Disinfection: is it time to reconsider Spaulding?

Reprocessing Standards for Medical Devices and Equipment in Otolaryngology: Safe Practices for Scopes, Speculums, and Single-Use Devices

Stringent regulatory standards for reprocessing medical devices and equipment have proliferated in response to patient safety incidents in which improperly disinfected or contaminated endoscopes lead to large-scale disease transmission or outbreaks. This article details best practices in reprocessing reusable and single-use devices in otolaryngology, with particular attention to flexible fiberoptic endoscopes/nasophyarngoscopes, nasal speculums, and other clinic and operating room instruments. High-risk devices require sterilization, whereas lower risk devices may be reprocessed using various disinfection procedures. Reprocessing practices have implications for adequacy, efficiency, and cost. Nuanced understanding of procedures and their rationale ensures delivery of safe, ethical, and quality patient care.

Experimental Study to Develop a Method for Improving Sample Collection to Monitor Laryngoscopes after Reprocessing

BACKGROUND/AIMS

The microbiological surveillance of endoscopes and automated flexible endoscope reprocessing have been proven to be two of the most difficult and controversial areas of infection control in endoscopy. The purpose of this study was to standardize a sampling method for assessing the effectiveness of standard reprocessing operating procedures for flexible fiberoptic laryngoscopes (FFLs).

METHODS

First, the sampling devices were directly inoculated with Bacillus atrophaeus spores; second, tissue non tissue (TNT) wipes were tested on artificially contaminated surfaces and on FFLs.

RESULTS

Comparison of the sponges, cellulose, and TNT wipes indicated that the TNT wipes were more effective in releasing spores (93%) than the sponges (49%) and cellulose wipes (52%). The developed protocol provides a high efficiency for both collection and extraction from the stainless steel surface (87% of the spores were removed and released) and from the FFL (85% of the spores were removed and released), with relatively low standard deviations for recovery efficiency, particularly for the analysis of the FFL.

CONCLUSION

TNT wipes are more efficient for sampling surface areas, thereby aiding in the accuracy and reproducibility of environmental surveillance.

Review of Disinfection and Sterilization - Back to the Basics

In-depth knowledge of disinfection and sterilization is a key component of infection control. Sterilization completely removes a spore, whereas disinfection cannot. Disinfectants are classified as oxidants and non-oxidants. The decision regarding which method to apply is based on Spaulding's classification. In this article, disinfection and sterilization are thoroughly reviewed, and extensive information from basic to practical points is discussed.

High-Level Disinfection of Otorhinolaryngology Clinical Instruments: An Evaluation of the Efficacy and Cost-effectiveness of Instrument Storage

Objectives

Despite increasing interest in individual instrument storage, risk of bacterial cross-contamination of otorhinolaryngology clinic instruments has not been assessed. This study is the first to determine the clinical efficacy and cost-effectiveness of standard high-level disinfection and clinic instrument storage.

Methods

To assess for cross-contamination, surveillance cultures of otorhinolaryngology clinic instruments subject to standard high-level disinfection and storage were obtained at the start and end of the outpatient clinical workday. Rate of microorganism recovery was compared with cultures of instruments stored in individual peel packs and control cultures of contaminated instruments. Based on historical clinic data, the direct allocation method of cost accounting was used to determine aggregate raw material cost and additional labor hours required to process and restock peel-packed instruments.

Results

Among 150 cultures of standard high-level disinfected and co-located clinic instruments, 3 positive bacterial cultures occurred; 100% of control cultures were positive for bacterial species ( P < .001). There was no statistical difference between surveillance cultures obtained before and after the clinic day. While there was also no significant difference in rate of contamination between peel-packed and co-located instruments, peel packing all instruments requires 6250 additional labor hours, and conservative analyses place the cost of individual semicritical instrument storage at $97,852.50 per year.

Discussion

With in vitro inoculation of >200 otorhinolaryngology clinic instruments, this study demonstrates that standard high-level disinfection and storage are equally efficacious to more time-consuming and expensive individual instrument storage protocols, such as peel packing, with regard to bacterial contamination.

Implications for Practice

Standard high-level disinfection and storage are equally effective to labor-intensive and costly individual instrument storage protocols.

Guidelines for Cleaning Transvaginal Ultrasound Transducers Between Patients

The purpose of this article is to provide guidance regarding the cleaning and disinfection of transvaginal ultrasound probes. These recommendations are also applicable to transrectal probes.

Disinfection and Sterilization in Health Care Facilities: An Overview and Current Issues

When properly used, disinfection and sterilization can ensure the safe use of invasive and noninvasive medical devices. The method of disinfection and sterilization depends on the intended use of the medical device: critical items (contact sterile tissue) must be sterilized before use; semicritical items (contact mucous membranes or nonintact skin) must be high-level disinfected; and noncritical items (contact intact skin) should receive low-level disinfection. Cleaning should always precede high-level disinfection and sterilization. Current disinfection and sterilization guidelines must be strictly followed.

Reprocessing semicritical items: Current issues and new technologies

Semicritical medical devices are defined as items that come into contact with mucous membranes or nonintact skin (eg, gastrointestinal endoscopes, endocavitary probes). Such medical devices minimally require high-level disinfection. Because many of these items are temperature sensitive, low-temperature chemical methods are usually used rather than steam sterilization. Strict adherence to current guidelines is required because more outbreaks have been linked to inadequately cleaned or disinfected endoscopes and other semicritical items undergoing high-level disinfection than any other reusable medical device.

Disinfection, sterilization, and antisepsis: An overview

All invasive procedures involve contact by a medical device or surgical instrument with a patient's sterile tissue or mucous membranes. The level of disinfection or sterilization is dependent on the intended use of the object: critical (items that contact sterile tissue such as surgical instruments), semicritical (items that contact mucous membrane such as endoscopes), and noncritical (devices that contact only intact skin such as stethoscopes) items require sterilization, high-level disinfection and low-level disinfection, respectively. Cleaning must always precede high-level disinfection and sterilization. Antiseptics are essential to infection prevention as part of a hand hygiene program as well as several other uses such as surgical hand antisepsis and pre-operative skin preparation.

Evaluation of a novel commercial quaternary ammonium compound for eradication of Mycobacteria, HCV and HBV in Egypt

Endoscopes are a common source of outbreaks of healthcare-associated infections. It is therefore important to identify high-level disinfectants capable of eliminating or killing all vegetative bacteria, mycobacteria, and viruses. Aldehydebased disinfectants are most commonly used in clinical practice but resistance has recently been detected and side effects associated with these disinfectants are well documented. In this study, we evaluated Virusolve+® EDS, a novel quaternary ammonium compound formulation supplied by Amity international, against Mycobacterium bovis (ATCC-27289), hepatitis C virus (HCV)-positive serum and hepatitis B surface antigen-positive serum. We also compared its efficacy against Cidex® (glutaraldehyde 2%), an aldehyde-based disinfectant. M. bovis showed no growth after 10 weeks with either Virusolve+® or Cidex®. Virusolve+® achieved a 10(4)- fold reduction in the initial 10(6) HCV load under clean conditions (without red blood cells) for 20 min, whereas Cidex® achieved this reduction under clean and dirty conditions (without and with red blood cells, respectively) after both 10 and 20 min. Both Virusolve+® and Cidex® were able to eradicate hepatitis B virus (HBV) infectivity under clean conditions after 10 and 20 min, whereas under dirty conditions they were only able to eradicate virus infectivity after 20 min. Virusolve+® EDS when compared with Cidex® showed equal mycobactericidal activity completely eradicating M. bovis. However, both showed comparable virucidal activity against HBV, which was more effective under clean conditions, emphasizing the importance of the cleaning step in endoscope reprocessing. Cidex® was more effective at eradicating HCV under dirty conditions after a short contact time.

APSIC Guidelines for environmental cleaning and decontamination

This document is an executive summary of APSIC Guidelines for Environmental Cleaning and Decontamination. It describes best practices in routine cleaning and decontamination in healthcare facilities as well as in specific settings e.g. management of patients with isolation precautions, food preparation areas, construction and renovation, and following a flood. It recommends the implementation of environmental hygiene program to keep the environment safe for patients, staff and visitors visiting a healthcare facility. Objective assessment of cleanliness and quality is an essential component of this program as a method for identifying quality improvement opportunities. Recommendations for safe handling of linen and bedding; as well as occupational health and safety issues are included in the guidelines. A training program is vital to ensure consistent adherence to best practices.

Susceptibility of HPV16 and 18 to high level disinfectants indicated for semi-critical ultrasound probes

Ultrasound probes used in endocavitary procedures have been shown to be contaminated with high‐risk HPV after routine use and HPV is also known to be resistant to some high level disinfectants (HLDs). This study compared efficacy of two leading ultrasound probe HLD methods; liquid ortho‐phthalaldehyde (Cidex® OPA) and an automated device using sonicated hydrogen peroxide (trophon® EPR) against HPV16 and HPV18 in a hard‐surface carrier test. Native HPV16 and HPV18 virions were generated in organotypic epithelial raft cultures. Viral lysates were dried onto carriers with a 5% (v/v) protein soil. Efficacy tests were performed against the automated device at 35% and 31.5% H₂O₂ and 0.55% OPA in quadruplicate with matched input, neutralization, and cytotoxicity controls. Hypochlorite was included as a positive control. Infectivity was determined by the abundance (qRT‐PCR) of the spliced E1^E4 transcript in infected recipient cells. The automated HLD device showed excellent efficacy against HPV16 and HPV18 (>5 log₁₀ reductions in infectivity) whereas OPA showed minimal efficacy (<0.6 log₁₀ reductions). While HPV is highly resistant to OPA, sonicated hydrogen peroxide offers an effective disinfection solution for ultrasound probes. Disinfection methods that are effective against HPV should be adopted where possible. J. Med. Virol. 88:1076–1080, 2016. © 2015 The Authors. Journal of Medical Virology Published by Wiley Periodicals, Inc.

In vitro evaluation of microbial contamination of orthodontic brackets as received from the manufacturer using microbiological and molecular tests

OBJECTIVE

To test the null hypothesis that orthodontic brackets as supplied by manufacturers do not have microbial contamination.

MATERIALS AND METHODS

The sample comprised 140 brackets of four different commercially available brands, used directly from the manufacturer's packaging, divided into 14 groups (n  =  10 brackets each). Of the 140 pieces, 60 were full cases and 80 were replacement brackets. Materials were tested to detect bacterial growth, analyze types of bacteria present (biochemical test), and identify bacteria (molecular test with polymerase chain reaction [PCR]).

RESULTS

In two of 12 groups the brackets showed microbial contamination: group 1, Morelli full case brackets, and group 12, Abzil-3M Unitek replacement brackets. Staphylococcus aureus and Staphylococcus epidermidis were the bacteria identified in groups 1 and 12, respectively (suggested by the biochemical test and confirmed by PCR).

CONCLUSIONS

Brackets of two brands (Morelli and Abzil-3M Unitek) were found to be contaminated by bacteria in the original packages supplied by the manufacturers, which suggests a risk for patient contamination. These data suggest that the manufacturers of these materials should improve the quality control of the packaging used, including sterilization, for the security of patient health.

Efflux as a glutaraldehyde resistance mechanism in Pseudomonas fluorescens and Pseudomonas aeruginosa biofilms

A major challenge in microbial biofilm control is biocide resistance. Phenotypic adaptations and physical protective effects have been historically thought to be the primary mechanisms for glutaraldehyde resistance in bacterial biofilms. Recent studies indicate the presence of genetic mechanisms for glutaraldehyde resistance, but very little is known about the contributory genetic factors. Here, we demonstrate that efflux pumps contribute to glutaraldehyde resistance in Pseudomonas fluorescens and Pseudomonas aeruginosa biofilms. The RNA-seq data show that efflux pumps and phosphonate degradation, lipid biosynthesis, and polyamine biosynthesis metabolic pathways were induced upon glutaraldehyde exposure. Furthermore, chemical inhibition of efflux pumps potentiates glutaraldehyde activity, suggesting that efflux activity contributes to glutaraldehyde resistance. Additionally, induction of known modulators of biofilm formation, including phosphonate degradation, lipid biosynthesis, and polyamine biosynthesis, may contribute to biofilm resistance and resilience. Fundamental understanding of the genetic mechanism of biocide resistance is critical for the optimization of biocide use and development of novel disinfection strategies. Our results reveal genetic components involved in glutaraldehyde resistance and a potential strategy for improved control of biofilms.

An evaluation of varying protocols for high-level disinfection of flexible fiberoptic laryngoscopes

OBJECTIVES/HYPOTHESIS

The use of flexible fiberoptic laryngoscopes (FFLs) is ubiquitous in otolaryngology practices. As with any medical device, there exists a small risk for transmission of pathogenic microorganisms between patients, necessitating high-level decontamination between uses. Most of the literature to date has studied channeled scopes such as those used in esophagogastroduodenoscopy and colonoscopy. A recent study of nonchanneled flexible laryngoscopes suggested that current high-level decontamination practices in use at some institutions, including ours, may be overly aggressive. We sought to evaluate and compare the efficacy of varying techniques of high-level disinfection of FFLs.

STUDY DESIGN

FFLs were used in routine clinical encounters and then disinfected with a variety of techniques. The FFLs were then cultured for bacteria and fungi, and the rates of positive cultures were compared between the techniques and the controls.

METHODS

In this study, we took FFLs following use in routine clinical practice and disinfected them using one of eight decontamination protocols. We compared the bacterial and fungal culture results to positive and negative controls.

RESULTS

We demonstrated that each of the eight cleaning protocols was statistically efficacious at removing bacterial contamination. Our results for fungal cultures did not reach statistical significance.

CONCLUSIONS

Using in vitro inoculation of FFLs, this study demonstrated that quicker and more cost-effective practices are equally efficacious to more time-consuming and expensive techniques with regard to bacterial contamination of FFLs.

LEVEL OF EVIDENCE

NA

A case study of a real-time evaluation of the risk of disease transmission associated with a failure to follow recommended sterilization procedures

BACKGROUND

Failures to follow recommendations for reprocessing of surgical instruments may place patients at risk for exposure to pathogenic microorganisms. When such failures occur, medical facilities often face considerable uncertainty and challenges in assessing the actual risks of disease transmission.

METHODS

In 2011, staff at an Ohio hospital determined that surgical instruments inside a Steriset Container had inadvertently been autoclaved on a gravity cycle rather than on the recommended pre-vacuum cycle, potentially exposing 72 patients who underwent surgery with the instruments to risk of infection. To provide an assessment of the level of risk, we tested the effectiveness of the machine washer/disinfector step and of the sterilization process inside the Steriset Container on the gravity cycle for killing of Geobacillus stearothermophilus spores, Clostridium difficile spores, and methicillin-resistant Staphylococcus aureus (MRSA). Based on the test results, the risk of transmission of MRSA by the instruments was calculated and the risk of transmission of hepatitis B virus was estimated.

RESULTS

The machine washer/disinfector consistently reduced MRSA recovery by a factor of 1:100,000. The sterilization process inside the Steriset Container consistently reduced MRSA concentrations by a factor of >1:10,000,000 and killed 105C. difficile spores and 105G. stearothermophilus spores. The risk of MRSA transmission due to the incident was calculated to be 1 in 100 trillion.

CONCLUSIONS

The risk for transmission of infection due to the failure to follow recommended sterilization processes was negligible based upon complete killing of G. stearothermophilus biological indicator spores, C. difficile spores, and MRSA under conditions that replicated the incident where proper procedures were not followed. Such real-time assessments of the risks associated with specific incidents may provide evidence-based information that can be used to inform decisions regarding disclosure of the incident to patients.

Microbial colonization of electrocardiographic telemetry systems before and after cleaning

BACKGROUND

Nosocomial infections caused by multidrug-resistant organisms are commonly associated with longer hospital stays up to 12 to 18 days and annual estimated costs of $5.7 billion to $6.8 billion. One common mode of transmission is cross-contamination between patients and providers via surface contaminants on devices such as telemetry systems.

OBJECTIVES

To determine the effect of a cleaning protocol on colonization of surface contaminants on electrocardiographic telemetry systems in 4 cardiovascular step-down units and to compare colonization in medical vs surgical units.

METHODS

A prospective, randomized, case-controlled study (the Descriptive Evaluation of Electrocardiographic Telemetry Pathogens [DEET] study) was designed to evaluate microbial colonization on telemetry systems before and after cleaning with sodium hypochlorite wipes. Each randomly selected telemetry system served as its own control. Nurses used a standardized culture technique recommended by personnel in infection control. Colonization before and after cleaning was analyzed by using the McNemar test and frequency tables. A standard cost-comparison analysis was conducted.

RESULTS

A total of 30 telemetry systems in medical units and 29 in surgical units were evaluated; 41 telemetry systems (69%) were colonized before the intervention, and 14 (24%) were colonized after it (P < .001). Before cleaning, surface organisms were present in 14 instances (35%) in surgical units and in 27 instances (66%) in medical units (P < .001). The cleaning strategy was cost-effective.

CONCLUSIONS

The cleaning intervention was effective, and cost-comparison analysis supported implementing a cleaning strategy for reusable leads rather than investing in disposable leads.

Fungal pollution of indoor environments and its management

Indoor environments play important roles in human health. The health hazards posed by polluted indoor environments include allergy, infections and toxicity. Life style changes have resulted in a shift from open air environments to air tight, energy efficient, environments, in which people spend a substantial portion of their time. Most indoor air pollution comes from the hazardous non biological agents and biological agents. Fungi are ubiquitous in distribution and are a serious threat to public health in indoor environments. In this communication, we have reviewed the current status on biotic indoor air pollution, role of fungi as biological contaminants and their impact on human health.

Current and emergent strategies for disinfection of hospital environments

A significant number of hospital-acquired infections occur due to inefficient disinfection of hospital surfaces, instruments and rooms. The emergence and wide spread of multiresistant forms of several microorganisms has led to a situation where few compounds are able to inhibit or kill the infectious agents. Several strategies to disinfect both clinical equipment and the environment are available, often involving the use of antimicrobial chemicals. More recently, investigations into gas plasma, antimicrobial surfaces and vapour systems have gained interest as promising alternatives to conventional disinfectants. This review provides updated information on the current and emergent disinfection strategies for clinical environments.

Disinfection and sterilization: an overview

All invasive procedures involve contact by a medical device or surgical instrument with a patient's sterile tissue or mucous membranes. The level of disinfection or sterilization is dependent on the intended use of the object: critical (items that contact sterile tissue such as surgical instruments), semicritical (items that contact mucous membrane such as endoscopes), and noncritical (devices that contact only intact skin such as stethoscopes) items require sterilization, high-level disinfection, and low-level disinfection, respectively. Cleaning must always precede high-level disinfection and sterilization.

Assessing the risk of disease transmission to patients when there is a failure to follow recommended disinfection and sterilization guidelines

Medical devices that enter body tissues should be sterile, whereas devices that contact mucous membranes should be high-level disinfected between patients. Failure to ensure proper cleaning and sterilization or disinfection may lead to patient-to-patient transmission of pathogens. This paper describes a protocol that can guide an institution in managing potential disinfection and sterilization failures.

New developments in reprocessing semicritical items

Semicritical medical devices are defined as items that come into contact with mucous membranes or nonintact skin (eg, gastrointestinal endoscopes). Such medical devices require minimally high-level disinfection. Because many of these items are temperature sensitive, low-temperature chemical methods must be used rather than steam sterilization. Strict adherence to current guidelines is required because more outbreaks have been linked to inadequately cleaned or disinfected endoscopes undergoing high-level disinfection than any other medical device.

Towards further reduction and replacement of animal bioassays in prion research by cell and protein misfolding cyclic amplification assays

Laboratory animals have long since been used extensively in bioassays for prions in order to quantify, usually in terms of median infective doses [ID50], how infectious these pathogens are in vivo. The identification of aberrant prion protein as the main component and self-replicating principle of prions has given rise to alternative approaches for prion titration. Such approaches often use protein misfolding cyclic amplification (PMCA) for the cell-free biochemical measurement of prion-associated seeding activity, or cell assays for the titration of in vitro infectivity. However, median seeding and cell culture infective doses (SD50 and CCID50, respectively) of prions are neither formally congruent nor definitely representative for ID50 titres in animals and can be therefore only tentatively translated into the latter. This may potentially impede the acceptance and use of alternative methods to animal bioassays in prion research. Thus, we suggest performing PMCA and cell assays jointly, and to check whether these profoundly different test principles deliver consistent results in order to strengthen the reliability and credibility of prion ID50 assessments by in vitro methods. With regard to this rationale, we describe three pairs of PMCA and glial cell assays for different hamster-adapted prion agents (the frequently used 263K scrapie strain, and 22A-H scrapie and BSE-H). In addition, we report on the adaptation of quantitative PMCA to human variant Creutzfeldt-Jakob disease (vCJD) prions on steel wires for prion disinfection studies. Our rationale and methodology can be systematically extended to other types of prions and used to further reduce or replace prion bioassays in rodents.

Fungal pollution of indoor environments and its management

Indoor environments play important roles in human health. The health hazards posed by polluted indoor environments include allergy, infections and toxicity. Life style changes have resulted in a shift from open air environments to air tight, energy efficient, environments, in which people spend a substantial portion of their time. Most indoor air pollution comes from the hazardous non biological agents and biological agents. Fungi are ubiquitous in distribution and are a serious threat to public health in indoor environments. In this communication, we have reviewed the current status on biotic indoor air pollution, role of fungi as biological contaminants and their impact on human health.

Harnessing prions as test agents for the development of broad-range disinfectants

The development of disinfectants with broad-range efficacy against bacteria, viruses, fungi, protozoa and prions constitutes an ongoing challenge. Prions, the causative agents of transmissible spongiform encephalopathies (TSEs) such as Creutzfeldt-Jakob disease (CJD) or its variant (vCJD) rank among the pathogens with the highest resistance to disinfection. Pilot studies have shown that procedures devised for prion disinfection were also highly effective against microbial pathogens. This fueled the idea to systematically exploit prions as test pathogens for the identification of new potential broad-range disinfectants. Prions essentially consist of misfolded, aggregated prion protein (PrP) and putatively replicate by nucleation-dependent, or seeded PrP polymerization. Recently, we have been able to establish PrP seeding activity as a quantitative in vitro indicator for the disinfection of 263K scrapie prions on steel wires used as surrogates for medical instruments. The seeding activity on wires re-processed in different disinfectants could be (1) biochemically determined by quantitative protein misfolding cyclic amplification (qPMCA), (2) biologically detected after qPMCA in a cell assay and (3) correctly translated into residual titres of scrapie infectivity. Our approach will substantially facilitate the identification of disinfectants with efficacy against prions as promising candidates for a further microbiological validation of broad-range activity.

Decontamination of transvaginal ultrasound probes: review of national practice and need for national guidelines

AIM

To determine the national practice of transvaginal ultrasound (TVUS) probe decontamination in English hospitals and to develop recommendations for guidance.

MATERIALS AND METHODS

A literature review was undertaken to clarify best practice and evaluate methods of decontamination of TVUS probes. A questionnaire was developed to ascertain TVUS probe decontamination programmes in current use within English hospitals. This was sent to ultrasound leads of 100 English hospitals; 68 hospitals responded.

RESULTS

There is a wide variation in TVUS probe decontamination across English hospitals. Although the majority of respondents (87%, 59/68) reported having clear and practical written guidelines for TVUS decontamination, the frequency, methods, and types of decontamination solutions utilized were widely variable and none meet the standards required to achieve high-level disinfection.

CONCLUSION

While the decontamination of other endoluminal medical devices (e.g., flexible endoscopes) is well defined and regulated, the decontamination of TVUS probes has no such guidance. There appears to be incomplete understanding of the level of risk posed by TVUS probes, and in some cases, this has resulted in highly questionable practices regarding TVUS hygiene. There is an urgent need to develop evidence-based national guidance for TVUS probe decontamination.