Bifunctional S-scheme g-C3N4/Bi/BiVO4 hybrid photocatalysts toward artificial carbon cycling

A Comprehensive Review of Graphitic Carbon Nitride (g-C3N4)-Metal Oxide-Based Nanocomposites: Potential for Photocatalysis and Sensing

g-C3N4 has drawn lots of attention due to its photocatalytic activity, low-cost and facile synthesis, and interesting layered structure. However, to improve some of the properties of g-C3N4, such as photochemical stability, electrical band structure, and to decrease charge recombination rate, and towards effective light-harvesting, g-C3N4-metal oxide-based heterojunctions have been introduced. In this review, we initially discussed the preparation, modification, and physical properties of the g-C3N4 and then, we discussed the combination of g-C3N4 with various metal oxides such as TiO2, ZnO, FeO, Fe2O3, Fe3O4, WO3, SnO, SnO2, etc. We summarized some of their characteristic properties of these heterojunctions, their optical features, photocatalytic performance, and electrical band edge positions. This review covers recent advances, including applications in water splitting, CO2 reduction, and photodegradation of organic pollutants, sensors, bacterial disinfection, and supercapacitors. We show that metal oxides can improve the efficiency of the bare g-C3N4 to make the composites suitable for a wide range of applications. Finally, this review provides some perspectives, limitations, and challenges in investigation of g-C3N4-metal-oxide-based heterojunctions.

Visible light responsive metalloporphyrin-sensitized TiO2 nanotube arrays for artificial photosynthesis of methane

A photocatalyst composed of TiO2 nanotube arrays and a porphyrin (metalloporphyrin) was prepared. The improved photocatalytic performance for CO2 reduction is ascribed to the enhanced charge separation and light absorbance.

A novel S-scheme heterojunction based on 0D/3D CeO2/Bi2O2CO3 for photocatalytic degradation of organic pollutants

A distinct S-scheme heterojunction of 0D/3D CeO2/Bi2O2CO3 photocatalyst was successfully synthesized via hydrothermal method employing for photocatalytic degradation of methylene blue (MB), tetracycline (TC) and aureomycin (AM). Compared with bare...

Assembling Ultrafine SnO2 Nanoparticles on MIL-101(Cr) Octahedrons for Efficient Fuel Photocatalytic Denitrification

Effectively reducing the concentration of nitrogen-containing compounds (NCCs) remains a significant but challenging task in environmental restoration. In this work, a novel step-scheme (S-scheme) SnO2@MCr heterojunction was successfully fabricated via a facile hydrothermal method. At this heterojunction, MIL-101(Cr) octahedrons are decorated with highly dispersed SnO2 quantum dots (QDs, approximate size 3 nm). The QDs are evenly wrapped around the MIL-101(Cr), forming an intriguing zero-dimensional/three-dimensional (0D/3D) S-scheme heterostructure. Under simulated sunlight irradiation (280 nm < λ < 980 nm), SnO2@MCr demonstrated superior photoactivity toward the denitrification of pyridine, a typical NCC. The adsorption capacity and adsorption site of SnO2@MCr were also investigated. Tests using 20%SnO2@MCr exhibited much higher activity than that of pure SnO2 and MIL-101(Cr); the reduction ratio of Cr(VI) is rapidly increased to 95% after sunlight irradiation for 4 h. The improvement in the photocatalytic activity is attributed to (i) the high dispersion of SnO2 QDs, (ii) the binding of the rich adsorption sites with pyridine molecules, and (iii) the formation of the S-scheme heterojunction between SnO2 and MIL-101(Cr). Finally, the photocatalytic mechanism of pyridine was elucidated, and the possible intermediate products and degradation pathways were discussed.

DFT Study on Regulating the Electronic Structure and CO2 Reduction Reaction in BiOBr/Sulphur-Doped G-C3N4 S-Scheme Heterojunctions

Photocatalytic CO2 reduction is a promising method to mitigate the greenhouse effect and energy shortage problem. Development of effective photocatalysts is vital in achieving high photocatalytic activity. Herein, the S-scheme heterojunctions composed by BiOBr and g-C3N4 with or without S doping are thoroughly investigated for CO2 reduction by density functional theory (DFT) calculation. Work function and charge density difference demonstrate the existence of a built-in electric field in the system, which contributes to the separation of photogenerated electron-hole pairs. Enhanced strength of a built-in electric field is revealed by analysis of Bader charge and electric field intensity. The results indicate that S doping can tailor the electronic structures and thus improve the photocatalytic activity. According to the change in absorption coefficient, system doping can also endow the heterojunction with increased visible light absorption. The in-depth investigation indicates that the superior CO2 reduction activity is ascribed to low rate-determining energy. And both of the heterojunctions are inclined to generate CH3OH rather than CH4. Furthermore, S doping can further reduce the energy from 1.23 to 0.44 eV, indicating S doping is predicted to be an efficient photocatalyst for reducing CO2 into CH3OH. Therefore, this paper provides a theoretical basis for designing appropriate catalysts through element doping and heterojunction construction.

Synergistic catalysis of BiOIO3 catalyst for elimination of organic pollutants under simultaneous photo-irradiation and ultrasound-vibration treatment

Development of efficiently catalytic strategy for oxidative purification of organic pollutants is of great significance. Photocatalysis has become one of the most important technologies in the past half a century, but the inefficiency of photocatalysts drastically suppresses its practical application. This work proposes a synergistic photopiezocatalysis of BiOIO₃ under simultaneous photo-irradiation and ultrasound-vibration treatment to degrade various organic pollutants. Different from the high recombination of photo-excited charges in photocatalysis, the ultrasound-induced stress deforms the pyroelectric BiOIO₃ to form a piezoelectric potential that drives photo-/thermo-generated free electrons and holes in catalyst to diffuse along opposite directions. In comparison with the single photocatalysis and piezocatalysis, the photopiezocatalysis possesses a synergistic effect, presenting evidently enhanced catalytic performance for decomposing a variety of organic dyes and a persistent organic pollutant 2,4-DCP. No apparent decrease in activity during successive five runs demonstrates that the photopiezocatalysis of BiOIO₃ has a high stability and reusability. Finally, a plausible photopiezocatalysis mechanism is proposed based on the determination of active species produced on catalyst and intermediates during pollutant degradation. Our findings provide a new insight to promote charge separation and meanwhile develop an efficient synergistic photopiezocatalysis for environment remediation.

Rational construction of Ni(OH)2 nanoparticles on covalent triazine-based framework for artificial CO2 reduction

Artificial photoreduction of CO₂ to chemical fuel is an intriguing and reliable strategy to tackle the issues of energy crisis and climate change simultaneously. In the present study, we rationally constructed a Ni(OH)₂-modified covalent triazine-based framework (CTF-1) composites to serve as cocatalyst ensemble for superior photoreduction of CO₂. In particular, the optimal Ni(OH)₂-CTF-1 composites (loading ratio at 0.5 wt%) exhibited superior photocatalytic activity, which surpassed the bare CTF-1 by 33 times when irradiated by visible light. The mechanism for the enhancement was systematically investigated based on various instrumental analyses. The origin of the superior activity was attributable to the enhanced CO₂ capture, more robust visible-light response, and improved charge carrier separation/transfer. This study offers an innovative pathway for the fabrication of noble-metal-free cocatalysts on CTF semiconductors and deepens the understanding of photocatalytic CO₂ reduction.

Recent advances in g-C3N4 composites within four types of heterojunctions for photocatalytic CO2 reduction

Studies of photocatalytic conversion of CO₂ into hydrocarbon fuels, as a promising solution to alleviate global warming and energy issues, are booming in recent years. Researchers have focused their interest in developing g-C₃N₄ composite photocatalysts with intriguing features of robust light harvesting ability, excellent catalysis, and stable performance. Four types of heterojunctions (type-II, Z-scheme, S-scheme and Schottky) of the g-C₃N₄ composites are widely adopted. This review aims at presenting and comparing the photocatalytic mechanisms, characteristics, and performances of g-C₃N₄ composites concerning these four types of heterojunctions. Besides, perspectives and undergoing efforts for further development of g-C₃N₄ composite photocatalysts are discussed. This review would be helpful for researchers to gain a comprehensive understanding of the progress and future development trends of g-C₃N₄ composite heterojunctions for photocatalytic CO₂ reduction.

Insights into the Mechanism of the Bi/BiVO4 Composites for Improved Photocatalytic Activity

The increasing concentration of residual ciprofloxacin (CIP) can cause potential harm to the environment. Photocatalysis has been regarded as an effective method for the degradation of CIP. Bi/BiVO4 with excellent photocatalytic performance was synthesized partial reduction with NaBH4. The structure, morphology, composition, and optical performance of BiVO4 and Bi/BiVO4 were characterized by a variety of techniques. The results showed that the Bi/BiVO4 exhibits high photocatalytic activity in the degradation of CIP. Comparison of BiVO4 and Bi/BiVO4 has lower photoluminescence intensity and higher photocurrent responses intensity. The introduction of Bi made Bi/BiVO4 have a higher charge separation efficiency and generate more active free radicals. In addition, the radical trapping experiments revealed that superoxide free radicals and holes were the main active free radicals during the degradation of CIP. The pathway of CIP degradation was investigated through high performance liquid chromatography-mass spectrometry, and a possible degradation mechanism was proposed.

Photocatalytic Activity of S-Scheme Heterostructure for Hydrogen Production and Organic Pollutant Removal: A Mini-Review

Finding new technologies and materials that provide real alternatives to the environmental and energy-related issues represents a key point on the future sustainability of the industrial activities and society development. The water contamination represents an important problem considering that the quantity and complexity of organic pollutant (such as dyes, pesticides, pharmaceutical active compounds, etc.) molecules can not be efficiently addressed by the traditional wastewater treatments. The use of fossil fuels presents two major disadvantages: (1) environmental pollution and (2) limited stock, which inevitably causes the energy shortage in various countries. A possible answer to the above issues is represented by the photocatalytic technology based on S-scheme heterostructures characterized by the use of light energy in order to degrade organic pollutants or to split the water molecule into its components. The present mini-review aims to outline the most recent achievements in the production and optimization of S-scheme heterostructures for photocatalytic applications. The paper focuses on the influence of heterostructure components and photocatalytic parameters (photocatalyst dosage, light spectra and intensity, irradiation time) on the pollutant removal efficiency and hydrogen evolution rate. Additionally, based on the systematic evaluation of the reported results, several perspectives regarding the future of S-scheme heterostructures were included.

Solar Light-Irradiated Photocatalytic Degradation of Model Dyes and Industrial Dyes by a Magnetic CoFe2O4-gC3N4 S-Scheme Heterojunction Photocatalyst

Magnetic CoFe₂O₄-gC₃N₄ nanocomposites were successfully synthesized, and their photocatalytic activities toward the decomposition of model synthetic dyes (e.g., methylene blue, methyl orange, and Congo red) in the presence of H₂O₂ were evaluated under simulated solar light irradiation. The 50CoFe₂O₄-50gC₃N₄ nanocomposite exhibited the highest catalytic activity. The catalytic activity of 50CoFe₂O₄-50gC₃N₄ toward the photodegradation of some industrially used dyes (such as Drimaren Turquoise CL-B p, Drimaren Yellow CL-2R p, and Drimaren Red CL-5B p) was also examined, and the catalyst exhibited its capability to decompose the industrial dyes completely. An aqueous mixture of these dyes was prepared to mimic the dye-containing wastewater, which was fully photodegraded within 30 min. 50CoFe₂O₄-50gC₃N₄ also exhibited facile magnetic separability from the reaction mixture after the accomplishment of photocatalysis reaction and stable performance after five cycles. The high photocatalytic efficiency to degrade several dyes, including dyes used in textile industries, under solar light irradiation makes 50CoFe₂O₄-50gC₃N₄ a promising photocatalyst for the treatment of dye-containing wastewater discharged from industries.

Au decorated BiVO4 inverse opal for efficient visible light driven water oxidation

Photocatalytic water splitting provides an effective way to prepare hydrogen and oxygen. However, the weak light utilization and sluggish kinetics in the oxygen evolution reaction (OER) process substantially retard the photocatalytic efficiency. In this context, modification of the semiconductors to overcome these limits has been the effective strategy for obtaining highly-efficient photocatalytic water oxidation. Here, plasmonic Au has been loaded onto BiVO4 inverse opal (IO) for photocatalytic water oxidation. It is discovered that the IO structure provides higher specific surface area and favors light absorption on BiVO4. In the meantime, the plasmonic Au can simultaneously enhance the light-utilization capability and photogenerated charge carrier utilization ability of the BiVO4 IO. As a result, a high photocurrent density and long photogenerated charge carrier lifetime can be achieved on the optimized Au-BiVO4 IO, thereby obtaining a superior photocatalytic activity with an oxygen production rate of 9.56 μmol g-1 h-1.

Interface engineering of heterojunction photocatalysts based on 1D nanomaterials

1D nanomaterial-based heterojunctions with unique structures and outstanding physicochemical properties are divided into several types including type II heterojunction, p–n type heterojunction, Schottky junction, Z-type heterojunction, and S-scheme heterojunction.

The influence of ZnO loading amount on the photocatalytic performance of Fe3O4@SiO2@ZnO–Ag composites toward the degradation of organic pollutants and hydrogen evolution

Magnetically reusable Fe3O4@SiO2@ZnO-Ag with well-designed core-shell structure, controllable ZnO loading amount and excellent photocatalytic ability toward organic pollutants degradation and hydrogen evolution were synthesized.

1D/2D Heterostructured Photocatalysts: From Design and Unique Properties to Their Environmental Applications

With the progress of dissimilar dimensional materials, 1D and 2D materials have been extensively investigated as heterogeneous photocatalysts, which realize the unique dimensionality-dependent advantages and mitigate the disadvantages during the environmental and sustainable energy applications. The progress in 1D/2D heterogeneous photocatalysts stems from the combination of different growth modes between 1D and 2D nanostructures and the judicious control to establish the oriented 1D/2D interface. To promote this field, it is necessary to gain insights into the interface engineering in the 1D/2D heterogeneous photocatalysts. This mini-review summarizes the designed synthesis and application of dimensional heterogeneous photocatalysts from 1D and 2D materials. Some typical research to overview the advantages of different types of interface engineered 1D/2D heterogeneous photocatalysts for various photocatalytic processes is highlighted in detail. At last, this review ends by drawing on more design strategies for such 1D/2D heterogeneous photocatalysts, which may inspire further developments of efficient dissimilar dimensional heterogeneous photocatalysts.

Synthesis of EDTA-bridged CdS/g-C3N4 heterostructure photocatalyst with enhanced performance for photoredox reactions

Photocatalytic reactions represent a kind of green and sustainable chemical processes for organic transformations, but the efficiency is limited by the severe recombination and/or inadequate redox potentials of photoinduced charge carriers in photocatalysts. To address these issues, herein, the CdS-EDTA/g-C₃N₄ heterostructures were designed according to Z-scheme photocatalytic mechanism and synthesized by the hydrothermal growth of CdS on g-C₃N₄ nanoflakes with assistance of EDTA chelating agent. EDTA played multiple roles in the formation of CdS-EDTA/g-C₃N₄ heterostructure photocatalysts, such as controlling the morphology of CdS nanostructures, linking CdS and g-C₃N₄ together, and boosting the charge transfer between two semiconductors. The optimized CdS-EDTA/g-C₃N₄(10%) photocatalyst exhibited much higher activities toward the selective reduction of nitrophenol and the selective oxidation of benzyl alcohol, than those of CdS/g-C₃N₄ heterostructures without EDTA. The enhanced photocatalysis of CdS-EDTA/g-C₃N₄ can be ascribed to the efficient separation and suitable photoredox potentials of photoexcited charge carriers in the EDTA-bridged Z-scheme system. This work provides the inspiration for exploring inexpensive organic electron mediators for constructing all-solid-state Z-scheme photocatalysts and demonstrates the enhanced performance of Z-scheme photocatalysts for photoredox reactions of organic transformations.

Hybridized 2D Nanomaterials Toward Highly Efficient Photocatalysis for Degrading Pollutants: Current Status and Future Perspectives

Organic pollutants including industrial dyes and chemicals and agricultural waste have become a major environmental issue in recent years. As an alternative to simple adsorption, photocatalytic decontamination is an efficient and energy-saving technology to eliminate these pollutants from water environment, utilizing the energy of external light, and unique function of photocatalysts. Having a large specific surface area, numerous active sites, and varied band structures, 2D nanosheets have exhibited promising applications as an efficient photocatalyst for degrading organic pollutants, particularly hybridization with other functional components. The novel hybridization of 2D nanomaterials with various functional species is summarized systematically with emphasis on their enhanced photocatalytic activities and outstanding performances in environmental remediation. First, the mechanism of photocatalytic degradation is given for discussing the advantages/shortcomings of regular 2D materials and identifying the importance of constructing hybrid 2D photocatalysts. An overview of several types of intensively investigated 2D nanomaterials (i.e., graphene, g-C₃ N₄ , MoS₂ , WO₃ , Bi₂ O₃ , and BiOX) is then given to indicate their hybridized methodologies, synergistic effect, and improved applications in decontamination of organic dyes and other pollutants. Finally, future research directions are rationally suggested based on the current challenges.

Photocatalytic CO2 reduction of C/ZnO nanofibers enhanced by an Ni-NiS cocatalyst

The photocatalytic reduction of CO₂ into valuable hydrocarbon fuels via solar energy is a promising strategy for carbon utilization. In the present paper, a hierarchical Ni-NiS/C/ZnO photocatalyst was prepared via the in situ photodeposition of compact Ni-NiS nanosheets onto C/ZnO electrospun nanofibers. The existence of metallic Ni and NiS was confirmed by X-ray photoelectron spectroscopy. Photoluminescence (PL) and time-resolved PL spectra revealed that the cocatalyst Ni-NiS enhanced the charge separation efficiency of the C/ZnO nanofibers. The as-prepared Ni-NiS/C/ZnO showed enhanced CO₂ reduction activity, with CO and CH₄ production rates 10 and 15 times greater than those of pristine C/ZnO under 350 W visible light illumination. The intermediates of CH₃O^-, HCHO, and HCOO^- were detected by in situ Fourier transform infrared spectroscopy, confirming that CO₂ reduction is a complex reaction with multiple steps. The ¹³C isotopic tracer method proved that CH₄ and CO were obtained from the reduction of CO₂ rather than from other carbon species in the environment. The amorphous carbon in C/ZnO could promote optical absorption, improve conductivity and reduce the interfacial charge transport resistance. Ni-NiS improved the electron-hole-pair separation of the C/ZnO nanofibers. The observed enhancement in photocatalytic activity was largely attributed to higher light utilization and effective electron-hole separation. This work proves that Ni-NiS is a promising cocatalyst to ZnO for photocatalytic CO₂ reduction.

Preparation of a g-C3N4/Co3O4/Ag2O ternary heterojunction nanocomposite and its photocatalytic activity and mechanism

A g-C₃N₄/Co₃O₄/Ag₂O nanocomposite shows good photocatalytic activities towards the degradation of RhB and H₂O₂ production via the two-electron reduction of oxygen.

Synthesized Z-scheme photocatalyst ZnO/g-C3N4 for enhanced photocatalytic reduction of CO2

ZnO/g-C₃N₄ was prepared by carrying out a simple one-step calcination process.