Mandibular Fractures: An Analysis of the Epidemiology and Patterns of Injury in 4,143 Fractures

A comparison of panoramic radiography and cone beam computed tomography in the detection of osteosynthesis complications in sheep mandibular angle fractures

OBJECTIVE

The aim of this study was to compare the diagnostic efficacy of panoramic radiography (PANO) and cone beam computed tomography (CBCT) in detecting simulated complications of plate osteosynthesis applied to mandibular angle fractures (MAFs).

STUDY DESIGN

Unfavorable MAFs were created in 100 fresh sheep hemimandibles. Fractures were fixed with 4-hole titanium miniplates and screws. Bone necrosis around the screws, penetration of the screw into the inferior alveolar canal, screw loosening, and plate breakage were simulated. The diagnostic efficacy of the imaging techniques was compared by using intra- and interobserver agreement scores and area under the receiver operating characteristic curve (AUC) values. Examination time (ET), confidence scores (CS), and planar preference (PP) in CBCT evaluation were assessed.

RESULTS

Intra- and interobserver agreement scores varied between 0.61 and 0.91. AUCs for screw penetration into the inferior alveolar canal and screw loosening were significantly higher in CBCT than in PANO (P < .05). CBCT presented significantly higher ET and CS values compared with PANO (P < .05). PP showed significant differences among types of complications (P < .05).

CONCLUSIONS

PANO provided acceptable outcomes in the detection of bone necrosis and broken plates around the screw, but CBCT was more likely to enable detection of all simulated types of complications with higher confidence.

Fracture patterns and causes in the craniofacial region: an 8-year review of 2076 patients

Background

For proper recovery from craniofacial fracture, it is necessary to establish guidelines based on trends. This study aimed to analyze the patterns and causes of craniofacial fractures.

Methods

This retrospective study analyzed patients who underwent surgery for craniofacial fractures between 2010 and 2017 at a single center. Several parameters, including time of injury, region and cause of fracture, alcohol intoxication, time from injury to surgery, hospitalization period, and postoperative complications, were evaluated.

Results

This study analyzed 2708 fracture lesions of 2076 patients, among whom males aged 10 to 39 years were the most numerous. The number of patients was significantly higher in the middle of a month. The most common fractures were a nasal bone fracture. The most common causes of fracture were ground accidents and personal assault, which tended to frequently cause more nasal bone fracture than other fractures. Traffic accidents and high falls tended to cause zygomatic arch and maxillary wall fractures more frequently. Postoperative complications—observed in 126 patients—had a significant relationship with the end of a month, mandible or panfacial fracture, and traffic accidents.

Conclusions

The present findings on long-term craniofacial fracture trends should be considered by clinicians dealing with fractures and could be useful for policy decisions.

Electronic supplementary material

The online version of this article (10.1186/s40902-018-0168-y) contains supplementary material, which is available to authorized users.

The Relation Between Morphometric Features and Susceptibility to Mandibular Angle Fractures

The study was aimed to determine possible relations between skeletal morphologic parameters to mandibular angle fractures. Retrospective study of 100 patients suffering from mandibular fractures and treated in the Rambam Health Care Campus between the years 2013 and 2017 was conducted. Predictor variable was facial skeletal morphologic features as derived from the measurements. Outcome variable was mandibular angle fractures. About 42 patients suffered from angle fractures. Gonial angle (131.3° versus 118.1°), condylar neck width (8.3 mm versus 6.8 mm sagittaly and 7.1 mm versus 5.8 mm horizontally), and wisdom tooth prevalence and impaction were positively correlated to the fracture. Ramus height (48.3 mm versus 53.4 mm) was negatively correlated to angle fractures. Many reports in the literature show positive relations between impacted 3rd molars and angle fractures, yet only sporadic reports describe relations between facial fractures and facial features. Our results showed the predictable positive relation between angle fractures and 3rd molar prevalence and impaction. Yet surprisingly, we found unequivocal significant positive correlation between angle fractures to gonial angle and condylar neck width and negative correlation to ramus height. Based on the correlation to the gonial angle and ramal height, it is concluded that enlarged anterior vertical growth is a predictor for angle fractures, as are condylar neck width, and wisdom teeth.

Double unilateral, bilateral, and multiple mandibular fractures: an observational study

PURPOSE

Double and multiple mandibular fractures are associated to high morbidity and functional damage. This study aimed to evaluate the characteristics and outcomes of double unilateral, bilateral, and multiple mandibular fractures.

METHODS

A 7-year observational retrospective analysis was performed, and the injury-related data were collected from the medical records. Statistical analysis was performed using Fisher's exact test (p < 0.05).

RESULTS

In this period, 283 patients showed mandibular fractures. Of them, 83 (29.7%) had double or multiple mandibular fractures and were included in the study. Double bilateral fractures were more prevalent than multiple or double unilateral. Multiple fractures presented significant association with the combination of load-bearing and load-sharing fixation protocols. Most cases (94.0%) applied at least one type of internal fixation system. However, there was a positive association between condylar fractures and non-surgical treatment (p < 0.01). Moreover, mandibular body fractures were associated with load-bearing fixation (p < 0.01). In 56 cases, no complications were observed (67.5%). Complications were divided into treatment failure (10.8%) and transitory or minor complications (21.7%). There was no statistical association between complications and fracture pattern, fracture-tooth relation, and treatment modality.

CONCLUSION

Double and multiple mandibular fractures represented almost one third of all mandibular fractures, and regardless to treatment protocol, there was no difference about complications. Moreover, although a considerable complication rate was found, most of them were minor or transitory.

Transmasseteric Anterior Parotid Approach for Treatment of Mandibular Subcondylar Fractures

This study demonstrated the application of transmasseteric anterior parotid approach for open reduction of mandibular subcondylar fractures depending on the basis of the anatomical study of the temporomandibular joint and parotid gland area. The anatomical study was performed on 5 Chinese adult cadavers fixed by 10% formalin. The temporomandibular joints and parotid regions were studied. In the clinical study, 26 patients with mandibular subcondylar fractures were recruited between July 2014 and December 2017. All 26 patients with mandibular subcondylar fractures received satisfactory occlusions and normal mouth opening: no postoperative facial paralysis occurred in these patients. It is crucial to know the anatomy of both temporomandibular joint and parotid region for reducing significantly the surgical trauma and complications. Transmasseteric anterior parotid approach is a feasible approach for the surgical treatment of the mandibular subcondylar fractures. This method can provide adequate exposure, minimal facial nerve injury, open reduction easily, and inconspicuous scarring.

Epidemiology of facial fractures in the elderly

Facial fractures are considered more common in young individuals. However, they are also increasing in the aging population. Investigation of the characteristics of such fractures is important so as to be able to devise preventive measures and specifications for their proper treatment. We carried out a descriptive retrospective epidemiological study. The information was taken from a database of medical files of patients over 65 years of age in the setting of the emergency ward. Patient information was included for 157 patients aged 65 to 100 years. Two-thirds of the individuals with facial trauma were women. Twenty-eight had a prior history of cognitive impairment. For half of the cases, the trauma occurred at their place of residence, while accidents and falls in public areas were not uncommon. The most frequent site for the fractures was the middle third of the face. These facial fractures were serious in light of their location, as well as the associated skeletal and intracranial lesions. The number of such fractures can be expected to increase with time. Their hospital cost is higher than with younger individuals. Preventative measures need to be devised and the treatment should be all-encompassing.

Incidence and etiology of maxillofacial trauma: a retrospective analysis of King Chulalongkorn Memorial Hospital in the past decade

Background

Maxillofacial injury is a common injury in trauma patients. The incidence, associated injuries and causes have been never reported for King Chulalongkorn Memorial Hospital (KCMH).

Objectives

To report the incidence, associated injuries, age groups, treatments, and behavioral risks in maxillofacial patients who were admitted to KCMH in the past decade.

Methods

We conducted a retrospective descriptive analysis of patients from January 1, 2006, to December 31, 2015, to evaluate the age groups, causes, sites of facial bone fracture, associated injuries, treatments, and behavioral risks.

Results

There were 1,275 patients (79% male and 21% female). The most common age group was 21–30 years (30.6%), followed by 11–20 years (19.5%) and 31–40 years (18.8%). The most common cause of injury was motorcycle accident (39.7%), and the most common associated injury was head injury (58%). The total number of fractures were 1,526, with the most common fracture site being the zygomaticomaxillary complex (38.6%), followed by mandible (21.8%) and nasal bone (17.8%). Most fractures were treated using open reduction and internal fixation with plates and screws.

Conclusions

The main cause of maxillofacial injury is motorcycle accident even though the government launched a policy named “Decade of Action for Road Safety 2011–2020” to reduce road traffic deaths. Thailand continues to need stronger law enforcement to reduce risky motorcycle driving behavior.

Evaluation of an experimental oblique plate for osteosynthesis of mandibular condyle fractures

OBJECTIVE

The aim of this study was to test the bone thickness and potential screw length for osteosynthesis of condylar base fractures (according to the Loukota classification) with an experimental titanium plate, placed in an ideal position against 2 types of conventional plates.

STUDY DESIGN

After exclusion of completely edentulous mandibles, 28 dentate macerated mandibles available at the time of the study were included. Linear regression models 1 and 2 compared the sums of the 2 cranial bone thicknesses and the 3 caudal thicknesses among the 3 different plate designs, and linear models 3 and 4 tested the bone thickness in the 2 most cranial screw axes.

RESULTS

Linear models 1 and 2 revealed significantly higher potential screw lengths for the experimental oblique plate. Equally, linear models 3 and 4 indicated significantly higher bone thickness for the novel oblique plate.

CONCLUSION

The novel proposed oblique plate allows for favorable plate positioning in a biomechanically ideal location with sufficient amounts of local bone for stable plate fixation. When plates with 15-degree angulated screw holes are used, stable bicortical plate fixation can be achieved.

The epidemiology of mandibular fractures in Caracas, Venezuela: Incidence and its combination patterns

BACKGROUND/AIM

As reported in the literature by several authors, there is a great variation between countries in terms of etiology and patterns of mandibular fractures. The aim of this study was to determine the incidence of mandibular fractures at the Oral and Maxillofacial Surgery Unit, "Dr. Domingo Luciani" Hospital, Venezuela, during the period January 2010 to March 2013.

MATERIALS AND METHODS

A retrospective study was conducted to assess the etiology of trauma, age group, gender, anatomic distribution of injury, and combination patterns by reviewing patients records.

RESULTS

There were 334 patients with 522 mandibular fractures averaging 1.56 fractures per patient. Eighty-five percent of the patients were males with an overall male: female ratio of 6.15:1. The highest occurrence of trauma was in the 20-29 years (43.4%) age group. The etiology most frequently observed was motorcycle traffic accidents in 94 patients (28.1%), and the parasymphysis region was the most common location with 144 (27.6%) fractures. Almost half (48.8%) of the injuries were combined mandibular fractures with 29 different combinations, and the most common was a mandibular body fracture + parasymphysis fracture (22.1%).

CONCLUSION

Mandibular fracture is a common facial injury with variable incidence and etiology across gender and age range. The findings of this study are similar to other studies and provide important clinical information that will assist in the treatment planning of these types of injuries.

Multidetector CT of Mandibular Fractures, Reductions, and Complications: A Clinically Relevant Primer for the Radiologist

After the nasal bones, the mandible is the second most common site of facial fractures, and mandibular fractures frequently require open reduction. In the trauma injury setting, multidetector computed tomography (CT) has become the cornerstone imaging modality for determining the most appropriate treatment management, fixation method, and surgical approach. Multidetector CT is also used to assess the adequacy of the reduction and evaluate potential complications in the postoperative period. For successful restoration of the mandible's form and function, as well as management of posttraumatic and postoperative complications, reconstructive surgeons are required to have a detailed understanding of mandibular biomechanics, occlusion, and anatomy. To provide added value in the diagnosis, treatment planning, and follow-up of mandibular fractures, radiologists should be aware of these concepts. Knowledge of the techniques commonly used to achieve occlusal and anatomic reduction and of the rationale behind the range of available treatment options for different injury patterns-from isolated and nondisplaced fractures to multisite and comminuted fractures-also is essential. This article focuses on the use of multidetector CT for pre- and postoperative evaluation of mandibular fractures and outlines fundamental concepts of diagnosis and management-beginning with an explanation of common fracture patterns and their biomechanical underpinnings, and followed by a review of the common postoperative appearances of these fractures after semirigid and rigid fixation procedures. Specific considerations regarding fractures in different regions of the tooth-bearing and non-tooth-bearing mandible and the unique issues pertaining to the edentulous atrophic mandible are reviewed, and key features that distinguish major from minor complications are described. (©)RSNA, 2016.

Patterns Associated with Adult Mandibular Fractures in Southern Taiwan-A Cross-Sectional Retrospective Study

Purpose: This study aimed to determine the patterns associated with adult mandibular fractures from a Level-I trauma center in southern Taiwan. Methods: The data of adult trauma patients admitted between 1 January 2009 and 31 December 2014 were retrieved from the Trauma Registry System and retrospectively reviewed. Fracture site and cause of injury were categorized into groups for comparison, and corresponding odds ratios (ORs) and 95% confidence intervals (CIs) were obtained by multivariate logistic regression. Results: Motorcycle accidents were the most common cause of mandibular fractures (76.3%), followed by falls (10.9%), motor vehicle accidents (4.8%), and being struck by/against objects (4.5%). Of the 503 cases of mandibular fractures, the condylar neck and head were the most common sites (32.0%), followed by the parasymphysis (21.7%), symphysis (19.5%), angle and ramus (17.5%), and body (9.3%). The location of mandibular fractures in patients who had motorcycle accidents was similar to that in all patients. Motor vehicle accidents resulted in a significantly higher number of body fractures (OR 3.3, 95% CI 1.24-8.76, p = 0.017) and struck injury in a significantly higher number of angle and ramus fractures (OR 3.9, 95% CI 1.48-10.26, p = 0.006) compared to motorcycle accidents. The helmet-wearing status and body weight were not associated with the location of mandibular fractures in motorcycle accidents. Conclusions: Our study revealed that the anatomic fracture sites of mandible were specifically related to different etiologies. In southern Taiwan, motorcycle accidents accounted for the major cause of mandibular fractures and were associated with the condylar neck and head as the most frequent fracture sites. In contrast, motor vehicle accidents and struck injuries tended to cause more body fracture as well as angle and ramus fracture compared to motorcycle accidents. Furthermore, the status of helmet-wearing and body weight were not associated with the location of mandible fractures caused by motorcycle accidents.

Coincidence of mandibular fractures with isolated posterior maxillary sinus fractures

BACKGROUND/AIM

There are no data available to show whether there is a relationship between mandibular fractures and isolated fractures of the posterior and/or lateral walls of the maxillary sinus. The aim of this study was to determine whether there is a coincidence between these fracture patterns.

METHODS

Four hundred large volume cone beam computed tomography scans (CBCT) of patients with a fracture of the mandible between 2008 and 2013 were analyzed retrospectively. Patients with multiple midfacial fractures were excluded. The radiographic findings were correlated with epidemiological and clinical data of the patients such as gender, age, treatment methods, or complications.

RESULTS

The most frequent fracture sites of the mandible were the jaw angle, the parasymphysis region, and the condyle. Nineteen of the 400 patients (4.75%) had an isolated fracture of the lateral and/or posterior maxillary sinus. Odds-ratio analysis revealed a high tendency for significant correlation of condylar process fractures with isolated maxillary sinus fractures. Chi-square test demonstrated a P-value near statistical significance (P=.054). No other fracture site of the mandible could be associated with an isolated fracture of the maxillary sinus.

CONCLUSION

A condylar process fracture of the mandible after trauma without any further injury of the midface may be associated with an isolated fracture of the lateral and/or posterior maxillary sinus.

Finite Element Evaluation of Stable Fixation in Combined Mandibular Fractures

PURPOSE

The fixation of combined mandibular fractures, especially symphyseal-condylar fractures, although occurring commonly and having a higher complication rate in the clinic, is rarely investigated regarding predictable therapeutic approaches. Thus this study's aim was to assess different forms of condylar fixation when combined with symphyseal fracture fixation.

MATERIALS AND METHODS

Using finite element models, we analyzed the stress distribution that occurs when a condylar fracture is fixed with 1 miniplate, 2 miniplates, or a trapezoidal condylar miniplate and when a symphyseal fracture is fixed with 2 parallel plates, 2 perpendicular plates, or 2 lag screws. The null hypothesis was that there would be no differences among the different fixation techniques.

RESULTS

The results showed a stress concentration in the anterior region of the condyle, close to the sigmoid notch. Moreover, adequate fixation in the symphysis could result in less tension at the condylar region. Therefore, when the symphysis was fixed with a lag-screw technique, condylar fixation was less required, showing a more adequate stress distribution when the condyle was fixed with 1 or 2 plates. Conversely, when the symphyseal fixation was less effective, by use of perpendicular plates, there was a change in the stress distribution at the condylar region, altering fixation behavior and resulting in more tension and displacement in the condyle, especially when a trapezoidal plate was used.

CONCLUSIONS

A lag screw and parallel double plates appear to be suitable for symphyseal fixation, whereas 2 straightly positioned plates and a trapezoidal plate are suitable for condylar fixation. However, the combination of perpendicular plates in symphyseal fixation and a trapezoidal plate in condylar fixation showed an altered stress distribution.

Multi-institutional Analysis of Surgical Management and Outcomes of Mandibular Fracture Repair in Adults

Mandibular fractures are rare, most commonly occurring in young male patients who present with facial trauma. The etiology, incidence, and presentation vary among previous publications depending on cultural and socioeconomic factors of the region of origin. This multi-institutional study aims to present demographic characteristics, surgical treatment, and clinical outcomes of surgical repair of mandible fractures in the United States. An analysis of the American College of Surgeons National Surgical Quality Improvement Program (ACS NSQIP) adult databases of the years 2006 through 2014 was performed identifying 940 patients with an International Classification of Diseases, version 9 (ICD-9) diagnosis of either closed or open fracture of the mandible. Preoperative, perioperative, and postoperative details were categorized and evaluated for these two cohorts. Multivariate analysis was performed to detect risk factors related to any complications. Patients were predominantly male (85.7%), young with a mean age of 34.0 ± 14.8 years, and relatively healthy with body mass index of 23.6 ± 8.2 and an American Society of Anesthesiologists (ASA) class of 1 or 2 (84.4%). However, more than half were regular smokers (51.1%). The top five most frequent procedures performed for mandibular repair were exclusively open surgical approaches with internal, external, or interdental fixation in both cohorts. Patients with open fractures were more often admitted as emergencies, treated inpatient, required longer operative times, and presented with more contaminated wounds ( p  < 0.05). Overall, medical (1.7%) and surgical complications (3.7%) were low. A high ASA class 3 or above and emergency operations were identified as risk factors for medical adverse events. Despite frequent concomitant injuries after trauma and a diverse array of mandibular injury types, our patient sample demonstrated favorable outcomes and low complication rates. Open surgical techniques were the most common procedures in this study representing the American population.

Controversies in the Management of the Trauma Patient

Facial trauma is a significant cause of morbidity in the United States. Despite the large volume of trauma surgeries at most academic institutions, there is still controversy regarding management of many traumatic injuries. The literature lacks clear-cut best practices for most fractures. In orbital trauma, there is debate about the optimal timing of repair, preferred biomaterial to be used, and the utility of evaluation afterward with intraoperative computed tomographic scan. In repair of mandible fractures, there is debate regarding open versus closed reduction of subcondylar fractures, or alternatively, endoscopic repair.

Fracture patterns in the maxillofacial region: a four-year retrospective study

Objectives

The facial bones are the most noticeable area in the human body, and facial injuries can cause significant functional, aesthetic, and psychological complications. Continuous study of the patterns of facial bone fractures and changes in trends is helpful in the prevention and treatment of maxillofacial fractures. The purpose of the current clinico-statistical study is to investigate the pattern of facial fractures over a 4-year period.

Materials and Methods

A retrospective analysis of 1,824 fracture sites was carried out in 1,284 patients admitted to SMG-SNU Boramae Medical Center for facial bone fracture from January 2010 to December 2013. We evaluated the distributions of age/gender/season, fracture site, cause of injury, duration from injury to treatment, hospitalization period, and postoperative complications.

Results

The ratio of men to women was 3.2:1. Most fractures occurred in individuals aged between teens to 40s and were most prevalent at the middle and end of the month. Fractures occurred in the nasal bone (65.0%), orbital wall (29.2%), maxillary wall (15.3%), zygomatic arch (13.2%), zygomaticomaxillary complex (9.8%), mandibular symphysis (6.5%), mandibular angle (5.9%), mandibular condyle (4.9%), and mandibular body (1.9%). The most common etiologies were fall (32.5%) and assault (26.0%). The average duration of injury to treatment was 6 days, and the average hospitalization period was 5 days. Eighteen postoperative complications were observed in 17 patients, mainly infection and malocclusion in the mandible.

Conclusion

This study reflects the tendency for trauma in the Seoul metropolitan region because it analyzes all facial fracture patients who visited our hospital regardless of the specific department. Distinctively, in this study, midfacial fractures had a much higher incidence than mandible fractures.

Unusual Spontaneous Mandibular Regeneration of a Large Defect Followed by Orthodontics, Alveolar Distraction, and Dental Implant Rehabilitation: A 10-Year Follow-Up

This report describes an atypical case of spontaneous mandibular regeneration of a large size bony defect after resection of an aseptic osteonecrotic area near the symphysis and parasymphyseal area. The patient underwent orthodontic therapy, vertical osteogenic distraction of the alveolar bone, and oral rehabilitation with an implant borne prosthesis. This case study also describes the 10-year follow-up of comprehensive multidisciplinary treatment and successful recovery of a patient's esthetic and functional aspects.

In Vitro Mechanical Analysis of Different Techniques of Internal Fixation of Combined Mandibular Angle and Body Fractures

PURPOSE

To evaluate in vitro resistance of 5 techniques of internal fixation of bilateral fractures involving the mandibular angle and body.

MATERIALS AND METHODS

Twenty-five polyurethane mandibles were used as substrates, fixed with a 2-mm fixation system, and divided into 5 groups: I, 1 4-hole plate, without intermediate space, in the neutral zone of the mandibular body and another similar plate in the external oblique ridge of the contralateral mandibular angle; II, 1 6-hole plate, with intermediate space, in the neutral zone of the mandibular body and a similar plate in the external oblique ridge of the left mandibular angle; III, 1 4-hole locking plate, with intermediate space, in the right neutral zone and another similar plate in the left external oblique ridge; IV, 2 4-hole plates, with intermediate space, one in the tension zone and the other in the compression zone of the mandibular body, and 1 4-hole plate, with intermediate space, in the external oblique ridge of the contralateral mandibular angle; V, 2 4-hole plates with intermediate space, one in the tension zone and the other in the compression zone of the mandibular body and similarly in the buccal side of the left mandibular angle. Mandibles were subjected to vertical linear load tests by a mechanical testing machine (Instron 4411, Instron Corp, Norwood, MA) to record peak load and load for displacements of 3, 5, and 7 mm.

RESULTS

Group I had the least mechanical resistance of all groups, regardless of displacement, and group IV had the greatest mechanical resistance. Among groups II, III, and V, there was no statistically meaningful difference.

CONCLUSION

Fixation of bilateral mandibular fractures involving the mandibular angle and body using 2 plates in the region of the body and 1 plate in the tension zone in the region of the mandibular angle was the technique that presented the best mechanical resistance.