Label-Free and Enzyme-Free Colorimetric Detection of Pb2+ Based on RNA Cleavage and Annealing-Accelerated Hybridization Chain Reaction

Sensitive photoelectrochemical assay of Pb2+ based on DNAzyme-induced disassembly of the "Z-scheme" TiO2/Au/CdS QDs system

Herein, based on DNAzyme-induced disassembly of the "Z-scheme" TiO₂/Au/CdS QDs system, a facile and sensitive photoelectrochemical biosensor was developed for lead ion assay and a low detection limit of 0.13 pM was obtained.

Recognition-Driven Remodeling of Dual-Split Aptamer Triggering In Situ Hybridization Chain Reaction for Activatable and Autonomous Identification of Cancer Cells

Proximity-dependent hybridization chain reaction (HCR) has shown great potential in sensing biomolecules on the cell surface. However, the requirement of two adjacent bioevents occurring simultaneously limits its application. To solve the problem, split aptamers with target binding ability were introduced to combine with split triggers for initiating HCR, thus producing a novel dual-split aptamer probe (DSAP). By employing cancer-related receptors as models, in situ HCR on a cancer cell surface induced by recognition-driven remodeling of the DSAP was demonstrated. The DSAP consisted of two sequences. Each contained two segments; one derived from split aptamers and the other originated in split triggers. In the presence of target cells, split aptamers reassembled on the cell surface under the "induced-fit effect", thus forcing two split triggers close to each other. The remodeled DSAP worked as an intact trigger, which opened the H1 hairpin probe and then hybridized with the H2 hairpin probe, thus initiating HCR to produce an activated fluorescence signal. As a proof of concept, human liver cancer SMMC-7721 cells and their split ZY11 aptamer were used to construct the DSAP. Results indicated that the DSAP realized sensitive analysis of target cells, permitting the actual detection of 20 cells in the buffer. Moreover, the specific identification of target cells in mixed cell samples and the quantitative analysis of target cells in serum were also achieved. The DSAP strategy is facile and universal, which not only would expand the application range of HCR but also might be developed as a multitarget detection technique for bioanalysis.

Quantitative Analysis of Salmonella typhimurium Based on Elemental-Tags Laser-Induced Breakdown Spectroscopy

Current rapid bacterial detection methods are dedicated to the classification and identification of bacteria. However, there is still a lack of a method for specific quantitative analysis of certain bacteria. In this work, a method based on elemental-tags laser-induced breakdown spectroscopy (ETLIBS) was developed for the rapid and specific quantitative analysis of Salmonella typhimurium (S. ty). Elemental tags were first synthesized by assembling copper nanoparticles (CuNPs) with poly(thymine) (poly-T) template that linked with the aptamer sequence. Under the specific recognition of the aptamer, S. ty can be fully combined with the elemental tags within 30 min to achieve labeling. Afterward, the silicon nanowires (SiNWs) array modified with Au@Ag nanoparticles (SiNWs-Au@Ag) was employed to capture S. ty in 30 min. Attributed to the rapid analysis superiority of ETLIBS mapping, 100 spectra of SiNWs-Au@Ag/S. ty/CuNPs can be obtained in 5 min. It was found that the peak area of the Cu(I) atomic emission line at 324.75 nm fitted by the Voigt profile was linearly related to the bacterial concentration in the range of 10²-10⁶ CFU/mL(R² = 0.978). Furthermore, ETLIBS mapping achieved a low limit of detection (LOD) of 61 CFU/mL and showed good selectivity to S. ty compared with other bacteria. Besides, the method exhibited preeminent detection performance in spiked samples with the recoveries of 87-113%. With the advantages of rapidity, high efficiency, and specificity, the proposed method is expected to be a powerful tool for bacterial detection.

A visual detection of human immunodeficiency virus gene using ratiometric method enabled by phenol red and target-induced catalytic hairpin assembly

Relying on the specific coordination of Ag⁺ and mismatched cytosine-cytosine (C-C), the high-efficiency inhibition of urease by Ag⁺ ion, and the rapid and sensitive response of phenol red to pH, a sensitive ratiometric sensor has been designed for visual detection of human immunodeficiency virus gene (HIV DNA). This sensor utilizes the HIV DNA to initiate catalytic hairpin assembly (CHA) process, releasing Ag⁺ to inhibit subsequent urease-catalyzed urea hydrolysis and prevent the pH of the solution from rising. The CHA process and the absorbance ratio of phenol red at different wavelengths (A₅₅₉/A₄₃₂) amplify the signal, allowing the sensor to detect HIV DNA from 10 to 130 nM in a sensitive and highly selective manner with a low detection limit of 7.8 nM. In addition, this sensor can visually distinguish different concentrations of HIV DNA within a certain range and possesses a good recovery in 1% of serum samples, which will provide new ideas for biosensor design, dipstick test, blood test, and other clinical disease prevention.

Poly-adenine regulated DNA density on AuNPs to construct efficient DNA walker for microRNA-21 detection

DNA-modified gold nanoparticles (AuNPs) are useful nanomaterials for detecting multiple molecules. However, their performance is greatly dependent on the density of probe DNA on the surface of AuNPs. Here, we used Poly-adenine (PolyA) to regulate the surface density of probe DNA to achieve a highly efficient DNA walking biosensor system to detection miRNA-21. The movement track of the biosensor system consists of PolyA-DNA probe was connected to AuNPs, and exonuclease III (Exo III) acted as a motor driving the walker movement to achieve signal amplification. By optimizing the length of PolyA, the surface density of probe DNA was changed, thereby affecting the target binding and enzymatic processing of the bound probes, which ultimately enhanced the sensitivity and reduced timeliness of the DNA walker. Furthermore, the designed PolyA-DNA probe exhibits an outstanding sensitivity, due to the effect of density regulation, which is 7.9 times and 11.1 times lower than those of the SH-DNA and the free-DNA, respectively. In addition, the hairpin structure of DNA probe locates fluorophore at a zone adjacent to AuNPs surface, which reduces the background signal by 1.1 times compared with traditional straight probe. In this work, the biosensor system shows a high selectivity towards miRNA-21. Moreover, the biosensor system has been demonstrated to be potentially useful for the miRNA-21 detection in human serum with the recoveries of 93.2%-110.0% and has high repeatability. Considering these advantages, this PolyA-regulated DNA walking biosensor system has great potential as a routine tool for miRNA detection and has wide applications in the field of biomedical analysis.

DNA branched junctions induced the enhanced fluorescence recovery of FAM-labeled probes on rGO for detecting Pb2

The reduced graphene oxide (rGO) could strongly adsorb and quench the fluorescence of dye-labeled single-stranded DNA (ssDNA); thus, it is widely applied in fluorescent sensors. However, these sensors may suffer from a limited sensitivity due to the low fluorescence recovery when adding the complementary DNA (cDNA) sequence. In this work, the powerful DNA branched junctions were constructed to improve the fluorescence recovery of FAM-labeled probe on rGO. In the presence of target Pb²⁺, the ribonucleotide (rA) in the substrate was cleaved specifically and the catalytic hairpin assembly of three metastable hairpins was further initiated, accompanied by the formation of DNA branched junctions. Then, the liberated Pb²⁺ could be recyclable. Impressively, the DNA branched junctions not only hybridize with the FAM-labeled probes with a high efficiency, but also are significantly undesirable for the rGO. Thus, a high fluorescence recovery of FAM-labeled probe on rGO was expected. The integration of the high fluorescence recovery and dual-cycle signal amplification endows the sensing strategy with a good performance for Pb²⁺ detection, including low detection limit (0.17 nM), good selectivity, and satisfactory practical applicability. The proposed DNA branched junctions offer a novel avenue to improve the fluorescence recovery of the dye-labeled probes on rGO for biological analysis.

DNAzyme–gold nanoparticle-based probes for biosensing and bioimaging

The design and applications of DNAzyme–gold nanoparticle-based probes in biosensing and bioimaging are summarized here.

An Autonomous Nonenzymatic Concatenated DNA Circuit for Amplified Imaging of Intracellular ATP

A robust ATP aptasensor has been successfully constructed for intracellular imaging via the autonomous nonenzymatic cascaded hybridization chain reaction (Ca-HCR) circuit. This compact aptasensor is easily assembled by integrating the sensing module and amplification module, and is furtherly introduced for selective adenosine triphosphate (ATP) assay and for the sensitive tracking of varied ATP expressions in living cells. The ATP-targeting aptamer-encoded sensing module can specifically recognize ATP and release the initiator strand for successively motivating the two-layered HCR (hybridization chain reaction) circuit via the FRET transduction mechanism. The synergistic reaction acceleration of the two HCRs contributes to the high signal gain (amplification efficiency of N²). The whole reaction process was modeled and simulated by MATLAB to deeply explore the underlying molecular reaction mechanism, implying that the cascade HCR is sufficient enough to guarantee the ATP-recognition and amplification processes. The Ca-HCR-amplified aptasensor shows high sensitivity and selectivity for in vitro ATP assay, and can monitor these varied ATP expressions in living cells via intracellular imaging technique. Furthermore, the present aptasensor can be easily extended for monitoring other low-abundance biomarkers, which is especially important for precisely understanding these related biological processes.

Electrochemical lead(II) biosensor by using an ion-dependent split DNAzyme and a template-free DNA extension reaction for signal amplification

A voltammetric biosensor for lead(II) (Pb²⁺) is described that is based on signal amplification by using an ion-dependent split DNAzyme and template-free DNA extension reaction. The Pb²⁺-dependent split DNAzyme was assembled on gold nanoparticles (Au@Fe₃O₄), and this nanoprobe then was exposed to Pb²⁺ which causes the split-off of DNAzymes to release primers containing 3'-OH groups (S₁ and S₂). The template-free DNA extension reaction triggers the generation of long ssDNA nanotails, which then can bind the free redox probe N,N'-bis(2-(trimethylammonium iodide)propylene)perylene-3,4,9,10-tetracarboxyldiimide (PDA⁺) via electrostatic adsorption. Hence, the concentration of PDA⁺ in solution is reduced. Therefore, less free PDA⁺ can be immobilized on a glassy carbon electrode modified with electrodeposited gold nanoparticles (depAu) to produce an electrochemical signal, typically measured at ∼0.38 V (vs. SCE) for quantitation of Pb²⁺. The use of a Pb²⁺-dependent split DNAzyme avoids the usage of a proteinic enzyme. It also increases the sensitivity of the sensor which has a lower detection limit of 30 pM of Pb²⁺. Graphical abstract Novel electrochemical biosensor based on the amplification of ion-dependent split DNAzyme and template-free DNA extension reaction for trace detection of Pb²⁺.

A novel colorimetric aptasensor for detection of chloramphenicol based on lanthanum ion-assisted gold nanoparticle aggregation and smartphone imaging

A label-free, rapid response colorimetric aptasensor for sensitive detection of chloramphenicol (CAP) was proposed, which was based on the strategy of ssDNA-modified gold nanoparticle (AuNP) aggregation assisted by lanthanum (La³⁺) ions. The AuNPs generated a color change that could be monitored in the red, green, and blue and analyzed by the smartphone imaging app. La³⁺, as a trigger agent, strongly combined with the phosphate groups of the surface of ssDNA-AuNPs probe, which helps create AuNP aggregation and the color change of AuNPs from red to blue. On the contrary, when mixing with CAP, the aptamer (Apt) bound to CAP to form a rigid structure of the Apt-CAP complex, and La³⁺ attached to the phosphate groups of the complex, which prevented the aptamer from binding to the surface of the AuNPs. As a result, the color of the AuNPs changed to violet-red. Finally, UV-vis absorption spectroscopy and the smartphone imaging app were employed to determine CAP with a lower detection limit of 7.65 nM and 5.88 nM, respectively. The proposed strategy featuring high selectivity and strong anti-interference ability for detection of CAP in practical samples was achieved. It is worth mentioning that the simple and portable colorimetric aptasensor will be used for facilitating on-site detection of food samples.

Highly sensitive and selective optical sensor for lead ion detection based on liquid crystal decorated with DNAzyme

Lead ions (Pb²⁺) are one of the major environmental pollutants that are dangerous for human health, thus the detection methods of Pb²⁺ become very important as well. However, most reported techniques suffer from drawbacks such as long time, expensive equipment and complicated testing process, which prevent the use of real-time application. Herein, we demonstrate a novel liquid crystal optical sensor for detection of Pb²⁺ based on DNAzyme and its combined strand. The ordered and disordered configuration of liquid crystals, induced by complementary DNA strand and catalytically cleaved DNA in presence of lead ion separately, leads to dark and bright optical image under POM. The proposed naked-eye optical sensor possesses an extremely broad detection range of Pb²⁺ from 50 nM to 500 µM, with a low detection limit about 36.8 nM. The sensor also demonstrates high selectivity of Pb²⁺ from many other metal ions. The proposal LC sensor is highly sensitive and selective for Pb²⁺ detection, which provides a novel platform for other heavy metal, DNAs or antigen in biological and chemical fields by modifying sensing molecules.

Microfluidic Chip for Multiplex Detection of Trace Chemical Contaminants Based on Magnetic Encoded Aptamer Probes and Multibranched DNA Nanostructures as Signal Tags

The development of multiplex assays to simultaneously monitor multiclass chemical contaminants that commonly coexist in foods, such as heavy metal ions, antibiotics, and estrogen residues, is gaining attention. Here, a microfluidic chip (MC)-based multianalysis method coupled with magnetic encoded aptamer probes was used for simultaneous detection of kanamycin, 17β-estradiol, and lead ion (Pb²⁺). Using this innovative strategy, the magnetic bead (MB)-based encoded probes labeled with aptamer hybrid chains were first used to selectively capture multiple targets, followed by generating single-stranded primers. The primers triggered a multibranched hybridization chain reaction (mHCR). Finally, three kinds of complementary strands (C-DNAs) with different lengths were hybridized with the arms of the mHCR products to form three types of multibranched DNA nanostructures. The decrement signals of C-DNAs were employed for qualification of targets. As the signal tags corresponded to different targets, the DNA nanostructures realized "one target for the decrease of massive C-DNAs" to improve sensitivity. The use of MB-based encoded probes could achieve magnetic separation to eliminate interference in the complex. The detection limits of this method were 1.76 × 10^-4 nM (kanamycin), 1.18 × 10^-4 nM (17β-estradiol), and 1.29 × 10^-4 nM (lead ion). Furthermore, the MC platform is reusable and can be used for more than 4000 samples. The assay combining the MC with MB-based encoded probes with multibranched DNA signal tags offers a universal, reusable, and high-throughput detection platform for screening multiclass chemical contaminants in food samples with complex matrices.

Multicolor and Ultrasensitive Enzyme-Linked Immunosorbent Assay Based on the Fluorescence Hybrid Chain Reaction for Simultaneous Detection of Pathogens

Various pathogens may coexist in one sample; however, detection methods that rely on traditional selective culture media or immune agents designed specifically for a certain target are unsuitable for multiple targets. It is important to develop a simultaneous and sensitive detection method for multiple pathogens. Here, a multicolor and ultrasensitive enzyme-linked immunosorbent assay (ELISA) platform based on the fluorescence hybridization chain reaction (HCR) was developed. In the assay, multicolor fluorescence concatemers formed as signal amplifiers and signal reporters in the presence of target pathogens. When HCR occurred, Escherichia coli O157:H7, Salmonella serotype Choleraesuis, and Listeria monocytogenes were detected simultaneously with three different fluorescences. Additionally, the limits of detection for E. coli O157:H7, Salmonella Choleraesuis, and L. monocytogenes were 3.4 × 10¹, 6.4 × 10⁰, and 7.0 × 10¹ CFU/mL, respectively. The assay achieved ultrasensitive, specific, and simultaneous detection of three pathogens and can be applied to the detection of pathogens in milk samples. Therefore, this multicolor and ultrasensitive ELISA platform has great potential in the application of simultaneous detection of pathogens.