Polymer multilayers enabled stable and flexible Au@Ag nanoparticle array for nondestructive SERS detection of pesticide residues

SiO2 Microsphere Array Coated by Ag Nanoparticles as Raman Enhancement Sensor with High Sensitivity and High Stability

In this paper, a monolayer SiO₂ microsphere (MS) array was self-assembled on a silicon substrate, and monolayer dense silver nanoparticles (AgNPs) with different particle sizes were transferred onto the single-layer SiO₂ MS array using a liquid–liquid interface method. A double monolayer “Ag@SiO₂” with high sensitivity and high uniformity was prepared as a surface-enhanced Raman scattering (SERS) substrate. The electromagnetic distribution on the Ag@SiO₂ substrate was analyzed using the Lumerical FDTD (finite difference time domain) Solutions software and the corresponding theoretical enhancement factors were calculated. The experimental results show that a Ag@SiO₂ sample with a AgNPs diameter of 30 nm has the maximal electric field value at the AgNPs gap. The limit of detection (LOD) is 10⁻¹⁶ mol/L for Rhodamine 6G (R6G) analytes and the analytical enhancement factor (AEF) can reach ~2.3 × 10¹³. Our sample also shows high uniformity, with the calculated relative standard deviation (RSD) of ~5.78%.

New Trends in Nanoarchitectured SERS Substrates: Nanospaces, 2D Materials, and Organic Heterostructures

This article reviews recent fabrication methods for surface-enhanced Raman spectroscopy (SERS) substrates with a focus on advanced nanoarchitecture based on noble metals with special nanospaces (round tips, gaps, and porous spaces), nanolayered 2D materials, including hybridization with metallic nanostructures (NSs), and the contemporary repertoire of nanoarchitecturing with organic molecules. The use of SERS for multidisciplinary applications has been extensively investigated because the considerably enhanced signal intensity enables the detection of a very small number of molecules with molecular fingerprints. Nanoarchitecture strategies for the design of new NSs play a vital role in developing SERS substrates. In this review, recent achievements with respect to the special morphology of metallic NSs are discussed, and future directions are outlined for the development of available NSs with reproducible preparation and well-controlled nanoarchitecture. Nanolayered 2D materials are proposed for SERS applications as an alternative to the noble metals. The modern solutions to existing limitations for their applications are described together with the state-of-the-art in bio/environmental SERS sensing using 2D materials-based composites. To complement the existing toolbox of plasmonic inorganic NSs, hybridization with organic molecules is proposed to improve the stability of NSs and selectivity of SERS sensing by hybridizing with small or large organic molecules.

Effect of synthesis time on plasmonic properties of Ag dendritic nanoforests

The effects of synthesis time on the plasmonic properties of Ag dendritic nanoforests on Si substrate (Ag-DNF/Si) samples synthesized through the fluoride-assisted galvanic replacement reaction were investigated. The Ag-DNF/Si samples were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy, reflection spectroscopy, X-ray diffraction and surface-enhanced Raman spectroscopy (SERS). The prolonged reaction time led to the growth of an Ag-DNF layer and etched Si hole array. SEM images and variations in the fractal dimension index indicated that complex-structure, feather-like leaves became coral-like branches between 30 and 60 min of synthesis. The morphological variation during the growth of the Ag DNFs resulted in different optical responses to light illumination, especially those of light harvest and energy transformation. The sample achieved the most desirable light-to-heat conversion efficiency and SERS response with a 30 min growth time. A longer synthesis time or thicker Ag-DNF layer on the Si substrate did not have superior plasmonic properties.

Dendrimer stabilized nanoalloys for inkjet printing of surface-enhanced Raman scattering substrates

Research on paper substrates prepared by inkjet deposition of metal nanoparticles for sensing applications has become a hot topic in recent years; however, the design of such substrates based on the deposition of alloy nanoparticles remains less explored. Herein, we report for the first time the inkjet printing of dendrimer-stabilized colloidal metal nanoalloys for the preparation of paper substrates for surface-enhanced Raman scattering (SERS) spectroscopy. To this end, nanoassemblies containing variable molar ratios of Au:Ag were prepared in the presence of poly(amidoamine) dendrimer (PAMAM), resulting in plasmonic properties that depend on the chemical composition of the final materials. The dendrimer-stabilized Au:Ag:PAMAM colloids exhibit high colloidal stability, making them suitable for the preparation of inks for long-term use in inkjet printing of paper substrates. Moreover, the pre-treatment of paper with a polystyrene (PS) aqueous emulsion resulted in hydrophobic substrates with improved SERS sensitivity, as illustrated in the analytical detection of tetramethylthiuram disulfide (thiram pesticide) dissolved in aqueous solutions. We suggest that the interactions established between the two polymers (PAMAM and PS) in an interface region over the cellulosic fibres, resulted in more exposed metallic surfaces for the adsorption of the analyte molecules. The resulting hydrophobic substrates show long-term plasmonic stability with high SERS signal retention for at least ninety days.

Electrochemical Self-Assembled Gold Nanoparticle SERS Substrate Coupled with Diazotization for Sensitive Detection of Nitrite

The accurate determination of nitrite in food samples is of great significance for ensuring people's health and safety. Herein, a rapid and low-cost detection method was developed for highly sensitive and selective detection of nitrite based on a surface-enhanced Raman scattering (SERS) sensor combined with electrochemical technology and diazo reaction. In this work, a gold nanoparticle (AuNP)/indium tin oxide (ITO) chip as a superior SERS substrate was obtained by electrochemical self-assembled AuNPs on ITO with the advantages of good uniformity, high reproducibility, and long-time stability. The azo compounds generated from the diazotization-coupling reaction between nitrite, 4-aminothiophenol (4-ATP), and N-(1-naphthyl) ethylenediamine dihydrochloride (NED) in acid condition were further assembled on the surface of AuNP/ITO. The detection of nitrite was realized using a portable Raman spectrometer based on the significant SERS enhancement of azo compounds assembled on the AuNP/ITO chip. Many experimental conditions were optimized such as the time of electrochemical self-assembly and the concentration of HAuCl₄. Under the optimal conditions, the designed SERS sensor could detect nitride in a large linear range from 1.0 × 10^-6 to 1.0 × 10^-3 mol L^-1 with a low limit of detection of 0.33 μmol L^-1. Additionally, nitrite in real samples was further analyzed with a recovery of 95.1-109.7%. Therefore, the proposed SERS method has shown potential application in the detection of nitrite in complex food samples.

Plasmonic Metal Nanoparticles Hybridized with 2D Nanomaterials for SERS Detection: A Review

In SERS analysis, the specificity of molecular fingerprints is combined with potential single-molecule sensitivity so that is an attractive tool to detect molecules in trace amounts. Although several substrates have been widely used from early on, there are still some problems such as the difficulties to bind some molecules to the substrate. With the development of nanotechnology, an increasing interest has been focused on plasmonic metal nanoparticles hybridized with (2D) nanomaterials due to their unique properties. More frequently, the excellent properties of the hybrids compounds have been used to improve the drawbacks of the SERS platforms in order to create a system with outstanding properties. In this review, the physics and working principles of SERS will be provided along with the properties of differently shaped metal nanoparticles. After that, an overview on how the hybrid compounds can be engineered to obtain the SERS platform with unique properties will be given.

Applications of surface-enhanced Raman spectroscopy in environmental detection

As the human population grows, the anthropogenic impacts from various agricultural and industrial processes produce unwanted contaminants in the environment. The accurate, sensitive and rapid detection of such contaminants is vital for human health and safety. Surface-enhanced Raman spectroscopy (SERS) is a valuable analytical tool with wide applications in environmental contaminant monitoring. The aim of this review is to summarize recent advancements within SERS research as it applies to environmental detection, with a focus on research published or accessible from January 2021 through December 2021 including early-access publications. Our goal is to provide a wide breadth of information that can be used to provide background knowledge of the field, as well as inform and encourage further development of SERS techniques in protecting environmental quality and safety. Specifically, we highlight the characteristics of effective SERS nanosubstrates, and explore methods for the SERS detection of inorganic, organic, and biological contaminants including heavy metals, pharmaceuticals, plastic particles, synthetic dyes, pesticides, viruses, bacteria and mycotoxins. We also discuss the current limitations of SERS technologies in environmental detection and propose several avenues for future investigation. We encourage researchers to fill in the identified gaps so that SERS can be implemented in a real-world environment more effectively and efficiently, ultimately providing reliable and timely data to help and make science-based strategies and policies to protect environmental safety and public health.

A fluorescence aptasensor based on carbon quantum dots and magnetic Fe3O4 nanoparticles for highly sensitive detection of 17β-estradiol

Trace amounts of 17β-estradiol (E2) in food and the environment poses a threat to human health, which has created the demand for sensitive analytical methods to detect E2. In this study, a novel fluorescent aptasensor was developed for sensitive detection of E2 based on double-chain hybridization between carbon quantum dots-labelled with E2 aptamer (CQDs-aptamer) and Fe₃O₄ nanoparticles modified by complementary DNA (Fe₃O₄-cDNA). Under the optimal conditions, the aptasensor displayed a good linear range of 10^-11-10^-6 M for E2 with the coefficient of determination (R²) of 0.996, and a low detection limit of 3.48 × 10^-12 M was obtained. Besides, the aptasensor showed high selectivity and good reproducibility for E2 detection, which was successfully applied to the sensitive detection of E2 in milk as compared with tap water and lake water with satisfactory recoveries from 85.21% to 114.80%, suggesting the great significance of this aptasensor for detecting food contaminants in the food industry.

Novel graphene oxide/polymer composite membranes for the food industry: structures, mechanisms and recent applications

The membrane can not only be used as food packaging, but also for the separation, fractionation and recovery of food ingredients. Graphene oxide (GO) sheets are a two-dimensional (2 D) material with a unique structure that exhibit excellent mechanical properties, biocompatibility, and flexibility. The corporation of polymer matrix membrane with GO can significantly improve the permeability, selectivity, and antibacterial activity. In this review, the chemical structures of GO, GO membranes and GO/polymer composite membranes are introduced, the permeation mechanisms of molecules through the membranes are discussed and key factors affecting the permeability are presented in detail. In addition, recent applications in the food industry for filtration, bioreactions and active food packaging are analyzed, and limitations and future trends of GO membranes development are also highlighted. GO/polymer composite membranes exhibit excellent permeability, selectivity and strong barrier properties against bacterial and gas permeation. However, current food material filtration and packaging applications of GO/polymer composite membranes are still in the laboratory stage. Future work can focus on the development of large scale uniformly sized GO production, the homogeneous distribution and tight combination of GO in polymer matrixes, the sensing function of GO in packaging, and the verification method of GO toxicology.

Large-Area Monolayer Films of Hexagonal Close-Packed Au@Ag Nanoparticles as Substrates for SERS-Based Quantitative Determination

In this work, quasi-spherical, small-sized, citrate-stabilized, core-shell (CS)-structured Au_5.5@Ag_m nanoparticles (NPs) with Ag shells of controlled thicknesses (m = 0, 1.25, 3.25, and 5.25) were successfully synthesized by using Au NPs with sizes of 5.5 nm as seeds. The as-prepared Au@Ag NPs after the phase transfer process were further used for the fabrication of high-quality large-area monolayer films of hexagonal close-packed Au@Ag nanoparticles (LAMF-HCP-Au@Ag NPs) by our improved self-assembly at the interface of toluene-DEG containing a proper amount of water (10% v/v). Moreover, after transferring the as-prepared LAMF-HCP-Au@Ag NPs onto polydimethylsiloxane (PDMS) substrates (LAMF-HCP-Au@Ag NP@PDMS substrates), the resulting LAMF-HCP-Au@Ag NP@PDMS substrates can exhibit uniformity in the intensity of the surface-enhanced Raman scattering signals. Furthermore, taking LAMF-HCP-Au_5.5@Ag_5.25 NP@PDMS substrates as an example, they can achieve quantitative detection with high sensitivity for crystal violet (CV) and 4-aminothiophenol (4-ATP) in the range from 10^-12 to 10^-7 M and from 10^-13 to 10^-7 M, respectively. Also, their limit of detection (LOD) for CV and 4-ATP are 10^-12 and 10^-13 M, respectively. Especially, the LOD for CV can also be as low as 10^-13 M by extending the immersing time.

Interfacing metal-polyphenolic networks upon photothermal gold nanorods for triplex-evolved biocompatible bactericidal activity

Gold nanorods (GNRs) outstand in photothermal disinfection but are faced with severe surface chemistry and dose relevant biotoxicity. Herein, a naturally green building block, metal-phenolic networks (MPNs), was employed to functionalize GNRs via coordination reaction, yielding a tunable and biocompatible core-shell photothermal nano-bactericide (GNRs@MPNs). The bioactive GNRs@MPNs built with iron and polyphenols (tannic acid, epigallocatechin gallate, and procyanidins) exhibited superior light-to-heat conversion efficiencies with η = 29.29-44.00%, remarkably preceding that of GNRs (η = 12.24%), which could rapidly ablate 99.8% of Escherichia coli O157: H7 and 98.6% of Staphylococcus aureus bacteria in relatively low efficacy doses (10 ppm of Au). Moreover, local heat triggered by GNRs@MPNs accelerated the healing of the cutaneous wound of a mice model infected by methicillin-resistant S. aureus. The facile synthesis, photothermal synergy, polyphenolic bioactivity, and significantly low efficacy dose of GNRs@MPNs empower them satisfactory efficiency and biosafety in the future broad-spectrum photothermal sterilization applications.

Ti3C2Tx MXenes loaded with Au nanoparticle dimers as a surface-enhanced Raman scattering aptasensor for AFB1 detection

Mycotoxin B1 (AFB1) contamination in agricultural products pose a deadlydangertoanimal and human health and its rapid and reliable detection is thus very important. Herein, a ratiometric surface-enhanced Raman scattering (SERS) aptasensor for AFB1 detection was developed, in which 1,2-bis(4-pyridyl) ethylene (BPE) was used to trigger the assembly of Au nanoparticle dimers (AuNP dimers) and form intensive SERS "hot spots", and MXenes nanosheets could load aptamer-modified AuNP dimers due to the hydrogen bonding and the chelation between the phosphate groups of aptamers and the Ti ion of MXenes. With the presence of AFB1 preferentially binding to AFB1 aptamer, AuNP dimers were separated from MXenes nanosheets, leading to a decrease in SERS intensity. Regression analysis in the range from 0.001 to 100 ng·mL^-1 showed the limit of detection (LOD) being 0.6 pg·mL^-1 in standard solution, indicating that the great prospects of the AuNP dimers/MXenes SERS substrate for detecting AFB1.

Robotic written silver ink on photographic paper for detection of thiram residues in fruits

With the widespread application of pesticide in agriculture, pesticide residues in food have posed serious health risks to human. There is an urgent requirement to detect pesticide residues in food. In this work, a sensitive and effective method was employed to measure thiram residues in fruit using surface-enhanced Raman scattering (SERS) technique. Silver ink was written on photographic paper (AgNPs-photographic paper) directly by robotic writing technique. The AgNPs-photographic paper substrates possessed good SERS activities and high stability among four months. A good linear response between the peaks intensities and the logarithmic concentrations of thiram was obtained with the limit of detection (LOD) of 0.024 ppb. The substrates also exhibited excellent reproducibility with relative standard deviation (RSD) value less than 10% from ten different substrates. SERS mapping was tested to characterize the uniformity of AgNPs-photographic paper, and the RSD value was calculated to be 14.34% at 1377 cm^-1 measured by 120 points. The LOD values of apple and peach juice adulterated with thiram were 0.0024 and 0.024 ppm, respectively. The LOD values of thiram residues on apple and peach peels were both 0.25 ng/cm². It was demonstrated that the substrates prepared by robotic writing technique had great potential for practical application in food safety inspection.

Metal coordination induced SERS nanoprobe for sensitive and selective detection of histamine in serum

Sensitivity and credibility detecting histamine (HA) as an important neurotransmitter in biofluids is of importance in analytical science and physiology. Surface-enhanced Raman spectroscopy (SERS) is able to realize the high sensitivity with single molecules level, but providing the high sensitivity for HA with a small cross section remains a challenge. Here we develop the metal complex-based SERS nanoprobe nitrilotriacetic acid-Ni²⁺ (NTA-Ni²⁺) combined with self-assemble Au NPs active substrates for sensitive detection of HA. The NTA-Ni²⁺ can capture the HA molecules close to Au NPs substrates and then amplify the Raman signals of HA owing to the formation of a complex of NTA-Ni²⁺-HA. The self-assemble Au film through the evaporation-driven method can provide the high-density hot spots substrate with high stability and reproducibility. The NTA-Ni²⁺ decorated Au NPs as nanoprobe responds to HA with 1 μM level of sensitivity. More importantly, the developed SERS nanoprobe composing of NTA-Ni²⁺ and self-assemble Au NPs can be utilized to detect and monitor the HA spiked into serum, indicating the potential prospect in analysis of HA in complex specimen.

Facile synthesis of silver nanocatalyst decorated Fe3O4@PDA core–shell nanoparticles with enhanced catalytic properties and selectivity

In this work, we have successfully prepared core–shell nanoparticles (Fe₃O₄@PDA) wrapped with Ag using a simple and green synthesis method. Without an external reducing agent, silver nanoparticles (Ag NPs) with good dispersibility were directly reduced and deposited on a polydopamine (PDA) layer. Fe₃O₄@PDA@Ag showed excellent catalytic activity and recyclability for 4-nitrophenol, and also exhibited good catalytic selectivity for organic dyes (MO and MB). This simple and green synthesis method will provide a platform for other catalytic applications.

In this work, we have successfully prepared core–shell nanoparticles (Fe₃O₄@PDA) wrapped with Ag using a simple and green synthesis method.

A dual AE-GAN guided THz spectral dehulling model for mapping energy and moisture distribution on sunflower seed kernels

Energy and moisture contents are important food chemical attributes. In the current study, a nondestructive Terahertz (THz) time-domain imaging system was first time used for evaluating the energy and moisture distributions of sunflower seed kernels inside shells. For this task, a dual autoencoders (AE)-generative adversarial nets (GAN) spectral dehulling semi-supervised model was developed. The model could automatically learn the kernel information from the latent representations of the spectra of the intact seeds through adversarial learning to achieve feature disentanglement. Results indicated that the generated kernel images had similar features to the original kernel images and high-quality chemical distribution maps for energy and moisture contents of sunflower seed kernels inside shells were successfully obtained. As the current method took the advantage of the characteristics of THz imaging and selected a suitable deep learning algorithm, it has the potential to generalize for imaging other chemical substances of other dry shelled seeds or biological samples (moisture content and thickness below 15% and 5 mm, respectively).

Reliable SERS detection of pesticides with a large-scale self-assembled Au@4-MBA@Ag nanoparticle array

The fabrication of sensitive and reliable interfacial plasmonic platform for measuring chemical contaminants in various phases is an exciting topic in the food industry and for environment monitoring. In this study, a high-performance surface-enhanced Raman spectroscopy (SERS) analytic platform was developed through self-assembly of the gold@4-mercaptobenzoic acid@silver nanoparticles (Au@4-MBA@Ag NPs) at the cyclohexane/water interface. By addition of the inducer ethanol, the Au@4-MBA@Ag NPs in aqueous phase was effectively migrated to the biphasic interface, forming a large-scale close-packed nanoparticle array. The average gap between adjacent nanoparticles was smaller than 3 nm, where intensive SERS "hot spots" were created for high-sensitive detection. Furthermore, using the sandwiched 4-MBA molecule as the internal standard to correct the Raman signal fluctuations, the point-to-point and batch-to-batch reproducibility of Au@4-MBA@Ag array were improved with lower relative standard deviation (RSD) values of 8.84% and 14.97%, respectively, and pesticides (thiram and thiabendazole) analysis in both aqueous and organic phases were achieved with higher accuracy (R² of 0.986 and 0.990) as compared with those without 4-MBA correction (R² of 0.867 and 0.974). The high-throughput fabrication of the self-assembled nanoparticle array is a promising approach for development of a sensitive and reliable SERS platform for chemical contaminants monitoring in multiphase.

Surface Enhanced Raman Spectroscopy: Applications in Agriculture and Food Safety

Recent global warming has resulted in shifting of weather patterns and led to intensification of natural disasters and upsurges in pests and diseases. As a result, global food systems are under pressure and need adjustments to meet the change—often by pesticides. Unfortunately, such agrochemicals are harmful for humans and the environment, and consequently need to be monitored. Traditional detection methods currently used are time consuming in terms of sample preparation, are high cost, and devices are typically not portable. Recently, Surface Enhanced Raman Scattering (SERS) has emerged as an attractive candidate for rapid, high sensitivity and high selectivity detection of contaminants relevant to the food industry and environmental monitoring. In this review, the principles of SERS as well as recent SERS substrate fabrication methods are first discussed. Following this, their development and applications for agrifood safety is reviewed, with focus on detection of dye molecules, melamine in food products, and the detection of different classes of pesticides such as organophosphate and neonicotinoids.

In-Situ Synthesis of Methyl Cellulose Film Decorated with Silver Nanoparticles as a Flexible Surface-Enhanced Raman Substrate for the Rapid Detection of Pesticide Residues in Fruits and Vegetables

The purpose of this study was to develop a flexible substrate methylcellulose-decorated silver nanoparticles (MC/Ag NPs) film and explore its application in fruits and vegetables by surface enhanced Raman spectroscopy (SERS) technology for rapid detection of pesticides. The performance of the MC/Ag NPs film substrate was characterized by Nile blue A (NBA), and the detection limit was as low as 10⁻⁸ M. The substrate also exhibited satisfactory Raman signal strength after two months of storage. The impressive sensitivity and stability were due to the excellent homogeneity of the silver nanoparticles that were grown in situ in the methylcellulose matrix, which generated “hot spots” between the silver nanoparticles without a large amount of aggregation, and resulted in the ultra-high sensitivity and excellent stability of the MC/Ag NPs film substrate. The MC/Ag NPs film substrate was used to detect thiram pesticides on tomato and cucumber peels, and the minimum detectable level of thiram was 2.4 ng/cm², which was much lower than the maximum residue level. These results indicate that the MC/Ag NPs film is sensitive to rapid detection of multiple pesticides in food.

Macroscopical monolayer films of ordered arrays of gold nanoparticles as SERS substrates for in situ quantitative detection in aqueous solutions

In this work, macroscopical monolayer films of ordered arrays of gold nanoparticles (MMF-OA-Au NPs) are successfully prepared at the interfaces of toluene-diethylene glycol (DEG) with a water volume fraction of 10% (no more than 25%), which can greatly reduce the electrostatic repulsion among NPs during the self-assembly due to the quick transfer of the remaining citrate ions into the DEG solutions containing water. Thanks to the uniformity in the intensity of SERS signals, the as-prepared MMF-OA-Au NPs transferred onto polydimethylsiloxane (PDMS) as SERS substrates (MMF-OA-Au NP@PDMS) can achieve in situ quantitative detection of the analytes (such as crystal violet and malachite green) in aqueous solutions. Moreover, MMF-OA-Au NP@PDMS as SERS-based pH sensors can directly determine the pH value of the aqueous solution in the range of 3 to 10 by means of the established well-defined linear relationship with the intensity of the peak of νCOO^- without any calibration, instead of the intensity ratio of the Raman peaks of νCOO^- to ν8a with further calculation. In addition, the as-prepared SERS-based pH sensors can still have excellent long-term durability.

Transparent, Flexible Plasmonic Ag NP/PMMA Substrates Using Chemically Patterned Ferroelectric Crystals for Detecting Pesticides on Curved Surfaces

Transparent and flexible surface-enhanced Raman scattering (SERS) substrates have attracted much interest for the detection of probe molecules on the curved surfaces of real samples, but a facile route to fabricate such substrates is still lacking. Herein, we present a rationally designed, high-performance flexible SERS substrate fabricated using a simple drop and peel-off technique for the ultrasensitive detection of pesticides. The proposed SERS substrate consists of a polymethyl methacrylate (PMMA) film anchored with plasmonic silver nanoparticles (Ag NPs), which are photoreduced using chemically patterned ferroelectric templates. The photoreduced Ag NPs extracted onto the PMMA film offer strong electromagnetic enhancement and produce intensive hotspots for the effective enhancement of the Raman signal. They provide superior SERS performance for the detection of parathion (PT) and fenitrothion (FNT) at trace-level concentrations of 10^-9 M and 10^-10 M with excellent enhancement factors in the order of 10⁸ and 10⁹, respectively. Moreover, the Ag NP/PMMA SERS substrate has good spot-to-spot uniformity and batch-to-batch reproducibility with the reservation of high detection sensitivity even after the mechanical deformation of bending and torsion up to 50 cycles. The multiplex detection ability is also investigated for the simultaneous detection of PT and FNT. To ensure the practical feasibility, the in-situ, real-time detection of PT and FNT on the curved surfaces of tomato and lemon using a fiber-coupled Raman probe is performed with limits of detection of 4.24 × 10^-8 M and 2.74 × 10^-9 M. The proposed Ag NP/PMMA flexible SERS substrate possesses unique features, such as easy fabrication through a simple, economical, rapid process, and facilitates straightforward implementation of in-situ SERS detection on curved fruit/vegetable surfaces.

Recent developments in Raman spectral analysis of microbial single cells: Techniques and applications

The conventional microbial cell analyses are mostly population-averaged methods that conceal the characteristics of single-cell in the community. Single-cell analysis can provide information on the functional and structural variation of each cell, resulting in the elimination of long and tedious microbial cultivation techniques. Raman spectroscopy is a label-free, noninvasive, and in-vivo method ideal for single-cell measurement to obtain spatially resolved chemical information. In the current review, recent developments in Raman spectroscopic techniques for microbial characterization at the single-cell level are presented, focusing on Raman imaging of single cells to study the intracellular distribution of different components. The review also discusses the limitation and challenges of each technique and put forward some future outlook for improving Raman spectroscopy-based techniques for single-cell analysis. Raman spectroscopic methods at the single-cell level have potential in precision measurements, metabolic analysis, antibiotic susceptibility testing, resuscitation capability, and correlating phenotypic information to genomics for cells, the integration of Raman spectroscopy with other techniques such as microfluidics, stable isotope probing (SIP), and atomic force microscope can further improve the resolution and provide extensive information. Future focuses should be given to advance algorithms for data analysis, standardized reference libraries, and automated cell isolation techniques in future.

Self-assembled nano-Ag/Au@Au film composite SERS substrates show high uniformity and high enhancement factor for creatinine detection

Serum creatinine is a key biomarker for the diagnosis and monitoring of kidney disease. Rapid and sensitive creatinine detection is thus important. Here, we propose a high-performance nano-Ag/Au@Au film composite SERS substrate for the rapid detection of creatinine in human serum. Au nanoparticles (AuNPs) and Ag nanoparticles (AgNPs) with uniform particle size were synthesized by a chemical reduction method, and the nano-Ag/Au@Au film composite SERS substrate was successfully prepared via a consecutive layer-on-layer deposition using an optimized liquid-liquid interface self-assembly method. The finite element simulation analysis showed that due to the multi-dimensional plasmonic coupling effect formed between the AuNPs, AgNPs, and the Au film, the intensity of the local electromagnetic field was greatly improved, and a very high enhancement factor (EF) was obtained. Experimental results showed that the limit of detection (LOD) of this composite SERS substrate for rhodamine 6G (R6G) molecules was as low as 1 × 10^-13M, and the Raman EF was 15.7 and 2.9 times that of the AuNP and AgNP monolayer substrates respectively. The results of different batch tests and SERS mapping showed that the relative standard deviations of the Raman intensity of R6G at 612 cm^-1were 12.5% and 11.7%, respectively. Finally, we used the SERS substrate for the label-free detection of human serum creatinine. The results showed that the LOD of this SERS substrate for serum creatinine was 5 × 10^-6M with a linear correlation coefficient of 0.96. In conclusion, the SERS substrate has high sensitivity, good uniformity, simple preparation, and has important developmental potential for the rapid detection and application of disease biomarkers.

Synthesis of bimetallic core-shelled nanoparticles modified by 2-mercaptoethanol as SERS substrates for detecting ferbam and thiabendazole in apple puree

Modification of surface-enhanced Raman spectroscopy (SERS) substrates with thiol ligands is an emerging approach in enhancing the stability and sensitivity of metal substrates due to their good affinity with metals such as Au, Ag, and Cu. Thus, in the current study, 2-mercaptoethanol was used to modify the surface of silver-coated gold nanoparticles to develop a novel SERS substrate for the rapid assessment of fungicide residues in fruit samples. Results showed that the substrate could achieve the detection of ferbam and thiabendazole residues in apple puree with limits of detection of approximately 0.0042 and 0.0064 ppm, high coefficients of determination of 0.9946 and 0.9968, good recoveries ranging from 80 to 105 and 81 to 107% and relative standard deviations of 3.5-7.5 and 3.8-7.9 %, respectively. Therefore, the substrate developed could potentially be utilised to assess other toxic agrochemicals in future.

Spatiotemporal Visualization of Insecticides and Fungicides within Fruits and Vegetables Using Gold Nanoparticle-Immersed Paper Imprinting Mass Spectrometry Imaging

Food safety issues caused by pesticide residue have exerted far-reaching impacts on human daily life, yet the available detection methods normally focus on surface residue rather than pesticide penetration to the internal area of foods. Herein, we demonstrated gold nanoparticle (AuNP)-immersed paper imprinting mass spectrometry imaging (MSI) for monitoring pesticide migration behaviors in various fruits and vegetables (i.e., apple, cucumber, pepper, plum, carrot, and strawberry). By manually stamping food tissues onto AuNP-immersed paper, this method affords the spatiotemporal visualization of insecticides and fungicides within fruits and vegetables, avoiding tedious and time-consuming sample preparation. Using the established MSI platform, we can track the migration of insecticides and fungicides into the inner region of foods. The results revealed that both the octanol-water partition coefficient of pesticides and water content of garden stuffs could influence the discrepancy in the migration speed of pesticides into food kernels. Taken together, this nanopaper imprinting MSI is poised to be a powerful tool because of its simplicity, rapidity, and easy operation, offering the potential to facilitate further applications in food analysis. Moreover, new perspectives are given to provide guidelines for the rational design of novel pesticide candidates, reducing the risk of food safety issues caused by pesticide residue.

In-fiber optofluidic online SERS detection of trace uremia toxin

In this Letter, we propose a microstructured in-fiber optofluidic surface-enhanced Raman spectroscopy (SERS) sensor for the initial inspection of uremia through the detection of unlabeled urea and creatinine. As a natural microfluidic device, microstructured hollow fiber has a special structure inside. Through chemical bonds, the SERS substrate can be modified and grown on the surface of the suspended core. Here, the silver nanoparticles (Ag NPs) are embedded on the poly diallyl dimethyl ammonium chloride-modified graphene oxide sheet to achieve the self-assembled SERS substrate. The reduced distance between Ag NPs can increase the strong hot spots that generate enhanced Raman signals. Therefore, it can effectively detect the Raman signal of unlabeled trace uremic toxin analytes (urea, creatinine) inside the optical fiber. The results show that under simulated biophysical conditions, the limit detection (LOD) for urea is 10-4M and the linearity is good, especially at the clinical conventional concentration range (2.5-6.5×10-3M). In addition, the online Raman detection of creatinine aqueous solution LOD is 10-6M, which also has good linearity. Significantly, this Letter provides a microstructured optofluidic in-fiber Raman sensor for the preliminary detection of uremia, which will have good development prospects in the field of clinical biomedicine.