Application of graphene-based materials for removal of tetracyclines using adsorption and photocatalytic-degradation: A review

Graphene-based materials for metronidazole degradation: A comprehensive review

Due to its cytotoxic effect, metronidazole (MNZ) is a drug commonly used to treat bacterial, protozoal, and microaerophilic bacterial infections. After consumption, it undergoes a series of metamorphic reactions that lead to the degradation of oxidized, acetylated, and hydrolyzed metabolites in the environment. To eliminate such pollutants, due to their high potential, adsorption and photocatalysis extensive processes are used in which graphene can be used to improve efficiency. This review analyses the use of graphene as an absorbent and catalyst with a focus on absorption and photocatalytic degradation of MNZ by graphene-based materials (GBMs). The parameters affecting the adsorption, and photocatalytic degradation of MNZ are investigated and discussed. Besides, the basic mechanisms occurring in these processes are summarized and analyzed. This work provides a theoretical framework that can direct future research in the field of MNZ removal from aqueous solutions.

Synergistic effect of Cu-nanoparticles and β-cyclodextrin functionalized reduced graphene oxide nanocomposite on the adsorptive remediation of tetracycline antibiotics

Pollution by tetracyclines antibiotics has a great potential risk on human and animal health even at trace levels. Copper nanoparticles immobilized-β-cyclodextrin functionalized reduced graphene oxide (Cu/β-CD/rGO) were successfully prepared as an efficient extractor of tetracycline (TC), oxytetracycline (OTC) and doxycycline (DC) antibiotics from different environmental water samples. Tetracyclines (TCs) are strongly deposited in the matrix of Cu/β-CD/rGO nanocomposite via surface complexation with the Cu-nanoparticles besides the formation of inclusion complexes with β-cyclodextrin and π-π interaction of reduced graphene oxide. The novel nanocomposite was characterized by HRSEM, TEM, TGA, FT-IR, XPS, and XRD. The optimization of variables such as the pH, contact time, ionic strength and TC concentration were successfully analyzed. The maximum adsorption capacity (q_m) of Cu/β-CD/rGO calculated from the Langmuir isotherm was 403.2 mg.g^-1 for TC, 476.2 mg.g^-1 for OTC and 434.8 mg.g^-1 for DC at 298 K. The removal efficiency was decreased by 3.7% after five adsorption-desorption cycles. The Cu/β-CD/rGO nanocomposite was applied for removing TCs from tap water and the Nile River water samples. The novel nanocomposite demonstrated fast and highly efficient removing performance for different TCs with low levels and large sample volume.

A systematic review on antibiotics misuse in livestock and aquaculture and regulation implications in China

China is one of the largest producers and consumers of antibiotics, and China is a larger producer of livestock farming and aquaculture in the world. The livestock farming and aquaculture industry is a major area of antibiotic misuse, which has caused serious antibiotic residues and environment pollution. The antibiotic residues exceeding the standard may lead to antibiotic resistances in animals or human bodies, which poses a threat to human health. In this context, this study tries to systematically review the current situation of antibiotic misuse in livestock and aquaculture in China, and put forward corresponding regulatiory measures for the central government. Based on the status quo of livestock farming and aquaculture in China, this study reviewed antibiotic misuse in livestock farming and aquaculture and antibiotic resistance in China, introduced China's current policies on antibiotic regulation and the gap between China and developed countries, and analyzed the implications of current regulatory policies on animal health and productivity. At last, we put forward suggestions for the future antibiotic regulation, including strictly implementing the relevant laws and regulations, formulating specific supporting measures, encouraging the research and development of antibiotic substitutes, introducing advanced technologies for supervision and regulation, strengthening the publicity of science popularization and enhancing the public's awareness of the rational use of antibiotics. If these policy recommendations can be implemented, they will significantly promote the regulation of antibiotic abuse.

Two-Dimensional Nanomaterials for the Removal of Pharmaceuticals from Wastewater: A Critical Review

The removal of pharmaceuticals from wastewater is critical due to their considerable risk on ecosystems and human health. Additionally, they are resistant to conventional chemical and biological remediation methods. Two-dimensional nanomaterials are a promising approach to face this challenge due to their combination of high surface areas, high electrical conductivities, and partially optical transparency. This review discusses the state-of-the-art concerning their use as adsorbents, oxidation catalysts or photocatalysts, and electrochemical catalysts for water treatment purposes. The bibliographic search bases upon academic databases including articles published until August 2021. Regarding adsorption, high removal capacities (>200 mg g−1) and short equilibrium times (<30 min) are reported for molybdenum disulfide, metal-organic frameworks, MXenes, and graphene oxide/magnetite nanocomposites, attributed to a strong adsorbate-adsorbent chemical interaction. Concerning photocatalysis, MXenes and carbon nitride heterostructures show enhanced charge carriers separation, favoring the generation of reactive oxygen species to degrade most pharmaceuticals. Peroxymonosulfate activation via pure or photo-assisted catalytic oxidation is promising to completely degrade many compounds in less than 30 min. Future work should be focused on the exploration of greener synthesis methods, regeneration, and recycling at the end-of-life of two-dimensional materials towards their successful large-scale production and application.

A Robust PVDF-Assisted Composite Membrane for Tetracycline Degradation in Emulsion and Oil-Water Separation

Tetracycline (TC) contamination in water has progressively exacerbated the environmental crisis. It is urgent to develop a feasible method to solve this pollution in water. However, polluted water often contains oil. This paper reported a glass fiber (FG)-assisted polyvinylidene fluoride (PVDF) hybrid membrane with dual functions: high TC degradation efficiency in emulsion and oil-water separation. It can meet the catalytic degradation of tetracycline in complex water. This membrane was decorated by coating the glass fiber with PVDF solution containing hydrophilic graphene oxide hybridized NH2-MIL-101(Fe) particles. Moreover, due to its strong mechanical strength enhanced by the glass fiber, it can be reused as TC degradation catalysts for dozens of times without cracking. Thanks to the hydrophobicity of PVDF and the surface pore size of MOFs, the prepared membrane showed a good oil-water separation performance. Besides, the hydrophilic graphene oxide (GO) and NH2-MIL-101(Fe) improved the membrane's anti-fouling performance, allowing it to be reused as the separation membrane. Therefore, the outstanding stability and recoverability of the membrane make it as a fantastic candidate material for large-scale removal of TC as well as oil-water separation application.

Highly-efficient PVDF adsorptive membrane filtration based on chitosan@CNTs-COOH simultaneous removal of anionic and cationic dyes

An adsorptive membrane filtration based on polyvinylidene fluoride (PVDF) with chitosan (CS) and carboxylated carbon nanotubes (CNTs-COOH) is prepared by method of phase conversion, and the PVDF-CS@CNTs-COOH membranes can effectively separate anionic and cationic dye wastewater. Compared to pure PVDF membranes, PVDF-CS@CNTs-COOH increases pure water flux from 36.39 (L·m^-2·h^-1) to 85.25 (L·m^-2·h^-1), an increase of nearly 230%. The membrane exhibits excellent rejection performance in the filtration of six types of dye wastewater. The modified membranes also performed well in terms of rejection of mixed anionic and cationic dyes and also have a high performance in recycling, with a flux of over 94% for both anionic and cationic dyes. In addition, the adsorption curve fitting results showed that the adsorption process was more consistent with the pseudo-second-order adsorption kinetic model and Langmuir mode.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Utilization of solar energy for wastewater treatment: Challenges and progressive research trends

This article offers a trend of inventions and implementations of photocatalysis process, desalination technologies and solar disinfection techniques adapted particularly for treatment of industrial and domestic wastewater. Photocatalysis treatment of wastewater using solar energy is a promising renewable solution to reduce stresses on global water crisis. Rendering to the United Nation Environment Programme, 1/3 of world population live in water-stressed countries, while by 2025 about 2/3 of world population will face water scarcity. Major pollutants exhibited from numerous sources are critically discussed with focus on potential environmental impacts & hazards. Treatment of wastewater by photocatalysis technique, solar thermal electrochemical process, solar desalination of brackish water and solar advanced oxidation process have been presented and systematically analysed with challenges. Both heterogenous and homogenous photocatalysis techniques employed for wastewater treatment are critically reviewed. For treating domestic wastewater, solar desalination technologies adopted for purifying brackish water into potable water is presented along with key challenges and remedies. Advanced oxidation process using solar energy for degradation of organic pollutant is an important technique to be reviewed due to their effectiveness in wastewater treatment process. Present article focused on three key issues i.e. major pollutants, wastewater treatment techniques and environmental benefits of using solar power for removal of pollutants. The review also provides close ideas on further research needs and major concerns. Drawbacks associated with conventional wastewater treatment options and direct solar energy-based wastewater treatment with energy storage systems to make it convenient during day and night both listed. Although, energy storage systems increase the overall cost of the wastewater treatment plant it also increases the overall efficiency of the system on environmental cost. Cost-efficient wastewater treatment methods using solar power would significantly ensure effective water source utilization, thereby contributing towards sustainable development goals.

Photocatalytic Degradation of Antibiotics by Superparamagnetic Iron Oxide Nanoparticles. Tetracycline Case

The challenges associated with the uncontrolled presence of antibiotics such as tetracycline in the environment have necessitated their removal through different techniques. Tetracycline is hard to degrade in living organisms and can even be converted to more toxic substances. In view of this, we synthesized iron oxide nanoparticles with good magnetization (70 emu g−1) and 15 nm particle size for the adsorption and photocatalytic degradation of tetracycline. Characterization carried out on the synthesized iron oxides revealed a bandgap of 1.83 eV and an isoelectric point at pH 6.8. The results also showed that the pH of the solution does not directly influence the adsorption of tetracycline. The adsorption isotherm was consistent with the model proposed by Langmuir, having 97 mg g−1 adsorption capacity. Combined with the superparamagnetic behavior, this capacity is advantageous for the magnetic extraction of tetracycline from wastewater. The mechanisms of adsorption were proposed to be hydrogen bonding and n-π interactions. Photocatalytic degradation studies showed that approximately 40% of tetracycline degraded within 60 min of irradiation time with UV/vis light. The kinetics of photodegradation of tetracycline followed the pseudo-first-order mechanism, proceeding through hydroxyl radicals generated under illumination. Moreover, the photogenerated hydrogen peroxide could lead to heterogeneous photo-Fenton processes on the surface of iron oxide nanoparticles, additionally generating hydroxyl and hydroperoxyl radicals and facilitating photodegradation of tetracycline.

Enhanced removal of oxytetracycline antibiotics from water using manganese dioxide impregnated hydrogel composite: Adsorption behavior and oxidative degradation pathways

The present work provides the first attempt of using manganese dioxide loaded poly(sodium acrylate) hydrogel (MnO₂@PSA) to address potential threats posed by oxytetracycline (OTC) antibiotics in aqueous environment. The MnO₂@PSA was prepared via a facile approach and demonstrated enhanced removal performance even under extremely high concentrations of OTC. The outstanding performance exhibited by MnO₂@PSA was attributed to synergetic effects of adsorption oxidative degradation. The synthesized composite was characterized evaluated under varying conditions. The adsorption pH was optimized at pH 5, at which the removal efficiency OTC was reached 91.46%. According to the kinetics study, the pseudo-second-order kinetic model was the best to explain the adsorption data, implying the interaction mechanisms were dominated by chemisorption. The Langmuir isotherm model was the best to explain the isotherm data, and the corresponding maximum adsorbed amount of OTC was 1150.4 mg g^-1. The MnO₂@PSA was highly selective for OTC adsorption and degradation under the presence of natural organic matter and common environmental metal ions. The oxidative degradation study indicated that OTC molecules were structurally degraded into 15 intermediate products via six reaction pathways. Both the theoretical models and spectroscopic methods demonstrated the removal mechanism of OTC onto MnO₂@PSA was governed by ion exchange, cation-π bonding, hydrogen-bonding, and π-π electron donor-acceptor. Overall, MnO₂@PSA is an excellent and environmentally sustainable material to remove OTC from water and wastewater via the combined effects of adsorption and oxidative degradation.

Application of Magnetic Composites in Removal of Tetracycline through Adsorption and Advanced Oxidation Processes (AOPs): A Review

Water pollution induced by the tetracycline (TC) has caused global increasing attention owing to its extensive use, environmental persistence, and potential harm for human health. Adsorption and advanced oxidation processes (AOPs) have been promising techniques for TC removal due to ideal effectiveness and efficiency. Magnetic composites (MCs) which exploit the combined advantages of nano scale, alternative sources, easy preparation, and separation from wastewater are widely used for catalysis and adsorption. Herein, we intensively reviewed the available literature in order to provide comprehensive insight into the applications and mechanisms of MCs for removal of TC by adsorption and AOPs. The synthesis methods of MCs, the TC adsorption, and removal mechanisms are fully discussed. MCs serve as efficient adsorbents and photocatalysts with superior performance of photocatalytic performance in TC degradation. In addition, the TC can be effectively decomposed by the Fenton-based and SO4•− mediated oxidation under catalysis of the reported MCs with excellent catalytic performance. Based on the existing literature, we further discuss the challenge and future perspectives in MCs-based adsorption and AOPs in removing TC.

Review of phosphate removal from water by carbonaceous sorbents

In the last decades, phosphate is considered the main cause of eutrophication and has received substantial attention from the scientific community. Phosphate is a major pollutant that deteriorates water quality, which has been increasing in water resources, primarily due to the increasing global population and corresponding activities. Adsorption technology is amongst the different technologies used to decrease the phosphate levels in water, and has been found to be highly effective even at low phosphate concentrations. Carbonaceous materials and their composites have been widely used for phosphate removal due to their exceptional surface properties and high phosphate sorption capacity. Considering the importance of the topic, this study reviews the reported literature in the field of adsorptive removal of phosphate over various carbon-based adsorbents such as activated carbon, charcoal, graphene, graphene oxide, graphite and carbon nanotubes. Moreover, insights into the adsorption behaviour, experimental parameters, mechanisms, thermodynamics, effect of coexisting ions and the possible desorption processes of phosphate onto modified and unmodified carbonaceous adsorbents are also considered. Finally, research challenges and gaps have been highlighted.

Highly efficient antimicrobial agents based on sulfur-enriched, hydrophilic molybdenum disulfide nano/microparticles and coatings functionalized with palladium nanoparticles

In this research the molybdenum disulfide (MoS₂)-based nano/microparticles and coatings were synthesized through a simple, one-step hydrothermal approach without any other additives. Composition, structure, and morphology of the synthesized MoS₂-based materials were investigated using ultraviolet-visible spectroscopy (UV-Vis), inductively coupled plasma optical emission spectrometry (ICP-OES), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX) techniques. The fabricated materials exhibited relatively small (Δθ = 18.7 ± 2.5⁰) contact angle and prominent hydrophilic properties, which are attributable to sulfur-enriched MoS₂ composite as evidenced by simultaneous thermal analysis (STA) coupled with mass spectrometric (MS) analysis of evolving gaseous species (TG/DTA-MS) analysis. Such nanostructures exhibit a better adhesion of biomolecules, thus facilitating the interaction between them, as confirmed by highly effective antimicrobial action. The present study examines antimicrobial properties of hydrophilic, sulfur-enriched MoS₂ nano/microparticles as well as MoS₂-based coatings against various humans' pathogenic bacteria such as Salmonella enterica, Pseudomonas aeruginosa, Escherichia coli, methicillin-resistant Staphylococcus aureus (MRSA), Micrococcus luteus, and two Candida yeast strains (C. parapsilosis, C. krusei). The MoS₂-ns (40 μg mL^-1) showed over 90% killing efficiency against S. aureus MRSA bacteria and both Candida yeast when exposed for 24 h. Petal-like MoS₂ microstructures and heterostructured MoS₂/Ti and Pd/MoS₂/Ti coatings also possessed high antimicrobial potential and are considered as a promising antimicrobial agent. The MoS₂-induced production of intracellular reactive oxygen species (ROS) was evidenced by measuring the standard DCF dye fluorescence.