L and H₂O₂ 1.0 mol/L at 308 K. Furthermore, quenching experiments confirmed that OH was the main free radical and its contribution to the BPA degradation varied with the initial pH. The kinetics behavior of BPA degradation had good agreements with the pseudo-first-order model (R₁² 0.9710-0.9997), suggesting that the degradation of BPA is dominated by redox process. Based on the identified intermediates by liquid chromatography/mass spectrometry, the possible degradation pathways and BPA removal mechanism in the GS-Fe-NPs/H₂O₂ system were proposed. It provides a simple and effective water treatment method for BPA contaminated water.

Implications of iron nanoparticles in spontaneous coal combustion and the effects on climatic variables

Atmosphere, water, and soil contamination with toxic compounds is a recurrent issue due to environmental disasters, coal burning, urbanization, and industrialization, allf of which have contributed to soil contamination over the decades. Consequently, understanding of the nanomineralogy and potential hazardous elements (PHEs) in coal area soil are always a vital topic since contaminated soil can affect the environment, agricultural safety, and human health. Colombian coal mining in the La Guajira zone has been usually been related with important health and ecological effects. Coalmine rejects from active and/or abandoned operations are causes of high intensities of potential hazardous elements (PHEs) and nanoparticles (NPs, minerals and/or amorphous compounds). Although these pollutants can be reduced by sorption to NPs, in this study was recognized an analytical procedure for understand distribution of PHEs and their relationship to iron NPs(Fe-NPs) was recognized. Non and poorrly crystalline Fe-NPs performances as the major PHEs association. This complex interaction is constant and efficient in resolving PHEs in proportions above monitoring quantities. The indefinite basis of PHEs in Colombian (La Guajira area) coalmine rejects sources results in years-long leaching of PHEs into rivers and drainages. The iron-clays and their great geomobility interfere the mitigating character that Fe hydr/oxides alone show through adsorption of PHEs and their control in spontaneous coal combustion (SCC) zones. This can have significant consequences to the probable availability of several pollutants (e.g. drinking water). The new results presented in this study add novel viewpoints into the description of Fe-NPs and its incidence in SCC areas. The methodology utilized in this work can be applied as a supplementary technique to evaluate the influence of coalmining actions on ecological and human health.

Magnetically recyclable catalytic nanoparticles grafted with Bacillus subtilis β-glucosidase for efficient cellobiose hydrolysis

This study reports covalent immobilization of β-glucosidase (BGL) from Bacillus subtilis PS on magnetically recyclable iron nanoparticles for enhancing robustness, facile recovery and reuse of enzyme. Immobilized BGL iron nanoparticles (BGL-INPs) were characterized by various biophysical techniques viz. TEM, DLS, FTIR and CD spectroscopy. The efficiency and yield of immobilization were 89.78 and 84.80%, respectively. After immobilization, optimum pH remained 6.0 whereas optimum temperature upraised to 70 °C whereas apparent Km and Vmax shifted from 0.819 mM to 0.941 mM and 54.46 to 57.67 μmole/min/mg, respectively. Immobilization conferred lower activation energy and improved pH and thermal stabilities. The BGL-INPs retained 85% activity up to 10th cycle of reuse and hydrolyzed more than 90% of cellobiose to glucose within 30 min. Conclusively, improved pH, thermal stability and excellent reusability over free enzyme make BGL-INPs a promising candidate for sustainable bioethanol production and other industrial applications.

Nitrogen-doped porous carbon encapsulating iron nanoparticles for enhanced sulfathiazole removal via peroxymonosulfate activation

Developing novel catalyst with both high efficiency and stability presents an enticing prospect for peroxymonosulfate (PMS) activation. In this paper, nitrogen-doped porous carbon encapsulating iron nanoparticles (CN-Fe) was fabricated by a facile carbothermal reduction process using polyaniline (PANI) and α-Fe₂O₃ as the precursors. The stubborn antibiotics, sulfathiazole (STZ), was employed as a target pollutant, demonstrating that CN-Fe coupled with PMS could achieve 96% removal efficiency and even 57% mineralization rate of STZ within 40 min. More importantly, the rate constant of CN-Fe was calculated to be 0.07665 min^-1, which was 6 times higher than that of the commercial α-Fe₂O₃ catalyst. Furthermore, CN-Fe also presented a favorable catalytic performance for removing other organic pollutants including phenolic compounds and organic dyes. Interestingly, the catalytic activity of the used CN-Fe catalyst could be regenerated after thermal treatment (600 °C) and the as-synthesized CN-Fe catalyst exhibited excellent long-term stability with almost no loss of activity after storage for three months. The catalytic mechanism in the CN-Fe/PMS system was elucidated by electron paramagnetic resonance (EPR), linear sweep voltammetry (LSV), radical and electron trapping tests, which confirmed that sulfate radicals (SO₄^-), hydroxyl radicals (OH), superoxide radicals (O₂^-) and singlet oxygen (¹O₂) were generated in the oxidation process with the assistance of electron transfer between PMS and catalyst. To our knowledge, this was the first attempt for the application of PANI-derived CN-Fe hybrid materials as PMS activators and the findings would provide a simple and promising strategy to fabricate highly efficient and environment-benign catalysts for wastewater remediation.

Evolutions of antibiotic resistance genes (ARGs), class 1 integron-integrase (intI1) and potential hosts of ARGs during sludge anaerobic digestion with the iron nanoparticles addition

In this work, we investigated the impact of iron nanoparticle, including magnetite nanoparticles (Fe₃O₄ NPs) and nanoscale zero-valent iron (nZVI), on the anaerobic digestion (AD) performance. Moreover, the evolutions of antibiotic resistance genes (ARGs), class 1 integrons-integrase (intI1) and potential hosts of ARGs were also investigated. The optimal addition of Fe₃O₄ NPs and nZVI to promote methane production was 0.5 g/L and 1 g/L, which led to 22.07% and 23.02% increase in methane yield, respectively. The degradation rate of organic matter was also enhanced with the addition of Fe₃O₄ NPs or nZVI. The results of high-throughput sequencing showed that the reactors with iron NPs exhibited significant differences in microbial community structure, compared to the reactors with the non‑iron NPs. Iron NPs have caused the relative abundance of the dominant bacteria (Proteobacteria, Firmicutes and Actinobacteria) generally decreased, while the dominant archaea (Euryarchaeota) increased in AD sludge. Quantitative PCR results revealed that iron NPs accelerated the reductions in total absolute abundance of ARGs, especially a beta-lactamase resistance encoded gene (blaOXA). Network analysis displayed that the attenuation of ARGs was mainly attributed to the decline of potential hosts (Proteobacteria, Firmicutes and Actinobacteria). Meanwhile, environmental factors (such as pH, soluble chemical oxygen demand and heavy metals) were also strongly correlated with ARGs.

Applications of shun shell column and nanocomposite sorbent for analysis of eleven anti-hypertensive in human plasma

High-performance liquid chromatography (HPLC) and solid phase micro membrane tip extraction (SPMMTE) methods are developed for the simultaneous analysis of eleven cardiovascular drugs in human plasma. Iron nanoparticles were obtained by the green method, characterized by XRD, FT-IR, TEM, and EDS and utilized in SPMMTE for sample preparation. The mobile phase used was ammonium acetate buffer-methanol-acetonitrile (65:18:17) with a 1.0 mL/min flow rate at 260 nm detection. Column used was Sunshell C₁₈ 150 × 4.6 mm, 2.6 µm. The values of k, α, and Rs were ranged from 040 to109.22, 1.20 to 2.67 and 1.0 to 26.18. SPMMTE and HPLC methods were fast, reproducible, precise, robust, economic and rugged for analysis of methyldopa, hydrochlorothiazide, prazosin hydrochloride, furosemide, labetalol, propranolol, valsartan, losartan potassium, diltiazem, irbesartan and spironolactone in human plasma. The recoveries (%) of methyldopa, hydrochlorothiazide, prazosin hydrochloride, furosemide, labetalol, propranolol, valsartan, losartan potassium, diltiazem, irbesartan, and spironolactone were 91.0, 85.2, 92.3, 90.4, 90.1, 85.6, 86.6, 86.2, 85.1, 86.6, and 85.7, respectively. These results showed that SPMMTE and HPLC methods can be applied to test the described drugs in several matrices.

(SRT12)

A simple, eco-friendly, green routine co-precipitation method was experimented to synthesize iron nanoparticles (Fe-NPs) using the cell-free supernatant of actinobacteria. The biosynthesized nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffractometer (XRD), energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), atomic force microscopy (AFM), zeta potential analyser and Fourier transform infrared (FTIR) spectroscopy. The synthesized nanoparticles were crystalline, quasi-spherical in shape and their average size ranged from 65.0 to 86.7 nm. In our radical scavenging assays, the nanoparticles have revealed a strong antioxidant activity with respective standard ascorbic acid. The nanoparticles also exhibited a wide bactericidal action on pathogens namely Bacillus subtilis, Staphylococcus aureus, Klebsiella pneumoniae, Shigella flexneri and Escherichia coli. At 75 μg/ml concentration, the nanoparticles showed the highest inhibition against S. aureus (16.2 ± 0.45 mm), the lowest zone of inhibition was seen against K. pneumoniae (12.3 ± 0.50 mm) and moderate inhibition on other strains. Further, its cytotoxicity was seen as effective against DU145 and PC3 cells. The morphological changes caused in the prostate cell lines due to antiproliferative effect were observed through DAPI and AO/EB staining. This synthesis method specifies a new route for biosynthesis of Fe-NPs and the accomplished results illustrates that it can be used for a wide range of biomedical applications.

Iron-based nanoparticles and their potential toxicity: Focus on oxidative stress and apoptosis

Recently, there have been several studies indicating that iron-based nanomaterials may exhibit certain toxic properties. Compared to conventional iron and iron oxides, iron nanoparticles (FeNPs) have some unique physical and chemical traits which impact their absorption, biodistribution and elimination. Facilitated passage through biological barriers enables FeNPs to reach various tissues and cells, and interact with a variety of different compounds. Currently, most of the recent research is focused on the potential cytotoxicity of FeNPs, and its implications on cell viability and functions. Some studies suggested that, in certain cell types, FeNPs may increase levels of oxidative stress and induce generation of reactive oxygen species. Oxidative stress may be one of the most important mechanisms by which FeNPs exhibit cytotoxic effects. Some authors have also suggested that, in certain conditions, exposure to FeNPs, in combination with other factors, may lead to changes in intracellular signaling resulting in programmed cell death. In this short review, we focus on the recent research on potential cytotoxicity of iron-based nanomaterials, and the potential implications of this new knowledge in medicine, chemistry and biology.

In vitro and in situ experiments to evaluate the biodistribution and cellular toxicity of ultrasmall iron oxide nanoparticles potentially used as oral iron supplements

Well-absorbed iron-based nanoparticulated materials are a promise for the oral management of iron deficient anemia. In this work, a battery of in vitro and in situ experiments are combined for the evaluation of the uptake, distribution and toxicity of new synthesized ultrasmall (4 nm core) Fe₂O₃ nanoparticles coated with tartaric/adipic acid with potential to be used as oral Fe supplements. First, the in vitro simulated gastric acid solubility studies by TEM and HPLC-ICP-MS reveal a partial reduction of the core size of about 40% after 90 min at pH 3. Such scenario confirms the arrival of the nanoparticulate material in the small intestine. In the next step, the in vivo absorption through the small intestine by intestinal perfusion experiments is conducted using the sought nanoparticles in Wistar rats. The quantification of Fe in the NPs suspension before and after perfusion shows Fe absorption levels above 79%, never reported for other Fe treatments. Such high absorption levels do not seem to compromise cell viability, evaluated in enterocytes-like models (Caco-2 and HT-29) using cytotoxicity, ROS production, genotoxicity and lipid peroxidation tests. Moreover, regional differences in terms of Fe concentration are obtained among different parts of the small intestine as duodenum > jejunum > ileum. Complementary transmission electron microscopy (TEM) images show the presence of the intact particles around the intestinal microvilli without significant tissue damage. These studies show the high potential of these NP preparations for their use as oral management of anemia.

Immobilization of Cells by Magnetic Nanoparticles

Cell harvesting is one of the main expensive, labor-intensive, and energy-consuming steps in downstream processing. Cell immobilization has introduced as a valuable strategy for process intensification in biotechnological industries. Here we describe magnetic immobilization as a promising and novel technique for cell immobilization by using magnetic nanoparticles. This technique is based on the decoration of cells with magnetic nanoparticles to make them sensitive to magnetic field. So, the cells can be harvested simply by applying a magnetic separator.

Effect of iron nanoparticles on passivation of cadmium in the pig manure aerobic composting process

Cadmium (Cd) is a toxic metal ion in pig manure impacting on the ecosystem, and hence the immobilization of Cd by green synthesis of iron nanoparticles (G-nFe) is a potential approach. In this study, transformation of Cd (II) during the pig manure thermophilic aerobic composting process in the presence of G-nFe was investigated. The results show that the addition of G-nFe promoted the composting process and release of available phosphorus (AP). In all six experiments, obvious passivation of Cd occurred during 15 days' composting. Particularly when 500 mL kg^-1 of G-nFe was added and Cd (II) was added at 0.6%(w/w%), residual Cd increased from 0.0016% to 55.70% and exchangeable Cd decreased from 98.54% to 7.21%. Batch experiments revealed that the G-nFe promoted the transformation of Cd into a larger passivation fraction. X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), SEM-Mapping and Fourier transform infrared (FTIR) analysis was used to characterize residual samples, where indicated that the passivation of Cd in compost was highly correlated with the increase of P, it can be concluded that fixing with compost resulted in the formation of Cd phosphate precipitation or co-precipitation with other phosphates.