Protein adsorption studies on model organic surfaces: an ellipsometric and infrared spectroscopic approach

Surface modification of a perfluorinated ionomer using a glow discharge deposition method to control protein adsorption

Nafion is the membrane material preferred for in situ glucose sensors. Unfortunately, surface properties of Nafion promote random protein adsorption and eventual foreign body encapsulation thus leading to loss of glucose signal over time. Here we detail surface modifications made by RF plasma deposition to Nafion with the intent to prevent random protein adsorption while providing enough functional sites (hydroxyl groups) to bind a biologically active peptide known to induce cellular adhesion (YRGDS). Nafion surfaces were modified by RF plasma polymerizing five different combinations of (1) tetraethylene glycol dimethyl ether (tetraglyme) and (2) 2-hydroxyethyl methacrylate (HEMA): pure tetraglyme, 2.5% HEMA with 97.5% tetraglyme, 5% HEMA with 95% tetraglyme, 10% HEMA with 90% tetraglyme, and pure HEMA. Resultant surfaces were characterized by XPS (low and high resolution), dynamic contact angle, and atomic force microscopy. Protein adsorption and retention was determined and correlated to surface layer composition. The ability to bind a cell adhesion peptide was also determined and correlated well with surface layer composition.

Modern biomaterials: a review - bulk properties and implications of surface modifications

This review concerns the importance of length and time on physicochemical interactions between living tissue and biomaterials that occur on implantation. The review provides information on material host interactions, materials for medical applications and cell surface interactions, and then details the extent of knowledge concerning the role(s) that surface chemistry and topography play during the first stage of implant integration, namely protein adsorption. The key points are illustrated by data from model in vitro studies. Host implant interactions begin nanoseconds after first contact and from then on are in a state of flux due to protein adsorption, cell adhesion and physical and chemical alteration of the implanted material. The many questions concerning the conformational form and control of bound proteins and how this may impact on cell adhesion in the first instance and later on cell signalling and implant integration can be answered by systematic investigations using model materials. Only then we will be in a more informed position to design new materials for use in the body.

Chemiluminescence-based detection and comparison of protein amounts adsorbed on differently modified silica surfaces

The biological consequences of protein adsorption on biomaterial surfaces are considered to be of utmost importance for their biocompatibility. A new method based on amino group-labeling coupled to a chemiluminescence reaction for direct determination of proteins adsorbed on material surfaces was employed. This method was used to explore the effects of surface chemistry and surface roughness on protein adsorption in a silicon oxide model system. Corundum sandblasting was applied to silicon wafers to create roughened surfaces while immobilization of fluorocarbon-, hydrocarbon-, and poly(ethylene glycol)-containing silanes produced surfaces of varying wettability. The adsorption behavior of two complex body fluids, human serum and saliva, and of two purified components, human serum albumin and fibronectin, was strongly influenced by the surface parameters. A general tendency to higher amounts of adsorbed protein was found on roughened surfaces and modification with poly(ethylene glycol) or with fluorocarbon moieties reduced protein adsorption. The values obtained with the new method could be confirmed by a colorimetric determination of protein amounts adsorbed on identically modified silica beads and were in accordance with those previously reported utilizing established methods for protein quantification. The presented method, which was methodically simple to perform and allowed the simultaneous measurement of a large number of samples, may be of future value for high-throughput surveying of the protein adsorption characteristics of biomaterials.

Immunosensor interface based on physical and chemical immunoglobulin G adsorption onto mixed self-assembled monolayers

An immunosensor interface based on mixed hydrophobic self-assembled monolayers (SAMs) of methyl and carboxylic acid terminated thiols with covalently attached human Immunoglobulin G (hIgG), is investigated. The densely packed and organised SAMs were characterised by contact angle measurements and cyclic voltammetry. The effect of the non-ionic surfactant, Tween 20, in preventing nonspecific adsorption is addressed by ellipsometry during physical and covalent hIgG immobilization on pure and mixed SAMs, respectively. It is clearly demonstrated that nonspecific adsorption due to hydrophobic interactions of hIgG on methyl ended groups is totally inhibited, whereas electrostatic/hydrogen bonding interactions with the exposed carboxylic groups prevail in the presence of surfactant. Results of ellipsometry and Atomic Force Microscopy, reveal that the surface concentration of covalently immobilized hIgG is determined by the ratio of COOH / CH(3)-terminated thiols in SAM forming solution. Moreover, the ellipsometric data demonstrates that the ratio of bound anti-hIgG / hIgG depends on the density of hIgG on the surface and that the highest ratio is close to three. We also report the selectivity and high sensitivity achieved by chronoamperometry in the detection of adsorbed hIgG and the reaction with its antibody.

Adsorption behavior and activity of hexokinase

The study on the adsorption of hexokinase (HK) onto silicon wafers was carried out by means of in situ ellipsometry and atomic force microscopy in the liquid. The thickness values of the adsorbed HK layer determined by both techniques were in excellent agreement and evidenced HK monolayer formation. The adsorption of HK onto Si wafers was favored at low ionic strength, indicating that the adsorption is mainly driven by electrostatic forces, since salt screens not only the segment-segment repulsion but also the segment-surface attraction when the salt concentration increases. The enzymatic activity of free HK and of adsorbed HK was measured as a function of time. Free HK in solution lost activity upon storage. Contrarily, adsorbed HK kept its activity level even after 48 h storage at room temperature. This outstanding behavior was attributed to specific orientation of the HK active site to the solution.

Voltammetry and in situ scanning tunnelling microscopy of de novo designed heme protein monolayers on Au(111)-electrode surfaces

In the present work, we report the electrochemical characterization and in situ scanning tunnelling microscopy (STM) studies of monolayers of an artificial de novo designed heme protein MOP-C, covalently immobilized on modified Au(111) surfaces. The protein forms closely packed monolayers, which remain electroactive upon immobilization. In situ STM images show circular structures indicating that MOP-C stands upright on the surface in accordance with the molecular design. Despite the large spatial extension of MOP-C, about 5 nm in height, conditions could be found where tip/sample interaction is minimal and proteins could be imaged without detectable tip interference. The results indicate further that the structural sensitivity of (in situ) STM depends to a significant extent on associated electron transfer kinetics. In the present case, the heme group does not contribute significantly to the tunnelling current, apparently due to slow electron transfer kinetics. As a consequence, STM images of heme-containing and heme-free MOP-C did not reveal any notable differences in apparent height or physical extension. The apparent height of heme-containing MOP-C did not show any dependence on the substrate potential being varied around the redox potential of the protein. The mere presence of an accessible molecular energy level is not sufficient to result in detectable tunnelling current modulation.

Building of an immunosensor: How can the composition and structure of the thiol attachment layer affect the immunosensor efficiency?

Immunosensors, based on the immobilization of a model rabbit antibody on mixed self-assembled monolayers and Protein A as a linking agent on gold transducers, were elaborated and characterized at each step by modulated polarization-infrared spectroscopy (PM-IRRAS) and occasionally by atomic force microscopy (AFM) and quartz crystal microbalance (QCM). By testing two different mixed SAMs comprising 11-mercaptoundecanoic acid (MUA), together with either decanethiol (C9CH3) or mercaptohexanol (C6OH), the role of the chemical composition and structure of the antibody attachment layer upon the sensor performance was demonstrated.

Molecular basis of cell-biomaterial interaction: insights gained from transcriptomic and proteomic studies

With the growing interest in clinical interventions that involve medical devices, the role for new biomaterials in modern medicine is currently expanding at a phenomenal rate. Failure of most implant materials stems from an inability to predict and control biological phenomena, such as protein adsorption and cell interaction, resulting in an inappropriate host response to the materials. Contemporary advances in biological investigation are starting to shift focus in the biomaterials field, in particular with the advent of high-throughput methodologies for gene and protein expression profiling. Here, we examine the role that emerging transcriptomic and proteomic technologies could play in relation to biomaterial development and usage. Moreover, a number of studies are highlighted which have utilized such approaches in order to try to create a deeper understanding of cell-biomaterial interactions and, hence, improve our ability to predict and control the biocompatibility of new materials.

Mineralization capacity of Runx2/Cbfa1-genetically engineered fibroblasts is scaffold dependent

Development of tissue-engineered constructs for skeletal regeneration of large critical-sized defects requires the identification of a sustained mineralizing cell source and careful optimization of scaffold architecture and surface properties. We have recently reported that Runx2-genetically engineered primary dermal fibroblasts express a mineralizing phenotype in monolayer culture, highlighting their potential as an autologous osteoblastic cell source which can be easily obtained in large quantities. The objective of the present study was to evaluate the osteogenic potential of Runx2-expressing fibroblasts when cultured in vitro on three commercially available scaffolds with divergent properties: fused deposition-modeled polycaprolactone (PCL), gas-foamed polylactide-co-glycolide (PLGA), and fibrous collagen disks. We demonstrate that the mineralization capacity of Runx2-engineered fibroblasts is scaffold dependent, with collagen foams exhibiting ten-fold higher mineral volume compared to PCL and PLGA matrices. Constructs were differentially colonized by genetically modified fibroblasts, but scaffold-directed changes in DNA content did not correlate with trends in mineral deposition. Sustained expression of Runx2 upregulated osteoblastic gene expression relative to unmodified control cells, and the magnitude of this expression was modulated by scaffold properties. Histological analyses revealed that matrix mineralization co-localized with cellular distribution, which was confined to the periphery of fibrous collagen and PLGA sponges and around the circumference of PCL microfilaments. Finally, FTIR spectroscopy verified that mineral deposits within all Runx2-engineered scaffolds displayed the chemical signature characteristic of carbonate-containing, poorly crystalline hydroxyapatite. These results highlight the important effect of scaffold properties on the capacity of Runx2-expressing primary dermal fibroblasts to differentiate into a mineralizing osteoblastic phenotype for bone tissue engineering applications.

Optimal design of microarray immunoassays to compensate for kinetic limitations: theory and experiment

In this report we examine the limitations of existing microarray immunoassays and investigate how best to optimize them using theoretical and experimental approaches. Derived from DNA technology, microarray immunoassays present a major technological challenge with much greater physicochemical complexity. A key physicochemical limitation of the current generation of microarray immunoassays is a strong dependence of antibody microspot kinetics on the mass flux to the spot as was reported by us previously. In this report we analyze, theoretically and experimentally, the effects of microarray design parameters (incubation vessel geometry, incubation time, stirring, spot size, antibody-binding site density, etc.) on microspot reaction kinetics and sensitivity. Using a two-compartment model, the quantitative descriptors of the microspot reaction were determined for different incubation and microarray design conditions. This analysis revealed profound mass transport limitations in the observed kinetics, which may be slowed down as much as hundreds of times compared with the solution kinetics. The data obtained were considered with relevance to microspot assay diffusional and adsorptive processes, enabling us to validate some of the underlying principles of the antibody microspot reaction mechanism and provide guidelines for optimal microspot immunoassay design. For an assay optimized to maximize the reaction velocity on a spot, we demonstrate sensitivities in the am and low fm ranges for a system containing a representative sample of antigen-antibody pairs. In addition, a separate panel of low abundance cytokines in blood plasma was detected with remarkably high signal-to-noise ratios.

Study of adsorption and viscoelastic properties of proteins with a quartz crystal microbalance by measuring the oscillation amplitude

The adsorption kinetics of protein A, BSA, IgG, and fibronectin has been investigated using a homemade quartz crystal microbalance. Information about the energy losses appearing in the system is measured by the maximal oscillation amplitude and the dissipation factor. Only the maximal oscillation amplitude allows us to distinguish the different contributions of liquid and mass to the total frequency shift. The adsorption of proteins has been performed on Ti and Au surfaces at different concentrations. The amount of irreversible adsorbed protein A and IgG increases with increasing bulk concentrations. On Au more proteins adsorb, but their biological activity is reduced in comparison to Ti. Protein A forms a first monolayer in a few seconds, which shows practically no energy losses, and following this a second monolayer is formed. The adsorption rate for the second monolayer is much smaller and energy losses are present. Fibronectin is forming a very viscoelastic system, whose mechanical properties are affected by immersion in different buffer solutions.

Kinetics of antigen binding to antibody microspots: strong limitation by mass transport to the surface

It is well documented that diffusion has generally a strong effect on the binding kinetics in the microtiter plate immunoassays. However, a systematic quantitative experimental evaluation of the microspot kinetics is still missing in the literature. Our work aims at filling this important gap of knowledge on the example of antigen binding to antibody microspots. A mathematical model was derived within the framework of two-compartment model and applied to the quantitative analysis of the experimental data obtained for typical antibody microspot assays. A strong mass-transport dependence of the antigen-antibody microspot kinetics was identified to be one of the main restrictions of this new technology. The binding reactions are slowed down in the microspot immunoassays by several orders of magnitude as compared with the corresponding well-stirred bulk reactions. The task to relax the mass-transport limitations should thus be one of the most important issues in designing the antibody microarrays. These limitations notwithstanding, the detection range of more than five orders of magnitude and the high sensitivity in the low femtomolar range were experimentally achieved in our study, demonstrating thus an enormous potential of this highly capable technology.

Controlled Nanozeolite-Assembled Electrode: Remarkable Enzyme-Immobilization Ability and High Sensitivity as Biosensor

An enzyme-immobilized nanozeolite-assembled electrode was prepared by controlled assembly of nanometer-sized Linder type-L zeolite (nano-LTL-zeolite) on an indium tin oxide (ITO) glass electrode surface, and subsequent immobilization of cytochrome c. Cyclic voltammetric (CV) and amperometric experiments showed that, relative to other reported electrodes, the enzyme-immobilized electrodes possess fast electron-transfer rates (2.2 s(-1)), a broad linear range (15-540 micromol L(-1)), a low detection limit (3.2 nmol L(-1)), a remarkably long lifetime (5 months), and high stability in the pH range 5-10. These characteristics could be due to the fact that nanozeolites assembled on ITO have high immobilization ability and facilitate interaction with enzymes. The function controllability of these enzyme electrodes, resulting from the facile manipulability of nanozeolite-assembled layers, may provide a possibility to rationally design biosensors.

Evanescent-imaging-ellipsometry-based microarray reader

We describe the development of a label-less ellipsometric imaging microarray reader. The ability of the ellipsometric microarray reader to measure binding of sample to microarray surface is verified using oligonucleotide complementary DNA (cDNA) microarrays. Polarized light illuminates the microarray surface through a glass substrate at an angle beyond the critical angle and changes in the polarization of totally internally reflected light resulting from binding events on the microarray surface are measured. This polarization change is used to measure the thickness of biomolecules bound to the microarray. A prototype ellipsometric imaging microarray reader is constructed and calibrated, and the performance is evaluated with cDNA microarrays. The microarray reader measures changes in refractive index changes as small as 0.0024 and thickness changes as small as 0.28 nm. The optimization of angle of incidence and substrate refractive index necessary to achieve high sensitivity is also described. This ellipsometric technique offers an attractive alternative to fluorescence-microarray readers in some genomic, proteomic, diagnostic, and sensing applications.

Monitoring of the self-assembled monolayer of 1-hexadecanethiol on a gold surface at nanomolar concentration using a piezo-excited millimeter-sized cantilever sensor

In this paper, we describe a new method of measuring alkanethiol monolayer formation on a gold surface. A gold-coated millimeter-sized rectangular-shaped lead zirconate titanate (PZT) cantilever of dimensions 3.5 x 2 x 0.05 mm, previously shown to detect a picogram level of mass change, was used to measure the adsorption kinetics of 1-hexadecanethiol in ethanol over six orders of concentration range (1 nM to 10 mM) in real time. The flexural mode of cantilever vibration, 45.5 +/- 0.01 kHz, was monitored during the self-assembly. The total resonant frequency change obtained for the 1 nM, 10 nM, 100 nM, 1 microM, 4 mM, 8 mM, and 10 mM thiol concentrations were 116 +/- 2 (n = 2), 225 (n = 1), 270 +/- 10 (n = 2), 440 +/- 10 (n = 2), 900 +/- 10 (n = 2), 900 +/- 10 (n = 2), and 900 +/- 10 (n = 2) Hz, respectively. These results compare favorably to literature results in that the rate of the monolayer formation is concentration-dependent and the exponential change during adsorption follows the reversible first-order Langmuir kinetic model. The rate constants of adsorption and desorption were 0.061 M(-1) s(-1) and 3.61 x 10(-4) s(-1), respectively. The significance of the results is that millimeter-sized PZT cantilevers can be used in real-time for characterizing self-assembly of monolayer formation at nanomolar concentration levels. In addition, at 1 nM, the adsorption was found not to be diffusion limited.

Part III: Surface-enhanced Raman scattering of amino acids and their homodipeptide monolayers deposited onto colloidal gold surface

Surface-enhanced Raman scattering (SERS) spectra were measured for monolayers of various amino acids: L-methionine (Met), L-cysteine (Cys), L-glycine (Gly), L-leucine (Leu), L-phenylalanine (Phe), and L-proline (Pro) and their homodipeptides (Met-Met, Cys-Cys, Gly-Gly, Leu-Leu, Phe-Phe, and Pro-Pro) deposited onto a colloidal gold surface. Orientation of amino acids and their homodipeptides, as well as specific-competitive interactions of their functional groups with the gold surface, were predicted by detailed spectral analysis of the obtained SERS spectra. The analysis performed allowed us to propose a particular surface geometry for each amino acid and homodipeptide on the gold surface. In addition, we compared the structures of these molecules adsorbed on colloidal gold and silver surfaces.

In vitro hemocompatibility of self-assembled monolayers displaying various functional groups

Self-assembled monolayers (SAMs) of alkanethiols with various terminating groups (-OH, -CH3, -COOH) and binary mixtures of these alkanethiols were studied with respect to their hemocompatibility in vitro by means of freshly taken human whole blood. The set of smooth monomolecular films with graded surface characteristics was applied to scrutinize hypotheses on the impact of surface chemical-physical properties on distinct blood activation cascades, i.e. to analyze -OH surface groups vs. complement activation, acidic surface sites vs. contact activation/coagulation and surface hydrophobicity vs. thrombogenicity. Blood and model surfaces were analyzed after incubation for the related hemocompatibility parameters. Our results show that the adhesion of leukocytes is abolished on a -CH3 surface and greatly enhanced on surfaces with -OH groups. The opposite was detected for the adhesion of platelets. A strong correlation between the activation of the complement system and the adhesion of leukocytes with the content of -OH groups could be observed. The contact activation for hydrophilic surfaces was found to scale with the amount of acidic surface sites. However, the coagulation and platelet activation did not simply correlate with any surface property and were therefore concluded to be determined by a superposition of contact activation and platelet adhesion.

Determining the conformation of an adsorbed Br-PEG-peptide by long period X-ray standing wave fluorescence

Long-period X-ray standing wave fluorescence (XSW) and X-ray reflectivity techniques are employed to probe the conformation of a Br-poly(ethylene glycol) (PEG)-peptide adsorbate at the hydrated interface of a polystyrene substrate. The Br atom on this Br-PEG-peptide construct serves as a marker atom allowing determination by XSW of its position and distribution with respect to the adsorption surface with angstrom resolution. Adsorption occurs on native or ion-beam-modified polystyrene films that are spin-coated onto a Si substrate and display either nonpolar or polar surfaces, respectively. A compact, oriented monolayer of Br-PEG-peptide can be formed with the peptide end adsorbed onto the polar surface and the PEG end terminating with the Br tag extending into the aqueous phase. The 108-141 A distance of the Br atom from the polystyrene surface in this oriented monolayer is similar to the estimated approximately 150 A length of the extended Br-PEG-peptide. This Br-polystyrene distance depends on adsorption time and surface properties prior to adsorption. Incomplete multilayers form on the polar surface after sufficient adsorption time elapses. By contrast, adsorption onto the nonpolar surface is submonolayer, patchy, and highly disordered with an isotropic Br distribution. Overall, this combination of X-ray surface scattering techniques with a novel sample preparation strategy has several advantages as a real space probe of adsorbed or covalently bound biomolecules at the liquid-solid interface.

Protein adsorption on 18-alkyl chains immobilized on hydroxyl-terminated self-assembled monolayers

Surfaces of devices that contact blood accumulate adsorbed and denatured proteins perhaps triggering activation of the coagulation system. A renewable layer of albumin would biologically "passivate" the surface and prevent thrombus formation. Based on the approach of selectively binding albumin to fatty acids, different percentages of a compound with 18 carbons (C18) were immobilized on OH-terminated self-assembled monolayers (SAMs). Fourier transform infrared reflection absorption spectroscopy (IRAS), ellipsometry, contact angle (and surface free energy) and X-ray photoelectron spectroscopy (XPS) measurements were used to characterize these surfaces and proved that there is an efficient immobilization of C18. There is an increase of the thickness and hydrophobicity of SAMs with an increasing percentage of C18. Adsorption of human serum albumin (HSA) was evaluated using radiolabelled (125)I-HSA and IRAS. This study showed a gradual increase of HSA adsorption with the increase of surface hydrophobicity. Regarding competitive binding and exchangeability of albumin towards fibrinogen, it was proved, by radiolabelling, that SAMs prepared from solutions with 2.5% C18 presented considerable adsorption in a selective and reversible way.

Pretransition and progressive softening of bovine carbonic anhydrase II as probed by single molecule atomic force microscopy

To develop a simple method for probing the physical state of surface adsorbed proteins, we adopted the force curve mode of an atomic force microscope (AFM) to extract information on the mechanical properties of surface immobilized bovine carbonic anhydrase II under native conditions and in the course of guanidinium chloride-induced denaturation. A progressive increase in the population of individually softened molecules was probed under mildly to fully denaturing conditions. The use of the approach regime of force curves gave information regarding the height and rigidity of the molecule under compressive stress, whereas use of the retracting regime of the curves gave information about the tensile characteristics of the protein. The results showed that protein molecules at the beginning of the transition region possessed slightly more flattened and significantly more softened conformations compared with that of native molecules, but were still not fully denatured, in agreement with results based on solution studies. Thus the force curve mode of an AFM was shown to be sensitive enough to provide information concerning the different physical states of single molecules of globular proteins.

Adhesion mode atomic force microscopy study of dual component protein films

Molecular recognition imaging by AFM was extended to dual component protein films adsorbed on mica. AFM probes were functionalized by covalently linking polyclonal antibodies against fibrinogen. Adhesion mapping mode of AFM was used to generate both topographic images and adhesion images. The efficacy of the functionalized probes was first established by performing adhesion mapping on patterned dual component protein films formed by microcontact printing bovine serum albumin on a mica surface and then backfilling with fibrinogen. Next, adhesion mapping was done on randomly distributed two-component protein monolayers generated by sequential adsorption of submonolayer amounts of fibrinogen followed by backfilling with bovine serum albumin. The adhesion maps were used to generate binary recognition images where the specific and non-specific interactions were differentiated based on a statistically derived cut-off value. The surface coverage of fibrinogen obtained from the recognition image over the complete dual protein monolayer was similar to that obtained prior to backfilling with bovine serum albumin. The number of recognition events that were observed decreased by >80% after blocking the surface with anti-fibrinogen antibodies. This result demonstrated that the positive events in the recognition image were indeed specific antibody-fibrinogen interactions.

Quantification of streptavidin adsorption in microtitration wells

Streptavidin-coated microtitration plates have an important role as a solid phase in clinical diagnostics. We have designed techniques for evaluating quantitative and functional aspects of streptavidin adsorbed in microtitration wells. The theoretical monolayer adsorption capacity was modeled based on the molecular dimensions of the protein. Adsorbed streptavidin was quantified by direct labeling of protein with terbium chelate and with a sensitive bicinchoninic acid-based protein assay. A new small molecular weight (1037Da) reporter molecule, a europium-labeled biotin (Eu-biotin), was synthesized and used for monitoring adsorption and for determination of biotin-binding capacities of the streptavidin-coated wells. The theoretical monolayer adsorption of streptavidin yielded 6.20 pmol/cm(2) (370 ng) and consequently the theoretical adsorption capacity of a C12-format microtitration well (200 microl liquid, coated area 1.54 cm(2)) was 9.55 pmol/well (570 ng). Adsorption properties of streptavidin from two suppliers were tested, one of which yielded 350-380 ng/well while the other yielded over 500 ng/well. The biotin binding capacities were about 11 and 14 pmol/well, respectively. We managed to quantify surface-adsorbed streptavidin with sensitive fluorescence and protein measurement methods in the microtitration well. The new Eu-biotin reporter molecule enabled an exact and convenient determination of the biotin-binding capacities of streptavidin surfaces.

Surface chemistry modulates focal adhesion composition and signaling through changes in integrin binding

Biomaterial surface properties influence protein adsorption and elicit diverse cellular responses in biomedical and biotechnological applications. However, the molecular mechanisms directing cellular activities remain poorly understood. Using a model system with well-defined chemistries (CH3, OH, COOH, NH2) and a fixed density of the single adhesive ligand fibronectin, we investigated the effects of surface chemistry on focal adhesion assembly and signaling. Surface chemistry strongly modulated integrin binding and specificity--alpha5beta1 integrin binding affinity followed the pattern OH>NH2=COOH>CH3, while integrin alphaVbeta3 displayed the relationship COOH>NH2>>OH=CH3. Immunostaining and biochemical analyses revealed that surface chemistry modulates the structure and molecular composition of cell-matrix adhesions as well as focal adhesion kinase (FAK) signaling. The neutral hydrophilic OH functionality supported the highest levels of recruitment of talin, alpha-actinin, paxillin, and tyrosine-phosphorylated proteins to adhesive structures. The positively charged NH2 and negatively charged COOH surfaces exhibited intermediate levels of recruitment of focal adhesion components, while the hydrophobic CH3 substrate displayed the lowest levels. These patterns in focal adhesion assembly correlated well with integrin alpha5beta1 binding. Phosphorylation of specific tyrosine residues in FAK also showed differential sensitivity to surface chemistry. Finally, surface chemistry-dependent differences in adhesive interactions modulated osteoblastic differentiation. These differences in focal adhesion assembly and signaling provide a potential mechanism for the diverse cellular responses elicited by different material properties.

Protein adsorption on mixtures of hydroxyl- and methyl-terminated alkanethiols self-assembled monolayers

The effect of surface composition and wettability on the adsorption of human serum albumin (HSA) was studied. Self-assembled monolayers (SAMs) containing mixtures of longer chain methyl- and shorter chain hydroxyl-terminated alkanethiols on gold were used to produce a range of surfaces with different wettabilities and exposed functional groups. Different SAMs were characterized by X-ray photoelectron spectroscopy, water contact angles, and Fourier transform infrared reflection absorption spectroscopy (IRAS). HSA adsorption onto the different SAMs was evaluated by contact angle measurements (wetting tension determinations), radiolabeling of proteins, and IRAS. Concerning HSA adsorption, all the techniques demonstrated higher HSA adsorption on more hydrophobic surfaces. The wetting tension measurements and IRAS suggested a gradual decrease of the HSA adsorption with increases of surface hydrophilicity. Radiolabeled albumin measurements also demonstrated a significant decrease of HSA adsorption on the pure hydroxyl-terminated SAMs. However, no significant differences were detected between mixed and pure methyl-terminated SAMs. Studies of HSA exchangeability with human fibrinogen have suggested that an ideal percentage of hydroxyl groups on the surface may increase albumin affinity without fibrinogen adsorption.

Albumin adsorption on alkanethiols self-assembled monolayers on gold electrodes studied by chronopotentiometry

Chronopotentiometry was used to study the adsorption of human serum albumin (HSA) to self-assembled monolayers with the following terminal functional groups: CH(3), COOH and OH. Surfaces were characterized by X-ray photoelectron spectroscopy, water contact angle measurements and cyclic voltammetry. HSA coverage of the different SAMs was investigated by chronopotentiometry and the total amount of adsorbed protein was determined using radiolabelled albumin. Both techniques have demonstrated that HSA adsorption to the different SAM-modified electrodes increases in the following order: OH<COOH<CH(3)-terminated SAMs. A good correlation between coverage and total amount of HSA adsorbed was observed for long adsorption times (900s).

An effective method for quantitative evaluation of proteins adsorbed on biomaterial surfaces

An effective method for the quantitative evaluation of proteins adsorbed on biomaterial surfaces has been developed. First, the kinetic behavior of a range of human fibrinogen (Fib) adsorbed onto polystyrene (PS) films was investigated by using a reflectometry interference spectroscopy setup. The specific molecular number of adsorbed proteins, N(p,) was then defined. According to the definition, the numbers of Fib molecules adsorbed on PS films were calculated. An atomic force microscope (AFM) was used to scan the lateral distribution of the Fib molecules adsorbed on the PS films. From the AFM images, the practical specific molecular numbers were obtained by direct counting of the molecules. In order that the adsorbed number of Fib molecules on a unit area of the PS films could be counted easily, the solution concentration of proteins was reduced to 5 ag/mL (10(-18)g/mL). There was good consistency between the numbers calculated with the formula defined by us and the numbers counted from AFM images. Therefore, the results of the present study prove the validity of our definition of the specific molecular number of adsorbed proteins and the effectiveness of the reflectometry interference spectroscopy-based method for quantitative evaluation of adsorptive proteins.

Adhesion of human leukocytes to biomaterials: an in vitro study using alkanethiolate monolayers with different chemically functionalized surfaces

The adhesion of human leukocytes to self-assembled monolayers of well-defined surface chemistry was investigated in vitro. Polymorphonuclear (PMN) and mononuclear leukocytes were isolated from human blood by centrifugation techniques. The effect on adhesion of cell activation produced by pre-incubation of leukocytes with phytohemagglutinin (PHA) and phorbol 12-myristate 13-acetate (PMA) was also studied. Gold substrates were modified by treatment with alkanethiols with three different terminal chemical groups: COOH, OH, and CH(3). After incubation with the two subpopulations of leukocytes, the monolayers were washed, treated with fixative, stained with a Giemsa method, and observed by light microscopy to quantify the number of attached leukocytes. Comparative quantification of the density of leukocyte adhesion to the three types of self-assembled monolayers was determined. The hydrophobic surface expressing CH(3) was found to be the one that induced the highest adhesion density of leukocytes, both of PMN and mononuclear cells. In vitro activation of both mononuclear and PMN leukocytes further increased cell adhesion to the chemically defined monolayers that were used. This enhancement was higher for PHA-activated than for PMA-stimulated mononuclear cells, whereas PMA treatment of neutrophils resulted in a higher rate of adhesion of these cells than PHA stimulation.

Quantitative analysis of binary adsorbed protein films by time of flight secondary ion mass spectrometry

Time of flight secondary ion mass spectrometry (ToF-SIMS) is an ideal technique for the analysis of adsorbed protein films because of its surface sensitivity and chemical specificity. In this study, we examined ToF-SIMS with the multivariate calibration method partial least squares regression (PLSR) for the determination of the relative abundance of the components in binary protein films adsorbed onto mica, PTFE, and heptyl amine plasma polymer substrates. These results have been compared with independently measured 125I-radiolabeled protein adsorption experiments. By applying PLSR to the ToF-SIMS data, the relative abundance of the components in the binary adsorbed protein films was quantified, and the agreement between the ToF-SIMS and 125I-radiolabeling data was measured by the root mean square prediction error (RMSPE). Differences in protein quantification by PLSR and 125I-radiolabeling ranged from 5 to 25 mass % RMSPE and were highly dependent on the structure of the adsorbed protein film, the substrate surface chemistry and morphology, and the number of latent variables retained in the PLSR model. The limit of detection for the minor component in the adsorbed protein film was found to be approximately 10 mass %. This study demonstrates that the combination of ToF-SIMS and multivariate calibration provide complementary information to 125I-radiolabeling about the composition and structure of binary adsorbed protein films.

Surface plasmon resonance and free oscillation rheometry in combination: a useful approach for studies on haemostasis and interactions between whole blood and artificial surfaces

In haemostatic and biomaterial research biological processes at surfaces and in the bulk phase of the surface-contacting medium are important. The present work demonstrates the usefulness of the combination of surface plasmon resonance (SPR), sensitive to changes in refractive index at surfaces, and free oscillation rheometry (FOR), sensitive to rheological properties of the bulk, for simultaneous real-time measurements on coagulation and fibrinolysis of blood plasma and coagulation of whole blood. SFLLRN stimulated coagulation of native whole blood presented a higher SPR signal with different appearance than plasma coagulation, while the FOR signals corresponding to plasma and whole blood coagulation were similar. This indicated that the SPR technique was more sensitive to cell-surface interactions than to fibrin formation in whole blood during coagulation, while the FOR technique were equally sensitive to coagulation in whole blood and plasma. Spontaneous coagulation of native whole blood in contact with methyl- and hydroxyl-terminated self-assembled monolayers (SAM) on gold and gold surfaces regenerated after coagulation were also studied. The regenerated gold surfaces displayed the shortest coagulation times, although the contact-activation of blood coagulation for these surfaces was low. The methylated and hydroxylated surfaces were comparable in terms of coagulation activation, while the hydroxylated surfaces presented FOR signals that indicated detaching of the coagulum from the surface. The combination of SPR and FOR is well suited for studies of cell- and protein-surface interactions and simultaneous bulk processes. Possible applications are investigations of blood cell defects in patients and monitoring of native whole blood interactions with artificial surfaces.

Protein adsorption to oligo(ethylene glycol) self-assembled monolayers: experiments with fibrinogen, heparinized plasma, and serum

Low protein adsorption is believed advantageous for blood-contacting materials and ethylene glycols (EG)-based polymeric compounds are often attached to surfaces for this purpose. In the present study, the adsorption of fibrinogen, serum, and plasma were studied by ellipsometry on a series of well-defined oligo(EG) terminated alkane-thiols self-assembled on gold. The layers were prepared with compounds of the general structure HS-(CH2)15-CONH-EGn, where n = 2, 4, and 6. Methoxy-terminated tri(EG) undecanethiol and hydroxyl-terminated hexadecanethiol self-assembled monolayers (SAMs) were used as references. The results clearly demonstrate that the adsorption depends on the experimental conditions with small amounts of fibrinogen adsorbing from a single protein solution, but larger amounts of proteins from serum and plasma. The adsorption of fibrinogen and blood plasma decreased with an increasing number of EG repeats and was temperature-dependent. Significantly less serum adsorbed to methoxy tri(EG) than to hexa(EG) and more proteins remained on the latter surface after incubation in a sodium dodecyl sulfate (SDS) solution, indicating a looser protein binding to the methoxy-terminated surface. All surfaces adsorbed complement factor 3 (C3) from serum and plasma, although no surface-mediated complement activation was observed. The present study points to the importance of a careful choice of the protein model system before general statements regarding the protein repellant properties of potential surfaces can be made.

Binding of Biotin to Gold Surfaces Functionalized by Self-Assembled Monolayers of Cystamine and Cysteamine: Combined FT-IRRAS and XPS Characterization

As part of our project of developing a new IR-based immunosensor, we investigated the functionalization of gold substrates with thin organic films containing biotin ligands. A two-step procedure was developed consisting of the chemisorption of short amine-terminated organosulfur compounds, followed by their reaction at the solid liquid interface with an activated ester derivative of biotin. Covalent binding of biotin to these attachment layers was assessed by Fourier transform infrared reflection-absorption spectroscopy (FT-IRRAS) and X-ray photoelectron spectroscopy (XPS). The interaction of activated biotin with alcohol- and carboxylic acid-terminated monolayers was also investigated, and, as expected, no binding occurred. Moreover, mixed layers of short alcohol- and amine-terminated thiolates were successfully constructed at the gold surfaces and were shown to be the most efficient for the covalent binding of biotin thanks to the blocking effect of the thioalcohol, which prevented direct adsorption of biotin to the gold surface. Copyright 2001 Academic Press.

Design of supported membranes tethered via metal-affinity ligand-receptor pairs

Model lipid layers are very promising in investigating the complex network of recognition, transport and signaling processes at membranes. We have developed a novel and generic approach to create supported lipid membranes tethered by metal-affinity binding. By self-assembly we have generated various interfaces that display histidine sequences (6xHis) via polymer spacers. These histidine-functionalized interfaces are designed to allow specific docking and fusion of vesicles containing metal-chelating lipids. By means of surface plasmon resonance and atomic force microscopy we analyzed the formation and subsequently the structure of these solid-supported membranes. Although the affinity constant of single ligand-receptor pairs is only in the micromolar range, very stable immobilization of these membranes was observed. This behavior can be explained by multivalent interactions resembling many features of cell adhesion. The process is highly specific, because vesicle docking and bilayer formation are strictly dependent on the presence of metal-affinity ligand-receptor pairs. The surface accessibility and geometry of these tethered membranes were probed by binding of histidine-tagged polypeptides. The supported membranes show adsorption kinetics and values similar to planar supported monolayers. Using various combinations of metal-chelating and histidine-tagged lipids or thiols these metal-affinity-tethered membranes should make a great impact on probing and eventually understanding the dynamic dialog of reconstituted membrane proteins.

Synthesis, surface characterization, and platelet reactivity evaluation for the self-assembled monolayer of alkanethiol with sulfonic acid functionality

Owing to the capability of fabricating a well-defined chemical structure on the surface, self-assembled alkanethiols with a variety of terminal functionalities were prepared on the gold substrate for investigating the interactions between the biological environment and synthetic surface. In this study, we report the synthesis of the sulfonic acid terminated long-chain alkanethiol, 10-mercaptodecane-sulfonic acid, for direct preparation of a self-assembled monolayer (SAM) with -SO(3)H functionality. Nuclear magnetic resonance (NMR) and elemental analysis studies indicated that a high purity of sulfonic acid terminated alkanethiol was obtained. Surface characterization results showed that the -SO(3)H terminated SAM is hydrophilic and has a slightly higher hysteresis value, possibly because of the slower chain mobility of the bound sulfonic acid alkanethiol. Electron spectroscopy for chemical analysis (ESCA) analysis demonstrated that the -SO(3)H terminal group is situated in the outermost layer of the monolayer, as previous alkanethiol SAM structure models proposed. The platelet reactivity of the -SO(3)H SAM was higher than that of -OH SAM but less than the -CH(3) terminated one in vitro, whereas similar platelet reactivity was noticed between the -SO(3)H and -COOH SAMs. The higher platelet reactivity found on the -SO(3)H SAM could be caused by the higher surface functional group density inherent in the SAM structure and/or the composition and conformation state of the adsorbed protein layer.

Toward new biomaterials

Polymers are widely used for a large range of medical devices used as biomaterials on a temporary, intermittent, and long-term basis. It is now well accepted that the initial rapid adsorption of proteins to polymeric surfaces affects the performance of these biomaterials. However, protein adsorption to a polymer surface can be modulated by an appropriate design of the interface. Extensive study has shown that these interactions can be minimized by coating with a highly hydrated layer (hydrogel), by grafting on the surface different biomolecules, or by creating domains with chemical functions (charges, hydrophilic groups). Our laboratory has investigated the latter approach over the past 2 decades, in particular the synthesis and the biological activities of polymers to improve the biocompatibility of blood-contacting devices. These soluble and insoluble polymers were obtained by chemical substitution of macromolecular chains with suitable groups able to develop specific interactions with biological components. Applied to compatibility with the blood and the immune systems, this concept has been extended to interactions of polymeric biomaterials with eukaryotic and prokaryotic cells. The design of new biomaterials with low bacterial attachment is thus under intensive study. After a brief overview of current trends in the surface modifications of biocompatible materials, we will describe how biospecific polymers can be obtained and review our recent results on the inhibition of bacterial adhesion using one type of functionalized polymer obtained by random substitution. This strategy, applied to existing or new materials, seems promising for the limitation of biomaterial-associated infections.

Implant surfaces and interface processes

The past decades and current R&D of biomaterials and medical implants show some general trends. One major trend is an increased degree of functionalization of the material surface, better to meet the demands of the biological host system. While the biomaterials of the past and those in current use are essentially bulk materials (metals, ceramics, polymers) or special compounds (bioglasses), possibly with some additional coating (e.g., hydroxyapatite), the current R&D on surface modifications points toward much more complex and multifunctional surfaces for the future. Such surface modifications can be divided into three classes, one aiming toward an optimized three-dimensional physical microarchitecture of the surface (pore size distributions, "roughness", etc.), the second one focusing on the (bio) chemical properties of surface coatings and impregnations (ion release, multi-layer coatings, coatings with biomolecules, controlled drug release, etc.), and the third one dealing with the viscoelastic properties (or more generally the micromechanical properties) of material surfaces. These properties are expected to affect the interfacial processes cooperatively, i.e., there are likely synergistic effects between and among them: The surface is "recognized" by the biological system through the combined chemical and topographic pattern of the surface, and the viscoelastic properties. In this presentation, the development indicated above is discussed briefly, and current R&D in this area is illustrated with a number of examples from our own research. The latter include micro- and nanofabrication of surface patterns and topographies by the use of laser machining, photolithographic techniques, and electron beam and colloidal lithographies to produce controlled structures on implant surfaces in the size range 10 nm to 100 microns. Examples of biochemical modifications include mono- or lipid membranes and protein coatings on different surfaces. A new method to evaluate, e.g., biomaterial-protein and biomaterial-cell interactions--the Quartz Crystal Microbalance--is described briefly.