Recent advances in Cu-Fenton systems for the treatment of industrial wastewaters: Role of Cu complexes and Cu composites

The mineralization ability of a chloride-resistant γ-Cu2(OH)3Cl Fenton catalyst: effects of the cation type, salt concentration and organic pollutants

A chloride-resistant heterogeneous Fenton catalyst γ-Cu2(OH)3Cl is used to mineralize aromatic organics (phenol, bisphenol A, salicylic acid and aniline) in saline solutions with different salts (MgCl2, CaCl2, NaCl and KCl) and concentrations.

Metal-organic framework-encapsulated nanoparticles for synergetic chemo/chemodynamic therapy with targeted H2O2 self-supply

Nanocatalytic cancer therapy based on chemodynamic therapy, which converts hydrogen peroxide (H2O2) into toxic reactive oxygen species via the Fenton-like reaction, is regarded as a promising therapeutic strategy due to its specific response toward the tumor microenvironment (TME). However, the H2O2 concentration in TME (100 μM to 1 mM) is insufficient and introducing enough H2O2 or H2O2-generating agents is challenging. In view of this, we report a drug delivery system, CaO2/DOX@Cu/ZIF-8@HA (CDZH), which is capable of targeted H2O2 self-supply and exhibits outstanding chemo/chemodynamic synergetic therapy capability. CaO2/DOX@Cu/ZIF-8@HA is synthesized by fabricating biodegradable Cu/ZIF-8 shell-encapsulated CaO2 nanoparticles, loading chemotherapy drug doxorubicin, and coating a hyaluronic acid shell. In an acidic tumor microenvironment, the CDZH nanostructures targeted the release of doxorubicin, Cu2+, and CaO2. Doxorubicin affects chemotherapy and bioimaging, and CaO2 supplies H2O2 through a Cu-Fenton-like reaction to generate hydroxyl radicals with high oxidation activity for chemodynamic therapy. In brief, the drug delivery system combined targeted H2O2 self-supply and targeted bioimaging possess the potential of an efficient synergistic strategy for chemodynamic therapy and chemotherapy.

3D Printing and Chemical Dealloying of a Hierarchically Micro- and Nanoporous Catalyst for Wastewater Purification

Hierarchically porous-structured materials show tremendous potential for catalytic applications. In this work, a facile method through the combination of three-dimensional (3D) printing and chemical dealloying was employed to synthesize a nanoporous-copper-encapsulating microporous-diamond-cellular-structure (NPC@DCS) catalyst. The developed NPC@DCS catalyst was utilized as a heterogeneous photo-Fenton-like catalyst where its catalytic applications in the remediation of organic wastewater were exemplified. The experimental results demonstrated that the NPC@DCS catalyst possessed a remarkable degradation efficiency in the removal of rhodamine B with a reaction rate of 8.24 × 10^-2 min^-1 and displayed attractive stability, durability, mineralization capability, and versatility. This work not only manifests the applicability of the proposed NPC@DCS catalyst for wastewater purification in practical applications but also is anticipated to inspire the incorporation of the 3D printing technology and chemical synthesis to design high-performance metal catalysts with tunable hierarchical micro- and nanopores for functional applications.

Acceleration of the thermal degradation of PETN in the microdroplets flow reactor

Thermal degradation of pentaerythritol tetranitrate (PETN) was investigated in microdroplets within a heated capillary used as a flow reactor. The thermal degradation was monitored by aerodynamic thermal breakup droplet ionization mass spectrometry. It was shown that the PETN degradation in microdroplets occurs much faster than the bulk reaction (by 4-5 orders of magnitude). The effect of the capillary material [stainless steel (Fe, Cr), copper (Cu), or fused quartz (SiO₂)] on the thermal PETN degradation in microdroplets of water or acetonitrile was studied next. The capillary material affected the rate of thermal PETN degradation much more weakly than did the use of microdroplets (pure Cu was most conducive to the degradation). Kinetic parameters (activation energy and the frequency factor) of the PETN degradation for all the studied materials of the flow-through reactor and the solvents were estimated under the assumption that the thermal degradation is a first-order reaction. Implications of the acceleration of PETN degradation in microdroplets are discussed.

Degradation of sulfamerazine by a novel CuxO@C composite derived from Cu-MOFs under air aeration

Most metal-organic frameworks (MOFs) are synthesized from carboxylate and metal precursors by hydrothermal process, which will consume a large amount of solvent and carboxylate. To address this issue, a new strategy for Cu-based MOFs was developed, in which the Cu-based MOFs was obtained by using abundant natural polymer (tannic acid) as one of the precursors and using high-energy ball milling to achieve a self-assembly of tannic acid and copper sulfate. Based on this strategy, a novel Cu-based MOFs derivative (Cu_xO@C composite) was synthesized by high-temperature sintering of Cu-based MOFs and used for sulfamerazine (SMR) removal via O₂ activation. The BET specific surface area and average pore size of Cu_xO@C composite were 110.34 m² g^-1 and 21.06 nm, respectively, which made Cu_xO@C composite had the maximum adsorption capacity (Q_max) for SMR of 104.65 mg g^-1 and favored the subsequent degradation of SMR. The results from XRD and XPS indicated that Cu_xO@C composite contained a lot of Cu⁰ and Cu₂O with the sizes of 76.6 nm and 9.8 nm, respectively, which led to its high performance of O₂ activation. The removal efficiency of SMR and 90.2% TOC achieved 100% and 90.2%, respectively in the Cu_xO@C/air system at initial pH of 4.0, air flow rate of 100 mL min^-1, Cu_xO@C dosage of 1 g L^-1 and reaction time of 30 min. Reactive species, including H₂O₂, OH and O₂^- radicals were detected in the Cu_xO@C/air system, and OH and O₂^- were mainly responsible for the degradation of SMR.

A critical review on metal complexes removal from water using methods based on Fenton-like reactions: Analysis and comparison of methods and mechanisms

Metals mainly exist in the form of complexes in urban wastewater, fresh water and even drinking water, which are difficult to remove and further harm human health. Fenton-like reaction has been used for the removal of metal complexes. Effective removal of metal complexes using Fenton-like reaction requires the removal of both metals and organic ligands, meanwhile, the fate of metals and organic pollutions must be clearly understood. Thus, this review summarizes the relevant research on metal complex removal from using Fenton-like reactions in the past ten years, with the detailed removal approaches and mechanisms analyzed. Electro-, photo-, microwave/ultrasound-Fenton reactions or the synergistic Fenton reaction have been shown to exhibit excellent metal complex treatment capabilities. Furthermore, various catalysts, such as transition metals, bimetals and metal-free catalytic systems can expand the potential applications of Fenton-like reactions. Novel Fenton reaction methods without the addition of metals or H₂O₂, with construction of a dual active center catalyst, or with the introduction of other free radicals, are all worthy of further investigation. Due to increasing levels of environmental metal and organic pollutions remediation requirements, more research is required for the development of economical and efficient novel Fenton-like processes.

Aquatic environment remediation by atomic layer deposition-based multi-functional materials: A review

Water pollution still poses significant threats to the ecosystem and human health today. The adsorption, advanced oxidation and membranes filtration have been extensively investigated and utilized for aquatic contaminants remediation, and their efficiency is closely correlated with the advanced materials design and fabrication (e.g. adsorbents, catalysts and membranes). Thanks to uniform deposition, three-dimensional conformity and process controllability, the atomic layer deposition (ALD) has emerged as a promising strategy for fabrication of these multifunctional materials, arising their successful application in aquatic contaminants remediation. Therefore, a timely review on ALD-based water treatment materials is highly important to summarize the current opportunity and elucidate unaddressed problems in this field. Herein, in this review, the advantages of ALD process, the superiority of ALD-based materials and the corresponding decontamination performance were analyzed comprehensively, highlighting key advantages offered by this technology.

Self-Enhanced Decomplexation of Cu-Organic Complexes and Cu Recovery from Wastewaters Using an Electrochemical Membrane Filtration System

Heavy metals in industrial wastewaters are typically present as stable metal-organic complexes with their cost-effective treatment remaining a significant challenge. Herein, a self-enhanced decomplexation scenario is developed using an electrochemical membrane filtration (EMF) system for efficient decomplexation and Cu recovery. Using Cu-EDTA as a model pollutant, the EMF system achieved 81.5% decomplexation of the Cu-EDTA complex and 72.4% recovery of Cu at a cell voltage of 3 V. The ^•OH produced at the anode first attacked Cu-EDTA to produce intermediate Cu-organic complexes that reacted catalytically with the H₂O₂ generated from the reduction of dissolved oxygen at the cathode to initiate chainlike self-enhanced decomplexation in the EMF system. The decomplexed Cu products were further reduced or precipitated at the cathodic membrane surface thereby achieving efficient Cu recovery. By scavenging H₂O₂ (excluding self-enhanced decomplexation), the rate of decomplexation decreased from 8.8 × 10^-1 to 4.1 × 10^-1 h^-1, confirming the important role of self-enhanced decomplexation in this system. The energy efficiency of this system is 93.5 g kWh^-1 for Cu-EDTA decomplexation and 15.0 g kWh^-1 for Cu recovery, which is much higher than that reported in the previous literature (i.e., 7.5 g kWh^-1 for decomplexation and 1.2 g kWh^-1 for recovery). Our results highlight the potential of using EMF for the cost-effective treatment of industrial wastewaters containing heavy metals.

Zn-CNTs-Cu catalytic in-situ generation of H2O2 for efficient catalytic wet peroxide oxidation of high-concentration 4-chlorophenol

4-chlorophenol (4-CP) with high concentration is difficult to degrade thoroughly by traditional treatment methods due to its high biotoxicity and refractory to bio-degradation. A novel catalytic wet peroxide oxidation (CWPO) system based on Zn-CNTs-Cu catalysts through the in-situ generation of H₂O₂ was constructed and investigated for the degradation of high-concentration 4-CP for the first time. Zn-CNTs-Cu composite was prepared by the infiltration melting-chemical replacement method. The operational factors effect, mechanism, and pathways of Zn-CNTs-Cu/O₂ system for high concentration of 4-CP degradation were systematically performed and discussed. At the optimal experimental conditions, the degradation efficiency of 4-CP through CWPO system with Zn-CNTs-Cu/O₂ achieved 100 %, which was 689 % higher than that of wet oxidation system with O₂ alone. According to the mainly in-situ generated H₂O₂, the strong oxidative OH radical and wet-oxidation effect of O₂, high concentration of 4-CP degraded into small molecular organic matter, even been mineralized into carbon dioxide and water in the Zn-CNTs-Cu/O₂ based CWPO system. Overall, Zn-CNTs-Cu/O₂ CWPO system can efficiently degrade high-concentration 4-CP through the in-situ generation of H₂O₂ without extra replenishment, and it provides a novel method and strategy to the efficient treatment of refractory chlorophenols wastewater.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.

Synthesis of oxygen-doped graphitic carbon nitride and its application for the degradation of organic pollutants via dark Fenton-like reactions

Graphitic carbon nitride (g-C₃N₄) is a promising photocatalyst for environmental protection but its development is greatly limited for its application in dark Fenton-like reactions due to its extremely low specific surface area and lack of suitable active sites. Herein, for the first time, graphitic carbon nitride with large surface area and abundant defect sites was developed by tailoring oxygen via a simple and green method without any templates, namely, the calcination–hydrothermal–calcination successive treatment of melamine. The structure of the catalyst was characterized using several technologies, including XRD, SEM, TEM, N₂-physisorption, FT-IR, Raman spectroscopy and XPS. The results revealed that it possessed a large specific surface area (ca. 236 m² g⁻¹), while changes in its structural properties such as the formation of new defect sites and change in the content of nitrogen atoms were observed. These properties were beneficial for the in situ activation of H₂O₂ toward reactive oxygen species, as confirmed by the reactive oxygen species capturing experiments. Furthermore, various influencing factors were systemically investigated. The results clearly showed that the oxygen-doped g-C₃N₄ was light-independent and metal-free Fenton-like catalyst for the enhanced degradation of organic pollutants in wastewater. Compared to the pristine g-C₃N₄, the oxygen-doped g-C₃N₄ showed superior performance under various conditions such as broad pH range and excellent stability. Thus, this study provides a novel pathway for the treatment of organic pollutants in water.

Graphitic carbon nitride (g-C₃N₄) is a promising photocatalyst for environmental protection but its development is greatly limited for its application in dark Fenton-like reactions due to its extremely low specific surface area and lack of suitable active sites.

Anion-Dominated Copper Salicyaldimine Complexes-Structures, Coordination Mode of Nitrate and Decolorization Properties toward Acid Orange 7 Dye

A salicyaldimine ligand, 3-tert-butyl-4-hydroxy-5-(((pyridin-2-ylmethyl)imino)methyl)benzoic acid (H₂L_salpyca) and two Cu(II)−salicylaldimine complexes, [Cu(HL_salpyca)Cl] (1) and [Cu(HL_salpyca)(NO₃)]_n (2), have been synthesized. Complex 1 has a discrete mononuclear structure, in which the Cu(II) center is in a distorted square-planar geometry made up of one HL_salpyca⁻ monoanion in an NNO tris-chelating mode and one Cl⁻ anion. Complex 2 adopts a neutral one-dimensional zigzag chain structure propagating along the crystallographic [010] direction, where the Cu(II) center suits a distorted square pyramidal geometry with a τ value of 0.134, consisted of one HL_salpyca⁻ monoanion as an NNO tris-chelator and two NO₃⁻ anions. When the Cu∙∙∙O semi coordination is taken into consideration, the nitrato ligand bridges two Cu(II) centers in an unsymmetrical bridging-tridentate with a μ, κ⁴O,O′:O′,O″ coordination. Clearly, anion herein plays a critical role in dominating the formation of discrete and polymeric structures of copper salicyaldimine complexes. Noteworthy, complex 2 is insoluble but highly stable in H₂O and various organic solvents (CH₃OH, CH₃CN, acetone, CH₂Cl₂ and THF). Moreover, complex 2 shows good photocatalytic degradation activity and recyclability to accelerate the decolorization rate and enhance the decolorization performance of acid orange 7 (AO7) dye by hydrogen peroxide (H₂O₂) under daylight.