Characterization and Optimization of Gold Nanoparticle-Based Silver-Enhanced Immunoassays

DNA molecular beacon-based plastic biochip: a versatile and sensitive scanometric detection platform

In this paper, we report a novel DNA molecular beacon (MB)-based plastic biochip platform for scanometric detection of a range of analytical targets. Hairpin DNA strands, which are dually modified with amino and biotin groups at their two ends are immobilized on a disposable plastic (polycarbonate) substrate as recognition element and gold nanoparticle-assisted silver-staining as signal reading protocol. Initially, the immobilized DNA probes are in their folded forms; upon target binding the hairpin secondary structure of the probe strand is "forced" open (i.e., converted to the unfolded state). Nanogold-streptavidin conjugates can then bind the terminal biotin groups and promote the deposition of rather large silver particles which can be either directly visualized or quantified with a standard flatbed scanner. We demonstrate that with properly designed probe sequences and optimized preparation conditions, a range of molecular targets, such as DNA strands, proteins (thrombin) and heavy metal ions (Hg(2+)), can be detected with high sensitivity and excellent selectivity. The detection can be done in both standard physiological buffers and real world samples. This constitutes a platform technology for performing rapid, sensitive, cost-effective, and point-of-care (POC) chemical analysis and medical diagnosis.

Plasmonic biosensors

The unique optical properties of plasmon resonant nanostructures enable exploration of nanoscale environments using relatively simple optical characterization techniques. For this reason, the field of plasmonics continues to garner the attention of the biosensing community. Biosensors based on propagating surface plasmon resonances (SPRs) in films are the most well-recognized plasmonic biosensors, but there is great potential for the new, developing technologies to surpass the robustness and popularity of film-based SPR sensing. This review surveys the current plasmonic biosensor landscape with emphasis on the basic operating principles of each plasmonic sensing technique and the practical considerations when developing a sensing platform with the various techniques. The 'gold standard' film SPR technique is reviewed briefly, but special emphasis is devoted to the up-and-coming localized surface plasmon resonance and plasmonically coupled sensor technology.

Inkjet-printed bioassays for direct reading with a multimode DVD/Blu-Ray optical drive

Compact disc-based bioassays have been developed as novel point-of-care (POC) tools for various applications in chemical analysis and biomedical diagnosis. For the fabrication of assay discs, the surface patterning and sample introduction have been restricted to manual delivery that is unfavorable for on-demand high throughput medical screening. Herein, we have adapted a conventional inkjet printer to prepare bioassays on regular DVD-Rs and accomplished quantitative analysis with a multimode DVD/Blu-Ray optical drive in conjunction with free disc diagnostic software. The feasibility and accuracy of this method have been demonstrated by the quantitative analysis of inkjet-printed biotin-streptavidin binding assays on DVD, which serves as a trial system for other complex, medically relevant sandwich-format or competitive immunoassays.

A novel aptamer-based competition strategy for ultrasensitive electrochemical detection of leukemia cells

A robust, nanobiotechnology-based electrochemical cytosensing platform for the detection of acute leukemia cells was developed with high sensitivity, selectivity, acceptable rapidity and excellent extensibility. It utilized the competitive binding of cell-specific aptamers to acute leukemia cells and subsequent voltammetric quantification of the metal signature. Greatly enhanced sensitivity was achieved with dual signal amplification by using Fe3O4 magnetic nanoparticles (MNPs) as carriers to load a large amount of gold nanoparticles (AuNPs) and AuNP-catalyzed silver deposition. The proposed competitive cytosensor showed high sensitivity with a detection limit down to 10 cells. This simple and low-cost electrochemical cytosensing approach offers great promise to extend its application to early detection of human leukemia and possibly to other cancer cells.

Avanti lipid tools: connecting lipids, technology, and cell biology

Lipid research is challenging owing to the complexity and diversity of the lipidome. Here we review a set of experimental tools developed for the seasoned lipid researcher, as well as, those who are new to the field of lipid research. Novel tools for probing protein-lipid interactions, applications for lipid binding antibodies, enhanced systems for the cellular delivery of lipids, improved visualization of lipid membranes using gold-labeled lipids, and advances in mass spectrometric analysis techniques will be discussed. Because lipid mediators are known to participate in a host of signal transduction and trafficking pathways within the cell, a comprehensive lipid toolbox that aids the science of lipidomics research is essential to better understand the molecular mechanisms of interactions between cellular components. This article is part of a Special Issue entitled Tools to study lipid functions.

A micromotor based on polymer single crystals and nanoparticles: toward functional versatility

We report a multifunctional micromotor fabricated by the self-assembly technique using multifunctional materials, i.e. polymer single crystals and nanoparticles, as basic building blocks. Not only can this micromotor achieve autonomous and directed movement, it also possesses unprecedented functions, including enzymatic degradation-induced micromotor disassembly, sustained release and molecular detection.

An aptamer-based quartz crystal microbalance biosensor for sensitive and selective detection of leukemia cells using silver-enhanced gold nanoparticle label

An aptamer-based quartz crystal microbalance (QCM) biosensor was developed for the selective and sensitive detection of leukemia cells. In this strategy, aminophenylboronic acid-modified gold nanoparticles (APBA-AuNPs) which could bind to cell membrane were used for the labeling of cells followed by silver enhancement, through which significant signal amplification was achieved. Both the QCM and fluorescence microscopy results manifested the selectivity of the sensor designed. A good linear relationship between the frequency response and cell concentration over the range of 2×10(3)-1×10(5)cells/mL was obtained, with a detection limit of 1160cells/mL. This approach provides a simple, rapid, and economical method for leukemia cell analysis which might have great potential for further use.

Contact angle changes induced by immunocomplex formation

Immunoassays analyzing interactions between antigens and antibodies can be affected by capillary action together with binding affinity. This paper studies contact-angle changes of bacterial suspensions on antibody immobilized surfaces. The capillary action and the dried pattern of the bacterial suspensions are analyzed and correlated with specific- and nonspecific bindings between bacteria and antibodies.

An iron–dopamine index predicts risk of parkinsonian neurodegeneration in the substantia nigra pars compacta

Imaging of iron and dopamine by laser ablation-inductively coupled plasma-mass spectrometry reveals a risk index for parkinsonian neurodegeneration

Aptamer-functionalized silver nanoparticles for scanometric detection of platelet-derived growth factor-BB

In this work, we reported a scanometric assay system based on the aptamer-functionalized silver nanoparticles (apt-AgNPs) for detection of platelet-derived growth factor-BB (PDGF-BB) protein. The aptamer and ssDNA were bound with silver nanoparticles by self-assembly of sulfhydryl group at 5' end to form the apt-AgNPs probe. The apt-AgNPs probe can catalyze the reduction of metallic ions in color agent to generate metal deposition that can be captured both by human eyes and a flatbed scanner. Two different color agents, silver enhancer solution and color agent 1 (10 mM HAuCl4+2 mM hydroquinone) were used to develop silver and gold shell on the surface of AgNPs separately. The results demonstrated that the formation of Ag core-Au shell structure had some advantages especially in the low concentrations. The apt-AgNPs probe coupled with color agent 1 showed remarkable superiority in both sensitivity and detection limit compared to the apt-AuNPs system. The apt-AgNPs system also produced a wider linear range from 1.56 ng mL(-1) to 100 ng mL(-1) for PDGF-BB with the detection limit lower than 1.56 ng mL(-1). The present strategy was applied to the determination of PDGF-BB in 10% serum, and the results showed that it had good specificity in complex biological media.

Increased sensitivity of lateral flow immunoassay for ochratoxin A through silver enhancement

Silver nucleation on gold has been exploited for signal amplification and has found application in several qualitative and quantitative bio-sensing techniques, thanks to the simplicity of the method and the high sensitivity achieved. Very recently, this technique has been tentatively applied to improve the performance of gold-based immunoassays. In this work, the exploitation of the signal amplification due to silver deposition on gold nanoparticles has been first applied to a competitive lateral flow immunoassay (LFIA). The signal enhancement due to silver allowed us to strongly reduce the amount of the competitor and of specific antibodies employed to build an LF device for measuring ochratoxin A (OTA), thus permitting the attainment of a highly sensitive assessment of OTA contamination, with a sensitivity gain of more than 10-fold compared to the gold-based LFIA that used the same immunoreagents and to all previously reported LFIA for measuring OTA. In addition, a less sensitive "quantitative" LFIA could be established, by suitably tuning competitor and antibody amounts, which was characterized by reproducible and accurate OTA determinations (RSD% 6-12%, recovery% 82-117%). The quantitative system allowed a reliable OTA quantification in wines and grape musts at the microgram per liter level requested by the European legislation, as demonstrated by a highly results obtained through the quantitative silver-enhanced LFIA and a reference HPLC-FLD on 30 samples.

Resveratrol stabilized gold nanoparticles enable surface loading of doxorubicin and anticancer activity

The green synthesis of gold nanoparticles was achieved by exploiting the antioxidant property of resveratrol (R). The formation of resveratrol stabilized gold nanoparticles (R-GNPs) was confirmed by the observation of the surface plasmon resonance band at 537 nm. The average size of R-GNPs produced in resveratrol medium was ~35nm. The geometrical shape and zeta potential of the gold nanoparticles were spherical and -21.2 mV, respectively. R-GNPs showed excellent stability in saline and other buffers mimicking the physiological pH. The MTT assay using fibroblast cells from explants tissue revealed the biocompatibility of R-GNPs. The cytotoxic activity of doxorubicin loaded R-GNPs against glioma carcinoma cell line (LN 229), showed the suitability of R-GNPs as a carrier for anticancer drugs.

Theoretical analysis of a magnetophoresis-diffusion T-sensor immunoassay

We present the analytical investigation of a microfluidic homogeneous competitive immunoassay that incorporates antibody-conjugated superparamagnetic nanoparticles and magnetophoretic transport to enhance the limits of detection and dynamic range. The analytical model considers the advective, diffusive, and magnetophoretic transport of the antibody-coated nanoparticles relative to the labeled and sample antigens of interest in a T-sensor configuration. The magnetophoresis-diffusion immunoassay identified clear improvements to the assay response and reductions to the limit of detection for increased magnetophoretic velocities and larger nanoparticles. The externally applied magnetophoretic transport enriched the antibody-antigen accumulation region, while larger nanoparticles led to decreased diffusive peak broadening. The integration of nanoparticles to the diffusion immunoassay (NP-DIA) demonstrated an approximately 3-fold improvement to the limit of detection of the basic antibody/antigen system, while the integration of superparamagnetic nanoparticles and magnetophoretic transport (MIA) established an order of magnitude improvement in sensitivity as well as means to greatly reduce response time. The implementation of an external magnetic force enabled the detectable antigen size spectrum to extend from small molecules i.e., 10's Da to 100's Da, up to large proteins and macromolecules, i.e., 50 kDa to 150 kDa, for a single class of binding species, i.e., superparamagnetic nanoparticle. This investigation provides guidelines for the design and development of a magnetophoresis-diffusion T-sensor immunoassay, and clearly identifies the regimes for optimal operation.

FAST: a framework for simulation and analysis of large-scale protein-silicon biosensor circuits

This paper presents a computer aided design (CAD) framework for verification and reliability analysis of protein-silicon hybrid circuits used in biosensors. It is envisioned that similar to integrated circuit (IC) CAD design tools, the proposed framework will be useful for system level optimization of biosensors and for discovery of new sensing modalities without resorting to laborious fabrication and experimental procedures. The framework referred to as FAST analyzes protein-based circuits by solving inverse problems involving stochastic functional elements that admit non-linear relationships between different circuit variables. In this regard, FAST uses a factor-graph netlist as a user interface and solving the inverse problem entails passing messages/signals between the internal nodes of the netlist. Stochastic analysis techniques like density evolution are used to understand the dynamics of the circuit and estimate the reliability of the solution. As an example, we present a complete design flow using FAST for synthesis, analysis and verification of our previously reported conductometric immunoassay that uses antibody-based circuits to implement forward error-correction (FEC).

Reading disc-based bioassays with standard computer drives

Traditional methods of disease diagnosis are both time-consuming and labor-intensive, and many tests require expensive instrumentation and trained professionals, which restricts their use to biomedical laboratories. Because patients can wait several days (even weeks) for the results, the consequences of delayed treatment could be disastrous. Therefore, affordable and simple point-of-care (POC) biosensor devices could fill a diagnostic niche in the clinic or even at home, as personal glucose meters do for diabetics. These devices would allow patients to check their own health conditions and enable physicians to make prompt treatment decisions, which could improve the chances for rapid recovery and cure. Compact discs (CDs) provide inexpensive substrate materials for the preparation of microarray biochips, and conventional computer drives/disc players can be adapted as precise optical reading devices for signal processing. Researchers can employ the polycarbonate (PC) base of a CD as an alternative substrate to glass slides or silicon wafers for the preparation of microanalytical devices. Using the characteristic optical phenomena occurring on the metal layer of a CD, researchers can develop biosensors based on advanced spectroscopic readout (interferometry or surface plasmon resonance). If researchers integrate microfluidic functions with CD mechanics, they can control fluid transfer through the spinning motion of the disc, leading to "lab-on-a-CD" devices. Over the last decade, our laboratory has focused on the construction of POC biosensor devices from off-the-shelf CDs or DVDs and standard computer drives. Besides the initial studies of the suitability of CDs for surface and materials chemistry research (fabrication of self-assembled monolayers and oxide nanostructures), we have demonstrated that an ordinary optical drive, without modification of either the hardware or the software driver, can function as the signal transducing element for reading disc-based bioassays quantitatively. In this Account, we first provide a brief introduction to CD-related materials chemistry and microfluidics research. Then we describe the mild chemistry developed in our laboratory for the preparation of computer-readable biomolecular screening assays: photochemical activation of the polycarbonate (PC) disc surface and immobilization and delivery of probe and target biomolecules. We thoroughly discuss the analysis of the molecular recognition events: researchers can "read" these devices quantitatively with an unmodified optical drive of any personal computer. Finally, and critically, we illustrate our digitized molecular diagnosis approach with three trial systems: DNA hybridization, antibody-antigen binding, and ultrasensitive lead detection with a DNAzyme assay. These examples demonstrate the broad potential of this new analytical/diagnostic tool for medical screening, on-site food/water safety testing, and remote environmental monitoring.

On-chip latex agglutination immunoassay readout by electrochemical impedance spectroscopy

We describe a new class of impedance-based lab-on-chip immunosensors in which the immunoagglutination of latex is monitored by electrochemical impedance spectroscopy (EIS). Antibody-coated latex microspheres agglutinated in the presence of target antigens are precipitated from solution between interdigitated microsized electrodes on a chip. Impedance spectra are reproducibly measured in the 0.1-1 MHz frequency range within several minutes and are shown to be dependent on the aggregate morphology and the sedimentation rates of the agglutinated particles. An equivalent circuit model of the system suggests that the impedance is governed primarily by the electric double layer interactions close to the electrode surface. The effects of sedimentation time, particle type, particle size, and concentration are characterized. The readout method holds promise for developing sensitive miniaturized sensors for rapid immunotesting.

Shedding light on nanomedicine

Light is an electromagnetic radiation that can convert its energy into different forms (e.g., heat, chemical energy, and acoustic waves). This property has been exploited in phototherapy (e.g., photothermal therapy and photodynamic therapy (PDT)) and optical imaging (e.g., fluorescence imaging) for therapeutic and diagnostic purposes. Light-controlled therapies can provide minimally- or noninvasive spatiotemporal control as well as deep tissue penetration. Nanotechnology provides numerous advantages, including selective targeting of tissues, prolongation of therapeutic effect, protection of active payloads, and improved therapeutic indices. This review explores the advances that nanotechnology can bring to light-based therapies and diagnostics, and vice versa, including photo-triggered systems, nanoparticles containing photoactive molecules, and nanoparticles that are themselves photoactive. Limitations of light-based therapies such as photic injury and phototoxicity are discussed.

Highly sensitive detection of proteins based on metal-enhanced fluorescence with novel silver nanostructures

We present a highly sensitive metal enhanced fluorescence (MEF) method based on a novel silver nanostructure fabricated with Cy5-functionalized silver nanoparticles (AgNPs) and AgNO(3). The analytical performance has been demonstrated by microarray detection of streptavidin (SA) and human IgE. The fluorescence intensity can be enhanced substantially with the combined use of AgNPs and fluorescence enhanced solution (FES). Aptamers have been used for the preparation of Tag-C, which demonstrate IgE detection from 0.5 ng/mL to 16 ng/mL, and the limit of detection is determined to be 0.25 ng/mL. SEM images show nanogaps exist in the aggregated silver nanoparticles and the nanogaps allow for the trap of fluorophores in the nanostructures that emit brighter light upon excitation. The silver nanostructures formed by Tags and FES proved to be an excellent platform for MEF of fluorophores whose excitation and emission occurred between 436 nm and 1000 nm. Finite-difference time-domain (FDTD) simulation has been carried out to confirm the enhanced electromagnetic field inside silver nanostructures, leading to strong overlap/resonance coupling and eventual fluorescence enhancement.

A lateral flow assay for quantitative detection of amplified HIV-1 RNA

Although the accessibility of HIV treatment in developing nations has increased dramatically over the past decade, viral load testing to monitor the response of patients receiving therapy is often unavailable. Existing viral load technologies are often too expensive or resource-intensive for poor settings, and there is no appropriate HIV viral load test currently available at the point-of-care in low resource settings. Here, we present a lateral flow assay that employs gold nanoparticle probes and gold enhancement solution to detect amplified HIV RNA quantitatively. Preliminary results show that, when coupled with nucleic acid sequence based amplification (NASBA), this assay can detect concentrations of HIV RNA that match the clinically relevant range of viral loads found in HIV patients. The lateral flow test is inexpensive, simple and rapid to perform, and requires few resources. Our results suggest that the lateral flow assay may be integrated with amplification and sample preparation technologies to serve as an HIV viral load test for low-resource settings.

Scano-magneto immunoassay based on carbon nanotubes/gold nanoparticles nanocomposite for Salmonella enterica serovar Typhimurium detection

To improve sensitivity of S. enterica serovar Typhimurium detection, multiwalled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs) were combined and used as a label to amplify signal in a scanometric based assay. In this study, the MWCNTs/AuNPs nanocomposite was fabricated by directly assemble of Au(3+) to MWCNTs and allowed growing of AuNPs along the MWCNTs surface. This MWCNTs/AuNPs nanocomposite was then attached to anti-S. typhimurium antibody (MWCNTs/AuNPs/Ab(1)) and used as a detecting molecule. Upon binding to Salmonella, they were pre-concentrated by magenetic beads/antibody (MBs/Ab(2)) forming a sandwich immuno-complex which is later spotted on a nitrocellulose membrane coated slide. Silver reduction was applied to amplify signal. The detection limit of 42CFU/ml was achieved when 2% BSA was used as a blocking agent. Given different types of real samples testing, chicken broth was found to give lowest detection limit, followed by orange juice low fat and whole milk. Selectivity testing was performed by using Escherichia coli as interference and found slightly cross-reactivity which could be due to specificity of the Ab used. By virtue of using a slide for multi-samples spotting and a flatbed scanner for signal-read out acquisition, this scano-magneto immunoassay could enable low-cost detection as well as high throughput screening.

Highly sensitive diagnostic assay for the detection of protein biomarkers using microresonators and multifunctional nanoparticles

We developed a novel gravimetric immunoassay for sensitive detection of multiple protein biomarkers using silicon microcantilever arrays and multifunctional hybrid nanoparticles. Magnetic-photocatalytic hybrid nanoparticles with a highly crystalline TiO(2) shell were synthesized using a solvothermal reaction without a calcination process. After functionalizing the hybrid nanoparticles and silicon cantilevers with antibodies, the nanoparticles were used to magnetically separate target biomarkers from human serum. Frequency changes of the microcantilevers due to the binding of the nanoparticles were measured using a dip-and-dry method. Frequency changes were further amplified using a photocatalytic silver reduction reaction. Several biomarkers, including interleukin-6, interferon-γ, and alpha-fetoprotein, were selectively detected using arrays of eight silicon microcantilevers. The detection limit of this assay was ∼0.1 pg/mL, which is superior to the clinical threshold of the biomarkers.

A novel study of antibacterial activity of copper iodide nanoparticle mediated by DNA and membrane damage

In this article potential activity of nanoparticles (NPs) of copper iodide (CuI) as an antibacterial agent has been presented. The nano particles are synthesized by co-precipitation method with an average size of 8 nm as determined by Transmission Electron Microscope (TEM). The average charge of the NPs is -21.5 mV at pH 7 as obtained by zeta potential measurement and purity is determined by XRD. These NPs are able to kill both gram positive and gram negative bacteria. Among the bacteria tested, DH5α is more sensitive but Bacillus subtilis is more resistant to NPs of CuI. Consequently, the MIC and MBC values of DH5α is least (0.066 mg/ml and 0.083 mg/ml respectively) and B. subtilis is highest (0.15 mg/ml and 0.18 mg/ml respectively) among the tested bacterial strains. From our studies it is inferred that CuI NPs produce reactive oxygen species (ROS) in both gram negative and gram positive bacteria and it also causes ROS mediated DNA damage for the suppression of transcription as revealed by reporter gene assay. Probably ROS is formed on the surface of NPs of CuI in presence of amine functional groups of various biological molecules. Furthermore they induce membrane damage as determined by atomic force microscopy (AFM). Thus production of ROS and membrane damage are major mechanisms of the bactericidal activity of these NPs of CuI.

Gold nanoparticles in biomedical applications: recent advances and perspectives

Gold nanoparticles (GNPs) with controlled geometrical, optical, and surface chemical properties are the subject of intensive studies and applications in biology and medicine. To date, the ever increasing diversity of published examples has included genomics and biosensorics, immunoassays and clinical chemistry, photothermolysis of cancer cells and tumors, targeted delivery of drugs and antigens, and optical bioimaging of cells and tissues with state-of-the-art nanophotonic detection systems. This critical review is focused on the application of GNP conjugates to biomedical diagnostics and analytics, photothermal and photodynamic therapies, and delivery of target molecules. Distinct from other published reviews, we present a summary of the immunological properties of GNPs. For each of the above topics, the basic principles, recent advances, and current challenges are discussed (508 references).

A visible light-induced photocatalytic silver enhancement reaction for gravimetric biosensors

We have developed a novel microgravimetric immunosensor using a WO(3) nanoparticle-modified immunoassay and a silver enhancement reaction. When the nanoparticles in silver ion solution (i.e.  AgNO(3)) are exposed to visible light, the silver ions are photocatalytically reduced and form a metallic silver coating on the nanoparticles. This silver coating consequently induces changes in the mass and light absorption spectrum. Although photocatalytic reduction reactions can be achieved using ultraviolet (UV) light and TiO(2) nanoparticles as described in our previous publication (Seo et al 2010 Nanotechnology 21 505502), the use of UV light in biosensing applications has drawbacks in that UV light can damage proteins. In addition, conventional quartz crystal substrates must be passivated to prevent undesirable silver ion reduction on their gold-coated sensing surfaces. We addressed these problems by adopting a visible light-induced photocatalytic silver enhancement method using WO(3) nanoparticles and lateral field excited (LFE) quartz crystals. As a proof-of-concept demonstration of the technique, streptavidin was adsorbed onto an LFE quartz crystal, and its mass was enhanced with biotinylated WO(3) nanoparticles, this being followed by a photocatalytic silver enhancement reaction. The mass change due to the enhancement was found to be > 30 times greater than the mass change obtained with the streptavidin alone.

On-chip collection of particles and cells by AC electroosmotic pumping and dielectrophoresis using asymmetric microelectrodes

The recent development of microfluidic "lab on a chip" devices requiring sample sizes <100 μL has given rise to the need to concentrate dilute samples and trap analytes, especially for surface-based detection techniques. We demonstrate a particle collection device capable of concentrating micron-sized particles in a predetermined area by combining AC electroosmosis (ACEO) and dielectrophoresis (DEP). The planar asymmetric electrode pattern uses ACEO pumping to induce equal, quadrilateral flow directed towards a stagnant region in the center of the device. A number of system parameters affecting particle collection efficiency were investigated including electrode and gap width, chamber height, applied potential and frequency, and number of repeating electrode pairs and electrode geometry. The robustness of the on-chip collection design was evaluated against varying electrolyte concentrations, particle types, and particle sizes. These devices are amenable to integration with a variety of detection techniques such as optical evanescent waveguide sensing.

Nucleic acid-modulated silver nanoparticles: a new electrochemical platform for sensing chloride ion

Inorganic nanomaterials have generated considerable interest in connection to the design of biosensors. Here we exploit the DNA-induced generation of silver nanoparticles for developing an electrical biosensing protocol for chloride ions. Conjugated with thiol modified oligonucleotide, silver nanoparticles were template-synthesized and immobilized on gold electrode. During cyclic voltammogram (CV) scans, the silver nanoparticles were oxidized at high potential to form a layer of Ag/AgCl complex in the presence of Cl(-), giving off sharp solid state redox signals. Under the optimum condition, the electrode responded to Cl(-) over a dynamic range of 2.0 × 10(-5)-0.01 M, with a detection limit of 5.0 × 10(-6) M. Moreover, the specific solubility product constant-based anion recognition made the electrode applicable at a wide pH range and in complex biological systems. To demonstrate the analytical applications of this sensor in real samples, the Cl(-) concentrations in human urine were measured without any sample pretreatment. Urinary Cl(-) detected by the proposed sensor ranged from 110 to 200 mM, which was comparable to the results obtained by standard silver titration.

Surface plasmon resonance imaging detection of silver nanoparticle-tagged immunoglobulin

The detection sensitivity of silver nanoparticle (AgNP)-tagged goat immunoglobulin G (gIgG) microarrays was investigated by studying surface plasmon resonance (SPR) images captured in the visible wavelength range with the help of a Kretchmann-configured optical coupling set-up. The functionalization of anti-gIgG molecules on the AgNP surface was studied using transmission electron microscopy, photon correlation measurements and UV-visible absorption spectroscopy. A value of 1.3×10(7) M(-1) was obtained for the antibody-antigen binding constant by monitoring the binding events at a particular resonance wavelength. The detection limit of this SPR imaging instrument is 6.66 nM of gIgG achieved through signal enhancement by a factor of larger than 4 owing to nanoparticle tagging with the antibody.

Single-step kinase inhibitor screening using a peptide-modified gold nanoparticle platform

Two complementary formats for kinase inhibitor screening are presented in which peptide-modified gold nanoparticles are enzymatically phosphorylated and rapidly aggregate on a surface or in solution by action of phosphospecific antibodies. The simple and rapid colourimetric response of the assays makes them an attractive approach for drug-screening applications.

Quantitative cell bioimaging using gold-nanoshell conjugates and phage antibodies

The authors describe a quantitative evaluation of the efficacy of cell labeling with plasmon-resonant light-scattering nanoparticles used as contrast agents for dark-field microscopy imaging. The experimental model is based on the biospecific labeling of pig embryo kidney (SPEV) cells with primary phage antibodies, followed by the dark-field microscopic visualization using conjugates of silica/gold nanoshells with secondary rabbit antiphage antibodies. To quantify nanoparticle binding, the authors introduce the labeling-efficacy factor (LEF) which is equal to the ratio of the bound-particle pixels per cell to the total number of pixels occupied by the cell. The LEF is calculated by an imaging-analysis algorithm based on the freely available ImageJ Java-based processing code. In terms of the LEF, a distinct difference was found between intact, nonspecifically labeled, and biospecifically labeled cells.

Photocatalytic silver enhancement reaction for gravimetric immunosensors

A novel microgravimetric immunosensor has been developed using TiO(2) nanoparticle-modified immunoassay and silver enhancement reaction. An antibody-conjugated TiO(2) nanoparticle is bound to the AFP antigen immobilized on a quartz resonator. When the nanoparticles are exposed to UV light in a silver nitrate solution, the photocatalytic reduction of silver ions results in the formation of metallic silver onto the nanoparticles and induces a decrease in the resonance frequency. The frequency change by this photocatalytic reduction reaction is three orders of magnitude larger than the change by antigen binding alone. The efficiency of the photocatalytic reaction has been found to increase with the fraction of anatase crystallites in the nanoparticles and the concentration of the AgNO(3) solution. The results highlight the potential of the photocatalytic nanoparticles for the detection of low concentrations of target molecules using gravimetric sensors.

Two-dimensional gradient Ag nanoparticle assemblies: multiscale fabrication and SERS applications

We report a novel method for fabricating silver nanoparticle assemblies with a featured gradient of spatial organizations. The unique step is to generate a gradient of deposit mass by dynamical deposition on a mask-covered substrate with a collimated cluster beam in oblique incidence. Then such gradient can be translated to the gradients of sizes or number densities of the nanoparticles separately, depending on the nature of the substrate surface. Multiscale gradients are implemented from mesoscopic to macroscopic. One-chip rapid detection of the optimal structure for surface enhanced Raman scattering (SERS) is achieved on the gradient assembly with particle number densities.

Aptamer-based PDMS-gold nanoparticle composite as a platform for visual detection of biomolecules with silver enhancement

A sensitive colorimetric detection for biomolecules based on aptamer was described. Poly(dimethylsiloxane) (PDMS)-gold nanoparticles (AuNPs) composite film was used as a platform for immobilizing anti-target aptamer. PDMS-AuNPs composite film only covered with aptamer showed high inhibiting ability towards silver reduction, after target molecules were conjugated on the modified surface, the catalytic efficiency of AuNPs for silver reduction was increased. In this system, the darkness density of silver enhancement was applied for target quantitative measurement. Lysozyme and adenosine 5'-triphosphate (ATP) were tested as the models, quantitative measurements with imaging software or semiquantitative measurements with naked eyes were carried out in the range of 1×10(-2)-1 μg/mL and 1×10(-4)-1×10(3) μg/mL, the volume of reagent using in each assay is 15 μL or less. We speculated that aptamer-target conjugates' inhibition ability for AuNPs' catalytic efficiency toward silver reduction might come from charge and spatial effects. This study can offer a completely novel and relatively general approach for colorimetrical aptamer sensors with good analytical properties and potential applications. The sensor could be coupled with digital transmission of images for remote monitoring system in diagnosis, food control, and environmental analysis.