The second stalk of Escherichia coli ATP synthase

F0F1-ATPase/synthase is geared to the synthesis mode by conformational rearrangement of epsilon subunit in response to proton motive force and ADP/ATP balance

The epsilon subunit in F0F1-ATPase/synthase undergoes drastic conformational rearrangement, which involves the transition of two C-terminal helices between a hairpin "down"-state and an extended "up"-state, and the enzyme with the up-fixed epsilon cannot catalyze ATP hydrolysis but can catalyze ATP synthesis (Tsunoda, S. P., Rodgers, A. J. W., Aggeler, R., Wilce, M. C. J., Yoshida, M., and Capaldi, R. A. (2001) Proc. Natl. Acad. Sci. U. S. A. 98, 6560-6564). Here, using cross-linking between introduced cysteine residues as a probe, we have investigated the causes of the transition. Our findings are as follows. (i) In the up-state, the two helices of epsilon are fully extended to insert the C terminus into a deeper position in the central cavity of F1 than was thought previously. (ii) Without a nucleotide, epsilon is in the up-state. ATP induces the transition to the down-state, and ADP counteracts the action of ATP. (iii) Conversely, the enzyme with the down-state epsilon can bind an ATP analogue, 2',3'-O-(2,4,6-trinitrophenyl)-ATP, much faster than the enzyme with the up-state epsilon. (iv) Proton motive force stabilizes the up-state. Thus, responding to the increase of proton motive force and ADP, F0F1-ATPase/synthase would transform the epsilon subunit into the up-state conformation and change gear to the mode for ATP synthesis.

Aqueous access pathways in subunit a of rotary ATP synthase extend to both sides of the membrane

The role of subunit a in promoting proton translocation and rotary motion in the Escherichia coli F1Fo ATP synthase is poorly understood. In the membrane-bound Fo sector of the enzyme, H+ binding and release occur at Asp-61 in the middle of the second transmembrane helix (TMH) of subunit c. Protons are thought to reach Asp-61 at the center of the membrane via aqueous channels formed at least in part by one or more of the five TMHs of subunit a. Aqueous access pathways have previously been mapped to surfaces of aTMH4. Here we have substituted Cys into the second and fifth TMHs of subunit a and carried out chemical modification with Ag+ and N-ethylmaleimide to define the aqueous accessibility of residues along these helices. Access to cAsp-61 at the center of the membrane may be mediated in part by Ag+-sensitive residues 248, 249, 251, and 252 in aTMH5. From the periplasmic surface, aqueous access to cAsp-61 may be mediated by silver-sensitive residues 115, 116, 119, 120, 122, and 126 in aTMH2. The Ag+-sensitive residues in TMH2, -4, and -5 form a continuum extending from the periplasmic to the cytoplasmic side of the membrane. In an arrangement of helices supported by second-site revertant and crosslinking analyses, these residues cluster at the interior of a four-helix bundle formed by TMH2-5. The aqueous access pathways at the interior of subunit a may be gated by a swiveling of helices in this bundle, alternately exposing cytoplasmic and periplasmic half channels to cAsp-61 during the H+ transport cycle.

Integration of b subunits of unequal lengths into F1F0-ATP synthase

In Escherichia coli the peripheral stalk of F1F0-ATP synthase consists of a parallel dimer of identical b subunits. However, the length of the two b subunits need not be fixed. This led us to ask whether it is possible for two b subunits of unequal length to dimerize in a functional enzyme complex. A two-plasmid expression system has been developed that directs production of b subunits of unequal lengths in the same cell. Two b subunits differing in length have been expressed with either a histidine or V5 epitope tag to facilitate nickel-affinity resin purification (Ni-resin) and Western blot analysis. The epitope tags did not materially affect enzyme function. The system allowed us to determine whether the different b subunits segregate to form homodimers or, conversely, whether a heterodimer consisting of both the shortened and lengthened b subunits can occur in an intact enzyme complex. Experiments expressing different b subunits lengthened and shortened by up to 7 amino acids were detected in the same enzyme complex. The V5-tagged b subunit shortened by 7 amino acids (b Delta 7-V5) was detected in Ni-resin-purified membrane preparations only when coexpressed with a histidine-tagged b subunit in the same cell. The results demonstrate that the enzyme complex can tolerate a size difference between the two b subunits of up to 14 amino acids. Moreover, the experiments demonstrated the feasibility of constructing enzyme complexes with non-identical b subunits that will be valuable for research requiring specific chemical modification of a single b subunit.

ATP synthesis driven by proton transport in F1F0-ATP synthase

Topical questions in ATP synthase research are: (1) how do protons cause subunit rotation and how does rotation generate ATP synthesis from ADP+Pi? (2) How does hydrolysis of ATP generate subunit rotation and how does rotation bring about uphill transport of protons? The finding that ATP synthase is not just an enzyme but rather a unique nanomotor is attracting a diverse group of researchers keen to find answers. Here we review the most recent work on rapidly developing areas within the field and present proposals for enzymatic and mechanoenzymatic mechanisms.

The enigmatic mitochondrial ORF ymf39 codes for ATP synthase chain b

ymf39 is a conserved hypothetical protein-coding gene found in mitochondrial genomes of land plants and certain protists. We speculated earlier, based on a weak sequence similarity between Ymf39 from a green alga and the atpF gene product from Bradyrhizobium, that ymf39 might code for subunit b of mitochondrial F(0)F(1)-ATP synthase. To test this hypothesis, we have sequenced ymf39 from five protists with minimally derived mitochondrial genomes, the jakobids. In addition, we isolated the mitochondrial ATP synthase complex of the jakobid Seculamonas ecuadoriensis and determined the partial protein sequence of the 19-kDa subunit, the size expected for Ymf39. The obtained peptide sequence matches perfectly with a 3'-proximal region of the ymf39 gene of this organism, confirming that Ymf39 is indeed an ATP synthase subunit. Finally, we employed statistical tests to assess the significance of sequence similarity of Ymf39 proteins with each other, their nucleus-encoded functional counterparts, ATP4/ATP5F, from fungi and animals and alpha-proteobacterial ATP synthase b-subunits. This analysis provides clear evidence that ymf39 is an atpF homolog, while ATP4/ATP5F appears to be a highly diverged form of ymf39 that has migrated to the nucleus. We propose to designate ymf39 from now on atp4.

F1F0-ATP synthase. Binding of delta subunit to a 22-residue peptide mimicking the N-terminal region of alpha subunit

The stator in F(1)F(0)-ATP synthase resists strain generated by rotor torque. In Escherichia coli the b(2)delta subunit complex comprises the stator, bound to subunit a in F(0) and to alpha(3)beta(3) hexagon of F(1). Proteolysis and cross-linking had suggested that N-terminal residues of alpha subunit are involved in binding delta. Here we demonstrate that a synthetic peptide consisting of the first 22 residues of alpha ("alpha N1-22") binds specifically to isolated wild-type delta subunit with high affinity (K(d) = 130 nm), accounting for a major portion of the binding energy when delta-depleted F(1) and isolated delta bind together (K(d) = 1.4 nm). Stoichiometry of binding of alpha N1-22 to delta at saturation was 1/1, showing that in intact F(1)F(0)-ATP synthase only one of the three alpha subunits is involved in delta binding. When alpha N1-22 was incubated with delta subunits containing mutations in helices 1 or 5 on the F(1)-binding face of delta, peptide binding was impaired as was binding of delta-depleted F(1). Residues alpha 6-18 are predicted to be helical, and a potential helix capping box occurs at residues alpha 3-8. Circular dichroism measurements showed that alpha N1-22 had significant helical content. Hypothetically a helical region of residues alpha N1-22 packs with helices 1 and 5 on the F(1)-binding face of delta, forming the alpha/delta interface.

Identification of the F1-binding surface on the delta-subunit of ATP synthase

The stator function in ATP synthase was studied by a combined mutagenesis and fluorescence approach. Specifically, binding of delta-subunit to delta-depleted F(1) was studied. A plausible binding surface on delta-subunit was identified from conservation of amino acid sequence and the high resolution NMR structure. Specific mutations aimed at modulating binding were introduced onto this surface. Affinity of binding of wild-type and mutant delta-subunits to delta-depleted F(1) was determined quantitatively using the fluorescence signals of natural delta-Trp-28, inserted delta-Trp-11, or inserted delta-Trp-79. The results demonstrate that helices 1 and 5 in the N-terminal domain of the delta-subunit provide the F(1)-binding surface of delta. Unexpectedly, mutations that impaired binding between F(1) and delta were found to not necessarily impair ATP synthase activity. Further investigation revealed that inclusion of the soluble cytoplasmic domain of the b subunit substantially enhanced affinity of binding of delta-subunit to F(1). The new data show that the stator is "overengineered" to resist rotor torque during catalysis.

Structural model of the transmembrane Fo rotary sector of H+-transporting ATP synthase derived by solution NMR and intersubunit cross-linking in situ

H(+)-transporting, F(1)F(o)-type ATP synthases utilize a transmembrane H(+) potential to drive ATP formation by a rotary catalytic mechanism. ATP is formed in alternating beta subunits of the extramembranous F(1) sector of the enzyme, synthesis being driven by rotation of the gamma subunit in the center of the F(1) molecule between the alternating catalytic sites. The H(+) electrochemical potential is thought to drive gamma subunit rotation by first coupling H(+) transport to rotation of an oligomeric rotor of c subunits within the transmembrane F(o) sector. The gamma subunit is forced to turn with the c-oligomeric rotor due to connections between subunit c and the gamma and epsilon subunits of F(1). In this essay we will review recent studies on the Escherichia coli F(o) sector. The monomeric structure of subunit c, determined by NMR, shows that subunit c folds in a helical hairpin with the proton carrying Asp(61) centered in the second transmembrane helix (TMH). A model for the structural organization of the c(10) oligomer in F(o) was deduced from extensive cross-linking studies and by molecular modeling. The model indicates that the H(+)-carrying carboxyl of subunit c is occluded between neighboring subunits of the c(10) oligomer and that two c subunits pack in a "front-to-back" manner to form the H(+) (cation) binding site. In order for protons to gain access to Asp(61) during the protonation/deprotonation cycle, we propose that the outer, Asp(61)-bearing TMH-2s of the c-ring and TMHs from subunits composing the inlet and outlet channels must turn relative to each other, and that the swiveling motion associated with Asp(61) protonation/deprotonation drives the rotation of the c-ring. The NMR structures of wild-type subunit c differs according to the protonation state of Asp(61). The idea that the conformational state of subunit c changes during the catalytic cycle is supported by the cross-linking evidence in situ, and two recent NMR structures of functional mutant proteins in which critical residues have been switched between TMH-1 and TMH-2. The structural information is considered in the context of the possible mechanism of rotary movement of the c(10) oligomer during coupled synthesis of ATP.

ATP synthase from Saccharomyces cerevisiae: location of the OSCP subunit in the peripheral stalk region

A biotinylation signal has been fused to the C terminus of the oligomycin sensitivity conferral protein (OSCP) of the ATP synthase complex from Saccharomyces cerevisiae. The signal is biotinylated in vivo and the biotinylated complex binds avidin in vitro. By electron microscopy of negatively stained particles of the ATP synthase-avidin complex, the bound avidin has been localised close to the F(1) domain. The images were subjected to multi-reference alignment and classification. Because of the presence of a flexible linker between the OSCP and the biotinylation signal, the class-averages differ in the position of the avidin relative to the F(1) domain. These positions lie on an arc, and its centre indicates the position of the C terminus of the OSCP on the surface of the F(1) domain. Since the N-terminal region of the OSCP is known to interact with the N-terminal regions of alpha-subunits, which are on top of the F(1) domain distal from the F(o) membrane domain, the OSCP extends almost 10nm along the surface of F(1) down towards F(o) where it interacts with the C terminus of the b subunit, which extends up from F(o). The labelling technique has also allowed a reliable 2D projection map to be developed for the intact ATP synthase from S.cerevisiae. The map reveals a marked asymmetry in the F(o) part of the complex that can be attributed to subunits in the F(o) domain.

Quantitative determination of binding affinity of delta-subunit in Escherichia coli F1-ATPase: effects of mutation, Mg2+, and pH on Kd

To study the stator function in ATP synthase, a fluorimetric assay has been devised for quantitative determination of binding affinity of delta-subunit to Escherichia coli F(1)-ATPase. The signal used is that of the natural tryptophan at residue delta28, which is enhanced by 50% upon binding of delta-subunit to alpha(3)beta(3)gammaepsilon complex. K(d) for delta binding is 1.4 nm, which is energetically equivalent (50.2 kJ/mol) to that required to resist the rotor strain. Only one site for delta binding was detected. The deltaW28L mutation increased K(d) to 4.6 nm, equivalent to a loss of 2.9 kJ/mol binding energy. While this was insufficient to cause detectable functional impairment, it did facilitate preparation of delta-depleted F(1). The alphaG29D mutation reduced K(d) to 26 nm, equivalent to a loss of 7.2 kJ/mol binding energy. This mutation did cause serious functional impairment, referable to interruption of binding of delta to F(1). Results with the two mutants illuminate how finely balanced is the stator resistance function. delta' fragment, consisting of residues delta1-134, bound with the same K(d) as intact delta, showing that, at least in absence of F(o) subunits, the C-terminal domain of delta contributes zero binding energy. Mg(2+) ions had a strong effect on increasing delta binding affinity, supporting the possibility of bridging metal ion involvement in stator function. High pH environment greatly reduced delta binding affinity, suggesting the involvement of protonatable side-chains in the binding site.

Folding and stability of the b subunit of the F(1)F(0) ATP synthase

The F(1)F(0) ATP synthase is a reversible molecular motor that employs a rotary catalytic cycle to couple a chemiosmotic membrane potential to the formation/hydrolysis of ATP. The multisubunit enzyme contains two copies of the b subunit that form a homodimer as part of a narrow, peripheral stalk structure that connects the membrane (F(0)) and soluble (F(1)) sectors. The three-dimensional structure of the b subunit is unknown making the nature of any interactions or conformational changes within the F(1)F(0) complex difficult to interpret. We have used circular dichroism and analytical ultracentrifugation analyses of a series of N- and C-terminal truncated b proteins to investigate its stability and structure. Thermal denaturation of the b constructs exhibited distinct two-state, cooperative unfolding with T(m) values between 30 and 40 degrees C. CD spectra for the region comprising residues 53-122 (b(53-122)) showed theta;(222)/theta;(208) = 0.99, which reduced to 0.92 in the presence of the hydrophobic solvent trifluoroethanol. Thermodynamic parameters for b(53-122) (DeltaG, DeltaH and DeltaC(p)) were similar to those reported for several nonideal, coiled-coil proteins. Together these results are most consistent with a noncanonical and unstable parallel coiled-coil at the interface of the b dimer.

Reconstitution of Fo of the sodium ion translocating ATP synthase of Propionigenium modestum from its heterologously expressed and purified subunits

The atpB and atpF genes of Propionigenium modestum were cloned as His-tag fusion constructs and expressed in Escherichia coli. Both recombinant subunits a and b were purified via Ni(2+) chelate affinity chromatography. A functionally active Fo complex was reassembled in vitro from subunits a, b and c, and incorporated into liposomes. The F(o) liposomes catalysed (22)Na(+) uptake in response to an inside negative potassium diffusion potential, and the uptake was prevented by modification of the c subunits with N,N'-dicyclohexylcarbodiimide (DCCD). In the absence of a membrane potential the Fo complexes catalysed (22)Na(+)(out)/Na(+)(in)-exchange. After F(1) addition the F(1)F(o) complex was formed and the holoenzyme catalysed ATP synthesis, ATP dependent Na(+) pumping, and ATP hydrolysis, which was inhibited by DCCD. Functional F(o) hybrids were reconstituted with recombinant subunits a and b from P. modestum and c(11) from Ilyobacter tartaricus. These Fo hybrids had Na(+) translocation activities that were not distinguishable from that of P. modestum F(o).

A point mutation in the ATP synthase of Rhodobacter capsulatus results in differential contributions of Delta(pH) and Delta(phi) in driving the ATP synthesis reaction

The interface between the c-subunit oligomer and the a subunit in the F0 sector of the ATP synthase is believed to form the core of the rotating motor powered by the protonic flow. Besides the essential cAsp61 and aArg210 residues (Escherichia coli numbering), a few other residues at this interface, although nonessential, show a high degree of conservation, among these aGlu219. The homologous residue aGlu210 in the ATP synthase of the photosynthetic bacterium Rhodobacter capsulatus has been substituted by a lysine. Inner membranes prepared from the mutant strain showed approximately half of the ATP synthesis activity when driven both by light and by acid-base transitions. As estimated with the ACMA assay, proton pumping rates in the inner membranes were also reduced to a similar extent in the mutant. The most striking impairment of ATP synthesis in the mutant, a decrease as low as 12 times as compared to the wild-type, was observed in the absence of a transmembrane electrical membrane potential (Delta(phi)) at low transmembrane pH difference (Delta(pH)). Therefore, the mutation seems to affect both the mechanism responsible for coupling F1 with proton translocation by F0, and the mechanism determining the relative contribution of Delta(pH) and Delta(phi) in driving ATP synthesis.

The molecular mechanism of ATP synthesis by F1F0-ATP synthase

ATP synthesis by oxidative phosphorylation and photophosphorylation, catalyzed by F1F0-ATP synthase, is the fundamental means of cell energy production. Earlier mutagenesis studies had gone some way to describing the mechanism. More recently, several X-ray structures at atomic resolution have pictured the catalytic sites, and real-time video recordings of subunit rotation have left no doubt of the nature of energy coupling between the transmembrane proton gradient and the catalytic sites in this extraordinary molecular motor. Nonetheless, the molecular events that are required to accomplish the chemical synthesis of ATP remain undefined. In this review we summarize current state of knowledge and present a hypothesis for the molecular mechanism of ATP synthesis.

Coupling of proton flow to ATP synthesis in Rhodobacter capsulatus: F(0)F(1)-ATP synthase is absent from about half of chromatophores

F(0)F(1)-ATP synthase (H(+)-ATP synthase, F(0)F(1)) utilizes the transmembrane protonmotive force to catalyze the formation of ATP from ADP and inorganic phosphate (P(i)). Structurally the enzyme consists of a membrane-embedded proton-translocating F(0) portion and a protruding hydrophilic F(1) part that catalyzes the synthesis of ATP. In photosynthetic purple bacteria a single turnover of the photosynthetic reaction centers (driven by a short saturating flash of light) generates protonmotive force that is sufficiently large to drive ATP synthesis. Using isolated chromatophore vesicles of Rhodobacter capsulatus, we monitored the flash induced ATP synthesis (by chemoluminescence of luciferin/luciferase) in parallel to the transmembrane charge transfer through F(0)F(1) (by following the decay of electrochromic bandshifts of intrinsic carotenoids). With the help of specific inhibitors of F(1) (efrapeptin) and of F(0) (venturicidin), we decomposed the kinetics of the total proton flow through F(0)F(1) into (i) those coupled to the ATP synthesis and (ii) the de-coupled proton escape through F(0). Taking the coupled proton flow, we calculated the H(+)/ATP ratio; it was found to be 3.3+/-0.6 at a large driving force (after one saturating flash of light) but to increase up to 5.1+/-0.9 at a smaller driving force (after a half-saturating flash). From the results obtained, we conclude that our routine chromatophore preparations contained three subsets of chromatophore vesicles. Chromatophores with coupled F(0)F(1) dominated in fresh material. Freezing/thawing or pre-illumination in the absence of ADP and P(i) led to an increase in the fraction of chromatophores with at least one de-coupled F(0)(F(1)). The disclosed fraction of chromatophores that lacked proton-conducting F(0)(F(1)) (approx. 40% of the total amount) remained constant upon these treatments.

Inter-subunit rotation and elastic power transmission in F0F1-ATPase

ATP synthase (F-ATPase) produces ATP at the expense of ion-motive force or vice versa. It is composed from two motor/generators, the ATPase (F1) and the ion translocator (F0), which both are rotary steppers. They are mechanically coupled by 360 degrees rotary motion of subunits against each other. The rotor, subunits gamma(epsilon)C10-14, moves against the stator, (alphabeta)3delta(ab2). The enzyme copes with symmetry mismatch (C3 versus C10-14) between its two motors, and it operates robustly in chimeric constructs or with drastically modified subunits. We scrutinized whether an elastic power transmission accounts for these properties. We used the curvature of fluorescent actin filaments, attached to the rotating c ring, as a spring balance (flexural rigidity of 8.10(-26) N x m2) to gauge the angular profile of the output torque at F0 during ATP hydrolysis by F1. The large average output torque (56 pN nm) proved the absence of any slip. Angular variations of the torque were small, so that the output free energy of the loaded enzyme decayed almost linearly over the angular reaction coordinate. Considering the three-fold stepping and high activation barrier (>40 kJ/mol) of the driving motor (F1) itself, the rather constant output torque seen by F0 implied a soft elastic power transmission between F1 and F0. It is considered as essential, not only for the robust operation of this ubiquitous enzyme under symmetry mismatch, but also for a high turnover rate under load of the two counteracting and stepping motors/generators.

Structure of Ala(20) --> Pro/Pro(64) --> Ala substituted subunit c of Escherichia coli ATP synthase in which the essential proline is switched between transmembrane helices

The structure of the A20P/P64A mutated subunit c of Escherichia coli ATP synthase, in which the essential proline has been switched from residue 64 of the second transmembrane helix (TMH) to residue 20 of the first TMH, has been solved by (15)N,(1)H NMR in a monophasic chloroform/methanol/water (4:4:1) solvent mixture. The cA20P/P64A mutant grows as well as wild type, and the F(0)F(1) complex is fully functional in ATPase-coupled H(+) pumping. Residues 20 and 64 lie directly opposite to each other in the hairpin-like structure of wild type subunit c, and the prolinyl 64 residue is thought to induce a slight bend in TMH-2 such that it wraps around a more straightened TMH-1. In solution, the A20P/P64A substituted subunit c also forms a hairpin of two alpha-helices, with residues 41-45 forming a connecting loop as in the case of the wild type protein, but, in this case, Pro(20) induces a bend in TMH-1, which then packs against a more straightened TMH-2. The essential prolinyl residue, whether at position 64 or 20, lies close to the aspartyl 61 H(+) binding site. The prolinyl residue may introduce structural flexibility in this region of the protein, which may be necessary for the proposed movement of the alpha-helical segments during the course of the H(+) pumping catalytic cycle.

Second stalk of ATP synthase. Cross-linking of gamma subunit in F1 to truncated Fob subunit prevents ATP hydrolysis

ATP synthase consists of two portions, F(1) and F(o), connected by two stalks: a central rotor stalk containing gamma and epsilon subunits and a peripheral, second stalk formed by delta and two copies of F(o)b subunits. The second stalk is expected to keep the stator subunits from spinning along with the rotor. We isolated a TF(1)-b'(2) complex (alpha(3)beta(3)gammadeltaepsilonb'(2)) of a thermophilic Bacillus PS3, in which b' was a truncated cytoplasmic fragment of F(o)b subunit, and introduced a cysteine at its N terminus (bc'). Association of b'(2) or bc'(2) with TF(1) did not have significant effect on ATPase activity. A disulfide bond between the introduced cysteine of bc' and cysteine 109 of gamma subunit was readily formed, and this cross-link caused inactivation of ATPase. This implies that F(o)b subunit bound to stator subunits of F(1) with enough strength to resist rotation of gamma subunit and to prevent catalysis. Contrary to this apparent tight binding, some detergents such as lauryldodecylamine oxide tend to cause release of b'(2) from TF(1).

Mutational analysis of subunit G (Vma10p) of the yeast vacuolar H+-ATPase

The G subunit of V-ATPases is a soluble subunit that shows homology with the b subunit of F-ATPases and may be part of the "stator" stalk connecting the peripheral V(1) and membrane V(0) sectors. When the N-terminal half of the G subunit is modeled as an alpha helix, most of the conserved residues fall on one face of the helix (Hunt, I. E., and Bowman, B. J. (1997) J. Bioenerg. Biomembr. 29, 533-540). We probed the function of this region by site-directed mutagenesis of the yeast VMA10 gene. Stable G subunits were produced in the presence of Y46A and K55A mutations, but subunit E was destabilized, resulting in loss of the V-ATPase assembly. Mutations E14A and K50A allowed wild-type growth and assembly of V-ATPase complexes, but the complexes formed were unstable. Mutations R25A and R25L stabilized V-ATPase complexes relative to wild-type and partially inhibited disassembly of V(1) from V(0) in response to glucose deprivation even though the mutant enzymes were fully active. A 2-amino acid deletion in the middle of the predicted N-terminal helix (DeltaQ29D30) allowed assembly of a functional V-ATPase. The results indicate that, although the N-terminal half of the G subunit is essential for V-ATPase activity, either this region is not a rigid helix or the presence of a continuous, conserved face of the helix is not essential.

A re-examination of the structural and functional consequences of mutation of alanine-128 of the b subunit of Escherichia coli ATP synthase to aspartic acid

The effects of mutation of residue Ala-128 of the b subunit of Escherichia coli ATP synthase to aspartate on the structure of the subunit and its interaction with the F(1) sector were analyzed. Determination of solution molecular weights by sedimentation equilibrium ultracentrifugation revealed that the A128D mutation had little effect on dimerization in the soluble b construct, b(34-156). However, the mutation caused a structural perturbation detected through both a 12% reduction in the sedimentation coefficient and also a reduced tendency to form intersubunit disulfide bonds between cysteine residues inserted at position 132. Unlike the wild-type sequence, the A128D mutant was unable to interact with F(1)-ATPase. These results indicate that the A128D mutation caused a structural change in the C-terminal region of the protein, preventing the binding to F(1) but having little or no effect on the dimeric nature of b.

Subunit organization of the stator part of the F0 complex from Escherichia coli ATP synthase

Membrane-bound ATP synthases (F1F0) catalyze the synthesis of ATP via a rotary catalytic mechanism utilizing the energy of an electrochemical ion gradient. The transmembrane potential is supposed to propel rotation of a subunit c ring of F0 together with subunits gamma and epsilon of F1, thereby forming the rotor part of the enzyme, whereas the remainder of the F1F0 complex functions as a stator for compensation of the torque generated during rotation. This review focuses on our recent work on the stator part of the F0 complex, e.g., subunits a and b. Using epitope insertion and antibody binding, subunit a was shown to comprise six transmembrane helixes with both the N- and C-terminus oriented toward the cytoplasm. By use of circular dichroism (CD) spectroscopy, the secondary structure of subunit b incorporated into proteoliposomes was determined to be 80% alpha-helical together with 14% beta turn conformation, providing flexibility to the second stalk. Reconstituted subunit b together with isolated ac subcomplex was shown to be active in proton translocation and functional F1 binding revealing the native conformation of the polypeptide chain. Chemical crosslinking in everted membrane vesicles led to the formation of subunit b homodimers around residues bQ37 to bL65, whereas bA32C could be crosslinked to subunit a, indicating a close proximity of subunits a and b near the membrane. Further evidence for the proposed direct interaction between subunits a and b was obtained by purification of a stable ab2 subcomplex via affinity chromatography using His tags fused to subunit a or b. This ab2 subcomplex was shown to be active in proton translocation and F1 binding, when coreconstituted with subunit c. Consequences of crosslink formation and subunit interaction within the F1F0 complex are discussed.

Insights into ATP synthase structure and function using affinity and site-specific spin labeling

A variety of different approaches has been used during the last couple of decades to investigate structure and function relationships within the catalytic portion of the F0F1-ATP synthase and of its interactions with the proton-translocator F0. In our group, we employ ESR spectroscopy with the use of stable organic radicals, so-called spin labels, as reporter groups. The radicals are either attached to substrates/ligands or specifically inserted into the protein structure by "site-specific spin labeling." Both approaches bear intrinsic advantages for their special uses and result in the specific information that is available through ESR, e.g., structural changes due to binding of effector molecules (e.g., Mg2+ ions), conformational transitions during catalytic turnover, distance information on radicals bound at 20 A or less, and information on the binding characteristics of labeled substrates. This review summarizes the results of a variety of different approaches we have used during the last years to study, with the help of ESR spectroscopy, the structure of the nucleotide binding sites of F1-ATPases of different origins as well as interactions with F0 subunits.

F1F0-ATP synthase-stalking mind and imagination

Electron microscopy together with image analysis has been used to study the structure of the intact F1F0-ATPsynthase from Escherichia coli. A procedure has been developed which allows preparation of detergent-free enzyme. Aside from the well known two-domain structure, images of F1F0 prepared by this procedure show a number of additional features, including a second stalk, which can be seen extending all the way from the F0 to the top of the F1 in some images, and a small protein on the very top of the F1, which has been identified as the delta subunit by decoration with a monoclonal antibody. In light of these results, a refined model of the subunit arrangement of the complex is presented.

The b subunit of Escherichia coli ATP synthase

The b subunit of ATP synthase is a major component of the second stalk connecting the F1 and F0 sectors of the enzyme and is essential for normal assembly and function. The 156-residue b subunit of the Escherichia coli ATP synthase has been investigated extensively through mutagenesis, deletion analysis, and biophysical characterization. The two copies of b exist as a highly extended, helical dimer extending from the membrane to near the top of F1, where they interact with the delta subunit. The sequence has been divided into four domains: the N-terminal membrane-spanning domain, the tether domain, the dimerization domain, and the C-terminal delta-binding domain. The dimerization domain, contained within residues 60-122, has many properties of a coiled-coil, while the delta-binding domain is more globular. Sites of crosslinking between b and the a, alpha, beta, and delta subunits of ATP synthase have been identified, and the functional significance of these interactions is under investigation. The b dimer may serve as an elastic element during rotational catalysis in the enzyme, but also directly influences the catalytic sites, suggesting a more active role in coupling.