Advances in solvent-microextraction techniques

Butan-1-ol as an extractant solvent in dispersive liquid-liquid microextraction in the spectrophotometric determination of aluminium

Determining aluminium ions at μg L^-1 scale currently requires either costly analytical techniques such as inductively coupled plasma, and/or graphite furnace atomic absorption spectrometry. Dispersive liquid-liquid microextraction (DLLME) is designed to promote separation and preconcentration, thus making it possible to determine the analyte of interest without significant matrix influence. This study was aimed at the development of a spectrophotometric method to determine Al³⁺ after microextraction of its complex with quercetin. Butan-1-ol was used as a novel extractant solvent in the DLLME process. The parameters influencing complexation and microextraction, such as the amount of quercetin and volume of extractant were evaluated by univariate analysis. In optimised conditions were estimated for the proposed method: linear range from 7.5 to 165.0 μg L^-1, LOD of 2.0 μg L^-1, and LOQ of 7.0 μg L^-1. The accuracy was checked by applying the proposed method to water (NIST SRM-1643e) and rice flour (NIST SRM-1568c) certified reference materials and spike-and-recovery trials with distinct samples (mineral water, green tea, thermal spring water, contact lens disinfecting solution, saline concentrate for hemodialysis and urine).

Solvent Bar Micro-Extraction of Heavy Metals from Natural Water Samples Using 3-Hydroxy-2-Naphthoate-Based Ionic Liquids

Developments in the liquid micro-extraction of trace metals from aqueous phases have proven to be limited when extended from pure water to more complex and demanding matrices such as sea water or wastewater treatment effluents. To establish a system that works under such matrices, we successfully tested three task-specific ionic liquids, namely trihexyltetradecyl- phosphonium-, methyltrioctylphosphonium- and methyltrioctylammonium 3-hydroxy-2-naphthoate in two-phase solvent bar micro-extraction (SBME) experiments. We describe the influence of pH, organic additives, time, stirring rate and volume of ionic liquid for multi-elemental micro-extraction of Cu, Ag, Cd and Pb from various synthetic and natural aqueous feed solutions. Highest extraction for all metals was achieved at pH 8.0. Minimal leaching of the ionic liquids into the aqueous phase was demonstrated, with values < 30 mg L⁻¹ DOC in all cases. Sample salinities of up to 60 g L⁻¹ NaCl had a positive effect on the extraction of Cd, possibly due to an efficient extraction mechanism of the present chlorido complexes. In metal-spiked natural feed solutions, the selected SBME setups showed unchanged stability under all conditions tested. We could efficiently (≥85%) extract Cu and Ag from drinking water and achieved high efficacies for Ag and Cd from natural sea water and hypersaline water, respectively. The method presented here proves to be a useful tool for an efficient SBME of heavy metals from natural waters without the need to pretreat or modify the sample.

Sensitive and rapid determination of pyrethroids in human blood by gas chromatography-tandem mass spectrometry with ultrasound-assisted dispersive liquid-liquid microextraction

In this study, a sensitive and fast procedure of ultrasonic-assisted dispersive liquid-liquid microextraction (UADLLME) coupled with gas chromatography-tandem mass spectrometry (GC-MS/MS) for the determination of major pyrethroid pesticides (permethrin, tetramethrin, bifenthrin, fenvalerate, flucythrinate, fluvalinate, fenpropathrin, deltamethrin, and cyhalothrin) in blood samples was developed. Response surface methodology (RSM) combined with Box-Behnken design (BBD) and ANOVA function was used to optimize key factors affecting the extraction efficiency of UADLLME procedure. Target compounds were analyzed by GC-MS/MS. Under the optimal conditions, good linearity (R2 >0.99) was achieved for all the analytes in the concentration range of 0.5 to 100 μg L-1 . The recoveries for spiked samples at 3 concentration levels were between 70.2 and 91.8%, with relative standard deviations (RSD) lower than 10%. Very low limits of detection (LODs) and limits of quantification (LOQs) ranging from 0.01 to 0.1 μg L-1 and from 0.03 to 0.3 μg L-1 were achieved. This method was successfully applied to the determination of low concentration of pyrethroids in blood samples from real forensic cases. High sensitivity, fast determination, simplicity in operation, small sample volume, and low usage of organic solvents are the advantages of this method. This methodology is of important value for sensitive and quick determination of residue pesticides and metabolites, study of residue pesticides behavior in human body, as well as application in real forensic cases.

Hollow-Fibre-Supported Dispersive Liquid-Liquid Microextraction for Determination of Atrazine and Triclosan in Aqueous Samples

We report the application of the dispersive liquid-liquid microextraction coupled to hollow-fibre membrane-assisted liquid-phase microextraction and its application for extraction of atrazine and triclosan. Under optimum conditions, namely, 25 μL of a 1 : 4 chlorobenzene : ethyl acetate mixture dispersed in 1 mL of aqueous sample, 10% (m/v) NaCl, a magnetic stirrer speed at 600 rpm, and 10 minutes' extraction time with toluene-filled fibre as the acceptor phase, the method demonstrates sufficient figures of merit. These include linearity (R² ≥ 0.9975), intravial precision (%RSD ≤ 7.6), enrichment factors (127 and 142), limits of detection (0.0081 and 0.0169 µg/mL), and recovery from river water and sewerage (96–101%). The relatively high detection limits are attributed to the flame ionization detector which is less preferred than a mass spectrometer in trace analyses. This is the first report of a homogenous mixture of the dispersed organic solvent in aqueous solutions and its employment in extraction of organic compounds from aqueous solutions. It therefore adds yet another candidate in the pool of miniaturised solvent microextraction techniques.

Solvent bar micro-extraction (SBME) based determination of PAHs in seawater samples

Measuring the impact of PAHs in seawater samples is often difficult due to the low concentrations in which they appear and the complexity of the sample matrix. Traditional methods for sample preparation such as liquid-liquid extraction and solid phase extraction require the use of excessive amounts of solvents and reagents, and sample handling. In this work, hollow fiber liquid phase micro-extraction (HFLPME), in the configuration of solvent bar micro-extraction (SBME), was proposed as an environmentally friendly and more effective tool, for the extraction of the 16 priority PAHs from seawater samples. Extraction was conducted using hexane as a solvent. Enrichment factors from 45 to 163 were obtained after 60min at a stirring rate of 500rpm in the sample. Moreover, a negative linear relationship was observed between the enrichment factor and the molecular weight of the PAHs. Under optimized conditions, the limits of detection were in the range from 0.21 to 0.82ngL^-1, the method showed a linear response up to 500μgL^-1, and the average relative standard deviation for seawater samples spiked with 5ngL^-1 was 11.6%. After calibration, the SBME was applied to extract PAHs in seawater samples from the Bay of Cadiz (SW Spain), showing an average recovery of 99%. In conclusion, the SBME is an environmentally friendly, one-step alternative for sample preparation in the determination of PAHs in seawater samples.

Monitoring trihalomethanes in chlorinated waters using a dispersive liquid-liquid microextraction method with a non-chlorinated organic solvent and gas chromatography-mass spectrometry

The environmental monitoring of trihalomethanes (THMs) has been performed by setting up a dispersive liquid-liquid microextraction method in combination with gas chromatography (GC)-mass spectrometry (MS). The optimized method only requires ∼26 µL of decanol as extractant solvent, dissolved in ∼1 mL of acetone (dispersive solvent) for 5 mL of the environmental water containing THMs. The mixture is then subjected to vortex for 1 min and then centrifuged for 2 min at 3500 rpm. The microdroplet containing the extracted THMs is then sampled with a micro-syringe, and injected (1 µL) in the GC-MS. The method is characterized for being fast (3 min for the entire sample preparation step) and environmentally friendly (low amounts of solvents required, being all non-chlorinated), and also for getting average relative recoveries of 90.2-106% in tap waters; relative standard deviation values always lower than 11%; average enrichment factors of 48-49; and detection limits down to 0.7 µg·L-1. Several waters: tap waters, pool waters, and wastewaters were successfully analyzed with the method proposed. Furthermore, the method was used to monitor the formation of THMs in wastewaters when different chlorination parameters, namely temperature and pH, were varied.

A Review of Extraction and Analytical Methods for the Determination of Tartrazine (E 102) in Foodstuffs

Tartrazine is an azo food dye, which is orange-colored and water soluble. It is usually used in foods, pharmaceuticals, cosmetics, and textiles. Tartrazine has the potential to cause an adverse health effect on humans, such as hyperactivity in children, allergy, and asthma. Joint FAO/WHO Expert Committee on Food Additive and EU Scientific Committee for Food have standardized the acceptable daily intake for tartrazine that is 7.5 mg kg^-1 body weight. Many researchers have detected the presence of tartrazine for monitoring the quality and safety of food products. In this review paper, we highlighted various tartrazine detection and extraction methods. Some of the analytical methods are available such as high-performance liquid chromatography, electrochemical sensor, thin-layer chromatography, spectrophotometry, capillary electrophoresis, and liquid chromatography-tandem mass spectrometry. Also, we discuss following extraction steps: liquid-liquid extraction, solid-phase extraction, membrane filtration, cloud point extraction, and other extraction method. In addition, a brief overview is presented explaining the synthesis process and metabolism of tartrazine and the maximum permitted level in different countries. This review paper will give an insight into different extraction and analytical methods for the determination of tartrazine in healthy foods, which will attract the attention of public toward food safety and quality, and also the interest of food industry and government bodies.

An improved microscale method for extraction of phenolic acids from maize

BACKGROUND

Phenolic acids are a major group of secondary metabolites widely distributed in plants. In the case of maize, the major proportion of these metabolites occurs in the edible grain and their antioxidant activities are associated with improvements in human health. However, conventional extraction of secondary metabolites is very time consuming and generates a substantial amount of solvent waste. One approach to resolve these limitations is the use of microscale approaches, which minimize the quantity of solvents required, as well as the sample amounts and processing times. The objective of this work was to develop an improved microscale method for extraction of phenolic acids from maize and to compare it with a conventional extraction method.

RESULTS

The improved microscale extraction method, coupled with an HPLC-DAD detection method, allowed identification of ferulic acid, p-coumaric acid in its free and bound form, and some diferulic acids. In its free form, p-coumaric acid ranged in content from 2.4 to 6.5 µg/g dry weight (dw) using the conventional method and 7.7 to 54.8 µg/g dw using the improved microscale method. Free ferulic acid content ranged from 2.6 to 12.9 µg/g dw for the conventional method and 16.8 to 181.7 µg/g dw for the improved microscale method. In its bound form, p-coumaric acid ranged in content from 6.0 to 30.6 µg/g dw for the traditional method and 34.4 to 138.6 µg/g dw for the improved microscale method. Bound ferulic acid ranged from 131.8 to 427.5 µg/g dw for the conventional method and 673.8 to 1702.7 µg/g dw for the improved microscale method. The coefficient of variation associated was lower for the improved microscale method than for the conventional method, thereby assuring the replicability of the process.

CONCLUSIONS

The improved microscale method proposed here increases the extraction power and batch capacity, while reducing the sample quantity, solvent amounts and extraction time. It also achieves a better replicability with a lower coefficient of variation than is possible with conventional extraction.

Sensitive determination of methadone in human serum and urine by dispersive liquid-liquid microextraction based on the solidification of a floating organic droplet followed by HPLC-UV

Dispersive liquid-liquid microextraction based on solidification of floating organic droplet was developed for the extraction of methadone and determination by high-performance liquid chromatography with UV detection. In this method, no microsyringe or fiber is required to support the organic microdrop due to the usage of an organic solvent with a low density and appropriate melting point. Furthermore, the extractant droplet can be collected easily by solidifying it at low temperature. 1-Undecanol and methanol were chosen as extraction and disperser solvents, respectively. Parameters that influence extraction efficiency, i.e. volumes of extracting and dispersing solvents, pH, and salt effect, were optimized by using response surface methodology. Under optimal conditions, enrichment factor for methadone was 134 and 160 in serum and urine samples, respectively. The limit of detection was 3.34 ng/mmL in serum and 1.67 ng/mL in urine samples. Compared with the traditional dispersive liquid-liquid microextraction, the proposed method obtained lower limit of detection. Moreover, the solidification of floating organic solvent facilitated the phase transfer. And most importantly, it avoided using high-density and toxic solvents of traditional dispersive liquid-liquid microextraction method. The proposed method was successfully applied to the determination of methadone in serum and urine samples of an addicted individual under methadone therapy.

In situ derivatization-ultrasound-assisted dispersive liquid-liquid microextraction for the determination of neurotransmitters in Parkinson's rat brain microdialysates by ultra high performance liquid chromatography-tandem mass spectrometry

Simultaneous monitoring of several neurotransmitters (NTs) linked to Parkinson's disease (PD) has important scientific significance for PD related pathology, pharmacology and drug screening. A new simple, fast and sensitive analytical method, based on in situ derivatization-ultrasound-assisted dispersive liquid-liquid microextraction (in situ DUADLLME) in a single step, has been proposed for the quantitative determination of catecholamines and their biosynthesis precursors and metabolites in rat brain microdialysates. The method involved the rapid injection of the mixture of low toxic bromobenzene (extractant) and acetonitrile (dispersant), which containing commercial Lissamine rhodamine B sulfonyl chloride (LRSC) as derivatization reagent, into the aqueous phase of sample and buffer, and the following in situ DUADLLME procedure. After centrifugation, 50μL of the sedimented phase (bromobenzene) was directly injected for ultra high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) detection in multiple reaction monitoring (MRM) mode. This interesting combination brought the advantages of speediness, simpleness, low matrix effects and high sensitivity in an effective way. Parameters of in situ DUADLLME and UHPLC-MS/MS conditions were all optimized in detail. The optimum conditions of in situ DUADLLME were found to be 30μL of microdialysates, 150μL of acetonitrile containing LRSC, 50μL of bromobenzene and 800μL of NaHCO3-Na2CO3 buffer (pH 10.5) for 3.0min at 37°C. Under the optimized conditions, good linearity was observed with LODs (S/N>3) and LOQs (S/N>10) of LRSC derivatized-NTs in the range of 0.002-0.004 and 0.007-0.015 nmol/L, respectively. It also brought good precision (3.2-12.8%, peak area CVs%), accuracy (94.2-108.6%), recovery (94.5-105.5%) and stability (3.8-8.1%, peak area CVs%) results. Moreover, LRSC derivatization significantly improved chromatographic resolution and MS detection sensitivity of NTs when compared with the reported studies through the introduction of a permanent charged moiety from LRSC into NTs. Taken together, this in situ DUADLLME method was successfully applied for the simultaneous determination of six NTs in biological samples.

Solvent bar micro-extraction with graphite atomic absorption spectrometry for the determination of silver in ocean water

Main drawbacks for silver determination in seawater are the effects of samples matrix and that Ag appears in the sub ng L(-1). Available methods for sample preparation in Ag analysis are based on solid and liquid extraction using tedious process that increase the cost of analysis and the risk of sample contamination, producing important waste amounts. Solvent bar micro-extraction (SBME) allows the pre-concentration of Ag in a micro-volume of the ionic liquid Aliquat 336® in kerosene solution. For this reason, it is considered as a green alternative to standard methods. The method has been optimized using synthetic seawater samples, offering the highest response for samples at pH=2, using 5% Aliquat 336® dissolved in kerosene containing 5% dodecan-1-ol as acceptor solution and after 1h stirring at 800rpm. The method exhibited linearity up to 50ngL(-1), with a limit of detection of 0.09ngL(-1), covering the concentration range of interest for environmental studies. Finally, it was applied for determination of Ag in real seawater samples, and the results were compared with the reference method of liquid-liquid extraction with 1-pyrrolidine-dithiocarbamate and diethylammonium-diethyldithiocarbamate, showing the applicability of ionic liquid based SBME using Aliquat 336(®) for the simple monitoring of silver ultra-traces in seawater analysis.

An automatic stirring-assisted liquid-liquid microextraction system based on lab-in-syringe platform for on-line atomic spectrometric determination of trace metals

A novel simple fully automatic on-line magnetic stirring-assisted liquid-liquid microextraction method, based on the lab-in-syringe (LIS) concept, has been developed as an alternative approach for sample pretreatment and atomic spectrometric assays. The analytical process includes the in-syringe reaction of the metal ion with the chelating reagent, the analyte micro-extraction and the subsequent transportation of the extractant to the detection system for electrothermal atomic absorption spectrometric (ETAAS) quantification. This novel platform has been demonstrated for trace silver determination in various types of water samples. The method is linear from 19 to 450ngL^-1 using a small volume of extraction solvent of 120μL. The entire procedure is accomplished within 240s resulting in a sampling frequency of 15h^-1. The enhancement factor is 80, while the detection limit and the precision are 5.7ngL^-1 and 3.3%, respectively. The developed method was evaluated by analyzing standard reference materials and spiked water samples with satisfactory recoveries.

Detection of triazole pesticides in environmental water and juice samples using dispersive liquid–liquid microextraction with solidified sedimentary ionic liquids

The solidification of a sedimentary ionic liquid, [P₄₄₄₈][PF₆], was used to simplify the extraction process for the detection of triazole pesticides.