Rapid and efficient removal of diclofenac sodium from aqueous solution via ternary core-shell CS@PANI@LDH composite: Experimental and adsorption mechanism study

Facile immobilization of ethylenediamine tetramethylene-phosphonic acid into UiO-66 for toxic divalent heavy metal ions removal: An experimental and theoretical exploration

By the facile immobilization of ethylenediamine tetramethylene-phosphonic acid (EDTMPA) onto the surface and into the defects of UiO-66, a stable and efficient adsorbent named UiO-66-EDTMPA was obtained for the first time. In terms of removing aqueous heavy metal ions (Pb²⁺, Cd²⁺, Cu²⁺), the maximum adsorption capacities of UiO-66-EDTMPA reached 558.67, 271.34 and 210.89 mg/g, which were 8.77 (Pb²⁺), 5.63 (Cd²⁺) and 5.19 (Cu²⁺) times higher than raw UiO-66 respectively. The adsorption behavior of three heavy metal ions on UiO-66 and UiO-66-EDTMPA were investigated and compared through batch control experiments and theoretical studies. The main factors on adsorption progress (i.e., the dosage of EDTMPA, pH, ionic strength, co-existing ions, initial concentration, contact time, temperature) were explored, and the critical characterization (i.e., SEM, TEM, XRD, FT-IR, TG-DTG, XPS, N₂ adsorption-desorption test) were performed. Molecular dynamics (MD) simulation (radial distribution functions (RDF) and mean square displacement (MSD)) were also applied to reveal the adsorption behavior. Besides, two new quantum chemical analyses (Hirshfeld surface and independent gradient model (IGM)) were introduced into the interaction analysis between UiO-66 and EDTMPA. The complete results showed that (1) where the hydrogen bond and (vdW) connect EDTMPA to UiO-66. (2) The coordination between O, N atoms of EDTMPA and heavy metal ions (Pb²⁺, Cd²⁺, Cu²⁺) resulted in spontaneous adsorption. (3) The adsorption behavior agreed with Langmuir and pseudo-second-order model, endothermic reaction. In addition, the desorption and reusability study showed promising stable and sustainable performance. This work has some guiding significance for the experimental and theoretical study of removing heavy metal ions from aqueous solutions by MOF or modified MOF materials.

Heteroatom-free conjugated tetraphenylethylene polymers for selectively fluorescent detection of tetracycline

The antibiotic tetracycline (Tc) is a major contaminant in food and water, with adverse effects on both ecosystems and human health. The development of novel sensors for tetracycline detection is of great importance. In this work, we develop a novel heteroatom-free conjugated tetraphenylethylene polymer (TPE-CMP) fluorescence sensor for the detection of tetracycline. In the presence of Tc, the emission fluorescence of TPE-CMP was quenched by the photoinduced electron transfer mechanism to achieve high sensitivity. The polymers can detect tetracycline at a concentration of 0-100 μg/mL with a good linear correlation (0.99), and the limit of detection (LOD) is 1.23 μg/mL. Furthermore, TPE-CMP has excellent selectivity in detecting Tc in the presence of various anti-interference analytes, including ions and antibiotics. In addition, the practical feasibilities of TPE-CMP for Tc sensing were further investigated in milk, urine and wastewater samples with satisfactory recoveries (from 94.96% to 112.53% for milk, from 96.41% to 99.31% for urine and from 98.54% to 100.52% for wastewater). We have designed and synthesized TPE-CMP based on heteroatom-free for the specific fluorescence detection of tetracycline, expanding the range of fluorescence detection sensors and offering great promise for practical applications.

The Utilization of Mg-Al/Cu as Selective Adsorbent for Cationic Synthetic Dyes

Mg-Al-LDH is a chemical compound produced through co-precipitation technique and modified with Cu(NO3)2.6H2O to form Mg-Al/Cu. However, the research on the capability of these compounds for adsorbing mixtures of cationic dyes as well as malachite green (MG), methylene blue (MB), and Rodhamine-B (Rh-B) has not been carried out. Therefore, this research aims to determine the performance of Mg-Al-LDH and Mg-Al/Cu for removing cationic dyes. The materials used were characterized by using XRD powder, FT-IR, and N2 adsorption desorption. The Adsorption process was conducted by batch system and several effects were investigated, such as kinetic parameter, isotherm, and the temperature condition. The stability feature of Mg-Al-LDH and Mg-Al/Cu was obtained from the regeneration process in the five cycles. The results presented that Mg-Al/Cu was effectively produced, which was indicated by the formation of layer at 10.792° (003), 22.94° (006), 35.53° (112), 55.78° (110), and  56.59° (116). Mg-Al-LDH and Mg-Al/Cu were found to adsorbed MG than the other cationic dyes with adsorption capacity of 68.996 mg/g and 104.167 mg/g, respectively. The unique properties of Mg-Al/Cu includes, structural stability towards the reuse of adsorbent subsequently for five times, without significant decrease of adsorption capacity. Copyright © 2021 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Peroxymonosulfate activation through 2D/2D Z-scheme CoAl-LDH/BiOBr photocatalyst under visible light for ciprofloxacin degradation

The synergistic effect between photocatalytic and peroxymonosulfate (PMS) activation has been widely applied in the field of sewage treatment. In this work, we synthesized a two-dimensional/two-dimensional (2D/2D) CoAl-LDH/BiOBr Z-scheme photocatalyst via a simple method. Then, multiple detection results demonstrated that CoAl-LDH was successfully anchored onto BiOBr, as well as formed an intimate interaction. Moreover, the photocatalytic degradation performance of the catalysts/PMS/vis system had been explored under several conditions (e.g., different catalyst doses, PMS doses, anions and pollutants). The 8 wt% CoAl-LDH/BiOBr composite exhibited the highest degradation efficiency (96%) of ciprofloxacin (CIP). In addition, radicals quenching experiments and electron paramagnetic resonance (EPR) indicated that •O₂- and ¹O₂ were the primary radicals for CIP degradation. The photoelectrochemical measurement and photoluminescence (PL) confirmed that 8 wt% CoAl-LDH/BiOBr exhibited the highest separation and transfer rate of charge carriers. The liquid chromatography-mass spectrometer (LC-MS) analysis revealed that oxidation of the piperazine ring and defluorination were the main CIP degradation pathways. Density functional theory (DFT) calculation, including the laplacian bond order (LBO) and Fukui index, which was consistent with the results of LC-MS. This study explained the superiority of the synergistic effect between photocatalysis and PMS activation on the degradation of pollutants.

Mussel-inspired triple bionic adsorbent: Facile preparation of layered double hydroxide@polydopamine@metal-polyphenol networks and their selective adsorption of dyes in single and binary systems

To effectively address the serious human health challenges and ecological damage caused by organic dyes in wastewater, we developed a novel bionic adsorbent (LDH@PDA@MPNs) for the selective adsorption and removal of malachite green (MG) and crystalline violet (CV). The adsorbent was prepared using a facile two-step method based on mussel-inspired chemistry and metal complexation. The physicochemical structure, surface morphology, and composition of the LDH@PDA@MPNs were characterized by scanning electron microscopy, Fourier-transform infrared spectrometry, X-ray photoelectron spectroscopy, and thermogravimetric analysis. Adsorption of MG and CV with the LDH@PDA@MPNs was evaluated. Under optimal conditions, the maximum adsorption of MG and CV by the adsorbent was 89.608 and 40.481 mg/g, respectively. The adsorption kinetics showed that the experimental data were in good agreement with the pseudo-second-order kinetic model, and the equilibrium adsorption isotherm data fitted well with the Freundlich model. The thermodynamic results indicated that the adsorption of the dyes on LDH@PDA@MPNs was a spontaneous endothermic process. Importantly, the bionic adsorbent not only shows high removal efficiency by easy regeneration with low-cost reagents but also exhibits high selectivity for dyes in both single and binary systems. Therefore, LDH@PDA@MPNs have the potential to adsorb and remove dyes from complex wastewater solutions.

Electro-reversible adsorption as a versatile tool for the removal of diclofenac from wastewater

In this study, adsorption of a non-steroidal anti-inflammatory drug such as Diclofenac (DCF) on a commercial carbonaceous aerogel honeycomb monolith (NANOLIT®-NQ40) was ascertained. Based on, the overall design of an adsorption treatment should include a feasible regeneration process for the spent adsorbent. In this work, the adsorption/desorption process was ameliorated by coupling of electrochemical technology (anodic/cathodic polarisation). It was determined that the anodic polarisation enhanced the DCF removal and it was related with the applied voltage and the disposition of the electrodes into the bulk solution. Anodic polarisation at optimal conditions (voltage 0.9 V, electrodes gap 2.5 cm and electrolyte concentration higher than 1 mM) provoked an enhancement (around 30%) in the DCF adsorption rate. The spent aerogel regeneration method for the adsorbed or electro-adsorbed DCF was investigated and cathodic polarisation proved to be a viable regeneration alternative attaining the total regeneration of aerogel. The electro-desorption mechanism seemed to be linked to the generation of repulsive intermolecular forces in the aerogel surface. Finally, the sequential electro-adsorption/electro-desorption process was performed in successive cycles. The results confirmed the feasibility of this strategy, maintaining the efficiency with no structural changes in the monolith after several cycles being the electro-reversible adsorption of pollutants on aerogel a promising technology for the removal of pharmaceuticals from wastewater.

High adsorption of sodium diclofenac on post-synthetic modified zirconium-based metal-organic frameworks: Experimental and theoretical studies

Water pollution by pharmaceuticals is currently a great concern due to their ecological risks. In this study, zirconium-based metal-organic frameworks (UiO-66-(COOH)₂) were used for removal of the nonsteroidal anti-inflammatory drug (NSAID) diclofenac sodium (DCF). They have been synthesized using a hydrothermal method. Copper and iron metal ions were incorporated in the framework using post-synthetic modification techniques to produce UiO-66-(COOCu)₂ and UiO-66-(COOFe)₂. The resulted MOFs were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning/transmission electron microscopy, and Brunauer-Emmett-Teller. The effects of the pH, initial concentration, and adsorption time on the adsorption process of diclofenac were studied. The maximum adsorption capacities obtained on UiO-66-(COOH)₂, UiO-66-(COOCu)₂, and UiO-66-(COOFe)₂ were 480.5, 624.3, and 769.1 mg/g, respectively. The adsorption of diclofenac was found to be better fitted with Langmuir isotherm and pseudo-second-order kinetic models. The adsorption mechanism was investigated using XRD, FT-IR, density functional theory and Monte Carlo simulation, in which the latter method was used to calculate the adsorption energies and determine the possible interactions between diclofenac and the adsorbents. UiO-66-(COOH)₂, UiO-66-(COOCu)₂, and UiO-66-(COOFe)₂ exhibited good recyclability for diclofenac removal, which confirms the sustainability of these materials.

Process Optimization and Modeling of Phenol Adsorption onto Sludge-Based Activated Carbon Intercalated MgAlFe Ternary Layered Double Hydroxide Composite

A sewage sludge-based activated carbon (SBAC) intercalated MgAlFe ternary layered double hydroxide (SBAC-MgAlFe-LDH) composite was synthesized via the coprecipitation method. The adsorptive performance of the composite for phenol uptake from the aqueous phase was evaluated via the response surface methodology (RSM) modeling technique. The SBAC-MgAlFe-LDH phenol uptake capacity data were well-fitted to reduced RSM cubic model (R² = 0.995, R²-adjusted = 0.993, R²-predicted = 0.959 and p-values < 0.05). The optimum phenol adsorption onto the SBAC-MgAlFe-LDH was achieved at 35 °C, 125 mg/L phenol, and pH 6. Under the optimal phenol uptake conditions, pseudo-first-order and Avrami fractional-order models provided a better representation of the phenol uptake kinetic data, while the equilibrium data models’ fitting follows the order; Liu > Langmuir > Redlich–Peterson > Freundlich > Temkin. The phenol uptake mechanism was endothermic in nature and predominantly via a physisorption process (ΔG° = −5.33 to −5.77 kJ/mol) with the involvement of π–π interactions between the phenol molecules and the functionalities on the SBAC-LDH surface. The maximum uptake capacity (216.76 mg/g) of SBAC-MgAlFe-LDH was much higher than many other SBAC-based adsorbents. The improved uptake capacity of SBAC-LDH was attributed to the effective synergetic influence of SBAC-MgAlFe-LDH, which yielded abundant functionalized surface groups that favored higher aqueous phase uptake of phenol molecules. This study showcases the potential of SBAC-MgAlFe-LDH as an effective adsorbent material for remediation of phenolic wastewater

Underwater suspended bifunctionalized polyethyleneimine-based sponge for selective removal of anionic pollutants from aqueous solution

Highly selective and efficient removal of ionic pollutants, including ionic organic compounds and heavy metal ions from water, is still a huge challenge due to the complex nature of polluted water. To meet this challenge, we presented the synthesis of bifunctionalized polyethyleneimine-based sponges through cryo-polymerization via BDDE as the crosslinker followed by bifunctional modification with glycidyl trimethylammonium chloride (GTAC) and phenyl glycidyl ether (PGE), which simultaneously afford quaternary ammonium cation (strongly basic and hydrophilic) and phenyl (hydrophobic) functionalities, respectively. As a result, a hybrid hydrophilic-hydrophobic sponge is generated that could stably be suspended underwater due to the co-operative effect of the water-absorbing hydrophilic domain and the hydrophobic domain generating buoyancy. The quaternized and phenyl-functionalized PEI-based sponge (S_QP-PEI) demonstrated highly selective and efficient removal of anionic pollutants from water, including diclofenac sodium (DIC), methyl orange (MO) and chromium (Cr(VI)) with co-existing interferences. The Langmuir isotherms revealed the maximum adsorption capacities of 342.7 mg/g, 491.9 mg/g, and 242.7 mg/g for DIC, MO, and Cr(VI), respectively. The studies of adsorption mechanism suggested that the bifunctional S_QP-PEI sponge indeed afford both strong anion-exchange interaction and π-π interaction toward organic pollutants DIC and MO, and the strong anion-exchange interaction can be the dominated adsorption mechanism for anionic DIC, MO and Cr(VI) species. The suspended S_QP-PEI also demonstrated excellent reusability, which shows the potential of S_QP-PEI for real applications.

Effectively removing indole-3-butyric acid from aqueous solution with magnetic layered double hydroxide-based adsorbents

The magnetic layered double hydroxide-based materials (MLDHs) with the metal composition of Mg(II)Al(III) were synthesized by different conditions as the adsorbent for removal of a phytohormone, indole-3-butyric acid (IBA). The morphological characteristics of MLDHs were studied through various characterization methods such as XRD, SEM, TEM, FTIR, BET, Zeta-potential and VSM. The adsorption results showed that the adsorption capacity of MLDH-1 synthesized by co-precipitation method with ammonia as the base source was the best (maximum 522.6 mg/g). The extent of adsorption in the pH range of 3.0-9.0 was observed to be no noticeable change. From the economical point of view, 1.0 g/L MLDH-1 composites were selected as optimum parameter. For a given adsorbent concentration (C_s), its kinetics and adsorption isotherm followed the pseudo-second-order and Liu isotherm model, respectively. The adsorbed sample can be easily magnetically separated and regenerated with NaNO₃. The adsorption process was spontaneous and exothermic, including two path stages: surface adsorption of lamellar and interlayer anion exchange. The research makes a contribution to evaluating the ability of MLDHs in IBA removal and helping the public to understand the mechanism of adsorption process.

A nanozyme-based enhanced system for total removal of organic mercury and SERS sensing

Total removal of organic mercury in industrial wastewater is a crucially important task facing environmental pollution in the current world. Herein, we demonstrate the fabrication of Au-NiFe layered double hydroxide (LDH)/rGO nanocomposite as not only an efficient nanozyme with oxidase-like activity but also an efficient surface-enhanced Raman spectroscopy (SERS) substrate to determine organic mercury, with the minimum detection concentration as low as 1 × 10^-8 M. According to the binding energy of X-Ray photoelectron spectrometer (XPS) and the free radicals of electron paramagnetic resonance (EPR) spectra, the mechanism of catalytic enhanced degradation is the production of Au-amalgam on Au surface, accelerating the electron transfer and the generation of O₂^•- radicals from oxygen molecules and •CH₃ radicals from the methyl group in MeHg to participate the oxidase-like reaction. Furthermore, the Au-NiFe LDH/rGO nanocomposite is able to degrade and remove 99.9% of organic mercury in two hours without the secondary pollution by Hg²⁺. In addition, the material can be used for the multiple degradation-regeneration cycles in actual applications, which is significant in terms of the environmental and economic point of view. This work may open a new horizon for both highly sensitive detection and thorough degradation of organic mercury in environmental science and technology.

Application of Ni0.5Zn0.5Fe2O4 magnetic nanoparticles for diclofenac adsorption: isotherm, kinetic and thermodynamic investigation

Ni_0.5Zn_0.5Fe₂O₄ magnetic nanoparticles were synthesized to obtain a new efficient adsorbent for diclofenac sodium (DF) removal. Fourier Transform Infrared (FTIR), Energy Dispersive Spectrometer (EDS), scanning electron microscope (SEM), Brunauer-Emmett-Teller (BET) and vibrating sample magnetometer (VSM) were applied to characterize the prepared adsorbent. These analyses revealed that adsorbent was successfully prepared with average particle diameter of about 50 nm and a BET surface area of 168.09 m²/g. The saturation magnetization value of magnetic nanoparticles (MNPs) was found to be 24.90 emu/g, thus, adsorbent was efficiently separated from the solution by a facile and rapid magnetic separation process. The effect of adsorption time, amount of adsorbent, initial pH of the solution, initial diclofenac concentration and temperature on the removal of DF were evaluated. Also, the adsorption data were best fitted to the pseudo-first-order kinetic model and Langmuir isotherm model. The thermodynamics studies suggested spontaneous and exothermic adsorption. The maximum diclofenac adsorption amount of the synthesized nanoadsorbent was 52.91 mg/g, which is higher than many recently studied adsorbents.

Hollow Porous CoSnOx Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers as Anode Material for High-Performance Lithium Storage

CoSnO₃, as a high theoretical capacity electrode material (1235 mAh g^-1) for lithium storage, has been limited due to its low rate performance, huge volume expansion, and an unstable solid electrolyte interface (SEI). A rational design of the material structure including carbon coating can effectively solve the problems. To buffer the volume change and achieve a superior rate capability, hollow CoSnO_x nanocubes encapsulated in 1D N-doped carbon nanofibers (CNFs) were fabricated by electrospinning, showing a final discharge capacity of 733 mAh g^-1 with a 96% capacity retention after 800 cycles at a current rate of 1 A g^-1 and a brilliant rate performance (49% capacity maintenance with the current variation from 0.1 to 5 A g^-1). Absolutely, these outstanding characteristics are ascribed to the unique structure. The N-doped carbon fibers outside not only prevent the volume expansion during Li⁺ intercalation/extraction but also improve the electron transport in the electrode. Most significantly, the hollow structure offers enough vacant space to buffer the internal strain, while the porous structure shortens the Li⁺ diffusion distance. Combined with electrospinning technology, this study shares a novel idea for designing various composites with rational structures and outstanding electrochemical properties.