Origin of the stabilization energy of perylene excimer as studied by fluorescence and near-IR transient absorption spectroscopy

Amplified fluorescence emission of bolaamphiphilic perylene-azacrown ether derivatives directed towards molecular recognition events

Long-term creative approaches have been considered in the design of molecular probes to overcome the quenching effect of important dyes in an aqueous medium. Using the rational donor-acceptor based design principle, we demonstrate herein the different fluorescence states of a non-conjugated symmetrical perylene-azacrown ether system in a solution, from the molecular to the aggregated states. The ethylene-spacer is exceptionally capable of fluorescence enhancement, even in the aggregated state (organic nanoparticle, ONPs, 44 nm), overcoming the quenching effect on changing the solvent from tetrahydrofuran to water. The ONPs with crown ether receptors at the surface show colloidal stability in an aqueous solution. Furthermore, an improved fluorescent state is developed via ONPs-polymer (protamine, Pro) hybridization. Supramolecular interactions between the crown ring and the guanidinium group in Pro play an important role in the ONPs-Pro hybrid formation. The decorated fluorescent hybrid state is finally used as a nano-probe for sensing heparin via the turn-OFF mechanism. The decoration method is further generalized by recognition of the nucleotides. Herein, we detail the bottom-up approach to the molecular design and development of the different fluorescent states of a useful probe. Most excitingly, this new approach is very general and adaptive to facile detection.

Using molecular vibrations to probe exciton delocalization in films of perylene diimides with ultrafast mid-IR spectroscopy

Ultrafast vibrational spectroscopy provides a direct comparison exciton delocalization in crystalline perylenediimides that informs their use in organic electronic applications.

Graphene Oxide Inhibits Antibiotic Uptake and Antibiotic Resistance Gene Propagation

Antibiotics and antibiotic resistance genes (ARGs) in the natural environment have become substantial threats to the ecosystem and public health. Effective strategies to control antibiotics and ARG contaminations are emergent. A novel carbon nanomaterial, graphene oxide (GO), has attracted a substantial amount of attention in environmental fields. This study discovered the inhibition effects of GO on sulfamethoxazole (SMZ) uptake for bacteria and ARG transfer among microorganisms. GO promoted the penetration of SMZ from intracellular to extracellular environments by increasing the cell membrane permeability. In addition, the formation of a GO-SMZ complex reduced the uptake of SMZ in bacteria. Moreover, GO decreased the abundance of the sulI and intI genes by approximately 2-3 orders of magnitude, but the global bacterial activity was not obviously inhibited. A class I integron transfer experiment showed that the transfer frequency was up to 55-fold higher in the control than that of the GO-treated groups. Genetic methylation levels were not significant while sulI gene replication was inhibited. The biological properties of ARGs were altered due to the GO-ARG noncovalent combination, which was confirmed using multiple spectral analyses. This work suggests that GO can potentially be applied for controlling ARG contamination via inhibiting antibiotic uptake and ARG propagation.

Development of a femtosecond time-resolved near-IR multiplex stimulated Raman spectrometer in resonance with transitions in the 900–1550 nm region

A femtosecond time-resolved near-IR multiplex stimulated Raman spectrometer has been developed for investigating the structural dynamics in charge-transfer processes.

Amphiphilic tribranched scaffolds with polyaromatic panels that wrap perylene stacks displaying unusual emissions

A spherical assembly containing a perylene stack, prepared from a rigid tribranched scaffold and perylene, exhibits unusual Y-emission in water at room temperature. In contrast, an analogous assembly from a flexible scaffold and perylene shows E-emission under the same conditions.

Noncovalent Binding of Polycyclic Aromatic Hydrocarbons with Genetic Bases Reducing the in Vitro Lateral Transfer of Antibiotic Resistant Genes

In current studies of noncovalent interactions of polycyclic aromatic hydrocarbons (PAHs) with genetic units, the impact of such interactions on gene transfer has not been explored. In this study, we examined the association of some widely occurring PAHs (phenanthrene, pyrene, benzo[g,h,i]perylene, and other congeners) with antibiotic resistant plasmids (pUC19). Small molecular PAHs (e.g., phenanthrene) bind effectively with plasmids to form a loosely clew-like plasmid-PAH complex (16.5-49.5 nm), resulting in reduced transformation of ampicillin resistance gene (Ampr). The in vitro transcription analysis demonstrated that reduced transformation of Ampr in plasmids results from the PAH-inhibited Ampr transcription to RNA. Fluorescence microtitration coupled with Fourier transform infrared spectroscopy (FTIR) and theoretical interaction models showed that adenine in plasmid has a stronger capacity to sequester small Phen and Pyre molecules via a π-π attraction. Changes in Gibbs free energy (ΔG) suggest that the CT-PAH model reliably depicts the plasmid-PAH interaction through a noncovalently physical sorption mechanism. Considering the wide occurrence of PAHs and antibiotic resistant genes (ARGs) in the environment, our findings suggest that small-sized PAHs can well affect the behavior of ARGs via above-described noncovalent interactions.

Spectroscopic Demonstration of Exciton Dynamics and Excimer Formation in a Sterically Controlled Perylene Bisimide Dimer Aggregate

Although it is commonly known that H-type PBI aggregates give rise to a broad, red-shifted excimer fluorescence with considerably longer fluorescence lifetimes than observed for the monomers, the underlying mechanisms of excimer formation and other relevant exciton dynamics in such π-stacked systems are still far from being understood. In this context, we demonstrate a thorough spectroscopic investigation on the exciton relaxation pathways, including excimer formation, in a perylene-3,4:9,10-bis(dicarboximide) (PBI) dimer aggregate 1 by using time-resolved fluorescence and transient absorption spectroscopy combined with excitation-power and polarization dependence. It was found that the excited dimer formation process followed by structural rearrangement is approximately two times faster than observed within larger PBI aggregates. Excitation-power-dependent transient absorption decay profiles revealed the fully delocalized nature of excitons in the dimer as opposed to larger stacks.

Excimer formation in cofacial and slip-stacked perylene-3,4:9,10-bis(dicarboximide) dimers on a redox-inactive triptycene scaffold

Excitation energy transfer in perylene-3,4:9,10-bis(dicarboximide) (PDI) aggregates is of interest for light-harvesting applications of this strongly absorbing and π-π stacking chromophore. Here we report the synthesis and characterization of two PDI dimers in which the chromophores are covalently linked by a redox-inactive triptycene bridge in orientations that are cofacial (1) and slip-stacked along their N-N axes (2). Femtosecond transient absorption experiments on 1 and 2 reveal rapid exciton delocalization resulting excimer formation. Cofacial π-π stacked dimer 1 forms a low-energy excimer state absorption (λmax = 1666 nm) in τ = ∼2 ps after photoexcitation. Inserting a phenyl spacer on the bridge to generate a slip-stacked PDI-PDI geometry in 2 results in a less stable excimer state (λmax = 1430 nm), which forms in τ = ∼12 ps due to decreased electronic coupling. The near-infrared (NIR) excimer absorption of cofacial dimer 1 is ∼120 meV lower in energy than that of slip-stacked dimer 2, further highlighting electronic differences between these states.

Direct Observation of Ultrafast Excimer Formation in Covalent Perylenediimide Dimers Using Near-Infrared Transient Absorption Spectroscopy

Energy transfer in perylene-3,4:9,10-bis(dicarboximide) (PDI) aggregates is often limited by formation of a low-energy excimer state. Formation dynamics of excimer states are often characterized by line shape changes and peak shift dynamics in femtosecond visible transient absorption spectra. Femtosecond near-infrared transient absorption experiments reveal a unique low-energy transition that can be used to identify and characterize this state without overlapping excited singlet-state absorption. Three covalently bound PDI dimers with differing PDI-PDI distances were studied to probe the influence of interchromophore electronic coupling on the PDI excimer transient spectra and dynamics.

Excited-state dynamics in an α-perylene single crystal: two-photon- and consecutive two-quantum-induced singlet fission

Excited-state dynamics in α-perylene single crystals is studied by time-resolved fluorescence and transient absorption techniques under different excitation conditions. The ultrafast lifetimes of the "hot" excimer (Y) state were resolved. Three competing excited-states decay channels are observed: excimer formation, dimer cation generation, and singlet fission. The singlet fission induced by two-photon and consecutive two-quantum absorption is reported for the first time in an α-perylene crystal.

Effect of local and global structural order on the performance of perylene diimide excimeric solar cells

Herein, we present a detailed study of the structure-function relationship in the organic photovoltaic (OPV) blend film composed of N,N'-bis(1-ethylpropyl)-perylene-3,4,9,10-tetracarboxylic diimide (EP-PDI) and the low energy gap copolymer of poly[4,8-bis-substituted-benzo[1,2-b:4,5-b']dithiophene-2,6-diyl-alt-4-substituted-thieno[3,4-b]thiophene-2,6-diyl] (PBDTTT-E-O). The hierarchical organization in the photoactive layers and in extruded fibers of PBDTTT-E-O:EP-PDI was studied by fluorescence optical microscopy, atomic force microscopy, and wide-angle X-ray scattering (WAXS). WAXS revealed a nanophase-separated structure where PBDTTT-E-O domains of 4.3 nm in size coexist with EP-PDI domains of 20 nm size. Thermal annealing results in an increase of the PBDTTT-E-O domains, but it does not affect the size of the EP-PDI domains. Only the length of the EP-PDI columns in each domain is increased by thermal treatment. The photophysical characterization of the PBDTTT-E-O:EP-PDI layers and the electrical characterization of the corresponding OPV and unipolar carrier devices were performed. The quenching of the EP-PDI excimer luminescence is correlated with the photocurrent generation efficiency of the OPV devices. At high annealing temperatures the EP-PDI columnar length becomes larger than the previously reported diffusion length of the PDI excimer, and fewer excimers dissociate at the EP-PDI/polymer interfaces, leading to reduced photocurrent generation. The charge transport properties of the PBDTTT-E-O:EP-PDI blend film were studied as a function of the active layer microstructure that was tuned by thermal treatment. Thermal processing increases electron mobility, but the poor connectivity of the EP-PDI domains keeps hole mobility six times higher. In respect to the as-spun OPV device, a 3-fold increase is found in the power conversion efficiency of the device annealed at 100 °C. The high surface roughness of the PBDTTT-E-O:EP-PDI photoactive layer impedes the efficient extraction of charges, and a thin and smooth perylene-3,4,9,10-tetracarboxylic bisbenzimidazole overlayer is required for increasing the device performance to a power conversion efficiency (PCE) ∼ 1.7%. The inversion in the polarity of the device contacts resulted in an inverted device with PCE ∼ 1.9%. We provide rational guidelines for the accurate tuning of the layer microstructure in PDI-based photoactive layers of efficient OPV devices. Local disorder in the EP-PDI aggregates is essential (i) for the optimum electron transport that is ensured by the efficient connectivity of the EP-PDI columns in adjacent EP-PDI domains and (ii) for preventing the stabilization of the neutral photoexcitations in the EP-PDI domains in the form of slowly diffusive excimers. The high photocurrent generation efficiency achieved suggests the EP-PDI excimers are formed faster than the activation of triplet states, and photocurrent losses are minimized.

Excimer luminescence from nonresonantly excited pyrene and perylene molecules in solution

By nonresonant excitation below the absorption edge of pyrene and perylene molecules in solution, efficient excimer luminescence is observed. For perylene in solution, there are two kinds of nonresonant excimer emission that closely resemble Y- and E-emissions in perylene crystal and perylene in polymer. The concentration dependence of the photon flux density of monomer and excimer emission is reasonably explained by a simple model with a few fitting parameters based on the ordinary excimer formation process, in which the excited-state monomer interacts with a ground-state monomer. Observed quantum efficiency of excimer formation is by orders of magnitude higher than that expected if a monomer is excited from thermally populated vibrational levels. The experimental evidence for direct resonant excitation of excimers in perylene nanocrystals is obtained from the absence of anti-Stokes emission. This is due to a symmetry-breaking effect close to crystal surface, suggesting that excimers are formed through a more efficient process in solution, such as resonant excitation of weakly interacting molecules with a symmetry-broken intermolecular configuration.

Singlet exciton fission in polycrystalline thin films of a slip-stacked perylenediimide

The crystal structure of N,N-bis(n-octyl)-2,5,8,11-tetraphenylperylene-3,4:9,10-bis(dicarboximide), 1, obtained by X-ray diffraction reveals that 1 has a nearly planar perylene core and π-π stacks at a 3.5 Å interplanar distance in well-separated slip-stacked columns. Theory predicts that slip-stacked, π-π-stacked structures should enhance interchromophore electronic coupling and thus favor singlet exciton fission. Photoexcitation of vapor-deposited polycrystalline 188 nm thick films of 1 results in a 140 ± 20% yield of triplet excitons ((3*)1) in τ(SF) = 180 ± 10 ps. These results illustrate a design strategy for producing perylenediimide and related rylene derivatives that have the optimized interchromophore electronic interactions which promote high-yield singlet exciton fission for potentially enhancing organic solar cell performance and charge separation in systems for artificial photosynthesis.

Ab initio studies of aromatic excimers using multiconfiguration quasi-degenerate perturbation theory

The aromatic excimers of benzene, naphthalene, anthracene, pyrene, and perylene are systematically investigated using the multiconfiguration quasi-degenerate perturbation theory (MCQDPT) method, which is one of high-level ab initio quantum chemical methods. The reference configuration space for MCQDPT is carefully designed for an appropriate description of the target electronic state with a tractable computational cost. The dimers with eclipsed parallel arrangement are investigated. The basis set dependence of the selected spectroscopic parameters is examined for the benzene and naphthalene dimers, and that of the excimer binding energy is found to be significant. In contrast, the equilibrium intermolecular distance and excimer fluorescence energy are less sensitive to the size of the basis sets used, and they agree with the corresponding experimental values, even with a nonextensive basis set size. The calculated spectroscopic parameters for anthracene, pyrene, and perylene dimers are also in good agreement with the experimental results. The electronic properties of the excimers are discussed in relation to those of the corresponding monomers. The wave functions of the excimers are analyzed in detail to clarify the origin of the attractive nature between the two monomers.

The photophysical Characterisation of Novel 3,9-Dialkyloxy- and Diacyloxyperylenes

The fundamental photophysical properties of three symmetrically substituted 3,9-perylene analogues were examined in a diverse range of solvents. All three compounds exhibited solvent-dependent fluorescence quantum yield, which was lower than that of perylene or its diimides. Whilst the absence of a large excited state dipole moment suggests that there is no preferential charge accumulation in one side of the molecules, the data suggest that intramolecular electron transfer occurs and that such an event causes additional photochemical mechanisms in chlorinated compounds where the fluorescence quantum yield is lower than in all other solvents and the values of the fluorescence decay change significantly. The dyes could be an interesting new class of fluorescence tags for labeling biomolecules and as dyes for organic photovoltaic materials.

Fluorescent TiO2 powders prepared using a new perylene diimide dye: Applications in latent fingermark detection

A new, highly fluorescent dye was synthesised using oleylamine combined with a perylene dianhydride compound. The new dye was characterised by 1H NMR, UV-vis spectroscopy and fluorescence spectroscopy as well as quantum yield. The dye was absorbed onto titanium dioxide nanoparticles for use as a fingerprint detection powder. The new fluorescent powder was applied to latent fingermarks deposited onto different non-porous surfaces and compared with commercial fluorescent powders. The powder exhibits strong fluorescence at 650-700 nm under excitation at 505 nm. On glass surfaces, the new powder gave images showing tertiary-level detail of the fingermark ridges with almost no background development. Compared with current magnetic fluorescent powders, the new powder was slightly weaker in fluorescence intensity but produced significantly less background development, resulting in good contrast between the fingermark and the substrate.

Photoluminescence and Conductivity of Self-Assembled π–π Stacks of Perylene Bisimide Dyes

The self-assembly of a new, highly fluorescent perylene bisimide dye 2 into pi stacks, both in solution and condensed phase, has been studied in detail by NMR spectroscopy, vapor pressure osmometry (VPO), UV/Vis and fluorescence spectroscopy, differential scanning calorimetry (DSC), optical polarizing microscopy (OPM) and X-ray diffraction. The NMR and VPO measurements revealed the formation of extended pi-pi stacks of the dye molecules in solution. The aggregate size determined from VPO and DOSY NMR measurements agree well with that obtained from the concentration and temperature-dependent UV/Vis spectral data by employing the isodesmic model (equal K model). In the condensed state, dye 2 possesses a hexagonal columnar liquid crystalline (LC) phase as confirmed by X-ray diffraction analysis. The columnar stacking of this dye has been further explored by atomic force microscopy (AFM). Well-resolved columnar nanostructures of the compound are observed on graphite surface. A color-tunable luminescence from green to red has been observed upon aggregation which is accompanied by an increase of the fluorescence lifetime and depolarization. The observed absorption properties can be explained in terms of molecular exciton theory. The charge transport properties of dye 2 have been investigated by pulse radiolysis-time resolved microwave conductivity measurements and a 1D charge carrier mobility up to 0.42 cm(2) V(-1) s(-1) is obtained. Considering the promising self-assembly, semiconducting, and luminescence properties of this dye, it might serve as a useful functional material for nano(opto)electronics.

Dynamics of short as compared with long poly(acrylic acid) chains hydrophobically modified with pyrene, as followed by fluorescence techniques

New low and high molecular weight poly(acrylic acid), PAA, 2000 g mol(-1) and 450,000 g mol(-1), respectively, were tagged with pyrene (low and high contents of probe) and its behaviour in solution was investigated using absorption and fluorescence (steady-state and time-resolved) techniques. Fluorescence data shows that the degree and level of intramolecular association strongly depends on the molecular weight. With the short pyrene-labeled PAA chains in aqueous solution, the excimer-to-monomer fluorescence ratio I(E)/I(M) decreases with the increase of pH, oppositely to the increase in the I(E)/I(M) ratio with the increase in pH previously observed with the long chain PAA. Time-resolved data suggest that excimer formation with the short pyrene-labeled PAA polymers (ca. 28 acrylic acid monomers per chain) in water is largely due to excitation of Ground State Dimers, GSD. The increment of pH, and the consequent gradual ionization of the carboxylic groups in the chain, initially increases the fraction of GSD, possibly due to the occurrence of special micelle-like chain conformations, inside which the pyrene units are accommodated. A further increase of the pH above the pK(a) values, resulting in the full ionization of carboxylic groups, apparently destabilizes such chain conformations, which leads to a pH effect on the photophysical properties identical to that of the long chain polymers. In water, the dynamic data shows the existence of two excimers coexisting with two monomer classes. In methanol and dioxane (good solvents for the pyrene probe) at room temperature, where one excimer and two monomers are present, all rate constants could be obtained, as well as the fractions of ground-state species. It is thus shown that different types of interactions are produced with small- and long-sized PAA polymers, i.e., the size of the polymer matters.

Effect of Aggregation on the Excited-State Electronic Structure of Perylene Studied by Transient Absorption Spectroscopy

The effect of aggregation on the excited-state electronic structure of perylene was studied through transient absorption measurements of isolated molecules, excimers, monomeric crystals (beta-perylene), and dimeric crystals (alpha-perylene). Changes of electronic state were clearly identified from the changes in transient absorption spectra. A detailed investigation was made by combining the obtained results with previous measurements of ground-state absorption and fluorescence spectra. The energy level of the ion-pair state in alpha-perylene crystals was estimated, and the results are compared with previous photoconductivity results. Moreover, the relaxation processes of excited states in alpha-perylene crystals were studied by femtosecond transient absorption measurements.

Application of time- and space-resolved fluorescence spectroscopy to the distribution of guest species into micrometer-sized zeolite crystals

We measured the fluorescence decays and spectra of perylene adsorbed from solution into zeolite X crystals of 2-3 microm in diameter at the level of individual crystals by the application of a microscopy method coupled with a single photon counting apparatus and a multichannel spectrophotometer. We found that both decays and spectra are particle-dependent, i.e. a particle-to-particle difference was observed for the fluorescence decay curves at a fixed loading level along with a particle-dependent spectral change due to the various contribution of excimer emission band relative to those of three monomers. These findings are due to a non-homogeneous distribution which is confirmed by the various emission intensities of perylene-loaded zeolite crystals observed by fluorescence microscopy. Previously, a homogeneous distribution of the guest between zeolite crystals has been just taken for granted and not justified by experiment. The present result suggests that commonly employed collective measurements such as UV-VIS absorption and emission spectroscopies, IR and Raman spectroscopies, and NMR of bulk zeolite powders provide only averaged results and may sometimes suffer from acquiring precise molecular level pictures.

Dynamics and Energetics of the Self-Assembly of a Hydrophobically Modified Polyelectrolyte: Naphthalene-Labeled Poly(Acrylic Acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.

Self-Assembly of Supramolecular Light-Harvesting Arrays from Covalent Multi-Chromophore Perylene-3,4:9,10-bis(dicarboximide) Building Blocks

We report on two multi-chromophore building blocks that self-assemble in solution and on surfaces into supramolecular light-harvesting arrays. Each building block is based on perylene-3,4:9,10-bis(dicarboximide) (PDI) chromophores. In one building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 3 and 6 carbons of pyromellitimide to form a cross-shaped molecule (PI-PDI(4)). In the second building block, N-phenyl PDI chromophores are attached at their para positions to both nitrogens and the 1 and 7 carbons of a fifth PDI to produce a saddle-shaped molecule (PDI(5)). These molecules self-assemble into partially ordered dimeric structures (PI-PDI(4))(2) and (PDI(5))(2) in toluene and 2-methyltetrahydrofuran solutions with the PDI molecules approximately parallel to one another primarily due to pi-pi interactions between adjacent PDI chromophores. On hydrophobic surfaces, PDI(5) grows into rod-shaped nanostructures of average length 130 nm as revealed by atomic force microscopy. Photoexcitation of these supramolecular dimers in solution gives direct evidence of strong pi-pi interactions between the excited PDI chromophore and other PDI molecules nearby based on the observed formation of an excimer-like state in <130 fs with a lifetime of about 20 ns. Multiple photoexcitations of the supramolecular dimers lead to fast singlet-singlet annihilation of the excimer-like state, which occurs with exciton hopping times of about 5 ps, which are comparable to those observed in photosynthetic light-harvesting proteins from green plants.