Peroxymonosulfate-enhanced photocatalysis by carbonyl-modified g-C3N4 for effective degradation of the tetracycline hydrochloride

Facile preparation of graphitic carbon nitride nanosheet/agar composite hydrogels for removal of tetracycline via the synergy of adsorption and photocatalysis

Compared with the BCN/agar composite hydrogel, the CNNS/agar 4 composite hydrogel exhibited a much higher photocatalytic activity for tetracycline degradation due to suppressive recombination of electrons and holes.

Advances in application of g-C3N4-based materials for treatment of polluted water and wastewater via activation of oxidants and photoelectrocatalysis: A comprehensive review

Recently, graphitic carbon nitride (g-C₃N₄) has received significant attention as a non-metallic, visible-light-activated photocatalyst for treating water and wastewater by degrading contaminants. Accordingly, previous review articles have focused on the photocatalytic properties of g-C₃N₄-based materials. However, g-C₃N₄ has several other notable features, such as high adsorption affinity towards aromatic substances and heavy metals, high thermal and chemical resistances, good compatibility with various materials, and easily scalable synthesis; therefore, in addition to simple photocatalysis, it can be widely used in other decontamination systems based on activation of oxidants and electrocatalysis. This critical review provides a comprehensive summary of recent advancements in g-C₃N₄-based materials and their use in treating polluted water and wastewater via the following routes (1) activation of oxidizing agents (e.g., hydrogen peroxide, ozone, peroxymonosulfate, and persulfate): and (2) photoelectrocatalysis using fabricated g-C₃N₄-based photocathodes and photoanodes. For each route, we briefly summarize the primary mechanisms, distinctive features, and performances of various water treatment systems using g-C₃N₄-based catalysts. We also highlight the specific roles of g-C₃N₄ in improving the efficiencies of these treatment processes. The advantages and limitations of previously reported water treatment systems using g-C₃N₄-based materials are also described and compared in this review. Finally, we discuss the challenges and prospects of improving g-C₃N₄-based water purification applications.

Heterojunction photocatalysts for degradation of the tetracycline antibiotic: a review

Antibiotic pollution is a major health issue inducing antibiotic resistance and the inefficiency of actual drugs, thus calling for improved methods to clean water and wastewater. Here we review the recent development of heterojunction photocatalysis and application in degrading tetracycline. We discuss mechanisms for separating photogenerated electron-hole pairs in different heterojunction systems such as traditional, p-n, direct Z-scheme, step-scheme, Schottky, and surface heterojunction. Degradation pathways of tetracycline during photocatalysis are presented. We compare the efficiency of tetracycline removal by various heterojunctions using quantum efficiency, space time yield, and figures of merit. Implications for the treatment of antibiotic-contaminated wastewater are discussed.

Review on application of perylene diimide (PDI)-based materials in environment: Pollutant detection and degradation

Environment pollution is getting serious and various poisonous contaminants with chemical durability, biotoxicity and bioaccumulation have been widespreadly discovered in municipal wastewaters and surface water. The detection and removal of pollutants show great significance for the protection of human health and other organisms. Due to its distinctive physical and chemical properties, perylene diimide (PDI) has received widespread attention from different research fields, especially in the area of environment. In this review, a comprehensive summary of the development of PDI-based materials in fluorescence detection and advanced oxidation technology for environment was introduced. Firstly, we chiefly presented the recent progress about the synthesis of PDI and PDI-based nanomaterials. Then, their application in fluorescence detection for environment was presented and categorized, principally including the detection of heavy metal ions, harmful anions and organic contaminants in the environment. In addition, the application of PDI and PDI-based materials in different advanced oxidation technologies for environment, such as photocatalysis, photoelectrocatalysis, Fenton and Fenton-like reaction and persulfate activation, was also summarized. At last, the challenges and future prospects of PDI-based materials in environmental applications were discussed. This review focuses on presenting the practical applications of PDI and PDI-based materials as fluorescent probes or catalysts (especially photocatalysts) in the detection of hazardous substances or catalytic elimination of organic contaminants. The contents are aimed at supplying the researchers with a deeper understanding of PDI and PDI-based materials and encouraging their further development in environmental applications.

Construction of Bi2O2CO3/Ti3C2 heterojunctions for enhancing the visible-light photocatalytic activity of tetracycline degradation

Bi₂O₂CO₃ (BOC) was successfully loaded on a highly conductive Ti₃C₂ surface by the hydrothermal method, forming a unique BOC/Ti₃C₂ heterostructure. The use of advanced characterization methods reveals the composition, morphology and photoelectric properties of the material. The results show that the interface formed by close contact between BOC and Ti₃C₂ provides an effective channel for charge transfer between the two. Importantly, the photocatalytic degradation efficiency of BOC/Ti₃C₂ for tetracycline (TC) is ~80%, which is significantly higher than the degradation efficiency of pure BOC and pure Ti₃C₂ for TC. In addition, BOC/Ti₃C₂ still has high catalytic activity in the degradation of complex mixed antibiotics. This is because BOC and Ti₃C₂ have large specific surface areas, high light absorption capacity and efficient carrier separation after recombination. At the same time, the detected superoxide radicals (O^2-) and holes (h⁺) are the main active substances. The degradation pathway and catalytic mechanism of the photocatalytic degradation of TC by BOC/Ti₃C₂ are further explained. This research designed and developed a BOC/Ti₃C₂ composite material for the photocatalytic degradation of tetracycline and mixed antibiotic wastewater, providing experimental methods and ideas for actual wastewater treatment.

Fabrication of self-assembled 0D-2D Bi2MoO6-g-C3N4 photocatalytic composite membrane based on PDA intermediate coating with visible light self-cleaning performance

A Self-cleaning surface can efficaciously solve the problem of irreversible contamination buildup on filtration membranes. Photocatalytic membranes were fabricated via vacuum assisted layer-by-layer (LBL) self-assembly of 0D-2D Bi₂MoO₆-g-C₃N₄ on a PDA coated thin-film composite PVDF substrate by Schiff base reaction. The rejection rate of the simulated polysaccharide was more than 90%, and that of the simulated protein was more than 80%. The combination of the membrane and the photocatalyst promoted the degradation of tetracycline hydrochloride by the composite membrane to 67.85% when original membranes had minor effect. Under visible light, reversible radiation pollutants (R_r) gradually replaced irreversible pollutants (R_ir) as the main pollutants. The flux recovery ratio (FRR) of 0D-2D Bi₂MoO₆-g-C₃N₄/PVDF membrane was 85% after being irradiated with visible light for 30 min. The flux recovery rate of contaminated photocatalytic membrane remained 75%, and the rejection was maintained in a stable range after four cycles of the cleaning operation under visible light. The results indicated that the excellent photocatalytic performance of 0D-2D Bi₂MoO₆-g-C₃N₄ photocatalysis material and the increase of multi-dimensional functional layer morphology on pollutant contact area improved the mechanical stability, interception performance and self-cleaning performance of the composite membrane. This work not only builds a new type of composite coating membranes, but also help us to further understand the relationship between the dimensions of photocatalytic materials and the improvement of photocatalytic membrane performance.

Peroxymonosulfate activation by tea residue biochar loaded with Fe3O4 for the degradation of tetracycline hydrochloride: performance and reaction mechanism

The recycling of agricultural and food waste is an effective way to reduce resource waste and ameliorate the shortage of natural resources. The treatment of antibiotic wastewater is a current research hotspot. In this study, waste tea residue was used as a raw material to prepare biochar (T-BC) and loaded with Fe3O4 as a catalyst to activate peroxymonosulfate (PMS) for oxidative degradation of tetracycline hydrochloride (TCH). Analysis techniques such as BET, SEM, XRD, FT-IR, XPS and VSM indicated that the heterogeneous catalyst (Fe3O4@T-BC) with good surface properties and magnetic properties was successfully prepared. The results of batch-scale experiments illustrated that when the dose of the Fe3O4@T-BC catalyst was 1 g L-1, the concentration of PMS was 1 g L-1, and the initial pH was 7, the degradation rate of TCH with a concentration of 50 mg L-1 reached 97.89% after 60 minutes of reaction. When the initial pH was 11, the degradation rate of TCH reached 99.86%. After the catalyst was recycled four times using an external magnet, the degradation rate of TCH could still reach 71.32%. The data of removal of TCH could be best fitted by a pseudo-first-order model. The analysis of the degradation mechanism through a free radical quenching experiment and EPR analysis, as well as the exploration of TCH intermediate products and reaction paths through the LC-MS method, all confirmed that the Fe3O4@T-BC prepared by this method is expected to become a cost-effective and environmentally friendly heterogeneous catalyst for activating persulfate degradation of tetracycline antibiotics.

Recent progress in g-C3N4, TiO2 and ZnO based photocatalysts for dye degradation: Strategies to improve photocatalytic activity

Water contamination by dyes is a matter of concern for human health and the environment. Various methods (membrane separation, coagulation and adsorption) have been explored to remove/degrade dyes. However, now the exploitation of semiconductor assisted materials using renewable solar energy has emerged as a potential candidate to resolve the issue. Although, single component photocatalysts (ZnO, TiO₂, ZrO₂) were experimented, due to their low efficiency and stability due to the high recombination rate electron-hole pair and inefficient visible light absorption, composites of semiconductor materials are being used. Semiconductor heterojunction systems are developed by coupling two or more semiconductor components. The synergistic effect of their properties, such as adsorption and improved charge carrier migration, is observed to increase overall stability. This review covers recent progress in advanced nanocomposite materials based on g-C₃N₄, TiO₂ and ZnO used as photocatalysts with details of enhancing the photocatalytic properties by heterojunctions, crystallinity and doping. The conclusion at the end displays a summary, research gaps and future outlook. A holistic analysis of recent progress to demonstrate the efficient heterojunctions for photodegradation with optimal conditions, this review will be helpful for the development of efficient heterostructured systems for photodegradation. This review covers references from the year 2017-2020.

Synergetic adsorption and Fenton-like degradation of tetracycline hydrochloride by magnetic spent bleaching earth carbon: Insights into performance and reaction mechanism

In this study, the synergetic adsorption and Fenton-like degradation of tetracycline hydrochloride (TCH) by magnetic spent bleaching earth carbon (Mag-SBE@C) with H₂O₂ were developed and performed, with 91.5% of TCH degradation efficiency and 42.1% of TOC removal efficiency. The effects of the reaction parameters (temperature, initial pH, catalyst dosage, molar ratio of TCH to H₂O₂) on TCH degradation in Mag-SBE@C/H₂O₂ system were studied. Under the optimal conditions (temperature 41.1 °C, initial pH 4.89 and molar ratio of H₂O₂ to TCH 114.435) forecasted by response surface methodology (RSM), high TCH degradation efficiency (99%) was achieved. Also, four cycling tests were performed to confirm the excellent stability and regeneration ability of Mag-SBE@C in presence of H₂O₂. In addition, the characteristics of Mag-SBE@C after reaction are analyzed in details via scanning electron microscope (SEM), energy dispersive spectrometer (EDS), Brunner-Emmet-Teller (BET), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectrum (FTIR) and X-ray diffraction (XRD), and it was found that Fe₃O₄ nanoparticles on Mag-SBE@C surface acted as co-catalyst and participated in degradation and improved reaction efficiency, while its properties were not greatly changed. The quenching experiments showed that hydroxyl radicals on Mag-SBE@C surface (OH_adsorption) were dominant in Mag-SBE@C/H₂O₂ system. Meanwhile, three possible TCH degradation pathways were given based on the possible intermediates determined by liquid chromatography quadrupole-time-of-flight mass spectrometry (LC-Q-TOF-MS/MS). Mag-SBE@C is an excellent heterogeneous Fenton-like catalyst, exhibiting greatly potential to antibiotics elimination.