Size distributions and sources of elements in particulate matter at curbside, urban and rural sites in Beijing

Spatial and Temporal Distributions of Air Pollutants and Size Distribution of Aerosols over Central and Eastern China

The origins and spatial and temporal distributions of air pollutants (PM_2.5, PM₁₀, CO, SO₂, NO₂ and O₃) during May to June of 2015 were investigated using data from 1490 monitoring sites in China. Aerosol number concentrations and meteorological data from Shijiazhuang, Nanjing, and Suzhou were combined with the MIX Asian emission data and the HYSPLIT model. Furthermore, the diurnal variation, size distribution, and main sources of air pollutants and aerosols were selectively characterized in the North China Plain (NCP) and the Yangtze River Delta (YRD). High values of particulate matter concentrations (PM), including PM_2.5 and PM₁₀, occurred in the northwestern and central regions of eastern China. Elevated PM_2.5 and PM₁₀ concentrations represented natural dust sources and anthropogenic resident, power plant, industry, and traffic emissions sources, respectively. The concentrated distributions of SO₂ were similar to those of PM. The CO concentrations were distributed uniformly in China. High O₃ values occurred above the Qinghai province. During the observation period, the air masses mainly originated from the northwest NCP and from the southwest or northeastern ocean in the YRD, resulting in high concentrations of PM_2.5, PM₁₀, SO₂, and CO in the NCP, the average values of which were 61.8 ± 40.0, 118.8 ± 66.4, 24.1 ± 24.6 μg m^-3, and 1.2 ± 0.9 mg m^-3, respectively, and were 1.2, 1.4, 1.5, and 1.3 times larger than those in the YRD. NO₂ had higher concentrations in the YRD with an average of 43.7 ± 24.8 μg m^-3, which was 1.2 times larger than that in the NCP. The diurnal variations of PM, NO₂ and CO had bimodal distributions and SO₂ and O₃ had unimodal distributions in the NCP and YRD. The aerosol number concentrations had average values of 12,661 ± 5266, 11,189 ± 5905, and 12,797 ± 5931 cm^-3 in Shijiazhuang, Nanjing, and Suzhou. Their diurnal variations displayed trimodal peaks at 18:00-21:00, 11:00-14:00, and 06:00-08:00, and their spectra distributions were all unimodal with peaks at 60-70, 60-70, and 100-110 nm, respectively.

Reactive nitrogen chemistry in aerosol water as a source of sulfate during haze events in China

Fine-particle pollution associated with winter haze threatens the health of more than 400 million people in the North China Plain. Sulfate is a major component of fine haze particles. Record sulfate concentrations of up to ~300 μg m^-3 were observed during the January 2013 winter haze event in Beijing. State-of-the-art air quality models that rely on sulfate production mechanisms requiring photochemical oxidants cannot predict these high levels because of the weak photochemistry activity during haze events. We find that the missing source of sulfate and particulate matter can be explained by reactive nitrogen chemistry in aerosol water. The aerosol water serves as a reactor, where the alkaline aerosol components trap SO₂, which is oxidized by NO₂ to form sulfate, whereby high reaction rates are sustained by the high neutralizing capacity of the atmosphere in northern China. This mechanism is self-amplifying because higher aerosol mass concentration corresponds to higher aerosol water content, leading to faster sulfate production and more severe haze pollution.

Long-term trends of chemical characteristics and sources of fine particle in Foshan City, Pearl River Delta: 2008-2014

Foshan is a major international ceramic center and the most polluted city in the Pearl River Delta (PRD). Here we present the results of the first long-term PM2.5 (particles <2.5μm) sampling and chemical characterization study of the city. A total of 2774 samples were collected at six sites from 2008 to 2014, and analyzed for water soluble species, elements and carbonaceous species. The major constituents of PM2.5 were sulfate, OC (Organic Carbon), nitrate, ammonium and EC (Elemental Carbon), which accounted for 50%-88% of PM2.5. PM2.5 and the most abundant chemical species decreased from 2008 to 2011, but rebounded in 2012-2013. After 2008, the chemical composition of PM2.5 changed dramatically due to the implementation of pollution control measures. From 2008 to 2011, SO4(2-) and NO3(-) were the two largest components; subsequently, however, OC was the largest component. The respective contributions of SO4(2-), NO3(-) and OC to the sum of water soluble species and carbonaceous species were 30.5%, 22.9% and 19.9% in 2008; and 20.2%, 16.5% and 30.2% in 2014. Distinct differences in nitrate and sulfate, and in mass ratio [NO3(-)]/[SO4(2-)] imply that mobile sources tended to more important in Foshan during 2012-2014. The results indicate that pollution control measures implemented during 2008-2014 had a large effect on anthropogenic elements (Pb, As, Cd, Zn and Cu) and water soluble species, but little influence on crustal elements (V, Mn, Ti, Ba and Fe) and carbonaceous species. The PMF method was used for source apportionment of PM2.5. Industry (including the ceramic industry and coal combustion), vehicles and dust were the three most important sources and comprised 39.2%, 20.0% and 18.4% of PM2.5 in 2008, respectively. However, secondary aerosols, vehicles and industry were the three most important sources and comprised 29.5%, 22.4% and 20.4% of PM2.5 in 2014, respectively. During the seven year study interval, the contributions of primary sources (industry and dust) decreased significantly, but secondary sources increased dramatically. Industry, dust and vehicles contributed 36.6μgm(-3), 13.9μgm(-3), and 9.2μgm(-3) to the reduction of PM2.5, respectively.

Heavy metals bound to fine particulate matter from northern China induce season-dependent health risks: A study based on myocardial toxicity

Substantial epidemiological evidence has consistently reported that fine particulate matter (PM2.5) is associated with an increased risk of cardiovascular outcomes. PM2.5 is a complex mixture of extremely small particles and liquid droplets composed of multiple components, and there has been high interest in identifying the specific health-relevant physical and/or chemical toxic constituents of PM2.5. In the present study, we analyzed 8 heavy metals (Cr, Ni, Cu, Cd, Pb, Zn, Mn and Co) in the PM2.5 collected during four different seasons in Taiyuan, a typical coal-burning city in northern China. Our results indicated that total concentrations of the 8 heavy metals differed among the seasons. Zn and Pb, which are primarily derived from the anthropogenic source, coal burning, were the dominant elements, and high concentrations of these two elements were observed during the spring and winter. To clarify whether these heavy metals in the locally collected PM2.5 were associated with health effects, we conducted health risk assessments using validated methods. Interestingly, Pb was responsible for greater potential health risks to children. Because cardiovascular disease (CVD) is a main contributor to the mortality associated with PM2.5 exposure, we performed experimental assays to evaluate the myocardial toxicity. Our in vitro experiments showed that the heavy metal-containing PM2.5 induced season-dependent apoptosis in rat H9C2 cells through a reactive oxygen species (ROS)-mediated inflammatory response. Our findings suggested that heavy metals bound to PM2.5 produced by coal burning play an important role in myocardial toxicity and contribute to season-dependent health risks.

Outdoor urban nanomaterials: The emergence of a new, integrated, and critical field of study

Engineered nanomaterials (ENMs) are currently widely incorporated in the outdoor urban environmental fabric and numerous new applications and products containing ENMs are expected in the future. As has been shown repeatedly, products containing ENMs have the potential, at some point in their lifetime, to release ENMs into their surrounding environment. However, the expanding body in environmental nanomaterial research has not yet shifted toward ENMs in the context of the complex outdoor urban environment. This is especially surprising because the world's human populations are on a steady march toward more and more urbanization and technological development, accompanied with increased applications for ENMs in the outdoor urban environment. Our objective for this paper is therefore to review, assess, and provide new information in this emerging field. We provide an overview of nanomaterials (NMs, encompassing both ENMs and incidental nanomaterials, INMs) that are likely to be released in the urban environment from outdoor sources by discussing 1) the applications of ENMs that may lead to release of ENMs in urban areas, 2) the recently published data on the release of ENMs from novel nano-enabled applications in the outdoor urban environment, 3) the available literature on the occurrence of INMs in the atmosphere and within/on dust particles, and 4) the potential pathways and fate of NMs in the outdoor urban environment. This review is then followed by three case studies demonstrating the importance of NMs in the outdoor urban environment. The first and second case studies illustrate the occurrence of NMs in urban dust and stormwater ponds, respectively, whereas the third case study discusses the lessons learned from the release of NMs (e.g. Pt, ph and Rh) from automotive vehicle catalytic convertors. This article ends with a discussion of the research priorities needed to advance this emerging field of "outdoor urban nanomaterials" and to assess the potential risks of NMs in the context of urban environments.

Mass size distribution and source identification of particulate matter metal components at four urban sites and a background site of Istanbul

In this study, the size distribution characteristics and metal contents of particulate matter (PM) have been determined. In this scope, PM sampling has been done at five stations in Istanbul. PM filter samples were collected for eight different sizes using the Anderson cascade impactor. PM filters were decomposed and analyzed for 20 metals. The highest median concentration for Fe, Ca, K, and Mg, known as soil metals, were observed as follows: Fe and Ca were observed at Goztepe station (1.20 and 8.28 μg/m(3)), K was observed at Kilyos station (0.33 μg/m(3)), and Mg was observed at Avcilar station (0.37 μg/m(3)). The highest median concentrations for Zn, Cu, Pb, Ni, Cr, V, As, Se, Co, and Cd, known as anthropogenic metals, were observed at Avcilar, Goztepe, and Besiktas stations. Although the lowest metal concentrations was determined at Kilyos stations that was selected as the urban background. The enrichment factors (EFs) of most metals in the fine PM is higher than those in the coarse mode. According to the factor analyses, the most important emission source was observed to be industrial facilities at Avcilar; traffic at Besiktas; traffic and domestic heating at Goztepe; and domestic heating, sea salt aerosols, and ship traffic (in the Bosphorus Channel of Istanbul) at Rasathane.

Influence of quarry mining dust on PM2.5 in a city adjacent to a limestone quarry: Seasonal characteristics and source contributions

To understand the influence of quarry mining dust on particulate matter, ambient PM2.5 and quarry mining dust source samples were collected in a city near quarry facilities during 2013-2014. Samples were subject to chemical analysis for dust-related species (Al, Si, Ca, Fe, Ti), tracer metals, carbon components and water-soluble ions. Seasonal variations of PM2.5 and its main chemical components were investigated. Distinctive seasonal variations of PM2.5 were observed, with the highest PM2.5 concentrations (112.42μgm(-3)) in fall and lowest concentrations in summer (45.64μgm(-3)). For dust-related species, mass fractions of Si and Al did not show obvious seasonal variations, whereas Ca presented higher fractions in spring and summer and lower fractions in fall and winter. A combined receptor model (PMF-CMB) was applied to quantify the quarry mining dust contribution to PM2.5. Seven sources were identified, including quarry mining dust, soil dust, cement dust, coal combustion vehicles, secondary sulfate and secondary nitrate. On a yearly average basis, the contribution of quarry mining dust to PM2.5 was 6%. The contribution of soil dust to PM2.5 was comparable with cement dust (13% and 13%, respectively). Other identified sources included vehicle, secondary sulfate, secondary nitrate and coal combustion, which contributed 23, 15, 9 and 18% of the total mass, respectively. Air mass residence time (AMRT) analysis showed that northeast and southeast regions might be the major PM2.5 source during the sampling campaign. The findings of this study can be used to understand the characteristics of quarry mining dust and control strategies for PM2.5.

Size resolved metal distribution in the PM matter of the city of Turin (Italy)

A work on the characterization of the air quality in the city of Turin was carried out in different sampling periods, reflecting early autumn and winter conditions, including a snow episode during the early 2012 European cold wave. The concentrations of 13 elements in eight size fractions of the aerosol were determined using inductively coupled plasma-mass spectrometry. The collection was carried out with a Andersen MkII cascade impactor. The size distribution of elements allowed the identification of three main behavioural types: (a) elements associated with coarse particles (Cd, Cr, Cu, Fe, Mn, Mo and Sn); (b) elements found within fine particles (As, Co, Pb and V) and (c) elements spread throughout the entire size range (Ni and Zn). Principal Component Analysis allowed to examine the relationships between the inorganic elements and to infer about their origin. Chemometric investigation and assessment of similarity in the distribution led to similar conclusions on the sources. The concentration of gaseous trace pollutants (O3, NOx and VOCs) was determined. The concentrations of these pollutants are scarcely correlated with the metal contents of all the size classes of the PM. The differences found in the O3, NO2 and VOCs levels of the two winter campaigns due to the high photochemical reactivity in the period after the snow episode, do not reflect in differences in the metals distribution in the PM. Since PM metals, NOx and VOC have common sources, this behaviour is due to relevant differences in the transformation and deposition processes.

Source apportionment and health risk assessment of PM10 in a naturally ventilated school in a tropical environment

This study aimed to investigate the chemical composition and potential sources of PM10 as well as assess the potential health hazards it posed to school children. PM10 samples were taken from classrooms at a school in Kuala Lumpur's city centre (S1) and one in the suburban city of Putrajaya (S2) over a period of eight hours using a low volume sampler (LVS). The composition of the major ions and trace metals in PM10 were then analysed using ion chromatography (IC) and inductively coupled plasma-mass spectrometry (ICP-MS), respectively. The results showed that the average PM10 concentration inside the classroom at the city centre school (82µg/m(3)) was higher than that from the suburban school (77µg/m(3)). Principal component analysis-absolute principal component scores (PCA-APCS) revealed that road dust was the major source of indoor PM10 at both school in the city centre (36%) and the suburban location (55%). The total hazard quotient (HQ) calculated, based on the formula suggested by the United States Environmental Protection Agency (USEPA), was found to be slightly higher than the acceptable level of 1, indicating that inhalation exposure to particle-bound non-carcinogenic metals of PM10, particularly Cr exposure by children and adults occupying the school environment, was far from negligible.

Trace elements in particulate matter from metropolitan regions of Northern China: Sources, concentrations and size distributions

Public concerns over airborne trace elements (TEs) in metropolitan areas are increasing, but long-term and multi-site observations of size-resolved aerosol TEs in China are still lacking. Here, we identify highly elevated levels of atmospheric TEs in megacities and industrial sites in a Beijing-Tianjin-Hebei urban agglomeration relative to background areas, with the annual mean values of As, Pb, Ni, Cd and Mn exceeding the acceptable limits of the World Health Organization. Despite the spatial variability in concentrations, the size distribution pattern of each trace element was quite similar across the region. Crustal elements of Al and Fe were mainly found in coarse particles (2.1-9 μm), whereas the main fraction of toxic metals, such as Cu, Zn, As, Se, Cd and Pb, was found in submicron particles (<1.1 μm). These toxic metals were enriched by over 100-fold relative to the Earth's crust. The size distributions of Na, Mg, K, Ca, V, Cr, Mn, Ni, Mo and Ba were bimodal, with two peaks at 0.43-0.65 μm and 4.7-5.8 μm. The combination of the size distribution information, principal component analysis and air mass back trajectory model offered a robust technique for distinguishing the main sources for airborne TEs, e.g., soil dust, fossil fuel combustion and industrial emissions, at different sites. In addition, higher elemental concentrations coincided with westerly flow, indicating that polluted soil and fugitive dust were major sources of TEs on the regional scale. However, the contribution of coal burning, iron industry/oil combustion and non-ferrous smelters to atmospheric metal pollution in Northern China should be given more attention. Considering that the concentrations of heavy metals associated with fine particles in the target region were significantly higher than those in other Asian sites, the implementations of strict environmental standards in China are required to reduce the amounts of these hazardous pollutants released into the atmosphere.

Characterization and estimation of human airway deposition of size-resolved particulate-bound trace elements during a recent haze episode in Southeast Asia

Toxic elements present in airborne particulate matter (PM) are associated with human health effects; however, their toxic characteristics depend on the source of their origins and their concentrations in ambient air. Twenty four elements (Al, B, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, Ga, K, Li, Mg, Mn, Na, Ni, Pb, Se, Sr, Te, Tl, and Zn) in 12 different size fractions of PM ranging from 10 nm to 10 μm were characterized in Singapore during two different atmospheric conditions (smoke haze and non-haze periods) in 2012 for the first time. In addition, their possible sources were identified based on backward air trajectory analysis and principal component analysis (PCA). The health implications of inhalable particles were assessed using a human airway deposition model, the Multiple-Path Particle Dosimetry model (MPPD). The results concerning particle-bound trace elements are interpreted in terms of coarse (PM2.5-10), fine (PM2.5), ultrafine (PM0.01-0.1, 0.01 μm < Dp < 0.10 μm), and nano (PM0.01-0.056, 0.01 μm < Dp < 0.056 μm) particles. The ratios of elemental concentrations measured between the smoke haze episode and the non-haze period in coarse, fine, ultrafine, and nano particles varied from 1.2 (Bi) to 6.6 (Co). Both the PCA and backward trajectory analysis revealed that trans-boundary biomass-burning emissions from Indonesia were primarily responsible for enhanced concentrations of particulate-bound elements during the smoke haze episode. The particle depositions in the respiratory system were higher during the smoke haze episode compared to the non-haze period. The study finds that ultrafine and nano particles present in the atmosphere have higher tendencies to be deposited into the deeper parts of the respiratory system, compared to coarse and fine particles.

Source of atmospheric heavy metals in winter in Foshan, China

Foshan is a ceramics manufacturing center in the world and the most polluted city in the Pearl River Delta (PRD) in southern China measured by the levels of atmospheric heavy metals. PM2.5 samples were collected in Foshan in winter 2008. Among the 22 elements and ions analyzed, 7 heavy metals (Zn, V, Mn, Cu, As, Cd and Pb) were studied in depth for their levels, spatiotemporal variations and sources. The ambient concentrations of the heavy metals were much higher than the reported average concentrations in China. The levels of Pb (675.7 ± 378.5 ng/m(3)), As (76.6 ± 49.1 ng/m(3)) and Cd (42.6 ± 45.2 ng/m(3)) exceeded the reference values of NAAQS (GB3095-2012) and the health guidelines of the World Health Organization. Generally, the levels of atmospheric heavy metals showed spatial distribution as: downtown site (CC, Chancheng District)>urban sites (NH and SD, Nanhai and Shunde Districts)>rural site (SS, Shanshui District). Two sources of heavy metals, the ceramic and aluminum industries, were identified during the sampling period. The large number of ceramic manufactures was responsible for the high levels of atmospheric Zn, Pb and As in Chancheng District. Transport from an aluminum industry park under light north-west winds contributed high levels of Cd to the SS site (Shanshui District). The average concentration of Cd under north-west wind was 220 ng/m(3), 20.5 times higher than those under other wind directions. The high daily maximum enrichment factors (EFs) of Cd, Pb, Zn, As and Cu at all four sites indicated extremely high contamination by local emissions. Back trajectory analysis showed that the heavy metals were also closely associated with the pathway of air mass. A positive matrix factorization (PMF) method was applied to determine the source apportionment of these heavy metals. Five factors (industry including the ceramic industry and coal combustion, vehicle emissions, dust, transportation and sea salt) were identified and industry was the most important source of atmospheric heavy metals. The present paper suggests a control policy on the four heavy metals Cd, Pb, Zn, and Cu, and suggests the inclusion of As in the ceramic industry emission standard in the future.

Beijing ambient particle exposure accelerates atherosclerosis in ApoE knockout mice by upregulating visfatin expression

Ambient particulate matter (PM) exposure has been associated with atherosclerosis. However, research on the effect of real-world exposure to ambient PM in regulating visfatin expression in an animal model is very limited. The objective is to investigate whether Beijing ambient PM exposure could accelerate atherosclerosis in ApoE knockout (ApoE(-/-)) mice by upregulating visfatin expression. Forty male ApoE(-/-) mice were exposed to untreated ambient air (PM group, n = 20) or filtered air (FA group, n = 20), 24 h/day, 7 days/week, for 2 months. During the exposure, the mass concentrations of PM2.5 and PM10 in the two groups were continuously monitored. Moreover, a receptor source apportionment model was applied to apportion sources of PM2.5. At the end of the exposure, visfatin in plasma and aorta, biomarkers of inflammation, oxidative stress and lipid metabolism in blood samples, and bronchoalveolar lavage fluid (BALF) were determined, and the plaque area of the atherosclerosis lesions was quantified. PM-exposed mice were significantly higher than FA-exposed mice in terms of plasma visfatin, OxLDL, MDA, serum TC, LDL, TNF-α as well as IL-6, TNF-α, OxLDL, and MDA in BALF, while SOD and GSH-Px activities in plasma and BALF were reduced in PM-exposed mice. Pathological analysis of the aorta demonstrated that the plaque area and visfatin protein in the PM group increased significantly compared to the FA group. Our findings indicate that ambient PM exposure could accelerate atherosclerosis, which is related to visfatin upregulation, as well as the activation of inflammation and oxidative stress.

The Research Progress of Heavy Metals in PM2.5

PM2.5 is one of the most important components in air pollution. It is also the focus of the most closely watched at home and abroad. Based on its small size, complex components, and strongenvironmental activity, it can be used as a carrier for chemicals, heavy metals, bacteria, toxins and carcinogens into the body. Then, as a result, it will affect Human Body Health. Heavy metals are important components of PM2.5, and the long-term accumulation of heavy metals in PM2.5 poses a great threat on human health and the environment. This paper reviewed the sources, distribution methods,chemical form, detection methods, disposal way, research progress of heavy metals in PM2.5. As a result, it provided a reference for in-depth study on the future.

Oxidative capacities of size-segregated haze particles in a residential area of Beijing

The frequent haze days around the Chinese capital of Beijing in recent years have aroused great attention owing to the detrimental effects on visibility and public health. To discover the potential health effects of the haze, oxidative capacities of airborne particles collected in Beijing during haze and clear days were comparably assessed by a plasmid scission assay. Eleven water-soluble trace elements (As, Cd, Cr, Cu, Mn, Ni, Pb, V, Se, Tl, and Zn) in the size-segregated airborne particles were quantitatively analyzed by inductively coupled plasma mass spectrometry, and most of the water-soluble trace elements were found to mainly concentrate in the fine particle size of 0.56-1.0 microm. In comparison with clear days, the mass concentrations of 11 analyzed water-soluble trace elements remarkably increased during haze days, and the oxidative capacities determined by the plasmid scission assay were markedly elevated accordingly during the haze days under the same dosage of particles as for those during clear days. Water-soluble trace elements in airborne particles, such as Cu, V, and particularly Zn, were found to have significantly positive correlations with the plasmid DNA damage rates. Because Cu, V, and Zn have been considered as bioavailable elements, the evident increase of these elements during haze days may be greatly harmful to human health.

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate (TSP) and PM10 samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were (183 +/- 73), (201 +/- 84) and (190 +/- 66) microg/m3 respectively, and the average PM10 were (171 +/- 82), (178 +/- 65) and (179 +/- 55) microg/m3 respectively. The lowest TSP and PM10 concentrations occurred at the background Shaping site of Changsha. The average ratio of p(PM10)/p(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8-56.5, 18.1-76.3, 3.9-26.1 and 148.0-460.9 ng/m3, respectively, while in PM10 samples, were 16.4-42.1, 15.5-67.9, 3.3-22.2 and 127.9-389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.

Size distribution, characteristics and sources of heavy metals in haze episode in Beijing

Size segragated samples were collected during high polluted winter haze days in 2006 in Beijing, China. Twenty nine elements and 9 water soluble ions were determined. Heavy metals of Zn, Pb, Mn, Cu, As, Cr, Ni, V and Cd were deeply studied considering their toxic effect on human being. Among these heavy metals, the levels of Mn, As and Cd exceeded the reference values of National Ambient Air Quality Standard (GB3095-2012) and guidelines of World Health Organization. By estimation, high percentage of atmospheric heavy metals in PM2.5 indicates it is an effective way to control atmospheric heavy metals by PM2.5 controlling. Pb, Cd, and Zn show mostly in accumulation mode, V, Mn and Cu exist mostly in both coarse and accumulation modes, and Ni and Cr exist in all of the three modes. Considering the health effect, the breakthrough rates of atmospheric heavy metals into pulmonary alveoli are: Pb (62.1%) > As (58.1%) > Cd (57.9%) > Zn (57.7%) > Cu (55.8%) > Ni (53.5%) > Cr (52.2%) > Mn (49.2%) > V (43.5%). Positive matrix factorization method was applied for source apportionment of studied heavy metals combined with some marker elements and ions such as K, As, SO4(2-) etc., and four factors (dust, vehicle, aged and transportation, unknown) are identified and the size distribution contribution of them to atmospheric heavy metals are discussed.

Beijing ambient particle exposure accelerates atherosclerosis in ApoE knockout mice

BACKGROUND

Air pollution is associated with significant adverse health effects including increased cardiovascular morbidity and mortality. However research on the cardiovascular effect of "real-world" exposure to ambient particulate matter (PM) in susceptible animal model is very limited. In this study, we aimed to investigate the association between Beijing ambient particle exposure and the atherosclerosis development in the apolipoprotein E knockout mice (ApoE(-/-) mice).

METHODS

Two parallel exposure chambers were used for whole body exposure among ApoE knockout mice. One of the chambers was supplied with untreated ambient air (PM group) and the other chamber was treated with ambient air filtered by high-efficiency particulate air (HEPA) filter (FA group). Twenty mice were divided into two groups and exposed to ambient PM (n=10 for PM group) or filtered air (n=10 for FA group) for two months from January 18th to March 18th, 2010. During the exposure, the mass concentrations of PM2.5 and PM10 in the two chambers were continuously monitored. Additionally, a receptor source apportionment model of chemical mass balance using 19 organic tracers was applied to determine the contributions of sources on the PM2.5 in terms of natural gas, diesel vehicle, gasoline vehicle, coal burning, vegetable debris, biomass burning and cooking. At the end of the two-month exposure, biomarkers of oxidative stress, inflammation and lipid metabolism in bronchoalveolar lavage fluid (BAL) and blood samples were determined and the plaque area on the aortic endothelium was quantified.

RESULTS

In the experiment, the concentrations of PM10 and PM2.5 in PM chamber were 99.45μg/m(3) and 61.0μg/m(3) respectively, while PM2.5 in FA chamber was 17.6μg/m(3). Source apportionment analysis by organic tracers showed that gasoline vehicle (39.9%) and coal burning (24.3%) emission were the two major sources contributing to the mass concentration of PM2.5 in Beijing. Among the ApoE knockout mice, the PM group were significantly higher than the FA group in terms of serum total cholesterol, low-density lipoprotein, tumor necrosis factor-alpha (TNF-alpha) and C-reactive protein as well as TNF-alpha and interleukin-6 in BAL. Also the total antioxidant capacity and oxidized low-density lipoprotein were significantly different between the two groups. In addition, pathological analysis of aortic arch reveals that the plaques area in the PM group increased significantly compared to the FA group.

CONCLUSIONS

Our results demonstrated that ambient PM exposure could induce considerable oxidative stress and systemic inflammation in ApoE knockout mice and contribute to the progression of atherosclerosis.