Evaluation of the performance of the Abbott ARCHITECT HIV Ag/Ab Combo Assay

Economic evaluation of universal prenatal HIV screening compared with current 'at risk' policy in a very low prevalence country

OBJECTIVES

Our objective was to economically evaluate universal HIV prenatal screening in Israel, a very low prevalence country (0.1%), compared with the current policy of testing only women belonging to high-risk (HR) groups.

DESIGN

A cost-effectiveness analytical model was constructed. Life expectancies, direct medical costs and utility weights of an HIV-positive newborn and a healthy newborn were derived from the literature. Screening was assessed using fourth-generation combo tests. Structural uncertainties were discussed with leading Israeli HIV experts. Univariate and multivariate sensitivity analyses were conducted to account for uncertainty of the model's parameters.

RESULTS

Under the current policy, about 2700 women are tested annually identifying 27 HIV-positive women. With the universal screening, 171 000 women would be tested yearly identifying 37 as HIV positive. The analysis included the increased life expectancy of vertically infected children based on current standards of care. Over the lifetime expectancy, universal screening is projected to grant 15 additional quality-adjusted life years and save $177 521 when compared with the current HR only policy.

CONCLUSIONS

Universal prenatal HIV screening is projected to be cost saving in Israel, despite a very low HIV prevalence in the general population.

Comparison of 4th-Generation HIV Antigen/Antibody Combination Assay With 3rd-Generation HIV Antibody Assays for the Occurrence of False-Positive and False-Negative Results

OBJECTIVE

To assess the false-positive and false-negative rates of a 4th-generation human immunodeficiency virus (HIV) assay, the Abbott ARCHITECT, vs 2 HIV 3rd-generation assays, the Siemens Centaur and the Ortho-Clinical Diagnostics Vitros.

METHODS

We examined 123 patient specimens. In the first phase of the study, we compared 99 specimens that had a positive screening result via the 3rd-generation Vitros assay (10 positive, 82 negative, and 7 indeterminate via confirmatory immunofluorescent assay [IFA]/Western blot [WB] testing). In the second phase, we assessed 24 HIV-1 RNA-positive (positive result via the nuclear acid amplification test [NAAT] and negative/indeterminate results via the WB test) specimens harboring acute HIV infection.

RESULTS

The 4th-generation ARCHITECT assay yielded fewer false-positive results (n = 2) than the 3rd-generation Centaur (n = 9; P = .02) and Vitros (n = 82; P <.001) assays. One confirmed positive case had a false-negative result via the Centaur assay. When specimens from the 24 patients with acute HIV-1 infection were tested, the ARCHITECT assay yielded fewer false-negative results (n = 5) than the Centaur (n = 10) (P = .13) and the other 3rd-generation tests (n = 16) (P = .002).

CONCLUSIONS

This study indicates that the 4th-generation ARCHITECT HIV assay yields fewer false-positive and false-negative results than the 3rd-generation HIV assays we tested.

Acute infections, cost and time to reporting of HIV test results in three U.S. State Public Health Laboratories

OBJECTIVE

In three U.S. State Public Health Laboratories (PHLs) using a fourth-generation immunoassay (IA), an HIV-1/HIV-2 differentiation antibody IA and a nucleic acid test (NAT), we characterized the yield and time to reporting of acute infections, and cost per positive specimen.

METHODS

Routine HIV testing data were collected from July 1, 2012-June 30, 2013 for Massachusetts and Maryland PHLs, and from November 27, 2012-June 30, 2013 for Michigan PHL. Massachusetts and Michigan used fourth-generation and differentiation IAs with NAT conducted by a referral laboratory. In Maryland, fourth-generation IA repeatedly reactive specimens were followed by a Western blot (WB), and those with negative or indeterminate results were tested with a differentiation IA and HIV-1 NAT, and if positive by NAT, confirmed by a different HIV-1 NAT. Specimens from WB-positive persons at risk for HIV-2 were tested with a differentiation IA and, if positive, with an HIV-2 WB and/or differential HIV-1/HIV-2 proviral DNA polymerase chain reaction.

RESULTS

Among 7914 specimens from Massachusetts PHL, 6069 from Michigan PHL, and 36,266 from Maryland PHL, 0.10%, 0.02% and 0.05% acute infections were identified, respectively. Massachusetts and Maryland PHLs each had 1 HIV-2 positive specimen. The median time from specimen receipt to laboratory reporting of results for acute infections at Massachusetts, Michigan and Maryland PHLs was 8, 11, and 7 days respectively. The laboratory cost per HIV positive specimen was $336 (Massachusetts), $263 (Michigan) and $210 (Maryland).

CONCLUSIONS

Acute and established infections were found by PHLs using fourth-generation IA in conjunction with antibody tests and NAT. Time to reporting of acute HIV test results to clients was suboptimal, and needs to be streamlined to expedite treatment and interrupt transmission.

Seroprevalence of Herpes Simplex Virus Type 1 and Type 2 and Coinfection With HIV and Syphilis: The First National Seroprevalence Survey in Saudi Arabia

BACKGROUND

Herpes simplex virus (HSV) infection is one of the most common viral infections worldwide. Genital herpes is associated with other sexually transmitted infections (STIs) including HIV. Data on prevalence of HSV infections and other STIs in the Kingdom of Saudi Arabia are limited.

METHODS

We conducted the first national seroprevalence survey to determine the prevalence and epidemiology of HSV infection among adult Saudis and coinfection with other STIs. Serology was used to detect HSV-1, HSV-2, HIV, and syphilis infections among 4985 participants recruited from across the Kingdom.

RESULTS

The overall prevalence of HSV-1 and HSV-2 in the enrolled population was 88.8% and 1.26%, respectively. Although not significant for HSV-2, HSV infection was more prevalent among females, those working, and those who were married (married, divorced, or widowed), especially those married at a younger age. Prevalence of both viruses was statistically significantly higher among those with low education and increased with age. Prevalence of Treponema pallidum antibodies and HIV in the sampled population was very low (0.55% and 0.06%, respectively), as was their prevalence among HSV-2-positive participants (1.6% for both). The correlation between HSV-2 infection and other STIs was significant for HIV (P < 0.0001) but not for T. pallidum antibodies (P = 0.25).

CONCLUSIONS

Herpes simplex virus type 1 infection is highly prevalent in Saudi Arabia and mostly acquired before adulthood. Herpes simplex virus type 2 prevalence is very low, acquired in adulthood, and increased with age. Monitoring the prevalence of HSV infection can help inform targeted strategies to prevent new infections, neonatal transmission, and the spread of other STIs in the Kingdom.

The ABCs of STIs: An Update on Sexually Transmitted Infections

BACKGROUND

Sexually transmitted infections (STIs) are spread primarily through sexual contact and are a major cause of morbidity and mortality worldwide. Once identified, some STIs can be cured following appropriate therapy; for others, suppressive regimens and approaches to prevent ongoing transmission are important. The incidence of many common STIs is increasing in the US as well as worldwide, and hundreds of millions of people are currently infected. Laboratory testing plays a major role in the diagnosis and treatment of STIs, and clinical laboratorians should be familiar with the current guidelines and methods for testing.

CONTENT

Accurate and sensitive methods to diagnose STIs are essential to direct appropriate antimicrobial therapy and interrupt the cycle of disease transmission. This review summarizes laboratory testing for common bacterial, viral, and parasitic causes of STIs. Disease manifestations reviewed include cervicitis and urethritis, genital ulcerative disease, human immunodeficiency virus, viral hepatitis, human papilloma virus, and vaginitis. Recent advancements in the recognition and management of STIs, including updates to diagnostic algorithms, advances in testing methods, and emerging challenges with antimicrobial resistance, are summarized.

SUMMARY

Diagnostic methods and therapeutic guidelines for STIs are rapidly evolving. In combination with changing epidemiology, the development of novel therapeutics, and advancements in diagnostic methods, this has resulted in changing practices in laboratory testing and, subsequently, management of disease. Molecular methods have facilitated personalized therapy and follow-up regimens targeted for individual types or strains of some STIs.

Comparison of HIV Testing Uptake in an Urban Academic Emergency Department Using Different Testing Assays and Support Systems

Despite 2006 recommendations by the Centers for Disease Control and Prevention for opt-out HIV testing in all healthcare settings, Emergency Department (ED) testing has been limited. We conducted an observational cohort study to assess the impact of two workflow interventions on the proportion of HIV tests ordered in an urban academic ED. First, a 4(th)-generation HIV antigen/antibody combination test replaced the existing assay, and ED staff continued to notify patients of their reactive tests. Six months later, the HIV Rapid Diagnosis Team, composed of an Infectious Diseases (ID) physician and the HIV Advanced Practice Nurse, immediately assisted with disclosure of positive results to the patients and facilitated linkage to outpatient care. The new assay did not change the proportion of HIV tests ordered (0.14-0.11%, χ2, p = 0.2). However, ID support was associated with a statistically significant increase in the proportion of HIV tests ordered (0.14-0.43%, χ2, p < 0.00010) and a nonstatistically significant increase in the proportion of new HIV diagnoses (1.6-6.8%, Fisher exact test = 0.113). Male gender and lack of insurance were associated with a reactive HIV test. Reduction of barriers to linkage to outpatient HIV care through a collaborative relationship between the ED and ID team increased HIV testing and diagnosis. The role of this model as a component of a universal HIV screening program will need to be further assessed.

Human Immunodeficiency Virus Diagnostic Testing: 30 Years of Evolution

A concern during the early AIDS epidemic was the lack of a test to identify individuals who carried the virus. The first HIV antibody test, developed in 1985, was designed to screen blood products, not to diagnose AIDS. The first-generation assays detected IgG antibody and became positive 6 to 12 weeks postinfection. False-positive results occurred; thus, a two-test algorithm was developed using a Western blot or immunofluorescence test as a confirmatory procedure. The second-generation HIV test added recombinant antigens, and the third-generation HIV tests included IgM detection, reducing the test-negative window to approximately 3 weeks postinfection. Fourth- and fifth-generation HIV assays added p24 antigen detection to the screening assay, reducing the test-negative window to 11 to 14 days. A new algorithm addressed the fourth-generation assay's ability to detect both antibody and antigen and yet not differentiate between them. The fifth-generation HIV assay provides separate antigen and antibody results and will require yet another algorithm. HIV infection may now be detected approximately 2 weeks postexposure, with a reduced number of false-positive results.

Performance of Determine Combo and other point-of-care HIV tests among Seattle MSM

BACKGROUND AND OBJECTIVE

The rapid test study was a real-time comparison of point-of-care (POC) HIV tests to determine their abilities to detect early HIV infection.

STUDY DESIGN

Men and transgender persons reporting sex with men in the prior year were recruited at the Public Health-Seattle & King County STD Clinic, Gay City Health Project, and University of Washington Primary Infection Clinic. Study tests included the OraQuick ADVANCE Rapid HIV-1/2 Antibody Test performed on oral fluids and tests performed on fingerstick whole blood specimens including OraQuick, Uni-Gold Recombigen HIV test, Determine HIV-1/2 Ag/Ab Combo, and INSTI HIV-1 Rapid Antibody Test. Specimens from subjects with negative results were sent for EIA and nucleic acid amplification testing. McNemar's exact tests compared the numbers of HIV-infected subjects detected.

RESULTS

Between February 2010 and August 2014, there were 3438 study visits. Twenty-four subjects had discordant POC results with at least one reactive and one non-reactive test, including one subject with a reactive Determine p24 antigen. OraQuick performed on oral fluids identified fewer persons compared to all fingerstick tests. OraQuick performed on fingerstick whole blood detected fewer persons compared to the Determine Combo antibody component (p=.008) and Combo overall (p=.004), and there was a trend when compared to INSTI (p=.06). The Determine Combo specificity was 98.99%.

CONCLUSIONS

As reported by others, Determine Combo underperforms compared to laboratory-based testing, but it did detect one acute infection. If these results are validated, the specificity of Determine Combo may limit its usefulness in populations with lower HIV incidence.

Costs per Diagnosis of Acute HIV Infection in Community-based Screening Strategies: A Comparative Analysis of Four Screening Algorithms

BACKGROUND

In nonhealthcare settings, widespread screening for acute human immunodeficiency virus (HIV) infection (AHI) is limited by cost and decision algorithms to better prioritize use of resources. Comparative cost analyses for available strategies are lacking.

METHODS

To determine cost-effectiveness of community-based testing strategies, we evaluated annual costs of 3 algorithms that detect AHI based on HIV nucleic acid amplification testing (EarlyTest algorithm) or on HIV p24 antigen (Ag) detection via Architect (Architect algorithm) or Determine (Determine algorithm) as well as 1 algorithm that relies on HIV antibody testing alone (Antibody algorithm). The cost model used data on men who have sex with men (MSM) undergoing community-based AHI screening in San Diego, California. Incremental cost-effectiveness ratios (ICERs) per diagnosis of AHI were calculated for programs with HIV prevalence rates between 0.1% and 2.9%.

RESULTS

Among MSM in San Diego, EarlyTest was cost-savings (ie, ICERs per AHI diagnosis less than $13.000) when compared with the 3 other algorithms. Cost analyses relative to regional HIV prevalence showed that EarlyTest was cost-effective (ie, ICERs less than $69.547) for similar populations of MSM with an HIV prevalence rate >0.4%; Architect was the second best alternative for HIV prevalence rates >0.6%.

CONCLUSIONS

Identification of AHI by the dual EarlyTest screening algorithm is likely to be cost-effective not only among at-risk MSM in San Diego but also among similar populations of MSM with HIV prevalence rates >0.4%.

Evaluation of Novel Multiplex Antibody Kit for Human Immunodeficiency Virus 1/2 and Hepatitis C Virus Using Sol-Gel Based Microarray

Background. Microarrays enable high-throughput screening (HTS) of disease-related molecules, including important signaling proteins/peptides and small molecules that are in low abundance. In this study, we developed a multiplex blood bank screening platform, referred to as the Hi3-1 assay, for simultaneous detection of human immunodeficiency virus 1/2 (HIV 1/2) and hepatitis C virus (HCV). Methods. The Hi3-1 assay was tested using four panels (Panel 1, n = 4,581 patient samples; Panel 2, n = 15 seroconversion samples; Panel 3, n = 4 performance samples; and Panel 4, n = 251 purchased positive control samples), and the results were collected by the Department of Laboratory Medicine, Korea University Medical College, Republic of Korea. The present study compares the sensitivity of the multiplex detection platform for both HIV and HCV using a sol-gel based microarray, which was based on a reference test (Architect HIV Ag/Ab Combo and Architect anti-HCV assays), in Korean patients. Results. The sensitivity of the multiplex detection platform for both HIV and HCV was 100%, and the specificity was 99.96% for HIV and 99.76% for HCV, which is equivalent to that of the reference test. Conclusion. We have successfully applied a novel screening technology to multiplex HIV and HCV diagnoses in a blood bank screening test.

Potential public health benefits of HIV testing occurring at home in Australia

In many countries, including Australia, policies have recently changed to support HIV self-testing. The decision has created much debate about the public health benefits of the strategy versus the risks. Self-testing for HIV was approved in the US on the basis that it would facilitate greater HIV testing uptake, despite having a lower sensitivity than laboratory HIV immunoassays. We calculated the frequency of self-testing that would be required among Australian gay and bisexual men at high-risk for there to be a public health benefit (detection of HIV infections that would have otherwise remained undiagnosed). At a population level, if access to HIV self-testing led to men supplementing their usual sexual health check-ups (involving a laboratory HIV immunoassay) with one or more self-tests at home, or self-tests led to untested gay and bisexual men having an HIV test for the first time, there would be a public health benefit. If men replaced their average of one laboratory HIV immunoassay per year with self-testing at home, then three self-tests would be needed to counteract the lower sensitivity of the self-test (so zero infections would be missed). If four self-tests were undertaken then additional infections would be detected (ie, there would be a public health benefit). Additional public health benefits include a reduction in the period of undiagnosed infection, which is known to be a period of relatively high infectiousness.

Decreasing Proportion of Recent Infections among Newly Diagnosed HIV-1 Cases in Switzerland, 2008 to 2013 Based on Line-Immunoassay-Based Algorithms

Background

HIV surveillance requires monitoring of new HIV diagnoses and differentiation of incident and older infections. In 2008, Switzerland implemented a system for monitoring incident HIV infections based on the results of a line immunoassay (Inno-Lia) mandatorily conducted for HIV confirmation and type differentiation (HIV-1, HIV-2) of all newly diagnosed patients. Based on this system, we assessed the proportion of incident HIV infection among newly diagnosed cases in Switzerland during 2008-2013.

Methods and Results

Inno-Lia antibody reaction patterns recorded in anonymous HIV notifications to the federal health authority were classified by 10 published algorithms into incident (up to 12 months) or older infections. Utilizing these data, annual incident infection estimates were obtained in two ways, (i) based on the diagnostic performance of the algorithms and utilizing the relationship ‘incident = true incident + false incident’, (ii) based on the window-periods of the algorithms and utilizing the relationship ‘Prevalence = Incidence x Duration’. From 2008—2013, 3’851 HIV notifications were received. Adult HIV-1 infections amounted to 3’809 cases, and 3’636 of them (95.5%) contained Inno-Lia data. Incident infection totals calculated were similar for the performance- and window-based methods, amounting on average to 1’755 (95% confidence interval, 1588—1923) and 1’790 cases (95% CI, 1679—1900), respectively. More than half of these were among men who had sex with men. Both methods showed a continuous decline of annual incident infections 2008—2013, totaling -59.5% and -50.2%, respectively. The decline of incident infections continued even in 2012, when a 15% increase in HIV notifications had been observed. This increase was entirely due to older infections. Overall declines 2008—2013 were of similar extent among the major transmission groups.

Conclusions

Inno-Lia based incident HIV-1 infection surveillance proved useful and reliable. It represents a free, additional public health benefit of the use of this relatively costly test for HIV confirmation and type differentiation.

"Express testing" in STI clinics: extant literature and preliminary implementation data

In an era of stagnant resources for sexually transmitted infection (STI) and HIV testing clinics, and at a time of ongoing-and in some cases increasing-STI and HIV transmission, it is important to trial and evaluate novel STI/HIV testing strategies. Based on the extant literature, one such approach is express testing, which includes full STI/HIV testing (as per clinical indication and client request), altered pretest counseling, and no physical examination for both men and women. In this paper, we overview the available research about express testing, including the literature on less-invasive testing, the effects of risk reduction counseling HIV testin/HIV testing, available research on various HIV testing modalities, and the reasons people undergo such testing. Thereafter, we overview our express testing program, which includes a detailed review of our clinical processes (which are unique within the published literature). Lastly, we provide some preliminary pre-implementation data to support the proposed efficacy of express testing.

A signal-to-cutoff ratio in the Abbott architect HIV Ag/Ab Combo assay that predicts subsequent confirmation of HIV-1 infection in a low-prevalence setting

A rapid diagnosis is considered important in HIV care. In 138,911 testing episodes with the Abbott Architect HIV Ag/Ab Combo assay (3,705 reactive samples), a signal-to-cutoff ratio of >151.17 had a positive predictive value of 100% and a sensitivity of 67.4% for the detection of subsequently confirmed HIV infection. We suggest that results higher than this signal-to-cutoff ratio threshold may be reported to clinicians before the completion of confirmatory testing.

Nucleic acid testing by public health referral laboratories for public health laboratories using the U.S. HIV diagnostic testing algorithm

BACKGROUND

Many public health laboratories adopting the U.S. HIV laboratory testing algorithm do not have a nucleic acid test (NAT), which is needed when the third- or fourth-generation HIV screening immunoassay is reactive and the antibody-based supplemental test is non-reactive or indeterminate.

OBJECTIVES

Among public health laboratories utilizing public health referral laboratories for NAT conducted as part of the algorithm, we evaluated the percentage of screening immunoassays needing NAT, the number of specimens not meeting APTIMA (NAT) specifications, time to APTIMA result, the proportion of acute infections (i.e., reactive APTIMA) among total infections, and screening immunoassay specificity.

STUDY DESIGN

From August 2012 to April 2013, 22 laboratories enrolled to receive free APTIMA (NAT) at New York or Florida public health referral laboratories. Data were analyzed for testing conducted until June 2013.

RESULTS

Submitting laboratories conducted a median of 4778 screening immunoassays; 0-1.3% (median 0.2%) needed NAT. Of 140 specimens received, 9 (6.4%) did not meet NAT specifications. The median time from specimen collection to reporting the 11 reactive NAT results was ten days, including six days from receipt in the submitting laboratory to shipment to the referral laboratory. Acute infections ranged from 0 to 12.5% (median 0%) of total infections. Third- and fourth-generation immunoassays met package insert specificity values.

CONCLUSIONS

Public health referral laboratories provide a feasible option for conducting NAT. Reducing the time from specimen collection to submission of specimens for NAT is an important step toward maximizing the public health impact of identifying acute infections.

Performances of fourth generation HIV antigen/antibody assays on filter paper for detection of early HIV infections

BACKGROUND

Point-of-care testing and diagnosis of HIV acute infections play important roles in preventing transmission, but HIV rapid diagnosis tests have poor capacity to detect early infections. Filter paper can be used for capillary blood collection and HIV testing using 4th generation immunoassays.

OBJECTIVES

Antigen/antibody combined immunoassays were evaluated for their capacity to identify early HIV infections using filter paper in comparison with rapid test.

STUDY DESIGN

Thirty nine serum samples collected from HIV seroconverters were spotted onto filter paper and tested by the Roche Elecsys(®) HIV Combi PT test and the DiaSorin Liaison XL Murex HIV Ab/Ag assay.

RESULTS

Fourth generation immunoassays identified 34 out of 39 HIV early infections using dried serum spot, whereas the Determine™ HIV-1/2 rapid test detected 24 out of 39 HIV positive serum (87.2% vs 61.5% respectively, p = 0.009). p24 antigen was detected by the Liaison XL in 19 dried serum samples (48.7%). In the group characterized by a negative western blot, 7 out of 8 (87.5%) and 6 out of 8 (75.0%) samples were found positive for HIV using the Elecsys and the Liaison XL, respectively. None of these eight samples classified in this group of early acute infections were found positive by the rapid test.

CONCLUSION

Fourth generation Ag/Ab immunoassays performed on dried serum spot had good performance for HIV testing during the early phases of HIV infection. This method may be useful to detect HIV early infections in hard-to-reach populations and individuals living in remote areas before rapid tests become positive.

Streamlining HIV testing for HIV preexposure prophylaxis

HIV-testing algorithms for preexposure prophylaxis (PrEP) should be optimized to minimize the risk of drug resistance, the time off PrEP required to evaluate false-positive screening results, and costs and to expedite the start of therapy for those confirmed to be infected. HIV rapid tests (RTs) for anti-HIV antibodies provide results in less than 1 h and can be conducted by nonlicensed staff at the point of care. In many regions, Western blot (WB) testing is required to confirm reactive RT results. WB testing, however, causes delays in diagnosis and adds expense. The iPrEx study evaluated the safety and efficacy of daily oral emtricitabine-tenofovir disoproxil fumarate among HIV-seronegative men and transgender women who have sex with men: HIV infection was assessed with two RTs plus WB confirmation, followed by HIV-1 plasma viral load testing. During the iPrEx study, there were 51,260 HIV status evaluations among 2,499 volunteers using RTs: 142 (0.28%) had concordant positive results (100% were eventually confirmed) and 19 (0.04%) had discordant results among 14 participants; 11 were eventually determined to be HIV infected. A streamlined approach using only one RT to screen and a second RT to confirm (without WB) would have had nearly the same accuracy. Discrepant RT results are best evaluated with nucleic acid testing, which would also increase sensitivity.

Prolonged second diagnostic window for human immunodeficiency virus type 1 in a fourth-generation immunoassay: are alternative testing strategies required?

Diagnosis of acute HIV is done by patient history and examination and testing of RNA, proviral DNA, and serology using fourth-generation antigen/antibody detection assays. We describe an HIV-1 primary infection with a second diagnostic window of 18 to 34 days on a fourth-generation immunoassay, which would have been missed using some current algorithms. Caution must be exercised when fourth-generation HIV-1 immunoassays are interpreted in isolation, and additional testing should be considered depending on patient risk assessment.

Evaluation of the clinical effectiveness of HIV antigen/antibody screening using a chemiluminescence microparticle immunoassay

Human immunodeficiency virus (HIV) screening assays have improved from single-antigen detection to detection of antigen-antibody combinations. However, concerns have been raised over the potential for false-positive results in antigen-antibody combination assays. The present study investigated the clinical effectiveness of HIV antigen/antibody (HIV Ag/Ab) combination screening by chemiluminescence microparticle immunoassay (CMIA) in over 88,000 samples from an HIV low-prevalence area of Beijing, China. The HIV Ag/Ab CMIA screening results were consistent with those obtained by Western blot and HIV-RNA testing, and had an accuracy of 99.74% (Kappa index=0.98). False-positive results were more common for women affected by clinical interfering factors (e.g., kidney disease, tumors) than for men (80.95% vs. 15.09%, P<0.001). When CMIA signal-to-cutoff ratio (S/CO) was 11.26, the sensitivity and specificity were highest (100%, 99.43%), and the area under the ROC curve (AUC) was 0.998. Specimens that were negative by CMIA (S/CO <1) were all negative by HIV-RNA testing. These results indicate that HIV Ag/Ab CMIA has a good clinical performance; however, some clinical interfering factors should be considered in HIV low-prevalence areas for their potential to skew testing results.

Performance comparison of the 4th generation Bio-Rad Laboratories GS HIV Combo Ag/Ab EIA on the EVOLIS™ automated system versus Abbott ARCHITECT HIV Ag/Ab Combo, Ortho Anti-HIV 1+2 EIA on Vitros ECi and Siemens HIV-1/O/2 enhanced on Advia Centaur

BACKGROUND

A multisite study was conducted to evaluate the performance of the Bio-Rad 4th generation GS HIV Combo Ag/Ab EIA versus Abbott 4th generation ARCHITECT HIV Ag/Ab Combo. The performance of two 3rd generation EIAs, Ortho Diagnostics Anti-HIV 1+2 EIA and Siemens HIV 1/O/2 was also evaluated.

OBJECTIVE

Study objective was comparison of analytical HIV-1 p24 antigen detection, sensitivity in HIV-1 seroconversion panels, specificity in blood donors and two HIV false reactive panels.

STUDY DESIGN

Analytical sensitivity was evaluated with International HIV-1 p24 antigen standards, the AFFSAPS (pg/mL) and WHO 90/636 (IU/mL) standards; sensitivity in acute infection was compared on 55 seroconversion samples, and specificity was evaluated on 1000 negative blood donors and two false reactive panels.

RESULTS

GS HIV Combo Ag/Ab demonstrated better analytical HIV antigen sensitivity compared to ARCHITECT HIV Ag/Ab Combo: 0.41 IU/mL versus 1.2 IU/mL (WHO) and 12.7 pg/mL versus 20.1 pg/mL (AFSSAPS); GS HIV Combo Ag/Ab EIA also demonstrated slightly better specificity compared to ARCHITECT HIV Ag/Ab Combo (100% versus 99.7%). The 4th generation HIV Combo tests detected seroconversion 7-11 days earlier than the 3rd generation HIV antibody only EIAs.

CONCLUSION

Both 4th generation immunoassays demonstrated excellent performance in sensitivity, with the reduction of the serological window period (7-11 days earlier detection than the 3rd generation HIV tests). However, GS HIV Combo Ag/Ab demonstrated improved HIV antigen analytical sensitivity and slightly better specificity when compared to ARCHITECT HIV Ag/Ab Combo assay, with higher positive predictive values (PPV) for low prevalence populations.

Costs and outcomes of laboratory diagnostic algorithms for the detection of HIV

BACKGROUND

An alternative HIV testing algorithm, designed to improve the detection of acute and early infections and differentiate between HIV-1 and HIV-2 antibodies, has been developed by the Centers for Disease Control and Prevention and the Association of Public Health Laboratories. While it promises greater sensitivity, it also raises concerns about costs.

OBJECTIVE

We sought to compare the most commonly used algorithm which was developed in 1989, a third-generation (3G) immunoassay (IA) and Western blot confirmatory test, to a newer algorithm. The new algorithm includes either a 3G or a fourth-generation (4G) initial IA, followed by confirmatory testing with a HIV-1/HIV-2 differentiation IA and, if needed, a nucleic acid amplification test (NAT).

STUDY DESIGN

We conducted an analysis of HIV testing costs from the perspective of the laboratory, and classified costs according to IA testing volume. We developed a decision analytic model, populated with cost data from 17 laboratories and published assay performance data, to compare the cost-effectiveness of the testing algorithms for a cohort of 30,000 specimens with a 1% HIV prevalence and 0.1% acute HIV infection prevalence.

RESULTS

Costs were lower in high-volume laboratories regardless of testing algorithm. For specimens confirmed positive for HIV antibody, the alternative algorithm (IA, Multispot) was less costly than the current algorithm (IA, WB); however, there was wide variation in reported testing costs. For our cohort, the alternative algorithm initiated with a 3G IA and 4G IA identified 15 and 25 more HIV infections, respectively, than the 1989 algorithm. In medium-volume laboratories, the 1989 algorithm was more costly and less effective than the alternative algorithm with a 3G IA; in high-volume laboratories, the alternative algorithm with 3G IA costs $162 more per infection detected. The alternative algorithm with 4G instead of 3G incurred an additional cost of $14,400 and $4865 in medium- and high-volume labs, respectively.

DISCUSSION

HIV testing costs varied with IA testing volumes. The additional cost of 4G over 3G IA might be justified by the additional cases of HIV detected and transmissions averted due to earlier detection.

CONCLUSION

The alternative HIV testing algorithm compares favorably to the 1989 algorithm in terms of cost and effectiveness.

Performance of the Liaison XL Murex HIV Ab/Ag test on clinical samples representing current epidemic HIV variants

Screening for HIV infection has improved since the first immunoassays. Today, diagnosis of HIV infection can be performed with fourth-generation tests that track both the patient's antibodies and HIV antigen. The objective of this study was to evaluate the clinical sensitivity and specificity of the new DiaSorin Liaison XL Murex HIV Ab/Ag assay compared to another fourth-generation assay, the Abbott Architect HIV Ag/Ab Combo kit. This work was performed on a large panel of 900 samples, including negative samples (n = 493) and HIV-positive (n = 407) representatives of HIV-1 group M subtypes and circulating recombinant forms (CRFs), HIV-1 group O, and HIV-2 variants. The results highlight the high specificity (98.9%) and sensitivity (100%) of this new fourth-generation assay, which are consistent with its use for the screening and diagnosis of HIV infections with the current circulating strains.

Clinical application evaluation of two fourth-generation human immunodeficiency virus (HIV) screening assays in West China Hospital

BACKGROUND

Fourth-generation human immunodeficiency virus (HIV) screening assays have been used in many laboratories. The Elecsys® HIV combi PT assay is a new kind of fourth-generation HIV screening assay developed to allow earlier detection of seroconversion.

METHODS

A total of 271,845 routine specimens were detected using the Elecsys® HIV combi assay and Elecsys® HIV combi PT assay from September 2010 to December 2012 in a large university hospital. Repeatedly, reactive screening samples were confirmed according to recommended confirmatory algorithms.

RESULTS

The false-positive rate and positive predictive value (PPV) of two assays are 0.08 and 78.35%, respectively, for the Elecsys® HIV combi assay and 0.07 and 82.21% for the Elecsys® HIV combi PT assay. Ninety-four percent cases with cutoff index ratio <15.0 were false-positive. When we set the specificity as 95.0 and 99.0%, PPV could increase to 98.7, 99.6, 98.8, and 99.7%, and sensitivity reduced to 99.2, 98.4, 98.5, and 96.8% for the Elecsys® HIV combi assay and the Elecsys® HIV combi PT assay, respectively.

CONCLUSIONS

The Elecsys® HIV combi PT assay shows a better performance in specificity than the Elecsys® HIV combi assay. Most weakly reactive results were false-positive, this means it still need to be improved and it will need laboratory personnel to communicate with the clinical doctor and patients more properly about the result of the assay.

Molecular HIV screening

Nuclear acid testing is more and more used for the diagnosis of infectious diseases. This paper focuses on the use of molecular tools for HIV screening. The term 'screening' will be used under the meaning of first-line HIV molecular techniques performed on a routine basis, which excludes HIV molecular tests designed to confirm or infirm a newly discovered HIV-seropositive patient or other molecular tests performed for the follow-up of HIV-infected patients. The following items are developed successively: i) presentation of the variety of molecular tools used for molecular HIV screening, ii) use of HIV molecular tools for the screening of blood products, iii) use of HIV molecular tools for the screening of organs and tissue from human origin, iv) use of HIV molecular tools in medically assisted procreation and v) use of HIV molecular tools in neonates from HIV-infected mothers.

Updated US Public Health Service guidelines for the management of occupational exposures to human immunodeficiency virus and recommendations for postexposure prophylaxis

This report updates US Public Health Service recommendations for the management of healthcare personnel (HCP) who experience occupational exposure to blood and/or other body fluids that might contain human immunodeficiency virus (HIV). Although the principles of exposure management remain unchanged, recommended HIV postexposure prophylaxis (PEP) regimens and the duration of HIV follow-up testing for exposed personnel have been updated. This report emphasizes the importance of primary prevention strategies, the prompt reporting and management of occupational exposures, adherence to recommended HIV PEP regimens when indicated for an exposure, expert consultation in management of exposures, follow-up of exposed HCP to improve adherence to PEP, and careful monitoring for adverse events related to treatment, as well as for virologic, immunologic, and serologic signs of infection. To ensure timely postexposure management and administration of HIV PEP, clinicians should consider occupational exposures as urgent medical concerns, and institutions should take steps to ensure that staff are aware of both the importance of and the institutional mechanisms available for reporting and seeking care for such exposures. The following is a summary of recommendations: (1) PEP is recommended when occupational exposures to HIV occur; (2) the HIV status of the exposure source patient should be determined, if possible, to guide need for HIV PEP; (3) PEP medication regimens should be started as soon as possible after occupational exposure to HIV, and they should be continued for a 4-week duration; (4) new recommendation-PEP medication regimens should contain 3 (or more) antiretroviral drugs (listed in Appendix A ) for all occupational exposures to HIV; (5) expert consultation is recommended for any occupational exposures to HIV and at a minimum for situations described in Box 1 ; (6) close follow-up for exposed personnel ( Box 2 ) should be provided that includes counseling, baseline and follow-up HIV testing, and monitoring for drug toxicity; follow-up appointments should begin within 72 hours of an HIV exposure; and (7) new recommendation-if a newer fourth-generation combination HIV p24 antigen-HIV antibody test is utilized for follow-up HIV testing of exposed HCP, HIV testing may be concluded 4 months after exposure ( Box 2 ); if a newer testing platform is not available, follow-up HIV testing is typically concluded 6 months after an HIV exposure.

Point of Care Technologies for HIV

Effective prevention of HIV/AIDS requires early diagnosis, initiation of therapy, and regular plasma viral load monitoring of the infected individual. In addition, incidence estimation using accurate and sensitive assays is needed to facilitate HIV prevention efforts in the public health setting. Therefore, more affordable and accessible point-of-care (POC) technologies capable of providing early diagnosis, HIV viral load measurements, and CD4 counts in settings where HIV is most prevalent are needed to enable appropriate intervention strategies and ultimately stop transmission of the virus within these populations to achieve the future goal of an AIDS-free generation. This review discusses the available and emerging POC technologies for future application to these unmet public health needs.

Establishing benchmarks and metrics for disruptive technologies, inappropriate and obsolete tests in the clinical laboratory

Benchmarks and metrics related to laboratory test utilization are based on evidence-based medical literature that may suffer from a positive publication bias. Guidelines are only as good as the data reviewed to create them. Disruptive technologies require time for appropriate use to be established before utilization review will be meaningful. Metrics include monitoring the use of obsolete tests and the inappropriate use of lab tests. Test utilization by clients in a hospital outreach program can be used to monitor the impact of new clients on lab workload. A multi-disciplinary laboratory utilization committee is the most effective tool for modifying bad habits, and reviewing and approving new tests for the lab formulary or by sending them out to a reference lab.

Performance of the Alere Determine™ HIV-1/2 Ag/Ab Combo Rapid Test with specimens from HIV-1 seroconverters from the US and HIV-2 infected individuals from Ivory Coast

BACKGROUND

FDA-approved HIV Antigen/Antibody combo (4th generation) immunoassays (IAs) can identify HIV-1 infections before the Western blot (WB) becomes positive. In the US, increased detection of acute HIV infections has been facilitated by using 4th generation IAs, but there is no FDA-approved 4th generation rapid test (RT). The Alere Determine™ HIV-1/2 Ag/Ab Combo (Determine Combo) RT detects and distinguishes HIV p24 Antigen (Ag) from Antibody (Ab) to HIV-1+HIV-2 and thus has the potential to improve diagnosis of acute HIV infection.

OBJECTIVE

To evaluate the ability of Determine Combo RT to detect acute/early HIV-1 infections and HIV-2 antibody in well-characterized plasma specimens.

STUDY DESIGN

In HIV-1 seroconverters from the US, Determine Combo reactivity was evaluated by performing the 50% cumulative frequency analysis and by comparing with 3rd and 4th generation IAs' reactivity. HIV-2 plasma specimens from Ivory Coast were tested with Determine Combo.

RESULTS

The 50% cumulative frequency analysis in 17 seroconverters placed Determine Combo (Ag+/Ab-, Ag+Ab+, Ag-/Ab+) and Ab-component reactivity at 15.5 and 7 days before WB positivity, respectively. In 26 seroconverters, Determine Combo was reactive in 99.0% and 92.5% of 3rd and 4th generation IAs-reactive specimens, respectively. All HIV-2 plasma specimens were Ab-reactive/Ag-non-reactive by Determine Combo.

CONCLUSIONS

Based on previous results with the same seroconversion panels, combined Ag/Ab reactivity of the Determine Combo appears between FDA-approved 4th and 3rd generation laboratory IAs. These data indicate that this RT could detect HIV-1 infection earlier than other RTs and it performs well in HIV-2 specimens.

Evaluation of the CDC proposed laboratory HIV testing algorithm among men who have sex with men (MSM) from five US metropolitan statistical areas using specimens collected in 2011

BACKGROUND

Until recently most testing algorithms in the United States (US) utilized Western blot (WB) as the supplemental test. CDC has proposed an algorithm for HIV diagnosis which includes an initial screen with a Combo Antigen/Antibody 4th generation-immunoassay (IA), followed by an HIV-1/2 discriminatory IA of initially reactive-IA specimens. Discordant results in the proposed algorithm are resolved by nucleic acid-amplification testing (NAAT).

OBJECTIVES

Evaluate the results obtained with the CDC proposed laboratory-based algorithm using specimens from men who have sex with men (MSM) obtained in five metropolitan statistical areas (MSAs).

STUDY DESIGN

Specimens from 992 MSM from five MSAs participating in the CDC's National HIV Behavioral Surveillance System in 2011 were tested at local facilities and CDC. The five MSAs utilized algorithms of various screening assays and specimen types, and WB as the supplemental test. At the CDC, serum/plasma specimens were screened with 4th generation-IA and the Multispot HIV-1/HIV-2 discriminatory assay was used as the supplemental test. NAAT was used to resolve discordant results and to further identify acute HIV infections from all screened-non-reactive missed by the proposed algorithm. Performance of the proposed algorithm was compared to site-specific WB-based algorithms.

RESULTS

The proposed algorithm detected 254 infections. The WB-based algorithms detected 19 fewer infections; 4 by oral fluid (OF) rapid testing and 15 by WB supplemental testing (12 OF and 3 blood). One acute infection was identified by NAAT from all screened-non-reactive specimens.

CONCLUSIONS

The proposed algorithm identified more infections than the WB-based algorithms in a high-risk MSM population. OF testing was associated with most of the discordant results between algorithms. HIV testing with the proposed algorithm can increase diagnosis of infected individuals, including early infections.

Field evaluation of the Abbott ARCHITECT HIV Ag/Ab Combo immunoassay

BACKGROUND

Fourth generation assays for HIV diagnosis are progressively being introduced into routine services, due to their improvement of diagnosis. In spite of this, HIV diagnosis remains a challenge in sub-Saharan Africa, due to false positive reactivity. There is a continuous need for field evaluations and routine validations of fourth generation HIV tests in African populations.

OBJECTIVES

Evaluate the performances of the ARCHITECT HIV Ag/Ab kit (Abbott) in a population living in an African setting-Cameroon compared to a population living in a European setting-France.

STUDY DESIGN

645 HIV samples from both France and Cameroon were evaluated. The positive panel (378 samples) included a diverse series of HIV-1 variants (groups M, N, O, and P) as well as HIV-2 samples. Results were compared to original diagnosis done with other 4th generation assays (AxSYM HIV Ag/Ab (Abbott) and Vidas HIV DUO QUICK) (bioMérieux).

RESULTS

Sensitivity of the ARCHITECT was 100% in both sites. It diagnosed all variants of the panel with different reactivity profiles following strain diversity. A wider range of reactivity was observed for group O. Specificity was slightly lower (97.6%) in Cameroon than in France (98.6%), probably due to a higher rate of false positive reactivity. ARCHITECT HIV Ag/Ab assay had high performances in clinical sensitivity and specificity and is adapted to the wide genetic diversity of viruses circulating in West Central Africa.

CONCLUSION

Our results further highlight the need to evaluate HIV diagnostic tests before introduction into routine diagnostic services both in the North and in the South.

Performance evaluation of a new fourth-generation HIV Ag/Ab combination electrochemiluminescence immunoassay – evaluation of a new HIV assay

A new fourth-generation HIV Ag/Ab electrochemiluminescence immunoassay for screening of HIV infection, the Elecsys® HIV Combi PT (Roche Diagnostics, Penzberg, Germany) assay, is going to be commercially available in clinical laboratories in China. This assay was evaluated and compared with two commonly used assays: Elecsys® HIV Combi assay and the Livzon anti-HIV-1/2 ELISA. Commercially available panels and 30 established HIV infection samples were tested to evaluate the sensitivity. In addition, a total of 675 routine clinical samples were collected and tested in West China Hospital to compare the specificity. Any reactive result from a screening test was retested and all reactive retested samples were confirmed with Western blot assay, Elecsys® HIV Ag test, Elecsys® HIV Ag confirmatory test or HIV-1 RNA NAT testing. According to the results of the HIV seroconversion panels, the Elecsys® HIV Combi PT could detect seroconversion at the same bleed or at least one bleed earlier compared to the other two assays. Among the 675 clinical samples, most results were consistent except for one specimen with a false-negative result using Elecsys® HIV Combi assay. In conclusion, the Elecsys® HIV Combi PT has shown satisfactory sensitivity and specificity to be a screening test for HIV infection.

Validation of the Elecsys® HIV combi PT assay for screening and reliable early detection of HIV-1 infection in Asia

BACKGROUND

The Elecsys® HIV combi PT assay was developed to allow earlier detection of HIV infection with increased sensitivity and specificity.

OBJECTIVES

To validate the assay for screening and reliable early detection of HIV-1 infection in Asia.

STUDY DESIGN

Samples tested reflected those routinely screened in Asia and comprised: HIV-1 antigen lysate (25 samples) and antibody (20 samples) dilutions; seven HIV-1 seroconversion panels (46 samples); 39 patient samples from early infection; 183 known-positive sera; HIV-1 p24 antigen sensitivity panel (seven samples); >500 routine clinical samples per center. The Elecsys® HIV combi PT assay was compared with fourth- (ADVIA Centaur® HIV combo, ARCHITECT® HIV combo, Elecsys® HIV combi) and third-generation (VIRONOSTIKA® HIV Uni-Form II Plus O, Zhuhai Livzon Anti-HIV EIA, Serodia® Particle Agglutination) assays commonly used in the region.

RESULTS

Overall, the Elecsys® HIV combi PT showed superior or similar sensitivity to the comparators for detecting all subtypes. The assay correctly identified all positive samples, including those taken soon after infection, and detected seroconversion at a similar or shorter time interval than the comparators. The analytical sensitivity of Elecsys® HIV combi PT for HIV-1 p24 antigen was 0.90 IU/mL, which was lower than reported previously. The assay showed good specificity (99.86%) that was superior or equivalent to the other fourth-generation assays tested.

CONCLUSIONS

These robust data demonstrate the good subtype inclusivity of the Elecsys® HIV combi PT assay and its suitability for screening and reliable early detection of HIV infection in Asia.

Current assays for HIV-1 diagnostics and antiretroviral therapy monitoring: challenges and possibilities

In 2011, there were over 34 million people living with HIV infections, placing a heavy burden on public health sectors. HIV infection is a lifelong threat that cannot be prevented by vaccination or cured by antiretroviral drugs. The infected patients rely on daily antiretroviral therapy to suppress HIV viral replication. Hence, it is important to diagnose HIV infections as early as possible and to monitor the efficacy of antiretroviral therapy every 3–6 months. Different immunoassays detecting HIV antigens and antibodies have been modified to offer better sensitivity and more rapid diagnosis. Several clinical and virological parameters, including CD4+ cell counts, viral load and drug resistance mutations, are also used for treatment monitoring. Many molecular assay optimizations are now being utilized to improve patient care. This review will focus on the most updated HIV diagnostic assays, as well as discussing the upcoming possibilities of other advanced technologies.

Performance of a fourth-generation HIV screening assay and an alternative HIV diagnostic testing algorithm

OBJECTIVE

We evaluated the performance of the GS fourth-generation antigen/antibody assay and compared Centers for Disease Control and Prevention's (CDC's) proposed alternative algorithm [repeatedly reactive fourth-generation immunoassay followed by an HIV-1/HIV-2 differentiation immunoassay and, if needed, nucleic acid test (NAT)] with the current algorithm (repeatedly reactive third-generation immunoassay followed by HIV-1 western blot).

DESIGN

A convenience sample of the following four specimen sets was acquired: 10 014 from insurance applicants, 493 known western blot-positive, 20 known western blot-indeterminate specimens, and 230 specimens from 26 HIV-1 seroconverters.

METHODS

Specimens were tested with the GS third-generation and fourth-generation immunoassays, the Multispot HIV-1/HIV-2 differentiation immunoassay, NAT, and western blot. We applied the two algorithms using these results.

RESULTS

Among insurance specimens, 13 (0.13%) specimens were immunoassay repeatedly reactive: two were HIV-positive (repeatedly reactive by third-generation and fourth-generation immunoassays, and western blot and Multispot positive); two third-generation repeatedly reactive and nine fourth-generation repeatedly reactive specimens were false-positive. Third-generation and fourth-generation specificities were 99.98% [95% confidence interval (CI) 99.93-100%] and 99.91% (95% CI 99.84-99.96%), respectively.All HIV-1 western blot-positive specimens were repeatedly reactive by third-generation and fourth-generation immunoassays. By Multispot, 491 (99.6%) were HIV-1-positive and two (0.4%) were HIV-2-positive.Only eight (40%) western blot-indeterminate specimens were fourth-generation repeatedly reactive: six were Multispot and NAT-negative and two were Multispot HIV-1-positive but NAT-negative.The alternative algorithm correctly classified as positive 102 seroconverter specimens with the third-generation immunoassay and 130 with the fourth-generation immunoassay compared with 56 using the western blot with either immunoassay.

CONCLUSION

The alternative testing algorithm improved early infection sensitivity and identified HIV-2 infections. Two potential false-positive algorithm results occurred with western blot-indeterminate specimens.

Detection of infections with hepatitis B virus, hepatitis C virus, and human immunodeficiency virus by analyses of dried blood spots--performance characteristics of the ARCHITECT system and two commercial assays for nucleic acid amplification

BACKGROUND

Nowadays, dried blood spots (DBS) are primarily used to obtain diagnostic access to risk collectives such as intravenous drug users, who are prone to infections with hepatitis B virus (HBV), hepatitis C virus (HCV), and human immunodeficiency virus (HIV). Before DBS analyses can be used in this diagnostic context, however, a comprehensive evaluation of its performance characteristics must be conducted. To the best of our knowledge, the current study presents for the first time such essential data for the Abbott ARCHITECT system, which is currently the worldwide leading platform in this field of infection diagnostics.

METHODS

The investigation comprised 1,762 paired serum/DBS samples and a total of 3,524 determinations with the Abbott ARCHITECT HBsAg, anti-HBc, anti-HBs, anti-HCV and HIV-1-p24-antigen/anti-HIV 1/2 assays as well as with the artus HBV LC PCR and VERSANT HCV RNA qualitative (TMA) tests.

RESULTS

In the context of DBS testing, a specificity of 100% was recorded for the seven serological and molecular biological assays. The analytical sensitivity of HBsAg, anti-HBc, anti-HBs, anti-HCV, HIV-1-p24-antigen/anti-HIV 1/2, HBV DNA, and HCV RNA detections in DBS eluates was 98.6%, 97.1%, 97.5%, 97.8%, 100%, 93%, and 100%, respectively.

DISCUSSION/CONCLUSIONS

The results obtained indicate that it is today possible to reliably detect HBsAg, anti-HBc, anti-HBs, anti-HCV and HIV-1-p24 antigen/anti-HIV 1/2 with state-of-the-art analytical systems such as the Abbott ARCHITECT in DBS eluates even when a comparatively high elution volume of 1,000 μl is used. They also provide evidence for the inherent analytical limits of DBS testing, which primarily concern the anti-HBc/anti-HBs system for individuals with HIV infections and nucleic acid tests with relatively low analytical sensitivity.

Detection of infections with hepatitis B virus, hepatitis C virus, and human immunodeficiency virus by analyses of dried blood spots--performance characteristics of the ARCHITECT system and two commercial assays for nucleic acid amplification

BACKGROUND

Nowadays, dried blood spots (DBS) are primarily used to obtain diagnostic access to risk collectives such as intravenous drug users, who are prone to infections with hepatitis B virus (HBV), hepatitis C virus (HCV), and human immunodeficiency virus (HIV). Before DBS analyses can be used in this diagnostic context, however, a comprehensive evaluation of its performance characteristics must be conducted. To the best of our knowledge, the current study presents for the first time such essential data for the Abbott ARCHITECT system, which is currently the worldwide leading platform in this field of infection diagnostics.

METHODS

The investigation comprised 1,762 paired serum/DBS samples and a total of 3,524 determinations with the Abbott ARCHITECT HBsAg, anti-HBc, anti-HBs, anti-HCV and HIV-1-p24-antigen/anti-HIV 1/2 assays as well as with the artus HBV LC PCR and VERSANT HCV RNA qualitative (TMA) tests.

RESULTS

In the context of DBS testing, a specificity of 100% was recorded for the seven serological and molecular biological assays. The analytical sensitivity of HBsAg, anti-HBc, anti-HBs, anti-HCV, HIV-1-p24-antigen/anti-HIV 1/2, HBV DNA, and HCV RNA detections in DBS eluates was 98.6%, 97.1%, 97.5%, 97.8%, 100%, 93%, and 100%, respectively.

DISCUSSION/CONCLUSIONS

The results obtained indicate that it is today possible to reliably detect HBsAg, anti-HBc, anti-HBs, anti-HCV and HIV-1-p24 antigen/anti-HIV 1/2 with state-of-the-art analytical systems such as the Abbott ARCHITECT in DBS eluates even when a comparatively high elution volume of 1,000 μl is used. They also provide evidence for the inherent analytical limits of DBS testing, which primarily concern the anti-HBc/anti-HBs system for individuals with HIV infections and nucleic acid tests with relatively low analytical sensitivity.

Stimuli-Responsive Polymer-Antibody Conjugates via RAFT and Tetrafluorophenyl Active Ester Chemistry

Highly efficient polymer-antibody conjugations were demonstrated via a tetrafluorophenyl active ester. A well-defined diblock copolymer was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization with a temperature-responsive block, poly(N-isopropylacrylamide), and a block of N,N-dimethylacrylamide and 2,3,5,6-tetrafluorophenyl acrylate active ester. The polymer was conjugated to anti-p24 IgG antibody with about 100% efficiency in as little as 2 h at room temperature in a pH 10.8 buffer. The temperature-responsiveness of the polymer was conferred to the polymer-antibody conjugates after conjugation. The conjugates bound p24 antigen specifically and with binding efficiency comparable to native antibodies. Thus, the active ester diblock copolymer can facilitate the synthesis of temperature-responsive bioconjugates, which may be promising reagents for immunoassays, bioseparations, and specimen-enrichment applications.

Past, present and future molecular diagnosis and characterization of human immunodeficiency virus infections

Substantive and significant advances have been made in the last two decades in the characterization of human immunodeficiency virus (HIV) infections using molecular techniques. These advances include the use of real-time measurements, isothermal amplification, the inclusion of internal quality assurance protocols, device miniaturization and the automation of specimen processing. The result has been a significant increase in the availability of results to a high level of accuracy and quality. Molecular assays are currently widely used for diagnostics, antiretroviral monitoring and drug resistance characterization in developed countries. Simple and cost-effective point-of-care versions are also being vigorously developed with the eventual goal of providing timely healthcare services to patients residing in remote areas and those in resource-constrained countries. In this review, we discuss the evolution of these molecular technologies, not only in the context of the virus, but also in the context of tests focused on human genomics and transcriptomics.

Rapid HIV screening: missed opportunities for HIV diagnosis and prevention

BACKGROUND

Although rapid HIV tests increase the number of persons who are aware of their HIV status, they may fail to detect early HIV infection.

OBJECTIVES

To evaluate the sensitivity for early HIV infection of several rapid tests and third- and fourth-generation assays compared with nucleic acid amplification testing (NAAT).

STUDY DESIGN

Sensitivity for early HIV infection was evaluated using 62 NAAT-positive/WB-negative or indeterminate specimens from the CDC Acute HIV Infection study. Specimens underwent third-generation testing with Genetic Systems 1/2+O(®) and rapid testing with Multispot HIV-1/HIV-2. A subset was also tested with four FDA-approved rapid tests and Determine HIV-1 Antigen/Antibody Rapid Test(®) and Architect HIV Antigen/Antibody Combo(®), both fourth-generation tests.

RESULTS

Of 99,111 specimens screened from April 2006 to March 2008, 62 met the definition for early HIV infection (60 NAAT-positive/seronegative and 2 NAAT-positive/Western blot indeterminate). Third-generation testing correctly detected antibody in 34 specimens (55%; 95% confidence interval (CI): 42-67); Multispot detected antibody in 16 (26%; 95% CI: 16-38). Of the 62 specimens, 33 (53%) had sufficient quantity for further testing. Rapid test sensitivities for early HIV infection ranged from 22-33% compared with 55-57% for the third-generation assay and 76-88% for the fourth-generation tests.

CONCLUSIONS

Many rapid HIV tests failed to detect half of the early HIV infection cases in whom antibody was present. Programs that screen high-incidence populations with rapid tests should consider supplemental testing with NAAT or other antigen-based tests. These data support the need for more sensitive antigen-based point-of-care screening tests for early HIV infection.

Performance of an alternative laboratory-based algorithm for HIV diagnosis in a high-risk population

BACKGROUND

An immunoassay (IA) followed by Western blot (WB) or immunofluorescence assay has been the primary algorithm used to provide laboratory confirmation of the diagnosis of HIV infection in the US for more than 20 years. Recently, an alternative diagnostic algorithm was proposed to more accurately identify early HIV-1 infection and differentiate between HIV-1 and HIV-2 infection.

OBJECTIVES

Evaluate a sequential alternative algorithm in which reactive IAs are followed by a rapid HIV test and, if negative, a nucleic acid amplification test (NAAT).

STUDY DESIGN

Specimens from high-risk persons were tested with 4 HIV IAs, 6 rapid HIV tests and NAAT (APTIMA(®)), which are approved by the United States Food and Drug Administration. IAs were repeated in duplicate if specimen volumes were sufficient. The performance of the alternative algorithm was compared to HIV WB and NAAT.

RESULTS

The original study classified 377 specimens as HIV-positive and 3070 as HIV-negative. All 4 IAs correctly identified >99.5% of HIV-positive specimens and, on initial screening, >95.8% of HIV-negative specimens. When repeated, specificity of IAs improved to >99%. Between 6.7% and 12.4% of IA-repeatedly reactive specimens required APTIMA for resolution. The alternative algorithm led to the correct classification of all IA-reactive specimens.

CONCLUSIONS

Regardless of screening IA and rapid test used, the alternative algorithm correctly classified the infection status of all persons with reactive screening IA results. Few specimens required NAAT for resolution, and the proportion requiring NAAT was lower when repeat IA test results were considered.