51
|
Doshi M, Zhang J, Fahrenthold EP. Eddy Current Measurement of Chemiresistive Sensing Transients in Graphene-hBN Heterostructures. ACS Sens 2023; 8:122-132. [PMID: 36583657 DOI: 10.1021/acssensors.2c01845] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
The development of graphene-based electronic and gas sensing devices has motivated considerable research interest in the properties of graphene-hBN heterostructures. Eddy current measurements of the sheet conductance of graphene-hBN heterostructures show a relatively low conductance, as compared to results previously reported in the literature, all of which were obtained using contact-based measurement methods. Chemiresistive measurements of the graphene-hBN heterostructure response to oxygen adsorption, including hysteric effects under transient multicycle loading, show that the incremental sheet conductance responses of graphene and graphene-hBN sensors differ in sign. A transient, nonlinear, history dependent constitutive model of graphene-hBN response to oxygen adsorption distinguishes stochastic variations in material properties from deterministic variations in sensor performance. The deterministic variations are due to sensing process hysteresis, a phenomenon of central interest in the development of graphene-based sensor systems.
Collapse
Affiliation(s)
- Manasi Doshi
- Department of Mechanical Engineering, University of Texas, Austin, Texas78712, United States
| | - Jie Zhang
- Department of Mechanical Engineering, University of Texas, Austin, Texas78712, United States
| | - Eric P Fahrenthold
- Department of Mechanical Engineering, University of Texas, Austin, Texas78712, United States
| |
Collapse
|
52
|
Ma T, Zhang J, Zhang L, Zhang Q, Xu X, Xiong Y, Ying Y, Fu Y. Recent advances in determination applications of emerging films based on nanomaterials. Adv Colloid Interface Sci 2023; 311:102828. [PMID: 36587470 DOI: 10.1016/j.cis.2022.102828] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2022] [Revised: 12/12/2022] [Accepted: 12/22/2022] [Indexed: 12/28/2022]
Abstract
Sensitive and facile detection of analytes is crucial in various fields such as agriculture production, food safety, clinical diagnosis and therapy, and environmental monitoring. However, the synergy of complicated sample pretreatment and detection is an urgent challenge. By integrating the inherent porosity, processability and flexibility of films and the diversified merits of nanomaterials, nanomaterial-based films have evolved as preferred candidates to meet the above challenge. Recent years have witnessed the flourishment of films-based detection technologies due to their unique porous structures and integrated physical/chemical merits, which favors the separation/collection and detection of analytes in a rapid, efficient and facile way. In particular, films based on nanomaterials consisting of 0D metal-organic framework particles, 1D nanofibers and carbon nanotubes, and 2D graphene and analogs have drawn increasing attention due to incorporating new properties from nanomaterials. This paper summarizes the progress of the fabrication of emerging films based on nanomaterials and their detection applications in recent five years, focusing on typical electrochemical and optical methods. Some new interesting applications, such as point-of-care testing, wearable devices and detection chips, are proposed and emphasized. This review will provide insights into the integration and processability of films based on nanomaterials, thus stimulate further contributions towards films based on nanomaterials for high-performance analytical-chemistry-related applications.
Collapse
Affiliation(s)
- Tongtong Ma
- College of Biosystems Engineering and Food Science, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Zhejiang University, Hangzhou 310058, China
| | - Jie Zhang
- College of Biosystems Engineering and Food Science, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Zhejiang University, Hangzhou 310058, China
| | - Lin Zhang
- College of Biosystems Engineering and Food Science, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Zhejiang University, Hangzhou 310058, China
| | - Qi Zhang
- College of Biosystems Engineering and Food Science, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Zhejiang University, Hangzhou 310058, China
| | - Xiahong Xu
- State Key Laboratory for Managing Biotic and Chemical Threats to the Quality and Safety of Agro-products, Institute of Agro-product Safety and Nutrition, Zhejiang Academy of Agricultural Sciences, Hangzhou 310021, China.
| | - Yonghua Xiong
- State Key Laboratory of Food Science and Technology, School of Food Science and Technology, Nanchang University, Nanchang 330047, China
| | - Yibin Ying
- College of Biosystems Engineering and Food Science, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Zhejiang University, Hangzhou 310058, China
| | - Yingchun Fu
- College of Biosystems Engineering and Food Science, Key Laboratory of Intelligent Equipment and Robotics for Agriculture of Zhejiang Province, Zhejiang University, Hangzhou 310058, China.
| |
Collapse
|
53
|
Ultrathin coordination polymer nanosheets modified with carbon quantum dots for ultrasensitive ammonia sensors. J Colloid Interface Sci 2023; 630:776-785. [DOI: 10.1016/j.jcis.2022.10.059] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/25/2022] [Revised: 10/08/2022] [Accepted: 10/13/2022] [Indexed: 11/09/2022]
|
54
|
Koli PB, Birari MD, Ahire SA, Shinde SG, Ingale RS, Patil IJ. Ferroso-ferric oxide (Fe3O4) embedded g-C3N4 nanocomposite sensor fabricated by photolithographic technique for environmental pollutant gas sensing and relative humidity characteristics. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.110083] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
|
55
|
Zhao H, Hong L, Han K, Yang M, Li Y. In situ prepared composite of polypyrrole and multi-walled carbon nanotubes grafted with sodium polystyrenesulfonate as ammonia gas sensor with wide detection range. JOURNAL OF POLYMER ENGINEERING 2022. [DOI: 10.1515/polyeng-2022-0106] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
Abstract
NH3 gas sensors with good sensing performance including wide detection range at room temperature are highly desirable for a large variety of applications. In this work, multi-walled carbon nanotubes grafted with sodium polystyrenesulfonate (PSSNa-MWCNTs) are prepared via a controlled radical polymerization and show good dispersibility in water. The composite of polypyrrole with PSSNa-MWCNTs (PPy/PSSNa-MWCNT) is prepared by in situ vapor phase polymerization of pyrrole to fabricate NH3 gas sensors. Effects of the content of PSSNa-MWCNTs, the concentration of the oxidant, polymerization time and temperature on the gas sensing properties of the composite are investigated at room temperature. It is revealed that the composite shows much higher response magnitude than the single components. Under optimal conditions, PPy/PSSNa-MWCNT exhibits very wide detection range from 5 to 2000 ppm, and good sensing linearity over 5–20 ppm and 20–100 ppm, respectively. Moreover, the electrical responses of the composite towards NH3 gas are fast (response and recovery time to 1000 ppm NH3 gas are 16.7 s and 143.6 s, respectively), reproducible and highly selective. The interactions between PPy and MWCNTs promote the charge transfer in the composite, leading to good sensing performance and exhibiting a synergetic effect.
Collapse
Affiliation(s)
- Huijie Zhao
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Lijie Hong
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Kaiyue Han
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Mujie Yang
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| | - Yang Li
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering , Zhejiang University , Hangzhou 310027 , China
| |
Collapse
|
56
|
Wu P, Li Y, Xiao S, Chen D, Chen J, Tang J, Zhang X. Room-Temperature Detection of Perfluoroisobutyronitrile with SnO 2/Ti 3C 2T x Gas Sensors. ACS APPLIED MATERIALS & INTERFACES 2022; 14:48200-48211. [PMID: 36226794 DOI: 10.1021/acsami.2c11216] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/16/2023]
Abstract
Ti3C2Tx MXene is an emerging two-dimensional transition-metal carbide/nitride with excellent properties of large specific surface and high carrier mobility for room-temperature gas sensing. However, achieving high sensitivity and long-term stability of pristine Ti3C2Tx-based gas sensors remains challenging. SnO2 is a typical semiconductor metal oxide with high reaction activity and stable chemical properties ideal for a dopant that can comprehensively improve sensing performance. Ti3C2Tx and SnO2 are investigated for the first time in this study as functional materials for hybridization and room-temperature detection of the gas insulating medium fluorinated nitrile (C4F7N) with microtoxicity. A Ti3C2Tx-SnO2 nanocomposite sensor exhibits superior sensitivity, high selectivity, strong anti-interference ability, and excellent long-term stability. The enhanced sensing mechanism is ascribed to the synergistic effect between SnO2 and Ti3C2Tx and the strong adsorption ability of SnO2 to C4F7N similar to bait for fish. We also established an actual leakage scene and demonstrated the feasibility of the Ti3C2Tx-SnO2 sensor to provide distribution rules with high sensing efficiency for actual engineering applications. The results of this work can expand the gas sensing application of Ti3C2Tx MXene and provide a reference for maintaining C4F7N-based eco-friendly gas-insulated equipment.
Collapse
Affiliation(s)
- Peng Wu
- School of Electrical Engineering and Automation, Wuhan University, Wuhan430072, China
| | - Yi Li
- School of Electrical Engineering and Automation, Wuhan University, Wuhan430072, China
| | - Song Xiao
- School of Electrical Engineering and Automation, Wuhan University, Wuhan430072, China
| | - Dachang Chen
- School of electrical and electronic engineering, Wuhan Polytechnic University, Wuhan430023, China
| | - Junyi Chen
- School of Electrical Engineering and Automation, Wuhan University, Wuhan430072, China
| | - Ju Tang
- School of Electrical Engineering and Automation, Wuhan University, Wuhan430072, China
| | - Xiaoxing Zhang
- Hubei Key Laboratory for High-efficiency Utilization of Solar Energy and Operation Control of Energy Storage System, Hubei University of Technology, Wuhan430068, China
- State Key Laboratory of Power Transmission Equipment & System Security and New Technology, Chongqing University, Chongqing400044, China
| |
Collapse
|
57
|
Rafat MN, Joo YJ, Cho KY, Park SY, Park KY, Oh WC. Comparative and Efficient Ammonia Gas Sensing Study with Self-assembly-Synthesized Metal Oxide-SiC Fiber-Based Mesoporous SiO 2 Composites. ACS OMEGA 2022; 7:37933-37942. [PMID: 36312354 PMCID: PMC9609073 DOI: 10.1021/acsomega.2c05099] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 08/09/2022] [Accepted: 09/23/2022] [Indexed: 06/16/2023]
Abstract
Self-assembled-assisted ternary nanocomposite In2O3-SiC, CuO2-SiC, and MnO2-SiC semiconductors were mixed with SiO2 to enable gas sensing using cyclic voltammetry. The results of TEM (transm In2O3-SiC-SiO2 ion electron microscopy), X-ray diffraction spectroscopy, and Raman spectra analysis affirm the closeness of few layers between SiO2 and SiC in In2O3-SiC, MnO2-SiC, and CuO2-SiC. Among the electrochemical impedance spectra curves of the nanocomposites, none of the samples had a semicircle profile, which indicates the existence of a higher charge-transfer resistivity behavior between the electrolyte and the sample electrode with charge carrier and transport effects, which is related to the well-developed porous structure of synthesized composites. CuO2-SiC-SiO2 and MnO2-SiC-SiO2 showed high resistivity and a quite significant response for NH3 gas at room temperature. While there was a response for NH3 gas for In2O3-SiC-SiO2, the sensor showed a low response for the gas. From the sensing test, correspondences between the chemical structure of the sensor and the molecular structure of the gases have been found. The surface reactions between the sensor surface and the gas with a pore structure, along with the electron receiver/donor phase are observed from the results of gas sensor tests, and all factors are determining the precise state. Finally, the adsorption of NH3 molecules and the alteration of the electronic resistance of In2O3-SiC-SiO2, MnO2-SiC-SiO2, and CuO2-SiC-SiO2 were presented that include various thicknesses of charge to represent which are achieved by the connection with the substrates and the particles.
Collapse
Affiliation(s)
- Md Nazmodduha Rafat
- Department
of Advanced Materials Science & Engineering, Hanseo University, Seosan-si, Chungnam 356-706, Korea
| | - Young Jun Joo
- Korea
Institutes of Ceramic Engineering and Technology, Soho-ro, Jinju-Si, Gyeongsangnam-do 52851, South
Korea
| | - Kwang Youn Cho
- Korea
Institutes of Ceramic Engineering and Technology, Soho-ro, Jinju-Si, Gyeongsangnam-do 52851, South
Korea
| | - Sang Yul Park
- Daeho
I&T, Changwon-si, Gyeongsangnam-do 51338, Korea
| | | | - Won-Chun Oh
- Department
of Advanced Materials Science & Engineering, Hanseo University, Seosan-si, Chungnam 356-706, Korea
- College
of Materials Science and Engineering, Anhui
University of Science & Technology, Huainan 232001, P. R. China
| |
Collapse
|
58
|
Zhang W, Zhao J, Cai C, Qin Y, Meng X, Liu Y, Nie S. Gas-Sensitive Cellulosic Triboelectric Materials for Self-Powered Ammonia Sensing. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2203428. [PMID: 36026574 PMCID: PMC9596830 DOI: 10.1002/advs.202203428] [Citation(s) in RCA: 12] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/13/2022] [Revised: 07/31/2022] [Indexed: 05/26/2023]
Abstract
Gas-sensitive materials are capable of dynamic identification and content monitoring of specific gases in the environment, and their applications in the field of gas sensing are promising. However, weak adsorption properties are the main challenge limiting the application of gas-sensitive materials. A highly adsorbent gas-sensitive cellulose nanofibril (CNF)-based triboelectric material with a layered structure is prepared here and it is applied to self-powered gas sensing. The layered structure of the triethoxy-1H,1H,2H,2H-tridecafluoro-n-octylsilane cellulose nanofiber (PFOTES-CNF)-based gas-sensitive material further enhances the adsorption of the material due to electrostatic adsorption in the electrostatic field induced by triboelectricity. It is found that the ammonia-sensitive material obtained by loading Ti3 C2 Tx in PFOTES-CNF has a fast response/recovery (12/14 s), high sensitivity response (Vair /Vgas = 2.1), high selectivity response (37.6%), and low detection limit (10 ppm) for 100 ppm of ammonia gas. In addition, the ammonia-sensitive CNF-based triboelectric material can accurately identify NH3 concentration changes in the range of 10-120 ppm and transmit the signal wirelessly to the user interface, facilitating real-time online monitoring of NH3 in the environment. A novel strategy is provided here for designing and preparing high-performance gas-sensitive composites and the analysis of self-powered gas sensing is guided.
Collapse
Affiliation(s)
- Wanglin Zhang
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| | - Jiamin Zhao
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| | - Chenchen Cai
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| | - Ying Qin
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| | - Xiangjiang Meng
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| | - Yanhua Liu
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| | - Shuangxi Nie
- School of Light Industry and Food EngineeringGuangxi UniversityNanning530004P. R. China
| |
Collapse
|
59
|
Sun L, Rotaru A, Garcia Y. A non-porous Fe(II) complex for the colorimetric detection of hazardous gases and the monitoring of meat freshness. JOURNAL OF HAZARDOUS MATERIALS 2022; 437:129364. [PMID: 35728324 DOI: 10.1016/j.jhazmat.2022.129364] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/20/2021] [Revised: 06/02/2022] [Accepted: 06/09/2022] [Indexed: 06/15/2023]
Abstract
Food quality monitoring and freshness assessment are critical for ensuring food safety at a large scale. Ammonia is used as an important indicator of protein rich food spoilage state. However, current ammonia gas sensors suffer from insufficient sensitivity and selectivity, or sophisticated instrumentation, hindering their practical application in in-situ and real-time food quality monitoring. To overcome such limitations, an innovative nonporous colorimetric complex 1 has been synthesized and investigated for the detection of NH3(g) and its volatile organic derivatives including aliphatic amines, 1,2-diaminopropane(g), isobutylamine(g) and ethylenediamine(g), etc. The sensor operates colorimetrically at room temperature without energy input, with a detection limit to ammonia(g) of 105 ppb, and show excellent reusability. The colorimetric detection mechanism involves a partial spin state change of Fe(II) ions upon exposure to amines in the gas phase. In addition, the complex was utilized as real-time monitoring of meat freshness using a smartphone. Thus, chemosensor 1 is considered as a ground breaking new-generation portable electronic nose for vapors of volatile organic compounds discrimination at room temperature.
Collapse
Affiliation(s)
- Li Sun
- Institute of Condensed Matter and Nanosciences, Molecular Chemistry, Materials and Catalysis (IMCN/MOST), Université catholique de Louvain, Louvain-la-Neuve 1348, Belgium
| | - Aurelian Rotaru
- Department of Electrical Engineering and Computer Science and MANSiD Research Center, "Stefan cel Mare" University, University Street, 13, Suceava 720229, Romania
| | - Yann Garcia
- Institute of Condensed Matter and Nanosciences, Molecular Chemistry, Materials and Catalysis (IMCN/MOST), Université catholique de Louvain, Louvain-la-Neuve 1348, Belgium.
| |
Collapse
|
60
|
An ultra-sensitive smartphone-integrated digital colorimetric and electrochemical Camellia sinensis polyphenols encapsulated CuO nanoparticles-based ammonia biosensor. INORG CHEM COMMUN 2022. [DOI: 10.1016/j.inoche.2022.109733] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/22/2022]
|
61
|
Wang Z, Zhu L, Wang J, Zhuang R, Mu P, Wang J, Yan W. Advances in functional guest materials for resistive gas sensors. RSC Adv 2022; 12:24614-24632. [PMID: 36128383 PMCID: PMC9426293 DOI: 10.1039/d2ra04063h] [Citation(s) in RCA: 7] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/01/2022] [Accepted: 07/29/2022] [Indexed: 12/02/2022] Open
Abstract
Resistive gas sensors are considered promising candidates for gas detection, benefiting from their small size, ease of fabrication and operation convenience. The development history, performance index, device type and common host materials (metal oxide semiconductors, conductive polymers, carbon-based materials and transition metal dichalcogenides) of resistive gas sensors are firstly reviewed. This review systematically summarizes the functions, functional mechanisms, features and applications of seven kinds of guest materials (noble metals, metal heteroatoms, metal oxides, metal-organic frameworks, transition metal dichalcogenides, polymers, and multiple guest materials) used for the modification and optimization of the host materials. The introduction of guest materials enables synergistic effects and complementary advantages, introduces catalytic sites, constructs heterojunctions, promotes charge transfer, improves carrier transport, or introduces protective/sieving/enrichment layers, thereby effectively improving the sensitivity, selectivity and stability of the gas sensors. The perspectives and challenges regarding the host-guest hybrid materials-based gas sensors are also discussed.
Collapse
Affiliation(s)
- Ze Wang
- Department of Environmental Science and Engineering, Xi'an Key Laboratory of Solid Waste Recycling and Resource Recovery, State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University 28 Xianning West Road Xi'an 710049 China
| | - Lei Zhu
- Department of Environmental Science and Engineering, Xi'an Key Laboratory of Solid Waste Recycling and Resource Recovery, State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University 28 Xianning West Road Xi'an 710049 China
- School of Physics and Electrical Engineering, Weinan Normal University Chaoyang Street Weinan 714099 China
| | - Jingzhao Wang
- Department of Environmental Science and Engineering, Xi'an Key Laboratory of Solid Waste Recycling and Resource Recovery, State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University 28 Xianning West Road Xi'an 710049 China
| | - Rui Zhuang
- Chambroad Chemical Industry Institute Co.,Ltd Boxing Economic Development Zone 256500 Shandong Province China
| | - Pengfei Mu
- Chambroad Chemical Industry Institute Co.,Ltd Boxing Economic Development Zone 256500 Shandong Province China
| | - Jianan Wang
- Department of Environmental Science and Engineering, Xi'an Key Laboratory of Solid Waste Recycling and Resource Recovery, State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University 28 Xianning West Road Xi'an 710049 China
| | - Wei Yan
- Department of Environmental Science and Engineering, Xi'an Key Laboratory of Solid Waste Recycling and Resource Recovery, State Key Laboratory of Multiphase Flow in Power Engineering, School of Energy and Power Engineering, Xi'an Jiaotong University 28 Xianning West Road Xi'an 710049 China
| |
Collapse
|
62
|
Andre RS, Mercante LA, Facure MHM, Sanfelice RC, Fugikawa-Santos L, Swager TM, Correa DS. Recent Progress in Amine Gas Sensors for Food Quality Monitoring: Novel Architectures for Sensing Materials and Systems. ACS Sens 2022; 7:2104-2131. [PMID: 35914109 DOI: 10.1021/acssensors.2c00639] [Citation(s) in RCA: 38] [Impact Index Per Article: 19.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/14/2022]
Abstract
The increasing demand for food production has necessitated the development of sensitive and reliable methods of analysis, which allow for the optimization of storage and distribution while ensuring food safety. Methods to quantify and monitor volatile and biogenic amines are key to minimizing the waste of high-protein foods and to enable the safe consumption of fresh products. Novel materials and device designs have allowed the development of portable and reliable sensors that make use of different transduction methods for amine detection and food quality monitoring. Herein, we review the past decade's advances in volatile amine sensors for food quality monitoring. First, the role of volatile and biogenic amines as a food-quality index is presented. Moreover, a comprehensive overview of the distinct amine gas sensors is provided according to the transduction method, operation strategies, and distinct materials (e.g., metal oxide semiconductors, conjugated polymers, carbon nanotubes, graphene and its derivatives, transition metal dichalcogenides, metal organic frameworks, MXenes, quantum dots, and dyes, among others) employed in each case. These include chemoresistive, fluorometric, colorimetric, and microgravimetric sensors. Emphasis is also given to sensor arrays that record the food quality fingerprints and wireless devices that operate as radiofrequency identification (RFID) tags. Finally, challenges and future opportunities on the development of new amine sensors are presented aiming to encourage further research and technological development of reliable, integrated, and remotely accessible devices for food-quality monitoring.
Collapse
Affiliation(s)
- Rafaela S Andre
- Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, São Paulo, Brazil
| | - Luiza A Mercante
- Institute of Chemistry, Federal University of Bahia (UFBA), 40170-280, Salvador, Bahia, Brazil
| | - Murilo H M Facure
- Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, São Paulo, Brazil.,PPGQ, Department of Chemistry, Center for Exact Sciences and Technology, Federal University of Sao Carlos (UFSCar), 13565-905, Sao Carlos, São Paulo, Brazil
| | - Rafaela C Sanfelice
- Science and Technology Institute, Federal University of Alfenas, 37715-400, Poços de Caldas, Minas Gerais, Brazil
| | - Lucas Fugikawa-Santos
- São Paulo State University - UNESP, Institute of Geosciences and Exact Sciences, 13506-700, Rio Claro, São Paulo, Brazil
| | - Timothy M Swager
- Department of Chemistry and Institute for Soldier Nanotechnologies, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Daniel S Correa
- Nanotechnology National Laboratory for Agriculture (LNNA), Embrapa Instrumentação, 13560-970, Sao Carlos, São Paulo, Brazil.,PPGQ, Department of Chemistry, Center for Exact Sciences and Technology, Federal University of Sao Carlos (UFSCar), 13565-905, Sao Carlos, São Paulo, Brazil
| |
Collapse
|
63
|
Bhargava Reddy MS, Kailasa S, Marupalli BCG, Sadasivuni KK, Aich S. A Family of 2D-MXenes: Synthesis, Properties, and Gas Sensing Applications. ACS Sens 2022; 7:2132-2163. [PMID: 35972775 DOI: 10.1021/acssensors.2c01046] [Citation(s) in RCA: 21] [Impact Index Per Article: 10.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/17/2022]
Abstract
Gas sensors, capable of detecting and monitoring trace amounts of gas molecules or volatile organic compounds (VOCs), are in great demand for numerous applications including diagnosing diseases through breath analysis, environmental and personal safety, food and agriculture, and other fields. The continuous emergence of new materials is one of the driving forces for the development of gas sensors. Recently, 2D materials have been gaining huge attention for gas sensing applications, owing to their superior electrical, optical, and mechanical characteristics. Especially for 2D MXenes, high specific area and their rich surface functionalities with tunable electronic structure make them compelling for sensing applications. This Review discusses the latest advancements in the 2D MXenes for gas sensing applications. It starts by briefly explaining the family of MXenes, their synthesis methods, and delamination procedures. Subsequently, it outlines the properties of MXenes. Then it describes the theoretical and experimental aspects of the MXenes-based gas sensors. Discussion is also extended to the relation between sensing performance and the structure, electronic properties, and surface chemistry. Moreover, it highlights the promising potential of these materials in the current gas sensing applications and finally it concludes with the limitations, challenges, and future prospects of 2D MXenes in gas sensing applications.
Collapse
Affiliation(s)
- M Sai Bhargava Reddy
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal, India
| | - Saraswathi Kailasa
- Department of Physics, National Institute of Technology, Warangal, 506004, India
| | - Bharat C G Marupalli
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal, India
| | | | - Shampa Aich
- Department of Metallurgical and Materials Engineering, Indian Institute of Technology Kharagpur, Kharagpur 721302, West Bengal, India
| |
Collapse
|
64
|
Yang Y, Gong W, Li X, Liu Y, Liang Y, Chen B, Yang Y, Luo X, Xu K, Yuan C. Light-assisted room temperature gas sensing performance and mechanism of direct Z-scheme MoS 2/SnO 2 crystal faceted heterojunctions. JOURNAL OF HAZARDOUS MATERIALS 2022; 436:129246. [PMID: 35739765 DOI: 10.1016/j.jhazmat.2022.129246] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 04/13/2022] [Revised: 05/12/2022] [Accepted: 05/25/2022] [Indexed: 06/15/2023]
Abstract
Light assistance and construction of heterojunctions are both promising means to improve the room temperature gas sensing performance of MoS2 recently. However, enhancing the separation efficiency of photo-generated carriers at interface and adsorption ability of surface have become the bottleneck problem to further improve the room temperature gas sensing performance of MoS2-based heterojunctions under light assistance. In the present study, a novel direct Z-scheme MoS2/SnO2 heterojunction was designed through crystal facets engineering and its room temperature gas sensing properties under light assistance was studied. It was found that the heterojunction showed outstanding room temperature NO2 sensing performance with a high response of 208.66 toward 10 ppm NO2, together with excellent recovery characteristics and selectivity. The gas sensing mechanism study suggested that high-energy {221} crystal facets of SnO2 and MoS2 directly formed Z-scheme heterojunction, which could greatly improve the separation efficiency of photo-generated carriers with high redox capacity. Moreover, {221} facets greatly enhanced adsorption ability towards NO2. This work not only opens up the application of Z-scheme heterojunctions in gas sensing, which will greatly promotes the development of room temperature light-assisted gas sensors, but also provides a new idea for the construction of direct Z-scheme heterojunctions through crystal facets engineering.
Collapse
Affiliation(s)
- Yong Yang
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China.
| | - Wufei Gong
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China
| | - Xin Li
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China
| | - Yuan Liu
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China
| | - Yan Liang
- Department of Artificial Intelligence, Jiangxi University of Technology, Nanchang 330022, Jiangxi, PR China
| | - Bin Chen
- Key Laboratory of Materials Physics and Anhui Key Laboratory of Nanomaterials and Nanotechnology, Institute of Solid State Physics, HFIPS, Chinese Academy of Sciences, Hefei 230031, PR China; Hefei National Laboratory for Physical Sciences at the Microscale, University of Science and Technology of China, Hefei 230026, PR China
| | - Yanxing Yang
- Department of Physics, New Jersey Institute of Technology, Newark, NJ 07102-1982, USA
| | - Xingfang Luo
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China
| | - Keng Xu
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China
| | - Cailei Yuan
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330098, Jiangxi, PR China
| |
Collapse
|
65
|
Choi J, Chacon B, Park H, Hantanasirisakul K, Kim T, Shevchuk K, Lee J, Kang H, Cho SY, Kim J, Gogotsi Y, Kim SJ, Jung HT. N-p-Conductor Transition of Gas Sensing Behaviors in Mo 2CT x MXene. ACS Sens 2022; 7:2225-2234. [PMID: 35838305 DOI: 10.1021/acssensors.2c00658] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/18/2022]
Abstract
It is highly important to implement various semiconducting, such as n- or p-type, or conducting types of sensing behaviors to maximize the selectivity of gas sensors. To achieve this, researchers so far have utilized the n-p (or p-n) two-phase transition using doping techniques, where the addition of an extra transition phase provides the potential to greatly increase the sensing performance. Here, we report for the first time on an n-p-conductor three-phase transition of gas sensing behavior using Mo2CTx MXene, where the presence of organic intercalants and film thickness play a critical role. We found that 5-nm-thick Mo2CTx films with a tetramethylammonium hydroxide (TMAOH) intercalant displayed a p-type gas sensing response, while the films without the intercalant displayed a clear n-type response. Additionally, Mo2CTx films with thicknesses over 700 nm exhibited a conductor-type response, unlike the thinner films. It is expected that the three-phase transition was possible due to the unique and simultaneous presence of the intrinsic metallic conductivity and the high-density of surface functional groups of the MXene. We demonstrate that the gas response of Mo2CTx films containing tetramethylammonium (TMA) ions toward volatile organic compounds (VOCs), NH3, and NO2 is ∼30 times higher than that of deintercalated films, further showing the influence of intercalants on sensing performance. Also, DFT calculations show that the adsorption energy of NH3 and NO2 on Mo2CTx shifts from -0.973, -1.838 eV to -1.305, -2.750 eV, respectively, after TMA adsorption, demonstrating the influence of TMA in enhancing sensing performance.
Collapse
Affiliation(s)
- Junghoon Choi
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Benjamin Chacon
- A. J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia PA 19104, United States
| | - Hyunsoo Park
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Kanit Hantanasirisakul
- A. J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia PA 19104, United States
| | - Taewoo Kim
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Kateryna Shevchuk
- A. J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia PA 19104, United States
| | - Juyun Lee
- Materials Architecturing Research Center, Korea Institute of Science and Technology, 5, Hwarang-ro 14-gil, Seongbuk-gu, Seoul 02792, Republic of Korea.,Department of Materials Science and Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 02841, Republic of Korea
| | - Hohyung Kang
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Soo-Yeon Cho
- School of Chemical Engineering, Sungkyunkwan University, 2066 Seobu-ro, Suwon 16419, Republic of Korea
| | - Jihan Kim
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| | - Yury Gogotsi
- A. J. Drexel Nanomaterials Institute and Department of Materials Science and Engineering, Drexel University, Philadelphia PA 19104, United States
| | - Seon Joon Kim
- Division of Nanoscience and Technology, KIST School, University of Science and Technology, 5, Hwarang-ro 14-gil, Seongbuk-gu, Seoul 02792, Republic of Korea.,Materials Architecturing Research Center and Convergence Research Center for Solutions to Electromagnetic Interference for Future-Mobility, Korea Institute of Science and Technology, 5, Hwarang-ro 14-gil, Seongbuk-gu, Seoul 02792, Republic of Korea
| | - Hee-Tae Jung
- Department of Chemical and Biomolecular Engineering, Korea Advanced Institute of Science and Technology, 291, Daehak-ro, Yuseong-gu, Daejeon 34141, Republic of Korea
| |
Collapse
|
66
|
|
67
|
Patra I, Madjeed Kammoud K, Haleem Al-Qaim Z, Mamadoliev II, Abed Jawad M, Hammid AT, Salam Karim Y, Yasin G. Perspectives and Trends in Advanced MXenes-Based Optical Biosensors for the Recognition of Food Contaminants. Crit Rev Anal Chem 2022; 54:633-652. [PMID: 35749278 DOI: 10.1080/10408347.2022.2091921] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/17/2022]
Abstract
Fabricating novel biosensing constructs with high sensitivity and selectivity is highly demanded in food contaminants detection. In this prospect, various nanostructured materials were envisaged to build (bio)sensors with superior sensitivity and selectivity. The desirable biocompatibility, brilliant mechanical strength, ease of surface functionalization, as well as tunable optical and electronic features, portray 2D MXenes as versatile scaffolds for biosensing. In this review, we overviewed the state-of-the-art MXenes-based optical biosensing devices to detect mycotoxins, pesticide residues, antibiotic residues, and food borne-pathogens from foodstuff and environmental matrices. Firstly, the synthesis methods and surface functionalization/modification of MXenes are discussed. Secondly, according to the target analytes, we categorized and presented a detailed account of the newest research progress of MXenes-based optical probes for food contaminants monitoring. The efficiency of all the surveyed probes was assessed on the basis of important factors like response time, detection limit (DL), and sensing range. Lastly, the necessity and requirements for future advances in this emerging MXenes material are also given, followed by challenges and opportunities. We hope that this study will bridge the gap between nanotechnology and food science, offering insights for engineers or scientists in both areas to accelerate the progress of MXenes-based materials for food safety detection.
Collapse
Affiliation(s)
| | | | | | | | | | - Ali Thaeer Hammid
- Computer Engineering Techniques Department, Faculty of Information Technology, Imam Ja'afar Al-Sadiq University, Baghdad, Iraq
| | | | - Ghulam Yasin
- Department of Botany, university of Bahauddin Zakariya, Multan, Pakistan
| |
Collapse
|
68
|
Xu K, Gao J, Chen P, Zhan C, Yang Y, Wang Z, Yang Y, Yang L, Yuan C. Interface Engineering of Fe 2O 3@Co 3O 4 Nanocubes for Enhanced Triethylamine Sensing Performance. Ind Eng Chem Res 2022. [DOI: 10.1021/acs.iecr.2c01145] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Keng Xu
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330022, Jiangxi, P. R. China
| | - Jiyun Gao
- Faculty of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China
- College of Chemistry and Environment, Yunnan Min Zu University, Kunming 650500, China
| | - Panfeng Chen
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330022, Jiangxi, P. R. China
| | - Chenyong Zhan
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330022, Jiangxi, P. R. China
| | - Yanxing Yang
- Physics Department, New Jersey Institute of Technology, Newark, New Jersey 07102-1982 United States
| | - Zhipeng Wang
- Institute of Advanced Materials, College of Chemistry and Chemical Engineering, Jiangxi Normal University, 99 Ziyang Avenue, Nanchang 330022, Jiangxi Province, China
| | - Yong Yang
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330022, Jiangxi, P. R. China
| | - Li Yang
- Physics Department, New Jersey Institute of Technology, Newark, New Jersey 07102-1982 United States
| | - Cailei Yuan
- Jiangxi Key Laboratory of Nanomaterials and Sensors, Jiangxi Key Laboratory of Photoelectronics and Telecommunication, School of Physics, Communication and Electronics, Jiangxi Normal University, Nanchang 330022, Jiangxi, P. R. China
| |
Collapse
|
69
|
Joshi N, Pransu G, Adam Conte-Junior C. Critical review and recent advances of 2D materials-Based gas sensors for food spoilage detection. Crit Rev Food Sci Nutr 2022; 63:10536-10559. [PMID: 35647714 DOI: 10.1080/10408398.2022.2078950] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
Many people around the world are concerned about meat safety and quality, which has resulted in the ongoing advancement of packaged food technology. Since the emergence of graphene in 2004, the number of studies on layered two-dimensional materials (2DMs) for applications ranging from food packaging to meat quality monitoring has been expanding quickly. Recently, scientists have been working hard to develop a novel class of 2DMs that keep the good things about graphene but don't have zero bandgaps at room temperature. Much work has been done on layered transition metal dichalcogenides (TMDCs) like different metal sulfides and selenides for meat spoilage gas sensors. This review looks at (i) the main indicators of meat spoilage and (ii) the detection methods that can be used to find out if meat has been spoiled, such as chemiresistive, electrochemical, and optical methods. (iii) the role of 2DMs in meat spoilage detection and (iv) the emergence of advanced methods for selective classification of target analytes in meat/food spoilage detection in recent years. Thus, this review demonstrates the potential scope of 2DMs for developing intelligent sensor systems for food and meat spoilage detection with high viability, simplicity, cost-effectiveness, and other multipurpose tools.
Collapse
Affiliation(s)
- Nirav Joshi
- Physics Department, Federal University of ABC, Campus Santo André, Brazil
- Center for Food Analysis (NAL), Technological Development Support Laboratory (LADETEC), Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, Brazil
- Laboratory of Advanced Analysis in Biochemistry and Molecular Biology (LAABBM), Department of Biochemistry, Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, Brazil
| | - Gaurav Pransu
- Graphene Research Labs, Manchappanahosahalli, Karnataka, India
| | - Carlos Adam Conte-Junior
- Center for Food Analysis (NAL), Technological Development Support Laboratory (LADETEC), Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, Brazil
- Laboratory of Advanced Analysis in Biochemistry and Molecular Biology (LAABBM), Department of Biochemistry, Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro, Brazil
- Nanotechnology Network, Carlos Chagas Filho Research Support Foundation of the State of Rio de Janeiro (FAPERJ), Rio de Janeiro, Brazil
- Post-Graduation Program of Chemistry (PGQu), Institute of Chemistry (IQ), Federal University of Rio de Janeiro (UFRJ), Cidade Universitária, Rio de Janeiro, Brazil
- Post-Graduation Program of Veterinary Hygiene (PPGHV) Faculty of Veterinary Medicine, Fluminense Federal University (UFF), Niterói, Brazil
| |
Collapse
|
70
|
Wang Y, Borgatta J, White JC. Protecting foods with biopolymer fibres. NATURE FOOD 2022; 3:402-403. [PMID: 37118041 DOI: 10.1038/s43016-022-00519-6] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/30/2023]
Affiliation(s)
- Yi Wang
- Connecticut Agricultural Experiment Station, New Haven, CT, USA
| | - Jaya Borgatta
- Connecticut Agricultural Experiment Station, New Haven, CT, USA
| | - Jason C White
- Connecticut Agricultural Experiment Station, New Haven, CT, USA.
| |
Collapse
|
71
|
Zhao Q, Jiang Y, Yuan Z, Duan Z, Zhang Y, Tai H. MXene复合气敏材料: 最新进展与未来挑战. CHINESE SCIENCE BULLETIN-CHINESE 2022. [DOI: 10.1360/tb-2021-1340] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
|